diff options
Diffstat (limited to 'drivers/usb/gadget')
27 files changed, 3340 insertions, 742 deletions
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 271ca161d7e..51ab5fd5d46 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -321,6 +321,15 @@ config USB_MV_UDC USB2.0 OTG controller, which can be configured as high speed or full speed USB peripheral. +config USB_MV_U3D + tristate "MARVELL PXA2128 USB 3.0 controller" + depends on CPU_MMP3 + select USB_GADGET_DUALSPEED + select USB_GADGET_SUPERSPEED + help + MARVELL PXA2128 Processor series include a super speed USB3.0 device + controller, which support super speed USB peripheral. + # # Controllers available in both integrated and discrete versions # diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile index 1811513f1c2..3fd8cd09d2c 100644 --- a/drivers/usb/gadget/Makefile +++ b/drivers/usb/gadget/Makefile @@ -29,6 +29,7 @@ obj-$(CONFIG_USB_EG20T) += pch_udc.o obj-$(CONFIG_USB_MV_UDC) += mv_udc.o mv_udc-y := mv_udc_core.o obj-$(CONFIG_USB_FUSB300) += fusb300_udc.o +obj-$(CONFIG_USB_MV_U3D) += mv_u3d_core.o # # USB gadget drivers diff --git a/drivers/usb/gadget/acm_ms.c b/drivers/usb/gadget/acm_ms.c index fdb7aec3bd0..75b8a691fd0 100644 --- a/drivers/usb/gadget/acm_ms.c +++ b/drivers/usb/gadget/acm_ms.c @@ -235,6 +235,7 @@ static int __exit acm_ms_unbind(struct usb_composite_dev *cdev) static struct usb_composite_driver acm_ms_driver = { .name = "g_acm_ms", .dev = &device_desc, + .max_speed = USB_SPEED_SUPER, .strings = dev_strings, .unbind = __exit_p(acm_ms_unbind), }; diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c index 1a4430f315c..c9e66dfb02e 100644 --- a/drivers/usb/gadget/at91_udc.c +++ b/drivers/usb/gadget/at91_udc.c @@ -1634,6 +1634,7 @@ static int at91_start(struct usb_gadget *gadget, udc = container_of(gadget, struct at91_udc, gadget); udc->driver = driver; udc->gadget.dev.driver = &driver->driver; + udc->gadget.dev.of_node = udc->pdev->dev.of_node; dev_set_drvdata(&udc->gadget.dev, &driver->driver); udc->enabled = 1; udc->selfpowered = 1; diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index 390749bbb0c..3f72110da1b 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -117,6 +117,7 @@ int config_ep_by_speed(struct usb_gadget *g, struct usb_function *f, struct usb_ep *_ep) { + struct usb_composite_dev *cdev = get_gadget_data(g); struct usb_endpoint_descriptor *chosen_desc = NULL; struct usb_descriptor_header **speed_desc = NULL; @@ -180,10 +181,12 @@ ep_found: _ep->mult = comp_desc->bmAttributes & 0x3; case USB_ENDPOINT_XFER_BULK: case USB_ENDPOINT_XFER_INT: - _ep->maxburst = comp_desc->bMaxBurst; + _ep->maxburst = comp_desc->bMaxBurst + 1; break; default: - /* Do nothing for control endpoints */ + if (comp_desc->bMaxBurst != 0) + ERROR(cdev, "ep0 bMaxBurst must be 0\n"); + _ep->maxburst = 1; break; } } diff --git a/drivers/usb/gadget/f_fs.c b/drivers/usb/gadget/f_fs.c index dcd1c7fbb01..8adc79d1b40 100644 --- a/drivers/usb/gadget/f_fs.c +++ b/drivers/usb/gadget/f_fs.c @@ -21,6 +21,7 @@ #include <linux/blkdev.h> #include <linux/pagemap.h> #include <linux/export.h> +#include <linux/hid.h> #include <asm/unaligned.h> #include <linux/usb/composite.h> @@ -1671,6 +1672,12 @@ static int __must_check ffs_do_desc(char *data, unsigned len, } break; + case HID_DT_HID: + pr_vdebug("hid descriptor\n"); + if (length != sizeof(struct hid_descriptor)) + goto inv_length; + break; + case USB_DT_OTG: if (length != sizeof(struct usb_otg_descriptor)) goto inv_length; diff --git a/drivers/usb/gadget/f_hid.c b/drivers/usb/gadget/f_hid.c index 3b3932c5536..16a8b1c15c6 100644 --- a/drivers/usb/gadget/f_hid.c +++ b/drivers/usb/gadget/f_hid.c @@ -26,6 +26,12 @@ static struct class *hidg_class; /*-------------------------------------------------------------------------*/ /* HID gadget struct */ +struct f_hidg_req_list { + struct usb_request *req; + unsigned int pos; + struct list_head list; +}; + struct f_hidg { /* configuration */ unsigned char bInterfaceSubClass; @@ -35,10 +41,10 @@ struct f_hidg { unsigned short report_length; /* recv report */ - char *set_report_buff; - unsigned short set_report_length; + struct list_head completed_out_req; spinlock_t spinlock; wait_queue_head_t read_queue; + unsigned int qlen; /* send report */ struct mutex lock; @@ -49,7 +55,9 @@ struct f_hidg { int minor; struct cdev cdev; struct usb_function func; + struct usb_ep *in_ep; + struct usb_ep *out_ep; }; static inline struct f_hidg *func_to_hidg(struct usb_function *f) @@ -65,7 +73,7 @@ static struct usb_interface_descriptor hidg_interface_desc = { .bDescriptorType = USB_DT_INTERFACE, /* .bInterfaceNumber = DYNAMIC */ .bAlternateSetting = 0, - .bNumEndpoints = 1, + .bNumEndpoints = 2, .bInterfaceClass = USB_CLASS_HID, /* .bInterfaceSubClass = DYNAMIC */ /* .bInterfaceProtocol = DYNAMIC */ @@ -96,10 +104,23 @@ static struct usb_endpoint_descriptor hidg_hs_in_ep_desc = { */ }; +static struct usb_endpoint_descriptor hidg_hs_out_ep_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bEndpointAddress = USB_DIR_OUT, + .bmAttributes = USB_ENDPOINT_XFER_INT, + /*.wMaxPacketSize = DYNAMIC */ + .bInterval = 4, /* FIXME: Add this field in the + * HID gadget configuration? + * (struct hidg_func_descriptor) + */ +}; + static struct usb_descriptor_header *hidg_hs_descriptors[] = { (struct usb_descriptor_header *)&hidg_interface_desc, (struct usb_descriptor_header *)&hidg_desc, (struct usb_descriptor_header *)&hidg_hs_in_ep_desc, + (struct usb_descriptor_header *)&hidg_hs_out_ep_desc, NULL, }; @@ -117,10 +138,23 @@ static struct usb_endpoint_descriptor hidg_fs_in_ep_desc = { */ }; +static struct usb_endpoint_descriptor hidg_fs_out_ep_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bEndpointAddress = USB_DIR_OUT, + .bmAttributes = USB_ENDPOINT_XFER_INT, + /*.wMaxPacketSize = DYNAMIC */ + .bInterval = 10, /* FIXME: Add this field in the + * HID gadget configuration? + * (struct hidg_func_descriptor) + */ +}; + static struct usb_descriptor_header *hidg_fs_descriptors[] = { (struct usb_descriptor_header *)&hidg_interface_desc, (struct usb_descriptor_header *)&hidg_desc, (struct usb_descriptor_header *)&hidg_fs_in_ep_desc, + (struct usb_descriptor_header *)&hidg_fs_out_ep_desc, NULL, }; @@ -130,9 +164,11 @@ static struct usb_descriptor_header *hidg_fs_descriptors[] = { static ssize_t f_hidg_read(struct file *file, char __user *buffer, size_t count, loff_t *ptr) { - struct f_hidg *hidg = file->private_data; - char *tmp_buff = NULL; - unsigned long flags; + struct f_hidg *hidg = file->private_data; + struct f_hidg_req_list *list; + struct usb_request *req; + unsigned long flags; + int ret; if (!count) return 0; @@ -142,8 +178,9 @@ static ssize_t f_hidg_read(struct file *file, char __user *buffer, spin_lock_irqsave(&hidg->spinlock, flags); -#define READ_COND (hidg->set_report_buff != NULL) +#define READ_COND (!list_empty(&hidg->completed_out_req)) + /* wait for at least one buffer to complete */ while (!READ_COND) { spin_unlock_irqrestore(&hidg->spinlock, flags); if (file->f_flags & O_NONBLOCK) @@ -155,19 +192,34 @@ static ssize_t f_hidg_read(struct file *file, char __user *buffer, spin_lock_irqsave(&hidg->spinlock, flags); } - - count = min_t(unsigned, count, hidg->set_report_length); - tmp_buff = hidg->set_report_buff; - hidg->set_report_buff = NULL; - + /* pick the first one */ + list = list_first_entry(&hidg->completed_out_req, + struct f_hidg_req_list, list); + req = list->req; + count = min_t(unsigned int, count, req->actual - list->pos); spin_unlock_irqrestore(&hidg->spinlock, flags); - if (tmp_buff != NULL) { - /* copy to user outside spinlock */ - count -= copy_to_user(buffer, tmp_buff, count); - kfree(tmp_buff); - } else - count = -ENOMEM; + /* copy to user outside spinlock */ + count -= copy_to_user(buffer, req->buf + list->pos, count); + list->pos += count; + + /* + * if this request is completely handled and transfered to + * userspace, remove its entry from the list and requeue it + * again. Otherwise, we will revisit it again upon the next + * call, taking into account its current read position. + */ + if (list->pos == req->actual) { + spin_lock_irqsave(&hidg->spinlock, flags); + list_del(&list->list); + kfree(list); + spin_unlock_irqrestore(&hidg->spinlock, flags); + + req->length = hidg->report_length; + ret = usb_ep_queue(hidg->out_ep, req, GFP_KERNEL); + if (ret < 0) + return ret; + } return count; } @@ -282,28 +334,37 @@ static int f_hidg_open(struct inode *inode, struct file *fd) /*-------------------------------------------------------------------------*/ /* usb_function */ -static void hidg_set_report_complete(struct usb_ep *ep, struct usb_request *req) +static struct usb_request *hidg_alloc_ep_req(struct usb_ep *ep, unsigned length) { - struct f_hidg *hidg = (struct f_hidg *)req->context; - - if (req->status != 0 || req->buf == NULL || req->actual == 0) { - ERROR(hidg->func.config->cdev, "%s FAILED\n", __func__); - return; + struct usb_request *req; + + req = usb_ep_alloc_request(ep, GFP_ATOMIC); + if (req) { + req->length = length; + req->buf = kmalloc(length, GFP_ATOMIC); + if (!req->buf) { + usb_ep_free_request(ep, req); + req = NULL; + } } + return req; +} - spin_lock(&hidg->spinlock); - - hidg->set_report_buff = krealloc(hidg->set_report_buff, - req->actual, GFP_ATOMIC); +static void hidg_set_report_complete(struct usb_ep *ep, struct usb_request *req) +{ + struct f_hidg *hidg = (struct f_hidg *) req->context; + struct f_hidg_req_list *req_list; + unsigned long flags; - if (hidg->set_report_buff == NULL) { - spin_unlock(&hidg->spinlock); + req_list = kzalloc(sizeof(*req_list), GFP_ATOMIC); + if (!req_list) return; - } - hidg->set_report_length = req->actual; - memcpy(hidg->set_report_buff, req->buf, req->actual); - spin_unlock(&hidg->spinlock); + req_list->req = req; + + spin_lock_irqsave(&hidg->spinlock, flags); + list_add_tail(&req_list->list, &hidg->completed_out_req); + spin_unlock_irqrestore(&hidg->spinlock, flags); wake_up(&hidg->read_queue); } @@ -344,9 +405,7 @@ static int hidg_setup(struct usb_function *f, case ((USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8 | HID_REQ_SET_REPORT): VDBG(cdev, "set_report | wLenght=%d\n", ctrl->wLength); - req->context = hidg; - req->complete = hidg_set_report_complete; - goto respond; + goto stall; break; case ((USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8 @@ -403,16 +462,25 @@ respond: static void hidg_disable(struct usb_function *f) { struct f_hidg *hidg = func_to_hidg(f); + struct f_hidg_req_list *list, *next; usb_ep_disable(hidg->in_ep); hidg->in_ep->driver_data = NULL; + + usb_ep_disable(hidg->out_ep); + hidg->out_ep->driver_data = NULL; + + list_for_each_entry_safe(list, next, &hidg->completed_out_req, list) { + list_del(&list->list); + kfree(list); + } } static int hidg_set_alt(struct usb_function *f, unsigned intf, unsigned alt) { struct usb_composite_dev *cdev = f->config->cdev; struct f_hidg *hidg = func_to_hidg(f); - int status = 0; + int i, status = 0; VDBG(cdev, "hidg_set_alt intf:%d alt:%d\n", intf, alt); @@ -429,11 +497,55 @@ static int hidg_set_alt(struct usb_function *f, unsigned intf, unsigned alt) } status = usb_ep_enable(hidg->in_ep); if (status < 0) { - ERROR(cdev, "Enable endpoint FAILED!