diff options
Diffstat (limited to 'drivers/usb/gadget/s3c-hsotg.c')
| -rw-r--r-- | drivers/usb/gadget/s3c-hsotg.c | 153 |
1 files changed, 122 insertions, 31 deletions
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c index 26193eceb32..521ebed0118 100644 --- a/drivers/usb/gadget/s3c-hsotg.c +++ b/drivers/usb/gadget/s3c-hsotg.c @@ -12,6 +12,8 @@ * published by the Free Software Foundation. */ +#define DEBUG + #include <linux/kernel.h> #include <linux/module.h> #include <linux/spinlock.h> @@ -23,6 +25,7 @@ #include <linux/delay.h> #include <linux/io.h> #include <linux/slab.h> +#include <linux/clk.h> #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> @@ -33,6 +36,7 @@ #include <plat/regs-usb-hsotg.h> #include <mach/regs-sys.h> #include <plat/udc-hs.h> +#include <plat/cpu.h> #define DMA_ADDR_INVALID (~((dma_addr_t)0)) @@ -91,7 +95,9 @@ struct s3c_hsotg_req; * For periodic IN endpoints, we have fifo_size and fifo_load to try * and keep track of the amount of data in the periodic FIFO for each * of these as we don't have a status register that tells us how much - * is in each of them. + * is in each of them. (note, this may actually be useless information + * as in shared-fifo mode periodic in acts like a single-frame packet + * buffer than a fifo) */ struct s3c_hsotg_ep { struct usb_ep ep; @@ -128,6 +134,7 @@ struct s3c_hsotg_ep { * @regs: The memory area mapped for accessing registers. * @regs_res: The resource that was allocated when claiming register space. * @irq: The IRQ number we are using + * @dedicated_fifos: Set if the hardware has dedicated IN-EP fifos. * @debug_root: root directrory for debugfs. * @debug_file: main status file for debugfs. * @debug_fifo: FIFO status file for debugfs. @@ -145,6 +152,9 @@ struct s3c_hsotg { void __iomem *regs; struct resource *regs_res; int irq; + struct clk *clk; + + unsigned int dedicated_fifos:1; struct dentry *debug_root; struct dentry *debug_file; @@ -310,11 +320,11 @@ static void s3c_hsotg_init_fifo(struct s3c_hsotg *hsotg) hsotg->regs + S3C_GNPTXFSIZ); */ - /* set FIFO sizes to 2048/0x1C0 */ + /* set FIFO sizes to 2048/1024 */ writel(2048, hsotg->regs + S3C_GRXFSIZ); writel(S3C_GNPTXFSIZ_NPTxFStAddr(2048) | - S3C_GNPTXFSIZ_NPTxFDep(0x1C0), + S3C_GNPTXFSIZ_NPTxFDep(1024), hsotg->regs + S3C_GNPTXFSIZ); /* arange all the rest of the TX FIFOs, as some versions of this @@ -464,7 +474,7 @@ static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg, if (to_write == 0) return 0; - if (periodic) { + if (periodic && !hsotg->dedicated_fifos) { u32 epsize = readl(hsotg->regs + S3C_DIEPTSIZ(hs_ep->index)); int size_left; int size_done; @@ -474,6 +484,14 @@ static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg, size_left = S3C_DxEPTSIZ_XferSize_GET(epsize); + /* if shared fifo, we cannot write anything until the + * previous data has been completely sent. + */ + if (hs_ep->fifo_load != 0) { + s3c_hsotg_en_gsint(hsotg, S3C_GINTSTS_PTxFEmp); + return -ENOSPC; + } + dev_dbg(hsotg->dev, "%s: left=%d, load=%d, fifo=%d, size %d\n", __func__, size_left, hs_ep->size_loaded, hs_ep->fifo_load, hs_ep->fifo_size); @@ -494,6 +512,11 @@ static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg, s3c_hsotg_en_gsint(hsotg, S3C_GINTSTS_PTxFEmp); return -ENOSPC; } + } else if (hsotg->dedicated_fifos && hs_ep->index != 0) { + can_write = readl(hsotg->regs + S3C_DTXFSTS(hs_ep->index)); + + can_write &= 0xffff; + can_write *= 4; } else { if (S3C_GNPTXSTS_NPTxQSpcAvail_GET(gnptxsts) == 0) { dev_dbg(hsotg->dev, @@ -505,6 +528,7 @@ static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg, } can_write = S3C_GNPTXSTS_NPTxFSpcAvail_GET(gnptxsts); + can_write *= 4; /* fifo size is in 32bit quantities. */ } dev_dbg(hsotg->dev, "%s: GNPTXSTS=%08x, can=%d, to=%d, mps %d\n", @@ -517,6 +541,17 @@ static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg, if (can_write > 512) can_write = 512; + /* limit the write to one max-packet size worth of data, but allow + * the transfer to return that it did not run out of fifo space + * doing it. */ + if (to_write > hs_ep->ep.maxpacket) { + to_write = hs_ep->ep.maxpacket; + + s3c_hsotg_en_gsint(hsotg, + periodic ? S3C_GINTSTS_PTxFEmp : + S3C_GINTSTS_NPTxFEmp); + } + /* see if we can write data */ if (to_write > can_write) { @@ -579,12 +614,10 @@ static unsigned get_ep_limit(struct s3c_hsotg_ep *hs_ep) maxsize = S3C_DxEPTSIZ_XferSize_LIMIT + 1; maxpkt = S3C_DxEPTSIZ_PktCnt_LIMIT + 1; } else { + maxsize = 64+64; if (hs_ep->dir_in) { - /* maxsize = S3C_DIEPTSIZ0_XferSize_LIMIT + 1; */ - maxsize = 64+64+1; maxpkt = S3C_DIEPTSIZ0_PktCnt_LIMIT + 1; } else { - maxsize = 0x3f; maxpkt = 2; } } @@ -1353,6 +1386,9 @@ static void s3c_hsotg_rx_data(struct s3c_hsotg *hsotg, int ep_idx, int size) read_ptr = hs_req->req.actual; max_req = hs_req->req.length - read_ptr; + dev_dbg(hsotg->dev, "%s: read %d/%d, done %d/%d\n", + __func__, to_read, max_req, read_ptr, hs_req->req.length); + if (to_read > max_req) { /* more data appeared than we where willing * to deal with in this request. @@ -1362,9 +1398,6 @@ static void s3c_hsotg_rx_data(struct s3c_hsotg *hsotg, int ep_idx, int size) WARN_ON_ONCE(1); } - dev_dbg(hsotg->dev, "%s: read %d/%d, done %d/%d\n", - __func__, to_read, max_req, read_ptr, hs_req->req.length); - hs_ep->total_data += to_read; hs_req->req.actual += to_read; to_read = DIV_ROUND_UP(to_read, 4); @@ -1433,9 +1466,11 @@ static void s3c_hsotg_send_zlp(struct s3c_hsotg *hsotg, static void s3c_hsotg_handle_outdone(struct s3c_hsotg *hsotg, int epnum, bool was_setup) { + u32 epsize = readl(hsotg->regs + S3C_DOEPTSIZ(epnum)); struct s3c_hsotg_ep *hs_ep = &hsotg->eps[epnum]; struct s3c_hsotg_req *hs_req = hs_ep->req; struct usb_request *req = &hs_req->req; + unsigned size_left = S3C_DxEPTSIZ_XferSize_GET(epsize); int result = 0; if (!hs_req) { @@ -1444,9 +1479,7 @@ static void s3c_hsotg_handle_outdone(struct s3c_hsotg *hsotg, } if (using_dma(hsotg)) { - u32 epsize = readl(hsotg->regs + S3C_DOEPTSIZ(epnum)); unsigned size_done; - unsigned size_left; /* Calculate the size of the