summaryrefslogtreecommitdiffstats
path: root/drivers/usb/core
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/core')
-rw-r--r--drivers/usb/core/Kconfig53
-rw-r--r--drivers/usb/core/Makefile2
-rw-r--r--drivers/usb/core/devio.c93
-rw-r--r--drivers/usb/core/driver.c103
-rw-r--r--drivers/usb/core/file.c4
-rw-r--r--drivers/usb/core/hcd.c15
-rw-r--r--drivers/usb/core/hub.c676
-rw-r--r--drivers/usb/core/inode.c748
-rw-r--r--drivers/usb/core/message.c38
-rw-r--r--drivers/usb/core/quirks.c3
-rw-r--r--drivers/usb/core/sysfs.c6
-rw-r--r--drivers/usb/core/urb.c21
-rw-r--r--drivers/usb/core/usb-acpi.c117
-rw-r--r--drivers/usb/core/usb.c9
-rw-r--r--drivers/usb/core/usb.h7
15 files changed, 986 insertions, 909 deletions
diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig
index 18d02e32a3d..9981984b365 100644
--- a/drivers/usb/core/Kconfig
+++ b/drivers/usb/core/Kconfig
@@ -27,58 +27,6 @@ config USB_ANNOUNCE_NEW_DEVICES
comment "Miscellaneous USB options"
depends on USB
-config USB_DEVICEFS
- bool "USB device filesystem (DEPRECATED)"
- depends on USB
- ---help---
- If you say Y here (and to "/proc file system support" in the "File
- systems" section, above), you will get a file /proc/bus/usb/devices
- which lists the devices currently connected to your USB bus or
- busses, and for every connected device a file named
- "/proc/bus/usb/xxx/yyy", where xxx is the bus number and yyy the
- device number; the latter files can be used by user space programs
- to talk directly to the device. These files are "virtual", meaning
- they are generated on the fly and not stored on the hard drive.
-
- You may need to mount the usbfs file system to see the files, use
- mount -t usbfs none /proc/bus/usb
-
- For the format of the various /proc/bus/usb/ files, please read
- <file:Documentation/usb/proc_usb_info.txt>.
-
- Modern Linux systems do not use this.
-
- Usbfs entries are files and not character devices; usbfs can't
- handle Access Control Lists (ACL) which are the default way to
- grant access to USB devices for untrusted users of a desktop
- system.
-
- The usbfs functionality is replaced by real device-nodes managed by
- udev. These nodes lived in /dev/bus/usb and are used by libusb.
-
-config USB_DEVICE_CLASS
- bool "USB device class-devices (DEPRECATED)"
- depends on USB
- default y
- ---help---
- Userspace access to USB devices is granted by device-nodes exported
- directly from the usbdev in sysfs. Old versions of the driver
- core and udev needed additional class devices to export device nodes.
-
- These additional devices are difficult to handle in userspace, if
- information about USB interfaces must be available. One device
- contains the device node, the other device contains the interface
- data. Both devices are at the same level in sysfs (siblings) and one
- can't access the other. The device node created directly by the
- usb device is the parent device of the interface and therefore
- easily accessible from the interface event.
-
- This option provides backward compatibility for libusb device
- nodes (lsusb) when usbfs is not used, and the following udev rule
- doesn't exist:
- SUBSYSTEM=="usb", ACTION=="add", ENV{DEVTYPE}=="usb_device", \
- NAME="bus/usb/$env{BUSNUM}/$env{DEVNUM}", MODE="0644"
-
config USB_DYNAMIC_MINORS
bool "Dynamic USB minor allocation"
depends on USB
@@ -125,7 +73,6 @@ config USB_OTG_WHITELIST
bool "Rely on OTG Targeted Peripherals List"
depends on USB_OTG || EXPERT
default y if USB_OTG
- default n if EXPERT
help
If you say Y here, the "otg_whitelist.h" file will be used as a
product whitelist, so USB peripherals not listed there will be
diff --git a/drivers/usb/core/Makefile b/drivers/usb/core/Makefile
index 507a4e1b636..26059b93dbf 100644
--- a/drivers/usb/core/Makefile
+++ b/drivers/usb/core/Makefile
@@ -9,6 +9,6 @@ usbcore-y += config.o file.o buffer.o sysfs.o endpoint.o
usbcore-y += devio.o notify.o generic.o quirks.o devices.o
usbcore-$(CONFIG_PCI) += hcd-pci.o
-usbcore-$(CONFIG_USB_DEVICEFS) += inode.o
+usbcore-$(CONFIG_ACPI) += usb-acpi.o
obj-$(CONFIG_USB) += usbcore.o
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index 8df4b76465a..e0f107948eb 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -333,17 +333,14 @@ static struct async *async_getcompleted(struct dev_state *ps)
static struct async *async_getpending(struct dev_state *ps,
void __user *userurb)
{
- unsigned long flags;
struct async *as;
- spin_lock_irqsave(&ps->lock, flags);
list_for_each_entry(as, &ps->async_pending, asynclist)
if (as->userurb == userurb) {
list_del_init(&as->asynclist);
- spin_unlock_irqrestore(&ps->lock, flags);
return as;
}
- spin_unlock_irqrestore(&ps->lock, flags);
+
return NULL;
}
@@ -398,6 +395,7 @@ static void cancel_bulk_urbs(struct dev_state *ps, unsigned bulk_addr)
__releases(ps->lock)
__acquires(ps->lock)
{
+ struct urb *urb;
struct async *as;
/* Mark all the pending URBs that match bulk_addr, up to but not
@@ -420,8 +418,11 @@ __acquires(ps->lock)
list_for_each_entry(as, &ps->async_pending, asynclist) {
if (as->bulk_status == AS_UNLINK) {
as->bulk_status = 0; /* Only once */
+ urb = as->urb;
+ usb_get_urb(urb);
spin_unlock(&ps->lock); /* Allow completions */
- usb_unlink_urb(as->urb);
+ usb_unlink_urb(urb);
+ usb_put_urb(urb);
spin_lock(&ps->lock);
goto rescan;
}
@@ -472,6 +473,7 @@ static void async_completed(struct urb *urb)
static void destroy_async(struct dev_state *ps, struct list_head *list)
{
+ struct urb *urb;
struct async *as;
unsigned long flags;
@@ -479,10 +481,13 @@ static void destroy_async(struct dev_state *ps, struct list_head *list)
while (!list_empty(list)) {
as = list_entry(list->next, struct async, asynclist);
list_del_init(&as->asynclist);
+ urb = as->urb;
+ usb_get_urb(urb);
/* drop the spinlock so the completion handler can run */
spin_unlock_irqrestore(&ps->lock, flags);
- usb_kill_urb(as->urb);
+ usb_kill_urb(urb);
+ usb_put_urb(urb);
spin_lock_irqsave(&ps->lock, flags);
}
spin_unlock_irqrestore(&ps->lock, flags);
@@ -727,17 +732,6 @@ static int usbdev_open(struct inode *inode, struct file *file)
if (imajor(inode) == USB_DEVICE_MAJOR)
dev = usbdev_lookup_by_devt(inode->i_rdev);
-#ifdef CONFIG_USB_DEVICEFS
- /* procfs file */
- if (!dev) {
- dev = inode->i_private;
- if (dev && dev->usbfs_dentry &&
- dev->usbfs_dentry->d_inode == inode)
- usb_get_dev(dev);
- else
- dev = NULL;
- }
-#endif
mutex_unlock(&usbfs_mutex);
if (!dev)
@@ -1410,12 +1404,24 @@ static int proc_submiturb(struct dev_state *ps, void __user *arg)
static int proc_unlinkurb(struct dev_state *ps, void __user *arg)
{
+ struct urb *urb;
struct async *as;
+ unsigned long flags;
+ spin_lock_irqsave(&ps->lock, flags);
as = async_getpending(ps, arg);
- if (!as)
+ if (!as) {
+ spin_unlock_irqrestore(&ps->lock, flags);
return -EINVAL;
- usb_kill_urb(as->urb);
+ }
+
+ urb = as->urb;
+ usb_get_urb(urb);
+ spin_unlock_irqrestore(&ps->lock, flags);
+
+ usb_kill_urb(urb);
+ usb_put_urb(urb);
+
return 0;
}
@@ -2062,44 +2068,13 @@ static void usbdev_remove(struct usb_device *udev)
}
}
-#ifdef CONFIG_USB_DEVICE_CLASS
-static struct class *usb_classdev_class;
-
-static int usb_classdev_add(struct usb_device *dev)
-{
- struct device *cldev;
-
- cldev = device_create(usb_classdev_class, &dev->dev, dev->dev.devt,
- NULL, "usbdev%d.%d", dev->bus->busnum,
- dev->devnum);
- if (IS_ERR(cldev))
- return PTR_ERR(cldev);
- dev->usb_classdev = cldev;
- return 0;
-}
-
-static void usb_classdev_remove(struct usb_device *dev)
-{
- if (dev->usb_classdev)
- device_unregister(dev->usb_classdev);
-}
-
-#else
-#define usb_classdev_add(dev) 0
-#define usb_classdev_remove(dev) do {} while (0)
-
-#endif
-
static int usbdev_notify(struct notifier_block *self,
unsigned long action, void *dev)
{
switch (action) {
case USB_DEVICE_ADD:
- if (usb_classdev_add(dev))
- return NOTIFY_BAD;
break;
case USB_DEVICE_REMOVE:
- usb_classdev_remove(dev);
usbdev_remove(dev);
break;
}
@@ -2129,21 +2104,6 @@ int __init usb_devio_init(void)
USB_DEVICE_MAJOR);
goto error_cdev;
}
-#ifdef CONFIG_USB_DEVICE_CLASS
- usb_classdev_class = class_create(THIS_MODULE, "usb_device");
- if (IS_ERR(usb_classdev_class)) {
- printk(KERN_ERR "Unable to register usb_device class\n");
- retval = PTR_ERR(usb_classdev_class);
- cdev_del(&usb_device_cdev);
- usb_classdev_class = NULL;
- goto out;
- }
- /* devices of this class shadow the major:minor of their parent
- * device, so clear ->dev_kobj to prevent adding duplicate entries
- * to /sys/dev
- */
- usb_classdev_class->dev_kobj = NULL;
-#endif
usb_register_notify(&usbdev_nb);
out:
return retval;
@@ -2156,9 +2116,6 @@ error_cdev:
void usb_devio_cleanup(void)
{
usb_unregister_notify(&usbdev_nb);
-#ifdef CONFIG_USB_DEVICE_CLASS
- class_destroy(usb_classdev_class);
-#endif
cdev_del(&usb_device_cdev);
unregister_chrdev_region(USB_DEVICE_DEV, USB_DEVICE_MAX);
}
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index 9a56635dc19..f536aebc958 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -79,6 +79,30 @@ ssize_t usb_store_new_id(struct usb_dynids *dynids,
}
EXPORT_SYMBOL_GPL(usb_store_new_id);
+ssize_t usb_show_dynids(struct usb_dynids *dynids, char *buf)
+{
+ struct usb_dynid *dynid;
+ size_t count = 0;
+
+ list_for_each_entry(dynid, &dynids->list, node)
+ if (dynid->id.bInterfaceClass != 0)
+ count += scnprintf(&buf[count], PAGE_SIZE - count, "%04x %04x %02x\n",
+ dynid->id.idVendor, dynid->id.idProduct,
+ dynid->id.bInterfaceClass);
+ else
+ count += scnprintf(&buf[count], PAGE_SIZE - count, "%04x %04x\n",
+ dynid->id.idVendor, dynid->id.idProduct);
+ return count;
+}
+EXPORT_SYMBOL_GPL(usb_show_dynids);
+
+static ssize_t show_dynids(struct device_driver *driver, char *buf)
+{
+ struct usb_driver *usb_drv = to_usb_driver(driver);
+
+ return usb_show_dynids(&usb_drv->dynids, buf);
+}
+
static ssize_t store_new_id(struct device_driver *driver,
const char *buf, size_t count)
{
@@ -86,7 +110,7 @@ static ssize_t store_new_id(struct device_driver *driver,
return usb_store_new_id(&usb_drv->dynids, driver, buf, count);
}
-static DRIVER_ATTR(new_id, S_IWUSR, NULL, store_new_id);
+static DRIVER_ATTR(new_id, S_IRUGO | S_IWUSR, show_dynids, store_new_id);
/**
* store_remove_id - remove a USB device ID from this driver
@@ -127,7 +151,7 @@ store_remove_id(struct device_driver *driver, const char *buf, size_t count)
return retval;
return count;
}
-static DRIVER_ATTR(remove_id, S_IWUSR, NULL, store_remove_id);
+static DRIVER_ATTR(remove_id, S_IRUGO | S_IWUSR, show_dynids, store_remove_id);
static int usb_create_newid_files(struct usb_driver *usb_drv)
{
@@ -264,6 +288,7 @@ static int usb_probe_interface(struct device *dev)
struct usb_device *udev = interface_to_usbdev(intf);
const struct usb_device_id *id;
int error = -ENODEV;
+ int lpm_disable_error;
dev_dbg(dev, "%s\n", __func__);
@@ -300,6 +325,25 @@ static int usb_probe_interface(struct device *dev)
if (driver->supports_autosuspend)
pm_runtime_enable(dev);
+ /* If the new driver doesn't allow hub-initiated LPM, and we can't
+ * disable hub-initiated LPM, then fail the probe.
