summaryrefslogtreecommitdiffstats
path: root/drivers/usb/dwc3
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/dwc3')
-rw-r--r--drivers/usb/dwc3/core.c13
-rw-r--r--drivers/usb/dwc3/core.h107
-rw-r--r--drivers/usb/dwc3/dwc3-exynos.c1
-rw-r--r--drivers/usb/dwc3/ep0.c146
-rw-r--r--drivers/usb/dwc3/gadget.c363
-rw-r--r--drivers/usb/dwc3/gadget.h6
6 files changed, 407 insertions, 229 deletions
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 1040bdb8dc8..c34452a7304 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -148,6 +148,8 @@ static void dwc3_core_soft_reset(struct dwc3 *dwc)
reg &= ~DWC3_GUSB2PHYCFG_PHYSOFTRST;
dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
+ mdelay(100);
+
/* After PHYs are stable we can take Core out of reset state */
reg = dwc3_readl(dwc->regs, DWC3_GCTL);
reg &= ~DWC3_GCTL_CORESOFTRESET;
@@ -255,7 +257,7 @@ static int __devinit dwc3_alloc_event_buffers(struct dwc3 *dwc, unsigned length)
*
* Returns 0 on success otherwise negative errno.
*/
-static int __devinit dwc3_event_buffers_setup(struct dwc3 *dwc)
+static int dwc3_event_buffers_setup(struct dwc3 *dwc)
{
struct dwc3_event_buffer *evt;
int n;
@@ -266,6 +268,8 @@ static int __devinit dwc3_event_buffers_setup(struct dwc3 *dwc)
evt->buf, (unsigned long long) evt->dma,
evt->length);
+ evt->lpos = 0;
+
dwc3_writel(dwc->regs, DWC3_GEVNTADRLO(n),
lower_32_bits(evt->dma));
dwc3_writel(dwc->regs, DWC3_GEVNTADRHI(n),
@@ -285,6 +289,9 @@ static void dwc3_event_buffers_cleanup(struct dwc3 *dwc)
for (n = 0; n < dwc->num_event_buffers; n++) {
evt = dwc->ev_buffs[n];
+
+ evt->lpos = 0;
+
dwc3_writel(dwc->regs, DWC3_GEVNTADRLO(n), 0);
dwc3_writel(dwc->regs, DWC3_GEVNTADRHI(n), 0);
dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(n), 0);
@@ -328,8 +335,6 @@ static int __devinit dwc3_core_init(struct dwc3 *dwc)
}
dwc->revision = reg;
- dwc3_core_soft_reset(dwc);
-
/* issue device SoftReset too */
timeout = jiffies + msecs_to_jiffies(500);
dwc3_writel(dwc->regs, DWC3_DCTL, DWC3_DCTL_CSFTRST);
@@ -347,6 +352,8 @@ static int __devinit dwc3_core_init(struct dwc3 *dwc)
cpu_relax();
} while (true);
+ dwc3_core_soft_reset(dwc);
+
dwc3_cache_hwparams(dwc);
reg = dwc3_readl(dwc->regs, DWC3_GCTL);
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index f69c877add0..151eca876df 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -67,6 +67,7 @@
#define DWC3_DEVICE_EVENT_CONNECT_DONE 2
#define DWC3_DEVICE_EVENT_LINK_STATUS_CHANGE 3
#define DWC3_DEVICE_EVENT_WAKEUP 4
+#define DWC3_DEVICE_EVENT_HIBER_REQ 5
#define DWC3_DEVICE_EVENT_EOPF 6
#define DWC3_DEVICE_EVENT_SOF 7
#define DWC3_DEVICE_EVENT_ERRATIC_ERROR 9
@@ -171,28 +172,36 @@
#define DWC3_GCTL_PRTCAP_DEVICE 2
#define DWC3_GCTL_PRTCAP_OTG 3
-#define DWC3_GCTL_CORESOFTRESET (1 << 11)
-#define DWC3_GCTL_SCALEDOWN(n) ((n) << 4)
-#define DWC3_GCTL_SCALEDOWN_MASK DWC3_GCTL_SCALEDOWN(3)
-#define DWC3_GCTL_DISSCRAMBLE (1 << 3)
-#define DWC3_GCTL_DSBLCLKGTNG (1 << 0)
+#define DWC3_GCTL_CORESOFTRESET (1 << 11)
+#define DWC3_GCTL_SCALEDOWN(n) ((n) << 4)
+#define DWC3_GCTL_SCALEDOWN_MASK DWC3_GCTL_SCALEDOWN(3)
+#define DWC3_GCTL_DISSCRAMBLE (1 << 3)
+#define DWC3_GCTL_GBLHIBERNATIONEN (1 << 1)
+#define DWC3_GCTL_DSBLCLKGTNG (1 << 0)
/* Global USB2 PHY Configuration Register */
-#define DWC3_GUSB2PHYCFG_PHYSOFTRST (1 << 31)
-#define DWC3_GUSB2PHYCFG_SUSPHY (1 << 6)
+#define DWC3_GUSB2PHYCFG_PHYSOFTRST (1 << 31)
+#define DWC3_GUSB2PHYCFG_SUSPHY (1 << 6)
/* Global USB3 PIPE Control Register */
-#define DWC3_GUSB3PIPECTL_PHYSOFTRST (1 << 31)
-#define DWC3_GUSB3PIPECTL_SUSPHY (1 << 17)
+#define DWC3_GUSB3PIPECTL_PHYSOFTRST (1 << 31)
+#define DWC3_GUSB3PIPECTL_SUSPHY (1 << 17)
/* Global TX Fifo Size Register */
-#define DWC3_GTXFIFOSIZ_TXFDEF(n) ((n) & 0xffff)
-#define DWC3_GTXFIFOSIZ_TXFSTADDR(n) ((n) & 0xffff0000)
+#define DWC3_GTXFIFOSIZ_TXFDEF(n) ((n) & 0xffff)
+#define DWC3_GTXFIFOSIZ_TXFSTADDR(n) ((n) & 0xffff0000)
/* Global HWPARAMS1 Register */
#define DWC3_GHWPARAMS1_EN_PWROPT(n) (((n) & (3 << 24)) >> 24)
#define DWC3_GHWPARAMS1_EN_PWROPT_NO 0
#define DWC3_GHWPARAMS1_EN_PWROPT_CLK 1
+#define DWC3_GHWPARAMS1_EN_PWROPT_HIB 2
+#define DWC3_GHWPARAMS1_PWROPT(n) ((n) << 24)
+#define DWC3_GHWPARAMS1_PWROPT_MASK DWC3_GHWPARAMS1_PWROPT(3)
+
+/* Global HWPARAMS4 Register */
+#define DWC3_GHWPARAMS4_HIBER_SCRATCHBUFS(n) (((n) & (0x0f << 13)) >> 13)
+#define DWC3_MAX_HIBER_SCRATCHBUFS 15
/* Device Configuration Register */
#define DWC3_DCFG_LPM_CAP (1 << 22)
@@ -206,24 +215,32 @@
