summaryrefslogtreecommitdiffstats
path: root/drivers/usb/gadget
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/gadget')
-rw-r--r--drivers/usb/gadget/Kconfig31
-rw-r--r--drivers/usb/gadget/amd5536udc.c56
-rw-r--r--drivers/usb/gadget/at91_udc.c1
-rw-r--r--drivers/usb/gadget/audio.c24
-rw-r--r--drivers/usb/gadget/composite.c2
-rw-r--r--drivers/usb/gadget/dummy_hcd.c5
-rw-r--r--drivers/usb/gadget/ether.c31
-rw-r--r--drivers/usb/gadget/f_audio.c97
-rw-r--r--drivers/usb/gadget/f_eem.c562
-rw-r--r--drivers/usb/gadget/f_rndis.c15
-rw-r--r--drivers/usb/gadget/fsl_qe_udc.c4
-rw-r--r--drivers/usb/gadget/gmidi.c8
-rw-r--r--drivers/usb/gadget/pxa25x_udc.c49
-rw-r--r--drivers/usb/gadget/pxa25x_udc.h1
-rw-r--r--drivers/usb/gadget/rndis.c13
-rw-r--r--drivers/usb/gadget/rndis.h3
-rw-r--r--drivers/usb/gadget/s3c-hsotg.c6
-rw-r--r--drivers/usb/gadget/s3c2410_udc.c3
-rw-r--r--drivers/usb/gadget/u_audio.c10
-rw-r--r--drivers/usb/gadget/u_ether.c85
-rw-r--r--drivers/usb/gadget/u_ether.h12
-rw-r--r--drivers/usb/gadget/u_serial.c1
22 files changed, 860 insertions, 159 deletions
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 9f986b417c5..33351312327 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -124,7 +124,7 @@ choice
config USB_GADGET_AT91
boolean "Atmel AT91 USB Device Port"
- depends on ARCH_AT91 && !ARCH_AT91SAM9RL && !ARCH_AT91CAP9
+ depends on ARCH_AT91 && !ARCH_AT91SAM9RL && !ARCH_AT91CAP9 && !ARCH_AT91SAM9G45
select USB_GADGET_SELECTED
help
Many Atmel AT91 processors (such as the AT91RM2000) have a
@@ -143,7 +143,7 @@ config USB_AT91
config USB_GADGET_ATMEL_USBA
boolean "Atmel USBA"
select USB_GADGET_DUALSPEED
- depends on AVR32 || ARCH_AT91CAP9 || ARCH_AT91SAM9RL
+ depends on AVR32 || ARCH_AT91CAP9 || ARCH_AT91SAM9RL || ARCH_AT91SAM9G45
help
USBA is the integrated high-speed USB Device controller on
the AT32AP700x, some AT91SAM9 and AT91CAP9 processors from Atmel.
@@ -627,9 +627,10 @@ config USB_AUDIO
config USB_ETH
tristate "Ethernet Gadget (with CDC Ethernet support)"
depends on NET
+ select CRC32
help
- This driver implements Ethernet style communication, in either
- of two ways:
+ This driver implements Ethernet style communication, in one of
+ several ways:
- The "Communication Device Class" (CDC) Ethernet Control Model.
That protocol is often avoided with pure Ethernet adapters, in
@@ -639,7 +640,11 @@ config USB_ETH
- On hardware can't implement that protocol, a simple CDC subset
is used, placing fewer demands on USB.
- RNDIS support is a third option, more demanding than that subset.
+ - CDC Ethernet Emulation Model (EEM) is a newer standard that has
+ a simpler interface that can be used by more USB hardware.
+
+ RNDIS support is an additional option, more demanding than than
+ subset.
Within the USB device, this gadget driver exposes a network device
"usbX", where X depends on what other networking devices you have.
@@ -672,6 +677,22 @@ config USB_ETH_RNDIS
XP, you'll need to download drivers from Microsoft's website; a URL
is given in comments found in that info file.
+config USB_ETH_EEM
+ bool "Ethernet Emulation Model (EEM) support"
+ depends on USB_ETH
+ default n
+ help
+ CDC EEM is a newer USB standard that is somewhat simpler than CDC ECM
+ and therefore can be supported by more hardware. Technically ECM and
+ EEM are designed for different applications. The ECM model extends
+ the network interface to the target (e.g. a USB cable modem), and the
+ EEM model is for mobile devices to communicate with hosts using
+ ethernet over USB. For Linux gadgets, however, the interface with
+ the host is the same (a usbX device), so the differences are minimal.
+
+ If you say "y" here, the Ethernet gadget driver will use the EEM
+ protocol rather than ECM. If unsure, say "n".
+
config USB_GADGETFS
tristate "Gadget Filesystem (EXPERIMENTAL)"
depends on EXPERIMENTAL
diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c
index 77352ccc245..d5b65962dd3 100644
--- a/drivers/usb/gadget/amd5536udc.c
+++ b/drivers/usb/gadget/amd5536udc.c
@@ -2378,40 +2378,34 @@ static irqreturn_t udc_data_in_isr(struct udc *dev, int ep_ix)
if (!ep->cancel_transfer && !list_empty(&ep->queue)) {
req = list_entry(ep->queue.next,
struct udc_request, queue);
- if (req) {
- /*
- * length bytes transfered
- * check dma done of last desc. in PPBDU mode
- */
- if (use_dma_ppb_du) {
- td = udc_get_last_dma_desc(req);
- if (td) {
- dma_done =
- AMD_GETBITS(td->status,
- UDC_DMA_IN_STS_BS);
- /* don't care DMA done */
- req->req.actual =
- req->req.length;
- }
- } else {
- /* assume all bytes transferred */
+ /*
+ * length bytes transfered
+ * check dma done of last desc. in PPBDU mode
+ */
+ if (use_dma_ppb_du) {
+ td = udc_get_last_dma_desc(req);
+ if (td) {
+ dma_done =
+ AMD_GETBITS(td->status,
+ UDC_DMA_IN_STS_BS);
+ /* don't care DMA done */
req->req.actual = req->req.length;
}
+ } else {
+ /* assume all bytes transferred */
+ req->req.actual = req->req.length;
+ }
- if (req->req.actual == req->req.length) {
- /* complete req */
- complete_req(ep, req, 0);
- req->dma_going = 0;
- /* further request available ? */
- if (list_empty(&ep->queue)) {
- /* disable interrupt */
- tmp = readl(
- &dev->regs->ep_irqmsk);
- tmp |= AMD_BIT(ep->num);
- writel(tmp,
- &dev->regs->ep_irqmsk);
- }
-
+ if (req->req.actual == req->req.length) {
+ /* complete req */
+ complete_req(ep, req, 0);
+ req->dma_going = 0;
+ /* further request available ? */
+ if (list_empty(&ep->queue)) {
+ /* disable interrupt */
+ tmp = readl(&dev->regs->ep_irqmsk);
+ tmp |= AMD_BIT(ep->num);
+ writel(tmp, &dev->regs->ep_irqmsk);
}
}
}
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index 72bae8f39d8..66450a1abc2 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -1754,7 +1754,6 @@ static int __init at91udc_probe(struct platform_device *pdev)
IRQF_DISABLED, driver_name, udc)) {
DBG("request vbus irq %d failed\n",
udc->board.vbus_pin);
- free_irq(udc->udp_irq, udc);
retval = -EBUSY;
goto fail3;
}
diff --git a/drivers/usb/gadget/audio.c b/drivers/usb/gadget/audio.c
index 9f80f4e970b..a3a0f4a27ef 100644
--- a/drivers/usb/gadget/audio.c
+++ b/drivers/usb/gadget/audio.c
@@ -106,20 +106,20 @@ static int audio_set_endpoint_req(struct usb_configuration *c,
ctrl->bRequest, w_value, len, ep);
switch (ctrl->bRequest) {
- case SET_CUR:
+ case UAC_SET_CUR:
value = 0;
break;
- case SET_MIN:
+ case UAC_SET_MIN:
break;
- case SET_MAX:
+ case UAC_SET_MAX:
break;
- case SET_RES:
+ case UAC_SET_RES:
break;
- case SET_MEM:
+ case UAC_SET_MEM:
break;
default:
@@ -142,13 +142,13 @@ static int audio_get_endpoint_req(struct usb_configuration *c,
ctrl->bRequest, w_value, len, ep);
switch (ctrl->bRequest) {
- case GET_CUR:
- case GET_MIN:
- case GET_MAX:
- case GET_RES:
+ case UAC_GET_CUR:
+ case UAC_GET_MIN:
+ case UAC_GET_MAX:
+ case UAC_GET_RES:
value = 3;
break;
- case GET_MEM:
+ case UAC_GET_MEM:
break;
default:
break;
@@ -171,11 +171,11 @@ audio_setup(struct usb_configuration *c, const struct usb_ctrlrequest *ctrl)
* Audio class messages; interface activation uses set_alt().
*/
switch (ctrl->bRequestType) {
- case USB_AUDIO_SET_ENDPOINT:
+ case USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_ENDPOINT:
value = audio_set_endpoint_req(c, ctrl);
break;
- case USB_AUDIO_GET_ENDPOINT:
+ case USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_ENDPOINT:
value = audio_get_endpoint_req(c, ctrl);
break;
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 59e85234fa0..d05397ec8a1 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -602,7 +602,7 @@ static int get_string(struct usb_composite_dev *cdev,
}
}
- for (len = 0; s->wData[len] && len <= 126; len++)
+ for (len = 0; len <= 126 && s->wData[len]; len++)
continue;
if (!len)
return -EINVAL;
diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c
index a56b24d305f..5e096648518 100644
--- a/drivers/usb/gadget/dummy_hcd.c
+++ b/drivers/usb/gadget/dummy_hcd.c
@@ -1306,11 +1306,6 @@ restart:
setup = *(struct usb_ctrlrequest*) urb->setup_packet;
w_index = le16_to_cpu(setup.wIndex);
w_value = le16_to_cpu(setup.wValue);
- if (le16_to_cpu(setup.wLength) !=
- urb->transfer_buffer_length) {
- status = -EOVERFLOW;
- goto return_urb;
- }
/* paranoia, in case of stale queued data */
list_for_each_entry (req, &ep->queue, queue) {
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index bd102f5052b..f37de283d0a 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -61,6 +61,11 @@
* simpler, Microsoft pushes their own approach: RNDIS. The published
* RNDIS specs are ambiguous and appear to be incomplete, and are also
* needlessly complex. They borrow more from CDC ACM than CDC ECM.
+ *
+ * While CDC ECM, CDC Subset, and RNDIS are designed to extend the ethernet
+ * interface to the target, CDC EEM was designed to use ethernet over the USB
+ * link between the host and target. CDC EEM is implemented as an alternative
+ * to those other protocols when that communication model is more appropriate
*/
#define DRIVER_DESC "Ethernet Gadget"
@@ -114,6 +119,7 @@ static inline bool has_rndis(void)
#include "f_rndis.c"
#include "rndis.c"
#endif
+#include "f_eem.c"
#include "u_ether.c"
/*-------------------------------------------------------------------------*/
@@ -150,6 +156,10 @@ static inline bool has_rndis(void)
#define RNDIS_VENDOR_NUM 0x0525 /* NetChip */
#define RNDIS_PRODUCT_NUM 0xa4a2 /* Ethernet/RNDIS Gadget */
+/* For EEM gadgets */
+#define EEM_VENDOR_NUM 0x0525 /* INVALID - NEEDS TO BE ALLOCATED */
+#define EEM_PRODUCT_NUM 0xa4a1 /* INVALID - NEEDS TO BE ALLOCATED */
+
/*-------------------------------------------------------------------------*/
static struct usb_device_descriptor device_desc = {
@@ -246,8 +256,16 @@ static struct usb_configuration rndis_config_driver = {
/*-------------------------------------------------------------------------*/
+#ifdef CONFIG_USB_ETH_EEM
+static int use_eem = 1;
+#else
+static int use_eem;
+#endif
+module_param(use_eem, bool, 0);
+MODULE_PARM_DESC(use_eem, "use CDC EEM mode");
+
/*
- * We _always_ have an ECM or CDC Subset configuration.
+ * We _always_ have an ECM, CDC Subset, or EEM configuration.
*/
static int __init eth_do_config(struct usb_configuration *c)
{
@@ -258,7 +276,9 @@ static int __init eth_do_config(struct usb_configuration *c)
c->bmAttributes |= USB_CONFIG_ATT_WAKEUP;
}
- if (can_support_ecm(c->cdev->gadget))
+ if (use_eem)
+ return eem_bind_config(c);
+ else if (can_support_ecm(c->cdev->gadget))
return ecm_bind_config(c, hostaddr);
else
return geth_bind_config(c, hostaddr);
@@ -286,7 +306,12 @@ static int __init eth_bind(struct usb_composite_dev *cdev)
return status;
/* set up main config label and device descriptor */
- if (can_support_ecm(cdev->gadget)) {
+ if (use_eem) {
+ /* EEM */
+ eth_config_driver.label = "CDC Ethernet (EEM)";
+ device_desc.idVendor = cpu_to_le16(EEM_VENDOR_NUM);
+ device_desc.idProduct = cpu_to_le16(EEM_PRODUCT_NUM);
+ } else if (can_support_ecm(cdev->gadget)) {
/* ECM */
eth_config_driver.label = "CDC Ethernet (ECM)";
} else {
diff --git a/drivers/usb/gadget/f_audio.c b/drivers/usb/gadget/f_audio.c
index 66527ba2d2e..98e9bb97729 100644
--- a/drivers/usb/gadget/f_audio.c
+++ b/drivers/usb/gadget/f_audio.c
@@ -28,6 +28,9 @@ static int audio_buf_size = 48000;
module_param(audio_buf_size, int, S_IRUGO);
MODULE_PARM_DESC(audio_buf_size, "Audio buffer size");
+static int generic_set_cmd(struct usb_audio_control *con, u8 cmd, int value);
+static int generic_get_cmd(struct usb_audio_control *con, u8 cmd);
+
/*
* DESCRIPTORS ... most are static, but strings and full
* configuration descriptors are built on demand.
