summaryrefslogtreecommitdiffstats
path: root/drivers/usb/gadget/pch_udc.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/gadget/pch_udc.c')
-rw-r--r--drivers/usb/gadget/pch_udc.c2947
1 files changed, 2947 insertions, 0 deletions
diff --git a/drivers/usb/gadget/pch_udc.c b/drivers/usb/gadget/pch_udc.c
new file mode 100644
index 00000000000..0c8dd81dddc
--- /dev/null
+++ b/drivers/usb/gadget/pch_udc.c
@@ -0,0 +1,2947 @@
+/*
+ * Copyright (C) 2010 OKI SEMICONDUCTOR CO., LTD.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ */
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+
+/* Address offset of Registers */
+#define UDC_EP_REG_SHIFT 0x20 /* Offset to next EP */
+
+#define UDC_EPCTL_ADDR 0x00 /* Endpoint control */
+#define UDC_EPSTS_ADDR 0x04 /* Endpoint status */
+#define UDC_BUFIN_FRAMENUM_ADDR 0x08 /* buffer size in / frame number out */
+#define UDC_BUFOUT_MAXPKT_ADDR 0x0C /* buffer size out / maxpkt in */
+#define UDC_SUBPTR_ADDR 0x10 /* setup buffer pointer */
+#define UDC_DESPTR_ADDR 0x14 /* Data descriptor pointer */
+#define UDC_CONFIRM_ADDR 0x18 /* Write/Read confirmation */
+
+#define UDC_DEVCFG_ADDR 0x400 /* Device configuration */
+#define UDC_DEVCTL_ADDR 0x404 /* Device control */
+#define UDC_DEVSTS_ADDR 0x408 /* Device status */
+#define UDC_DEVIRQSTS_ADDR 0x40C /* Device irq status */
+#define UDC_DEVIRQMSK_ADDR 0x410 /* Device irq mask */
+#define UDC_EPIRQSTS_ADDR 0x414 /* Endpoint irq status */
+#define UDC_EPIRQMSK_ADDR 0x418 /* Endpoint irq mask */
+#define UDC_DEVLPM_ADDR 0x41C /* LPM control / status */
+#define UDC_CSR_BUSY_ADDR 0x4f0 /* UDC_CSR_BUSY Status register */
+#define UDC_SRST_ADDR 0x4fc /* SOFT RESET register */
+#define UDC_CSR_ADDR 0x500 /* USB_DEVICE endpoint register */
+
+/* Endpoint control register */
+/* Bit position */
+#define UDC_EPCTL_MRXFLUSH (1 << 12)
+#define UDC_EPCTL_RRDY (1 << 9)
+#define UDC_EPCTL_CNAK (1 << 8)
+#define UDC_EPCTL_SNAK (1 << 7)
+#define UDC_EPCTL_NAK (1 << 6)
+#define UDC_EPCTL_P (1 << 3)
+#define UDC_EPCTL_F (1 << 1)
+#define UDC_EPCTL_S (1 << 0)
+#define UDC_EPCTL_ET_SHIFT 4
+/* Mask patern */
+#define UDC_EPCTL_ET_MASK 0x00000030
+/* Value for ET field */
+#define UDC_EPCTL_ET_CONTROL 0
+#define UDC_EPCTL_ET_ISO 1
+#define UDC_EPCTL_ET_BULK 2
+#define UDC_EPCTL_ET_INTERRUPT 3
+
+/* Endpoint status register */
+/* Bit position */
+#define UDC_EPSTS_XFERDONE (1 << 27)
+#define UDC_EPSTS_RSS (1 << 26)
+#define UDC_EPSTS_RCS (1 << 25)
+#define UDC_EPSTS_TXEMPTY (1 << 24)
+#define UDC_EPSTS_TDC (1 << 10)
+#define UDC_EPSTS_HE (1 << 9)
+#define UDC_EPSTS_MRXFIFO_EMP (1 << 8)
+#define UDC_EPSTS_BNA (1 << 7)
+#define UDC_EPSTS_IN (1 << 6)
+#define UDC_EPSTS_OUT_SHIFT 4
+/* Mask patern */
+#define UDC_EPSTS_OUT_MASK 0x00000030
+#define UDC_EPSTS_ALL_CLR_MASK 0x1F0006F0
+/* Value for OUT field */
+#define UDC_EPSTS_OUT_SETUP 2
+#define UDC_EPSTS_OUT_DATA 1
+
+/* Device configuration register */
+/* Bit position */
+#define UDC_DEVCFG_CSR_PRG (1 << 17)
+#define UDC_DEVCFG_SP (1 << 3)
+/* SPD Valee */
+#define UDC_DEVCFG_SPD_HS 0x0
+#define UDC_DEVCFG_SPD_FS 0x1
+#define UDC_DEVCFG_SPD_LS 0x2
+
+/* Device control register */
+/* Bit position */
+#define UDC_DEVCTL_THLEN_SHIFT 24
+#define UDC_DEVCTL_BRLEN_SHIFT 16
+#define UDC_DEVCTL_CSR_DONE (1 << 13)
+#define UDC_DEVCTL_SD (1 << 10)
+#define UDC_DEVCTL_MODE (1 << 9)
+#define UDC_DEVCTL_BREN (1 << 8)
+#define UDC_DEVCTL_THE (1 << 7)
+#define UDC_DEVCTL_DU (1 << 4)
+#define UDC_DEVCTL_TDE (1 << 3)
+#define UDC_DEVCTL_RDE (1 << 2)
+#define UDC_DEVCTL_RES (1 << 0)
+
+/* Device status register */
+/* Bit position */
+#define UDC_DEVSTS_TS_SHIFT 18
+#define UDC_DEVSTS_ENUM_SPEED_SHIFT 13
+#define UDC_DEVSTS_ALT_SHIFT 8
+#define UDC_DEVSTS_INTF_SHIFT 4
+#define UDC_DEVSTS_CFG_SHIFT 0
+/* Mask patern */
+#define UDC_DEVSTS_TS_MASK 0xfffc0000
+#define UDC_DEVSTS_ENUM_SPEED_MASK 0x00006000
+#define UDC_DEVSTS_ALT_MASK 0x00000f00
+#define UDC_DEVSTS_INTF_MASK 0x000000f0
+#define UDC_DEVSTS_CFG_MASK 0x0000000f
+/* value for maximum speed for SPEED field */
+#define UDC_DEVSTS_ENUM_SPEED_FULL 1
+#define UDC_DEVSTS_ENUM_SPEED_HIGH 0
+#define UDC_DEVSTS_ENUM_SPEED_LOW 2
+#define UDC_DEVSTS_ENUM_SPEED_FULLX 3
+
+/* Device irq register */
+/* Bit position */
+#define UDC_DEVINT_RWKP (1 << 7)
+#define UDC_DEVINT_ENUM (1 << 6)
+#define UDC_DEVINT_SOF (1 << 5)
+#define UDC_DEVINT_US (1 << 4)
+#define UDC_DEVINT_UR (1 << 3)
+#define UDC_DEVINT_ES (1 << 2)
+#define UDC_DEVINT_SI (1 << 1)
+#define UDC_DEVINT_SC (1 << 0)
+/* Mask patern */
+#define UDC_DEVINT_MSK 0x7f
+
+/* Endpoint irq register */
+/* Bit position */
+#define UDC_EPINT_IN_SHIFT 0
+#define UDC_EPINT_OUT_SHIFT 16
+#define UDC_EPINT_IN_EP0 (1 << 0)
+#define UDC_EPINT_OUT_EP0 (1 << 16)
+/* Mask patern */
+#define UDC_EPINT_MSK_DISABLE_ALL 0xffffffff
+
+/* UDC_CSR_BUSY Status register */
+/* Bit position */
+#define UDC_CSR_BUSY (1 << 0)
+
+/* SOFT RESET register */
+/* Bit position */
+#define UDC_PSRST (1 << 1)
+#define UDC_SRST (1 << 0)
+
+/* USB_DEVICE endpoint register */
+/* Bit position */
+#define UDC_CSR_NE_NUM_SHIFT 0
+#define UDC_CSR_NE_DIR_SHIFT 4
+#define UDC_CSR_NE_TYPE_SHIFT 5
+#define UDC_CSR_NE_CFG_SHIFT 7
+#define UDC_CSR_NE_INTF_SHIFT 11
+#define UDC_CSR_NE_ALT_SHIFT 15
+#define UDC_CSR_NE_MAX_PKT_SHIFT 19
+/* Mask patern */
+#define UDC_CSR_NE_NUM_MASK 0x0000000f
+#define UDC_CSR_NE_DIR_MASK 0x00000010
+#define UDC_CSR_NE_TYPE_MASK 0x00000060
+#define UDC_CSR_NE_CFG_MASK 0x00000780
+#define UDC_CSR_NE_INTF_MASK 0x00007800
+#define UDC_CSR_NE_ALT_MASK 0x00078000
+#define UDC_CSR_NE_MAX_PKT_MASK 0x3ff80000
+
+#define PCH_UDC_CSR(ep) (UDC_CSR_ADDR + ep*4)
+#define PCH_UDC_EPINT(in, num)\
+ (1 << (num + (in ? UDC_EPINT_IN_SHIFT : UDC_EPINT_OUT_SHIFT)))
+
+/* Index of endpoint */
+#define UDC_EP0IN_IDX 0
+#define UDC_EP0OUT_IDX 1
+#define UDC_EPIN_IDX(ep) (ep * 2)
+#define UDC_EPOUT_IDX(ep) (ep * 2 + 1)
+#define PCH_UDC_EP0 0
+#define PCH_UDC_EP1 1
+#define PCH_UDC_EP2 2
+#define PCH_UDC_EP3 3
+
+/* Number of endpoint */
+#define PCH_UDC_EP_NUM 32 /* Total number of EPs (16 IN,16 OUT) */
+#define PCH_UDC_USED_EP_NUM 4 /* EP number of EP's really used */
+/* Length Value */
+#define PCH_UDC_BRLEN 0x0F /* Burst length */
+#define PCH_UDC_THLEN 0x1F /* Threshold length */
+/* Value of EP Buffer Size */
+#define UDC_EP0IN_BUFF_SIZE 64
+#define UDC_EPIN_BUFF_SIZE 512
+#define UDC_EP0OUT_BUFF_SIZE 64
+#define UDC_EPOUT_BUFF_SIZE 512
+/* Value of EP maximum packet size */
+#define UDC_EP0IN_MAX_PKT_SIZE 64
+#define UDC_EP0OUT_MAX_PKT_SIZE 64
+#define UDC_BULK_MAX_PKT_SIZE 512
+
+/* DMA */
+#define DMA_DIR_RX 1 /* DMA for data receive */
+#define DMA_DIR_TX 2 /* DMA for data transmit */
+#define DMA_ADDR_INVALID (~(dma_addr_t)0)
+#define UDC_DMA_MAXPACKET 65536 /* maximum packet size for DMA */
+
+/**
+ * struct pch_udc_data_dma_desc - Structure to hold DMA descriptor information
+ * for data
+ * @status: Status quadlet
+ * @reserved: Reserved
+ * @dataptr: Buffer descriptor
+ * @next: Next descriptor
+ */
+struct pch_udc_data_dma_desc {
+ u32 status;
+ u32 reserved;
+ u32 dataptr;
+ u32 next;
+};
+
+/**
+ * struct pch_udc_stp_dma_desc - Structure to hold DMA descriptor information
+ * for control data
+ * @status: Status
+ * @reserved: Reserved
+ * @data12: First setup word
+ * @data34: Second setup word
+ */
+struct pch_udc_stp_dma_desc {
+ u32 status;
+ u32 reserved;
+ struct usb_ctrlrequest request;
+} __attribute((packed));
+
+/* DMA status definitions */
+/* Buffer status */
+#define PCH_UDC_BUFF_STS 0xC0000000
+#define PCH_UDC_BS_HST_RDY 0x00000000
+#define PCH_UDC_BS_DMA_BSY 0x40000000
+#define PCH_UDC_BS_DMA_DONE 0x80000000
+#define PCH_UDC_BS_HST_BSY 0xC0000000
+/* Rx/Tx Status */
+#define PCH_UDC_RXTX_STS 0x30000000
+#define PCH_UDC_RTS_SUCC 0x00000000
+#define PCH_UDC_RTS_DESERR 0x10000000
+#define PCH_UDC_RTS_BUFERR 0x30000000
+/* Last Descriptor Indication */
+#define PCH_UDC_DMA_LAST 0x08000000
+/* Number of Rx/Tx Bytes Mask */
+#define PCH_UDC_RXTX_BYTES 0x0000ffff
+
+/**
+ * struct pch_udc_cfg_data - Structure to hold current configuration
+ * and interface information
+ * @cur_cfg: current configuration in use
+ * @cur_intf: current interface in use
+ * @cur_alt: current alt interface in use
+ */
+struct pch_udc_cfg_data {
+ u16 cur_cfg;
+ u16 cur_intf;
+ u16 cur_alt;
+};
+
+/**
+ * struct pch_udc_ep - Structure holding a PCH USB device Endpoint information
+ * @ep: embedded ep request
+ * @td_stp_phys: for setup request
+ * @td_data_phys: for data request
+ * @td_stp: for setup request
+ * @td_data: for data request
+ * @dev: reference to device struct
+ * @offset_addr: offset address of ep register
+ * @desc: for this ep
+ * @queue: queue for requests
+ * @num: endpoint number
+ * @in: endpoint is IN
+ * @halted: endpoint halted?