\n"); + ERROR(cdev, "Enable IN endpoint FAILED!\n"); goto fail; } hidg->in_ep->driver_data = hidg; } + + + if (hidg->out_ep != NULL) { + /* restart endpoint */ + if (hidg->out_ep->driver_data != NULL) + usb_ep_disable(hidg->out_ep); + + status = config_ep_by_speed(f->config->cdev->gadget, f, + hidg->out_ep); + if (status) { + ERROR(cdev, "config_ep_by_speed FAILED!\n"); + goto fail; + } + status = usb_ep_enable(hidg->out_ep); + if (status < 0) { + ERROR(cdev, "Enable IN endpoint FAILED!\n"); + goto fail; + } + hidg->out_ep->driver_data = hidg; + + /* + * allocate a bunch of read buffers and queue them all at once. + */ + for (i = 0; i < hidg->qlen && status == 0; i++) { + struct usb_request *req = + hidg_alloc_ep_req(hidg->out_ep, + hidg->report_length); + if (req) { + req->complete = hidg_set_report_complete; + req->context = hidg; + status = usb_ep_queue(hidg->out_ep, req, + GFP_ATOMIC); + if (status) + ERROR(cdev, "%s queue req --> %d\n", + hidg->out_ep->name, status); + } else { + usb_ep_disable(hidg->out_ep); + hidg->out_ep->driver_data = NULL; + status = -ENOMEM; + goto fail; + } + } + } + fail: return status; } @@ -470,13 +582,18 @@ static int __init hidg_bind(struct usb_configuration *c, struct usb_function *f) ep->driver_data = c->cdev; /* claim */ hidg->in_ep = ep; + ep = usb_ep_autoconfig(c->cdev->gadget, &hidg_fs_out_ep_desc); + if (!ep) + goto fail; + ep->driver_data = c->cdev; /* claim */ + hidg->out_ep = ep; + /* preallocate request and buffer */ status = -ENOMEM; hidg->req = usb_ep_alloc_request(hidg->in_ep, GFP_KERNEL); if (!hidg->req) goto fail; - hidg->req->buf = kmalloc(hidg->report_length, GFP_KERNEL); if (!hidg->req->buf) goto fail; @@ -486,12 +603,12 @@ static int __init hidg_bind(struct usb_configuration *c, struct usb_function *f) hidg_interface_desc.bInterfaceProtocol = hidg->bInterfaceProtocol; hidg_hs_in_ep_desc.wMaxPacketSize = cpu_to_le16(hidg->report_length); hidg_fs_in_ep_desc.wMaxPacketSize = cpu_to_le16(hidg->report_length); + hidg_hs_out_ep_desc.wMaxPacketSize = cpu_to_le16(hidg->report_length); + hidg_fs_out_ep_desc.wMaxPacketSize = cpu_to_le16(hidg->report_length); hidg_desc.desc[0].bDescriptorType = HID_DT_REPORT; hidg_desc.desc[0].wDescriptorLength = cpu_to_le16(hidg->report_desc_length); - hidg->set_report_buff = NULL; - /* copy descriptors */ f->descriptors = usb_copy_descriptors(hidg_fs_descriptors); if (!f->descriptors) @@ -500,6 +617,8 @@ static int __init hidg_bind(struct usb_configuration *c, struct usb_function *f) if (gadget_is_dualspeed(c->cdev->gadget)) { hidg_hs_in_ep_desc.bEndpointAddress = hidg_fs_in_ep_desc.bEndpointAddress; + hidg_hs_out_ep_desc.bEndpointAddress = + hidg_fs_out_ep_desc.bEndpointAddress; f->hs_descriptors = usb_copy_descriptors(hidg_hs_descriptors); if (!f->hs_descriptors) goto fail; @@ -509,6 +628,7 @@ static int __init hidg_bind(struct usb_configuration *c, struct usb_function *f) spin_lock_init(&hidg->spinlock); init_waitqueue_head(&hidg->write_queue); init_waitqueue_head(&hidg->read_queue); + INIT_LIST_HEAD(&hidg->completed_out_req); /* create char device */ cdev_init(&hidg->cdev, &f_hidg_fops); @@ -553,7 +673,6 @@ static void hidg_unbind(struct usb_configuration *c, struct