#define DWC3_DCFG_LOWSPEED (2 << 0)
#define DWC3_DCFG_FULLSPEED1 (3 << 0)
+#define DWC3_DCFG_LPM_CAP (1 << 22)
+
/* Device Control Register */
#define DWC3_DCTL_RUN_STOP (1 << 31)
#define DWC3_DCTL_CSFTRST (1 << 30)
#define DWC3_DCTL_LSFTRST (1 << 29)
#define DWC3_DCTL_HIRD_THRES_MASK (0x1f << 24)
-#define DWC3_DCTL_HIRD_THRES(n) (((n) & DWC3_DCTL_HIRD_THRES_MASK) >> 24)
+#define DWC3_DCTL_HIRD_THRES(n) ((n) << 24)
#define DWC3_DCTL_APPL1RES (1 << 23)
-#define DWC3_DCTL_TRGTULST_MASK (0x0f << 17)
-#define DWC3_DCTL_TRGTULST(n) ((n) << 17)
-
-#define DWC3_DCTL_TRGTULST_U2 (DWC3_DCTL_TRGTULST(2))
-#define DWC3_DCTL_TRGTULST_U3 (DWC3_DCTL_TRGTULST(3))
-#define DWC3_DCTL_TRGTULST_SS_DIS (DWC3_DCTL_TRGTULST(4))
-#define DWC3_DCTL_TRGTULST_RX_DET (DWC3_DCTL_TRGTULST(5))
-#define DWC3_DCTL_TRGTULST_SS_INACT (DWC3_DCTL_TRGTULST(6))
+/* These apply for core versions 1.87a and earlier */
+#define DWC3_DCTL_TRGTULST_MASK (0x0f << 17)
+#define DWC3_DCTL_TRGTULST(n) ((n) << 17)
+#define DWC3_DCTL_TRGTULST_U2 (DWC3_DCTL_TRGTULST(2))
+#define DWC3_DCTL_TRGTULST_U3 (DWC3_DCTL_TRGTULST(3))
+#define DWC3_DCTL_TRGTULST_SS_DIS (DWC3_DCTL_TRGTULST(4))
+#define DWC3_DCTL_TRGTULST_RX_DET (DWC3_DCTL_TRGTULST(5))
+#define DWC3_DCTL_TRGTULST_SS_INACT (DWC3_DCTL_TRGTULST(6))
+
+/* These apply for core versions 1.94a and later */
+#define DWC3_DCTL_KEEP_CONNECT (1 << 19)
+#define DWC3_DCTL_L1_HIBER_EN (1 << 18)
+#define DWC3_DCTL_CRS (1 << 17)
+#define DWC3_DCTL_CSS (1 << 16)
#define DWC3_DCTL_INITU2ENA (1 << 12)
#define DWC3_DCTL_ACCEPTU2ENA (1 << 11)
@@ -249,6 +266,7 @@
#define DWC3_DEVTEN_ERRTICERREN (1 << 9)
#define DWC3_DEVTEN_SOFEN (1 << 7)
#define DWC3_DEVTEN_EOPFEN (1 << 6)
+#define DWC3_DEVTEN_HIBERNATIONREQEVTEN (1 << 5)
#define DWC3_DEVTEN_WKUPEVTEN (1 << 4)
#define DWC3_DEVTEN_ULSTCNGEN (1 << 3)
#define DWC3_DEVTEN_CONNECTDONEEN (1 << 2)
@@ -256,7 +274,15 @@
#define DWC3_DEVTEN_DISCONNEVTEN (1 << 0)
/* Device Status Register */
+#define DWC3_DSTS_DCNRD (1 << 29)
+
+/* This applies for core versions 1.87a and earlier */
#define DWC3_DSTS_PWRUPREQ (1 << 24)
+
+/* These apply for core versions 1.94a and later */
+#define DWC3_DSTS_RSS (1 << 25)
+#define DWC3_DSTS_SSS (1 << 24)
+
#define DWC3_DSTS_COREIDLE (1 << 23)
#define DWC3_DSTS_DEVCTRLHLT (1 << 22)
@@ -265,7 +291,7 @@
#define DWC3_DSTS_RXFIFOEMPTY (1 << 17)
-#define DWC3_DSTS_SOFFN_MASK (0x3ff << 3)
+#define DWC3_DSTS_SOFFN_MASK (0x3fff << 3)
#define DWC3_DSTS_SOFFN(n) (((n) & DWC3_DSTS_SOFFN_MASK) >> 3)
#define DWC3_DSTS_CONNECTSPD (7 << 0)
@@ -280,6 +306,11 @@
#define DWC3_DGCMD_SET_LMP 0x01
#define DWC3_DGCMD_SET_PERIODIC_PAR 0x02
#define DWC3_DGCMD_XMIT_FUNCTION 0x03
+
+/* These apply for core versions 1.94a and later */
+#define DWC3_DGCMD_SET_SCRATCHPAD_ADDR_LO 0x04
+#define DWC3_DGCMD_SET_SCRATCHPAD_ADDR_HI 0x05
+
#define DWC3_DGCMD_SELECTED_FIFO_FLUSH 0x09
#define DWC3_DGCMD_ALL_FIFO_FLUSH 0x0a
#define DWC3_DGCMD_SET_ENDPOINT_NRDY 0x0c
@@ -287,6 +318,15 @@
#define DWC3_DGCMD_STATUS(n) (((n) >> 15) & 1)
#define DWC3_DGCMD_CMDACT (1 << 10)
+#define DWC3_DGCMD_CMDIOC (1 << 8)
+
+/* Device Generic Command Parameter Register */
+#define DWC3_DGCMDPAR_FORCE_LINKPM_ACCEPT (1 << 0)
+#define DWC3_DGCMDPAR_FIFO_NUM(n) ((n) << 0)
+#define DWC3_DGCMDPAR_RX_FIFO (0 << 5)
+#define DWC3_DGCMDPAR_TX_FIFO (1 << 5)
+#define DWC3_DGCMDPAR_LOOPBACK_DIS (0 << 0)
+#define DWC3_DGCMDPAR_LOOPBACK_ENA (1 << 0)
/* Device Endpoint Command Register */
#define DWC3_DEPCMD_PARAM_SHIFT 16
@@ -303,7 +343,10 @@
#define DWC3_DEPCMD_STARTTRANSFER (0x06 << 0)
#define DWC3_DEPCMD_CLEARSTALL (0x05 << 0)
#define DWC3_DEPCMD_SETSTALL (0x04 << 0)
+/* This applies for core versions 1.90a and earlier */
#define DWC3_DEPCMD_GETSEQNUMBER (0x03 << 0)
+/* This applies for core versions 1.94a and later */
+#define DWC3_DEPCMD_GETEPSTATE (0x03 << 0)
#define DWC3_DEPCMD_SETTRANSFRESOURCE (0x02 << 0)
#define DWC3_DEPCMD_SETEPCONFIG (0x01 << 0)
@@ -361,7 +404,8 @@ struct dwc3_event_buffer {
* @current_trb: index of current used trb
* @number: endpoint number (1 - 15)
* @type: set to bmAttributes & USB_ENDPOINT_XFERTYPE_MASK
- * @res_trans_idx: Resource transfer index
+ * @resource_index: Resource transfer index
+ * @current_uf: Current uf received through last event parameter
* @interval: the intervall on which the ISOC transfer is started
* @name: a human readable name e.g. ep1out-bulk
* @direction: true for TX, false for RX
@@ -385,6 +429,7 @@ struct dwc3_ep {
#define DWC3_EP_WEDGE (1 << 2)
#define DWC3_EP_BUSY (1 << 4)