+ * @epsts: Endpoint status
+ */
+struct pch_udc_ep {
+ struct usb_ep ep;
+ dma_addr_t td_stp_phys;
+ dma_addr_t td_data_phys;
+ struct pch_udc_stp_dma_desc *td_stp;
+ struct pch_udc_data_dma_desc *td_data;
+ struct pch_udc_dev *dev;
+ unsigned long offset_addr;
+ const struct usb_endpoint_descriptor *desc;
+ struct list_head queue;
+ unsigned num:5,
+ in:1,
+ halted:1;
+ unsigned long epsts;
+};
+
+/**
+ * struct pch_udc_dev - Structure holding complete information
+ * of the PCH USB device
+ * @gadget: gadget driver data
+ * @driver: reference to gadget driver bound
+ * @pdev: reference to the PCI device
+ * @ep: array of endpoints
+ * @lock: protects all state
+ * @active: enabled the PCI device
+ * @stall: stall requested
+ * @prot_stall: protcol stall requested
+ * @irq_registered: irq registered with system
+ * @mem_region: device memory mapped
+ * @registered: driver regsitered with system
+ * @suspended: driver in suspended state
+ * @connected: gadget driver associated
+ * @set_cfg_not_acked: pending acknowledgement 4 setup
+ * @waiting_zlp_ack: pending acknowledgement 4 ZLP
+ * @data_requests: DMA pool for data requests
+ * @stp_requests: DMA pool for setup requests
+ * @dma_addr: DMA pool for received
+ * @ep0out_buf: Buffer for DMA
+ * @setup_data: Received setup data
+ * @phys_addr: of device memory
+ * @base_addr: for mapped device memory
+ * @irq: IRQ line for the device
+ * @cfg_data: current cfg, intf, and alt in use
+ */
+struct pch_udc_dev {
+ struct usb_gadget gadget;
+ struct usb_gadget_driver *driver;
+ struct pci_dev *pdev;
+ struct pch_udc_ep ep[PCH_UDC_EP_NUM];
+ spinlock_t lock; /* protects all state */
+ unsigned active:1,
+ stall:1,
+ prot_stall:1,
+ irq_registered:1,
+ mem_region:1,
+ registered:1,
+ suspended:1,
+ connected:1,
+ set_cfg_not_acked:1,
+ waiting_zlp_ack:1;
+ struct pci_pool *data_requests;
+ struct pci_pool *stp_requests;
+ dma_addr_t dma_addr;
+ unsigned long ep0out_buf[64];
+ struct usb_ctrlrequest setup_data;
+ unsigned long phys_addr;
+ void __iomem *base_addr;
+ unsigned irq;
+ struct pch_udc_cfg_data cfg_data;
+};
+
+#define PCH_UDC_PCI_BAR 1
+#define PCI_DEVICE_ID_INTEL_EG20T_UDC 0x8808
+
+static const char ep0_string[] = "ep0in";
+static DEFINE_SPINLOCK(udc_stall_spinlock); /* stall spin lock */
+struct pch_udc_dev *pch_udc; /* pointer to device object */
+
+static int speed_fs;
+module_param_named(speed_fs, speed_fs, bool, S_IRUGO);
+MODULE_PARM_DESC(speed_fs, "true for Full speed operation");
+
+/**
+ * struct pch_udc_request - Structure holding a PCH USB device request packet
+ * @req: embedded ep request
+ * @td_data_phys: phys. address
+ * @td_data: first dma desc. of chain
+ * @td_data_last: last dma desc. of chain
+ * @queue: associated queue
+ * @dma_going: DMA in progress for request
+ * @dma_mapped: DMA memory mapped for request
+ * @dma_done: DMA completed for request
+ * @chain_len: chain length
+ */
+struct pch_udc_request {
+ struct usb_request req;
+ dma_addr_t td_data_phys;
+ struct pch_udc_data_dma_desc *td_data;
+ struct pch_udc_data_dma_desc *td_data_last;
+ struct list_head queue;
+ unsigned dma_going:1,
+ dma_mapped:1,
+ dma_done:1;
+ unsigned chain_len;
+};
+
+static inline u32 pch_udc_readl(struct pch_udc_dev *dev, unsigned long reg)
+{
+ return ioread32(dev->base_addr + reg);
+}
+
+static inline void pch_udc_writel(struct pch_udc_dev *dev,
+ unsigned long val, unsigned long reg)
+{
+ iowrite32(val, dev->base_addr + reg);
+}
+
+static inline void pch_udc_bit_set(struct pch_udc_dev *dev,
+ unsigned long reg,
+ unsigned long bitmask)
+{
+ pch_udc_writel(dev, pch_udc_readl(dev, reg) | bitmask, reg);
+}
+
+static inline void pch_udc_bit_clr(struct pch_udc_dev *dev,
+ unsigned long reg,
+ unsigned long bitmask)
+{
+ pch_udc_writel(dev, pch_udc_readl(dev, reg) & ~(bitmask), reg);
+}
+
+static inline u32 pch_udc_ep_readl(struct pch_udc_ep *ep, unsigned long reg)
+{
+ return ioread32(ep->dev->base_addr + ep->offset_addr + reg);
+}
+
+static inline void pch_udc_ep_writel(struct pch_udc_ep *ep,
+ unsigned long val, unsigned long reg)
+{
+ iowrite32(val, ep->dev->base_addr + ep->offset_addr + reg);
+}
+
+static inline void pch_udc_ep_bit_set(struct pch_udc_ep *ep,
+ unsigned long reg,
+ unsigned long bitmask)
+{
+ pch_udc_ep_writel(ep, pch_udc_ep_readl(ep, reg) | bitmask, reg);
+}
+
+static inline void pch_udc_ep_bit_clr(struct pch_udc_ep *ep,
+ unsigned long reg,
+ unsigned long bitmask)
+{
+ pch_udc_ep_writel(ep, pch_udc_ep_readl(ep, reg) & ~(bitmask), reg);
+}
+
+/**
+ * pch_udc_csr_busy() - Wait till idle.
+ * @dev: Reference to pch_udc_dev structure
+ */
+static void pch_udc_csr_busy(struct pch_udc_dev *dev)
+{
+ unsigned int count = 200;
+
+ /* Wait till idle */
+ while ((pch_udc_readl(dev, UDC_CSR_BUSY_ADDR) & UDC_CSR_BUSY)
+ && --count)
+ cpu_relax();
+ if (!count)
+ dev_err(&dev->pdev->dev, "%s: wait error\n", __func__);
+}
+
+/**
+ * pch_udc_write_csr() - Write the command and status registers.
+ * @dev: Reference to pch_udc_dev structure
+ * @val: value to be written to CSR register
+ * @addr: address of CSR register
+ */
+static void pch_udc_write_csr(struct pch_udc_dev *dev, unsigned long val,
+ unsigned int ep)
+{
+ unsigned long reg = PCH_UDC_CSR(ep);
+
+ pch_udc_csr_busy(dev); /* Wait till idle */
+ pch_udc_writel(dev, val, reg);
+ pch_udc_csr_busy(dev); /* Wait till idle */
+}
+
+/**
+ * pch_udc_read_csr() - Read the command and status registers.
+ * @dev: Reference to pch_udc_dev structure
+ * @addr: address of CSR register
+ *
+ * Return codes: content of CSR register
+ */
+static u32 pch_udc_read_csr(struct pch_udc_dev *dev, unsigned int ep)
+{
+ unsigned long reg = PCH_UDC_CSR(ep);
+
+ pch_udc_csr_busy(dev); /* Wait till idle */
+ pch_udc_readl(dev, reg); /* Dummy read */
+ pch_udc_csr_busy(dev); /* Wait till idle */
+ return pch_udc_readl(dev, reg);
+}
+
+/**
+ * pch_udc_rmt_wakeup() - Initiate for remote wakeup
+ * @dev: Reference to pch_udc_dev structure
+ */
+static inline void pch_udc_rmt_wakeup(struct pch_udc_dev *dev)
+{
+ pch_udc_bit_set(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_RES);
+ mdelay(1);
+ pch_udc_bit_clr(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_RES);
+}
+
+/**
+ * pch_udc_get_frame() - Get the current frame from device status register
+ * @dev: Reference to pch_udc_dev structure
+ * Retern current frame
+ */
+static inline int pch_udc_get_frame(struct pch_udc_dev *dev)
+{
+ u32 frame = pch_udc_readl(dev, UDC_DEVSTS_ADDR);
+ return (frame & UDC_DEVSTS_TS_MASK) >> UDC_DEVSTS_TS_SHIFT;
+}
+
+/**
+ * pch_udc_clear_selfpowered() - Clear the self power control
+ * @dev: Reference to pch_udc_regs structure
+ */
+static inline void pch_udc_clear_selfpowered(struct pch_udc_dev *dev)
+{
+ pch_udc_bit_clr(dev, UDC_DEVCFG_ADDR, UDC_DEVCFG_SP);
+}
+
+/**
+ * pch_udc_set_selfpowered() - Set the self power control
+ * @dev: Reference to pch_udc_regs structure
+ */
+static inline void pch_udc_set_selfpowered(struct pch_udc_dev *dev)
+{
+ pch_udc_bit_set(dev, UDC_DEVCFG_ADDR, UDC_DEVCFG_SP);
+}
+
+/**
+ * pch_udc_set_disconnect() - Set the disconnect status.
+ * @dev: Reference to pch_udc_regs structure
+ */
+static inline void pch_udc_set_disconnect(struct pch_udc_dev *dev)
+{
+ pch_udc_bit_set(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_SD);
+}
+
+/**
+ * pch_udc_clear_disconnect() - Clear the disconnect status.
+ * @dev: Reference to pch_udc_regs structure
+ */
+static void pch_udc_clear_disconnect(struct pch_udc_dev *dev)
+{
+ /* Clear the disconnect */
+ pch_udc_bit_set(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_RES);
+ pch_udc_bit_clr(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_SD);
+ mdelay(1);
+ /* Resume USB signalling */
+ pch_udc_bit_clr(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_RES);
+}
+
+/**
+ * pch_udc_vbus_session() - set or clearr the disconnect status.
+ * @dev: Reference to pch_udc_regs structure
+ * @is_active: Parameter specifying the action
+ * 0: indicating VBUS power is ending
+ * !0: indicating VBUS power is starting
+ */
+static inline void pch_udc_vbus_session(struct pch_udc_dev *dev,
+ int is_active)
+{
+ if (is_active)
+ pch_udc_clear_disconnect(dev);
+ else
+ pch_udc_set_disconnect(dev);
+}
+
+/**
+ * pch_udc_ep_set_stall() - Set the stall of endpoint
+ * @ep: Reference to structure of type pch_udc_ep_regs
+ */
+static void pch_udc_ep_set_stall(struct pch_udc_ep *ep)
+{
+ if (ep->in) {
+ pch_udc_ep_bit_set(ep, UDC_EPCTL_ADDR, UDC_EPCTL_F);
+ pch_udc_ep_bit_set(ep, UDC_EPCTL_ADDR, UDC_EPCTL_S);
+ } else {
+ pch_udc_ep_bit_set(ep, UDC_EPCTL_ADDR, UDC_EPCTL_S);
+ }
+}
+
+/**
+ * pch_udc_ep_clear_stall() - Clear the stall of endpoint
+ * @ep: Reference to structure of type pch_udc_ep_regs
+ */
+static inline void pch_udc_ep_clear_stall(struct pch_udc_ep *ep)
+{
+ /* Clear the stall */
+ pch_udc_ep_bit_clr(ep, UDC_EPCTL_ADDR, UDC_EPCTL_S);
+ /* Clear NAK by writing CNAK */
+ pch_udc_ep_bit_set(ep, UDC_EPCTL_ADDR, UDC_EPCTL_CNAK);
+}
+
+/**
+ * pch_udc_ep_set_trfr_type() - Set the transfer type of endpoint
+ * @ep: Reference to structure of type pch_udc_ep_regs
+ * @type: Type of endpoint
+ */
+static inline void pch_udc_ep_set_trfr_type(struct pch_udc_ep *ep,
+ u8 type)
+{
+ pch_udc_ep_writel(ep, ((type << UDC_EPCTL_ET_SHIFT) &
+ UDC_EPCTL_ET_MASK), UDC_EPCTL_ADDR);
+}
+
+/**
+ * pch_udc_ep_set_bufsz() - Set the maximum packet size for the endpoint
+ * @ep: Reference to structure of type pch_udc_ep_regs
+ * @buf_size: The buffer size
+ */
+static void pch_udc_ep_set_bufsz(struct pch_udc_ep *ep,
+ u32 buf_size, u32 ep_in)
+{
+ u32 data;
+ if (ep_in) {
+ data = pch_udc_ep_readl(ep, UDC_BUFIN_FRAMENUM_ADDR);
+ data = (data & 0xffff0000) | (buf_size & 0xffff);
+ pch_udc_ep_writel(ep, data, UDC_BUFIN_FRAMENUM_ADDR);
+ } else {
+ data = pch_udc_ep_readl(ep, UDC_BUFOUT_MAXPKT_ADDR);
+ data = (buf_size << 16) | (data & 0xffff);
+ pch_udc_ep_writel(ep, data, UDC_BUFOUT_MAXPKT_ADDR);
+ }
+}
+
+/**
+ * pch_udc_ep_set_maxpkt() - Set the Max packet size for the endpoint
+ * @ep: Reference to structure of type pch_udc_ep_regs
+ * @pkt_size: The packet size
+ */
+static void pch_udc_ep_set_maxpkt(struct pch_udc_ep *ep, u32 pkt_size)
+{
+ u32 data = pch_udc_ep_readl(ep, UDC_BUFOUT_MAXPKT_ADDR);
+ data = (data & 0xffff0000) | (pkt_size & 0xffff);
+ pch_udc_ep_writel(ep, data, UDC_BUFOUT_MAXPKT_ADDR);
+}
+
+/**
+ * pch_udc_ep_set_subptr() - Set the Setup buffer pointer for the endpoint