+ *
+ * Otherwise, leaving LPM enabled should be harmless, because the
+ * endpoint intervals should remain the same, and the U1/U2 timeouts
+ * should remain the same.
+ *
+ * If we need to install alt setting 0 before probe, or another alt
+ * setting during probe, that should also be fine. usb_set_interface()
+ * will attempt to disable LPM, and fail if it can't disable it.
+ */
+ lpm_disable_error = usb_unlocked_disable_lpm(udev);
+ if (lpm_disable_error && driver->disable_hub_initiated_lpm) {
+ dev_err(&intf->dev, "%s Failed to disable LPM for driver %s\n.",
+ __func__, driver->name);
+ error = lpm_disable_error;
+ goto err;
+ }
+
/* Carry out a deferred switch to altsetting 0 */
if (intf->needs_altsetting0) {
error = usb_set_interface(udev, intf->altsetting[0].
@@ -314,6 +358,11 @@ static int usb_probe_interface(struct device *dev)
goto err;
intf->condition = USB_INTERFACE_BOUND;
+
+ /* If the LPM disable succeeded, balance the ref counts. */
+ if (!lpm_disable_error)
+ usb_unlocked_enable_lpm(udev);
+
usb_autosuspend_device(udev);
return error;
@@ -337,7 +386,7 @@ static int usb_unbind_interface(struct device *dev)
struct usb_driver *driver = to_usb_driver(dev->driver);
struct usb_interface *intf = to_usb_interface(dev);
struct usb_device *udev;
- int error, r;
+ int error, r, lpm_disable_error;
intf->condition = USB_INTERFACE_UNBINDING;
@@ -345,6 +394,13 @@ static int usb_unbind_interface(struct device *dev)
udev = interface_to_usbdev(intf);
error = usb_autoresume_device(udev);
+ /* Hub-initiated LPM policy may change, so attempt to disable LPM until
+ * the driver is unbound. If LPM isn't disabled, that's fine because it
+ * wouldn't be enabled unless all the bound interfaces supported
+ * hub-initiated LPM.
+ */
+ lpm_disable_error = usb_unlocked_disable_lpm(udev);
+
/* Terminate all URBs for this interface unless the driver
* supports "soft" unbinding.
*/
@@ -378,6 +434,10 @@ static int usb_unbind_interface(struct device *dev)
intf->condition = USB_INTERFACE_UNBOUND;
intf->needs_remote_wakeup = 0;
+ /* Attempt to re-enable USB3 LPM, if the disable succeeded. */
+ if (!lpm_disable_error)
+ usb_unlocked_enable_lpm(udev);
+
/* Unbound interfaces are always runtime-PM-disabled and -suspended */
if (driver->supports_autosuspend)
pm_runtime_disable(dev);
@@ -418,17 +478,29 @@ int usb_driver_claim_interface(struct usb_driver *driver,
struct usb_interface *iface, void *priv)
{
struct device *dev = &iface->dev;
+ struct usb_device *udev;
int retval = 0;
+ int lpm_disable_error;
if (dev->driver)
return -EBUSY;
+ udev = interface_to_usbdev(iface);
+
dev->driver = &driver->drvwrap.driver;
usb_set_intfdata(iface, priv);
iface->needs_binding = 0;
iface->condition = USB_INTERFACE_BOUND;
+ /* Disable LPM until this driver is bound. */
+ lpm_disable_error = usb_unlocked_disable_lpm(udev);
+ if (lpm_disable_error && driver->disable_hub_initiated_lpm) {
+ dev_err(&iface->dev, "%s Failed to disable LPM for driver %s\n.",
+ __func__, driver->name);
+ return -ENOMEM;
+ }
+
/* Claimed interfaces are initially inactive (suspended) and
* runtime-PM-enabled, but only if the driver has autosuspend
* support. Otherwise they are marked active, to prevent the
@@ -447,6 +519,10 @@ int usb_driver_claim_interface(struct usb_driver *driver,
if (device_is_registered(dev))
retval = device_bind_driver(dev);
+ /* Attempt to re-enable USB3 LPM, if the disable was successful. */
+ if (!lpm_disable_error)
+ usb_unlocked_enable_lpm(udev);
+
return retval;
}
EXPORT_SYMBOL_GPL(usb_driver_claim_interface);
@@ -726,16 +802,6 @@ static int usb_uevent(struct device *dev, struct kobj_uevent_env *env)
return -ENODEV;
}
-#ifdef CONFIG_USB_DEVICEFS
- /* If this is available, userspace programs can directly read
- * all the device descriptors we don't tell them about. Or
- * act as usermode drivers.
- */
- if (add_uevent_var(env, "DEVICE=/proc/bus/usb/%03d/%03d",
- usb_dev->bus->busnum, usb_dev->devnum))
- return -ENOMEM;
-#endif
-
/* per-device configurations are common */
if (add_uevent_var(env, "PRODUCT=%x/%x/%x",
le16_to_cpu(usb_dev->descriptor.idVendor),
@@ -788,15 +854,13 @@ int usb_register_device_driver(struct usb_device_driver *new_udriver,
retval = driver_register(&new_udriver->drvwrap.driver);
- if (!retval) {
+ if (!retval)
pr_info("%s: registered new device driver %s\n",
usbcore_name, new_udriver->name);
- usbfs_update_special();
- } else {
+ else
printk(KERN_ERR "%s: error %d registering device "
" driver %s\n",
usbcore_name, retval, new_udriver->name);
- }
return retval;
}
@@ -815,7 +879,6 @@ void usb_deregister_device_driver(struct usb_device_driver *udriver)
usbcore_name, udriver->name);
driver_unregister(&udriver->drvwrap.driver);
- usbfs_update_special();
}
EXPORT_SYMBOL_GPL(usb_deregister_device_driver);
@@ -856,8 +919,6 @@ int usb_register_driver(struct usb_driver *new_driver, struct module *owner,
if (retval)
goto out;
- usbfs_update_special();
-
retval = usb_create_newid_files(new_driver);
if (retval)
goto out_newid;
@@ -897,8 +958,6 @@ void usb_deregister(struct usb_driver *driver)
usb_remove_newid_files(driver);
driver_unregister(&driver->drvwrap.driver);
usb_free_dynids(driver);
-
- usbfs_update_special();
}
EXPORT_SYMBOL_GPL(usb_deregister);
diff --git a/drivers/usb/core/file.c b/drivers/usb/core/file.c
index d95760de9e8..e673b26e598 100644
--- a/drivers/usb/core/file.c
+++ b/drivers/usb/core/file.c
@@ -183,7 +183,7 @@ int usb_register_dev(struct usb_interface *intf,
if (retval)
return retval;
- dev_dbg(&intf->dev, "looking for a minor, starting at %d", minor_base);
+ dev_dbg(&intf->dev, "looking for a minor, starting at %d\n", minor_base);
down_write(&minor_rwsem);
for (minor = minor_base; minor < MAX_USB_MINORS; ++minor) {
@@ -239,7 +239,7 @@ void usb_deregister_dev(struct usb_interface *intf,
if (intf->minor == -1)
return;
- dbg ("removing %d minor", intf->minor);
+ dev_dbg(&intf->dev, "removing %d minor\n", intf->minor);
down_write(&minor_rwsem);
usb_minors[intf->minor] = NULL;
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 140d3e11f21..190b1ec7bdc 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -138,7 +138,7 @@ static const u8 usb3_rh_dev_descriptor[18] = {
0x03, /* __u8 bDeviceProtocol; USB 3.0 hub */
0x09, /* __u8 bMaxPacketSize0; 2^9 = 512 Bytes */
- 0x6b, 0x1d, /* __le16 idVendor; Linux Foundation */
+ 0x6b, 0x1d, /* __le16 idVendor; Linux Foundation 0x1d6b */
0x03, 0x00, /* __le16 idProduct; device 0x0003 */
KERNEL_VER, KERNEL_REL, /* __le16 bcdDevice */
@@ -159,7 +159,7 @@ static const u8 usb2_rh_dev_descriptor [18] = {
0x00, /* __u8 bDeviceProtocol; [ usb 2.0 no TT ] */
0x40, /* __u8 bMaxPacketSize0; 64 Bytes */
- 0x6b, 0x1d, /* __le16 idVendor; Linux Foundation */
+ 0x6b, 0x1d, /* __le16 idVendor; Linux Foundation 0x1d6b */
0x02, 0x00, /* __le16 idProduct; device 0x0002 */
KERNEL_VER, KERNEL_REL, /* __le16 bcdDevice */
@@ -182,7 +182,7 @@ static const u8 usb11_rh_dev_descriptor [18] = {
0x00, /* __u8 bDeviceProtocol; [ low/full speeds only ] */
0x40, /* __u8 bMaxPacketSize0; 64 Bytes */
- 0x6b, 0x1d, /* __le16 idVendor; Linux Foundation */
+ 0x6b, 0x1d, /* __le16 idVendor; Linux Foundation 0x1d6b */
0x01, 0x00, /* __le16 idProduct; device 0x0001 */
KERNEL_VER, KERNEL_REL, /* __le16 bcdDevice */
@@ -997,6 +997,15 @@ static int register_root_hub(struct usb_hcd *hcd)
dev_name(&usb_dev->dev), retval);
return (retval < 0) ? retval : -EMSGSIZE;
}
+ if (usb_dev->speed == USB_SPEED_SUPER) {
+ retval = usb_get_bos_descriptor(usb_dev);
+ if (retval < 0) {
+ mutex_unlock(&usb_bus_list_lock);
+ dev_dbg(parent_dev, "can't read %s bos descriptor %d\n",
+ dev_name(&usb_dev->dev), retval);
+ return retval;
+ }
+ }
retval = usb_new_device (usb_dev);
if (retval) {
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index ec6c97dadbe..04fb834c3fa 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -177,6 +177,228 @@ static struct usb_hub *hdev_to_hub(struct usb_device *hdev)
return usb_get_intfdata(hdev->actconfig->interface[0]);
}
+static int usb_device_supports_lpm(struct usb_device *udev)
+{
+ /* USB 2.1 (and greater) devices indicate LPM support through
+ * their USB 2.0 Extended Capabilities BOS descriptor.