#define DWC3_EP_PENDING_REQUEST (1 << 5)
+#define DWC3_EP_MISSED_ISOC (1 << 6)
/* This last one is specific to EP0 */
#define DWC3_EP0_DIR_IN (1 << 31)
@@ -393,7 +438,8 @@ struct dwc3_ep {
u8 number;
u8 type;
- u8 res_trans_idx;
+ u8 resource_index;
+ u16 current_uf;
u32 interval;
char name[20];
@@ -437,6 +483,8 @@ enum dwc3_link_state {
DWC3_LINK_STATE_HRESET = 0x09,
DWC3_LINK_STATE_CMPLY = 0x0a,
DWC3_LINK_STATE_LPBK = 0x0b,
+ DWC3_LINK_STATE_RESET = 0x0e,
+ DWC3_LINK_STATE_RESUME = 0x0f,
DWC3_LINK_STATE_MASK = 0x0f,
};
@@ -450,11 +498,12 @@ enum dwc3_device_state {
#define DWC3_TRB_SIZE_MASK (0x00ffffff)
#define DWC3_TRB_SIZE_LENGTH(n) ((n) & DWC3_TRB_SIZE_MASK)
#define DWC3_TRB_SIZE_PCM1(n) (((n) & 0x03) << 24)
-#define DWC3_TRB_SIZE_TRBSTS(n) (((n) & (0x0f << 28) >> 28))
+#define DWC3_TRB_SIZE_TRBSTS(n) (((n) & (0x0f << 28)) >> 28)
#define DWC3_TRBSTS_OK 0
#define DWC3_TRBSTS_MISSED_ISOC 1
#define DWC3_TRBSTS_SETUP_PENDING 2
+#define DWC3_TRB_STS_XFER_IN_PROG 4
/* TRB Control */
#define DWC3_TRB_CTRL_HWO (1 << 0)
@@ -543,6 +592,14 @@ struct dwc3_request {
unsigned queued:1;
};
+/*
+ * struct dwc3_scratchpad_array - hibernation scratchpad array
+ * (format defined by hw)
+ */
+struct dwc3_scratchpad_array {
+ __le64 dma_adr[DWC3_MAX_HIBER_SCRATCHBUFS];
+};
+
/**
* struct dwc3 - representation of our controller
* @ctrl_req: usb control request which is used for ep0
@@ -624,8 +681,10 @@ struct dwc3 {
#define DWC3_REVISION_180A 0x5533180a
#define DWC3_REVISION_183A 0x5533183a
#define DWC3_REVISION_185A 0x5533185a
+#define DWC3_REVISION_187A 0x5533187a
#define DWC3_REVISION_188A 0x5533188a
#define DWC3_REVISION_190A 0x5533190a
+#define DWC3_REVISION_194A 0x5533194a
#define DWC3_REVISION_200A 0x5533200a
#define DWC3_REVISION_202A 0x5533202a
#define DWC3_REVISION_210A 0x5533210a
diff --git a/drivers/usb/dwc3/dwc3-exynos.c b/drivers/usb/dwc3/dwc3-exynos.c
index d1903019808..b8f00389fa3 100644
--- a/drivers/usb/dwc3/dwc3-exynos.c
+++ b/drivers/usb/dwc3/dwc3-exynos.c
@@ -18,7 +18,6 @@
#include <linux/platform_device.h>
#include <linux/platform_data/dwc3-exynos.h>
#include <linux/dma-mapping.h>
-#include <linux/module.h>
#include <linux/clk.h>
#include "core.h"
diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
index 9e8a3dce69f..9b94886b66e 100644
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -54,7 +54,9 @@
#include "gadget.h"
#include "io.h"
-static void dwc3_ep0_do_control_status(struct dwc3 *dwc, u32 epnum);
+static void __dwc3_ep0_do_control_status(struct dwc3 *dwc, struct dwc3_ep *dep);
+static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
+ struct dwc3_ep *dep, struct dwc3_request *req);
static const char *dwc3_ep0_state_string(enum dwc3_ep0_state state)
{
@@ -111,7 +113,7 @@ static int dwc3_ep0_start_trans(struct dwc3 *dwc, u8 epnum, dma_addr_t buf_dma,
}
dep->flags |= DWC3_EP_BUSY;
- dep->res_trans_idx = dwc3_gadget_ep_get_transfer_index(dwc,
+ dep->resource_index = dwc3_gadget_ep_get_transfer_index(dwc,
dep->number);
dwc->ep0_next_event = DWC3_EP0_COMPLETE;
@@ -150,16 +152,15 @@ static int __dwc3_gadget_ep0_queue(struct dwc3_ep *dep,
return 0;
}
- ret = dwc3_ep0_start_trans(dwc, direction,
- req->request.dma, req->request.length,
- DWC3_TRBCTL_CONTROL_DATA);
+ __dwc3_ep0_do_control_data(dwc, dwc->eps[direction], req);
+
dep->flags &= ~(DWC3_EP_PENDING_REQUEST |
DWC3_EP0_DIR_IN);
} else if (dwc->delayed_status) {
dwc->delayed_status = false;
if (dwc->ep0state == EP0_STATUS_PHASE)
- dwc3_ep0_do_control_status(dwc, 1);
+ __dwc3_ep0_do_control_status(dwc, dwc->eps[1]);
else
dev_dbg(dwc->dev, "too early for delayed status\n");
}
@@ -224,6 +225,16 @@ static void dwc3_ep0_stall_and_restart(struct dwc3 *dwc)
dwc3_ep0_out_start(dwc);
}
+int dwc3_gadget_ep0_set_halt(struct usb_ep *ep, int value)
+{
+ struct dwc3_ep *dep = to_dwc3_ep(ep);
+ struct dwc3 *dwc = dep->dwc;
+
+ dwc3_ep0_stall_and_restart(dwc);
+
+ return 0;
+}
+
void dwc3_ep0_out_start(struct dwc3 *dwc)
{
int ret;
@@ -463,6 +474,7 @@ static int dwc3_ep0_set_config(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
{
u32 cfg;
int ret;
+ u32 reg;
dwc->start_config_issued = false;
cfg = le16_to_cpu(ctrl->wValue);
@@ -477,6 +489,14 @@ static int dwc3_ep0_set_config(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
/* if the cfg matches and the cfg is non zero */
if (cfg && (!ret || (ret == USB_GADGET_DELAYED_STATUS))) {
dwc->dev_state = DWC3_CONFIGURED_STATE;
+ /*
+ * Enable transition to U1/U2 state when
+ * nothing is pending from application.
