diff options
Diffstat (limited to 'drivers/usb/gadget/storage_common.c')
| -rw-r--r-- | drivers/usb/gadget/storage_common.c | 105 |
1 files changed, 80 insertions, 25 deletions
diff --git a/drivers/usb/gadget/storage_common.c b/drivers/usb/gadget/storage_common.c index 04c462ff0ea..484acfb1a7c 100644 --- a/drivers/usb/gadget/storage_common.c +++ b/drivers/usb/gadget/storage_common.c @@ -57,10 +57,12 @@ #include <asm/unaligned.h> -/* Thanks to NetChip Technologies for donating this product ID. +/* + * Thanks to NetChip Technologies for donating this product ID. * * DO NOT REUSE THESE IDs with any other driver!! Ever!! - * Instead: allocate your own, using normal USB-IF procedures. */ + * Instead: allocate your own, using normal USB-IF procedures. + */ #define FSG_VENDOR_ID 0x0525 /* NetChip */ #define FSG_PRODUCT_ID 0xa4a5 /* Linux-USB File-backed Storage Gadget */ @@ -84,14 +86,27 @@ #define LWARN(lun, fmt, args...) dev_warn(&(lun)->dev, fmt, ## args) #define LINFO(lun, fmt, args...) dev_info(&(lun)->dev, fmt, ## args) -/* Keep those macros in sync with thos in - * include/linux/ubs/composite.h or else GCC will complain. If they +/* + * Keep those macros in sync with those in + * include/linux/usb/composite.h or else GCC will complain. If they * are identical (the same names of arguments, white spaces in the * same places) GCC will allow redefinition otherwise (even if some - * white space is removed or added) warning will be issued. No - * checking if those symbols is defined is performed because warning - * is desired when those macros were defined by someone else to mean - * something else. */ + * white space is removed or added) warning will be issued. + * + * Those macros are needed here because File Storage Gadget does not + * include the composite.h header. For composite gadgets those macros + * are redundant since composite.h is included any way. + * + * One could check whether those macros are already defined (which + * would indicate composite.h had been included) or not (which would + * indicate we were in FSG) but this is not done because a warning is + * desired if definitions here differ from the ones in composite.h. + * + * We want the definitions to match and be the same in File Storage + * Gadget as well as Mass Storage Function (and so composite gadgets + * using MSF). If someone changes them in composite.h it will produce + * a warning in this file when building MSF. + */ #define DBG(d, fmt, args...) dev_dbg(&(d)->gadget->dev , fmt , ## args) #define VDBG(d, fmt, args...) dev_vdbg(&(d)->gadget->dev , fmt , ## args) #define ERROR(d, fmt, args...) dev_err(&(d)->gadget->dev , fmt , ## args) @@ -269,6 +284,7 @@ struct fsg_lun { unsigned int prevent_medium_removal:1; unsigned int registered:1; unsigned int info_valid:1; + unsigned int nofua:1; u32 sense_data; u32 sense_data_info; @@ -313,9 +329,11 @@ struct fsg_buffhd { enum fsg_buffer_state state; struct fsg_buffhd *next; - /* The NetChip 2280 is faster, and handles some protocol faults + /* + * The NetChip 2280 is faster, and handles some protocol faults * better, if we don't submit any short bulk-out read requests. - * So we will record the intended request length here. */ + * So we will record the intended request length here. + */ unsigned int bulk_out_intended_length; struct usb_request *inreq; @@ -395,8 +413,10 @@ fsg_intf_desc = { .iInterface = FSG_STRING_INTERFACE, }; -/* Three full-speed endpoint descriptors: bulk-in, bulk-out, - * and interrupt-in. */ +/* + * Three full-speed endpoint descriptors: bulk-in, bulk-out, and + * interrupt-in. + */ static struct usb_endpoint_descriptor fsg_fs_bulk_in_desc = { @@ -459,7 +479,7 @@ static struct usb_descriptor_header *fsg_fs_function[] = { * * That means alternate endpoint descriptors (bigger packets) * and a "device qualifier" ... plus more construction options - * for the config descriptor. + * for the configuration descriptor. */ static struct usb_endpoint_descriptor fsg_hs_bulk_in_desc = { @@ -547,8 +567,10 @@ static struct usb_gadget_strings fsg_stringtab = { /*-------------------------------------------------------------------------*/ -/* If the next two routines are called while the gadget is registered, - * the caller must own fsg->filesem for writing. */ +/* + * If the next two routines are called while the gadget is registered, + * the caller must own fsg->filesem for writing. + */ static int fsg_lun_open(struct fsg_lun *curlun, const char *filename) { @@ -587,8 +609,10 @@ static int fsg_lun_open(struct fsg_lun *curlun, const char *filename) goto out; } - /* If we can't read the file, it's no good. - * If we can't write the file, use it read-only. */ + /* + * If we can't read the file, it's no good. + * If we can't write the file, use it read-only. + */ if (!filp->f_op || !(filp->f_op->read || filp->f_op->aio_read)) { LINFO(curlun, "file not readable: %s\n", filename); goto out; @@ -646,8 +670,10 @@ static void fsg_lun_close(struct fsg_lun *curlun) /*-------------------------------------------------------------------------*/ -/* Sync the file data, don't bother with the metadata. - * This code was copied from fs/buffer.c:sys_fdatasync(). */ +/* + * Sync the file data, don't bother with the metadata. + * This code was copied from fs/buffer.c:sys_fdatasync(). + */ static int fsg_lun_fsync_sub(struct fsg_lun *curlun) { struct file *filp = curlun->filp; @@ -689,6 +715,14 @@ static ssize_t fsg_show_ro(struct device *dev, struct device_attribute *attr, : curlun->initially_ro); } +static ssize_t fsg_show_nofua(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct fsg_lun *curlun = fsg_lun_from_dev(dev); + + return sprintf(buf, "%u\n", curlun->nofua); +} + static ssize_t fsg_show_file(struct device *dev, struct device_attribute *attr, char *buf) { @@ -723,26 +757,47 @@ static ssize_t fsg_store_ro(struct device *dev, struct device_attribute *attr, ssize_t rc = count; struct fsg_lun *curlun = fsg_lun_from_dev(dev); struct rw_semaphore *filesem = dev_get_drvdata(dev); - int i; + unsigned long ro; - if (sscanf(buf, "%d", &i) != 1) + if (strict_strtoul(buf, 2, &ro)) return -EINVAL; - /* Allow the write-enable status to change only while the backing file - * is closed. */ + /* + * Allow the write-enable status to change only while the + * backing file is closed. + */ down_read(filesem); if (fsg_lun_is_open(curlun)) { LDBG(curlun, "read-only status change prevented\n"); rc = -EBUSY; } else { - curlun->ro = !!i; - curlun->initially_ro = !!i; + curlun->ro = ro; + curlun->initially_ro = ro; LDBG(curlun, "read-only status set to %d\n", curlun->ro); } up_read(filesem); return rc; } +static ssize_t fsg_store_nofua(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct fsg_lun *curlun = fsg_lun_from_dev(dev); + unsigned long nofua; + + if (strict_strtoul(buf, 2, &nofua)) + return -EINVAL; + + /* Sync data when switching from async mode to sync */ + if (!nofua && curlun->nofua) + fsg_lun_fsync_sub(curlun); + + curlun->nofua = nofua; + + return count; +} + static ssize_t fsg_store_file(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { |