summaryrefslogtreecommitdiffstats
path: root/drivers/usb/gadget/mv_u3d.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/gadget/mv_u3d.h')
-rw-r--r--drivers/usb/gadget/mv_u3d.h320
1 files changed, 320 insertions, 0 deletions
diff --git a/drivers/usb/gadget/mv_u3d.h b/drivers/usb/gadget/mv_u3d.h
new file mode 100644
index 00000000000..e32a787ac37
--- /dev/null
+++ b/drivers/usb/gadget/mv_u3d.h
@@ -0,0 +1,320 @@
+/*
+ * Copyright (C) 2011 Marvell International Ltd. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ */
+
+#ifndef __MV_U3D_H
+#define __MV_U3D_H
+
+#define MV_U3D_EP_CONTEXT_ALIGNMENT 32
+#define MV_U3D_TRB_ALIGNMENT 16
+#define MV_U3D_DMA_BOUNDARY 4096
+#define MV_U3D_EP0_MAX_PKT_SIZE 512
+
+/* ep0 transfer state */
+#define MV_U3D_WAIT_FOR_SETUP 0
+#define MV_U3D_DATA_STATE_XMIT 1
+#define MV_U3D_DATA_STATE_NEED_ZLP 2
+#define MV_U3D_WAIT_FOR_OUT_STATUS 3
+#define MV_U3D_DATA_STATE_RECV 4
+#define MV_U3D_STATUS_STAGE 5
+
+#define MV_U3D_EP_MAX_LENGTH_TRANSFER 0x10000
+
+/* USB3 Interrupt Status */
+#define MV_U3D_USBINT_SETUP 0x00000001
+#define MV_U3D_USBINT_RX_COMPLETE 0x00000002
+#define MV_U3D_USBINT_TX_COMPLETE 0x00000004
+#define MV_U3D_USBINT_UNDER_RUN 0x00000008
+#define MV_U3D_USBINT_RXDESC_ERR 0x00000010
+#define MV_U3D_USBINT_TXDESC_ERR 0x00000020
+#define MV_U3D_USBINT_RX_TRB_COMPLETE 0x00000040
+#define MV_U3D_USBINT_TX_TRB_COMPLETE 0x00000080
+#define MV_U3D_USBINT_VBUS_VALID 0x00010000
+#define MV_U3D_USBINT_STORAGE_CMD_FULL 0x00020000
+#define MV_U3D_USBINT_LINK_CHG 0x01000000
+
+/* USB3 Interrupt Enable */
+#define MV_U3D_INTR_ENABLE_SETUP 0x00000001
+#define MV_U3D_INTR_ENABLE_RX_COMPLETE 0x00000002
+#define MV_U3D_INTR_ENABLE_TX_COMPLETE 0x00000004
+#define MV_U3D_INTR_ENABLE_UNDER_RUN 0x00000008
+#define MV_U3D_INTR_ENABLE_RXDESC_ERR 0x00000010
+#define MV_U3D_INTR_ENABLE_TXDESC_ERR 0x00000020
+#define MV_U3D_INTR_ENABLE_RX_TRB_COMPLETE 0x00000040
+#define MV_U3D_INTR_ENABLE_TX_TRB_COMPLETE 0x00000080
+#define MV_U3D_INTR_ENABLE_RX_BUFFER_ERR 0x00000100
+#define MV_U3D_INTR_ENABLE_VBUS_VALID 0x00010000
+#define MV_U3D_INTR_ENABLE_STORAGE_CMD_FULL 0x00020000
+#define MV_U3D_INTR_ENABLE_LINK_CHG 0x01000000
+#define MV_U3D_INTR_ENABLE_PRIME_STATUS 0x02000000
+
+/* USB3 Link Change */
+#define MV_U3D_LINK_CHANGE_LINK_UP 0x00000001
+#define MV_U3D_LINK_CHANGE_SUSPEND 0x00000002
+#define MV_U3D_LINK_CHANGE_RESUME 0x00000004
+#define MV_U3D_LINK_CHANGE_WRESET 0x00000008
+#define MV_U3D_LINK_CHANGE_HRESET 0x00000010
+#define MV_U3D_LINK_CHANGE_VBUS_INVALID 0x00000020
+#define MV_U3D_LINK_CHANGE_INACT 0x00000040
+#define MV_U3D_LINK_CHANGE_DISABLE_AFTER_U0 0x00000080
+#define MV_U3D_LINK_CHANGE_U1 0x00000100
+#define MV_U3D_LINK_CHANGE_U2 0x00000200
+#define MV_U3D_LINK_CHANGE_U3 0x00000400
+
+/* bridge setting */
+#define MV_U3D_BRIDGE_SETTING_VBUS_VALID (1 << 16)
+
+/* Command Register Bit Masks */
+#define MV_U3D_CMD_RUN_STOP 0x00000001
+#define MV_U3D_CMD_CTRL_RESET 0x00000002
+
+/* ep control register */
+#define MV_U3D_EPXCR_EP_TYPE_CONTROL 0
+#define MV_U3D_EPXCR_EP_TYPE_ISOC 1
+#define MV_U3D_EPXCR_EP_TYPE_BULK 2
+#define MV_U3D_EPXCR_EP_TYPE_INT 3
+#define MV_U3D_EPXCR_EP_ENABLE_SHIFT 4
+#define MV_U3D_EPXCR_MAX_BURST_SIZE_SHIFT 12
+#define MV_U3D_EPXCR_MAX_PACKET_SIZE_SHIFT 16
+#define MV_U3D_USB_BULK_BURST_OUT 6
+#define MV_U3D_USB_BULK_BURST_IN 14
+
+#define MV_U3D_EPXCR_EP_FLUSH (1 << 7)
+#define MV_U3D_EPXCR_EP_HALT (1 << 1)
+#define MV_U3D_EPXCR_EP_INIT (1)
+
+/* TX/RX Status Register */
+#define MV_U3D_XFERSTATUS_COMPLETE_SHIFT 24
+#define MV_U3D_COMPLETE_INVALID 0
+#define MV_U3D_COMPLETE_SUCCESS 1
+#define MV_U3D_COMPLETE_BUFF_ERR 2
+#define MV_U3D_COMPLETE_SHORT_PACKET 3
+#define MV_U3D_COMPLETE_TRB_ERR 5
+#define MV_U3D_XFERSTATUS_TRB_LENGTH_MASK (0xFFFFFF)
+
+#define MV_U3D_USB_LINK_BYPASS_VBUS 0x8
+
+#define MV_U3D_LTSSM_PHY_INIT_DONE 0x80000000
+#define MV_U3D_LTSSM_NEVER_GO_COMPLIANCE 0x40000000
+
+#define MV_U3D_USB3_OP_REGS_OFFSET 0x100
+#define MV_U3D_USB3_PHY_OFFSET 0xB800
+
+#define DCS_ENABLE 0x1
+
+/* timeout */
+#define MV_U3D_RESET_TIMEOUT 10000
+#define MV_U3D_FLUSH_TIMEOUT 100000
+#define MV_U3D_OWN_TIMEOUT 10000
+#define LOOPS_USEC_SHIFT 4
+#define LOOPS_USEC (1 << LOOPS_USEC_SHIFT)
+#define LOOPS(timeout) ((timeout) >> LOOPS_USEC_SHIFT)
+
+/* ep direction */
+#define MV_U3D_EP_DIR_IN 1
+#define MV_U3D_EP_DIR_OUT 0
+#define mv_u3d_ep_dir(ep) (((ep)->ep_num == 0) ? \
+ ((ep)->u3d->ep0_dir) : ((ep)->direction))
+
+/* usb capability registers */
+struct mv_u3d_cap_regs {
+ u32 rsvd[5];
+ u32 dboff; /* doorbell register offset */
+ u32 rtsoff; /* runtime register offset */
+ u32 vuoff; /* vendor unique register offset */
+};
+
+/* operation registers */
+struct mv_u3d_op_regs {
+ u32 usbcmd; /* Command register */
+ u32 rsvd1[11];
+ u32 dcbaapl; /* Device Context Base Address low register */
+ u32 dcbaaph; /* Device Context Base Address high register */
+ u32 rsvd2[243];
+ u32 portsc; /* port status and control register*/
+ u32 portlinkinfo; /* port link info register*/
+ u32 rsvd3[9917];
+ u32 doorbell; /* doorbell register */
+};
+
+/* control enpoint enable registers */
+struct epxcr {
+ u32 epxoutcr0; /* ep out control 0 register */
+ u32 epxoutcr1; /* ep out control 1 register */
+ u32 epxincr0; /* ep in control 0 register */
+ u32 epxincr1; /* ep in control 1 register */
+};
+
+/* transfer status registers */
+struct xferstatus {
+ u32 curdeqlo; /* current TRB pointer low */
+ u32 curdeqhi; /* current TRB pointer high */
+ u32 statuslo; /* transfer status low */
+ u32 statushi; /* transfer status high */
+};
+
+/* vendor unique control registers */
+struct mv_u3d_vuc_regs {
+ u32 ctrlepenable; /* control endpoint enable register */
+ u32 setuplock; /* setup lock register */
+ u32 endcomplete; /* endpoint transfer complete register */
+ u32 intrcause; /* interrupt cause register */
+ u32 intrenable; /* interrupt enable register */
+ u32 trbcomplete; /* TRB complete register */
+ u32 linkchange; /* link change register */
+ u32 rsvd1[5];
+ u32 trbunderrun; /* TRB underrun register */
+ u32 rsvd2[43];
+ u32 bridgesetting; /* bridge setting register */
+ u32 rsvd3[7];
+ struct xferstatus txst[16]; /* TX status register */
+ struct xferstatus rxst[16]; /* RX status register */
+ u32 ltssm; /* LTSSM control register */
+ u32 pipe; /* PIPE control register */
+ u32 linkcr0; /* link control 0 register */
+ u32 linkcr1; /* link control 1 register */
+ u32 rsvd6[60];
+ u32 mib0; /* MIB0 counter register */
+ u32 usblink; /* usb link control register */
+ u32 ltssmstate; /* LTSSM state register */
+ u32 linkerrorcause; /* link error cause register */
+ u32 rsvd7[60];
+ u32 devaddrtiebrkr; /* device address and tie breaker */
+ u32 itpinfo0; /* ITP info 0 register */
+ u32 itpinfo1; /* ITP info 1 register */
+ u32 rsvd8[61];
+ struct epxcr epcr[16]; /* ep control register */
+ u32 rsvd9[64];
+ u32 phyaddr; /* PHY address register */
+ u32 phydata; /* PHY data register */
+};
+
+/* Endpoint context structure */
+struct mv_u3d_ep_context {