+ */
+ reg = dwc3_readl(dwc->regs, DWC3_DCTL);
+ reg |= (DWC3_DCTL_ACCEPTU1ENA | DWC3_DCTL_ACCEPTU2ENA);
+ dwc3_writel(dwc->regs, DWC3_DCTL, reg);
+
dwc->resize_fifos = true;
dev_dbg(dwc->dev, "resize fifos flag SET\n");
}
@@ -514,8 +534,8 @@ static void dwc3_ep0_set_sel_cmpl(struct usb_ep *ep, struct usb_request *req)
dwc->u1sel = timing.u1sel;
dwc->u1pel = timing.u1pel;
- dwc->u2sel = timing.u2sel;
- dwc->u2pel = timing.u2pel;
+ dwc->u2sel = le16_to_cpu(timing.u2sel);
+ dwc->u2pel = le16_to_cpu(timing.u2pel);
reg = dwc3_readl(dwc->regs, DWC3_DCTL);
if (reg & DWC3_DCTL_INITU2ENA)
@@ -640,11 +660,11 @@ static void dwc3_ep0_inspect_setup(struct dwc3 *dwc,
const struct dwc3_event_depevt *event)
{
struct usb_ctrlrequest *ctrl = dwc->ctrl_req;
- int ret;
+ int ret = -EINVAL;
u32 len;
if (!dwc->gadget_driver)
- goto err;
+ goto out;
len = le16_to_cpu(ctrl->wLength);
if (!len) {
@@ -665,11 +685,9 @@ static void dwc3_ep0_inspect_setup(struct dwc3 *dwc,
if (ret == USB_GADGET_DELAYED_STATUS)
dwc->delayed_status = true;
- if (ret >= 0)
- return;
-
-err:
- dwc3_ep0_stall_and_restart(dwc);
+out:
+ if (ret < 0)
+ dwc3_ep0_stall_and_restart(dwc);
}
static void dwc3_ep0_complete_data(struct dwc3 *dwc,
@@ -723,7 +741,7 @@ static void dwc3_ep0_complete_data(struct dwc3 *dwc,
}
}
-static void dwc3_ep0_complete_req(struct dwc3 *dwc,
+static void dwc3_ep0_complete_status(struct dwc3 *dwc,
const struct dwc3_event_depevt *event)
{
struct dwc3_request *r;
@@ -745,6 +763,7 @@ static void dwc3_ep0_complete_req(struct dwc3 *dwc,
dev_dbg(dwc->dev, "Invalid Test #%d\n",
dwc->test_mode_nr);
dwc3_ep0_stall_and_restart(dwc);
+ return;
}
}
@@ -758,7 +777,7 @@ static void dwc3_ep0_xfer_complete(struct dwc3 *dwc,
struct dwc3_ep *dep = dwc->eps[event->endpoint_number];
dep->flags &= ~DWC3_EP_BUSY;
- dep->res_trans_idx = 0;
+ dep->resource_index = 0;
dwc->setup_packet_pending = false;
switch (dwc->ep0state) {
@@ -774,7 +793,7 @@ static void dwc3_ep0_xfer_complete(struct dwc3 *dwc,
case EP0_STATUS_PHASE:
dev_vdbg(dwc->dev, "Status Phase\n");
- dwc3_ep0_complete_req(dwc, event);
+ dwc3_ep0_complete_status(dwc, event);
break;
default:
WARN(true, "UNKNOWN ep0state %d\n", dwc->ep0state);
@@ -787,68 +806,81 @@ static void dwc3_ep0_do_control_setup(struct dwc3 *dwc,
dwc3_ep0_out_start(dwc);
}
-static void dwc3_ep0_do_control_data(struct dwc3 *dwc,
- const struct dwc3_event_depevt *event)
+static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
+ struct dwc3_ep *dep, struct dwc3_request *req)
{
- struct dwc3_ep *dep;
- struct dwc3_request *req;
int ret;
- dep = dwc->eps[0];
-
- if (list_empty(&dep->request_list)) {
- dev_vdbg(dwc->dev, "pending request for EP0 Data phase\n");
- dep->flags |= DWC3_EP_PENDING_REQUEST;
-
- if (event->endpoint_number)
- dep->flags |= DWC3_EP0_DIR_IN;
- return;
- }
-
- req = next_request(&dep->request_list);
- req->direction = !!event->endpoint_number;
+ req->direction = !!dep->number;
if (req->request.length == 0) {
- ret = dwc3_ep0_start_trans(dwc, event->endpoint_number,
+ ret = dwc3_ep0_start_trans(dwc, dep->number,
dwc->ctrl_req_addr, 0,
DWC3_TRBCTL_CONTROL_DATA);
- } else if ((req->request.length % dep->endpoint.maxpacket)
- && (event->endpoint_number == 0)) {
+ } else if (!IS_ALIGNED(req->request.length, dep->endpoint.maxpacket)
+ && (dep->number == 0)) {
+ u32 transfer_size;
+
ret = usb_gadget_map_request(&dwc->gadget, &req->request,
- event->endpoint_number);
+ dep->number);
if (ret) {
dev_dbg(dwc->dev, "failed to map request\n");
return;
}
- WARN_ON(req->request.length > dep->endpoint.maxpacket);
+ WARN_ON(req->request.length > DWC3_EP0_BOUNCE_SIZE);
+
+ transfer_size = roundup(req->request.length,
+ (u32) dep->endpoint.maxpacket);
dwc->ep0_bounced = true;
/*
- * REVISIT in case request length is bigger than EP0
- * wMaxPacketSize, we will need two chained TRBs to handle
- * the transfer.
+ * REVISIT in case request length is bigger than
+ * DWC3_EP0_BOUNCE_SIZE we will need two chained
+ * TRBs to handle the transfer.
*/
- ret = dwc3_ep0_start_trans(dwc, event->endpoint_number,
- dwc->ep0_bounce_addr, dep->endpoint.maxpacket,
+ ret = dwc3_ep0_start_trans(dwc, dep->number,
+ dwc->ep0_bounce_addr, transfer_size,
DWC3_TRBCTL_CONTROL_DATA);
} else {
ret = usb_gadget_map_request(&dwc->gadget, &req->request,
- event->endpoint_number);
+ dep->number);
if (ret) {
dev_dbg(dwc->dev, "failed to map request\n");
return;
}
- ret = dwc3_ep0_start_trans(dwc, event->endpoint_number,
- req->request.dma, req->request.length,
- DWC3_TRBCTL_CONTROL_DATA);
+ ret = dwc3_ep0_start_trans(dwc, dep->number, req->request.dma,
+ req->request.length, DWC3_TRBCTL_CONTROL_DATA);
}
WARN_ON(ret < 0);
}
+static void dwc3_ep0_do_control_data(struct dwc3 *dwc,
+ const struct dwc3_event_depevt *event)
+{
+ struct dwc3_ep *dep;
+ struct dwc3_request *req;
+
+ dep = dwc->eps[0];
+
+ if (list_empty(&dep->request_list)) {
+ dev_vdbg(dwc->dev, "pending request for EP0 Data phase\n");
+ dep->flags |= DWC3_EP_PENDING_REQUEST;
+
+ if (event->endpoint_number)
+ dep->flags |= DWC3_EP0_DIR_IN;
+ return;
+ }
+
+ req = next_request(&dep->request_list);
+ dep = dwc->eps[event->endpoint_number];
+
+ __dwc3_ep0_do_control_data(dwc, dep, req);
+}
+
static int dwc3_ep0_start_control_status(struct dwc3_ep *dep)
{
struct dwc3 *dwc = dep->dwc;
@@ -861,10 +893,8 @@ static int dwc3_ep0_start_control_status(struct dwc3_ep *dep)
dwc->ctrl_req_addr, 0, type);
}
-static void dwc3_ep0_do_control_status(struct dwc3 *dwc, u32 epnum)
+static void __dwc3_ep0_do_control_status(struct dwc3 *dwc, struct dwc3_ep *dep)
{
- struct dwc3_ep *dep = dwc->eps[epnum];
-
if (dwc->resize_fifos) {
dev_dbg(dwc->dev, "starting to resize fifos\n");
dwc3_gadget_resize_tx_fifos(dwc);
@@ -874,13 +904,21 @@ static void dwc3_ep0_do_control_status(struct dwc3 *dwc, u32 epnum)
WARN_ON(dwc3_ep0_start_control_status(dep));
}
+static void dwc3_ep0_do_control_status(struct dwc3 *dwc,
+ const struct dwc3_event_depevt *event)
+{
+ struct dwc3_ep *dep = dwc->eps[event->endpoint_number];
+
+ __dwc3_ep0_do_control_status(dwc, dep);
+}
+
static void dwc3_ep0_xfernotready(struct dwc3 *dwc,
const struct dwc3_event_depevt *event)
{
dwc->setup_packet_pending = true;
/*
- * This part is very tricky: If we has just handled
+ * This part is very tricky: If we have just handled
* XferNotReady(Setup) and we're now expecting a
* XferComplete but, instead, we receive another
* XferNotReady(Setup), we should STALL and restart
@@ -974,7 +1012,7 @@ static void dwc3_ep0_xfernotready(struct dwc3 *dwc,
return;
}
- dwc3_ep0_do_control_status(dwc, event->endpoint_number);
+ dwc3_ep0_do_control_status(dwc, event);
}
}
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 4f3e8811dae..58fdfad96b4 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -100,6 +100,23 @@ int dwc3_gadget_set_link_state(struct dwc3 *dwc, enum dwc3_link_state state)
int retries = 10000;
u32 reg;
+ /*
+ * Wait until device controller is ready. Only applies to 1.94a and
+ * later RTL.