+ * @ep: Reference to structure of type pch_udc_ep_regs
+ * @addr: Address of the register
+ */
+static inline void pch_udc_ep_set_subptr(struct pch_udc_ep *ep, u32 addr)
+{
+ pch_udc_ep_writel(ep, addr, UDC_SUBPTR_ADDR);
+}
+
+/**
+ * pch_udc_ep_set_ddptr() - Set the Data descriptor pointer for the endpoint
+ * @ep: Reference to structure of type pch_udc_ep_regs
+ * @addr: Address of the register
+ */
+static inline void pch_udc_ep_set_ddptr(struct pch_udc_ep *ep, u32 addr)
+{
+ pch_udc_ep_writel(ep, addr, UDC_DESPTR_ADDR);
+}
+
+/**
+ * pch_udc_ep_set_pd() - Set the poll demand bit for the endpoint
+ * @ep: Reference to structure of type pch_udc_ep_regs
+ */
+static inline void pch_udc_ep_set_pd(struct pch_udc_ep *ep)
+{
+ pch_udc_ep_bit_set(ep, UDC_EPCTL_ADDR, UDC_EPCTL_P);
+}
+
+/**
+ * pch_udc_ep_set_rrdy() - Set the receive ready bit for the endpoint
+ * @ep: Reference to structure of type pch_udc_ep_regs
+ */
+static inline void pch_udc_ep_set_rrdy(struct pch_udc_ep *ep)
+{
+ pch_udc_ep_bit_set(ep, UDC_EPCTL_ADDR, UDC_EPCTL_RRDY);
+}
+
+/**
+ * pch_udc_ep_clear_rrdy() - Clear the receive ready bit for the endpoint
+ * @ep: Reference to structure of type pch_udc_ep_regs
+ */
+static inline void pch_udc_ep_clear_rrdy(struct pch_udc_ep *ep)
+{
+ pch_udc_ep_bit_clr(ep, UDC_EPCTL_ADDR, UDC_EPCTL_RRDY);
+}
+
+/**
+ * pch_udc_set_dma() - Set the 'TDE' or RDE bit of device control
+ * register depending on the direction specified
+ * @dev: Reference to structure of type pch_udc_regs
+ * @dir: whether Tx or Rx
+ * DMA_DIR_RX: Receive
+ * DMA_DIR_TX: Transmit
+ */
+static inline void pch_udc_set_dma(struct pch_udc_dev *dev, int dir)
+{
+ if (dir == DMA_DIR_RX)
+ pch_udc_bit_set(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_RDE);
+ else if (dir == DMA_DIR_TX)
+ pch_udc_bit_set(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_TDE);
+}
+
+/**
+ * pch_udc_clear_dma() - Clear the 'TDE' or RDE bit of device control
+ * register depending on the direction specified
+ * @dev: Reference to structure of type pch_udc_regs
+ * @dir: Whether Tx or Rx
+ * DMA_DIR_RX: Receive
+ * DMA_DIR_TX: Transmit
+ */
+static inline void pch_udc_clear_dma(struct pch_udc_dev *dev, int dir)
+{
+ if (dir == DMA_DIR_RX)
+ pch_udc_bit_clr(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_RDE);
+ else if (dir == DMA_DIR_TX)
+ pch_udc_bit_clr(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_TDE);
+}
+
+/**
+ * pch_udc_set_csr_done() - Set the device control register
+ * CSR done field (bit 13)
+ * @dev: reference to structure of type pch_udc_regs
+ */
+static inline void pch_udc_set_csr_done(struct pch_udc_dev *dev)
+{
+ pch_udc_bit_set(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_CSR_DONE);
+}
+
+/**
+ * pch_udc_disable_interrupts() - Disables the specified interrupts
+ * @dev: Reference to structure of type pch_udc_regs
+ * @mask: Mask to disable interrupts
+ */
+static inline void pch_udc_disable_interrupts(struct pch_udc_dev *dev,
+ u32 mask)
+{
+ pch_udc_bit_set(dev, UDC_DEVIRQMSK_ADDR, mask);
+}
+
+/**
+ * pch_udc_enable_interrupts() - Enable the specified interrupts
+ * @dev: Reference to structure of type pch_udc_regs
+ * @mask: Mask to enable interrupts
+ */
+static inline void pch_udc_enable_interrupts(struct pch_udc_dev *dev,
+ u32 mask)
+{
+ pch_udc_bit_clr(dev, UDC_DEVIRQMSK_ADDR, mask);
+}
+
+/**
+ * pch_udc_disable_ep_interrupts() - Disable endpoint interrupts
+ * @dev: Reference to structure of type pch_udc_regs
+ * @mask: Mask to disable interrupts
+ */
+static inline void pch_udc_disable_ep_interrupts(struct pch_udc_dev *dev,
+ u32 mask)
+{
+ pch_udc_bit_set(dev, UDC_EPIRQMSK_ADDR, mask);
+}
+
+/**
+ * pch_udc_enable_ep_interrupts() - Enable endpoint interrupts
+ * @dev: Reference to structure of type pch_udc_regs
+ * @mask: Mask to enable interrupts
+ */
+static inline void pch_udc_enable_ep_interrupts(struct pch_udc_dev *dev,
+ u32 mask)
+{
+ pch_udc_bit_clr(dev, UDC_EPIRQMSK_ADDR, mask);
+}
+
+/**
+ * pch_udc_read_device_interrupts() - Read the device interrupts
+ * @dev: Reference to structure of type pch_udc_regs
+ * Retern The device interrupts
+ */
+static inline u32 pch_udc_read_device_interrupts(struct pch_udc_dev *dev)
+{
+ return pch_udc_readl(dev, UDC_DEVIRQSTS_ADDR);
+}
+
+/**
+ * pch_udc_write_device_interrupts() - Write device interrupts
+ * @dev: Reference to structure of type pch_udc_regs
+ * @val: The value to be written to interrupt register
+ */
+static inline void pch_udc_write_device_interrupts(struct pch_udc_dev *dev,
+ u32 val)
+{
+ pch_udc_writel(dev, val, UDC_DEVIRQSTS_ADDR);
+}
+
+/**
+ * pch_udc_read_ep_interrupts() - Read the endpoint interrupts
+ * @dev: Reference to structure of type pch_udc_regs
+ * Retern The endpoint interrupt
+ */
+static inline u32 pch_udc_read_ep_interrupts(struct pch_udc_dev *dev)
+{
+ return pch_udc_readl(dev, UDC_EPIRQSTS_ADDR);
+}
+
+/**
+ * pch_udc_write_ep_interrupts() - Clear endpoint interupts
+ * @dev: Reference to structure of type pch_udc_regs
+ * @val: The value to be written to interrupt register
+ */
+static inline void pch_udc_write_ep_interrupts(struct pch_udc_dev *dev,
+ u32 val)
+{
+ pch_udc_writel(dev, val, UDC_EPIRQSTS_ADDR);
+}
+
+/**
+ * pch_udc_read_device_status() - Read the device status
+ * @dev: Reference to structure of type pch_udc_regs
+ * Retern The device status
+ */
+static inline u32 pch_udc_read_device_status(struct pch_udc_dev *dev)
+{
+ return pch_udc_readl(dev, UDC_DEVSTS_ADDR);
+}
+
+/**
+ * pch_udc_read_ep_control() - Read the endpoint control
+ * @ep: Reference to structure of type pch_udc_ep_regs
+ * Retern The endpoint control register value
+ */
+static inline u32 pch_udc_read_ep_control(struct pch_udc_ep *ep)
+{
+ return pch_udc_ep_readl(ep, UDC_EPCTL_ADDR);
+}
+
+/**
+ * pch_udc_clear_ep_control() - Clear the endpoint control register
+ * @ep: Reference to structure of type pch_udc_ep_regs
+ * Retern The endpoint control register value
+ */
+static inline void pch_udc_clear_ep_control(struct pch_udc_ep *ep)
+{
+ return pch_udc_ep_writel(ep, 0, UDC_EPCTL_ADDR);
+}
+
+/**
+ * pch_udc_read_ep_status() - Read the endpoint status
+ * @ep: Reference to structure of type pch_udc_ep_regs
+ * Retern The endpoint status
+ */
+static inline u32 pch_udc_read_ep_status(struct pch_udc_ep *ep)
+{
+ return pch_udc_ep_readl(ep, UDC_EPSTS_ADDR);
+}
+
+/**
+ * pch_udc_clear_ep_status() - Clear the endpoint status
+ * @ep: Reference to structure of type pch_udc_ep_regs
+ * @stat: Endpoint status
+ */
+static inline void pch_udc_clear_ep_status(struct pch_udc_ep *ep,
+ u32 stat)
+{
+ return pch_udc_ep_writel(ep, stat, UDC_EPSTS_ADDR);
+}
+
+/**
+ * pch_udc_ep_set_nak() - Set the bit 7 (SNAK field)
+ * of the endpoint control register
+ * @ep: Reference to structure of type pch_udc_ep_regs
+ */
+static inline void pch_udc_ep_set_nak(struct pch_udc_ep *ep)
+{
+ pch_udc_ep_bit_set(ep, UDC_EPCTL_ADDR, UDC_EPCTL_SNAK);
+}
+
+/**
+ * pch_udc_ep_clear_nak() - Set the bit 8 (CNAK field)
+ * of the endpoint control register
+ * @ep: reference to structure of type pch_udc_ep_regs
+ */
+static void pch_udc_ep_clear_nak(struct pch_udc_ep *ep)
+{
+ unsigned int loopcnt = 0;
+ struct pch_udc_dev *dev = ep->dev;
+
+ if (!(pch_udc_ep_readl(ep, UDC_EPCTL_ADDR) & UDC_EPCTL_NAK))
+ return;
+ if (!ep->in) {
+ loopcnt = 10000;
+ while (!(pch_udc_read_ep_status(ep) & UDC_EPSTS_MRXFIFO_EMP) &&
+ --loopcnt)
+ udelay(5);
+ if (!loopcnt)
+ dev_err(&dev->pdev->dev, "%s: RxFIFO not Empty\n",
+ __func__);
+ }
+ loopcnt = 10000;
+ while ((pch_udc_read_ep_control(ep) & UDC_EPCTL_NAK) && --loopcnt) {
+ pch_udc_ep_bit_set(ep, UDC_EPCTL_ADDR, UDC_EPCTL_CNAK);
+ udelay(5);
+ }
+ if (!loopcnt)
+ dev_err(&dev->pdev->dev, "%s: Clear NAK not set for ep%d%s\n",
+ __func__, ep->num, (ep->in ? "in" : "out"));
+}
+
+/**
+ * pch_udc_ep_fifo_flush() - Flush the endpoint fifo
+ * @ep: reference to structure of type pch_udc_ep_regs
+ * @dir: direction of endpoint
+ * 0: endpoint is OUT
+ * !0: endpoint is IN
+ */
+static void pch_udc_ep_fifo_flush(struct pch_udc_ep *ep, int dir)
+{
+ unsigned int loopcnt = 0;
+ struct pch_udc_dev *dev = ep->dev;
+
+ if (dir) { /* IN ep */
+ pch_udc_ep_bit_set(ep, UDC_EPCTL_ADDR, UDC_EPCTL_F);
+ return;
+ }
+
+ if (pch_udc_read_ep_status(ep) & UDC_EPSTS_MRXFIFO_EMP)
+ return;
+ pch_udc_ep_bit_set(ep, UDC_EPCTL_ADDR, UDC_EPCTL_MRXFLUSH);
+ /* Wait for RxFIFO Empty */
+ loopcnt = 10000;
+ while (!(pch_udc_read_ep_status(ep) & UDC_EPSTS_MRXFIFO_EMP) &&
+ --loopcnt)
+ udelay(5);
+ if (!loopcnt)
+ dev_err(&dev->pdev->dev, "RxFIFO not Empty\n");
+ pch_udc_ep_bit_clr(ep, UDC_EPCTL_ADDR, UDC_EPCTL_MRXFLUSH);
+}
+
+/**
+ * pch_udc_ep_enable() - This api enables endpoint
+ * @regs: Reference to structure pch_udc_ep_regs
+ * @desc: endpoint descriptor
+ */
+static void pch_udc_ep_enable(struct pch_udc_ep *ep,
+ struct pch_udc_cfg_data *cfg,
+ const struct usb_endpoint_descriptor *desc)
+{
+ u32 val = 0;
+ u32 buff_size = 0;
+
+ pch_udc_ep_set_trfr_type(ep, desc->bmAttributes);
+ if (ep->in)
+ buff_size = UDC_EPIN_BUFF_SIZE;
+ else
+ buff_size = UDC_EPOUT_BUFF_SIZE;
+ pch_udc_ep_set_bufsz(ep, buff_size, ep->in);
+ pch_udc_ep_set_maxpkt(ep, le16_to_cpu(desc->wMaxPacketSize));
+ pch_udc_ep_set_nak(ep);
+ pch_udc_ep_fifo_flush(ep, ep->in);
+ /* Configure the endpoint */
+ val = ep->num << UDC_CSR_NE_NUM_SHIFT | ep->in << UDC_CSR_NE_DIR_SHIFT |
+ ((desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) <<
+ UDC_CSR_NE_TYPE_SHIFT) |
+ (cfg->cur_cfg << UDC_CSR_NE_CFG_SHIFT) |
+ (cfg->cur_intf << UDC_CSR_NE_INTF_SHIFT) |
+ (cfg->cur_alt << UDC_CSR_NE_ALT_SHIFT) |
+ le16_to_cpu(desc->wMaxPacketSize) << UDC_CSR_NE_MAX_PKT_SHIFT;
+
+ if (ep->in)
+ pch_udc_write_csr(ep->dev, val, UDC_EPIN_IDX(ep->num));
+ else
+ pch_udc_write_csr(ep->dev, val, UDC_EPOUT_IDX(ep->num));
+}
+
+/**
+ * pch_udc_ep_disable() - This api disables endpoint
+ * @regs: Reference to structure pch_udc_ep_regs
+ */
+static void pch_udc_ep_disable(struct pch_udc_ep *ep)
+{
+ if (ep->in) {
+ /* flush the fifo */
+ pch_udc_ep_writel(ep, UDC_EPCTL_F, UDC_EPCTL_ADDR);
+ /* set NAK */
+ pch_udc_ep_writel(ep, UDC_EPCTL_SNAK, UDC_EPCTL_ADDR);
+ pch_udc_ep_bit_set(ep, UDC_EPSTS_ADDR, UDC_EPSTS_IN);
+ } else {
+ /* set NAK */
+ pch_udc_ep_writel(ep, UDC_EPCTL_SNAK, UDC_EPCTL_ADDR);
+ }
+ /* reset desc pointer */
+ pch_udc_ep_writel(ep, 0, UDC_DESPTR_ADDR);
+}
+
+/**
+ * pch_udc_wait_ep_stall() - Wait EP stall.