+ u32 rsvd0;
+ u32 rsvd1;
+ u32 trb_addr_lo; /* TRB address low 32 bit */
+ u32 trb_addr_hi; /* TRB address high 32 bit */
+ u32 rsvd2;
+ u32 rsvd3;
+ struct usb_ctrlrequest setup_buffer; /* setup data buffer */
+};
+
+/* TRB control data structure */
+struct mv_u3d_trb_ctrl {
+ u32 own:1; /* owner of TRB */
+ u32 rsvd1:3;
+ u32 chain:1; /* associate this TRB with the
+ next TRB on the Ring */
+ u32 ioc:1; /* interrupt on complete */
+ u32 rsvd2:4;
+ u32 type:6; /* TRB type */
+#define TYPE_NORMAL 1
+#define TYPE_DATA 3
+#define TYPE_LINK 6
+ u32 dir:1; /* Working at data stage of control endpoint
+ operation. 0 is OUT and 1 is IN. */
+ u32 rsvd3:15;
+};
+
+/* TRB data structure
+ * For multiple TRB, all the TRBs' physical address should be continuous.
+ */
+struct mv_u3d_trb_hw {
+ u32 buf_addr_lo; /* data buffer address low 32 bit */
+ u32 buf_addr_hi; /* data buffer address high 32 bit */
+ u32 trb_len; /* transfer length */
+ struct mv_u3d_trb_ctrl ctrl; /* TRB control data */
+};
+
+/* TRB structure */
+struct mv_u3d_trb {
+ struct mv_u3d_trb_hw *trb_hw; /* point to the trb_hw structure */
+ dma_addr_t trb_dma; /* dma address for this trb_hw */
+ struct list_head trb_list; /* trb list */
+};
+
+/* device data structure */
+struct mv_u3d {
+ struct usb_gadget gadget;
+ struct usb_gadget_driver *driver;
+ spinlock_t lock; /* device lock */
+ struct completion *done;
+ struct device *dev;
+ int irq;
+
+ /* usb controller registers */
+ struct mv_u3d_cap_regs __iomem *cap_regs;
+ struct mv_u3d_op_regs __iomem *op_regs;
+ struct mv_u3d_vuc_regs __iomem *vuc_regs;
+ void __iomem *phy_regs;
+
+ unsigned int max_eps;
+ struct mv_u3d_ep_context *ep_context;
+ size_t ep_context_size;
+ dma_addr_t ep_context_dma;
+
+ struct dma_pool *trb_pool; /* for TRB data structure */
+ struct mv_u3d_ep *eps;
+
+ struct mv_u3d_req *status_req; /* ep0 status request */
+ struct usb_ctrlrequest local_setup_buff; /* store setup data*/
+
+ unsigned int resume_state; /* USB state to resume */
+ unsigned int usb_state; /* USB current state */
+ unsigned int ep0_state; /* Endpoint zero state */
+ unsigned int ep0_dir;
+
+ unsigned int dev_addr; /* device address */
+
+ unsigned int errors;
+
+ unsigned softconnect:1;
+ unsigned vbus_active:1; /* vbus is active or not */
+ unsigned remote_wakeup:1; /* support remote wakeup */
+ unsigned clock_gating:1; /* clock gating or not */
+ unsigned active:1; /* udc is active or not */
+ unsigned vbus_valid_detect:1; /* udc vbus detection */
+
+ struct mv_usb_addon_irq *vbus;
+ unsigned int power;
+
+ struct clk *clk;
+};
+
+/* endpoint data structure */
+struct mv_u3d_ep {
+ struct usb_ep ep;
+ struct mv_u3d *u3d;
+ struct list_head queue; /* ep request queued hardware */
+ struct list_head req_list; /* list of ep request */
+ struct mv_u3d_ep_context *ep_context; /* ep context */
+ u32 direction;
+ char name[14];
+ u32 processing; /* there is ep request
+ queued on haredware */
+ spinlock_t req_lock; /* ep lock */
+ unsigned wedge:1;
+ unsigned enabled:1;
+ unsigned ep_type:2;
+ unsigned ep_num:8;
+};
+
+/* request data structure */
+struct mv_u3d_req {
+ struct usb_request req;
+ struct mv_u3d_ep *ep;
+ struct list_head queue; /* ep requst queued on hardware */
+ struct list_head list; /* ep request list */
+ struct list_head trb_list; /* trb list of a request */
+
+ struct mv_u3d_trb *trb_head; /* point to first trb of a request */
+ unsigned trb_count; /* TRB number in the chain */
+ unsigned chain; /* TRB chain or not */
+};
+
+#endif