+ */
+ if (dwc->revision >= DWC3_REVISION_194A) {
+ while (--retries) {
+ reg = dwc3_readl(dwc->regs, DWC3_DSTS);
+ if (reg & DWC3_DSTS_DCNRD)
+ udelay(5);
+ else
+ break;
+ }
+
+ if (retries <= 0)
+ return -ETIMEDOUT;
+ }
+
reg = dwc3_readl(dwc->regs, DWC3_DCTL);
reg &= ~DWC3_DCTL_ULSTCHNGREQ_MASK;
@@ -107,7 +124,15 @@ int dwc3_gadget_set_link_state(struct dwc3 *dwc, enum dwc3_link_state state)
reg |= DWC3_DCTL_ULSTCHNGREQ(state);
dwc3_writel(dwc->regs, DWC3_DCTL, reg);
+ /*
+ * The following code is racy when called from dwc3_gadget_wakeup,
+ * and is not needed, at least on newer versions
+ */
+ if (dwc->revision >= DWC3_REVISION_194A)
+ return 0;
+
/* wait for a change in DSTS */
+ retries = 10000;
while (--retries) {
reg = dwc3_readl(dwc->regs, DWC3_DSTS);
@@ -265,8 +290,8 @@ static const char *dwc3_gadget_ep_cmd_string(u8 cmd)
return "Clear Stall";
case DWC3_DEPCMD_SETSTALL:
return "Set Stall";
- case DWC3_DEPCMD_GETSEQNUMBER:
- return "Get Data Sequence Number";
+ case DWC3_DEPCMD_GETEPSTATE:
+ return "Get Endpoint State";
case DWC3_DEPCMD_SETTRANSFRESOURCE:
return "Set Endpoint Transfer Resource";
case DWC3_DEPCMD_SETEPCONFIG:
@@ -530,9 +555,37 @@ static void dwc3_remove_requests(struct dwc3 *dwc, struct dwc3_ep *dep)
{
struct dwc3_request *req;
- if (!list_empty(&dep->req_queued))
+ if (!list_empty(&dep->req_queued)) {
dwc3_stop_active_transfer(dwc, dep->number);
+ /*
+ * NOTICE: We are violating what the Databook says about the
+ * EndTransfer command. Ideally we would _always_ wait for the
+ * EndTransfer Command Completion IRQ, but that's causing too
+ * much trouble synchronizing between us and gadget driver.
+ *
+ * We have discussed this with the IP Provider and it was
+ * suggested to giveback all requests here, but give HW some
+ * extra time to synchronize with the interconnect. We're using
+ * an arbitraty 100us delay for that.
+ *
+ * Note also that a similar handling was tested by Synopsys
+ * (thanks a lot Paul) and nothing bad has come out of it.
+ * In short, what we're doing is:
+ *
+ * - Issue EndTransfer WITH CMDIOC bit set
+ * - Wait 100us
+ * - giveback all requests to gadget driver
+ */
+ udelay(100);
+
+ while (!list_empty(&dep->req_queued)) {
+ req = next_request(&dep->req_queued);
+
+ dwc3_gadget_giveback(dep, req, -ESHUTDOWN);
+ }
+ }
+
while (!list_empty(&dep->request_list)) {
req = next_request(&dep->request_list);
@@ -741,8 +794,7 @@ static void dwc3_prepare_one_trb(struct dwc3_ep *dep,
case USB_ENDPOINT_XFER_ISOC:
trb->ctrl = DWC3_TRBCTL_ISOCHRONOUS_FIRST;
- /* IOC every DWC3_TRB_NUM / 4 so we can refill */
- if (!(cur_slot % (DWC3_TRB_NUM / 4)))
+ if (!req->request.no_interrupt)
trb->ctrl |= DWC3_TRB_CTRL_IOC;
break;
@@ -958,14 +1010,42 @@ static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep, u16 cmd_param,
dep->flags |= DWC3_EP_BUSY;
if (start_new) {
- dep->res_trans_idx = dwc3_gadget_ep_get_transfer_index(dwc,
+ dep->resource_index = dwc3_gadget_ep_get_transfer_index(dwc,
dep->number);
- WARN_ON_ONCE(!dep->res_trans_idx);
+ WARN_ON_ONCE(!dep->resource_index);
}
return 0;
}
+static void __dwc3_gadget_start_isoc(struct dwc3 *dwc,
+ struct dwc3_ep *dep, u32 cur_uf)
+{
+ u32 uf;
+
+ if (list_empty(&dep->request_list)) {
+ dev_vdbg(dwc->dev, "ISOC ep %s run out for requests.\n",
+ dep->name);
+ return;
+ }
+
+ /* 4 micro frames in the future */
+ uf = cur_uf + dep->interval * 4;
+
+ __dwc3_gadget_kick_transfer(dep, uf, 1);
+}
+
+static void dwc3_gadget_start_isoc(struct dwc3 *dwc,
+ struct dwc3_ep *dep, const struct dwc3_event_depevt *event)
+{
+ u32 cur_uf, mask;
+
+ mask = ~(dep->interval - 1);
+ cur_uf = event->parameters & mask;
+
+ __dwc3_gadget_start_isoc(dwc, dep, cur_uf);
+}
+
static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req)
{
struct dwc3 *dwc = dep->dwc;
@@ -995,11 +1075,8 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req)
list_add_tail(&req->list, &dep->request_list);
- if (usb_endpoint_xfer_isoc(dep->endpoint.desc) && (dep->flags & DWC3_EP_BUSY))
- dep->flags |= DWC3_EP_PENDING_REQUEST;
-
/*
- * There are two special cases:
+ * There are a few special cases:
*
* 1. XferNotReady with empty list of requests. We need to kick the
* transfer here in that situation, otherwise we will be NAKing
@@ -1008,31 +1085,46 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req)
* able to receive the data until the next request is queued.
