diff options
Diffstat (limited to 'drivers/usb/dwc3/ep0.c')
| -rw-r--r-- | drivers/usb/dwc3/ep0.c | 157 |
1 files changed, 145 insertions, 12 deletions
diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c index 3584a169886..9e8a3dce69f 100644 --- a/drivers/usb/dwc3/ep0.c +++ b/drivers/usb/dwc3/ep0.c @@ -179,7 +179,7 @@ int dwc3_gadget_ep0_queue(struct usb_ep *ep, struct usb_request *request, int ret; spin_lock_irqsave(&dwc->lock, flags); - if (!dep->desc) { + if (!dep->endpoint.desc) { dev_dbg(dwc->dev, "trying to queue request %p to disabled %s\n", request, dep->name); ret = -ESHUTDOWN; @@ -261,6 +261,7 @@ static int dwc3_ep0_handle_status(struct dwc3 *dwc, { struct dwc3_ep *dep; u32 recip; + u32 reg; u16 usb_status = 0; __le16 *response_pkt; @@ -268,10 +269,18 @@ static int dwc3_ep0_handle_status(struct dwc3 *dwc, switch (recip) { case USB_RECIP_DEVICE: /* - * We are self-powered. U1/U2/LTM will be set later - * once we handle this states. RemoteWakeup is 0 on SS + * LTM will be set once we know how to set this in HW. */ usb_status |= dwc->is_selfpowered << USB_DEVICE_SELF_POWERED; + + if (dwc->speed == DWC3_DSTS_SUPERSPEED) { + reg = dwc3_readl(dwc->regs, DWC3_DCTL); + if (reg & DWC3_DCTL_INITU1ENA) + usb_status |= 1 << USB_DEV_STAT_U1_ENABLED; + if (reg & DWC3_DCTL_INITU2ENA) + usb_status |= 1 << USB_DEV_STAT_U2_ENABLED; + } + break; case USB_RECIP_INTERFACE: @@ -312,6 +321,7 @@ static int dwc3_ep0_handle_feature(struct dwc3 *dwc, u32 recip; u32 wValue; u32 wIndex; + u32 reg; int ret; wValue = le16_to_cpu(ctrl->wValue); @@ -320,29 +330,43 @@ static int dwc3_ep0_handle_feature(struct dwc3 *dwc, switch (recip) { case USB_RECIP_DEVICE: + switch (wValue) { + case USB_DEVICE_REMOTE_WAKEUP: + break; /* * 9.4.1 says only only for SS, in AddressState only for * default control pipe */ - switch (wValue) { case USB_DEVICE_U1_ENABLE: - case USB_DEVICE_U2_ENABLE: - case USB_DEVICE_LTM_ENABLE: if (dwc->dev_state != DWC3_CONFIGURED_STATE) return -EINVAL; if (dwc->speed != DWC3_DSTS_SUPERSPEED) return -EINVAL; - } - /* XXX add U[12] & LTM */ - switch (wValue) { - case USB_DEVICE_REMOTE_WAKEUP: - break; - case USB_DEVICE_U1_ENABLE: + reg = dwc3_readl(dwc->regs, DWC3_DCTL); + if (set) + reg |= DWC3_DCTL_INITU1ENA; + else + reg &= ~DWC3_DCTL_INITU1ENA; + dwc3_writel(dwc->regs, DWC3_DCTL, reg); break; + case USB_DEVICE_U2_ENABLE: + if (dwc->dev_state != DWC3_CONFIGURED_STATE) + return -EINVAL; + if (dwc->speed != DWC3_DSTS_SUPERSPEED) + return -EINVAL; + + reg = dwc3_readl(dwc->regs, DWC3_DCTL); + if (set) + reg |= DWC3_DCTL_INITU2ENA; + else + reg &= ~DWC3_DCTL_INITU2ENA; + dwc3_writel(dwc->regs, DWC3_DCTL, reg); break; + case USB_DEVICE_LTM_ENABLE: + return -EINVAL; break; case USB_DEVICE_TEST_MODE: @@ -469,6 +493,107 @@ static int dwc3_ep0_set_config(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl) return ret; } +static void dwc3_ep0_set_sel_cmpl(struct usb_ep *ep, struct usb_request *req) +{ + struct