diff options
Diffstat (limited to 'drivers/usb/gadget/pxa27x_udc.h')
| -rw-r--r-- | drivers/usb/gadget/pxa27x_udc.h | 487 |
1 files changed, 487 insertions, 0 deletions
diff --git a/drivers/usb/gadget/pxa27x_udc.h b/drivers/usb/gadget/pxa27x_udc.h new file mode 100644 index 00000000000..1d1b7936ee1 --- /dev/null +++ b/drivers/usb/gadget/pxa27x_udc.h @@ -0,0 +1,487 @@ +/* + * linux/drivers/usb/gadget/pxa27x_udc.h + * Intel PXA27x on-chip full speed USB device controller + * + * Inspired by original driver by Frank Becker, David Brownell, and others. + * Copyright (C) 2008 Robert Jarzmik + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __LINUX_USB_GADGET_PXA27X_H +#define __LINUX_USB_GADGET_PXA27X_H + +#include <linux/types.h> +#include <linux/spinlock.h> +#include <linux/io.h> + +/* + * Register definitions + */ +/* Offsets */ +#define UDCCR 0x0000 /* UDC Control Register */ +#define UDCICR0 0x0004 /* UDC Interrupt Control Register0 */ +#define UDCICR1 0x0008 /* UDC Interrupt Control Register1 */ +#define UDCISR0 0x000C /* UDC Interrupt Status Register 0 */ +#define UDCISR1 0x0010 /* UDC Interrupt Status Register 1 */ +#define UDCFNR 0x0014 /* UDC Frame Number Register */ +#define UDCOTGICR 0x0018 /* UDC On-The-Go interrupt control */ +#define UP2OCR 0x0020 /* USB Port 2 Output Control register */ +#define UP3OCR 0x0024 /* USB Port 3 Output Control register */ +#define UDCCSRn(x) (0x0100 + ((x)<<2)) /* UDC Control/Status register */ +#define UDCBCRn(x) (0x0200 + ((x)<<2)) /* UDC Byte Count Register */ +#define UDCDRn(x) (0x0300 + ((x)<<2)) /* UDC Data Register */ +#define UDCCRn(x) (0x0400 + ((x)<<2)) /* UDC Control Register */ + +#define UDCCR_OEN (1 << 31) /* On-the-Go Enable */ +#define UDCCR_AALTHNP (1 << 30) /* A-device Alternate Host Negotiation + Protocol Port Support */ +#define UDCCR_AHNP (1 << 29) /* A-device Host Negotiation Protocol + Support */ +#define UDCCR_BHNP (1 << 28) /* B-device Host Negotiation Protocol + Enable */ +#define UDCCR_DWRE (1 << 16) /* Device Remote Wake-up Enable */ +#define UDCCR_ACN (0x03 << 11) /* Active UDC configuration Number */ +#define UDCCR_ACN_S 11 +#define UDCCR_AIN (0x07 << 8) /* Active UDC interface Number */ +#define UDCCR_AIN_S 8 +#define UDCCR_AAISN (0x07 << 5) /* Active UDC Alternate Interface + Setting Number */ +#define UDCCR_AAISN_S 5 +#define UDCCR_SMAC (1 << 4) /* Switch Endpoint Memory to Active + Configuration */ +#define UDCCR_EMCE (1 << 3) /* Endpoint Memory Configuration + Error */ +#define UDCCR_UDR (1 << 2) /* UDC Resume */ +#define UDCCR_UDA (1 << 1) /* UDC Active */ +#define UDCCR_UDE (1 << 0) /* UDC Enable */ + +#define UDCICR_INT(n, intr) (((intr) & 0x03) << (((n) & 0x0F) * 2)) +#define UDCICR1_IECC (1 << 31) /* IntEn - Configuration Change */ +#define UDCICR1_IESOF (1 << 30) /* IntEn - Start of Frame */ +#define UDCICR1_IERU (1 << 29) /* IntEn - Resume */ +#define UDCICR1_IESU (1 << 28) /* IntEn - Suspend */ +#define UDCICR1_IERS (1 << 27) /* IntEn - Reset */ +#define UDCICR_FIFOERR (1 << 1) /* FIFO Error interrupt for EP */ +#define UDCICR_PKTCOMPL (1 << 0) /* Packet Complete interrupt for EP */ +#define UDCICR_INT_MASK (UDCICR_FIFOERR | UDCICR_PKTCOMPL) + +#define UDCISR_INT(n, intr) (((intr) & 0x03) << (((n) & 0x0F) * 2)) +#define UDCISR1_IRCC (1 << 31) /* IntReq - Configuration Change */ +#define UDCISR1_IRSOF (1 << 30) /* IntReq - Start of Frame */ +#define UDCISR1_IRRU (1 << 29) /* IntReq - Resume */ +#define UDCISR1_IRSU (1 << 28) /* IntReq - Suspend */ +#define UDCISR1_IRRS (1 << 27) /* IntReq - Reset */ +#define UDCISR_INT_MASK (UDCICR_FIFOERR | UDCICR_PKTCOMPL) + +#define UDCOTGICR_IESF (1 << 24) /* OTG SET_FEATURE command recvd */ +#define UDCOTGICR_IEXR (1 << 17) /* Extra Transciever Interrupt + Rising Edge Interrupt Enable */ +#define UDCOTGICR_IEXF (1 << 16) /* Extra Transciever Interrupt + Falling Edge Interrupt Enable */ +#define UDCOTGICR_IEVV40R (1 << 9) /* OTG Vbus Valid 4.0V Rising Edge + Interrupt Enable */ +#define UDCOTGICR_IEVV40F (1 << 8) /* OTG Vbus Valid 4.0V Falling Edge + Interrupt Enable */ +#define UDCOTGICR_IEVV44R (1 << 7) /* OTG Vbus Valid 4.4V Rising Edge + Interrupt Enable */ +#define UDCOTGICR_IEVV44F (1 << 6) /* OTG Vbus Valid 4.4V Falling Edge + Interrupt Enable */ +#define UDCOTGICR_IESVR (1 << 5) /* OTG Session Valid Rising Edge + Interrupt Enable */ +#define UDCOTGICR_IESVF (1 << 4) /* OTG Session Valid Falling Edge + Interrupt Enable */ +#define UDCOTGICR_IESDR (1 << 3) /* OTG A-Device SRP Detect Rising + Edge Interrupt Enable */ +#define UDCOTGICR_IESDF (1 << 2) /* OTG A-Device SRP Detect Falling + Edge Interrupt Enable */ +#define UDCOTGICR_IEIDR (1 << 1) /* OTG ID Change Rising Edge + Interrupt Enable */ +#define UDCOTGICR_IEIDF (1 << 0) /* OTG ID Change Falling Edge + Interrupt Enable */ + +/* Host Port 2 field bits */ +#define UP2OCR_CPVEN (1 << 0) /* Charge Pump Vbus Enable */ +#define UP2OCR_CPVPE (1 << 1) /* Charge Pump Vbus Pulse Enable */ + /* Transceiver enablers */ +#define UP2OCR_DPPDE (1 << 2) /* D+ Pull Down Enable */ +#define UP2OCR_DMPDE (1 << 3) /* D- Pull Down Enable */ +#define UP2OCR_DPPUE (1 << 4) /* D+ Pull Up Enable */ +#define UP2OCR_DMPUE (1 << 5) /* D- Pull Up Enable */ +#define UP2OCR_DPPUBE (1 << 6) /* D+ Pull Up Bypass Enable */ +#define UP2OCR_DMPUBE (1 << 7) /* D- Pull Up Bypass Enable */ +#define UP2OCR_EXSP (1 << 8) /* External Transceiver Speed Control */ +#define UP2OCR_EXSUS (1 << 9) /* External Transceiver Speed Enable */ +#define UP2OCR_IDON (1 << 10) /* OTG ID Read Enable */ +#define UP2OCR_HXS (1 << 16) /* Transceiver Output Select */ +#define UP2OCR_HXOE (1 << 17) /* Transceiver Output Enable */ +#define UP2OCR_SEOS (1 << 24) /* Single-Ended Output Select */ + +#define UDCCSR0_SA (1 << 7) /* Setup Active */ +#define UDCCSR0_RNE (1 << 6) /* Receive FIFO Not Empty */ +#define UDCCSR0_FST (1 << 5) /* Force Stall */ +#define UDCCSR0_SST (1 << 4) /* Sent Stall */ +#define UDCCSR0_DME (1 << 3) /* DMA Enable */ +#define UDCCSR0_FTF (1 << 2) /* Flush Transmit FIFO */ +#define UDCCSR0_IPR (1 << 1) /* IN Packet Ready */ +#define UDCCSR0_OPC (1 << 0) /* OUT Packet Complete */ + +#define