summaryrefslogtreecommitdiffstats
path: root/drivers/usb/dwc3/ep0.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/dwc3/ep0.c')
-rw-r--r--drivers/usb/dwc3/ep0.c157
1 files changed, 145 insertions, 12 deletions
diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
index 3584a169886..9e8a3dce69f 100644
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -179,7 +179,7 @@ int dwc3_gadget_ep0_queue(struct usb_ep *ep, struct usb_request *request,
int ret;
spin_lock_irqsave(&dwc->lock, flags);
- if (!dep->desc) {
+ if (!dep->endpoint.desc) {
dev_dbg(dwc->dev, "trying to queue request %p to disabled %s\n",
request, dep->name);
ret = -ESHUTDOWN;
@@ -261,6 +261,7 @@ static int dwc3_ep0_handle_status(struct dwc3 *dwc,
{
struct dwc3_ep *dep;
u32 recip;
+ u32 reg;
u16 usb_status = 0;
__le16 *response_pkt;
@@ -268,10 +269,18 @@ static int dwc3_ep0_handle_status(struct dwc3 *dwc,
switch (recip) {
case USB_RECIP_DEVICE:
/*
- * We are self-powered. U1/U2/LTM will be set later
- * once we handle this states. RemoteWakeup is 0 on SS
+ * LTM will be set once we know how to set this in HW.
*/
usb_status |= dwc->is_selfpowered << USB_DEVICE_SELF_POWERED;
+
+ if (dwc->speed == DWC3_DSTS_SUPERSPEED) {
+ reg = dwc3_readl(dwc->regs, DWC3_DCTL);
+ if (reg & DWC3_DCTL_INITU1ENA)
+ usb_status |= 1 << USB_DEV_STAT_U1_ENABLED;
+ if (reg & DWC3_DCTL_INITU2ENA)
+ usb_status |= 1 << USB_DEV_STAT_U2_ENABLED;
+ }
+
break;
case USB_RECIP_INTERFACE:
@@ -312,6 +321,7 @@ static int dwc3_ep0_handle_feature(struct dwc3 *dwc,
u32 recip;
u32 wValue;
u32 wIndex;
+ u32 reg;
int ret;
wValue = le16_to_cpu(ctrl->wValue);
@@ -320,29 +330,43 @@ static int dwc3_ep0_handle_feature(struct dwc3 *dwc,
switch (recip) {
case USB_RECIP_DEVICE:
+ switch (wValue) {
+ case USB_DEVICE_REMOTE_WAKEUP:
+ break;
/*
* 9.4.1 says only only for SS, in AddressState only for
* default control pipe
*/
- switch (wValue) {
case USB_DEVICE_U1_ENABLE:
- case USB_DEVICE_U2_ENABLE:
- case USB_DEVICE_LTM_ENABLE:
if (dwc->dev_state != DWC3_CONFIGURED_STATE)
return -EINVAL;
if (dwc->speed != DWC3_DSTS_SUPERSPEED)
return -EINVAL;
- }
- /* XXX add U[12] & LTM */
- switch (wValue) {
- case USB_DEVICE_REMOTE_WAKEUP:
- break;
- case USB_DEVICE_U1_ENABLE:
+ reg = dwc3_readl(dwc->regs, DWC3_DCTL);
+ if (set)
+ reg |= DWC3_DCTL_INITU1ENA;
+ else
+ reg &= ~DWC3_DCTL_INITU1ENA;
+ dwc3_writel(dwc->regs, DWC3_DCTL, reg);
break;
+
case USB_DEVICE_U2_ENABLE:
+ if (dwc->dev_state != DWC3_CONFIGURED_STATE)
+ return -EINVAL;
+ if (dwc->speed != DWC3_DSTS_SUPERSPEED)
+ return -EINVAL;
+
+ reg = dwc3_readl(dwc->regs, DWC3_DCTL);
+ if (set)
+ reg |= DWC3_DCTL_INITU2ENA;
+ else
+ reg &= ~DWC3_DCTL_INITU2ENA;
+ dwc3_writel(dwc->regs, DWC3_DCTL, reg);
break;
+
case USB_DEVICE_LTM_ENABLE:
+ return -EINVAL;
break;
case USB_DEVICE_TEST_MODE:
@@ -469,6 +493,107 @@ static int dwc3_ep0_set_config(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
return ret;
}
+static void dwc3_ep0_set_sel_cmpl(struct usb_ep *ep, struct usb_request *req)
+{
+ struct dwc3_ep *dep = to_dwc3_ep(ep);
+ struct dwc3 *dwc = dep->dwc;
+
+ u32 param = 0;
+ u32 reg;
+
+ struct timing {
+ u8 u1sel;
+ u8 u1pel;
+ u16 u2sel;
+ u16 u2pel;
+ } __packed timing;
+
+ int ret;
+
+ memcpy(&timing, req->buf, sizeof(timing));
+
+ dwc->u1sel = timing.u1sel;
+ dwc->u1pel = timing.u1pel;
+ dwc->u2sel = timing.u2sel;
+ dwc->u2pel = timing.u2pel;
+
+ reg = dwc3_readl(dwc->regs, DWC3_DCTL);
+ if (reg & DWC3_DCTL_INITU2ENA)
+ param = dwc->u2pel;
+ if (reg & DWC3_DCTL_INITU1ENA)
+ param = dwc->u1pel;
+
+ /*
+ * According to Synopsys Databook, if parameter is
+ * greater than 125, a value of zero should be
+ * programmed in the register.