+ */
+ if (udev->speed == USB_SPEED_HIGH) {
+ if (udev->bos->ext_cap &&
+ (USB_LPM_SUPPORT &
+ le32_to_cpu(udev->bos->ext_cap->bmAttributes)))
+ return 1;
+ return 0;
+ }
+
+ /* All USB 3.0 must support LPM, but we need their max exit latency
+ * information from the SuperSpeed Extended Capabilities BOS descriptor.
+ */
+ if (!udev->bos->ss_cap) {
+ dev_warn(&udev->dev, "No LPM exit latency info found. "
+ "Power management will be impacted.\n");
+ return 0;
+ }
+ if (udev->parent->lpm_capable)
+ return 1;
+
+ dev_warn(&udev->dev, "Parent hub missing LPM exit latency info. "
+ "Power management will be impacted.\n");
+ return 0;
+}
+
+/*
+ * Set the Maximum Exit Latency (MEL) for the host to initiate a transition from
+ * either U1 or U2.
+ */
+static void usb_set_lpm_mel(struct usb_device *udev,
+ struct usb3_lpm_parameters *udev_lpm_params,
+ unsigned int udev_exit_latency,
+ struct usb_hub *hub,
+ struct usb3_lpm_parameters *hub_lpm_params,
+ unsigned int hub_exit_latency)
+{
+ unsigned int total_mel;
+ unsigned int device_mel;
+ unsigned int hub_mel;
+
+ /*
+ * Calculate the time it takes to transition all links from the roothub
+ * to the parent hub into U0. The parent hub must then decode the
+ * packet (hub header decode latency) to figure out which port it was
+ * bound for.
+ *
+ * The Hub Header decode latency is expressed in 0.1us intervals (0x1
+ * means 0.1us). Multiply that by 100 to get nanoseconds.
+ */
+ total_mel = hub_lpm_params->mel +
+ (hub->descriptor->u.ss.bHubHdrDecLat * 100);
+
+ /*
+ * How long will it take to transition the downstream hub's port into
+ * U0? The greater of either the hub exit latency or the device exit
+ * latency.
+ *
+ * The BOS U1/U2 exit latencies are expressed in 1us intervals.
+ * Multiply that by 1000 to get nanoseconds.
+ */
+ device_mel = udev_exit_latency * 1000;
+ hub_mel = hub_exit_latency * 1000;
+ if (device_mel > hub_mel)
+ total_mel += device_mel;
+ else
+ total_mel += hub_mel;
+
+ udev_lpm_params->mel = total_mel;
+}
+
+/*
+ * Set the maximum Device to Host Exit Latency (PEL) for the device to initiate
+ * a transition from either U1 or U2.
+ */
+static void usb_set_lpm_pel(struct usb_device *udev,
+ struct usb3_lpm_parameters *udev_lpm_params,
+ unsigned int udev_exit_latency,
+ struct usb_hub *hub,
+ struct usb3_lpm_parameters *hub_lpm_params,
+ unsigned int hub_exit_latency,
+ unsigned int port_to_port_exit_latency)
+{
+ unsigned int first_link_pel;
+ unsigned int hub_pel;
+
+ /*
+ * First, the device sends an LFPS to transition the link between the
+ * device and the parent hub into U0. The exit latency is the bigger of
+ * the device exit latency or the hub exit latency.
+ */
+ if (udev_exit_latency > hub_exit_latency)
+ first_link_pel = udev_exit_latency * 1000;
+ else
+ first_link_pel = hub_exit_latency * 1000;
+
+ /*
+ * When the hub starts to receive the LFPS, there is a slight delay for
+ * it to figure out that one of the ports is sending an LFPS. Then it
+ * will forward the LFPS to its upstream link. The exit latency is the
+ * delay, plus the PEL that we calculated for this hub.
+ */
+ hub_pel = port_to_port_exit_latency * 1000 + hub_lpm_params->pel;
+
+ /*
+ * According to figure C-7 in the USB 3.0 spec, the PEL for this device
+ * is the greater of the two exit latencies.
+ */
+ if (first_link_pel > hub_pel)
+ udev_lpm_params->pel = first_link_pel;
+ else
+ udev_lpm_params->pel = hub_pel;
+}
+
+/*
+ * Set the System Exit Latency (SEL) to indicate the total worst-case time from
+ * when a device initiates a transition to U0, until when it will receive the
+ * first packet from the host controller.
+ *
+ * Section C.1.5.1 describes the four components to this:
+ * - t1: device PEL
+ * - t2: time for the ERDY to make it from the device to the host.
+ * - t3: a host-specific delay to process the ERDY.
+ * - t4: time for the packet to make it from the host to the device.
+ *
+ * t3 is specific to both the xHCI host and the platform the host is integrated
+ * into. The Intel HW folks have said it's negligible, FIXME if a different
+ * vendor says otherwise.
+ */
+static void usb_set_lpm_sel(struct usb_device *udev,
+ struct usb3_lpm_parameters *udev_lpm_params)
+{
+ struct usb_device *parent;
+ unsigned int num_hubs;
+ unsigned int total_sel;
+
+ /* t1 = device PEL */
+ total_sel = udev_lpm_params->pel;
+ /* How many external hubs are in between the device & the root port. */
+ for (parent = udev->parent, num_hubs = 0; parent->parent;
+ parent = parent->parent)
+ num_hubs++;
+ /* t2 = 2.1us + 250ns * (num_hubs - 1) */
+ if (num_hubs > 0)
+ total_sel += 2100 + 250 * (num_hubs - 1);
+
+ /* t4 = 250ns * num_hubs */
+ total_sel += 250 * num_hubs;
+
+ udev_lpm_params->sel = total_sel;
+}
+
+static void usb_set_lpm_parameters(struct usb_device *udev)
+{
+ struct usb_hub *hub;
+ unsigned int port_to_port_delay;
+ unsigned int udev_u1_del;
+ unsigned int udev_u2_del;
+ unsigned int hub_u1_del;
+ unsigned int hub_u2_del;
+
+ if (!udev->lpm_capable || udev->speed != USB_SPEED_SUPER)
+ return;
+
+ hub = hdev_to_hub(udev->parent);
+ /* It doesn't take time to transition the roothub into U0, since it
+ * doesn't have an upstream link.
+ */
+ if (!hub)
+ return;
+
+ udev_u1_del = udev->bos->ss_cap->bU1devExitLat;
+ udev_u2_del = udev->bos->ss_cap->bU2DevExitLat;
+ hub_u1_del = udev->parent->bos->ss_cap->bU1devExitLat;
+ hub_u2_del = udev->parent->bos->ss_cap->bU2DevExitLat;
+
+ usb_set_lpm_mel(udev, &udev->u1_params, udev_u1_del,
+ hub, &udev->parent->u1_params, hub_u1_del);
+
+ usb_set_lpm_mel(udev, &udev->u2_params, udev_u2_del,
+ hub, &udev->parent->u2_params, hub_u2_del);
+
+ /*
+ * Appendix C, section C.2.2.2, says that there is a slight delay from
+ * when the parent hub notices the downstream port is trying to
+ * transition to U0 to when the hub initiates a U0 transition on its
+ * upstream port. The section says the delays are tPort2PortU1EL and
+ * tPort2PortU2EL, but it doesn't define what they are.
+ *
+ * The hub chapter, sections 10.4.2.4 and 10.4.2.5 seem to be talking
+ * about the same delays. Use the maximum delay calculations from those
+ * sections. For U1, it's tHubPort2PortExitLat, which is 1us max. For
+ * U2, it's tHubPort2PortExitLat + U2DevExitLat - U1DevExitLat. I
+ * assume the device exit latencies they are talking about are the hub
+ * exit latencies.
+ *
+ * What do we do if the U2 exit latency is less than the U1 exit
+ * latency? It's possible, although not likely...