UDCCSR_DPE (1 << 9) /* Data Packet Error */ +#define UDCCSR_FEF (1 << 8) /* Flush Endpoint FIFO */ +#define UDCCSR_SP (1 << 7) /* Short Packet Control/Status */ +#define UDCCSR_BNE (1 << 6) /* Buffer Not Empty (IN endpoints) */ +#define UDCCSR_BNF (1 << 6) /* Buffer Not Full (OUT endpoints) */ +#define UDCCSR_FST (1 << 5) /* Force STALL */ +#define UDCCSR_SST (1 << 4) /* Sent STALL */ +#define UDCCSR_DME (1 << 3) /* DMA Enable */ +#define UDCCSR_TRN (1 << 2) /* Tx/Rx NAK */ +#define UDCCSR_PC (1 << 1) /* Packet Complete */ +#define UDCCSR_FS (1 << 0) /* FIFO needs service */ + +#define UDCCONR_CN (0x03 << 25) /* Configuration Number */ +#define UDCCONR_CN_S 25 +#define UDCCONR_IN (0x07 << 22) /* Interface Number */ +#define UDCCONR_IN_S 22 +#define UDCCONR_AISN (0x07 << 19) /* Alternate Interface Number */ +#define UDCCONR_AISN_S 19 +#define UDCCONR_EN (0x0f << 15) /* Endpoint Number */ +#define UDCCONR_EN_S 15 +#define UDCCONR_ET (0x03 << 13) /* Endpoint Type: */ +#define UDCCONR_ET_S 13 +#define UDCCONR_ET_INT (0x03 << 13) /* Interrupt */ +#define UDCCONR_ET_BULK (0x02 << 13) /* Bulk */ +#define UDCCONR_ET_ISO (0x01 << 13) /* Isochronous */ +#define UDCCONR_ET_NU (0x00 << 13) /* Not used */ +#define UDCCONR_ED (1 << 12) /* Endpoint Direction */ +#define UDCCONR_MPS (0x3ff << 2) /* Maximum Packet Size */ +#define UDCCONR_MPS_S 2 +#define UDCCONR_DE (1 << 1) /* Double Buffering Enable */ +#define UDCCONR_EE (1 << 0) /* Endpoint Enable */ + +#define UDCCR_MASK_BITS (UDCCR_OEN | UDCCR_SMAC | UDCCR_UDR | UDCCR_UDE) +#define UDCCSR_WR_MASK (UDCCSR_DME | UDCCSR_FST) +#define UDC_FNR_MASK (0x7ff) +#define UDC_BCR_MASK (0x3ff) + +/* + * UDCCR = UDC Endpoint Configuration Registers + * UDCCSR = UDC Control/Status Register for this EP + * UDCBCR = UDC Byte Count Remaining (contents of OUT fifo) + * UDCDR = UDC Endpoint Data Register (the fifo) + */ +#define ofs_UDCCR(ep) (UDCCRn(ep->idx)) +#define ofs_UDCCSR(ep) (UDCCSRn(ep->idx)) +#define ofs_UDCBCR(ep) (UDCBCRn(ep->idx)) +#define ofs_UDCDR(ep) (UDCDRn(ep->idx)) + +/* Register access macros */ +#define udc_ep_readl(ep, reg) \ + __raw_readl((ep)->dev->regs + ofs_##reg(ep)) +#define udc_ep_writel(ep, reg, value) \ + __raw_writel((value), ep->dev->regs + ofs_##reg(ep)) +#define udc_ep_readb(ep, reg) \ + __raw_readb((ep)->dev->regs + ofs_##reg(ep)) +#define udc_ep_writeb(ep, reg, value) \ + __raw_writeb((value), ep->dev->regs + ofs_##reg(ep)) +#define udc_readl(dev, reg) \ + __raw_readl((dev)->regs + (reg)) +#define udc_writel(udc, reg, value) \ + __raw_writel((value), (udc)->regs + (reg)) + +#define UDCCSR_MASK (UDCCSR_FST | UDCCSR_DME) +#define UDCCISR0_EP_MASK ~0 +#define UDCCISR1_EP_MASK 0xffff +#define UDCCSR0_CTRL_REQ_MASK (UDCCSR0_OPC | UDCCSR0_SA | UDCCSR0_RNE) + +#define EPIDX(ep) (ep->idx) +#define EPADDR(ep) (ep->addr) +#define EPXFERTYPE(ep) (ep->type) +#define EPNAME(ep) (ep->name) +#define is_ep0(ep) (!ep->idx) +#define EPXFERTYPE_is_ISO(ep) (EPXFERTYPE(ep) == USB_ENDPOINT_XFER_ISOC) + +/* + * Endpoint definitions + * + * Once enabled, pxa endpoint configuration is