+ */
+ if (param > 125)
+ param = 0;
+
+ /* now that we have the time, issue DGCMD Set Sel */
+ ret = dwc3_send_gadget_generic_command(dwc,
+ DWC3_DGCMD_SET_PERIODIC_PAR, param);
+ WARN_ON(ret < 0);
+}
+
+static int dwc3_ep0_set_sel(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
+{
+ struct dwc3_ep *dep;
+ u16 wLength;
+ u16 wValue;
+
+ if (dwc->dev_state == DWC3_DEFAULT_STATE)
+ return -EINVAL;
+
+ wValue = le16_to_cpu(ctrl->wValue);
+ wLength = le16_to_cpu(ctrl->wLength);
+
+ if (wLength != 6) {
+ dev_err(dwc->dev, "Set SEL should be 6 bytes, got %d\n",
+ wLength);
+ return -EINVAL;
+ }
+
+ /*
+ * To handle Set SEL we need to receive 6 bytes from Host. So let's
+ * queue a usb_request for 6 bytes.
+ *
+ * Remember, though, this controller can't handle non-wMaxPacketSize
+ * aligned transfers on the OUT direction, so we queue a request for
+ * wMaxPacketSize instead.
+ */
+ dep = dwc->eps[0];
+ dwc->ep0_usb_req.dep = dep;
+ dwc->ep0_usb_req.request.length = dep->endpoint.maxpacket;
+ dwc->ep0_usb_req.request.buf = dwc->setup_buf;
+ dwc->ep0_usb_req.request.complete = dwc3_ep0_set_sel_cmpl;
+
+ return __dwc3_gadget_ep0_queue(dep, &dwc->ep0_usb_req);
+}
+
+static int dwc3_ep0_set_isoch_delay(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
+{
+ u16 wLength;
+ u16 wValue;
+ u16 wIndex;
+
+ wValue = le16_to_cpu(ctrl->wValue);
+ wLength = le16_to_cpu(ctrl->wLength);
+ wIndex = le16_to_cpu(ctrl->wIndex);
+
+ if (wIndex || wLength)
+ return -EINVAL;
+
+ /*
+ * REVISIT It's unclear from Databook what to do with this
+ * value. For now, just cache it.
+ */
+ dwc->isoch_delay = wValue;
+
+ return 0;
+}
+
static int dwc3_ep0_std_request(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
{
int ret;
@@ -494,6 +619,14 @@ static int dwc3_ep0_std_request(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
dev_vdbg(dwc->dev, "USB_REQ_SET_CONFIGURATION\n");
ret = dwc3_ep0_set_config(dwc, ctrl);
break;
+ case USB_REQ_SET_SEL:
+ dev_vdbg(dwc->dev, "USB_REQ_SET_SEL\n");
+ ret = dwc3_ep0_set_sel(dwc, ctrl);
+ break;
+ case USB_REQ_SET_ISOCH_DELAY:
+ dev_vdbg(dwc->dev, "USB_REQ_SET_ISOCH_DELAY\n");
+ ret = dwc3_ep0_set_isoch_delay(dwc, ctrl);
+ break;
default:
dev_vdbg(dwc->dev, "Forwarding to gadget driver\n");
ret = dwc3_ep0_delegate_req(dwc, ctrl);