dwc3_ep *dep = to_dwc3_ep(ep); + struct dwc3 *dwc = dep->dwc; + + u32 param = 0; + u32 reg; + + struct timing { + u8 u1sel; + u8 u1pel; + u16 u2sel; + u16 u2pel; + } __packed timing; + + int ret; + + memcpy(&timing, req->buf, sizeof(timing)); + + dwc->u1sel = timing.u1sel; + dwc->u1pel = timing.u1pel; + dwc->u2sel = timing.u2sel; + dwc->u2pel = timing.u2pel; + + reg = dwc3_readl(dwc->regs, DWC3_DCTL); + if (reg & DWC3_DCTL_INITU2ENA) + param = dwc->u2pel; + if (reg & DWC3_DCTL_INITU1ENA) + param = dwc->u1pel; + + /* + * According to Synopsys Databook, if parameter is + * greater than 125, a value of zero should be + * programmed in the register. + */ + if (param > 125) + param = 0; + + /* now that we have the time, issue DGCMD Set Sel */ + ret = dwc3_send_gadget_generic_command(dwc, + DWC3_DGCMD_SET_PERIODIC_PAR, param); + WARN_ON(ret < 0); +} + +static int dwc3_ep0_set_sel(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl) +{ + struct dwc3_ep *dep; + u16 wLength; + u16 wValue; + + if (dwc->dev_state == DWC3_DEFAULT_STATE) + return -EINVAL; + + wValue = le16_to_cpu(ctrl->wValue); + wLength = le16_to_cpu(ctrl->wLength); + + if (wLength != 6) { + dev_err(dwc->dev, "Set SEL should be 6 bytes, got %d\n", + wLength); + return -EINVAL; + } + + /* + * To handle Set SEL we need to receive 6 bytes from Host. So let's + * queue a usb_request for 6 bytes. + * + * Remember, though, this controller can't handle non-wMaxPacketSize + * aligned transfers on the OUT direction, so we queue a request for + * wMaxPacketSize instead. + */ + dep = dwc->eps[0]; + dwc->ep0_usb_req.dep = dep; + dwc->ep0_usb_req.request.length = dep->endpoint.maxpacket; + dwc->ep0_usb_req.request.buf = dwc->setup_buf; + dwc->ep0_usb_req.request.complete = dwc3_ep0_set_sel_cmpl; + + return __dwc3_gadget_ep0_queue(dep, &dwc->ep0_usb_req); +} + +static int dwc3_ep0_set_isoch_delay(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl) +{ + u16 wLength; + u16 wValue; + u16 wIndex; + + wValue = le16_to_cpu(ctrl->wValue); + wLength = le16_to_cpu(ctrl->wLength); + wIndex = le16_to_cpu(ctrl->wIndex); + + if (wIndex || wLength) + return -EINVAL; + + /* + * REVISIT It's unclear from Databook what to do with this + * value. For now, just cache it. + */ + dwc->isoch_delay = wValue; + + return 0; +} + static int dwc3_ep0_std_request(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl) { int ret; @@ -494,6 +619,14 @@ static int dwc3_ep0_std_request(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl) dev_vdbg(dwc->dev, "USB_REQ_SET_CONFIGURATION\n"); ret = dwc3_ep0_set_config(dwc, ctrl); break; + case USB_REQ_SET_SEL: + dev_vdbg(dwc->dev, "USB_REQ_SET_SEL\n"); + ret = dwc3_ep0_set_sel(dwc, ctrl); + break; + case USB_REQ_SET_ISOCH_DELAY: + dev_vdbg(dwc->dev, "USB_REQ_SET_ISOCH_DELAY\n"); + ret = dwc3_ep0_set_isoch_delay(dwc, ctrl); + break; default: dev_vdbg(dwc->dev, "Forwarding to gadget driver\n"); ret = dwc3_ep0_delegate_req(dwc, ctrl); |