+ * @dev: Reference to pch_udc_dev structure
+ */
+static void pch_udc_wait_ep_stall(struct pch_udc_ep *ep)
+{
+ unsigned int count = 10000;
+
+ /* Wait till idle */
+ while ((pch_udc_read_ep_control(ep) & UDC_EPCTL_S) && --count)
+ udelay(5);
+ if (!count)
+ dev_err(&ep->dev->pdev->dev, "%s: wait error\n", __func__);
+}
+
+/**
+ * pch_udc_init() - This API initializes usb device controller
+ * @dev: Rreference to pch_udc_regs structure
+ */
+static void pch_udc_init(struct pch_udc_dev *dev)
+{
+ if (NULL == dev) {
+ pr_err("%s: Invalid address\n", __func__);
+ return;
+ }
+ /* Soft Reset and Reset PHY */
+ pch_udc_writel(dev, UDC_SRST, UDC_SRST_ADDR);
+ pch_udc_writel(dev, UDC_SRST | UDC_PSRST, UDC_SRST_ADDR);
+ mdelay(1);
+ pch_udc_writel(dev, UDC_SRST, UDC_SRST_ADDR);
+ pch_udc_writel(dev, 0x00, UDC_SRST_ADDR);
+ mdelay(1);
+ /* mask and clear all device interrupts */
+ pch_udc_bit_set(dev, UDC_DEVIRQMSK_ADDR, UDC_DEVINT_MSK);
+ pch_udc_bit_set(dev, UDC_DEVIRQSTS_ADDR, UDC_DEVINT_MSK);
+
+ /* mask and clear all ep interrupts */
+ pch_udc_bit_set(dev, UDC_EPIRQMSK_ADDR, UDC_EPINT_MSK_DISABLE_ALL);
+ pch_udc_bit_set(dev, UDC_EPIRQSTS_ADDR, UDC_EPINT_MSK_DISABLE_ALL);
+
+ /* enable dynamic CSR programmingi, self powered and device speed */
+ if (speed_fs)
+ pch_udc_bit_set(dev, UDC_DEVCFG_ADDR, UDC_DEVCFG_CSR_PRG |
+ UDC_DEVCFG_SP | UDC_DEVCFG_SPD_FS);
+ else /* defaul high speed */
+ pch_udc_bit_set(dev, UDC_DEVCFG_ADDR, UDC_DEVCFG_CSR_PRG |
+ UDC_DEVCFG_SP | UDC_DEVCFG_SPD_HS);
+ pch_udc_bit_set(dev, UDC_DEVCTL_ADDR,
+ (PCH_UDC_THLEN << UDC_DEVCTL_THLEN_SHIFT) |
+ (PCH_UDC_BRLEN << UDC_DEVCTL_BRLEN_SHIFT) |
+ UDC_DEVCTL_MODE | UDC_DEVCTL_BREN |
+ UDC_DEVCTL_THE);
+}
+
+/**
+ * pch_udc_exit() - This API exit usb device controller
+ * @dev: Reference to pch_udc_regs structure
+ */
+static void pch_udc_exit(struct pch_udc_dev *dev)
+{
+ /* mask all device interrupts */
+ pch_udc_bit_set(dev, UDC_DEVIRQMSK_ADDR, UDC_DEVINT_MSK);
+ /* mask all ep interrupts */
+ pch_udc_bit_set(dev, UDC_EPIRQMSK_ADDR, UDC_EPINT_MSK_DISABLE_ALL);
+ /* put device in disconnected state */
+ pch_udc_set_disconnect(dev);
+}
+
+/**
+ * pch_udc_pcd_get_frame() - This API is invoked to get the current frame number
+ * @gadget: Reference to the gadget driver
+ *
+ * Return codes:
+ * 0: Success
+ * -EINVAL: If the gadget passed is NULL
+ */
+static int pch_udc_pcd_get_frame(struct usb_gadget *gadget)
+{
+ struct pch_udc_dev *dev;
+
+ if (!gadget)
+ return -EINVAL;
+ dev = container_of(gadget, struct pch_udc_dev, gadget);
+ return pch_udc_get_frame(dev);
+}
+
+/**
+ * pch_udc_pcd_wakeup() - This API is invoked to initiate a remote wakeup
+ * @gadget: Reference to the gadget driver
+ *
+ * Return codes:
+ * 0: Success
+ * -EINVAL: If the gadget passed is NULL
+ */
+static int pch_udc_pcd_wakeup(struct usb_gadget *gadget)
+{
+ struct pch_udc_dev *dev;
+ unsigned long flags;
+
+ if (!gadget)
+ return -EINVAL;
+ dev = container_of(gadget, struct pch_udc_dev, gadget);
+ spin_lock_irqsave(&dev->lock, flags);
+ pch_udc_rmt_wakeup(dev);
+ spin_unlock_irqrestore(&dev->lock, flags);
+ return 0;
+}
+
+/**
+ * pch_udc_pcd_selfpowered() - This API is invoked to specify whether the device
+ * is self powered or not
+ * @gadget: Reference to the gadget driver
+ * @value: Specifies self powered or not
+ *
+ * Return codes:
+ * 0: Success
+ * -EINVAL: If the gadget passed is NULL
+ */
+static int pch_udc_pcd_selfpowered(struct usb_gadget *gadget, int value)
+{
+ struct pch_udc_dev *dev;
+
+ if (!gadget)
+ return -EINVAL;
+ dev = container_of(gadget, struct pch_udc_dev, gadget);
+ if (value)
+ pch_udc_set_selfpowered(dev);
+ else
+ pch_udc_clear_selfpowered(dev);
+ return 0;
+}
+
+/**
+ * pch_udc_pcd_pullup() - This API is invoked to make the device
+ * visible/invisible to the host
+ * @gadget: Reference to the gadget driver
+ * @is_on: Specifies whether the pull up is made active or inactive
+ *
+ * Return codes:
+ * 0: Success
+ * -EINVAL: If the gadget passed is NULL
+ */
+static int pch_udc_pcd_pullup(struct usb_gadget *gadget, int is_on)
+{
+ struct pch_udc_dev *dev;
+
+ if (!gadget)
+ return -EINVAL;
+ dev = container_of(gadget, struct pch_udc_dev, gadget);
+ pch_udc_vbus_session(dev, is_on);
+ return 0;
+}
+
+/**
+ * pch_udc_pcd_vbus_session() - This API is used by a driver for an external
+ * transceiver (or GPIO) that
+ * detects a VBUS power session starting/ending
+ * @gadget: Reference to the gadget driver
+ * @is_active: specifies whether the session is starting or ending
+ *
+ * Return codes:
+ * 0: Success
+ * -EINVAL: If the gadget passed is NULL
+ */
+static int pch_udc_pcd_vbus_session(struct usb_gadget *gadget, int is_active)
+{
+ struct pch_udc_dev *dev;
+
+ if (!gadget)
+ return -EINVAL;
+ dev = container_of(gadget, struct pch_udc_dev, gadget);
+ pch_udc_vbus_session(dev, is_active);
+ return 0;
+}
+
+/**
+ * pch_udc_pcd_vbus_draw() - This API is used by gadget drivers during
+ * SET_CONFIGURATION calls to
+ * specify how much power the device can consume
+ * @gadget: Reference to the gadget driver
+ * @mA: specifies the current limit in 2mA unit
+ *
+ * Return codes:
+ * -EINVAL: If the gadget passed is NULL
+ * -EOPNOTSUPP:
+ */
+static int pch_udc_pcd_vbus_draw(struct usb_gadget *gadget, unsigned int mA)
+{
+ return -EOPNOTSUPP;
+}
+
+static const struct usb_gadget_ops pch_udc_ops = {
+ .get_frame = pch_udc_pcd_get_frame,
+ .wakeup = pch_udc_pcd_wakeup,
+ .set_selfpowered = pch_udc_pcd_selfpowered,
+ .pullup = pch_udc_pcd_pullup,
+ .vbus_session = pch_udc_pcd_vbus_session,
+ .vbus_draw = pch_udc_pcd_vbus_draw,
+};
+
+/**
+ * complete_req() - This API is invoked from the driver when processing
+ * of a request is complete
+ * @ep: Reference to the endpoint structure
+ * @req: Reference to the request structure
+ * @status: Indicates the success/failure of completion
+ */
+static void complete_req(struct pch_udc_ep *ep, struct pch_udc_request *req,
+ int status)
+{
+ struct pch_udc_dev *dev;
+ unsigned halted = ep->halted;
+
+ list_del_init(&req->queue);
+
+ /* set new status if pending */
+ if (req->req.status == -EINPROGRESS)
+ req->req.status = status;
+ else
+ status = req->req.status;
+
+ dev = ep->dev;
+ if (req->dma_mapped) {
+ if (ep->in)
+ pci_unmap_single(dev->pdev, req->req.dma,
+ req->req.length, PCI_DMA_TODEVICE);
+ else
+ pci_unmap_single(dev->pdev, req->req.dma,
+ req->req.length, PCI_DMA_FROMDEVICE);
+ req->dma_mapped = 0;
+ req->req.dma = DMA_ADDR_INVALID;
+ }
+ ep->halted = 1;
+ spin_unlock(&dev->lock);
+ if (!ep->in)
+ pch_udc_ep_clear_rrdy(ep);
+ req->req.complete(&ep->ep, &req->req);
+ spin_lock(&dev->lock);
+ ep->halted = halted;
+}
+
+/**
+ * empty_req_queue() - This API empties the request queue of an endpoint
+ * @ep: Reference to the endpoint structure
+ */
+static void empty_req_queue(struct pch_udc_ep *ep)
+{
+ struct pch_udc_request *req;
+
+ ep->halted = 1;
+ while (!list_empty(&ep->queue)) {
+ req = list_entry(ep->queue.next, struct pch_udc_request, queue);
+ complete_req(ep, req, -ESHUTDOWN); /* Remove from list */
+ }
+}
+
+/**
+ * pch_udc_free_dma_chain() - This function frees the DMA chain created
+ * for the request
+ * @dev Reference to the driver structure
+ * @req Reference to the request to be freed
+ *
+ * Return codes:
+ * 0: Success
+ */
+static void pch_udc_free_dma_chain(struct pch_udc_dev *dev,
+ struct pch_udc_request *req)
+{
+ struct pch_udc_data_dma_desc *td = req->td_data;
+ unsigned i = req->chain_len;
+
+ for (; i > 1; --i) {
+ dma_addr_t addr = (dma_addr_t)td->next;
+ /* do not free first desc., will be done by free for request */
+ td = phys_to_virt(addr);
+ pci_pool_free(dev->data_requests, td, addr);
+ }
+}
+
+/**
+ * pch_udc_create_dma_chain() - This function creates or reinitializes
+ * a DMA chain
+ * @ep: Reference to the endpoint structure
+ * @req: Reference to the request
+ * @buf_len: The buffer length
+ * @gfp_flags: Flags to be used while mapping the data buffer
+ *
+ * Return codes:
+ * 0: success,
+ * -ENOMEM: pci_pool_alloc invocation fails
+ */
+static int pch_udc_create_dma_chain(struct pch_udc_ep *ep,
+ struct pch_udc_request *req,
+ unsigned long buf_len,
+ gfp_t gfp_flags)
+{
+ struct pch_udc_data_dma_desc *td = req->td_data, *last;
+ unsigned long bytes = req->req.length, i = 0;
+ dma_addr_t dma_addr;
+ unsigned len = 1;
+
+ if (req->chain_len > 1)
+ pch_udc_free_dma_chain(ep->dev, req);
+
+ for (; ; bytes -= buf_len, ++len) {
+ if (ep->in)
+ td->status = PCH_UDC_BS_HST_BSY | min(buf_len, bytes);
+ else
+ td->status = PCH_UDC_BS_HST_BSY;
+
+ if (bytes <= buf_len)
+ break;
+
+ last = td;
+ td = pci_pool_alloc(ep->dev->data_requests, gfp_flags,
+ &dma_addr);
+ if (!td)
+ goto nomem;
+
+ i += buf_len;
+ td->dataptr = req->req.dma + i;
+ last->next = dma_addr;
+ }
+
+ req->td_data_last = td;
+ td->status |= PCH_UDC_DMA_LAST;
+ td->next = req->td_data_phys;
+ req->chain_len = len;
+ return 0;
+
+nomem:
+ if (len > 1) {
+ req->chain_len = len;
+ pch_udc_free_dma_chain(ep->dev, req);
+ }
+ req->chain_len = 1;
+ return -ENOMEM;
+}
+
+/**
+ * prepare_dma() - This function creates and initializes the DMA chain
+ * for the request
+ * @ep: Reference to the endpoint structure
+ * @req: Reference to the request
+ * @gfp: Flag to be used while mapping the data buffer
+ *
+ * Return codes:
+ * 0: Success
+ * Other 0: linux error number on failure
+ */
+static int prepare_dma(struct pch_udc_ep *ep, struct pch_udc_request *req,
+ gfp_t gfp)
+{
+ int retval;
+
+ req->td_data->dataptr = req->req.dma;
+ req->td_data->status |= PCH_UDC_DMA_LAST;
+ /* Allocate and create a DMA chain */
+ retval = pch_udc_create_dma_chain(ep, req, ep->ep.maxpacket, gfp);
+ if (retval) {
+ pr_err("%s: could not create DMA chain: %d\n",
+ __func__, retval);
+ return retval;
+ }
+ if (!ep->in)
+ return 0;
+ if (req->req.length <= ep->ep.maxpacket)
+ req->td_data->status = PCH_UDC_DMA_LAST | PCH_UDC_BS_HST_BSY |
+ req->req.length;
+ /* if bytes < max packet then tx bytes must
+ * be written in packet per buffer mode
+ */
+ if ((req->req.length < ep->ep.maxpacket) || !ep->num)
+ req->td_data->status = (req->td_data->status &
+ ~PCH_UDC_RXTX_BYTES) | req->req.length;
+ req->td_data->status = (req->td_data->status &
+ ~PCH_UDC_BUFF_STS) | PCH_UDC_BS_HST_BSY;
+ return 0;
+}
+
+/**
+ * process_zlp() - This function process zero length packets
+ * from the gadget driver
+ * @ep: Reference to the endpoint structure
+ * @req: Reference to the request
+ */
+static void process_zlp(struct pch_udc_ep *ep, struct pch_udc_request *req)
+{
+ struct pch_udc_dev *dev = ep->dev;
+
+ /* IN zlp's are handled by hardware */
+ complete_req(ep, req, 0);
+
+ /* if set_config or set_intf is waiting for ack by zlp
+ * then set CSR_DONE
+ */
+ if (dev->set_cfg_not_acked) {
+ pch_udc_set_csr_done(dev);
+ dev->set_cfg_not_acked = 0;
+ }
+ /* setup command is ACK'ed now by zlp */
+ if (!dev->stall && dev->waiting_zlp_ack) {
+ pch_udc_ep_clear_nak(&(dev->ep[UDC_EP0IN_IDX]));
+ dev->waiting_zlp_ack = 0;
+ }
+}
+
+/**
+ * pch_udc_start_rxrequest() - This function starts the receive requirement.
+ * @ep: Reference to the endpoint structure
+ * @req: Reference to the request structure
+ */
+static void pch_udc_start_rxrequest(struct pch_udc_ep *ep,
+ struct pch_udc_request *req)
+{
+ struct pch_udc_data_dma_desc *td_data;
+
+ pch_udc_clear_dma(ep->dev, DMA_DIR_RX);
+ td_data = req->td_data;
+ ep->td_data = req->td_data;
+ /* Set the status bits for all descriptors */
+ while (1) {
+ td_data->status = (td_data->status & ~PCH_UDC_BUFF_STS) |
+ PCH_UDC_BS_HST_RDY;
+ if ((td_data->status & PCH_UDC_DMA_LAST) == PCH_UDC_DMA_LAST)
+ break;
+ td_data = phys_to_virt(td_data->next);
+ }
+ /* Write the descriptor pointer */
+ pch_udc_ep_set_ddptr(ep, req->td_data_phys);
+ req->dma_going = 1;
+ pch_udc_enable_ep_interrupts(ep->dev, UDC_EPINT_OUT_EP0 << ep->num);
+ pch_udc_set_dma(ep->dev, DMA_DIR_RX);
+ pch_udc_ep_clear_nak(ep);
+ pch_udc_ep_set_rrdy(ep);
+}
+
+/**
+ * pch_udc_pcd_ep_enable() - This API enables the endpoint. It is called
+ * from gadget driver
+ * @usbep: Reference to the USB endpoint structure
+ * @desc: Reference to the USB endpoint descriptor structure
+ *
+ * Return codes:
+ * 0: Success
+ * -EINVAL:
+ * -ESHUTDOWN:
+ */
+static int pch_udc_pcd_ep_enable(struct usb_ep *usbep,
+ const struct usb_endpoint_descriptor *desc)
+{
+ struct pch_udc_ep *ep;
+ struct pch_udc_dev *dev;
+ unsigned long iflags;
+
+ if (!usbep || (usbep->name == ep0_string) || !desc ||
+ (desc->bDescriptorType != USB_DT_ENDPOINT) || !desc->wMaxPacketSize)
+ return -EINVAL;
+
+ ep = container_of(usbep, struct pch_udc_ep, ep);
+ dev = ep->dev;
+ if (!dev->driver || (dev->gadget.speed == USB_SPEED_UNKNOWN))
+ return -ESHUTDOWN;
+ spin_lock_irqsave(&dev->lock, iflags);
+ ep->desc = desc;
+ ep->halted = 0;
+ pch_udc_ep_enable(ep, &ep->dev->cfg_data, desc);
+ ep->ep.maxpacket = le16_to_cpu(desc->wMaxPacketSize);
+ pch_udc_enable_ep_interrupts(ep->dev, PCH_UDC_EPINT(ep->in, ep->num));
+ spin_unlock_irqrestore(&dev->lock, iflags);
+ return 0;
+}
+
+/**
+ * pch_udc_pcd_ep_disable() - This API disables endpoint and is called
+ * from gadget driver
+ * @usbep Reference to the USB endpoint structure
+ *
+ * Return codes:
+ * 0: Success
+ * -EINVAL:
+ */
+static int pch_udc_pcd_ep_disable(struct usb_ep *usbep)
+{
+ struct pch_udc_ep *ep;
+ struct pch_udc_dev *dev;
+ unsigned long iflags;
+
+ if (!usbep)
+ return -EINVAL;
+
+ ep = container_of(usbep, struct pch_udc_ep, ep);
+ dev = ep->dev;
+ if ((usbep->name == ep0_string) || !ep->desc)
+ return -EINVAL;
+
+ spin_lock_irqsave(&ep->dev->lock, iflags);
+ empty_req_queue(ep);
+ ep->halted = 1;
+ pch_udc_ep_disable(ep);
+ pch_udc_disable_ep_interrupts(ep->dev, PCH_UDC_EPINT(ep->in, ep->num));
+ ep->desc = NULL;
+ INIT_LIST_HEAD(&ep->queue);
+ spin_unlock_irqrestore(&ep->dev->lock, iflags);
+ return 0;
+}
+
+/**
+ * pch_udc_alloc_request() - This function allocates request structure.