transfer by checking how much * is left in the endpoint size register and then working it @@ -1456,14 +1489,18 @@ static void s3c_hsotg_handle_outdone(struct s3c_hsotg *hsotg, * so may overshoot/undershoot the transfer. */ - size_left = S3C_DxEPTSIZ_XferSize_GET(epsize); - size_done = hs_ep->size_loaded - size_left; size_done += hs_ep->last_load; req->actual = size_done; } + /* if there is more request to do, schedule new transfer */ + if (req->actual < req->length && size_left == 0) { + s3c_hsotg_start_req(hsotg, hs_ep, hs_req, true); + return; + } + if (req->actual < req->length && req->short_not_ok) { dev_dbg(hsotg->dev, "%s: got %d/%d (short not ok) => error\n", __func__, req->actual, req->length); @@ -1758,7 +1795,7 @@ static void s3c_hsotg_epint(struct s3c_hsotg *hsotg, unsigned int idx, if (dir_in) { s3c_hsotg_complete_in(hsotg, hs_ep); - if (idx == 0) + if (idx == 0 && !hs_ep->req) s3c_hsotg_enqueue_setup(hsotg); } else if (using_dma(hsotg)) { /* We're using DMA, we need to fire an OutDone here @@ -1818,6 +1855,15 @@ static void s3c_hsotg_epint(struct s3c_hsotg *hsotg, unsigned int idx, __func__, idx); clear |= S3C_DIEPMSK_INTknEPMisMsk; } + + /* FIFO has space or is empty (see GAHBCFG) */ + if (hsotg->dedicated_fifos && + ints & S3C_DIEPMSK_TxFIFOEmpty) { + dev_dbg(hsotg->dev, "%s: ep%d: TxFIFOEmpty\n", + __func__, idx); + s3c_hsotg_trytx(hsotg, hs_ep); + clear |= S3C_DIEPMSK_TxFIFOEmpty; + } } writel(clear, hsotg->regs + epint_reg); @@ -2071,17 +2117,12 @@ irq_retry: kill_all_requests(hsotg, &hsotg->eps[0], -ECONNRESET, true); /* it seems after a reset we can end up with a situation - * where the TXFIFO still has data in it... try flushing - * it to remove anything that may still be in it. + * where the TXFIFO still has data in it... the docs + * suggest resetting all the fifos, so use the init_fifo + * code to relayout and flush the fifos. */ - if (1) { - writel(S3C_GRSTCTL_TxFNum(0) | S3C_GRSTCTL_TxFFlsh, - hsotg->regs + S3C_GRSTCTL); - - dev_info(hsotg->dev, "GNPTXSTS=%08x\n", - readl(hsotg->regs + S3C_GNPTXSTS)); - } + s3c_hsotg_init_fifo(hsotg); s3c_hsotg_enqueue_setup(hsotg); @@ -2274,6 +2315,12 @@ static int s3c_hsotg_ep_enable(struct usb_ep *ep, break; } + /* if the hardware has dedicated fifos, we must give each IN EP + * a unique tx-fifo even if it is non-periodic. + */ + if (dir_in && hsotg->dedicated_fifos) + epctrl |= S3C_DxEPCTL_TxFNum(index); + /* for non control endpoints, set PID to D0 */ if (index) epctrl |= S3C_DxEPCTL_SetD0PID; @@ -2563,7 +2610,8 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver) writel(S3C_DIEPMSK_TimeOUTMsk | S3C_DIEPMSK_AHBErrMsk | S3C_DIEPMSK_INTknEPMisMsk | - S3C_DIEPMSK_EPDisbldMsk | S3C_DIEPMSK_XferComplMsk, + S3C_DIEPMSK_EPDisbldMsk | S3C_DIEPMSK_XferComplMsk | + ((hsotg->dedicated_fifos) ? S3C_DIEPMSK_TxFIFOEmpty : 0), hsotg->regs + S3C_DIEPMSK); /* don't need XferCompl, we get that from RXFIFO in slave mode. In @@ -2732,7 +2780,7 @@ static void __devinit s3c_hsotg_initep(struct s3c_hsotg *hsotg, */ ptxfifo = readl(hsotg->regs + S3C_DPTXFSIZn(epnum)); - hs_ep->fifo_size = S3C_DPTXFSIZn_DPTxFSize_GET(ptxfifo); + hs_ep->fifo_size = S3C_DPTXFSIZn_DPTxFSize_GET(ptxfifo) * 4; /* if we're using dma, we need to set the next-endpoint pointer * to be something valid. @@ -2753,13 +2801,33 @@ static void __devinit s3c_hsotg_initep(struct s3c_hsotg *hsotg, */ static void s3c_hsotg_otgreset(struct s3c_hsotg *hsotg) { - u32 osc; + struct clk *xusbxti; + u32 pwr, osc; - writel(0, S3C_PHYPWR); + pwr = readl(S3C_PHYPWR); + pwr &= ~0x19; + writel(pwr, S3C_PHYPWR); mdelay(1); osc = hsotg->plat->is_osc ? S3C_PHYCLK_EXT_OSC : 0; + xusbxti = clk_get(hsotg->dev, "xusbxti"); + if (xusbxti && !IS_ERR(xusbxti)) { + switch (clk_get_rate(xusbxti)) { + case 12*MHZ: + osc |= S3C_PHYCLK_CLKSEL_12M; + break; + case 24*MHZ: + osc |= S3C_PHYCLK_CLKSEL_24M; + break; + default: + case 48*MHZ: + /* default reference clock */ + break; + } + clk_put(xusbxti); + } + writel(osc | 0x10, S3C_PHYCLK); /* issue a full set of resets to the otg and core */ @@ -2772,6 +2840,8 @@ static void s3c_hsotg_otgreset(struct s3c_hsotg *hsotg) static void s3c_hsotg_init(struct s3c_hsotg *hsotg) { + u32 cfg4; + /* unmask subset of endpoint interrupts */ writel(S3C_DIEPMSK_TimeOUTMsk | S3C_DIEPMSK_AHBErrMsk | @@ -2807,6 +2877,14 @@ static void s3c_hsotg_init(struct s3c_hsotg *hsotg) writel(using_dma(hsotg) ? S3C_GAHBCFG_DMAEn : 0x0, hsotg->regs + S3C_GAHBCFG); + + /* check hardware configuration */ + + cfg4 = readl(hsotg->regs + 0x50); + hsotg->dedicated_fifos = (cfg4 >> 25) & 1; + + dev_info(hsotg->dev, "%s fifos\n", + hsotg->dedicated_fifos ? "dedicated" : "shared"); } static void s3c_hsotg_dump(struct s3c_hsotg *hsotg) @@ -3181,13 +3259,20 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev) hsotg->dev = dev; hsotg->plat = plat; + hsotg->clk = clk_get(&pdev->dev, "otg"); + if (IS_ERR(hsotg->clk)) { + dev_err(dev, "cannot get otg clock\n"); + ret = -EINVAL; + goto err_mem; + } + platform_set_drvdata(pdev, hsotg); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { dev_err(dev, "cannot find register resource 0\n"); ret = -EINVAL; - goto err_mem; + goto err_clk; } hsotg->regs_res = request_mem_region(res->start, resource_size(res), @@ -3195,7 +3280,7 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev) if (!hsotg->regs_res) { dev_err(dev, "cannot reserve registers\n"); ret = -ENOENT; - goto err_mem; + goto err_clk; } hsotg->regs = ioremap(res->start, resource_size(res)); @@ -3248,6 +3333,8 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev) /* reset the system */ + clk_enable(hsotg->clk); + s3c_hsotg_gate(pdev, true); s3c_hsotg_otgreset(hsotg); @@ -3271,7 +3358,8 @@ err_regs: err_regs_res: release_resource(hsotg->regs_res); kfree(hsotg->regs_res); - +err_clk: + clk_put(hsotg->clk); err_mem: kfree(hsotg); return ret; @@ -3293,6 +3381,9 @@ static int __devexit s3c_hsotg_remove(struct platform_device *pdev) s3c_hsotg_gate(pdev, false); + clk_disable(hsotg->clk); + clk_put(hsotg->clk); + kfree(hsotg); return 0; } |