usb_function *f) usb_free_descriptors(f->descriptors); kfree(hidg->report_desc); - kfree(hidg->set_report_buff); kfree(hidg); } @@ -624,6 +743,9 @@ int __init hidg_bind_config(struct usb_configuration *c, hidg->func.disable = hidg_disable; hidg->func.setup = hidg_setup; + /* this could me made configurable at some point */ + hidg->qlen = 4; + status = usb_add_function(c, &hidg->func); if (status) kfree(hidg); diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c index f67b453740b..4f1142efa6d 100644 --- a/drivers/usb/gadget/f_mass_storage.c +++ b/drivers/usb/gadget/f_mass_storage.c @@ -44,12 +44,12 @@ * function for a USB device, it also illustrates a technique of * double-buffering for increased throughput. * - * Function supports multiple logical units (LUNs). Backing storage - * for each LUN is provided by a regular file or a block device. - * Access for each LUN can be limited to read-only. Moreover, the - * function can indicate that LUN is removable and/or CD-ROM. (The - * later implies read-only access.) - * + * For more information about MSF and in particular its module + * parameters and sysfs interface read the + * <Documentation/usb/mass-storage.txt> file. + */ + +/* * MSF is configured by specifying a fsg_config structure. It has the * following fields: * @@ -75,25 +75,6 @@ * ->nofua Flag specifying that FUA flag in SCSI WRITE(10,12) * commands for this LUN shall be ignored. * - * lun_name_format A printf-like format for names of the LUN - * devices. This determines how the - * directory in sysfs will be named. - * Unless you are using several MSFs in - * a single gadget (as opposed to single - * MSF in many configurations) you may - * leave it as NULL (in which case - * "lun%d" will be used). In the format - * you can use "%d" to index LUNs for - * MSF's with more than one LUN. (Beware - * that there is only one integer given - * as an argument for the format and - * specifying invalid format may cause - * unspecified behaviour.) - * thread_name Name of the kernel thread process used by the - * MSF. You can safely set it to NULL - * (in which case default "file-storage" - * will be used). - * * vendor_name * product_name * release Information used as a reply to INQUIRY @@ -114,62 +95,6 @@ * data track and no audio tracks; hence there need be only one * backing file per LUN. * - * - * MSF includes support for module parameters. If gadget using it - * decides to use it, the following module parameters will be - * available: - * - * file=filename[,filename...] - * Names of the files or block devices used for - * backing storage. - * ro=b[,b...] Default false, boolean for read-only access. - * removable=b[,b...] - * Default true, boolean for removable media. - * cdrom=b[,b...] Default false, boolean for whether to emulate - * a CD-ROM drive. - * nofua=b[,b...] Default false, booleans for ignore FUA flag - * in SCSI WRITE(10,12) commands - * luns=N Default N = number of filenames, number of - * LUNs to support. - * stall Default determined according to the type of - * USB device controller (usually true), - * boolean to permit the driver to halt - * bulk endpoints. - * - * The module parameters may be prefixed with some string. You need - * to consult gadget's documentation or source to verify whether it is - * using those module parameters and if it does what are the prefixes - * (look for FSG_MODULE_PARAMETERS() macro usage, what's inside it is - * the prefix). - * - * - * Requirements are modest; only a bulk-in and a bulk-out endpoint are - * needed. The memory requirement amounts to two 16K buffers, size - * configurable by a parameter. Support