+ */
+ port_to_port_delay = 1;
+
+ usb_set_lpm_pel(udev, &udev->u1_params, udev_u1_del,
+ hub, &udev->parent->u1_params, hub_u1_del,
+ port_to_port_delay);
+
+ if (hub_u2_del > hub_u1_del)
+ port_to_port_delay = 1 + hub_u2_del - hub_u1_del;
+ else
+ port_to_port_delay = 1 + hub_u1_del;
+
+ usb_set_lpm_pel(udev, &udev->u2_params, udev_u2_del,
+ hub, &udev->parent->u2_params, hub_u2_del,
+ port_to_port_delay);
+
+ /* Now that we've got PEL, calculate SEL. */
+ usb_set_lpm_sel(udev, &udev->u1_params);
+ usb_set_lpm_sel(udev, &udev->u2_params);
+}
+
/* USB 2.0 spec Section 11.24.4.5 */
static int get_hub_descriptor(struct usb_device *hdev, void *data)
{
@@ -2480,6 +2702,12 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg)
if (udev->usb2_hw_lpm_enabled == 1)
usb_set_usb2_hardware_lpm(udev, 0);
+ if (usb_unlocked_disable_lpm(udev)) {
+ dev_err(&udev->dev, "%s Failed to disable LPM before suspend\n.",
+ __func__);
+ return -ENOMEM;
+ }
+
/* see 7.1.7.6 */
if (hub_is_superspeed(hub->hdev))
status = set_port_feature(hub->hdev,
@@ -2499,6 +2727,13 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg)
NULL, 0,
USB_CTRL_SET_TIMEOUT);
+ /* Try to enable USB2 hardware LPM again */
+ if (udev->usb2_hw_lpm_capable == 1)
+ usb_set_usb2_hardware_lpm(udev, 1);
+
+ /* Try to enable USB3 LPM again */
+ usb_unlocked_enable_lpm(udev);
+
/* System sleep transitions should never fail */
if (!PMSG_IS_AUTO(msg))
status = 0;
@@ -2696,6 +2931,9 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg)
/* Try to enable USB2 hardware LPM */
if (udev->usb2_hw_lpm_capable == 1)
usb_set_usb2_hardware_lpm(udev, 1);
+
+ /* Try to enable USB3 LPM */
+ usb_unlocked_enable_lpm(udev);
}
return status;
@@ -2824,11 +3062,429 @@ void usb_root_hub_lost_power(struct usb_device *rhdev)
}
EXPORT_SYMBOL_GPL(usb_root_hub_lost_power);
+static const char * const usb3_lpm_names[] = {
+ "U0",
+ "U1",
+ "U2",
+ "U3",
+};
+
+/*
+ * Send a Set SEL control transfer to the device, prior to enabling
+ * device-initiated U1 or U2. This lets the device know the exit latencies from
+ * the time the device initiates a U1 or U2 exit, to the time it will receive a
+ * packet from the host.
+ *
+ * This function will fail if the SEL or PEL values for udev are greater than
+ * the maximum allowed values for the link state to be enabled.
+ */
+static int usb_req_set_sel(struct usb_device *udev, enum usb3_link_state state)
+{
+ struct usb_set_sel_req *sel_values;
+ unsigned long long u1_sel;
+ unsigned long long u1_pel;
+ unsigned long long u2_sel;
+ unsigned long long u2_pel;
+ int ret;
+
+ /* Convert SEL and PEL stored in ns to us */
+ u1_sel = DIV_ROUND_UP(udev->u1_params.sel, 1000);
+ u1_pel = DIV_ROUND_UP(udev->u1_params.pel, 1000);
+ u2_sel = DIV_ROUND_UP(udev->u2_params.sel, 1000);
+ u2_pel = DIV_ROUND_UP(udev->u2_params.pel, 1000);
+
+ /*
+ * Make sure that the calculated SEL and PEL values for the link
+ * state we're enabling aren't bigger than the max SEL/PEL
+ * value that will fit in the SET SEL control transfer.
+ * Otherwise the device would get an incorrect idea of the exit
+ * latency for the link state, and could start a device-initiated
+ * U1/U2 when the exit latencies are too high.
+ */
+ if ((state == USB3_LPM_U1 &&
+ (u1_sel > USB3_LPM_MAX_U1_SEL_PEL ||
+ u1_pel > USB3_LPM_MAX_U1_SEL_PEL)) ||
+ (state == USB3_LPM_U2 &&
+ (u2_sel > USB3_LPM_MAX_U2_SEL_PEL ||
+ u2_pel > USB3_LPM_MAX_U2_SEL_PEL))) {
+ dev_dbg(&udev->dev, "Device-initiated %s disabled due "
+ "to long SEL %llu ms or PEL %llu ms\n",
+ usb3_lpm_names[state], u1_sel, u1_pel);
+ return -EINVAL;
+ }
+
+ /*
+ * If we're enabling device-initiated LPM for one link state,
+ * but the other link state has a too high SEL or PEL value,
+ * just set those values to the max in the Set SEL request.
+ */
+ if (u1_sel > USB3_LPM_MAX_U1_SEL_PEL)
+ u1_sel = USB3_LPM_MAX_U1_SEL_PEL;
+
+ if (u1_pel > USB3_LPM_MAX_U1_SEL_PEL)
+ u1_pel = USB3_LPM_MAX_U1_SEL_PEL;
+
+ if (u2_sel > USB3_LPM_MAX_U2_SEL_PEL)
+ u2_sel = USB3_LPM_MAX_U2_SEL_PEL;
+
+ if (u2_pel > USB3_LPM_MAX_U2_SEL_PEL)
+ u2_pel = USB3_LPM_MAX_U2_SEL_PEL;
+
+ /*
+ * usb_enable_lpm() can be called as part of a failed device reset,
+ * which may be initiated by an error path of a mass storage driver.
+ * Therefore, use GFP_NOIO.
+ */
+ sel_values = kmalloc(sizeof *(sel_values), GFP_NOIO);
+ if (!sel_values)
+ return -ENOMEM;
+
+ sel_values->u1_sel = u1_sel;
+ sel_values->u1_pel = u1_pel;
+ sel_values->u2_sel = cpu_to_le16(u2_sel);
+ sel_values->u2_pel = cpu_to_le16(u2_pel);
+
+ ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+ USB_REQ_SET_SEL,
+ USB_RECIP_DEVICE,
+ 0, 0,
+ sel_values, sizeof *(sel_values),
+ USB_CTRL_SET_TIMEOUT);
+ kfree(sel_values);
+ return ret;
+}
+
+/*
+ * Enable or disable device-initiated U1 or U2 transitions.
+ */
+static int usb_set_device_initiated_lpm(struct usb_device *udev,
+ enum usb3_link_state state, bool enable)
+{
+ int ret;
+ int feature;
+
+ switch (state) {
+ case USB3_LPM_U1:
+ feature = USB_DEVICE_U1_ENABLE;
+ break;
+ case USB3_LPM_U2:
+ feature = USB_DEVICE_U2_ENABLE;
+ break;
+ default:
+ dev_warn(&udev->dev, "%s: Can't %s non-U1 or U2 state.\n",
+ __func__, enable ? "enable" : "disable");
+ return -EINVAL;
+ }
+
+ if (udev->state != USB_STATE_CONFIGURED) {
+ dev_dbg(&udev->dev, "%s: Can't %s %s state "
+ "for unconfigured device.\n",
+ __func__, enable ? "enable" : "disable",
+ usb3_lpm_names[state]);
+ return 0;
+ }
+
+ if (enable) {
+ /*
+ * First, let the device know about the exit latencies
+ * associated with the link state we're about to enable.
+ */
+ ret = usb_req_set_sel(udev, state);
+ if (ret < 0) {
+ dev_warn(&udev->dev, "Set SEL for device-initiated "
+ "%s failed.\n", usb3_lpm_names[state]);
+ return -EBUSY;
+ }
+ /*
+ * Now send the control transfer to enable device-initiated LPM
+ * for either U1 or U2.
+ */
+ ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+ USB_REQ_SET_FEATURE,
+ USB_RECIP_DEVICE,
+ feature,
+ 0, NULL, 0,
+ USB_CTRL_SET_TIMEOUT);
+ } else {
+ ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+ USB_REQ_CLEAR_FEATURE,
+ USB_RECIP_DEVICE,
+ feature,
+ 0, NULL, 0,
+ USB_CTRL_SET_TIMEOUT);
+ }
+ if (ret < 0) {
+ dev_warn(&udev->dev, "%s of device-initiated %s failed.\n",
+ enable ? "Enable" : "Disable",
+ usb3_lpm_names[state]);
+ return -EBUSY;
+ }
+ return 0;
+}
+
+static int usb_set_lpm_timeout(struct usb_device *udev,
+ enum usb3_link_state state, int timeout)
+{
+ int ret;
+ int feature;
+
+ switch (state) {
+ case USB3_LPM_U1:
+ feature = USB_PORT_FEAT_U1_TIMEOUT;
+ break;
+ case USB3_LPM_U2:
+ feature = USB_PORT_FEAT_U2_TIMEOUT;
+ break;
+ default:
+ dev_warn(&udev->dev, "%s: Can't set timeout for non-U1 or U2 state.\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ if (state == USB3_LPM_U1 && timeout > USB3_LPM_U1_MAX_TIMEOUT &&
+ timeout != USB3_LPM_DEVICE_INITIATED) {
+ dev_warn(&udev->dev, "Failed to set %s timeout to 0x%x, "
+ "which is a reserved value.\n",
+ usb3_lpm_names[state], timeout);
+ return -EINVAL;
+ }
+
+ ret = set_port_feature(udev->parent,
+ USB_PORT_LPM_TIMEOUT(timeout) | udev->portnum,
+ feature);
+ if (ret < 0) {
+ dev_warn(&udev->dev, "Failed to set %s timeout to 0x%x,"
+ "error code %i\n", usb3_lpm_names[state],
+ timeout, ret);
+ return -EBUSY;
+ }
+ if (state == USB3_LPM_U1)
+ udev->u1_params.timeout = timeout;
+ else
+ udev->u2_params.timeout = timeout;
+ return 0;
+}
+
+/*
+ * Enable the hub-initiated U1/U2 idle timeouts, and enable device-initiated
+ * U1/U2 entry.
+ *
+ * We will attempt to enable U1 or U2, but there are no guarantees that the
+ * control transfers to set the hub timeout or enable device-initiated U1/U2
+ * will be successful.
+ *
+ * If we cannot set the parent hub U1/U2 timeout, we attempt to let the xHCI
+ * driver know about it. If that call fails, it should be harmless, and just
+ * take up more slightly more bus bandwidth for unnecessary U1/U2 exit latency.
+ */
+static void usb_enable_link_state(struct usb_hcd *hcd, struct usb_device *udev,
+ enum usb3_link_state state)
+{
+ int timeout;
+
+ /* We allow the host controller to set the U1/U2 timeout internally
+ * first, so that it can change its schedule to account for the
+ * additional latency to send data to a device in a lower power
+ * link state.
+ */
+ timeout = hcd->driver->enable_usb3_lpm_timeout(hcd, udev, state);
+
+ /* xHCI host controller doesn't want to enable this LPM state. */
+ if (timeout == 0)
+ return;
+
+ if (timeout < 0) {
+ dev_warn(&udev->dev, "Could not enable %s link state, "
+ "xHCI error %i.\n", usb3_lpm_names[state],
+ timeout);
+ return;
+ }
+
+ if (usb_set_lpm_timeout(udev, state, timeout))
+ /* If we can't set the parent hub U1/U2 timeout,
+ * device-initiated LPM won't be allowed either, so let the xHCI
+ * host know that this link state won't be enabled.
+ */
+ hcd->driver->disable_usb3_lpm_timeout(hcd, udev, state);
+
+ /* Only a configured device will accept the Set Feature U1/U2_ENABLE */
+ else if (udev->actconfig)
+ usb_set_device_initiated_lpm(udev, state, true);
+
+}
+
+/*
+ * Disable the hub-initiated U1/U2 idle timeouts, and disable device-initiated
+ * U1/U2 entry.
+ *
+ * If this function returns -EBUSY, the parent hub will still allow U1/U2 entry.
+ * If zero is returned, the parent will not allow the link to go into U1/U2.