* The following code is handling exactly that.
*
- * 2. XferInProgress on Isoc EP with an active transfer. We need to
- * kick the transfer here after queuing a request, otherwise the
- * core may not see the modified TRB(s).
*/
if (dep->flags & DWC3_EP_PENDING_REQUEST) {
int ret;
- int start_trans = 1;
- u8 trans_idx = dep->res_trans_idx;
- if (usb_endpoint_xfer_isoc(dep->endpoint.desc) &&
- (dep->flags & DWC3_EP_BUSY)) {
- start_trans = 0;
- WARN_ON_ONCE(!trans_idx);
- } else {
- trans_idx = 0;
+ ret = __dwc3_gadget_kick_transfer(dep, 0, true);
+ if (ret && ret != -EBUSY) {
+ struct dwc3 *dwc = dep->dwc;
+
+ dev_dbg(dwc->dev, "%s: failed to kick transfers\n",
+ dep->name);
}
+ }
- ret = __dwc3_gadget_kick_transfer(dep, trans_idx, start_trans);
+ /*
+ * 2. XferInProgress on Isoc EP with an active transfer. We need to
+ * kick the transfer here after queuing a request, otherwise the
+ * core may not see the modified TRB(s).
+ */
+ if (usb_endpoint_xfer_isoc(dep->endpoint.desc) &&
+ (dep->flags & DWC3_EP_BUSY)) {
+ WARN_ON_ONCE(!dep->resource_index);
+ ret = __dwc3_gadget_kick_transfer(dep, dep->resource_index,
+ false);
if (ret && ret != -EBUSY) {
struct dwc3 *dwc = dep->dwc;
dev_dbg(dwc->dev, "%s: failed to kick transfers\n",
dep->name);
}
- };
+ }
+
+ /*
+ * 3. Missed ISOC Handling. We need to start isoc transfer on the saved
+ * uframe number.
+ */
+ if (usb_endpoint_xfer_isoc(dep->endpoint.desc) &&
+ (dep->flags & DWC3_EP_MISSED_ISOC)) {
+ __dwc3_gadget_start_isoc(dwc, dep, dep->current_uf);
+ dep->flags &= ~DWC3_EP_MISSED_ISOC;
+ }
return 0;
}
@@ -1118,15 +1210,6 @@ int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value)
memset(&params, 0x00, sizeof(params));
if (value) {
- if (dep->number == 0 || dep->number == 1) {
- /*
- * Whenever EP0 is stalled, we will restart
- * the state machine, thus moving back to
- * Setup Phase
- */
- dwc->ep0state = EP0_SETUP_PHASE;
- }
-
ret = dwc3_send_gadget_ep_cmd(dwc, dep->number,
DWC3_DEPCMD_SETSTALL, &params);
if (ret)
@@ -1186,7 +1269,10 @@ static int dwc3_gadget_ep_set_wedge(struct usb_ep *ep)
dep->flags |= DWC3_EP_WEDGE;
spin_unlock_irqrestore(&dwc->lock, flags);
- return dwc3_gadget_ep_set_halt(ep, 1);
+ if (dep->number == 0 || dep->number == 1)
+ return dwc3_gadget_ep0_set_halt(ep, 1);
+ else
+ return dwc3_gadget_ep_set_halt(ep, 1);
}
/* -------------------------------------------------------------------------- */
@@ -1204,7 +1290,7 @@ static const struct usb_ep_ops dwc3_gadget_ep0_ops = {
.free_request = dwc3_gadget_ep_free_request,
.queue = dwc3_gadget_ep0_queue,
.dequeue = dwc3_gadget_ep_dequeue,
- .set_halt = dwc3_gadget_ep_set_halt,
+ .set_halt = dwc3_gadget_ep0_set_halt,
.set_wedge = dwc3_gadget_ep_set_wedge,
};
@@ -1280,9 +1366,13 @@ static int dwc3_gadget_wakeup(struct usb_gadget *g)
goto out;
}
- /* write zeroes to Link Change Request */
- reg &= ~DWC3_DCTL_ULSTCHNGREQ_MASK;
- dwc3_writel(dwc->regs, DWC3_DCTL, reg);
+ /* Recent versions do this automatically */
+ if (dwc->revision < DWC3_REVISION_194A) {
+ /* write zeroes to Link Change Request */
+ reg = dwc3_readl(dwc->regs, DWC3_DCTL);
+ reg &= ~DWC3_DCTL_ULSTCHNGREQ_MASK;
+ dwc3_writel(dwc->regs, DWC3_DCTL, reg);
+ }
/* poll until Link State changes to ON */
timeout = jiffies + msecs_to_jiffies(100);
@@ -1319,16 +1409,21 @@ static int dwc3_gadget_set_selfpowered(struct usb_gadget *g,
return 0;
}
-static void dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on)
+static int dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on)
{
u32 reg;
u32 timeout = 500;
reg = dwc3_readl(dwc->regs, DWC3_DCTL);
if (is_on) {
- reg &= ~DWC3_DCTL_TRGTULST_MASK;
- reg |= (DWC3_DCTL_RUN_STOP
- | DWC3_DCTL_TRGTULST_RX_DET);
+ if (dwc->revision <= DWC3_REVISION_187A) {
+ reg &= ~DWC3_DCTL_TRGTULST_MASK;
+ reg |= DWC3_DCTL_TRGTULST_RX_DET;
+ }
+
+ if (dwc->revision >= DWC3_REVISION_194A)
+ reg &= ~DWC3_DCTL_KEEP_CONNECT;
+ reg |= DWC3_DCTL_RUN_STOP;
} else {
reg &= ~DWC3_DCTL_RUN_STOP;
}
@@ -1346,7 +1441,7 @@ static void dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on)
}
timeout--;
if (!timeout)
- break;
+ return -ETIMEDOUT;
udelay(1);
} while (1);
@@ -1354,20 +1449,23 @@ static void dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on)
dwc->gadget_driver
? dwc->gadget_driver->function : "no-function",
is_on ? "connect" : "disconnect");
+
+ return 0;
}
static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on)
{
struct dwc3 *dwc = gadget_to_dwc(g);
unsigned long flags;
+ int ret;
is_on = !!is_on;
spin_lock_irqsave(&dwc->lock, flags);
- dwc3_gadget_run_stop(dwc, is_on);
+ ret = dwc3_gadget_run_stop(dwc, is_on);
spin_unlock_irqrestore(&dwc->lock, flags);
- return 0;
+ return ret;
}
static int dwc3_gadget_start(struct usb_gadget *g,
@@ -1468,6 +1566,7 @@ static int dwc3_gadget_stop(struct usb_gadget *g,
return 0;
}
+
static const struct usb_gadget_ops dwc3_gadget_ops = {
.get_frame = dwc3_gadget_get_frame,
.wakeup = dwc3_gadget_wakeup,
@@ -1558,6 +1657,7 @@ static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, struct dwc3_ep *dep,