@@ -50,16 +53,16 @@ static struct usb_interface_descriptor ac_interface_desc __initdata = {
.bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL,
};
-DECLARE_USB_AC_HEADER_DESCRIPTOR(2);
+DECLARE_UAC_AC_HEADER_DESCRIPTOR(2);
-#define USB_DT_AC_HEADER_LENGH USB_DT_AC_HEADER_SIZE(F_AUDIO_NUM_INTERFACES)
+#define UAC_DT_AC_HEADER_LENGTH UAC_DT_AC_HEADER_SIZE(F_AUDIO_NUM_INTERFACES)
/* B.3.2 Class-Specific AC Interface Descriptor */
-static struct usb_ac_header_descriptor_2 ac_header_desc = {
- .bLength = USB_DT_AC_HEADER_LENGH,
+static struct uac_ac_header_descriptor_2 ac_header_desc = {
+ .bLength = UAC_DT_AC_HEADER_LENGTH,
.bDescriptorType = USB_DT_CS_INTERFACE,
- .bDescriptorSubtype = HEADER,
+ .bDescriptorSubtype = UAC_HEADER,
.bcdADC = __constant_cpu_to_le16(0x0100),
- .wTotalLength = __constant_cpu_to_le16(USB_DT_AC_HEADER_LENGH),
+ .wTotalLength = __constant_cpu_to_le16(UAC_DT_AC_HEADER_LENGTH),
.bInCollection = F_AUDIO_NUM_INTERFACES,
.baInterfaceNr = {
[0] = F_AUDIO_AC_INTERFACE,
@@ -68,33 +71,33 @@ static struct usb_ac_header_descriptor_2 ac_header_desc = {
};
#define INPUT_TERMINAL_ID 1
-static struct usb_input_terminal_descriptor input_terminal_desc = {
- .bLength = USB_DT_AC_INPUT_TERMINAL_SIZE,
+static struct uac_input_terminal_descriptor input_terminal_desc = {
+ .bLength = UAC_DT_INPUT_TERMINAL_SIZE,
.bDescriptorType = USB_DT_CS_INTERFACE,
- .bDescriptorSubtype = INPUT_TERMINAL,
+ .bDescriptorSubtype = UAC_INPUT_TERMINAL,
.bTerminalID = INPUT_TERMINAL_ID,
- .wTerminalType = USB_AC_TERMINAL_STREAMING,
+ .wTerminalType = UAC_TERMINAL_STREAMING,
.bAssocTerminal = 0,
.wChannelConfig = 0x3,
};
-DECLARE_USB_AC_FEATURE_UNIT_DESCRIPTOR(0);
+DECLARE_UAC_FEATURE_UNIT_DESCRIPTOR(0);
#define FEATURE_UNIT_ID 2
-static struct usb_ac_feature_unit_descriptor_0 feature_unit_desc = {
- .bLength = USB_DT_AC_FEATURE_UNIT_SIZE(0),
+static struct uac_feature_unit_descriptor_0 feature_unit_desc = {
+ .bLength = UAC_DT_FEATURE_UNIT_SIZE(0),
.bDescriptorType = USB_DT_CS_INTERFACE,
- .bDescriptorSubtype = FEATURE_UNIT,
+ .bDescriptorSubtype = UAC_FEATURE_UNIT,
.bUnitID = FEATURE_UNIT_ID,
.bSourceID = INPUT_TERMINAL_ID,
.bControlSize = 2,
- .bmaControls[0] = (FU_MUTE | FU_VOLUME),
+ .bmaControls[0] = (UAC_FU_MUTE | UAC_FU_VOLUME),
};
static struct usb_audio_control mute_control = {
.list = LIST_HEAD_INIT(mute_control.list),
.name = "Mute Control",
- .type = MUTE_CONTROL,
+ .type = UAC_MUTE_CONTROL,
/* Todo: add real Mute control code */
.set = generic_set_cmd,
.get = generic_get_cmd,
@@ -103,7 +106,7 @@ static struct usb_audio_control mute_control = {
static struct usb_audio_control volume_control = {
.list = LIST_HEAD_INIT(volume_control.list),
.name = "Volume Control",
- .type = VOLUME_CONTROL,
+ .type = UAC_VOLUME_CONTROL,
/* Todo: add real Volume control code */
.set = generic_set_cmd,
.get = generic_get_cmd,
@@ -113,17 +116,17 @@ static struct usb_audio_control_selector feature_unit = {
.list = LIST_HEAD_INIT(feature_unit.list),
.id = FEATURE_UNIT_ID,
.name = "Mute & Volume Control",
- .type = FEATURE_UNIT,
+ .type = UAC_FEATURE_UNIT,
.desc = (struct usb_descriptor_header *)&feature_unit_desc,
};
#define OUTPUT_TERMINAL_ID 3
-static struct usb_output_terminal_descriptor output_terminal_desc = {
- .bLength = USB_DT_AC_OUTPUT_TERMINAL_SIZE,
+static struct uac_output_terminal_descriptor output_terminal_desc = {
+ .bLength = UAC_DT_OUTPUT_TERMINAL_SIZE,
.bDescriptorType = USB_DT_CS_INTERFACE,
- .bDescriptorSubtype = OUTPUT_TERMINAL,
+ .bDescriptorSubtype = UAC_OUTPUT_TERMINAL,
.bTerminalID = OUTPUT_TERMINAL_ID,
- .wTerminalType = USB_AC_OUTPUT_TERMINAL_SPEAKER,
+ .wTerminalType = UAC_OUTPUT_TERMINAL_SPEAKER,
.bAssocTerminal = FEATURE_UNIT_ID,
.bSourceID = FEATURE_UNIT_ID,
};
@@ -148,22 +151,22 @@ static struct usb_interface_descriptor as_interface_alt_1_desc = {
};
/* B.4.2 Class-Specific AS Interface Descriptor */
-static struct usb_as_header_descriptor as_header_desc = {
- .bLength = USB_DT_AS_HEADER_SIZE,
+static struct uac_as_header_descriptor as_header_desc = {
+ .bLength = UAC_DT_AS_HEADER_SIZE,
.bDescriptorType = USB_DT_CS_INTERFACE,
- .bDescriptorSubtype = AS_GENERAL,
+ .bDescriptorSubtype = UAC_AS_GENERAL,
.bTerminalLink = INPUT_TERMINAL_ID,
.bDelay = 1,
- .wFormatTag = USB_AS_AUDIO_FORMAT_TYPE_I_PCM,
+ .wFormatTag = UAC_FORMAT_TYPE_I_PCM,
};
-DECLARE_USB_AS_FORMAT_TYPE_I_DISCRETE_DESC(1);
+DECLARE_UAC_FORMAT_TYPE_I_DISCRETE_DESC(1);
-static struct usb_as_formate_type_i_discrete_descriptor_1 as_type_i_desc = {
- .bLength = USB_AS_FORMAT_TYPE_I_DISCRETE_DESC_SIZE(1),
+static struct uac_format_type_i_discrete_descriptor_1 as_type_i_desc = {
+ .bLength = UAC_FORMAT_TYPE_I_DISCRETE_DESC_SIZE(1),
.bDescriptorType = USB_DT_CS_INTERFACE,
- .bDescriptorSubtype = FORMAT_TYPE,
- .bFormatType = USB_AS_FORMAT_TYPE_I,
+ .bDescriptorSubtype = UAC_FORMAT_TYPE,
+ .bFormatType = UAC_FORMAT_TYPE_I,
.bSubframeSize = 2,
.bBitResolution = 16,
.bSamFreqType = 1,
@@ -174,17 +177,17 @@ static struct usb_endpoint_descriptor as_out_ep_desc __initdata = {
.bLength = USB_DT_ENDPOINT_AUDIO_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = USB_DIR_OUT,
- .bmAttributes = USB_AS_ENDPOINT_ADAPTIVE
+ .bmAttributes = USB_ENDPOINT_SYNC_ADAPTIVE
| USB_ENDPOINT_XFER_ISOC,
.wMaxPacketSize = __constant_cpu_to_le16(OUT_EP_MAX_PACKET_SIZE),
.bInterval = 4,
};
/* Class-specific AS ISO OUT Endpoint Descriptor */
-static struct usb_as_iso_endpoint_descriptor as_iso_out_desc __initdata = {
- .bLength = USB_AS_ISO_ENDPOINT_DESC_SIZE,
+static struct uac_iso_endpoint_descriptor as_iso_out_desc __initdata = {
+ .bLength = UAC_ISO_ENDPOINT_DESC_SIZE,
.bDescriptorType = USB_DT_CS_ENDPOINT,
- .bDescriptorSubtype = EP_GENERAL,
+ .bDescriptorSubtype = UAC_EP_GENERAL,
.bmAttributes = 1,
.bLockDelayUnits = 1,
.wLockDelay = __constant_cpu_to_le16(1),
@@ -456,11 +459,11 @@ f_audio_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl)
* Audio class messages; interface activation uses set_alt().