+ *
+ * If zero is returned, device-initiated U1/U2 entry may still be enabled, but
+ * it won't have an effect on the bus link state because the parent hub will
+ * still disallow device-initiated U1/U2 entry.
+ *
+ * If zero is returned, the xHCI host controller may still think U1/U2 entry is
+ * possible. The result will be slightly more bus bandwidth will be taken up
+ * (to account for U1/U2 exit latency), but it should be harmless.
+ */
+static int usb_disable_link_state(struct usb_hcd *hcd, struct usb_device *udev,
+ enum usb3_link_state state)
+{
+ int feature;
+
+ switch (state) {
+ case USB3_LPM_U1:
+ feature = USB_PORT_FEAT_U1_TIMEOUT;
+ break;
+ case USB3_LPM_U2:
+ feature = USB_PORT_FEAT_U2_TIMEOUT;
+ break;
+ default:
+ dev_warn(&udev->dev, "%s: Can't disable non-U1 or U2 state.\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ if (usb_set_lpm_timeout(udev, state, 0))
+ return -EBUSY;
+
+ usb_set_device_initiated_lpm(udev, state, false);
+
+ if (hcd->driver->disable_usb3_lpm_timeout(hcd, udev, state))
+ dev_warn(&udev->dev, "Could not disable xHCI %s timeout, "
+ "bus schedule bandwidth may be impacted.\n",
+ usb3_lpm_names[state]);
+ return 0;
+}
+
+/*
+ * Disable hub-initiated and device-initiated U1 and U2 entry.
+ * Caller must own the bandwidth_mutex.
+ *
+ * This will call usb_enable_lpm() on failure, which will decrement
+ * lpm_disable_count, and will re-enable LPM if lpm_disable_count reaches zero.
+ */
+int usb_disable_lpm(struct usb_device *udev)
+{
+ struct usb_hcd *hcd;
+
+ if (!udev || !udev->parent ||
+ udev->speed != USB_SPEED_SUPER ||
+ !udev->lpm_capable)
+ return 0;
+
+ hcd = bus_to_hcd(udev->bus);
+ if (!hcd || !hcd->driver->disable_usb3_lpm_timeout)
+ return 0;
+
+ udev->lpm_disable_count++;
+ if ((udev->u1_params.timeout == 0 && udev->u1_params.timeout == 0))
+ return 0;
+
+ /* If LPM is enabled, attempt to disable it. */
+ if (usb_disable_link_state(hcd, udev, USB3_LPM_U1))
+ goto enable_lpm;
+ if (usb_disable_link_state(hcd, udev, USB3_LPM_U2))
+ goto enable_lpm;
+
+ return 0;
+
+enable_lpm:
+ usb_enable_lpm(udev);
+ return -EBUSY;
+}
+EXPORT_SYMBOL_GPL(usb_disable_lpm);
+
+/* Grab the bandwidth_mutex before calling usb_disable_lpm() */
+int usb_unlocked_disable_lpm(struct usb_device *udev)
+{
+ struct usb_hcd *hcd = bus_to_hcd(udev->bus);
+ int ret;
+
+ if (!hcd)
+ return -EINVAL;
+
+ mutex_lock(hcd->bandwidth_mutex);
+ ret = usb_disable_lpm(udev);
+ mutex_unlock(hcd->bandwidth_mutex);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(usb_unlocked_disable_lpm);
+
+/*
+ * Attempt to enable device-initiated and hub-initiated U1 and U2 entry. The
+ * xHCI host policy may prevent U1 or U2 from being enabled.
+ *
+ * Other callers may have disabled link PM, so U1 and U2 entry will be disabled
+ * until the lpm_disable_count drops to zero. Caller must own the
+ * bandwidth_mutex.
+ */
+void usb_enable_lpm(struct usb_device *udev)
+{
+ struct usb_hcd *hcd;
+
+ if (!udev || !udev->parent ||
+ udev->speed != USB_SPEED_SUPER ||
+ !udev->lpm_capable)
+ return;
+
+ udev->lpm_disable_count--;
+ hcd = bus_to_hcd(udev->bus);
+ /* Double check that we can both enable and disable LPM.
+ * Device must be configured to accept set feature U1/U2 timeout.
+ */
+ if (!hcd || !hcd->driver->enable_usb3_lpm_timeout ||
+ !hcd->driver->disable_usb3_lpm_timeout)
+ return;
+
+ if (udev->lpm_disable_count > 0)
+ return;
+
+ usb_enable_link_state(hcd, udev, USB3_LPM_U1);
+ usb_enable_link_state(hcd, udev, USB3_LPM_U2);
+}
+EXPORT_SYMBOL_GPL(usb_enable_lpm);
+
+/* Grab the bandwidth_mutex before calling usb_enable_lpm() */
+void usb_unlocked_enable_lpm(struct usb_device *udev)
+{
+ struct usb_hcd *hcd = bus_to_hcd(udev->bus);
+
+ if (!hcd)
+ return;
+
+ mutex_lock(hcd->bandwidth_mutex);
+ usb_enable_lpm(udev);
+ mutex_unlock(hcd->bandwidth_mutex);
+}
+EXPORT_SYMBOL_GPL(usb_unlocked_enable_lpm);
+
+
#else /* CONFIG_PM */
#define hub_suspend NULL
#define hub_resume NULL
#define hub_reset_resume NULL
+
+int usb_disable_lpm(struct usb_device *udev)
+{
+ return 0;
+}
+EXPORT_SYMBOL_GPL(usb_disable_lpm);
+
+void usb_enable_lpm(struct usb_device *udev) { }
+EXPORT_SYMBOL_GPL(usb_enable_lpm);
+
+int usb_unlocked_disable_lpm(struct usb_device *udev)
+{
+ return 0;
+}
+EXPORT_SYMBOL_GPL(usb_unlocked_disable_lpm);
+
+void usb_unlocked_enable_lpm(struct usb_device *udev) { }
+EXPORT_SYMBOL_GPL(usb_unlocked_enable_lpm);
#endif
@@ -3208,9 +3864,8 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
if (udev->wusb == 0 && le16_to_cpu(udev->descriptor.bcdUSB) >= 0x0201) {
retval = usb_get_bos_descriptor(udev);
if (!retval) {
- if (udev->bos->ext_cap && (USB_LPM_SUPPORT &
- le32_to_cpu(udev->bos->ext_cap->bmAttributes)))
- udev->lpm_capable = 1;
+ udev->lpm_capable = usb_device_supports_lpm(udev);
+ usb_set_lpm_parameters(udev);
}
}
@@ -4042,11 +4697,22 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
goto done;
mutex_lock(hcd->bandwidth_mutex);
+ /* Disable LPM while we reset the device and reinstall the alt settings.
+ * Device-initiated LPM settings, and system exit latency settings are
+ * cleared when the device is reset, so we have to set them up again.
+ */
+ ret = usb_disable_lpm(udev);
+ if (ret) {
+ dev_err(&udev->dev, "%s Failed to disable LPM\n.", __func__);
+ mutex_unlock(hcd->bandwidth_mutex);
+ goto done;
+ }
ret = usb_hcd_alloc_bandwidth(udev, udev->actconfig, NULL, NULL);
if (ret < 0) {
dev_warn(&udev->dev,
"Busted HC? Not enough HCD resources for "
"old configuration.\n");
+ usb_enable_lpm(udev);
mutex_unlock(hcd->bandwidth_mutex);
goto re_enumerate;
}
@@ -4058,6 +4724,7 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
dev_err(&udev->dev,
"can't restore configuration #%d (error=%d)\n",
udev->actconfig->desc.bConfigurationValue, ret);
+ usb_enable_lpm(udev);
mutex_unlock(hcd->bandwidth_mutex);
goto re_enumerate;
}
@@ -4096,10 +4763,13 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
desc->bInterfaceNumber,
desc->bAlternateSetting,
ret);
+ usb_unlocked_enable_lpm(udev);
goto re_enumerate;
}
}
+ /* Now that the alt settings are re-installed, enable LPM. */
+ usb_unlocked_enable_lpm(udev);
done:
return 0;
diff --git a/drivers/usb/core/inode.c b/drivers/usb/core/inode.c
deleted file mode 100644
index d2b9af59cba..00000000000
--- a/drivers/usb/core/inode.c
+++ /dev/null
@@ -1,748 +0,0 @@
-/*****************************************************************************/
-
-/*
- * inode.c -- Inode/Dentry functions for the USB device file system.
- *
- * Copyright (C) 2000 Thomas Sailer (sailer@ife.ee.ethz.ch)
- * Copyright (C) 2001,2002,2004 Greg Kroah-Hartman (greg@kroah.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * History:
- * 0.1 04.01.2000 Created
- * 0.2 10.12.2001 converted to use the vfs layer better
- */
-
-/*****************************************************************************/
-
-#include <linux/module.h>
-#include <linux/fs.h>
-#include <linux/mount.h>
-#include <linux/pagemap.h>
-#include <linux/init.h>
-#include <linux/proc_fs.h>
-#include <linux/usb.h>
-#include <linux/namei.h>
-#include <linux/usbdevice_fs.h>
-#include <linux/parser.h>
-#include <linux/notifier.h>
-#include <linux/seq_file.h>
-#include <linux/usb/hcd.h>
-#include <asm/byteorder.h>
-#include "usb.h"
-
-#define USBFS_DEFAULT_DEVMODE (S_IWUSR | S_IRUGO)
-#define USBFS_DEFAULT_BUSMODE (S_IXUGO | S_IRUGO)
-#define USBFS_DEFAULT_LISTMODE S_IRUGO
-
-static const struct file_operations default_file_operations;
-static struct vfsmount *usbfs_mount;
-static int usbfs_mount_count; /* = 0 */
-
-static struct dentry *devices_usbfs_dentry;
-static int num_buses; /* = 0 */
-
-static uid_t devuid; /* = 0 */
-static uid_t busuid; /* = 0 */
-static uid_t listuid; /* = 0 */
-static gid_t devgid; /* = 0 */
-static gid_t busgid; /* = 0 */
-static gid_t listgid; /* = 0 */
-static umode_t devmode = USBFS_DEFAULT_DEVMODE;
-static umode_t busmode = USBFS_DEFAULT_BUSMODE;
-static umode_t listmode = USBFS_DEFAULT_LISTMODE;
-
-static int usbfs_show_options(struct seq_file *seq, struct dentry *root)
-{
- if (devuid != 0)
- seq_printf(seq, ",devuid=%u", devuid);
- if (devgid != 0)
- seq_printf(seq, ",devgid=%u", devgid);
- if (devmode != USBFS_DEFAULT_DEVMODE)
- seq_printf(seq, ",devmode=%o", devmode);
- if (busuid != 0)
- seq_printf(seq, ",busuid=%u", busuid);
- if (busgid != 0)
- seq_printf(seq, ",busgid=%u", busgid);
- if (busmode != USBFS_DEFAULT_BUSMODE)
- seq_printf(seq, ",busmode=%o", busmode);
- if (listuid != 0)
- seq_printf(seq, ",listuid=%u", listuid);
- if (listgid != 0)
- seq_printf(seq, ",listgid=%u", listgid);
- if (listmode != USBFS_DEFAULT_LISTMODE)
- seq_printf(seq, ",listmode=%o", listmode);
-
- return 0;
-}
-
-enum {
- Opt_devuid, Opt_devgid, Opt_devmode,
- Opt_busuid, Opt_busgid, Opt_busmode,
- Opt_listuid, Opt_listgid, Opt_listmode,
- Opt_err,
-};
-
-static const match_table_t tokens = {
- {Opt_devuid, "devuid=%u"},
- {Opt_devgid, "devgid=%u"},
- {Opt_devmode, "devmode=%o"},
- {Opt_busuid, "busuid=%u"},
- {Opt_busgid, "busgid=%u"},
- {Opt_busmode, "busmode=%o"},
- {Opt_listuid, "listuid=%u"},
- {Opt_listgid, "listgid=%u"},
- {Opt_listmode, "listmode=%o"},
- {Opt_err, NULL}
-};
-
-static int parse_options(struct super_block *s, char *data)
-{
- char *p;
- int option;
-
- /* (re)set to defaults. */
- devuid = 0;
- busuid = 0;
- listuid = 0;
- devgid = 0;
- busgid = 0;
- listgid = 0;
- devmode = USBFS_DEFAULT_DEVMODE;
- busmode = USBFS_DEFAULT_BUSMODE;
- listmode = USBFS_DEFAULT_LISTMODE;
-
- while ((p = strsep(&data, ",")) != NULL) {
- substring_t args[MAX_OPT_ARGS];
- int token;
- if (!*p)
- continue;
-
- token = match_token(p, tokens, args);
- switch (token) {
- case Opt_devuid:
- if (match_int(&args[0], &option))
- return -EINVAL;
- devuid = option;
- break;
- case Opt_devgid:
- if (match_int(&args[0], &option))
- return -EINVAL;
- devgid = option;
- break;
- case Opt_devmode:
- if (match_octal(&args[0], &option))
- return -EINVAL;
- devmode = option & S_IRWXUGO;
- break;
- case Opt_busuid:
- if (match_int(&args[0], &option))
- return -EINVAL;
- busuid = option;
- break;
- case Opt_busgid:
- if (match_int(&args[0], &option))
- return -EINVAL;
- busgid = option;
- break;
- case Opt_busmode:
- if (match_octal(&args[0], &option))
- return -EINVAL;
- busmode = option & S_IRWXUGO;
- break;
- case Opt_listuid:
- if (match_int(&args[0], &option))
- return -EINVAL;
- listuid = option;
- break;
- case Opt_listgid:
- if (match_int(&args[0], &option))
- return -EINVAL;
- listgid = option;
- break;
- case Opt_listmode:
- if (match_octal(&args[0], &option))
- return -EINVAL;
- listmode = option & S_IRWXUGO;
- break;
- default:
- printk(KERN_ERR "usbfs: unrecognised mount option "
- "\"%s\" or missing value\n", p);
- return -EINVAL;
- }
- }
-
- return 0;
-}
-
-static void update_special(struct dentry *special)
-{
- special->d_inode->i_uid = listuid;
- special->d_inode->i_gid = listgid;
- special->d_inode->i_mode = S_IFREG | listmode;
-}
-
-static void update_dev(struct dentry *dev)
-{
- dev->d_inode->i_uid = devuid;
- dev->d_inode->i_gid = devgid;
- dev->d_inode->i_mode = S_IFREG | devmode;
-}
-
-static void update_bus(struct dentry *bus)
-{
- struct dentry *dev = NULL;
-
- bus->d_inode->i_uid = busuid;
- bus->d_inode->i_gid = busgid;
- bus->d_inode->i_mode = S_IFDIR | busmode;
-
- mutex_lock(&bus->d_inode->i_mutex);
-
- list_for_each_entry(dev, &bus->d_subdirs, d_u.d_child)
- if (dev->d_inode)
- update_dev(dev);
-
- mutex_unlock(&bus->d_inode->i_mutex);
-}
-
-static void update_sb(struct super_block *sb)
-{
- struct dentry *root = sb->s_root;
- struct dentry *bus = NULL;
-
- if (!root)
- return;
-
- mutex_lock_nested(&root->d_inode->i_mutex, I_MUTEX_PARENT);
-
- list_for_each_entry(bus, &root->d_subdirs, d_u.d_child) {
- if (bus->d_inode) {
- switch (S_IFMT & bus->d_inode->i_mode) {
- case S_IFDIR:
- update_bus(bus);
- break;
- case S_IFREG:
- update_special(bus);
- break;
- default:
- printk(KERN_WARNING "usbfs: Unknown node %s "
- "mode %x found on remount!\n",
- bus->d_name.name, bus->d_inode->i_mode);
- break;
- }
- }
- }
-
- mutex_unlock(&root->d_inode->i_mutex);
-}
-
-static int remount(struct super_block *sb, int *flags, char *data)
-{
- /* If this is not a real mount,
- * i.e. it's a simple_pin_fs from create_special_files,
- * then ignore it.
- */
- if (*flags & MS_KERNMOUNT)
- return 0;
-
- if (parse_options(sb, data)) {
- printk(KERN_WARNING "usbfs: mount parameter error.\n");
- return -EINVAL;
- }
-
- if (usbfs_mount)
- update_sb(usbfs_mount->mnt_sb);
-
- return 0;
-}
-
-static struct inode *usbfs_get_inode (struct super_block *sb, umode_t mode, dev_t dev)
-{
- struct inode *inode = new_inode(sb);
-
- if (inode) {
- inode->i_ino = get_next_ino();
- inode_init_owner(inode, NULL, mode);
- inode->i_atime = inode->i_mtime = inode->i_ctime = CURRENT_TIME;
- switch (mode & S_IFMT) {
- default:
- init_special_inode(inode, mode, dev);
- break;
- case S_IFREG:
- inode->i_fop = &default_file_operations;
- break;
- case S_IFDIR:
- inode->i_op = &simple_dir_inode_operations;
- inode->i_fop = &simple_dir_operations;
-
- /* directory inodes start off with i_nlink == 2 (for "." entry) */
- inc_nlink(inode);
- break;
- }
- }
- return inode;
-}
-
-/* SMP-safe */
-static int usbfs_mknod (struct inode *dir, struct dentry *dentry, umode_t mode,
- dev_t dev)
-{
- struct inode *inode = usbfs_get_inode(dir->i_sb, mode, dev);
- int error = -EPERM;
-
- if (dentry->d_inode)
- return -EEXIST;
-
- if (inode) {
- d_instantiate(dentry, inode);
- dget(dentry);
- error = 0;
- }
- return error;
-}
-
-static int usbfs_mkdir (struct inode *dir, struct dentry *dentry, umode_t mode)
-{
- int res;
-
- mode = (mode & (S_IRWXUGO | S_ISVTX)) | S_IFDIR;
- res = usbfs_mknod (dir, dentry, mode, 0);
- if (!res)
- inc_nlink(dir);
- return res;
-}
-
-static int usbfs_create (struct inode *dir, struct dentry *dentry, umode_t mode)
-{
- mode = (mode & S_IALLUGO) | S_IFREG;
- return usbfs_mknod (dir, dentry, mode, 0);
-}
-
-static inline int usbfs_positive (struct dentry *dentry)
-{
- return dentry->d_inode && !d_unhashed(dentry);
-}
-
-static int usbfs_empty (struct dentry *dentry)
-{
- struct list_head *list;
-
- spin_lock(&dentry->d_lock);
- list_for_each(list, &dentry->d_subdirs) {
- struct dentry *de = list_entry(list, struct dentry, d_u.d_child);
-
- spin_lock_nested(&de->d_lock, DENTRY_D_LOCK_NESTED);
- if (usbfs_positive(de)) {
- spin_unlock(&de->d_lock);
- spin_unlock(&dentry->d_lock);
- return 0;
- }
- spin_unlock(&de->d_lock);
- }
- spin_unlock(&dentry->d_lock);
- return 1;
-}
-
-static int usbfs_unlink (struct inode *dir, struct dentry *dentry)
-{
- struct inode *inode = dentry->d_inode;
- mutex_lock(&inode->i_mutex);
- drop_nlink(dentry->d_inode);
- dput(dentry);
- mutex_unlock(&inode->i_mutex);
- d_delete(dentry);
- return 0;
-}
-
-static int usbfs_rmdir(struct inode *dir, struct dentry *dentry)
-{
- int error = -ENOTEMPTY;
- struct inode * inode = dentry->d_inode;
-
- mutex_lock(&inode->i_mutex);
- dentry_unhash(dentry);
- if (usbfs_empty(dentry)) {
- dont_mount(dentry);
- drop_nlink(dentry->d_inode);
- drop_nlink(dentry->d_inode);
- dput(dentry);
- inode->i_flags |= S_DEAD;
- drop_nlink(dir);
- error = 0;
- }
- mutex_unlock(&inode->i_mutex);
- if (!error)
- d_delete(dentry);
- return error;
-}
-
-
-/* default file operations */
-static ssize_t default_read_file (struct file *file, char __user *buf,
- size_t count, loff_t *ppos)
-{
- return 0;
-}
-
-static ssize_t default_write_file (struct file *file, const char __user *buf,
- size_t count, loff_t *ppos)
-{
- return count;
-}
-
-static loff_t default_file_lseek (struct file *file, loff_t offset, int orig)
-{
- loff_t retval = -EINVAL;
-
- mutex_lock(&file->f_path.dentry->d_inode->i_mutex);
- switch(orig) {
- case 0:
- if (offset > 0) {
- file->f_pos = offset;
- retval = file->f_pos;
- }
- break;
- case 1:
- if ((offset + file->f_pos) > 0) {
- file->f_pos += offset;
- retval = file->f_pos;
- }
- break;
- default:
- break;
- }
- mutex_unlock(&file->f_path.dentry->d_inode->i_mutex);
- return retval;
-}
-
-static const struct file_operations default_file_operations = {
- .read = default_read_file,
- .write = default_write_file,
- .open = simple_open,
- .llseek = default_file_lseek,
-};
-
-static const struct super_operations usbfs_ops = {
- .statfs = simple_statfs,
- .drop_inode = generic_delete_inode,
- .remount_fs = remount,
- .show_options = usbfs_show_options,
-};
-
-static int usbfs_fill_super(struct super_block *sb, void *data, int silent)
-{
- struct inode *inode;
-
- sb->s_blocksize = PAGE_CACHE_SIZE;
- sb->s_blocksize_bits = PAGE_CACHE_SHIFT;
- sb->s_magic = USBDEVICE_SUPER_MAGIC;
- sb->s_op = &usbfs_ops;
- sb->s_time_gran = 1;
- inode = usbfs_get_inode(sb, S_IFDIR | 0755, 0);
- sb->s_root = d_make_root(inode);
- if (!sb->s_root) {
- dbg("%s: could not get root dentry!",__func__);
- return -ENOMEM;
- }
- return 0;
-}
-
-/*
- * fs_create_by_name - create a file, given a name
- * @name: name of file
- * @mode: type of file
- * @parent: dentry of directory to create it in
- * @dentry: resulting dentry of file
- *
- * This function handles both regular files and directories.