+ * It is called by gadget driver
+ * @usbep: Reference to the USB endpoint structure
+ * @gfp: Flag to be used while allocating memory
+ *
+ * Return codes:
+ * NULL: Failure
+ * Allocated address: Success
+ */
+static struct usb_request *pch_udc_alloc_request(struct usb_ep *usbep,
+ gfp_t gfp)
+{
+ struct pch_udc_request *req;
+ struct pch_udc_ep *ep;
+ struct pch_udc_data_dma_desc *dma_desc;
+ struct pch_udc_dev *dev;
+
+ if (!usbep)
+ return NULL;
+ ep = container_of(usbep, struct pch_udc_ep, ep);
+ dev = ep->dev;
+ req = kzalloc(sizeof *req, gfp);
+ if (!req)
+ return NULL;
+ req->req.dma = DMA_ADDR_INVALID;
+ INIT_LIST_HEAD(&req->queue);
+ if (!ep->dev->dma_addr)
+ return &req->req;
+ /* ep0 in requests are allocated from data pool here */
+ dma_desc = pci_pool_alloc(ep->dev->data_requests, gfp,
+ &req->td_data_phys);
+ if (NULL == dma_desc) {
+ kfree(req);
+ return NULL;
+ }
+ /* prevent from using desc. - set HOST BUSY */
+ dma_desc->status |= PCH_UDC_BS_HST_BSY;
+ dma_desc->dataptr = __constant_cpu_to_le32(DMA_ADDR_INVALID);
+ req->td_data = dma_desc;
+ req->td_data_last = dma_desc;
+ req->chain_len = 1;
+ return &req->req;
+}
+
+/**
+ * pch_udc_free_request() - This function frees request structure.
+ * It is called by gadget driver
+ * @usbep: Reference to the USB endpoint structure
+ * @usbreq: Reference to the USB request
+ */
+static void pch_udc_free_request(struct usb_ep *usbep,
+ struct usb_request *usbreq)
+{
+ struct pch_udc_ep *ep;
+ struct pch_udc_request *req;
+ struct pch_udc_dev *dev;
+
+ if (!usbep || !usbreq)
+ return;
+ ep = container_of(usbep, struct pch_udc_ep, ep);
+ req = container_of(usbreq, struct pch_udc_request, req);
+ dev = ep->dev;
+ if (!list_empty(&req->queue))
+ dev_err(&dev->pdev->dev, "%s: %s req=0x%p queue not empty\n",
+ __func__, usbep->name, req);
+ if (req->td_data != NULL) {
+ if (req->chain_len > 1)
+ pch_udc_free_dma_chain(ep->dev, req);
+ pci_pool_free(ep->dev->data_requests, req->td_data,
+ req->td_data_phys);
+ }
+ kfree(req);
+}
+
+/**
+ * pch_udc_pcd_queue() - This function queues a request packet. It is called
+ * by gadget driver
+ * @usbep: Reference to the USB endpoint structure
+ * @usbreq: Reference to the USB request
+ * @gfp: Flag to be used while mapping the data buffer
+ *
+ * Return codes:
+ * 0: Success
+ * linux error number: Failure
+ */
+static int pch_udc_pcd_queue(struct usb_ep *usbep, struct usb_request *usbreq,
+ gfp_t gfp)
+{
+ int retval = 0;
+ struct pch_udc_ep *ep;
+ struct pch_udc_dev *dev;
+ struct pch_udc_request *req;
+ unsigned long iflags;
+
+ if (!usbep || !usbreq || !usbreq->complete || !usbreq->buf)
+ return -EINVAL;
+ ep = container_of(usbep, struct pch_udc_ep, ep);
+ dev = ep->dev;
+ if (!ep->desc && ep->num)
+ return -EINVAL;
+ req = container_of(usbreq, struct pch_udc_request, req);
+ if (!list_empty(&req->queue))
+ return -EINVAL;
+ if (!dev->driver || (dev->gadget.speed == USB_SPEED_UNKNOWN))
+ return -ESHUTDOWN;
+ spin_lock_irqsave(&ep->dev->lock, iflags);
+ /* map the buffer for dma */
+ if (usbreq->length &&
+ ((usbreq->dma == DMA_ADDR_INVALID) || !usbreq->dma)) {
+ if (ep->in)
+ usbreq->dma = pci_map_single(dev->pdev, usbreq->buf,
+ usbreq->length, PCI_DMA_TODEVICE);
+ else
+ usbreq->dma = pci_map_single(dev->pdev, usbreq->buf,
+ usbreq->length, PCI_DMA_FROMDEVICE);
+ req->dma_mapped = 1;
+ }
+ if (usbreq->length > 0) {
+ retval = prepare_dma(ep, req, gfp);
+ if (retval)
+ goto probe_end;
+ }
+ usbreq->actual = 0;
+ usbreq->status = -EINPROGRESS;
+ req->dma_done = 0;
+ if (list_empty(&ep->queue) && !ep->halted) {
+ /* no pending transfer, so start this req */
+ if (!usbreq->length) {
+ process_zlp(ep, req);
+ retval = 0;
+ goto probe_end;
+ }
+ if (!ep->in) {
+ pch_udc_start_rxrequest(ep, req);
+ } else {
+ /*
+ * For IN trfr the descriptors will be programmed and
+ * P bit will be set when
+ * we get an IN token
+ */
+ pch_udc_wait_ep_stall(ep);
+ pch_udc_ep_clear_nak(ep);
+ pch_udc_enable_ep_interrupts(ep->dev, (1 << ep->num));
+ pch_udc_set_dma(dev, DMA_DIR_TX);
+ }
+ }
+ /* Now add this request to the ep's pending requests */
+ if (req != NULL)
+ list_add_tail(&req->queue, &ep->queue);
+
+probe_end:
+ spin_unlock_irqrestore(&dev->lock, iflags);
+ return retval;
+}
+
+/**
+ * pch_udc_pcd_dequeue() - This function de-queues a request packet.
+ * It is called by gadget driver
+ * @usbep: Reference to the USB endpoint structure
+ * @usbreq: Reference to the USB request
+ *
+ * Return codes:
+ * 0: Success
+ * linux error number: Failure
+ */
+static int pch_udc_pcd_dequeue(struct usb_ep *usbep,
+ struct usb_request *usbreq)
+{
+ struct pch_udc_ep *ep;
+ struct pch_udc_request *req;
+ struct pch_udc_dev *dev;
+ unsigned long flags;
+ int ret = -EINVAL;
+
+ ep = container_of(usbep, struct pch_udc_ep, ep);
+ dev = ep->dev;
+ if (!usbep || !usbreq || (!ep->desc && ep->num))
+ return ret;
+ req = container_of(usbreq, struct pch_udc_request, req);
+ spin_lock_irqsave(&ep->dev->lock, flags);
+ /* make sure it's still queued on this endpoint */
+ list_for_each_entry(req, &ep->queue, queue) {
+ if (&req->req == usbreq) {
+ pch_udc_ep_set_nak(ep);
+ if (!list_empty(&req->queue))
+ complete_req(ep, req, -ECONNRESET);
+ ret = 0;
+ break;
+ }
+ }
+ spin_unlock_irqrestore(&ep->dev->lock, flags);
+ return ret;
+}
+
+/**
+ * pch_udc_pcd_set_halt() - This function Sets or clear the endpoint halt
+ * feature
+ * @usbep: Reference to the USB endpoint structure
+ * @halt: Specifies whether to set or clear the feature
+ *
+ * Return codes:
+ * 0: Success
+ * linux error number: Failure
+ */
+static int pch_udc_pcd_set_halt(struct usb_ep *usbep, int halt)
+{
+ struct pch_udc_ep *ep;
+ struct pch_udc_dev *dev;
+ unsigned long iflags;
+ int ret;
+
+ if (!usbep)
+ return -EINVAL;
+ ep = container_of(usbep, struct pch_udc_ep, ep);
+ dev = ep->dev;
+ if (!ep->desc && !ep->num)
+ return -EINVAL;
+ if (!ep->dev->driver || (ep->dev->gadget.speed == USB_SPEED_UNKNOWN))
+ return -ESHUTDOWN;
+ spin_lock_irqsave(&udc_stall_spinlock, iflags);
+ if (list_empty(&ep->queue)) {
+ if (halt) {
+ if (ep->num == PCH_UDC_EP0)
+ ep->dev->stall = 1;
+ pch_udc_ep_set_stall(ep);
+ pch_udc_enable_ep_interrupts(ep->dev,
+ PCH_UDC_EPINT(ep->in,
+ ep->num));
+ } else {
+ pch_udc_ep_clear_stall(ep);
+ }
+ ret = 0;
+ } else {
+ ret = -EAGAIN;
+ }
+ spin_unlock_irqrestore(&udc_stall_spinlock, iflags);
+ return ret;
+}
+
+/**
+ * pch_udc_pcd_set_wedge() - This function Sets or clear the endpoint
+ * halt feature
+ * @usbep: Reference to the USB endpoint structure
+ * @halt: Specifies whether to set or clear the feature
+ *
+ * Return codes:
+ * 0: Success
+ * linux error number: Failure
+ */
+static int pch_udc_pcd_set_wedge(struct usb_ep *usbep)
+{
+ struct pch_udc_ep *ep;
+ struct pch_udc_dev *dev;
+ unsigned long iflags;
+ int ret;
+
+ if (!usbep)
+ return -EINVAL;
+ ep = container_of(usbep, struct pch_udc_ep, ep);
+ dev = ep->dev;
+ if (!ep->desc && !ep->num)
+ return -EINVAL;
+ if (!ep->dev->driver || (ep->dev->gadget.speed == USB_SPEED_UNKNOWN))
+ return -ESHUTDOWN;
+ spin_lock_irqsave(&udc_stall_spinlock, iflags);
+ if (!list_empty(&ep->queue)) {
+ ret = -EAGAIN;
+ } else {
+ if (ep->num == PCH_UDC_EP0)
+ ep->dev->stall = 1;
+ pch_udc_ep_set_stall(ep);
+ pch_udc_enable_ep_interrupts(ep->dev,
+ PCH_UDC_EPINT(ep->in, ep->num));
+ ep->dev->prot_stall = 1;
+ ret = 0;
+ }
+ spin_unlock_irqrestore(&udc_stall_spinlock, iflags);
+ return ret;
+}
+
+/**
+ * pch_udc_pcd_fifo_flush() - This function Flush the FIFO of specified endpoint
+ * @usbep: Reference to the USB endpoint structure
+ */
+static void pch_udc_pcd_fifo_flush(struct usb_ep *usbep)
+{
+ struct pch_udc_ep *ep;
+
+ if (!usbep)
+ return;
+
+ ep = container_of(usbep, struct pch_udc_ep, ep);
+ if (ep->desc || !ep->num)
+ pch_udc_ep_fifo_flush(ep, ep->in);
+}
+
+static const struct usb_ep_ops pch_udc_ep_ops = {
+ .enable = pch_udc_pcd_ep_enable,
+ .disable = pch_udc_pcd_ep_disable,
+ .alloc_request = pch_udc_alloc_request,
+ .free_request = pch_udc_free_request,
+ .queue = pch_udc_pcd_queue,
+ .dequeue = pch_udc_pcd_dequeue,
+ .set_halt = pch_udc_pcd_set_halt,
+ .set_wedge = pch_udc_pcd_set_wedge,
+ .fifo_status = NULL,
+ .fifo_flush = pch_udc_pcd_fifo_flush,
+};
+
+/**
+ * pch_udc_init_setup_buff() - This function initializes the SETUP buffer
+ * @td_stp: Reference to the SETP buffer structure
+ */
+static void pch_udc_init_setup_buff(struct pch_udc_stp_dma_desc *td_stp)
+{
+ static u32 pky_marker;
+
+ if (!td_stp)
+ return;
+ td_stp->reserved = ++pky_marker;
+ memset(&td_stp->request, 0xFF, sizeof td_stp->request);
+ td_stp->status = PCH_UDC_BS_HST_RDY;
+}
+
+/**
+ * pch_udc_start_next_txrequest() - This function starts
+ * the next transmission requirement
+ * @ep: Reference to the endpoint structure
+ */
+static void pch_udc_start_next_txrequest(struct pch_udc_ep *ep)
+{
+ struct pch_udc_request *req;
+ struct pch_udc_data_dma_desc *td_data;
+
+ if (pch_udc_read_ep_control(ep) & UDC_EPCTL_P)
+ return;
+
+ if (list_empty(&ep->queue))
+ return;
+
+ /* next request */
+ req = list_entry(ep->queue.next, struct pch_udc_request, queue);
+ if (req->dma_going)
+ return;
+ if (!req->td_data)
+ return;
+ pch_udc_wait_ep_stall(ep);
+ req->dma_going = 1;
+ pch_udc_ep_set_ddptr(ep, 0);
+ td_data = req->td_data;
+ while (1) {
+ td_data->status = (td_data->status & ~PCH_UDC_BUFF_STS) |
+ PCH_UDC_BS_HST_RDY;
+ if ((td_data->status & PCH_UDC_DMA_LAST) == PCH_UDC_DMA_LAST)
+ break;
+ td_data = phys_to_virt(td_data->next);
+ }
+ pch_udc_ep_set_ddptr(ep, req->td_data_phys);
+ pch_udc_set_dma(ep->dev, DMA_DIR_TX);
+ pch_udc_ep_set_pd(ep);
+ pch_udc_enable_ep_interrupts(ep->dev, PCH_UDC_EPINT(ep->in, ep->num));
+ pch_udc_ep_clear_nak(ep);
+}
+
+/**
+ * pch_udc_complete_transfer() - This function completes a transfer
+ * @ep: Reference to the endpoint structure
+ */
+static void pch_udc_complete_transfer(struct pch_udc_ep *ep)
+{
+ struct pch_udc_request *req;
+ struct pch_udc_dev *dev = ep->dev;
+
+ if (list_empty(&ep->queue))
+ return;