freezed, and cannot change + * unless a reset happens or the udc is disabled. + * Therefore, we must define all pxa potential endpoint definitions needed for + * all gadget and set them up before the udc is enabled. + * + * As the architecture chosen is fully static, meaning the pxa endpoint + * configurations are set up once and for all, we must provide a way to match + * one usb endpoint (usb_ep) to several pxa endpoints. The reason is that gadget + * layer autoconf doesn't choose the usb_ep endpoint on (config, interface, alt) + * criteria, while the pxa architecture requires that. + * + * The solution is to define several pxa endpoints matching one usb_ep. Ex: + * - "ep1-in" matches pxa endpoint EPA (which is an IN ep at addr 1, when + * the udc talks on (config=3, interface=0, alt=0) + * - "ep1-in" matches pxa endpoint EPB (which is an IN ep at addr 1, when + * the udc talks on (config=3, interface=0, alt=1) + * - "ep1-in" matches pxa endpoint EPC (which is an IN ep at addr 1, when + * the udc talks on (config=2, interface=0, alt=0) + * + * We'll define the pxa endpoint by its index (EPA => idx=1, EPB => idx=2, ...) + */ + +/* + * Endpoint definition helpers + */ +#define USB_EP_DEF(addr, bname, dir, type, maxpkt) \ +{ .usb_ep = { .name = bname, .ops = &pxa_ep_ops, .maxpacket = maxpkt, }, \ + .desc = { .bEndpointAddress = addr | (dir ? USB_DIR_IN : 0), \ + .bmAttributes = type, \ + .wMaxPacketSize = maxpkt, }, \ + .dev = &memory \ +} +#define USB_EP_BULK(addr, bname, dir) \ + USB_EP_DEF(addr, bname, dir, USB_ENDPOINT_XFER_BULK, BULK_FIFO_SIZE) +#define USB_EP_ISO(addr, bname, dir) \ + USB_EP_DEF(addr, bname, dir, USB_ENDPOINT_XFER_ISOC, ISO_FIFO_SIZE) +#define USB_EP_INT(addr, bname, dir) \ + USB_EP_DEF(addr, bname, dir, USB_ENDPOINT_XFER_INT, INT_FIFO_SIZE) +#define USB_EP_IN_BULK(n) USB_EP_BULK(n, "ep" #n "in-bulk", 1) +#define USB_EP_OUT_BULK(n) USB_EP_BULK(n, "ep" #n "out-bulk", 0) +#define USB_EP_IN_ISO(n) USB_EP_ISO(n, "ep" #n "in-iso", 1) +#define USB_EP_OUT_ISO(n) USB_EP_ISO(n, "ep" #n "out-iso", 0) +#define USB_EP_IN_INT(n) USB_EP_INT(n, "ep" #n "in-int", 1) +#define USB_EP_CTRL USB_EP_DEF(0, "ep0", 0, 0, EP0_FIFO_SIZE) + +#define PXA_EP_DEF(_idx, _addr, dir, _type, maxpkt, _config, iface, altset) \ +{ \ + .dev = &memory, \ + .name = "ep" #_idx, \ + .idx = _idx, .enabled = 0, \ + .dir_in = dir, .addr = _addr, \ + .config = _config, .interface = iface, .alternate = altset, \ + .type = _type, .fifo_size = maxpkt, \ +} +#define PXA_EP_BULK(_idx, addr, dir, config, iface, alt) \ + PXA_EP_DEF(_idx, addr, dir, USB_ENDPOINT_XFER_BULK, BULK_FIFO_SIZE, \ + config, iface, alt) +#define PXA_EP_ISO(_idx, addr, dir, config, iface, alt) \ + PXA_EP_DEF(_idx, addr, dir, USB_ENDPOINT_XFER_ISOC, ISO_FIFO_SIZE, \ + config, iface, alt) +#define PXA_EP_INT(_idx, addr, dir, config, iface, alt) \ + PXA_EP_DEF(_idx, addr, dir, USB_ENDPOINT_XFER_INT, INT_FIFO_SIZE, \ + config, iface, alt) +#define PXA_EP_IN_BULK(i, adr, c, f, a) PXA_EP_BULK(i, adr, 1, c, f, a) +#define PXA_EP_OUT_BULK(i, adr, c, f, a) PXA_EP_BULK(i, adr, 