- */
-static int fs_create_by_name (const char *name, umode_t mode,
- struct dentry *parent, struct dentry **dentry)
-{
- int error = 0;
-
- /* If the parent is not specified, we create it in the root.
- * We need the root dentry to do this, which is in the super
- * block. A pointer to that is in the struct vfsmount that we
- * have around.
- */
- if (!parent ) {
- if (usbfs_mount)
- parent = usbfs_mount->mnt_root;
- }
-
- if (!parent) {
- dbg("Ah! can not find a parent!");
- return -EFAULT;
- }
-
- *dentry = NULL;
- mutex_lock(&parent->d_inode->i_mutex);
- *dentry = lookup_one_len(name, parent, strlen(name));
- if (!IS_ERR(*dentry)) {
- if (S_ISDIR(mode))
- error = usbfs_mkdir (parent->d_inode, *dentry, mode);
- else
- error = usbfs_create (parent->d_inode, *dentry, mode);
- } else
- error = PTR_ERR(*dentry);
- mutex_unlock(&parent->d_inode->i_mutex);
-
- return error;
-}
-
-static struct dentry *fs_create_file (const char *name, umode_t mode,
- struct dentry *parent, void *data,
- const struct file_operations *fops,
- uid_t uid, gid_t gid)
-{
- struct dentry *dentry;
- int error;
-
- dbg("creating file '%s'",name);
-
- error = fs_create_by_name (name, mode, parent, &dentry);
- if (error) {
- dentry = NULL;
- } else {
- if (dentry->d_inode) {
- if (data)
- dentry->d_inode->i_private = data;
- if (fops)
- dentry->d_inode->i_fop = fops;
- dentry->d_inode->i_uid = uid;
- dentry->d_inode->i_gid = gid;
- }
- }
-
- return dentry;
-}
-
-static void fs_remove_file (struct dentry *dentry)
-{
- struct dentry *parent = dentry->d_parent;
-
- if (!parent || !parent->d_inode)
- return;
-
- mutex_lock_nested(&parent->d_inode->i_mutex, I_MUTEX_PARENT);
- if (usbfs_positive(dentry)) {
- if (dentry->d_inode) {
- if (S_ISDIR(dentry->d_inode->i_mode))
- usbfs_rmdir(parent->d_inode, dentry);
- else
- usbfs_unlink(parent->d_inode, dentry);
- dput(dentry);
- }
- }
- mutex_unlock(&parent->d_inode->i_mutex);
-}
-
-/* --------------------------------------------------------------------- */
-
-static struct dentry *usb_mount(struct file_system_type *fs_type,
- int flags, const char *dev_name, void *data)
-{
- return mount_single(fs_type, flags, data, usbfs_fill_super);
-}
-
-static struct file_system_type usb_fs_type = {
- .owner = THIS_MODULE,
- .name = "usbfs",
- .mount = usb_mount,
- .kill_sb = kill_litter_super,
-};
-
-/* --------------------------------------------------------------------- */
-
-static int create_special_files (void)
-{
- struct dentry *parent;
- int retval;
-
- /* create the devices special file */
- retval = simple_pin_fs(&usb_fs_type, &usbfs_mount, &usbfs_mount_count);
- if (retval) {
- printk(KERN_ERR "Unable to get usbfs mount\n");
- goto exit;
- }
-
- parent = usbfs_mount->mnt_root;
- devices_usbfs_dentry = fs_create_file ("devices",
- listmode | S_IFREG, parent,
- NULL, &usbfs_devices_fops,
- listuid, listgid);
- if (devices_usbfs_dentry == NULL) {
- printk(KERN_ERR "Unable to create devices usbfs file\n");
- retval = -ENODEV;
- goto error_clean_mounts;
- }
-
- goto exit;
-
-error_clean_mounts:
- simple_release_fs(&usbfs_mount, &usbfs_mount_count);
-exit:
- return retval;
-}
-
-static void remove_special_files (void)
-{
- if (devices_usbfs_dentry)
- fs_remove_file (devices_usbfs_dentry);
- devices_usbfs_dentry = NULL;
- simple_release_fs(&usbfs_mount, &usbfs_mount_count);
-}
-
-void usbfs_update_special (void)
-{
- struct inode *inode;
-
- if (devices_usbfs_dentry) {
- inode = devices_usbfs_dentry->d_inode;
- if (inode)
- inode->i_atime = inode->i_mtime = inode->i_ctime = CURRENT_TIME;
- }
-}
-
-static void usbfs_add_bus(struct usb_bus *bus)
-{
- struct dentry *parent;
- char name[8];
- int retval;
-
- /* create the special files if this is the first bus added */
- if (num_buses == 0) {
- retval = create_special_files();
- if (retval)
- return;
- }
- ++num_buses;
-
- sprintf (name, "%03d", bus->busnum);
-
- parent = usbfs_mount->mnt_root;
- bus->usbfs_dentry = fs_create_file (name, busmode | S_IFDIR, parent,
- bus, NULL, busuid, busgid);
- if (bus->usbfs_dentry == NULL) {
- printk(KERN_ERR "Error creating usbfs bus entry\n");
- return;
- }
-}
-
-static void usbfs_remove_bus(struct usb_bus *bus)
-{
- if (bus->usbfs_dentry) {
- fs_remove_file (bus->usbfs_dentry);
- bus->usbfs_dentry = NULL;
- }
-
- --num_buses;
- if (num_buses <= 0) {
- remove_special_files();
- num_buses = 0;
- }
-}
-
-static void usbfs_add_device(struct usb_device *dev)
-{
- char name[8];
- int i;
- int i_size;
-
- sprintf (name, "%03d", dev->devnum);
- dev->usbfs_dentry = fs_create_file (name, devmode | S_IFREG,
- dev->bus->usbfs_dentry, dev,
- &usbdev_file_operations,
- devuid, devgid);
- if (dev->usbfs_dentry == NULL) {
- printk(KERN_ERR "Error creating usbfs device entry\n");
- return;
- }
-
- /* Set the size of the device's file to be
- * equal to the size of the device descriptors. */
- i_size = sizeof (struct usb_device_descriptor);
- for (i = 0; i < dev->descriptor.bNumConfigurations; ++i) {
- struct usb_config_descriptor *config =
- (struct usb_config_descriptor *)dev->rawdescriptors[i];
- i_size += le16_to_cpu(config->wTotalLength);
- }
- if (dev->usbfs_dentry->d_inode)
- dev->usbfs_dentry->d_inode->i_size = i_size;
-}
-
-static void usbfs_remove_device(struct usb_device *dev)
-{
- if (dev->usbfs_dentry) {
- fs_remove_file (dev->usbfs_dentry);
- dev->usbfs_dentry = NULL;
- }
-}
-
-static int usbfs_notify(struct notifier_block *self, unsigned long action, void *dev)
-{
- switch (action) {
- case USB_DEVICE_ADD:
- usbfs_add_device(dev);
- break;
- case USB_DEVICE_REMOVE:
- usbfs_remove_device(dev);
- break;
- case USB_BUS_ADD:
- usbfs_add_bus(dev);
- break;
- case USB_BUS_REMOVE:
- usbfs_remove_bus(dev);
- }
-
- usbfs_update_special();
- usbfs_conn_disc_event();
- return NOTIFY_OK;
-}
-
-static struct notifier_block usbfs_nb = {
- .notifier_call = usbfs_notify,
-};
-
-/* --------------------------------------------------------------------- */
-
-static struct proc_dir_entry *usbdir = NULL;
-
-int __init usbfs_init(void)
-{
- int retval;
-
- retval = register_filesystem(&usb_fs_type);
- if (retval)
- return retval;
-
- usb_register_notify(&usbfs_nb);
-
- /* create mount point for usbfs */
- usbdir = proc_mkdir("bus/usb", NULL);
-
- return 0;
-}
-
-void usbfs_cleanup(void)
-{
- usb_unregister_notify(&usbfs_nb);
- unregister_filesystem(&usb_fs_type);
- if (usbdir)
- remove_proc_entry("bus/usb", NULL);
-}
-
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index ca717da3be9..b548cf1dbc6 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -1308,10 +1308,19 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate)
* Remove the current alt setting and add the new alt setting.
*/
mutex_lock(hcd->bandwidth_mutex);
+ /* Disable LPM, and re-enable it once the new alt setting is installed,
+ * so that the xHCI driver can recalculate the U1/U2 timeouts.
+ */
+ if (usb_disable_lpm(dev)) {
+ dev_err(&iface->dev, "%s Failed to disable LPM\n.", __func__);
+ mutex_unlock(hcd->bandwidth_mutex);
+ return -ENOMEM;
+ }
ret = usb_hcd_alloc_bandwidth(dev, NULL, iface->cur_altsetting, alt);
if (ret < 0) {
dev_info(&dev->dev, "Not enough bandwidth for altsetting %d\n",
alternate);
+ usb_enable_lpm(dev);
mutex_unlock(hcd->bandwidth_mutex);
return ret;
}
@@ -1334,6 +1343,7 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate)
} else if (ret < 0) {
/* Re-instate the old alt setting */
usb_hcd_alloc_bandwidth(dev, NULL, alt, iface->cur_altsetting);
+ usb_enable_lpm(dev);
mutex_unlock(hcd->bandwidth_mutex);
return ret;
}
@@ -1354,6 +1364,9 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate)
iface->cur_altsetting = alt;
+ /* Now that the interface is installed, re-enable LPM. */
+ usb_unlocked_enable_lpm(dev);
+
/* If the interface only has one altsetting and the device didn't
* accept the request, we attempt to carry out the equivalent action
* by manually clearing the HALT feature for each endpoint in the
@@ -1437,6 +1450,14 @@ int usb_reset_configuration(struct usb_device *dev)
config = dev->actconfig;
retval = 0;
mutex_lock(hcd->bandwidth_mutex);
+ /* Disable LPM, and re-enable it once the configuration is reset, so
+ * that the xHCI driver can recalculate the U1/U2 timeouts.