*/
switch (ctrl->bRequestType) {
- case USB_AUDIO_SET_INTF:
+ case USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE:
value = audio_set_intf_req(f, ctrl);
break;
- case USB_AUDIO_GET_INTF:
+ case USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE:
value = audio_get_intf_req(f, ctrl);
break;
@@ -632,6 +635,18 @@ f_audio_unbind(struct usb_configuration *c, struct usb_function *f)
/*-------------------------------------------------------------------------*/
+static int generic_set_cmd(struct usb_audio_control *con, u8 cmd, int value)
+{
+ con->data[cmd] = value;
+
+ return 0;
+}
+
+static int generic_get_cmd(struct usb_audio_control *con, u8 cmd)
+{
+ return con->data[cmd];
+}
+
/* Todo: add more control selecotor dynamically */
int __init control_selector_init(struct f_audio *audio)
{
@@ -642,10 +657,10 @@ int __init control_selector_init(struct f_audio *audio)
list_add(&mute_control.list, &feature_unit.control);
list_add(&volume_control.list, &feature_unit.control);
- volume_control.data[_CUR] = 0xffc0;
- volume_control.data[_MIN] = 0xe3a0;
- volume_control.data[_MAX] = 0xfff0;
- volume_control.data[_RES] = 0x0030;
+ volume_control.data[UAC__CUR] = 0xffc0;
+ volume_control.data[UAC__MIN] = 0xe3a0;
+ volume_control.data[UAC__MAX] = 0xfff0;
+ volume_control.data[UAC__RES] = 0x0030;
return 0;
}
diff --git a/drivers/usb/gadget/f_eem.c b/drivers/usb/gadget/f_eem.c
new file mode 100644
index 00000000000..0a577d5694f
--- /dev/null
+++ b/drivers/usb/gadget/f_eem.c
@@ -0,0 +1,562 @@
+/*
+ * f_eem.c -- USB CDC Ethernet (EEM) link function driver
+ *
+ * Copyright (C) 2003-2005,2008 David Brownell
+ * Copyright (C) 2008 Nokia Corporation
+ * Copyright (C) 2009 EF Johnson Technologies
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/etherdevice.h>
+#include <linux/crc32.h>
+
+#include "u_ether.h"
+
+#define EEM_HLEN 2
+
+/*
+ * This function is a "CDC Ethernet Emulation Model" (CDC EEM)
+ * Ethernet link.
+ */
+
+struct eem_ep_descs {
+ struct usb_endpoint_descriptor *in;
+ struct usb_endpoint_descriptor *out;
+};
+
+struct f_eem {
+ struct gether port;
+ u8 ctrl_id;
+
+ struct eem_ep_descs fs;
+ struct eem_ep_descs hs;
+};
+
+static inline struct f_eem *func_to_eem(struct usb_function *f)
+{
+ return container_of(f, struct f_eem, port.func);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* interface descriptor: */
+
+static struct usb_interface_descriptor eem_intf __initdata = {
+ .bLength = sizeof eem_intf,
+ .bDescriptorType = USB_DT_INTERFACE,
+
+ /* .bInterfaceNumber = DYNAMIC */
+ .bNumEndpoints = 2,
+ .bInterfaceClass = USB_CLASS_COMM,
+ .bInterfaceSubClass = USB_CDC_SUBCLASS_EEM,
+ .bInterfaceProtocol = USB_CDC_PROTO_EEM,
+ /* .iInterface = DYNAMIC */
+};
+
+/* full speed support: */
+
+static struct usb_endpoint_descriptor eem_fs_in_desc __initdata = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ .bEndpointAddress = USB_DIR_IN,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+};
+
+static struct usb_endpoint_descriptor eem_fs_out_desc __initdata = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ .bEndpointAddress = USB_DIR_OUT,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+};
+
+static struct usb_descriptor_header *eem_fs_function[] __initdata = {
+ /* CDC EEM control descriptors */
+ (struct usb_descriptor_header *) &eem_intf,
+ (struct usb_descriptor_header *) &eem_fs_in_desc,
+ (struct usb_descriptor_header *) &eem_fs_out_desc,
+ NULL,
+};
+
+/* high speed support: */
+
+static struct usb_endpoint_descriptor eem_hs_in_desc __initdata = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ .bEndpointAddress = USB_DIR_IN,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ .wMaxPacketSize = cpu_to_le16(512),
+};
+
+static struct usb_endpoint_descriptor eem_hs_out_desc __initdata = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ .bEndpointAddress = USB_DIR_OUT,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ .wMaxPacketSize = cpu_to_le16(512),
+};
+
+static struct usb_descriptor_header *eem_hs_function[] __initdata = {
+ /* CDC EEM control descriptors */
+ (struct usb_descriptor_header *) &eem_intf,
+ (struct usb_descriptor_header *) &eem_hs_in_desc,
+ (struct usb_descriptor_header *) &eem_hs_out_desc,
+ NULL,
+};
+
+/* string descriptors: */
+
+static struct usb_string eem_string_defs[] = {
+ [0].s = "CDC Ethernet Emulation Model (EEM)",
+ { } /* end of list */
+};
+
+static struct usb_gadget_strings eem_string_table = {
+ .language = 0x0409, /* en-us */
+ .strings = eem_string_defs,
+};
+
+static struct usb_gadget_strings *eem_strings[] = {
+ &eem_string_table,
+ NULL,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static int eem_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl)
+{
+ struct usb_composite_dev *cdev = f->config->cdev;
+ int value = -EOPNOTSUPP;
+ u16 w_index = le16_to_cpu(ctrl->wIndex);
+ u16 w_value = le16_to_cpu(ctrl->wValue);
+ u16 w_length = le16_to_cpu(ctrl->wLength);
+
+ DBG(cdev, "invalid control req%02x.%02x v%04x i%04x l%d\n",
+ ctrl->bRequestType, ctrl->bRequest,
+ w_value, w_index, w_length);
+
+ /* device either stalls (value < 0) or reports success */
+ return value;
+}
+
+
+static int eem_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
+{
+ struct f_eem *eem = func_to_eem(f);
+ struct usb_composite_dev *cdev = f->config->cdev;
+ struct net_device *net;
+
+ /* we know alt == 0, so this is an activation or a reset */
+ if (alt != 0)
+ goto fail;
+
+ if (intf == eem->ctrl_id) {
+
+ if (eem->port.in_ep->driver_data) {
+ DBG(cdev, "reset eem\n");
+ gether_disconnect(&eem->port);
+ }
+
+ if (!eem->port.in) {
+ DBG(cdev, "init eem\n");
+ eem->port.in = ep_choose(cdev->gadget,
+ eem->hs.in, eem->fs.in);
+ eem->port.out = ep_choose(cdev->gadget,
+ eem->hs.out, eem->fs.out);
+ }
+
+ /* zlps should not occur because zero-length EEM packets
+ * will be inserted in those cases where they would occur
+ */
+ eem->port.is_zlp_ok = 1;
+ eem->port.cdc_filter = DEFAULT_FILTER;
+ DBG(cdev, "activate eem\n");
+ net = gether_connect(&eem->port);
+ if (IS_ERR(net))
+ return PTR_ERR(net);
+ } else
+ goto fail;
+
+ return 0;
+fail:
+ return -EINVAL;
+}
+
+static void eem_disable(struct usb_function *f)
+{
+ struct f_eem *eem = func_to_eem(f);
+ struct usb_composite_dev *cdev = f->config->cdev;
+
+ DBG(cdev, "eem deactivated\n");
+
+ if (eem->port.in_ep->driver_data)
+ gether_disconnect(&eem->port);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* EEM function driver setup/binding */
+
+static int __init
+eem_bind(struct usb_configuration *c, struct usb_function *f)
+{
+ struct usb_composite_dev *cdev = c->cdev;
+ struct f_eem *eem = func_to_eem(f);
+ int status;
+ struct usb_ep *ep;
+
+ /* allocate instance-specific interface IDs */
+ status = usb_interface_id(c, f);
+ if (status < 0)
+ goto fail;
+ eem->ctrl_id = status;
+ eem_intf.bInterfaceNumber = status;
+
+ status = -ENODEV;
+
+ /* allocate instance-specific endpoints */