struct dwc3_trb *trb;
unsigned int count;
unsigned int s_pkt = 0;
+ unsigned int trb_status;
do {
req = next_request(&dep->req_queued);
@@ -1583,9 +1683,18 @@ static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, struct dwc3_ep *dep,
if (dep->direction) {
if (count) {
- dev_err(dwc->dev, "incomplete IN transfer %s\n",
- dep->name);
- status = -ECONNRESET;
+ trb_status = DWC3_TRB_SIZE_TRBSTS(trb->size);
+ if (trb_status == DWC3_TRBSTS_MISSED_ISOC) {
+ dev_dbg(dwc->dev, "incomplete IN transfer %s\n",
+ dep->name);
+ dep->current_uf = event->parameters &
+ ~(dep->interval - 1);
+ dep->flags |= DWC3_EP_MISSED_ISOC;
+ } else {
+ dev_err(dwc->dev, "incomplete IN transfer %s\n",
+ dep->name);
+ status = -ECONNRESET;
+ }
}
} else {
if (count && (event->status & DEPEVT_STATUS_SHORT))
@@ -1604,7 +1713,8 @@ static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, struct dwc3_ep *dep,
if (s_pkt)
break;
if ((event->status & DEPEVT_STATUS_LST) &&
- (trb->ctrl & DWC3_TRB_CTRL_LST))
+ (trb->ctrl & (DWC3_TRB_CTRL_LST |
+ DWC3_TRB_CTRL_HWO)))
break;
if ((event->status & DEPEVT_STATUS_IOC) &&
(trb->ctrl & DWC3_TRB_CTRL_IOC))
@@ -1657,65 +1767,6 @@ static void dwc3_endpoint_transfer_complete(struct dwc3 *dwc,
}
}
-static void dwc3_gadget_start_isoc(struct dwc3 *dwc,
- struct dwc3_ep *dep, const struct dwc3_event_depevt *event)
-{
- u32 uf, mask;
-
- if (list_empty(&dep->request_list)) {
- dev_vdbg(dwc->dev, "ISOC ep %s run out for requests.\n",
- dep->name);
- return;
- }
-
- mask = ~(dep->interval - 1);
- uf = event->parameters & mask;
- /* 4 micro frames in the future */
- uf += dep->interval * 4;
-
- __dwc3_gadget_kick_transfer(dep, uf, 1);
-}
-
-static void dwc3_process_ep_cmd_complete(struct dwc3_ep *dep,
- const struct dwc3_event_depevt *event)
-{
- struct dwc3 *dwc = dep->dwc;
- struct dwc3_event_depevt mod_ev = *event;
-
- /*
- * We were asked to remove one request. It is possible that this
- * request and a few others were started together and have the same
- * transfer index. Since we stopped the complete endpoint we don't
- * know how many requests were already completed (and not yet)
- * reported and how could be done (later). We purge them all until
- * the end of the list.
- */
- mod_ev.status = DEPEVT_STATUS_LST;
- dwc3_cleanup_done_reqs(dwc, dep, &mod_ev, -ESHUTDOWN);
- dep->flags &= ~DWC3_EP_BUSY;
- /* pending requests are ignored and are queued on XferNotReady */
-}
-
-static void dwc3_ep_cmd_compl(struct dwc3_ep *dep,
- const struct dwc3_event_depevt *event)
-{
- u32 param = event->parameters;
- u32 cmd_type = (param >> 8) & ((1 << 5) - 1);
-
- switch (cmd_type) {
- case DWC3_DEPCMD_ENDTRANSFER:
- dwc3_process_ep_cmd_complete(dep, event);
- break;
- case DWC3_DEPCMD_STARTTRANSFER:
- dep->res_trans_idx = param & 0x7f;
- break;
- default:
- printk(KERN_ERR "%s() unknown /unexpected type: %d\n",
- __func__, cmd_type);
- break;
- };
-}
-
static void dwc3_endpoint_interrupt(struct dwc3 *dwc,
const struct dwc3_event_depevt *event)
{
@@ -1724,6 +1775,9 @@ static void dwc3_endpoint_interrupt(struct dwc3 *dwc,
dep = dwc->eps[epnum];
+ if (!(dep->flags & DWC3_EP_ENABLED))
+ return;
+
dev_vdbg(dwc->dev, "%s: %s\n", dep->name,
dwc3_ep_event_string(event->endpoint_event));
@@ -1734,7 +1788,7 @@ static void dwc3_endpoint_interrupt(struct dwc3 *dwc,
switch (event->endpoint_event) {
case DWC3_DEPEVT_XFERCOMPLETE:
- dep->res_trans_idx = 0;
+ dep->resource_index = 0;
if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
dev_dbg(dwc->dev, "%s is an Isochronous endpoint\n",
@@ -1797,7 +1851,7 @@ static void dwc3_endpoint_interrupt(struct dwc3 *dwc,
dev_dbg(dwc->dev, "%s FIFO Overrun\n", dep->name);
break;
case DWC3_DEPEVT_EPCMDCMPLT:
- dwc3_ep_cmd_compl(dep, event);
+ dev_vdbg(dwc->dev, "Endpoint Command Complete\n");
break;
}
}
@@ -1820,16 +1874,16 @@ static void dwc3_stop_active_transfer(struct dwc3 *dwc, u32 epnum)
dep = dwc->eps[epnum];
- WARN_ON(!dep->res_trans_idx);
- if (dep->res_trans_idx) {
- cmd = DWC3_DEPCMD_ENDTRANSFER;
- cmd |= DWC3_DEPCMD_HIPRI_FORCERM | DWC3_DEPCMD_CMDIOC;
- cmd |= DWC3_DEPCMD_PARAM(dep->res_trans_idx);
- memset(&params, 0, sizeof(params));
- ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, cmd, &params);
- WARN_ON_ONCE(ret);
- dep->res_trans_idx = 0;
- }
+ if (!dep->resource_index)
+ return;
+
+ cmd = DWC3_DEPCMD_ENDTRANSFER;
+ cmd |= DWC3_DEPCMD_HIPRI_FORCERM | DWC3_DEPCMD_CMDIOC;
+ cmd |= DWC3_DEPCMD_PARAM(dep->resource_index);
+ memset(&params, 0, sizeof(params));
+ ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, cmd, &params);
+ WARN_ON_ONCE(ret);
+ dep->resource_index = 0;
}
static void dwc3_stop_active_transfers(struct dwc3 *dwc)
@@ -1872,11 +1926,9 @@ static void dwc3_clear_stall_all_ep(struct dwc3 *dwc)
static void dwc3_gadget_disconnect_interrupt(struct dwc3 *dwc)
{
+ int reg;
+
dev_vdbg(dwc->dev, "%s\n", __func__);
-#if 0
- XXX
- U1/U2 is powersave optimization. Skip it for now. Anyway we need to
- enable it before we can disable it.