+ */
+ if (usb_disable_lpm(dev)) {
+ dev_err(&dev->dev, "%s Failed to disable LPM\n.", __func__);
+ mutex_unlock(hcd->bandwidth_mutex);
+ return -ENOMEM;
+ }
/* Make sure we have enough bandwidth for each alternate setting 0 */
for (i = 0; i < config->desc.bNumInterfaces; i++) {
struct usb_interface *intf = config->interface[i];
@@ -1465,6 +1486,7 @@ reset_old_alts:
usb_hcd_alloc_bandwidth(dev, NULL,
alt, intf->cur_altsetting);
}
+ usb_enable_lpm(dev);
mutex_unlock(hcd->bandwidth_mutex);
return retval;
}
@@ -1502,6 +1524,8 @@ reset_old_alts:
create_intf_ep_devs(intf);
}
}
+ /* Now that the interfaces are installed, re-enable LPM. */
+ usb_unlocked_enable_lpm(dev);
return 0;
}
EXPORT_SYMBOL_GPL(usb_reset_configuration);
@@ -1763,8 +1787,18 @@ free_interfaces:
* this call fails, the device state is unchanged.
*/
mutex_lock(hcd->bandwidth_mutex);
+ /* Disable LPM, and re-enable it once the new configuration is
+ * installed, so that the xHCI driver can recalculate the U1/U2
+ * timeouts.
+ */
+ if (usb_disable_lpm(dev)) {
+ dev_err(&dev->dev, "%s Failed to disable LPM\n.", __func__);
+ mutex_unlock(hcd->bandwidth_mutex);
+ return -ENOMEM;
+ }
ret = usb_hcd_alloc_bandwidth(dev, cp, NULL, NULL);
if (ret < 0) {
+ usb_enable_lpm(dev);
mutex_unlock(hcd->bandwidth_mutex);
usb_autosuspend_device(dev);
goto free_interfaces;
@@ -1784,6 +1818,7 @@ free_interfaces:
if (!cp) {
usb_set_device_state(dev, USB_STATE_ADDRESS);
usb_hcd_alloc_bandwidth(dev, NULL, NULL, NULL);
+ usb_enable_lpm(dev);
mutex_unlock(hcd->bandwidth_mutex);
usb_autosuspend_device(dev);
goto free_interfaces;
@@ -1838,6 +1873,9 @@ free_interfaces:
!(dev->quirks & USB_QUIRK_CONFIG_INTF_STRINGS))
cp->string = usb_cache_string(dev, cp->desc.iConfiguration);
+ /* Now that the interfaces are installed, re-enable LPM. */
+ usb_unlocked_enable_lpm(dev);
+
/* Now that all the interfaces are set up, register them
* to trigger binding of drivers to interfaces. probe()
* routines may install different altsettings and may
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index 4c65eb6a867..32d3adc315f 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -123,6 +123,9 @@ static const struct usb_device_id usb_quirk_list[] = {
/* Guillemot Webcam Hercules Dualpix Exchange*/
{ USB_DEVICE(0x06f8, 0x3005), .driver_info = USB_QUIRK_RESET_RESUME },
+ /* Midiman M-Audio Keystation 88es */
+ { USB_DEVICE(0x0763, 0x0192), .driver_info = USB_QUIRK_RESET_RESUME },
+
/* M-Systems Flash Disk Pioneers */
{ USB_DEVICE(0x08ec, 0x1000), .driver_info = USB_QUIRK_RESET_RESUME },
diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c
index 566d9f94f73..9a56e3adf47 100644
--- a/drivers/usb/core/sysfs.c
+++ b/drivers/usb/core/sysfs.c
@@ -73,7 +73,7 @@ set_bConfigurationValue(struct device *dev, struct device_attribute *attr,
return (value < 0) ? value : count;
}
-static DEVICE_ATTR(bConfigurationValue, S_IRUGO | S_IWUSR,
+static DEVICE_ATTR_IGNORE_LOCKDEP(bConfigurationValue, S_IRUGO | S_IWUSR,
show_bConfigurationValue, set_bConfigurationValue);
/* String fields */
@@ -595,7 +595,7 @@ static ssize_t usb_dev_authorized_store(struct device *dev,
return result < 0? result : size;
}
-static DEVICE_ATTR(authorized, 0644,
+static DEVICE_ATTR_IGNORE_LOCKDEP(authorized, 0644,
usb_dev_authorized_show, usb_dev_authorized_store);
/* "Safely remove a device" */
@@ -618,7 +618,7 @@ static ssize_t usb_remove_store(struct device *dev,
usb_unlock_device(udev);
return rc;
}
-static DEVICE_ATTR(remove, 0200, NULL, usb_remove_store);
+static DEVICE_ATTR_IGNORE_LOCKDEP(remove, 0200, NULL, usb_remove_store);
static struct attribute *dev_attrs[] = {
diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c
index cd9b3a2cd8a..9d912bfdcff 100644
--- a/drivers/usb/core/urb.c
+++ b/drivers/usb/core/urb.c
@@ -681,6 +681,27 @@ void usb_unpoison_urb(struct urb *urb)
EXPORT_SYMBOL_GPL(usb_unpoison_urb);
/**
+ * usb_block_urb - reliably prevent further use of an URB
+ * @urb: pointer to URB to be blocked, may be NULL
+ *
+ * After the routine has run, attempts to resubmit the URB will fail
+ * with error -EPERM. Thus even if the URB's completion handler always
+ * tries to resubmit, it will not succeed and the URB will become idle.
+ *
+ * The URB must not be deallocated while this routine is running. In
+ * particular, when a driver calls this routine, it must insure that the
+ * completion handler cannot deallocate the URB.
+ */
+void usb_block_urb(struct urb *urb)
+{
+ if (!urb)
+ return;
+
+ atomic_inc(&urb->reject);
+}
+EXPORT_SYMBOL_GPL(usb_block_urb);
+
+/**
* usb_kill_anchored_urbs - cancel transfer requests en masse
* @anchor: anchor the requests are bound to
*
diff --git a/drivers/usb/core/usb-acpi.c b/drivers/usb/core/usb-acpi.c
new file mode 100644
index 00000000000..8947b203d5a
--- /dev/null
+++ b/drivers/usb/core/usb-acpi.c
@@ -0,0 +1,117 @@
+/*
+ * USB-ACPI glue code
+ *
+ * Copyright 2012 Red Hat <mjg@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation, version 2.
+ *
+ */
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/acpi.h>
+#include <linux/pci.h>
+#include <acpi/acpi_bus.h>
+
+#include "usb.h"
+
+static int usb_acpi_check_upc(struct usb_device *udev, acpi_handle handle)
+{
+ acpi_status status;
+ struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+ union acpi_object *upc;
+ int ret = 0;
+
+ status = acpi_evaluate_object(handle, "_UPC", NULL, &buffer);
+
+ if (ACPI_FAILURE(status))
+ return -ENODEV;
+
+ upc = buffer.pointer;
+
+ if (!upc || (upc->type != ACPI_TYPE_PACKAGE)
+ || upc->package.count != 4) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ if (upc->package.elements[0].integer.value)
+ udev->removable = USB_DEVICE_REMOVABLE;
+ else
+ udev->removable = USB_DEVICE_FIXED;
+
+out:
+ kfree(upc);
+ return ret;
+}
+
+static int usb_acpi_check_pld(struct usb_device *udev, acpi_handle handle)
+{
+ acpi_status status;
+ struct acpi_pld pld;
+
+ status = acpi_get_physical_device_location(handle, &pld);
+
+ if (ACPI_FAILURE(status))
+ return -ENODEV;
+
+ if (pld.user_visible)
+ udev->removable = USB_DEVICE_REMOVABLE;
+ else
+ udev->removable = USB_DEVICE_FIXED;
+
+ return 0;
+}
+
+static int usb_acpi_find_device(struct device *dev, acpi_handle *handle)
+{
+ struct usb_device *udev;
+ struct device *parent;
+ acpi_handle *parent_handle;
+
+ if (!is_usb_device(dev))
+ return -ENODEV;
+
+ udev = to_usb_device(dev);
+ parent = dev->parent;
+ parent_handle = DEVICE_ACPI_HANDLE(parent);
+
+ if (!parent_handle)
+ return -ENODEV;
+
+ *handle = acpi_get_child(parent_handle, udev->portnum);
+
+ if (!*handle)
+ return -ENODEV;
+
+ /*
+ * PLD will tell us whether a port is removable to the user or
+ * not. If we don't get an answer from PLD (it's not present
+ * or it's malformed) then try to infer it from UPC. If a
+ * device isn't connectable then it's probably not removable.
+ */
+ if (usb_acpi_check_pld(udev, *handle) != 0)
+ usb_acpi_check_upc(udev, *handle);
+
+ return 0;
+}
+
+static struct acpi_bus_type usb_acpi_bus = {
+ .bus = &usb_bus_type,
+ .find_bridge = NULL,
+ .find_device = usb_acpi_find_device,
+};
+
+int usb_acpi_register(void)
+{
+ return register_acpi_bus_type(&usb_acpi_bus);
+}
+
+void usb_acpi_unregister(void)
+{
+ unregister_acpi_bus_type(&usb_acpi_bus);
+}
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index c74ba7bbc74..25d0c61c3f8 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -1015,6 +1015,7 @@ static int __init usb_init(void)
if (retval)
goto out;
+ usb_acpi_register();
retval = bus_register(&usb_bus_type);
if (retval)
goto bus_register_failed;
@@ -1030,9 +1031,6 @@ static int __init usb_init(void)
retval = usb_devio_init();
if (retval)
goto usb_devio_init_failed;
- retval = usbfs_init();
- if (retval)
- goto fs_init_failed;
retval = usb_hub_init();
if (retval)
goto hub_init_failed;
@@ -1042,8 +1040,6 @@ static int __init usb_init(void)
usb_hub_cleanup();
hub_init_failed:
- usbfs_cleanup();
-fs_init_failed:
usb_devio_cleanup();
usb_devio_init_failed:
usb_deregister(&usbfs_driver);
@@ -1054,6 +1050,7 @@ major_init_failed:
bus_notifier_failed:
bus_unregister(&usb_bus_type);
bus_register_failed:
+ usb_acpi_unregister();
usb_debugfs_cleanup();
out:
return retval;
@@ -1070,12 +1067,12 @@ static void __exit usb_exit(void)
usb_deregister_device_driver(&usb_generic_driver);
usb_major_cleanup();
- usbfs_cleanup();
usb_deregister(&usbfs_driver);
usb_devio_cleanup();
usb_hub_cleanup();
bus_unregister_notifier(&usb_bus_type, &usb_bus_nb);
bus_unregister(&usb_bus_type);
+ usb_acpi_unregister();
usb_debugfs_cleanup();
}
diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h
index 71648dcbe43..5c5c538ea73 100644
--- a/drivers/usb/core/usb.h
+++ b/drivers/usb/core/usb.h
@@ -156,3 +156,10 @@ extern void usb_notify_remove_device(struct usb_device *udev);
extern void usb_notify_add_bus(struct usb_bus *ubus);
extern void usb_notify_remove_bus(struct usb_bus *ubus);
+#ifdef CONFIG_ACPI
+extern int usb_acpi_register(void);
+extern void usb_acpi_unregister(void);
+#else
+static inline int usb_acpi_register(void) { return 0; };
+static inline void usb_acpi_unregister(void) { };
+#endif
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-02-21 12:48:24 +0000