+ ep = usb_ep_autoconfig(cdev->gadget, &eem_fs_in_desc);
+ if (!ep)
+ goto fail;
+ eem->port.in_ep = ep;
+ ep->driver_data = cdev; /* claim */
+
+ ep = usb_ep_autoconfig(cdev->gadget, &eem_fs_out_desc);
+ if (!ep)
+ goto fail;
+ eem->port.out_ep = ep;
+ ep->driver_data = cdev; /* claim */
+
+ status = -ENOMEM;
+
+ /* copy descriptors, and track endpoint copies */
+ f->descriptors = usb_copy_descriptors(eem_fs_function);
+ if (!f->descriptors)
+ goto fail;
+
+ eem->fs.in = usb_find_endpoint(eem_fs_function,
+ f->descriptors, &eem_fs_in_desc);
+ eem->fs.out = usb_find_endpoint(eem_fs_function,
+ f->descriptors, &eem_fs_out_desc);
+
+ /* support all relevant hardware speeds... we expect that when
+ * hardware is dual speed, all bulk-capable endpoints work at
+ * both speeds
+ */
+ if (gadget_is_dualspeed(c->cdev->gadget)) {
+ eem_hs_in_desc.bEndpointAddress =
+ eem_fs_in_desc.bEndpointAddress;
+ eem_hs_out_desc.bEndpointAddress =
+ eem_fs_out_desc.bEndpointAddress;
+
+ /* copy descriptors, and track endpoint copies */
+ f->hs_descriptors = usb_copy_descriptors(eem_hs_function);
+ if (!f->hs_descriptors)
+ goto fail;
+
+ eem->hs.in = usb_find_endpoint(eem_hs_function,
+ f->hs_descriptors, &eem_hs_in_desc);
+ eem->hs.out = usb_find_endpoint(eem_hs_function,
+ f->hs_descriptors, &eem_hs_out_desc);
+ }
+
+ DBG(cdev, "CDC Ethernet (EEM): %s speed IN/%s OUT/%s\n",
+ gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full",
+ eem->port.in_ep->name, eem->port.out_ep->name);
+ return 0;
+
+fail:
+ if (f->descriptors)
+ usb_free_descriptors(f->descriptors);
+
+ /* we might as well release our claims on endpoints */
+ if (eem->port.out)
+ eem->port.out_ep->driver_data = NULL;
+ if (eem->port.in)
+ eem->port.in_ep->driver_data = NULL;
+
+ ERROR(cdev, "%s: can't bind, err %d\n", f->name, status);
+
+ return status;
+}
+
+static void
+eem_unbind(struct usb_configuration *c, struct usb_function *f)
+{
+ struct f_eem *eem = func_to_eem(f);
+
+ DBG(c->cdev, "eem unbind\n");
+
+ if (gadget_is_dualspeed(c->cdev->gadget))
+ usb_free_descriptors(f->hs_descriptors);
+ usb_free_descriptors(f->descriptors);
+ kfree(eem);
+}
+
+static void eem_cmd_complete(struct usb_ep *ep, struct usb_request *req)
+{
+}
+
+/*
+ * Add the EEM header and ethernet checksum.
+ * We currently do not attempt to put multiple ethernet frames
+ * into a single USB transfer
+ */
+static struct sk_buff *eem_wrap(struct gether *port, struct sk_buff *skb)
+{
+ struct sk_buff *skb2 = NULL;
+ struct usb_ep *in = port->in_ep;
+ int padlen = 0;
+ u16 len = skb->len;
+
+ if (!skb_cloned(skb)) {
+ int headroom = skb_headroom(skb);
+ int tailroom = skb_tailroom(skb);
+
+ /* When (len + EEM_HLEN + ETH_FCS_LEN) % in->maxpacket) is 0,
+ * stick two bytes of zero-length EEM packet on the end.
+ */
+ if (((len + EEM_HLEN + ETH_FCS_LEN) % in->maxpacket) == 0)
+ padlen += 2;
+
+ if ((tailroom >= (ETH_FCS_LEN + padlen)) &&
+ (headroom >= EEM_HLEN))
+ goto done;
+ }
+
+ skb2 = skb_copy_expand(skb, EEM_HLEN, ETH_FCS_LEN + padlen, GFP_ATOMIC);
+ dev_kfree_skb_any(skb);
+ skb = skb2;
+ if (!skb)
+ return skb;
+
+done:
+ /* use the "no CRC" option */
+ put_unaligned_be32(0xdeadbeef, skb_put(skb, 4));
+
+ /* EEM packet header format:
+ * b0..13: length of ethernet frame
+ * b14: bmCRC (0 == sentinel CRC)
+ * b15: bmType (0 == data)
+ */
+ len = skb->len;
+ put_unaligned_le16((len & 0x3FFF) | BIT(14), skb_push(skb, 2));
+
+ /* add a zero-length EEM packet, if needed */
+ if (padlen)
+ put_unaligned_le16(0, skb_put(skb, 2));
+
+ return skb;
+}
+
+/*
+ * Remove the EEM header. Note that there can be many EEM packets in a single
+ * USB transfer, so we need to break them out and handle them independently.
+ */
+static int eem_unwrap(struct gether *port,
+ struct sk_buff *skb,
+ struct sk_buff_head *list)
+{
+ struct usb_composite_dev *cdev = port->func.config->cdev;
+ int status = 0;
+
+ do {
+ struct sk_buff *skb2;
+ u16 header;
+ u16 len = 0;
+
+ if (skb->len < EEM_HLEN) {
+ status = -EINVAL;
+ DBG(cdev, "invalid EEM header\n");
+ goto error;
+ }
+
+ /* remove the EEM header */
+ header = get_unaligned_le16(skb->data);
+ skb_pull(skb, EEM_HLEN);
+
+ /* EEM packet header format:
+ * b0..14: EEM type dependent (data or command)
+ * b15: bmType (0 == data, 1 == command)
+ */
+ if (header & BIT(15)) {
+ struct usb_request *req = cdev->req;
+ u16 bmEEMCmd;
+
+ /* EEM command packet format:
+ * b0..10: bmEEMCmdParam
+ * b11..13: bmEEMCmd
+ * b14: reserved (must be zero)
+ * b15: bmType (1 == command)
+ */
+ if (header & BIT(14))
+ continue;
+
+ bmEEMCmd = (header >> 11) & 0x7;
+ switch (bmEEMCmd) {
+ case 0: /* echo */
+ len = header & 0x7FF;
+ if (skb->len < len) {
+ status = -EOVERFLOW;
+ goto error;
+ }
+
+ skb2 = skb_clone(skb, GFP_ATOMIC);
+ if (unlikely(!skb2)) {
+ DBG(cdev, "EEM echo response error\n");
+ goto next;
+ }
+ skb_trim(skb2, len);
+ put_unaligned_le16(BIT(15) | BIT(11) | len,
+ skb_push(skb2, 2));
+ skb_copy_bits(skb, 0, req->buf, skb->len);
+ req->length = skb->len;
+ req->complete = eem_cmd_complete;
+ req->zero = 1;
+ if (usb_ep_queue(port->in_ep, req, GFP_ATOMIC))
+ DBG(cdev, "echo response queue fail\n");
+ break;
+
+ case 1: /* echo response */
+ case 2: /* suspend hint */
+ case 3: /* response hint */
+ case 4: /* response complete hint */
+ case 5: /* tickle */
+ default: /* reserved */
+ continue;
+ }
+ } else {
+ u32 crc, crc2;
+ struct sk_buff *skb3;
+
+ /* check for zero-length EEM packet */
+ if (header == 0)
+ continue;
+
+ /* EEM data packet format:
+ * b0..13: length of ethernet frame
+ * b14: bmCRC (0 == sentinel, 1 == calculated)
+ * b15: bmType (0 == data)
+ */
+ len = header & 0x3FFF;
+ if ((skb->len < len)
+ || (len < (ETH_HLEN + ETH_FCS_LEN))) {
+ status = -EINVAL;
+ goto error;
+ }
+
+ /* validate CRC */
+ crc = get_unaligned_le32(skb->data + len - ETH_FCS_LEN);
+ if (header & BIT(14)) {
+ crc = get_unaligned_le32(skb->data + len
+ - ETH_FCS_LEN);
+ crc2 = ~crc32_le(~0,
+ skb->data,
+ skb->len - ETH_FCS_LEN);
+ } else {
+ crc = get_unaligned_be32(skb->data + len
+ - ETH_FCS_LEN);
+ crc2 = 0xdeadbeef;
+ }
+ if (crc != crc2) {
+ DBG(cdev, "invalid EEM CRC\n");
+ goto next;
+ }
+
+ skb2 = skb_clone(skb, GFP_ATOMIC);
+ if (unlikely(!skb2)) {
+ DBG(cdev, "unable to unframe EEM packet\n");
+ continue;
+ }
+ skb_trim(skb2, len - ETH_FCS_LEN);
+
+ skb3 = skb_copy_expand(skb2,
+ NET_IP_ALIGN,
+ 0,
+ GFP_ATOMIC);
+ if (unlikely(!skb3)) {
+ DBG(cdev, "unable to realign EEM packet\n");
+ dev_kfree_skb_any(skb2);
+ continue;
+ }
+ dev_kfree_skb_any(skb2);
+ skb_queue_tail(list, skb3);
+ }
+next:
+ skb_pull(skb, len);
+ } while (skb->len);
+
+error:
+ dev_kfree_skb_any(skb);
+ return status;
+}
+
+/**
+ * eem_bind_config - add CDC Ethernet (EEM) network link to a configuration
+ * @c: the configuration to support the network link
+ * Context: single threaded during gadget setup
+ *
+ * Returns zero on success, else negative errno.