+ req = list_entry(ep->queue.next, struct pch_udc_request, queue);
+ if ((req->td_data_last->status & PCH_UDC_BUFF_STS) !=
+ PCH_UDC_BS_DMA_DONE)
+ return;
+ if ((req->td_data_last->status & PCH_UDC_RXTX_STS) !=
+ PCH_UDC_RTS_SUCC) {
+ dev_err(&dev->pdev->dev, "Invalid RXTX status (0x%08x) "
+ "epstatus=0x%08x\n",
+ (req->td_data_last->status & PCH_UDC_RXTX_STS),
+ (int)(ep->epsts));
+ return;
+ }
+
+ req->req.actual = req->req.length;
+ req->td_data_last->status = PCH_UDC_BS_HST_BSY | PCH_UDC_DMA_LAST;
+ req->td_data->status = PCH_UDC_BS_HST_BSY | PCH_UDC_DMA_LAST;
+ complete_req(ep, req, 0);
+ req->dma_going = 0;
+ if (!list_empty(&ep->queue)) {
+ pch_udc_wait_ep_stall(ep);
+ pch_udc_ep_clear_nak(ep);
+ pch_udc_enable_ep_interrupts(ep->dev,
+ PCH_UDC_EPINT(ep->in, ep->num));
+ } else {
+ pch_udc_disable_ep_interrupts(ep->dev,
+ PCH_UDC_EPINT(ep->in, ep->num));
+ }
+}
+
+/**
+ * pch_udc_complete_receiver() - This function completes a receiver
+ * @ep: Reference to the endpoint structure
+ */
+static void pch_udc_complete_receiver(struct pch_udc_ep *ep)
+{
+ struct pch_udc_request *req;
+ struct pch_udc_dev *dev = ep->dev;
+ unsigned int count;
+
+ if (list_empty(&ep->queue))
+ return;
+
+ /* next request */
+ req = list_entry(ep->queue.next, struct pch_udc_request, queue);
+ if ((req->td_data_last->status & PCH_UDC_BUFF_STS) !=
+ PCH_UDC_BS_DMA_DONE)
+ return;
+ pch_udc_clear_dma(ep->dev, DMA_DIR_RX);
+ if ((req->td_data_last->status & PCH_UDC_RXTX_STS) !=
+ PCH_UDC_RTS_SUCC) {
+ dev_err(&dev->pdev->dev, "Invalid RXTX status (0x%08x) "
+ "epstatus=0x%08x\n",
+ (req->td_data_last->status & PCH_UDC_RXTX_STS),
+ (int)(ep->epsts));
+ return;
+ }
+ count = req->td_data_last->status & PCH_UDC_RXTX_BYTES;
+
+ /* on 64k packets the RXBYTES field is zero */
+ if (!count && (req->req.length == UDC_DMA_MAXPACKET))
+ count = UDC_DMA_MAXPACKET;
+ req->td_data->status |= PCH_UDC_DMA_LAST;
+ req->td_data_last->status |= PCH_UDC_BS_HST_BSY;
+
+ req->dma_going = 0;
+ req->req.actual = count;
+ complete_req(ep, req, 0);
+ /* If there is a new/failed requests try that now */
+ if (!list_empty(&ep->queue)) {
+ req = list_entry(ep->queue.next, struct pch_udc_request, queue);
+ pch_udc_start_rxrequest(ep, req);
+ }
+}
+
+/**
+ * pch_udc_svc_data_in() - This function process endpoint interrupts
+ * for IN endpoints
+ * @dev: Reference to the device structure
+ * @ep_num: Endpoint that generated the interrupt
+ */
+static void pch_udc_svc_data_in(struct pch_udc_dev *dev, int ep_num)
+{
+ u32 epsts;
+ struct pch_udc_ep *ep;
+
+ ep = &dev->ep[2*ep_num];
+ epsts = ep->epsts;
+ ep->epsts = 0;
+
+ if (!(epsts & (UDC_EPSTS_IN | UDC_EPSTS_BNA | UDC_EPSTS_HE |
+ UDC_EPSTS_TDC | UDC_EPSTS_RCS | UDC_EPSTS_TXEMPTY |
+ UDC_EPSTS_RSS | UDC_EPSTS_XFERDONE)))
+ return;
+ if ((epsts & UDC_EPSTS_BNA))
+ return;
+ if (epsts & UDC_EPSTS_HE)
+ return;
+ if (epsts & UDC_EPSTS_RSS) {
+ pch_udc_ep_set_stall(ep);
+ pch_udc_enable_ep_interrupts(ep->dev,
+ PCH_UDC_EPINT(ep->in, ep->num));
+ }
+ if (epsts & UDC_EPSTS_RCS) {
+ if (!dev->prot_stall) {
+ pch_udc_ep_clear_stall(ep);
+ } else {
+ pch_udc_ep_set_stall(ep);
+ pch_udc_enable_ep_interrupts(ep->dev,
+ PCH_UDC_EPINT(ep->in, ep->num));
+ }
+ }
+ if (epsts & UDC_EPSTS_TDC)
+ pch_udc_complete_transfer(ep);
+ /* On IN interrupt, provide data if we have any */
+ if ((epsts & UDC_EPSTS_IN) && !(epsts & UDC_EPSTS_RSS) &&
+ !(epsts & UDC_EPSTS_TDC) && !(epsts & UDC_EPSTS_TXEMPTY))
+ pch_udc_start_next_txrequest(ep);
+}
+
+/**
+ * pch_udc_svc_data_out() - Handles interrupts from OUT endpoint
+ * @dev: Reference to the device structure
+ * @ep_num: Endpoint that generated the interrupt
+ */
+static void pch_udc_svc_data_out(struct pch_udc_dev *dev, int ep_num)
+{
+ u32 epsts;
+ struct pch_udc_ep *ep;
+ struct pch_udc_request *req = NULL;
+
+ ep = &dev->ep[2*ep_num + 1];
+ epsts = ep->epsts;
+ ep->epsts = 0;
+
+ if ((epsts & UDC_EPSTS_BNA) && (!list_empty(&ep->queue))) {
+ /* next request */
+ req = list_entry(ep->queue.next, struct pch_udc_request,
+ queue);
+ if ((req->td_data_last->status & PCH_UDC_BUFF_STS) !=
+ PCH_UDC_BS_DMA_DONE) {
+ if (!req->dma_going)
+ pch_udc_start_rxrequest(ep, req);
+ return;
+ }
+ }
+ if (epsts & UDC_EPSTS_HE)
+ return;
+ if (epsts & UDC_EPSTS_RSS)
+ pch_udc_ep_set_stall(ep);
+ pch_udc_enable_ep_interrupts(ep->dev,
+ PCH_UDC_EPINT(ep->in, ep->num));
+ if (epsts & UDC_EPSTS_RCS) {
+ if (!dev->prot_stall) {
+ pch_udc_ep_clear_stall(ep);
+ } else {
+ pch_udc_ep_set_stall(ep);
+ pch_udc_enable_ep_interrupts(ep->dev,
+ PCH_UDC_EPINT(ep->in, ep->num));
+ }
+ }
+ if (((epsts & UDC_EPSTS_OUT_MASK) >> UDC_EPSTS_OUT_SHIFT) ==
+ UDC_EPSTS_OUT_DATA) {
+ if (ep->dev->prot_stall == 1) {
+ pch_udc_ep_set_stall(ep);
+ pch_udc_enable_ep_interrupts(ep->dev,
+ PCH_UDC_EPINT(ep->in, ep->num));
+ } else {
+ pch_udc_complete_receiver(ep);
+ }
+ }
+ if (list_empty(&ep->queue))
+ pch_udc_set_dma(dev, DMA_DIR_RX);
+}
+
+/**
+ * pch_udc_svc_control_in() - Handle Control IN endpoint interrupts
+ * @dev: Reference to the device structure
+ */
+static void pch_udc_svc_control_in(struct pch_udc_dev *dev)
+{
+ u32 epsts;
+ struct pch_udc_ep *ep;
+
+ ep = &dev->ep[UDC_EP0IN_IDX];
+ epsts = ep->epsts;
+ ep->epsts = 0;
+
+ if (!(epsts & (UDC_EPSTS_IN | UDC_EPSTS_BNA | UDC_EPSTS_HE |
+ UDC_EPSTS_TDC | UDC_EPSTS_RCS | UDC_EPSTS_TXEMPTY |
+ UDC_EPSTS_XFERDONE)))
+ return;
+ if ((epsts & UDC_EPSTS_BNA))
+ return;
+ if (epsts & UDC_EPSTS_HE)
+ return;
+ if ((epsts & UDC_EPSTS_TDC) && (!dev->stall))
+ pch_udc_complete_transfer(ep);
+ /* On IN interrupt, provide data if we have any */
+ if ((epsts & UDC_EPSTS_IN) && !(epsts & UDC_EPSTS_TDC) &&
+ !(epsts & UDC_EPSTS_TXEMPTY))
+ pch_udc_start_next_txrequest(ep);
+}
+
+/**
+ * pch_udc_svc_control_out() - Routine that handle Control
+ * OUT endpoint interrupts
+ * @dev: Reference to the device structure
+ */
+static void pch_udc_svc_control_out(struct pch_udc_dev *dev)
+{
+ u32 stat;
+ int setup_supported;
+ struct pch_udc_ep *ep;
+
+ ep = &dev->ep[UDC_EP0OUT_IDX];
+ stat = ep->epsts;
+ ep->epsts = 0;
+
+ /* If setup data */
+ if (((stat & UDC_EPSTS_OUT_MASK) >> UDC_EPSTS_OUT_SHIFT) ==
+ UDC_EPSTS_OUT_SETUP) {
+ dev->stall = 0;
+ dev->ep[UDC_EP0IN_IDX].halted = 0;
+ dev->ep[UDC_EP0OUT_IDX].halted = 0;
+ /* In data not ready */
+ pch_udc_ep_set_nak(&(dev->ep[UDC_EP0IN_IDX]));
+ dev->setup_data = ep->td_stp->request;
+ pch_udc_init_setup_buff(ep->td_stp);
+ pch_udc_clear_dma(dev, DMA_DIR_TX);
+ pch_udc_ep_fifo_flush(&(dev->ep[UDC_EP0IN_IDX]),
+ dev->ep[UDC_EP0IN_IDX].in);
+ if ((dev->setup_data.bRequestType & USB_DIR_IN))
+ dev->gadget.ep0 = &dev->ep[UDC_EP0IN_IDX].ep;
+ else /* OUT */
+ dev->gadget.ep0 = &ep->ep;
+ spin_unlock(&dev->lock);
+ /* If Mass storage Reset */
+ if ((dev->setup_data.bRequestType == 0x21) &&
+ (dev->setup_data.bRequest == 0xFF))
+ dev->prot_stall = 0;
+ /* call gadget with setup data received */
+ setup_supported = dev->driver->setup(&dev->gadget,
+ &dev->setup_data);
+ spin_lock(&dev->lock);
+ /* ep0 in returns data on IN phase */
+ if (setup_supported >= 0 && setup_supported <
+ UDC_EP0IN_MAX_PKT_SIZE) {
+ pch_udc_ep_clear_nak(&(dev->ep[UDC_EP0IN_IDX]));
+ /* Gadget would have queued a request when
+ * we called the setup */
+ pch_udc_set_dma(dev, DMA_DIR_RX);
+ pch_udc_ep_clear_nak(ep);
+ } else if (setup_supported < 0) {
+ /* if unsupported request, then stall */
+ pch_udc_ep_set_stall(&(dev->ep[UDC_EP0IN_IDX]));
+ pch_udc_enable_ep_interrupts(ep->dev,
+ PCH_UDC_EPINT(ep->in, ep->num));
+ dev->stall = 0;
+ pch_udc_set_dma(dev, DMA_DIR_RX);
+ } else {
+ dev->waiting_zlp_ack = 1;
+ }
+ } else if ((((stat & UDC_EPSTS_OUT_MASK) >> UDC_EPSTS_OUT_SHIFT) ==
+ UDC_EPSTS_OUT_DATA) && !dev->stall) {
+ if (list_empty(&ep->queue)) {
+ dev_err(&dev->pdev->dev, "%s: No request\n", __func__);
+ ep->td_data->status = (ep->td_data->status &
+ ~PCH_UDC_BUFF_STS) |
+ PCH_UDC_BS_HST_RDY;
+ pch_udc_set_dma(dev, DMA_DIR_RX);
+ } else {
+ /* control write */
+ /* next function will pickuo an clear the status */
+ ep->epsts = stat;
+
+ pch_udc_svc_data_out(dev, 0);
+ /* re-program desc. pointer for possible ZLPs */
+ pch_udc_ep_set_ddptr(ep, ep->td_data_phys);
+ pch_udc_set_dma(dev, DMA_DIR_RX);
+ }
+ }
+ pch_udc_ep_set_rrdy(ep);
+}
+
+
+/**
+ * pch_udc_postsvc_epinters() - This function enables end point interrupts
+ * and clears NAK status
+ * @dev: Reference to the device structure
+ * @ep_num: End point number
+ */
+static void pch_udc_postsvc_epinters(struct pch_udc_dev *dev, int ep_num)
+{
+ struct pch_udc_ep *ep;
+ struct pch_udc_request *req;
+
+ ep = &dev->ep[2*ep_num];
+ if (!list_empty(&ep->queue)) {
+ req = list_entry(ep->queue.next, struct pch_udc_request, queue);
+ pch_udc_enable_ep_interrupts(ep->dev,
+ PCH_UDC_EPINT(ep->in, ep->num));
+ pch_udc_ep_clear_nak(ep);
+ }
+}
+
+/**
+ * pch_udc_read_all_epstatus() - This function read all endpoint status
+ * @dev: Reference to the device structure
+ * @ep_intr: Status of endpoint interrupt
+ */
+static void pch_udc_read_all_epstatus(struct pch_udc_dev *dev, u32 ep_intr)
+{
+ int i;
+ struct pch_udc_ep *ep;
+
+ for (i = 0; i < PCH_UDC_USED_EP_NUM; i++) {
+ /* IN */
+ if (ep_intr & (0x1 << i)) {
+ ep = &dev->ep[2*i];
+ ep->epsts = pch_udc_read_ep_status(ep);
+ pch_udc_clear_ep_status(ep, ep->epsts);
+ }
+ /* OUT */
+ if (ep_intr & (0x10000 << i)) {
+ ep = &dev->ep[2*i+1];
+ ep->epsts = pch_udc_read_ep_status(ep);
+ pch_udc_clear_ep_status(ep, ep->epsts);
+ }
+ }
+}
+
+/**
+ * pch_udc_activate_control_ep() - This function enables the control endpoints
+ * for traffic after a reset
+ * @dev: Reference to the device structure
+ */
+static void pch_udc_activate_control_ep(struct pch_udc_dev *dev)
+{
+ struct pch_udc_ep *ep;
+ u32 val;
+
+ /* Setup the IN endpoint */
+ ep = &dev->ep[UDC_EP0IN_IDX];
+ pch_udc_clear_ep_control(ep);
+ pch_udc_ep_fifo_flush(ep, ep->in);
+ pch_udc_ep_set_bufsz(ep, UDC_EP0IN_BUFF_SIZE, ep->in);
+ pch_udc_ep_set_maxpkt(ep, UDC_EP0IN_MAX_PKT_SIZE);
+ /* Initialize the IN EP Descriptor */
+ ep->td_data = NULL;
+ ep->td_stp = NULL;
+ ep->td_data_phys = 0;
