diff options
Diffstat (limited to 'drivers/usb/gadget/lh7a40x_udc.h')
| -rw-r--r-- | drivers/usb/gadget/lh7a40x_udc.h | 259 |
1 files changed, 0 insertions, 259 deletions
diff --git a/drivers/usb/gadget/lh7a40x_udc.h b/drivers/usb/gadget/lh7a40x_udc.h deleted file mode 100644 index ca861203a30..00000000000 --- a/drivers/usb/gadget/lh7a40x_udc.h +++ /dev/null @@ -1,259 +0,0 @@ -/* - * linux/drivers/usb/gadget/lh7a40x_udc.h - * Sharp LH7A40x on-chip full speed USB device controllers - * - * Copyright (C) 2004 Mikko Lahteenmaki, Nordic ID - * Copyright (C) 2004 Bo Henriksen, Nordic ID - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#ifndef __LH7A40X_H_ -#define __LH7A40X_H_ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/ioport.h> -#include <linux/types.h> -#include <linux/errno.h> -#include <linux/delay.h> -#include <linux/sched.h> -#include <linux/slab.h> -#include <linux/init.h> -#include <linux/timer.h> -#include <linux/list.h> -#include <linux/interrupt.h> -#include <linux/proc_fs.h> -#include <linux/mm.h> -#include <linux/device.h> -#include <linux/dma-mapping.h> - -#include <asm/byteorder.h> -#include <asm/dma.h> -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/system.h> -#include <asm/unaligned.h> -#include <mach/hardware.h> - -#include <linux/usb/ch9.h> -#include <linux/usb/gadget.h> - -/* - * Memory map - */ - -#define USB_FA 0x80000200 // function address register -#define USB_PM 0x80000204 // power management register - -#define USB_IN_INT 0x80000208 // IN interrupt register bank (EP0-EP3) -#define USB_OUT_INT 0x80000210 // OUT interrupt register bank (EP2) -#define USB_INT 0x80000218 // interrupt register bank - -#define USB_IN_INT_EN 0x8000021C // IN interrupt enable register bank -#define USB_OUT_INT_EN 0x80000224 // OUT interrupt enable register bank -#define USB_INT_EN 0x8000022C // USB interrupt enable register bank - -#define USB_FRM_NUM1 0x80000230 // Frame number1 register -#define USB_FRM_NUM2 0x80000234 // Frame number2 register -#define USB_INDEX 0x80000238 // index register - -#define USB_IN_MAXP 0x80000240 // IN MAXP register -#define USB_IN_CSR1 0x80000244 // IN CSR1 register/EP0 CSR register -#define USB_EP0_CSR 0x80000244 // IN CSR1 register/EP0 CSR register -#define USB_IN_CSR2 0x80000248 // IN CSR2 register -#define USB_OUT_MAXP 0x8000024C // OUT MAXP register - -#define USB_OUT_CSR1 0x80000250 // OUT CSR1 register -#define USB_OUT_CSR2 0x80000254 // OUT CSR2 register -#define USB_OUT_FIFO_WC1 0x80000258 // OUT FIFO write count1 register -#define USB_OUT_FIFO_WC2 0x8000025C // OUT FIFO write count2 register - -#define USB_RESET 0x8000044C // USB reset register - -#define USB_EP0_FIFO 0x80000280 -#define USB_EP1_FIFO 0x80000284 -#define USB_EP2_FIFO 0x80000288 -#define USB_EP3_FIFO 0x8000028c - -/* - * USB reset register - */ -#define USB_RESET_APB (1<<1) //resets USB APB control side WRITE -#define USB_RESET_IO (1<<0) //resets USB IO side WRITE - -/* - * USB function address register - */ -#define USB_FA_ADDR_UPDATE (1<<7) -#define USB_FA_FUNCTION_ADDR (0x7F) - -/* - * Power Management register - */ -#define PM_USB_DCP (1<<5) -#define PM_USB_ENABLE (1<<4) -#define PM_USB_RESET (1<<3) -#define PM_UC_RESUME (1<<2) -#define PM_SUSPEND_MODE (1<<1) -#define PM_ENABLE_SUSPEND (1<<0) - -/* - * IN interrupt