+ *
+ * Caller must have called @gether_setup(). Caller is also responsible
+ * for calling @gether_cleanup() before module unload.
+ */
+int __init eem_bind_config(struct usb_configuration *c)
+{
+ struct f_eem *eem;
+ int status;
+
+ /* maybe allocate device-global string IDs */
+ if (eem_string_defs[0].id == 0) {
+
+ /* control interface label */
+ status = usb_string_id(c->cdev);
+ if (status < 0)
+ return status;
+ eem_string_defs[0].id = status;
+ eem_intf.iInterface = status;
+ }
+
+ /* allocate and initialize one new instance */
+ eem = kzalloc(sizeof *eem, GFP_KERNEL);
+ if (!eem)
+ return -ENOMEM;
+
+ eem->port.cdc_filter = DEFAULT_FILTER;
+
+ eem->port.func.name = "cdc_eem";
+ eem->port.func.strings = eem_strings;
+ /* descriptors are per-instance copies */
+ eem->port.func.bind = eem_bind;
+ eem->port.func.unbind = eem_unbind;
+ eem->port.func.set_alt = eem_set_alt;
+ eem->port.func.setup = eem_setup;
+ eem->port.func.disable = eem_disable;
+ eem->port.wrap = eem_wrap;
+ eem->port.unwrap = eem_unwrap;
+ eem->port.header_len = EEM_HLEN;
+
+ status = usb_add_function(c, &eem->port.func);
+ if (status)
+ kfree(eem);
+ return status;
+}
+
diff --git a/drivers/usb/gadget/f_rndis.c b/drivers/usb/gadget/f_rndis.c
index 424a37c5773..c9966cc07d3 100644
--- a/drivers/usb/gadget/f_rndis.c
+++ b/drivers/usb/gadget/f_rndis.c
@@ -286,12 +286,17 @@ static struct usb_gadget_strings *rndis_strings[] = {
/*-------------------------------------------------------------------------*/
-static struct sk_buff *rndis_add_header(struct sk_buff *skb)
+static struct sk_buff *rndis_add_header(struct gether *port,
+ struct sk_buff *skb)
{
- skb = skb_realloc_headroom(skb, sizeof(struct rndis_packet_msg_type));
- if (skb)
- rndis_add_hdr(skb);
- return skb;
+ struct sk_buff *skb2;
+
+ skb2 = skb_realloc_headroom(skb, sizeof(struct rndis_packet_msg_type));
+ if (skb2)
+ rndis_add_hdr(skb2);
+
+ dev_kfree_skb_any(skb);
+ return skb2;
}
static void rndis_response_available(void *_rndis)
diff --git a/drivers/usb/gadget/fsl_qe_udc.c b/drivers/usb/gadget/fsl_qe_udc.c
index d701bf4698d..7881f12413c 100644
--- a/drivers/usb/gadget/fsl_qe_udc.c
+++ b/drivers/usb/gadget/fsl_qe_udc.c
@@ -2751,6 +2751,10 @@ static int __devexit qe_udc_remove(struct of_device *ofdev)
/*-------------------------------------------------------------------------*/
static struct of_device_id __devinitdata qe_udc_match[] = {
{
+ .compatible = "fsl,mpc8323-qe-usb",
+ .data = (void *)PORT_QE,
+ },
+ {
.compatible = "fsl,mpc8360-qe-usb",
.data = (void *)PORT_QE,
},
diff --git a/drivers/usb/gadget/gmidi.c b/drivers/usb/gadget/gmidi.c
index b9312dc6e04..d0b1e836f0e 100644
--- a/drivers/usb/gadget/gmidi.c
+++ b/drivers/usb/gadget/gmidi.c
@@ -191,7 +191,7 @@ module_param(qlen, uint, S_IRUGO);
#define GMIDI_MS_INTERFACE 1
#define GMIDI_NUM_INTERFACES 2
-DECLARE_USB_AC_HEADER_DESCRIPTOR(1);
+DECLARE_UAC_AC_HEADER_DESCRIPTOR(1);
DECLARE_USB_MIDI_OUT_JACK_DESCRIPTOR(1);
DECLARE_USB_MS_ENDPOINT_DESCRIPTOR(1);
@@ -237,12 +237,12 @@ static const struct usb_interface_descriptor ac_interface_desc = {
};
/* B.3.2 Class-Specific AC Interface Descriptor */
-static const struct usb_ac_header_descriptor_1 ac_header_desc = {
- .bLength = USB_DT_AC_HEADER_SIZE(1),
+static const struct uac_ac_header_descriptor_1 ac_header_desc = {
+ .bLength = UAC_DT_AC_HEADER_SIZE(1),
.bDescriptorType = USB_DT_CS_INTERFACE,
.bDescriptorSubtype = USB_MS_HEADER,
.bcdADC = cpu_to_le16(0x0100),
- .wTotalLength = cpu_to_le16(USB_DT_AC_HEADER_SIZE(1)),
+ .wTotalLength = cpu_to_le16(UAC_DT_AC_HEADER_SIZE(1)),
.bInCollection = 1,
.baInterfaceNr = {
[0] = GMIDI_MS_INTERFACE,
diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c
index ed21e263f83..e6fedbd5a65 100644
--- a/drivers/usb/gadget/pxa25x_udc.c
+++ b/drivers/usb/gadget/pxa25x_udc.c
@@ -56,6 +56,7 @@
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
+#include <linux/usb/otg.h>
/*
* This driver is PXA25x only. Grab the right register definitions.
@@ -1008,15 +1009,27 @@ static int pxa25x_udc_pullup(struct usb_gadget *_gadget, int is_active)
return 0;
}
+/* boards may consume current from VBUS, up to 100-500mA based on config.
+ * the 500uA suspend ceiling means that exclusively vbus-powered PXA designs
+ * violate USB specs.