+ ep->td_stp_phys = 0;
+
+ /* Setup the OUT endpoint */
+ ep = &dev->ep[UDC_EP0OUT_IDX];
+ pch_udc_clear_ep_control(ep);
+ pch_udc_ep_fifo_flush(ep, ep->in);
+ pch_udc_ep_set_bufsz(ep, UDC_EP0OUT_BUFF_SIZE, ep->in);
+ pch_udc_ep_set_maxpkt(ep, UDC_EP0OUT_MAX_PKT_SIZE);
+ val = UDC_EP0OUT_MAX_PKT_SIZE << UDC_CSR_NE_MAX_PKT_SHIFT;
+ pch_udc_write_csr(ep->dev, val, UDC_EP0OUT_IDX);
+
+ /* Initialize the SETUP buffer */
+ pch_udc_init_setup_buff(ep->td_stp);
+ /* Write the pointer address of dma descriptor */
+ pch_udc_ep_set_subptr(ep, ep->td_stp_phys);
+ /* Write the pointer address of Setup descriptor */
+ pch_udc_ep_set_ddptr(ep, ep->td_data_phys);
+
+ /* Initialize the dma descriptor */
+ ep->td_data->status = PCH_UDC_DMA_LAST;
+ ep->td_data->dataptr = dev->dma_addr;
+ ep->td_data->next = ep->td_data_phys;
+
+ pch_udc_ep_clear_nak(ep);
+}
+
+
+/**
+ * pch_udc_svc_ur_interrupt() - This function handles a USB reset interrupt
+ * @dev: Reference to driver structure
+ */
+static void pch_udc_svc_ur_interrupt(struct pch_udc_dev *dev)
+{
+ struct pch_udc_ep *ep;
+ int i;
+
+ pch_udc_clear_dma(dev, DMA_DIR_TX);
+ pch_udc_clear_dma(dev, DMA_DIR_RX);
+ /* Mask all endpoint interrupts */
+ pch_udc_disable_ep_interrupts(dev, UDC_EPINT_MSK_DISABLE_ALL);
+ /* clear all endpoint interrupts */
+ pch_udc_write_ep_interrupts(dev, UDC_EPINT_MSK_DISABLE_ALL);
+
+ for (i = 0; i < PCH_UDC_EP_NUM; i++) {
+ ep = &dev->ep[i];
+ pch_udc_clear_ep_status(ep, UDC_EPSTS_ALL_CLR_MASK);
+ pch_udc_clear_ep_control(ep);
+ pch_udc_ep_set_ddptr(ep, 0);
+ pch_udc_write_csr(ep->dev, 0x00, i);
+ }
+ dev->stall = 0;
+ dev->prot_stall = 0;
+ dev->waiting_zlp_ack = 0;
+ dev->set_cfg_not_acked = 0;
+
+ /* disable ep to empty req queue. Skip the control EP's */
+ for (i = 0; i < (PCH_UDC_USED_EP_NUM*2); i++) {
+ ep = &dev->ep[i];
+ pch_udc_ep_set_nak(ep);
+ pch_udc_ep_fifo_flush(ep, ep->in);
+ /* Complete request queue */
+ empty_req_queue(ep);
+ }
+ if (dev->driver && dev->driver->disconnect)
+ dev->driver->disconnect(&dev->gadget);
+}
+
+/**
+ * pch_udc_svc_enum_interrupt() - This function handles a USB speed enumeration
+ * done interrupt
+ * @dev: Reference to driver structure
+ */
+static void pch_udc_svc_enum_interrupt(struct pch_udc_dev *dev)
+{
+ u32 dev_stat, dev_speed;
+ u32 speed = USB_SPEED_FULL;
+
+ dev_stat = pch_udc_read_device_status(dev);
+ dev_speed = (dev_stat & UDC_DEVSTS_ENUM_SPEED_MASK) >>
+ UDC_DEVSTS_ENUM_SPEED_SHIFT;
+ switch (dev_speed) {
+ case UDC_DEVSTS_ENUM_SPEED_HIGH:
+ speed = USB_SPEED_HIGH;
+ break;
+ case UDC_DEVSTS_ENUM_SPEED_FULL:
+ speed = USB_SPEED_FULL;
+ break;
+ case UDC_DEVSTS_ENUM_SPEED_LOW:
+ speed = USB_SPEED_LOW;
+ break;
+ default:
+ BUG();
+ }
+ dev->gadget.speed = speed;
+ pch_udc_activate_control_ep(dev);
+ pch_udc_enable_ep_interrupts(dev, UDC_EPINT_IN_EP0 | UDC_EPINT_OUT_EP0);
+ pch_udc_set_dma(dev, DMA_DIR_TX);
+ pch_udc_set_dma(dev, DMA_DIR_RX);
+ pch_udc_ep_set_rrdy(&(dev->ep[UDC_EP0OUT_IDX]));
+}
+
+/**
+ * pch_udc_svc_intf_interrupt() - This function handles a set interface
+ * interrupt
+ * @dev: Reference to driver structure
+ */
+static void pch_udc_svc_intf_interrupt(struct pch_udc_dev *dev)
+{
+ u32 reg, dev_stat = 0;
+ int i, ret;
+
+ dev_stat = pch_udc_read_device_status(dev);
+ dev->cfg_data.cur_intf = (dev_stat & UDC_DEVSTS_INTF_MASK) >>
+ UDC_DEVSTS_INTF_SHIFT;
+ dev->cfg_data.cur_alt = (dev_stat & UDC_DEVSTS_ALT_MASK) >>
+ UDC_DEVSTS_ALT_SHIFT;
+ dev->set_cfg_not_acked = 1;
+ /* Construct the usb request for gadget driver and inform it */
+ memset(&dev->setup_data, 0 , sizeof dev->setup_data);
+ dev->setup_data.bRequest = USB_REQ_SET_INTERFACE;
+ dev->setup_data.bRequestType = USB_RECIP_INTERFACE;
+ dev->setup_data.wValue = cpu_to_le16(dev->cfg_data.cur_alt);
+ dev->setup_data.wIndex = cpu_to_le16(dev->cfg_data.cur_intf);
+ /* programm the Endpoint Cfg registers */
+ /* Only one end point cfg register */
+ reg = pch_udc_read_csr(dev, UDC_EP0OUT_IDX);
+ reg = (reg & ~UDC_CSR_NE_INTF_MASK) |
+ (dev->cfg_data.cur_intf << UDC_CSR_NE_INTF_SHIFT);
+ reg = (reg & ~UDC_CSR_NE_ALT_MASK) |
+ (dev->cfg_data.cur_alt << UDC_CSR_NE_ALT_SHIFT);
+ pch_udc_write_csr(dev, reg, UDC_EP0OUT_IDX);
+ for (i = 0; i < PCH_UDC_USED_EP_NUM * 2; i++) {
+ /* clear stall bits */
+ pch_udc_ep_clear_stall(&(dev->ep[i]));
+ dev->ep[i].halted = 0;
+ }
+ dev->stall = 0;
+ spin_unlock(&dev->lock);
+ ret = dev->driver->setup(&dev->gadget, &dev->setup_data);
+ spin_lock(&dev->lock);
+}
+
+/**
+ * pch_udc_svc_cfg_interrupt() - This function handles a set configuration
+ * interrupt
+ * @dev: Reference to driver structure
+ */
+static void pch_udc_svc_cfg_interrupt(struct pch_udc_dev *dev)
+{
+ int i, ret;
+ u32 reg, dev_stat = 0;
+
+ dev_stat = pch_udc_read_device_status(dev);
+ dev->set_cfg_not_acked = 1;
+ dev->cfg_data.cur_cfg = (dev_stat & UDC_DEVSTS_CFG_MASK) >>
+ UDC_DEVSTS_CFG_SHIFT;
+ /* make usb request for gadget driver */
+ memset(&dev->setup_data, 0 , sizeof dev->setup_data);
+ dev->setup_data.bRequest = USB_REQ_SET_CONFIGURATION;
+ dev->setup_data.wValue = cpu_to_le16(dev->cfg_data.cur_cfg);
+ /* program the NE registers */
+ /* Only one end point cfg register */
+ reg = pch_udc_read_csr(dev, UDC_EP0OUT_IDX);
+ reg = (reg & ~UDC_CSR_NE_CFG_MASK) |
+ (dev->cfg_data.cur_cfg << UDC_CSR_NE_CFG_SHIFT);
+ pch_udc_write_csr(dev, reg, UDC_EP0OUT_IDX);
+ for (i = 0; i < PCH_UDC_USED_EP_NUM * 2; i++) {
+ /* clear stall bits */
+ pch_udc_ep_clear_stall(&(dev->ep[i]));
+ dev->ep[i].halted = 0;
+ }
+ dev->stall = 0;
+
+ /* call gadget zero with setup data received */
+ spin_unlock(&dev->lock);
+ ret = dev->driver->setup(&dev->gadget, &dev->setup_data);
+ spin_lock(&dev->lock);
+}
+
+/**
+ * pch_udc_dev_isr() - This function services device interrupts
+ * by invoking appropriate routines.
+ * @dev: Reference to the device structure
+ * @dev_intr: The Device interrupt status.
+ */
+static void pch_udc_dev_isr(struct pch_udc_dev *dev, u32 dev_intr)
+{
+ /* USB Reset Interrupt */
+ if (dev_intr & UDC_DEVINT_UR)
+ pch_udc_svc_ur_interrupt(dev);
+ /* Enumeration Done Interrupt */
+ if (dev_intr & UDC_DEVINT_ENUM)
+ pch_udc_svc_enum_interrupt(dev);
+ /* Set Interface Interrupt */
+ if (dev_intr & UDC_DEVINT_SI)
+ pch_udc_svc_intf_interrupt(dev);
+ /* Set Config Interrupt */
+ if (dev_intr & UDC_DEVINT_SC)
+ pch_udc_svc_cfg_interrupt(dev);
+ /* USB Suspend interrupt */
+ if (dev_intr & UDC_DEVINT_US)
+ dev_dbg(&dev->pdev->dev, "USB_SUSPEND\n");
+ /* Clear the SOF interrupt, if enabled */
+ if (dev_intr & UDC_DEVINT_SOF)
+ dev_dbg(&dev->pdev->dev, "SOF\n");
+ /* ES interrupt, IDLE > 3ms on the USB */
+ if (dev_intr & UDC_DEVINT_ES)
+ dev_dbg(&dev->pdev->dev, "ES\n");
+ /* RWKP interrupt */
+ if (dev_intr & UDC_DEVINT_RWKP)
+ dev_dbg(&dev->pdev->dev, "RWKP\n");
+}
+
+/**
+ * pch_udc_isr() - This function handles interrupts from the PCH USB Device
+ * @irq: Interrupt request number
+ * @dev: Reference to the device structure
+ */
+static irqreturn_t pch_udc_isr(int irq, void *pdev)
+{
+ struct pch_udc_dev *dev = (struct pch_udc_dev *) pdev;
+ u32 dev_intr, ep_intr;
+ int i;
+
+ dev_intr = pch_udc_read_device_interrupts(dev);
+ ep_intr = pch_udc_read_ep_interrupts(dev);
+
+ if (dev_intr)
+ /* Clear device interrupts */
+ pch_udc_write_device_interrupts(dev, dev_intr);
+ if (ep_intr)
+ /* Clear ep interrupts */
+ pch_udc_write_ep_interrupts(dev, ep_intr);
+ if (!dev_intr && !ep_intr)
+ return IRQ_NONE;
+ spin_lock(&dev->lock);
+ if (dev_intr)
+ pch_udc_dev_isr(dev, dev_intr);
+ if (ep_intr) {
+ pch_udc_read_all_epstatus(dev, ep_intr);
+ /* Process Control In interrupts, if present */
+ if (ep_intr & UDC_EPINT_IN_EP0) {
+ pch_udc_svc_control_in(dev);
+ pch_udc_postsvc_epinters(dev, 0);
+ }
+ /* Process Control Out interrupts, if present */
+ if (ep_intr & UDC_EPINT_OUT_EP0)
+ pch_udc_svc_control_out(dev);
+ /* Process data in end point interrupts */
+ for (i = 1; i < PCH_UDC_USED_EP_NUM; i++) {
+ if (ep_intr & (1 << i)) {
+ pch_udc_svc_data_in(dev, i);
+ pch_udc_postsvc_epinters(dev, i);
+ }
+ }
+ /* Process data out end point interrupts */
+ for (i = UDC_EPINT_OUT_SHIFT + 1; i < (UDC_EPINT_OUT_SHIFT +
+ PCH_UDC_USED_EP_NUM); i++)
+ if (ep_intr & (1 << i))
+ pch_udc_svc_data_out(dev, i -
+ UDC_EPINT_OUT_SHIFT);
+ }
+ spin_unlock(&dev->lock);
+ return IRQ_HANDLED;
+}
+
+/**
+ * pch_udc_setup_ep0() - This function enables control endpoint for traffic
+ * @dev: Reference to the device structure
+ */
+static void pch_udc_setup_ep0(struct pch_udc_dev *dev)
+{
+ /* enable ep0 interrupts */
+ pch_udc_enable_ep_interrupts(dev, UDC_EPINT_IN_EP0 |
+ UDC_EPINT_OUT_EP0);
+ /* enable device interrupts */
+ pch_udc_enable_interrupts(dev, UDC_DEVINT_UR | UDC_DEVINT_US |
+ UDC_DEVINT_ES | UDC_DEVINT_ENUM |
+ UDC_DEVINT_SI | UDC_DEVINT_SC);
+}
+
+/**
+ * gadget_release() - Free the gadget driver private data
+ * @pdev reference to struct pci_dev
+ */
+static void gadget_release(struct device *pdev)
+{
+ struct pch_udc_dev *dev = dev_get_drvdata(pdev);
+
+ kfree(dev);
+}
+
+/**
+ * pch_udc_pcd_reinit() - This API initializes the endpoint structures
+ * @dev: Reference to the driver structure
+ */
+static void pch_udc_pcd_reinit(struct pch_udc_dev *dev)
+{
+ const char *const ep_string[] = {
+ ep0_string, "ep0out", "ep1in", "ep1out", "ep2in", "ep2out",
+ "ep3in", "ep3out", "ep4in", "ep4out", "ep5in", "ep5out",
+ "ep6in", "ep6out", "ep7in", "ep7out", "ep8in", "ep8out",
+ "ep9in", "ep9out", "ep10in", "ep10out", "ep11in", "ep11out",
+ "ep12in", "ep12out", "ep13in", "ep13out", "ep14in", "ep14out",
+ "ep15in", "ep15out",
+ };
+ int i;
+
+ dev->gadget.speed = USB_SPEED_UNKNOWN;
+ INIT_LIST_HEAD(&dev->gadget.ep_list);
+
+ /* Initialize the endpoints structures */
+ memset(dev->ep, 0, sizeof dev->ep);
+ for (i = 0; i < PCH_UDC_EP_NUM; i++) {
+ struct pch_udc_ep *ep = &dev->ep[i];
+ ep->dev = dev;
+ ep->halted = 1;
+ ep->num = i / 2;
+ ep->in = ~i & 1;
+ ep->ep.name = ep_string[i];
+ ep->ep.ops = &pch_udc_ep_ops;
+ if (ep->in)
+ ep->offset_addr = ep->num * UDC_EP_REG_SHIFT;
+ else
+ ep->offset_addr = (UDC_EPINT_OUT_SHIFT + ep->num) *