0, c, f, a) +#define PXA_EP_IN_ISO(i, adr, c, f, a) PXA_EP_ISO(i, adr, 1, c, f, a) +#define PXA_EP_OUT_ISO(i, adr, c, f, a) PXA_EP_ISO(i, adr, 0, c, f, a) +#define PXA_EP_IN_INT(i, adr, c, f, a) PXA_EP_INT(i, adr, 1, c, f, a) +#define PXA_EP_CTRL PXA_EP_DEF(0, 0, 0, 0, EP0_FIFO_SIZE, 0, 0, 0) + +struct pxa27x_udc; + +struct stats { + unsigned long in_ops; + unsigned long out_ops; + unsigned long in_bytes; + unsigned long out_bytes; + unsigned long irqs; +}; + +/** + * struct udc_usb_ep - container of each usb_ep structure + * @usb_ep: usb endpoint + * @desc: usb descriptor, especially type and address + * @dev: udc managing this endpoint + * @pxa_ep: matching pxa_ep (cache of find_pxa_ep() call) + */ +struct udc_usb_ep { + struct usb_ep usb_ep; + struct usb_endpoint_descriptor desc; + struct pxa_udc *dev; + struct pxa_ep *pxa_ep; +}; + +/** + * struct pxa_ep - pxa endpoint + * @dev: udc device + * @queue: requests queue + * @lock: lock to pxa_ep data (queues and stats) + * @enabled: true when endpoint enabled (not stopped by gadget layer) + * @idx: endpoint index (1 => epA, 2 => epB, ..., 24 => epX) + * @name: endpoint name (for trace/debug purpose) + * @dir_in: 1 if IN endpoint, 0 if OUT endpoint + * @addr: usb endpoint number + * @config: configuration in which this endpoint is active + * @interface: interface in which this endpoint is active + * @alternate: altsetting in which this endpoitn is active + * @fifo_size: max packet size in the endpoint fifo + * @type: endpoint type (bulk, iso, int, ...) + * @udccsr_value: save register of UDCCSR0 for suspend/resume + * @udccr_value: save register of UDCCR for suspend/resume + * @stats: endpoint statistics + * + * The *PROBLEM* is that pxa's endpoint configuration scheme is both misdesigned + * (cares about config/interface/altsetting, thus placing needless limits on + * device capability) and full of implementation bugs forcing it to be set up + * for use more or less like a pxa255. + * + * As we define the pxa_ep statically, we must guess all needed pxa_ep for all + * gadget which may work with this udc driver. + */ +struct pxa_ep { + struct pxa_udc *dev; + + struct list_head queue; + spinlock_t lock; /* Protects this structure */ + /* (queues, stats) */ + unsigned enabled:1; + + unsigned idx:5; + char *name; + + /* + * Specific pxa endpoint data, needed for hardware initialization + */ + unsigned dir_in:1; + unsigned addr:3; + unsigned config:2; + unsigned interface:3; + unsigned alternate:3; + unsigned fifo_size; + unsigned type; + +#ifdef CONFIG_PM + u32 udccsr_value; + u32 udccr_value; +#endif + struct stats stats; +}; + +/** + * struct pxa27x_request - container of each usb_request structure + * @req: usb request + * @udc_usb_ep: usb endpoint the request was submitted on + * @in_use: sanity check if request already queued on an pxa_ep + * @queue: linked list of requests, linked on pxa_ep->queue + */ +struct pxa27x_request { + struct usb_request req; + struct udc_usb_ep *udc_usb_ep; + unsigned in_use:1; + struct list_head queue; +}; + +enum ep0_state { + WAIT_FOR_SETUP, + SETUP_STAGE, + IN_DATA_STAGE, + OUT_DATA_STAGE, + IN_STATUS_STAGE, + OUT_STATUS_STAGE, + STALL, + WAIT_ACK_SET_CONF_INTERF +}; + +static char *ep0_state_name[] = { + "WAIT_FOR_SETUP", "SETUP_STAGE", "IN_DATA_STAGE", "OUT_DATA_STAGE", + "IN_STATUS_STAGE", "OUT_STATUS_STAGE", "STALL", + "WAIT_ACK_SET_CONF_INTERF" +}; +#define EP0_STNAME(udc) ep0_state_name[(udc)->ep0state] + +#define EP0_FIFO_SIZE 16U +#define BULK_FIFO_SIZE 64U +#define ISO_FIFO_SIZE 256U +#define INT_FIFO_SIZE 16U + +struct udc_stats { + unsigned long irqs_reset; + unsigned long irqs_suspend; + unsigned long irqs_resume; + unsigned long irqs_reconfig; +}; + +#define NR_USB_ENDPOINTS (1 + 5) /* ep0 + ep1in-bulk + .. + ep3in-iso */ +#define NR_PXA_ENDPOINTS (1 + 14) /* ep0 + epA + epB + .. + epX */ + +/** + * struct pxa_udc - udc structure + * @regs: mapped IO space + * @irq: udc irq + * @clk: udc clock + * @usb_gadget: udc gadget structure + * @driver: bound gadget (zero, g_ether, g_file_storage, ...) + * @dev: device + * @mach: machine info, used to activate specific GPIO + * @ep0state: control endpoint state machine state + * @stats: statistics on udc usage + * @udc_usb_ep: array of usb endpoints offered by the gadget + * @pxa_ep: array of pxa available endpoints + * @config: UDC active configuration + * @last_interface: UDC interface of the last SET_INTERFACE host request + * @last_alternate: UDC altsetting of the last SET_INTERFACE host request + * @udccsr0: save of udccsr0 in case of suspend + * @debugfs_root: root entry of debug filesystem + * @debugfs_state: debugfs entry for "udcstate" + * @debugfs_queues: debugfs entry for "queues" + * @debugfs_eps: debugfs entry for "epstate" + */ +struct pxa_udc { + void __iomem *regs; + int irq; + struct clk *clk; + + struct usb_gadget gadget; + struct usb_gadget_driver *driver; + struct device *dev; + struct pxa2xx_udc_mach_info *mach; + + enum ep0_state ep0state; + struct udc_stats stats; + + struct udc_usb_ep udc_usb_ep[NR_USB_ENDPOINTS]; + struct pxa_ep pxa_ep[NR_PXA_ENDPOINTS]; + + unsigned config:2; + unsigned last_interface:3; + unsigned last_alternate:3; + +#ifdef CONFIG_PM + unsigned udccsr0; +#endif +#ifdef CONFIG_USB_GADGET_DEBUG_FS + struct dentry *debugfs_root; + struct dentry *debugfs_state; + struct dentry *debugfs_queues; + struct dentry *debugfs_eps; +#endif +}; + +static inline struct pxa_udc *to_gadget_udc(struct usb_gadget *gadget) +{ + return container_of(gadget, struct pxa_udc, gadget); +} + +/* + * Debugging/message support + */ +#define ep_dbg(ep, fmt, arg...) \ + dev_dbg(ep->dev->dev, "%s:%s: " fmt, EPNAME(ep), __func__, ## arg) +#define ep_vdbg(ep, fmt, arg...) \ + dev_vdbg(ep->dev->dev, "%s:%s: " fmt, EPNAME(ep), __func__, ## arg) +#define ep_err(ep, fmt, arg...) \ + dev_err(ep->dev->dev, "%s:%s: " fmt, EPNAME(ep), __func__, ## arg) +#define ep_info(ep, fmt, arg...) \ + dev_info(ep->dev->dev, "%s:%s: " fmt, EPNAME(ep), __func__, ## arg) +#define ep_warn(ep, fmt, arg...) \ + dev_warn(ep->dev->dev, "%s:%s:" fmt, EPNAME(ep), __func__, ## arg) + +#endif /* __LINUX_USB_GADGET_PXA27X_H */ |