register - */ -#define USB_IN_INT_EP3 (1<<3) -#define USB_IN_INT_EP1 (1<<1) -#define USB_IN_INT_EP0 (1<<0) - -/* - * OUT interrupt register - */ -#define USB_OUT_INT_EP2 (1<<2) - -/* - * USB interrupt register - */ -#define USB_INT_RESET_INT (1<<2) -#define USB_INT_RESUME_INT (1<<1) -#define USB_INT_SUSPEND_INT (1<<0) - -/* - * USB interrupt enable register - */ -#define USB_INT_EN_USB_RESET_INTER (1<<2) -#define USB_INT_EN_RESUME_INTER (1<<1) -#define USB_INT_EN_SUSPEND_INTER (1<<0) - -/* - * INCSR1 register - */ -#define USB_IN_CSR1_CLR_DATA_TOGGLE (1<<6) -#define USB_IN_CSR1_SENT_STALL (1<<5) -#define USB_IN_CSR1_SEND_STALL (1<<4) -#define USB_IN_CSR1_FIFO_FLUSH (1<<3) -#define USB_IN_CSR1_FIFO_NOT_EMPTY (1<<1) -#define USB_IN_CSR1_IN_PKT_RDY (1<<0) - -/* - * INCSR2 register - */ -#define USB_IN_CSR2_AUTO_SET (1<<7) -#define USB_IN_CSR2_USB_DMA_EN (1<<4) - -/* - * OUT CSR1 register - */ -#define USB_OUT_CSR1_CLR_DATA_REG (1<<7) -#define USB_OUT_CSR1_SENT_STALL (1<<6) -#define USB_OUT_CSR1_SEND_STALL (1<<5) -#define USB_OUT_CSR1_FIFO_FLUSH (1<<4) -#define USB_OUT_CSR1_FIFO_FULL (1<<1) -#define USB_OUT_CSR1_OUT_PKT_RDY (1<<0) - -/* - * OUT CSR2 register - */ -#define USB_OUT_CSR2_AUTO_CLR (1<<7) -#define USB_OUT_CSR2_USB_DMA_EN (1<<4) - -/* - * EP0 CSR - */ -#define EP0_CLR_SETUP_END (1<<7) /* Clear "Setup Ends" Bit (w) */ -#define EP0_CLR_OUT (1<<6) /* Clear "Out packet ready" Bit (w) */ -#define EP0_SEND_STALL (1<<5) /* Send STALL Handshake (rw) */ -#define EP0_SETUP_END (1<<4) /* Setup Ends (r) */ - -#define EP0_DATA_END (1<<3) /* Data end (rw) */ -#define EP0_SENT_STALL (1<<2) /* Sent Stall Handshake (r) */ -#define EP0_IN_PKT_RDY (1<<1) /* In packet ready (rw) */ -#define EP0_OUT_PKT_RDY (1<<0) /* Out packet ready (r) */ - -/* general CSR */ -#define OUT_PKT_RDY (1<<0) -#define IN_PKT_RDY (1<<0) - -/* - * IN/OUT MAXP register - */ -#define USB_OUT_MAXP_MAXP (0xF) -#define USB_IN_MAXP_MAXP (0xF) - -// Max packet size -//#define EP0_PACKETSIZE 0x10 -#define EP0_PACKETSIZE 0x8 -#define EP0_MAXPACKETSIZE 0x10 - -#define UDC_MAX_ENDPOINTS 4 - -#define WAIT_FOR_SETUP 0 -#define DATA_STATE_XMIT 1 -#define DATA_STATE_NEED_ZLP 2 -#define WAIT_FOR_OUT_STATUS 3 -#define DATA_STATE_RECV 4 - -/* ********************************************************************************************* */ -/* IO - */ - -typedef enum ep_type { - ep_control, ep_bulk_in, ep_bulk_out, ep_interrupt -} ep_type_t; - -struct lh7a40x_ep { - struct usb_ep ep; - struct lh7a40x_udc *dev; - - const struct usb_endpoint_descriptor *desc; - struct list_head queue; - unsigned long pio_irqs; - - u8 stopped; - u8 bEndpointAddress; - u8 bmAttributes; - - ep_type_t ep_type; - u32 fifo; - u32 csr1; - u32 csr2; -}; - -struct lh7a40x_request { - struct usb_request req; - struct list_head queue; -}; - -struct lh7a40x_udc { - struct usb_gadget gadget; - struct usb_gadget_driver *driver; - struct device *dev; - spinlock_t lock; - - int ep0state; - struct lh7a40x_ep ep[UDC_MAX_ENDPOINTS]; - - unsigned char usb_address; - - unsigned req_pending:1, req_std:1, req_config:1; -}; - -extern struct lh7a40x_udc *the_controller; - -#define ep_is_in(EP) (((EP)->bEndpointAddress&USB_DIR_IN)==USB_DIR_IN) -#define ep_index(EP) ((EP)->bEndpointAddress&0xF) -#define ep_maxpacket(EP) ((EP)->ep.maxpacket) - -#endif |