+ */
+static int pxa25x_udc_vbus_draw(struct usb_gadget *_gadget, unsigned mA)
+{
+ struct pxa25x_udc *udc;
+
+ udc = container_of(_gadget, struct pxa25x_udc, gadget);
+
+ if (udc->transceiver)
+ return otg_set_power(udc->transceiver, mA);
+ return -EOPNOTSUPP;
+}
+
static const struct usb_gadget_ops pxa25x_udc_ops = {
.get_frame = pxa25x_udc_get_frame,
.wakeup = pxa25x_udc_wakeup,
.vbus_session = pxa25x_udc_vbus_session,
.pullup = pxa25x_udc_pullup,
-
- // .vbus_draw ... boards may consume current from VBUS, up to
- // 100-500mA based on config. the 500uA suspend ceiling means
- // that exclusively vbus-powered PXA designs violate USB specs.
+ .vbus_draw = pxa25x_udc_vbus_draw,
};
/*-------------------------------------------------------------------------*/
@@ -1303,9 +1316,23 @@ fail:
* for set_configuration as well as eventual disconnect.
*/
DMSG("registered gadget driver '%s'\n", driver->driver.name);
+
+ /* connect to bus through transceiver */
+ if (dev->transceiver) {
+ retval = otg_set_peripheral(dev->transceiver, &dev->gadget);
+ if (retval) {
+ DMSG("can't bind to transceiver\n");
+ if (driver->unbind)
+ driver->unbind(&dev->gadget);
+ goto bind_fail;
+ }
+ }
+
pullup(dev);
dump_state(dev);
return 0;
+bind_fail:
+ return retval;
}
EXPORT_SYMBOL(usb_gadget_register_driver);
@@ -1351,6 +1378,9 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
stop_activity(dev, driver);
local_irq_enable();
+ if (dev->transceiver)
+ (void) otg_set_peripheral(dev->transceiver, NULL);
+
driver->unbind(&dev->gadget);
dev->gadget.dev.driver = NULL;
dev->driver = NULL;
@@ -2162,6 +2192,8 @@ static int __init pxa25x_udc_probe(struct platform_device *pdev)
dev->dev = &pdev->dev;
dev->mach = pdev->dev.platform_data;
+ dev->transceiver = otg_get_transceiver();
+
if (gpio_is_valid(dev->mach->gpio_vbus)) {
if ((retval = gpio_request(dev->mach->gpio_vbus,
"pxa25x_udc GPIO VBUS"))) {
@@ -2264,6 +2296,10 @@ lubbock_fail0:
if (gpio_is_valid(dev->mach->gpio_vbus))
gpio_free(dev->mach->gpio_vbus);
err_gpio_vbus:
+ if (dev->transceiver) {
+ otg_put_transceiver(dev->transceiver);
+ dev->transceiver = NULL;
+ }
clk_put(dev->clk);
err_clk:
return retval;
@@ -2305,6 +2341,11 @@ static int __exit pxa25x_udc_remove(struct platform_device *pdev)
clk_put(dev->clk);
+ if (dev->transceiver) {
+ otg_put_transceiver(dev->transceiver);
+ dev->transceiver = NULL;
+ }
+
platform_set_drvdata(pdev, NULL);
the_controller = NULL;
return 0;
diff --git a/drivers/usb/gadget/pxa25x_udc.h b/drivers/usb/gadget/pxa25x_udc.h
index 1d51aa21e6e..f572c561746 100644
--- a/drivers/usb/gadget/pxa25x_udc.h
+++ b/drivers/usb/gadget/pxa25x_udc.h
@@ -128,6 +128,7 @@ struct pxa25x_udc {
struct device *dev;
struct clk *clk;
struct pxa2xx_udc_mach_info *mach;
+ struct otg_transceiver *transceiver;
u64 dma_mask;
struct pxa25x_ep ep [PXA_UDC_NUM_ENDPOINTS];
diff --git a/drivers/usb/gadget/rndis.c b/drivers/usb/gadget/rndis.c
index ca41b0b5afb..48267bc0b2e 100644
--- a/drivers/usb/gadget/rndis.c
+++ b/drivers/usb/gadget/rndis.c
@@ -1022,22 +1022,29 @@ static rndis_resp_t *rndis_add_response (int configNr, u32 length)
return r;
}
-int rndis_rm_hdr(struct sk_buff *skb)
+int rndis_rm_hdr(struct gether *port,
+ struct sk_buff *skb,
+ struct sk_buff_head *list)
{
/* tmp points to a struct rndis_packet_msg_type */
__le32 *tmp = (void *) skb->data;
/* MessageType, MessageLength */
if (cpu_to_le32(REMOTE_NDIS_PACKET_MSG)
- != get_unaligned(tmp++))
+ != get_unaligned(tmp++)) {
+ dev_kfree_skb_any(skb);
return -EINVAL;
+ }
tmp++;
/* DataOffset, DataLength */
- if (!skb_pull(skb, get_unaligned_le32(tmp++) + 8))
+ if (!skb_pull(skb, get_unaligned_le32(tmp++) + 8)) {
+ dev_kfree_skb_any(skb);
return -EOVERFLOW;
+ }
skb_trim(skb, get_unaligned_le32(tmp++));
+ skb_queue_tail(list, skb);
return 0;
}
diff --git a/drivers/usb/gadget/rndis.h b/drivers/usb/gadget/rndis.h
index aac61dfe0f0..c236aaa9dcd 100644
--- a/drivers/usb/gadget/rndis.h
+++ b/drivers/usb/gadget/rndis.h
@@ -251,7 +251,8 @@ int rndis_set_param_vendor (u8 configNr, u32 vendorID,
const char *vendorDescr);
int rndis_set_param_medium (u8 configNr, u32 medium, u32 speed);
void rndis_add_hdr (struct sk_buff *skb);
-int rndis_rm_hdr (struct sk_buff *skb);
+int rndis_rm_hdr(struct gether *port, struct sk_buff *skb,
+ struct sk_buff_head *list);
u8 *rndis_get_next_response (int configNr, u32 *length);
void rndis_free_response (int configNr, u8 *buf);
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index 50c71aae2cc..4b5dbd0127f 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -2392,7 +2392,7 @@ static int s3c_hsotg_corereset(struct s3c_hsotg *hsotg)
grstctl = readl(hsotg->regs + S3C_GRSTCTL);
} while (!(grstctl & S3C_GRSTCTL_CSftRst) && timeout-- > 0);
- if (!grstctl & S3C_GRSTCTL_CSftRst) {
+ if (!(grstctl & S3C_GRSTCTL_CSftRst)) {
dev_err(hsotg->dev, "Failed to get CSftRst asserted\n");
return -EINVAL;
}
@@ -2514,8 +2514,8 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver)
* DMA mode we may need this. */
writel(S3C_DOEPMSK_SetupMsk | S3C_DOEPMSK_AHBErrMsk |
S3C_DOEPMSK_EPDisbldMsk |
- using_dma(hsotg) ? (S3C_DIEPMSK_XferComplMsk |
- S3C_DIEPMSK_TimeOUTMsk) : 0,
+ (using_dma(hsotg) ? (S3C_DIEPMSK_XferComplMsk |
+ S3C_DIEPMSK_TimeOUTMsk) : 0),
hsotg->regs + S3C_DOEPMSK);
writel(0, hsotg->regs + S3C_DAINTMSK);
diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c
index a9b452fe622..d5f4c1d45c9 100644
--- a/drivers/usb/gadget/s3c2410_udc.c
+++ b/drivers/usb/gadget/s3c2410_udc.c
@@ -1703,8 +1703,7 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
dprintk(DEBUG_NORMAL,"usb_gadget_register_driver() '%s'\n",
driver->driver.name);
- if (driver->disconnect)
- driver->disconnect(&udc->gadget);
+ driver->unbind(&udc->gadget);
device_del(&udc->gadget.dev);
udc->driver = NULL;
diff --git a/drivers/usb/gadget/u_audio.c b/drivers/usb/gadget/u_audio.c
index 0f3d22fc030..b5200d55145 100644
--- a/drivers/usb/gadget/u_audio.c
+++ b/drivers/usb/gadget/u_audio.c
@@ -253,11 +253,13 @@ static int gaudio_open_snd_dev(struct gaudio *card)
snd->filp = filp_open(fn_cap, O_RDONLY, 0);
if (IS_ERR(snd->filp)) {
ERROR(card, "No such PCM capture device: %s\n", fn_cap);
- snd->filp = NULL;
+ snd->substream = NULL;
+ snd->card = NULL;
+ } else {
+ pcm_file = snd->filp->private_data;
+ snd->substream = pcm_file->substream;
+ snd->card = card;
}
- pcm_file = snd->filp->private_data;
- snd->substream = pcm_file->substream;
- snd->card = card;
return 0;
}
diff --git a/drivers/usb/gadget/u_ether.c b/drivers/usb/gadget/u_ether.c
index c6652195391..f8751ff863c 100644
--- a/drivers/usb/gadget/u_ether.c
+++ b/drivers/usb/gadget/u_ether.c
@@ -37,8 +37,9 @@
* one (!) network link through the USB gadget stack, normally "usb0".