+ UDC_EP_REG_SHIFT;
+ /* need to set ep->ep.maxpacket and set Default Configuration?*/
+ ep->ep.maxpacket = UDC_BULK_MAX_PKT_SIZE;
+ list_add_tail(&ep->ep.ep_list, &dev->gadget.ep_list);
+ INIT_LIST_HEAD(&ep->queue);
+ }
+ dev->ep[UDC_EP0IN_IDX].ep.maxpacket = UDC_EP0IN_MAX_PKT_SIZE;
+ dev->ep[UDC_EP0OUT_IDX].ep.maxpacket = UDC_EP0OUT_MAX_PKT_SIZE;
+
+ dev->dma_addr = pci_map_single(dev->pdev, dev->ep0out_buf, 256,
+ PCI_DMA_FROMDEVICE);
+
+ /* remove ep0 in and out from the list. They have own pointer */
+ list_del_init(&dev->ep[UDC_EP0IN_IDX].ep.ep_list);
+ list_del_init(&dev->ep[UDC_EP0OUT_IDX].ep.ep_list);
+
+ dev->gadget.ep0 = &dev->ep[UDC_EP0IN_IDX].ep;
+ INIT_LIST_HEAD(&dev->gadget.ep0->ep_list);
+}
+
+/**
+ * pch_udc_pcd_init() - This API initializes the driver structure
+ * @dev: Reference to the driver structure
+ *
+ * Return codes:
+ * 0: Success
+ */
+static int pch_udc_pcd_init(struct pch_udc_dev *dev)
+{
+ pch_udc_init(dev);
+ pch_udc_pcd_reinit(dev);
+ return 0;
+}
+
+/**
+ * init_dma_pools() - create dma pools during initialization
+ * @pdev: reference to struct pci_dev
+ */
+static int init_dma_pools(struct pch_udc_dev *dev)
+{
+ struct pch_udc_stp_dma_desc *td_stp;
+ struct pch_udc_data_dma_desc *td_data;
+
+ /* DMA setup */
+ dev->data_requests = pci_pool_create("data_requests", dev->pdev,
+ sizeof(struct pch_udc_data_dma_desc), 0, 0);
+ if (!dev->data_requests) {
+ dev_err(&dev->pdev->dev, "%s: can't get request data pool\n",
+ __func__);
+ return -ENOMEM;
+ }
+
+ /* dma desc for setup data */
+ dev->stp_requests = pci_pool_create("setup requests", dev->pdev,
+ sizeof(struct pch_udc_stp_dma_desc), 0, 0);
+ if (!dev->stp_requests) {
+ dev_err(&dev->pdev->dev, "%s: can't get setup request pool\n",
+ __func__);
+ return -ENOMEM;
+ }
+ /* setup */
+ td_stp = pci_pool_alloc(dev->stp_requests, GFP_KERNEL,
+ &dev->ep[UDC_EP0OUT_IDX].td_stp_phys);
+ if (!td_stp) {
+ dev_err(&dev->pdev->dev,
+ "%s: can't allocate setup dma descriptor\n", __func__);
+ return -ENOMEM;
+ }
+ dev->ep[UDC_EP0OUT_IDX].td_stp = td_stp;
+
+ /* data: 0 packets !? */
+ td_data = pci_pool_alloc(dev->data_requests, GFP_KERNEL,
+ &dev->ep[UDC_EP0OUT_IDX].td_data_phys);
+ if (!td_data) {
+ dev_err(&dev->pdev->dev,
+ "%s: can't allocate data dma descriptor\n", __func__);
+ return -ENOMEM;
+ }
+ dev->ep[UDC_EP0OUT_IDX].td_data = td_data;
+ dev->ep[UDC_EP0IN_IDX].td_stp = NULL;
+ dev->ep[UDC_EP0IN_IDX].td_stp_phys = 0;
+ dev->ep[UDC_EP0IN_IDX].td_data = NULL;
+ dev->ep[UDC_EP0IN_IDX].td_data_phys = 0;
+ return 0;
+}
+
+int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
+ int (*bind)(struct usb_gadget *))
+{
+ struct pch_udc_dev *dev = pch_udc;
+ int retval;
+
+ if (!driver || (driver->speed == USB_SPEED_UNKNOWN) || !bind ||
+ !driver->setup || !driver->unbind || !driver->disconnect) {
+ dev_err(&dev->pdev->dev,
+ "%s: invalid driver parameter\n", __func__);
+ return -EINVAL;
+ }
+
+ if (!dev)
+ return -ENODEV;
+
+ if (dev->driver) {
+ dev_err(&dev->pdev->dev, "%s: already bound\n", __func__);
+ return -EBUSY;
+ }
+ driver->driver.bus = NULL;
+ dev->driver = driver;
+ dev->gadget.dev.driver = &driver->driver;
+
+ /* Invoke the bind routine of the gadget driver */
+ retval = bind(&dev->gadget);
+
+ if (retval) {
+ dev_err(&dev->pdev->dev, "%s: binding to %s returning %d\n",
+ __func__, driver->driver.name, retval);
+ dev->driver = NULL;
+ dev->gadget.dev.driver = NULL;
+ return retval;
+ }
+ /* get ready for ep0 traffic */
+ pch_udc_setup_ep0(dev);
+
+ /* clear SD */
+ pch_udc_clear_disconnect(dev);
+
+ dev->connected = 1;
+ return 0;
+}
+EXPORT_SYMBOL(usb_gadget_probe_driver);
+
+int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
+{
+ struct pch_udc_dev *dev = pch_udc;
+
+ if (!dev)
+ return -ENODEV;
+
+ if (!driver || (driver != dev->driver)) {
+ dev_err(&dev->pdev->dev,
+ "%s: invalid driver parameter\n", __func__);
+ return -EINVAL;
+ }
+
+ pch_udc_disable_interrupts(dev, UDC_DEVINT_MSK);
+
+ /* Assues that there are no pending requets with this driver */
+ driver->unbind(&dev->gadget);
+ dev->gadget.dev.driver = NULL;
+ dev->driver = NULL;
+ dev->connected = 0;
+
+ /* set SD */
+ pch_udc_set_disconnect(dev);
+ return 0;
+}
+EXPORT_SYMBOL(usb_gadget_unregister_driver);
+
+static void pch_udc_shutdown(struct pci_dev *pdev)
+{
+ struct pch_udc_dev *dev = pci_get_drvdata(pdev);
+
+ pch_udc_disable_interrupts(dev, UDC_DEVINT_MSK);
+ pch_udc_disable_ep_interrupts(dev, UDC_EPINT_MSK_DISABLE_ALL);
+
+ /* disable the pullup so the host will think we're gone */
+ pch_udc_set_disconnect(dev);
+}
+
+static void pch_udc_remove(struct pci_dev *pdev)
+{
+ struct pch_udc_dev *dev = pci_get_drvdata(pdev);
+
+ /* gadget driver must not be registered */
+ if (dev->driver)
+ dev_err(&pdev->dev,
+ "%s: gadget driver still bound!!!\n", __func__);
+ /* dma pool cleanup */
+ if (dev->data_requests)
+ pci_pool_destroy(dev->data_requests);
+
+ if (dev->stp_requests) {
+ /* cleanup DMA desc's for ep0in */
+ if (dev->ep[UDC_EP0OUT_IDX].td_stp) {
+ pci_pool_free(dev->stp_requests,
+ dev->ep[UDC_EP0OUT_IDX].td_stp,
+ dev->ep[UDC_EP0OUT_IDX].td_stp_phys);
+ }
+ if (dev->ep[UDC_EP0OUT_IDX].td_data) {
+ pci_pool_free(dev->stp_requests,
+ dev->ep[UDC_EP0OUT_IDX].td_data,
+ dev->ep[UDC_EP0OUT_IDX].td_data_phys);
+ }
+ pci_pool_destroy(dev->stp_requests);
+ }
+
+ pch_udc_exit(dev);
+
+ if (dev->irq_registered)
+ free_irq(pdev->irq, dev);
+ if (dev->base_addr)
+ iounmap(dev->base_addr);
+ if (dev->mem_region)
+ release_mem_region(dev->phys_addr,
+ pci_resource_len(pdev, PCH_UDC_PCI_BAR));
+ if (dev->active)
+ pci_disable_device(pdev);
+ if (dev->registered)
+ device_unregister(&dev->gadget.dev);
+ kfree(dev);
+ pci_set_drvdata(pdev, NULL);
+}
+
+#ifdef CONFIG_PM
+static int pch_udc_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ struct pch_udc_dev *dev = pci_get_drvdata(pdev);
+
+ pch_udc_disable_interrupts(dev, UDC_DEVINT_MSK);
+ pch_udc_disable_ep_interrupts(dev, UDC_EPINT_MSK_DISABLE_ALL);
+
+ pci_disable_device(pdev);
+ pci_enable_wake(pdev, PCI_D3hot, 0);
+
+ if (pci_save_state(pdev)) {
+ dev_err(&pdev->dev,
+ "%s: could not save PCI config state\n", __func__);
+ return -ENOMEM;
+ }
+ pci_set_power_state(pdev, pci_choose_state(pdev, state));
+ return 0;
+}
+
+static int pch_udc_resume(struct pci_dev *pdev)
+{
+ int ret;
+
+ pci_set_power_state(pdev, PCI_D0);
+ ret = pci_restore_state(pdev);
+ if (ret) {
+ dev_err(&pdev->dev, "%s: pci_restore_state failed\n", __func__);
+ return ret;
+ }
+ ret = pci_enable_device(pdev);
+ if (ret) {
+ dev_err(&pdev->dev, "%s: pci_enable_device failed\n", __func__);
+ return ret;
+ }
+ pci_enable_wake(pdev, PCI_D3hot, 0);
+ return 0;
+}
+#else
+#define pch_udc_suspend NULL
+#define pch_udc_resume NULL
+#endif /* CONFIG_PM */
+
+static int pch_udc_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ unsigned long resource;
+ unsigned long len;
+ int retval;
+ struct pch_udc_dev *dev;
+
+ /* one udc only */
+ if (pch_udc) {
+ pr_err("%s: already probed\n", __func__);
+ return -EBUSY;
+ }
+ /* init */
+ dev = kzalloc(sizeof *dev, GFP_KERNEL);
+ if (!dev) {
+ pr_err("%s: no memory for device structure\n", __func__);
+ return -ENOMEM;
+ }
+ /* pci setup */
+ if (pci_enable_device(pdev) < 0) {
+ kfree(dev);
+ pr_err("%s: pci_enable_device failed\n", __func__);
+ return -ENODEV;
+ }
+ dev->active = 1;
+ pci_set_drvdata(pdev, dev);
+
+ /* PCI resource allocation */
+ resource = pci_resource_start(pdev, 1);
+ len = pci_resource_len(pdev, 1);
+
+ if (!request_mem_region(resource, len, KBUILD_MODNAME)) {
+ dev_err(&pdev->dev, "%s: pci device used already\n", __func__);
+ retval = -EBUSY;
+ goto finished;
+ }
+ dev->phys_addr = resource;
+ dev->mem_region = 1;
+
+ dev->base_addr = ioremap_nocache(resource, len);
+ if (!dev->base_addr) {
+ pr_err("%s: device memory cannot be mapped\n", __func__);
+ retval = -ENOMEM;
+ goto finished;
+ }
+ if (!pdev->irq) {
+ dev_err(&pdev->dev, "%s: irq not set\n", __func__);
+ retval = -ENODEV;
+ goto finished;
+ }
+ pch_udc = dev;
+ /* initialize the hardware */
+ if (pch_udc_pcd_init(dev))
+ goto finished;
+ if (request_irq(pdev->irq, pch_udc_isr, IRQF_SHARED, KBUILD_MODNAME,
+ dev)) {
+ dev_err(&pdev->dev, "%s: request_irq(%d) fail\n", __func__,
+ pdev->irq);
+ retval = -ENODEV;
+ goto finished;
+ }
+ dev->irq = pdev->irq;
+ dev->irq_registered = 1;
+
+ pci_set_master(pdev);
+ pci_try_set_mwi(pdev);
+
+ /* device struct setup */
+ spin_lock_init(&dev->lock);
+ dev->pdev = pdev;
+ dev->gadget.ops = &pch_udc_ops;
+
+ retval = init_dma_pools(dev);
+ if (retval)
+ goto finished;
+
+ dev_set_name(&dev->gadget.dev, "gadget");
+ dev->gadget.dev.parent = &pdev->dev;
+ dev->gadget.dev.dma_mask = pdev->dev.dma_mask;
+ dev->gadget.dev.release = gadget_release;
+ dev->gadget.name = KBUILD_MODNAME;
+ dev->gadget.is_dualspeed = 1;
+
+ retval = device_register(&dev->gadget.dev);
+ if (retval)
+ goto finished;
+ dev->registered = 1;
+
+ /* Put the device in disconnected state till a driver is bound */
+ pch_udc_set_disconnect(dev);
+ return 0;
+
+finished:
+ pch_udc_remove(pdev);
+ return retval;
+}
+
+static DEFINE_PCI_DEVICE_TABLE(pch_udc_pcidev_id) = {
+ {
+ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EG20T_UDC),
+ .class = (PCI_CLASS_SERIAL_USB << 8) | 0xfe,
+ .class_mask = 0xffffffff,
+ },
+ { 0 },
+};
+
+MODULE_DEVICE_TABLE(pci, pch_udc_pcidev_id);
+
+
+static struct pci_driver pch_udc_driver = {
+ .name = KBUILD_MODNAME,
+ .id_table = pch_udc_pcidev_id,
+ .probe = pch_udc_probe,
+ .remove = pch_udc_remove,
+ .suspend = pch_udc_suspend,
+ .resume = pch_udc_resume,
+ .shutdown = pch_udc_shutdown,
+};
+
+static int __init pch_udc_pci_init(void)
+{
+ return pci_register_driver(&pch_udc_driver);
+}
+module_init(pch_udc_pci_init);
+
+static void __exit pch_udc_pci_exit(void)
+{
+ pci_unregister_driver(&pch_udc_driver);
+}
+module_exit(pch_udc_pci_exit);
+
+MODULE_DESCRIPTION("Intel EG20T USB Device Controller");
+MODULE_AUTHOR("OKI SEMICONDUCTOR, <toshiharu-linux@dsn.okisemi.com>");
+MODULE_LICENSE("GPL");