reg = dwc3_readl(dwc->regs, DWC3_DCTL);
reg &= ~DWC3_DCTL_INITU1ENA;
@@ -1884,9 +1936,7 @@ static void dwc3_gadget_disconnect_interrupt(struct dwc3 *dwc)
reg &= ~DWC3_DCTL_INITU2ENA;
dwc3_writel(dwc->regs, DWC3_DCTL, reg);
-#endif
- dwc3_stop_active_transfers(dwc);
dwc3_disconnect_gadget(dwc);
dwc->start_config_issued = false;
@@ -1894,30 +1944,30 @@ static void dwc3_gadget_disconnect_interrupt(struct dwc3 *dwc)
dwc->setup_packet_pending = false;
}
-static void dwc3_gadget_usb3_phy_power(struct dwc3 *dwc, int on)
+static void dwc3_gadget_usb3_phy_suspend(struct dwc3 *dwc, int suspend)
{
u32 reg;
reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0));
- if (on)
- reg &= ~DWC3_GUSB3PIPECTL_SUSPHY;
- else
+ if (suspend)
reg |= DWC3_GUSB3PIPECTL_SUSPHY;
+ else
+ reg &= ~DWC3_GUSB3PIPECTL_SUSPHY;
dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg);
}
-static void dwc3_gadget_usb2_phy_power(struct dwc3 *dwc, int on)
+static void dwc3_gadget_usb2_phy_suspend(struct dwc3 *dwc, int suspend)
{
u32 reg;
reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
- if (on)
- reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;
- else
+ if (suspend)
reg |= DWC3_GUSB2PHYCFG_SUSPHY;
+ else
+ reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;
dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
}
@@ -1962,16 +2012,18 @@ static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc)
/* after reset -> Default State */
dwc->dev_state = DWC3_DEFAULT_STATE;
- /* Enable PHYs */
- dwc3_gadget_usb2_phy_power(dwc, true);
- dwc3_gadget_usb3_phy_power(dwc, true);
+ /* Recent versions support automatic phy suspend and don't need this */
+ if (dwc->revision < DWC3_REVISION_194A) {
+ /* Resume PHYs */
+ dwc3_gadget_usb2_phy_suspend(dwc, false);
+ dwc3_gadget_usb3_phy_suspend(dwc, false);
+ }
if (dwc->gadget.speed != USB_SPEED_UNKNOWN)
dwc3_disconnect_gadget(dwc);
reg = dwc3_readl(dwc->regs, DWC3_DCTL);
reg &= ~DWC3_DCTL_TSTCTRL_MASK;
- reg &= ~(DWC3_DCTL_INITU1ENA | DWC3_DCTL_INITU2ENA);
dwc3_writel(dwc->regs, DWC3_DCTL, reg);
dwc->test_mode = false;
@@ -2010,16 +2062,16 @@ static void dwc3_update_ram_clk_sel(struct dwc3 *dwc, u32 speed)
dwc3_writel(dwc->regs, DWC3_GCTL, reg);
}
-static void dwc3_gadget_disable_phy(struct dwc3 *dwc, u8 speed)
+static void dwc3_gadget_phy_suspend(struct dwc3 *dwc, u8 speed)
{
switch (speed) {
case USB_SPEED_SUPER:
- dwc3_gadget_usb2_phy_power(dwc, false);
+ dwc3_gadget_usb2_phy_suspend(dwc, true);
break;
case USB_SPEED_HIGH:
case USB_SPEED_FULL:
case USB_SPEED_LOW:
- dwc3_gadget_usb3_phy_power(dwc, false);
+ dwc3_gadget_usb3_phy_suspend(dwc, true);
break;
}
}
@@ -2082,8 +2134,11 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
break;
}
- /* Disable unneded PHY */
- dwc3_gadget_disable_phy(dwc, dwc->gadget.speed);
+ /* Recent versions support automatic phy suspend and don't need this */
+ if (dwc->revision < DWC3_REVISION_194A) {
+ /* Suspend unneeded PHY */
+ dwc3_gadget_phy_suspend(dwc, dwc->gadget.speed);
+ }
dep = dwc->eps[0];
ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL);
@@ -2373,10 +2428,6 @@ int __devinit dwc3_gadget_init(struct dwc3 *dwc)
reg |= DWC3_DCFG_LPM_CAP;
dwc3_writel(dwc->regs, DWC3_DCFG, reg);
- reg = dwc3_readl(dwc->regs, DWC3_DCTL);
- reg |= DWC3_DCTL_ACCEPTU1ENA | DWC3_DCTL_ACCEPTU2ENA;
- dwc3_writel(dwc->regs, DWC3_DCTL, reg);
-
/* Enable all but Start and End of Frame IRQs */
reg = (DWC3_DEVTEN_VNDRDEVTSTRCVEDEN |
DWC3_DEVTEN_EVNTOVERFLOWEN |
@@ -2389,6 +2440,24 @@ int __devinit dwc3_gadget_init(struct dwc3 *dwc)
DWC3_DEVTEN_DISCONNEVTEN);
dwc3_writel(dwc->regs, DWC3_DEVTEN, reg);
+ /* Enable USB2 LPM and automatic phy suspend only on recent versions */
+ if (dwc->revision >= DWC3_REVISION_194A) {
+ reg = dwc3_readl(dwc->regs, DWC3_DCFG);
+ reg |= DWC3_DCFG_LPM_CAP;
+ dwc3_writel(dwc->regs, DWC3_DCFG, reg);
+
+ reg = dwc3_readl(dwc->regs, DWC3_DCTL);
+ reg &= ~(DWC3_DCTL_HIRD_THRES_MASK | DWC3_DCTL_L1_HIBER_EN);
+
+ /* TODO: This should be configurable */
+ reg |= DWC3_DCTL_HIRD_THRES(28);
+
+ dwc3_writel(dwc->regs, DWC3_DCTL, reg);
+
+ dwc3_gadget_usb2_phy_suspend(dwc, false);
+ dwc3_gadget_usb3_phy_suspend(dwc, false);
+ }
+
ret = device_register(&dwc->gadget.dev);
if (ret) {
dev_err(dwc->dev, "failed to register gadget device\n");
diff --git a/drivers/usb/dwc3/gadget.h b/drivers/usb/dwc3/gadget.h
index 95ef6a2f776..99e6d724882 100644
--- a/drivers/usb/dwc3/gadget.h
+++ b/drivers/usb/dwc3/gadget.h
@@ -66,7 +66,12 @@ struct dwc3;
#define DWC3_DEPCFG_FIFO_NUMBER(n) ((n) << 17)
#define DWC3_DEPCFG_BURST_SIZE(n) ((n) << 22)
#define DWC3_DEPCFG_DATA_SEQ_NUM(n) ((n) << 26)
+/* This applies for core versions earlier than 1.94a */
#define DWC3_DEPCFG_IGN_SEQ_NUM (1 << 31)
+/* These apply for core versions 1.94a and later */
+#define DWC3_DEPCFG_ACTION_INIT (0 << 30)
+#define DWC3_DEPCFG_ACTION_RESTORE (1 << 30)
+#define DWC3_DEPCFG_ACTION_MODIFY (2 << 30)
/* DEPXFERCFG parameter 0 */
#define DWC3_DEPXFERCFG_NUM_XFER_RES(n) ((n) & 0xffff)
@@ -106,6 +111,7 @@ int dwc3_gadget_set_link_state(struct dwc3 *dwc, enum dwc3_link_state state);
void dwc3_ep0_interrupt(struct dwc3 *dwc,
const struct dwc3_event_depevt *event);
void dwc3_ep0_out_start(struct dwc3 *dwc);
+int dwc3_gadget_ep0_set_halt(struct usb_ep *ep, int value);
int dwc3_gadget_ep0_queue(struct usb_ep *ep, struct usb_request *request,
gfp_t gfp_flags);
int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value);
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-25 20:54:49 +0000