*
* The control and data models are handled by the function driver which
- * connects to this code; such as CDC Ethernet, "CDC Subset", or RNDIS.
- * That includes all descriptor and endpoint management.
+ * connects to this code; such as CDC Ethernet (ECM or EEM),
+ * "CDC Subset", or RNDIS. That includes all descriptor and endpoint
+ * management.
*
* Link level addressing is handled by this component using module
* parameters; if no such parameters are provided, random link level
@@ -68,9 +69,13 @@ struct eth_dev {
struct list_head tx_reqs, rx_reqs;
atomic_t tx_qlen;
+ struct sk_buff_head rx_frames;
+
unsigned header_len;
- struct sk_buff *(*wrap)(struct sk_buff *skb);
- int (*unwrap)(struct sk_buff *skb);
+ struct sk_buff *(*wrap)(struct gether *, struct sk_buff *skb);
+ int (*unwrap)(struct gether *,
+ struct sk_buff *skb,
+ struct sk_buff_head *list);
struct work_struct work;
@@ -269,7 +274,7 @@ enomem:
static void rx_complete(struct usb_ep *ep, struct usb_request *req)
{
- struct sk_buff *skb = req->context;
+ struct sk_buff *skb = req->context, *skb2;
struct eth_dev *dev = ep->driver_data;
int status = req->status;
@@ -278,26 +283,47 @@ static void rx_complete(struct usb_ep *ep, struct usb_request *req)
/* normal completion */
case 0:
skb_put(skb, req->actual);
- if (dev->unwrap)
- status = dev->unwrap(skb);
- if (status < 0
- || ETH_HLEN > skb->len
- || skb->len > ETH_FRAME_LEN) {
- dev->net->stats.rx_errors++;
- dev->net->stats.rx_length_errors++;
- DBG(dev, "rx length %d\n", skb->len);
- break;
- }
- skb->protocol = eth_type_trans(skb, dev->net);
- dev->net->stats.rx_packets++;
- dev->net->stats.rx_bytes += skb->len;
+ if (dev->unwrap) {
+ unsigned long flags;
- /* no buffer copies needed, unless hardware can't
- * use skb buffers.
- */
- status = netif_rx(skb);
+ spin_lock_irqsave(&dev->lock, flags);
+ if (dev->port_usb) {
+ status = dev->unwrap(dev->port_usb,
+ skb,
+ &dev->rx_frames);
+ } else {
+ dev_kfree_skb_any(skb);
+ status = -ENOTCONN;
+ }
+ spin_unlock_irqrestore(&dev->lock, flags);
+ } else {
+ skb_queue_tail(&dev->rx_frames, skb);
+ }
skb = NULL;
+
+ skb2 = skb_dequeue(&dev->rx_frames);
+ while (skb2) {
+ if (status < 0
+ || ETH_HLEN > skb2->len
+ || skb2->len > ETH_FRAME_LEN) {
+ dev->net->stats.rx_errors++;
+ dev->net->stats.rx_length_errors++;
+ DBG(dev, "rx length %d\n", skb2->len);
+ dev_kfree_skb_any(skb2);
+ goto next_frame;
+ }
+ skb2->protocol = eth_type_trans(skb2, dev->net);
+ dev->net->stats.rx_packets++;
+ dev->net->stats.rx_bytes += skb2->len;
+
+ /* no buffer copies needed, unless hardware can't
+ * use skb buffers.
+ */
+ status = netif_rx(skb2);
+next_frame:
+ skb2 = skb_dequeue(&dev->rx_frames);
+ }
break;
/* software-driven interface shutdown */
@@ -537,14 +563,15 @@ static netdev_tx_t eth_start_xmit(struct sk_buff *skb,
* or there's not enough space for extra headers we need
*/
if (dev->wrap) {
- struct sk_buff *skb_new;
+ unsigned long flags;
- skb_new = dev->wrap(skb);
- if (!skb_new)
+ spin_lock_irqsave(&dev->lock, flags);
+ if (dev->port_usb)
+ skb = dev->wrap(dev->port_usb, skb);
+ spin_unlock_irqrestore(&dev->lock, flags);
+ if (!skb)
goto drop;
- dev_kfree_skb_any(skb);
- skb = skb_new;
length = skb->len;
}
req->buf = skb->data;
@@ -578,9 +605,9 @@ static netdev_tx_t eth_start_xmit(struct sk_buff *skb,
}
if (retval) {
+ dev_kfree_skb_any(skb);
drop:
dev->net->stats.tx_dropped++;
- dev_kfree_skb_any(skb);
spin_lock_irqsave(&dev->req_lock, flags);
if (list_empty(&dev->tx_reqs))
netif_start_queue(net);
@@ -753,6 +780,8 @@ int __init gether_setup(struct usb_gadget *g, u8 ethaddr[ETH_ALEN])
INIT_LIST_HEAD(&dev->tx_reqs);
INIT_LIST_HEAD(&dev->rx_reqs);
+ skb_queue_head_init(&dev->rx_frames);
+
/* network device setup */
dev->net = net;
strcpy(net->name, "usb%d");
diff --git a/drivers/usb/gadget/u_ether.h b/drivers/usb/gadget/u_ether.h
index 0d1f7ae3b07..91b39ffdf6e 100644
--- a/drivers/usb/gadget/u_ether.h
+++ b/drivers/usb/gadget/u_ether.h
@@ -60,12 +60,13 @@ struct gether {
u16 cdc_filter;
- /* hooks for added framing, as needed for RNDIS and EEM.
- * we currently don't support multiple frames per SKB.
- */
+ /* hooks for added framing, as needed for RNDIS and EEM. */
u32 header_len;
- struct sk_buff *(*wrap)(struct sk_buff *skb);
- int (*unwrap)(struct sk_buff *skb);
+ struct sk_buff *(*wrap)(struct gether *port,
+ struct sk_buff *skb);
+ int (*unwrap)(struct gether *port,
+ struct sk_buff *skb,
+ struct sk_buff_head *list);
/* called on network open/close */
void (*open)(struct gether *);
@@ -109,6 +110,7 @@ static inline bool can_support_ecm(struct usb_gadget *gadget)
/* each configuration may bind one instance of an ethernet link */
int geth_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN]);
int ecm_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN]);
+int eem_bind_config(struct usb_configuration *c);
#ifdef CONFIG_USB_ETH_RNDIS
diff --git a/drivers/usb/gadget/u_serial.c b/drivers/usb/gadget/u_serial.c
index fc6e709f45b..adf8260c3a6 100644
--- a/drivers/usb/gadget/u_serial.c
+++ b/drivers/usb/gadget/u_serial.c
@@ -1114,7 +1114,6 @@ int __init gserial_setup(struct usb_gadget *g, unsigned count)
/* export the driver ... */
status = tty_register_driver(gs_tty_driver);
if (status) {
- put_tty_driver(gs_tty_driver);
pr_err("%s: cannot register, err %d\n",
__func__, status);
goto fail;