is included for both - * full-speed and high-speed operation. - * - * Note that the driver is slightly non-portable in that it assumes a - * single memory/DMA buffer will be useable for bulk-in, bulk-out, and - * interrupt-in endpoints. With most device controllers this isn't an - * issue, but there may be some with hardware restrictions that prevent - * a buffer from being used by more than one endpoint. - * - * - * The pathnames of the backing files and the ro settings are - * available in the attribute files "file" and "ro" in the lun<n> (or - * to be more precise in a directory which name comes from - * "lun_name_format" option!) subdirectory of the gadget's sysfs - * directory. If the "removable" option is set, writing to these - * files will simulate ejecting/loading the medium (writing an empty - * line means eject) and adjusting a write-enable tab. Changes to the - * ro setting are not allowed when the medium is loaded or if CD-ROM - * emulation is being used. - * - * When a LUN receive an "eject" SCSI request (Start/Stop Unit), - * if the LUN is removable, the backing file is released to simulate - * ejection. - * - * * This function is heavily based on "File-backed Storage Gadget" by * Alan Stern which in turn is heavily based on "Gadget Zero" by David * Brownell. The driver's SCSI command interface was based on the @@ -211,7 +136,7 @@ * In normal operation the main thread is started during the gadget's * fsg_bind() callback and stopped during fsg_unbind(). But it can * also exit when it receives a signal, and there's no point leaving - * the gadget running when the thread is dead. At of this moment, MSF + * the gadget running when the thread is dead. As of this moment, MSF * provides no way to deregister the gadget when thread dies -- maybe * a callback functions is needed. * @@ -417,9 +342,6 @@ struct fsg_config { char nofua; } luns[FSG_MAX_LUNS]; - const char *lun_name_format; - const char *thread_name; - /* Callback functions. */ const struct fsg_operations *ops; /* Gadget's private data. */ @@ -2687,11 +2609,15 @@ static int fsg_main_thread(void *common_) /*************************** DEVICE ATTRIBUTES ***************************/ -/* Write permission is checked per LUN in store_*() functions. */ static DEVICE_ATTR(ro, 0644, fsg_show_ro, fsg_store_ro); static DEVICE_ATTR(nofua, 0644, fsg_show_nofua, fsg_store_nofua); static DEVICE_ATTR(file, 0644, fsg_show_file, fsg_store_file); +static struct device_attribute dev_attr_ro_cdrom = + __ATTR(ro, 0444, fsg_show_ro, NULL); +static struct device_attribute dev_attr_file_nonremovable = + __ATTR(file, 0444, fsg_show_file, NULL); + /****************************** FSG COMMON ******************************/ @@ -2792,11 +2718,7 @@ static struct fsg_common *fsg_common_init(struct fsg_common *common, curlun->dev.parent = &gadget->dev; /* curlun->dev.driver = &fsg_driver.driver; XXX */ dev_set_drvdata(&curlun->dev, &common->filesem); - dev_set_name(&curlun->dev, - cfg->lun_name_format - ? cfg->lun_name_format - : "lun%d", - i); + dev_set_name(&curlun->dev, "lun%d", i); rc = device_register(&curlun->dev); if (rc) { @@ -2806,10 +2728,16 @@ static struct fsg_common *fsg_common_init(struct fsg_common *common, goto error_release; } - rc = device_create_file(&curlun->dev, &dev_attr_ro); + rc = device_create_file(&curlun->dev, + curlun->cdrom + ? &dev_attr_ro_cdrom + : &dev_attr_ro); if (rc) goto error_luns; - rc = device_create_file(&curlun->dev, &dev_attr_file); + rc = device_create_file(&curlun->dev, + curlun->removable + ? &dev_attr_file + : &dev_attr_file_nonremovable); if (rc) goto error_luns; rc = device_create_file(&curlun->dev, &dev_attr_nofua); @@ -2878,8 +2806,7 @@ buffhds_first_it: /* Tell the thread to start working */ common->thread_task = - kthread_create(fsg_main_thread, common, - cfg->thread_name ?: "file-storage"); + kthread_create(fsg_main_thread, common, "file-storage"); if (IS_ERR(common->thread_task)) { rc = PTR_ERR(common->thread_task); goto error_release; @@ -2945,8 +2872,14 @@ static void fsg_common_release(struct kref *ref) /* In error recovery common->nluns may be zero. */ for (; i; --i, ++lun) { device_remove_file(&lun->dev, &dev_attr_nofua); - device_remove_file(&lun->dev, &dev_attr_ro); - device_remove_file(&lun->dev, &dev_attr_file); + device_remove_file(&lun->dev, + lun->cdrom + ? &dev_attr_ro_cdrom + : &dev_attr_ro); + device_remove_file(&lun->dev, + lun->removable + ? &dev_attr_file + : &dev_attr_file_nonremovable); fsg_lun_close(lun); device_unregister(&lun->dev); } @@ -3167,8 +3100,7 @@ fsg_config_from_params(struct fsg_config *cfg, for (i = 0, lun = cfg->luns; i < cfg->nluns; ++i, ++lun) { lun->ro = !!params->ro[i]; lun->cdrom = !!params->cdrom[i]; - lun->removable = /* Removable by default */ - params->removable_count <= i || params->removable[i]; + lun->removable = !!params->removable[i]; lun->filename = params->file_count > i && params->file[i][0] ? params->file[i] @@ -3176,8 +3108,6 @@ fsg_config_from_params(struct fsg_config *cfg, } /* Let MSF use defaults */ - cfg->lun_name_format = 0; - cfg->thread_name = 0; cfg->vendor_name = 0; cfg->product_name = 0; cfg->release = 0xffff; @@ -3203,4 +3133,3 @@ fsg_common_from_params(struct fsg_common *common, fsg_config_from_params(&cfg, params); return fsg_common_init(common, cdev, &cfg); } - diff --git a/drivers/usb/gadget/f_uvc.c b/drivers/usb/gadget/f_uvc.c index 2022fe49214..2a8bf0655c6 100644 --- a/drivers/usb/gadget/f_uvc.c +++ b/drivers/usb/gadget/f_uvc.c @@ -29,6 +29,25 @@ unsigned int uvc_gadget_trace_param; +/*-------------------------------------------------------------------------*/ + +/* module parameters specific to the Video streaming endpoint */ +static unsigned streaming_interval = 1; +module_param(streaming_interval, uint, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(streaming_interval, "1 - 16"); + +static unsigned streaming_maxpacket = 1024; +module_param(streaming_maxpacket, uint, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(streaming_maxpacket, "0 - 1023 (fs), 0 - 1024 (hs/ss)"); + +static unsigned streaming_mult; +module_param(streaming_mult, uint, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(streaming_mult, "0 - 2 (hs/ss only)"); + +static unsigned streaming_maxburst; +module_param(streaming_maxburst, uint, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(streaming_maxburst, "0 - 15 (ss only)"); + /* -------------------------------------------------------------------------- * Function descriptors */ @@ -59,6 +78,8 @@ static struct usb_gadget_strings *uvc_function_strings[] = { #define UVC_INTF_VIDEO_CONTROL 0 #define UVC_INTF_VIDEO_STREAMING 1 +#define STATUS_BYTECOUNT 16 /* 16 bytes status */ + static struct usb_interface_assoc_descriptor uvc_iad __initdata = { .bLength = sizeof(uvc_iad), .bDescriptorType = USB_DT_INTERFACE_ASSOCIATION, @@ -82,12 +103,12 @@ static struct usb_interface_descriptor uvc_control_intf __initdata = { .iInterface = 0, }; -static struct usb_endpoint_descriptor uvc_control_ep __initdata = { +static struct usb_endpoint_descriptor uvc_fs_control_ep __initdata = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, .bEndpointAddress = USB_DIR_IN, .bmAttributes = USB_ENDPOINT_XFER_INT, - .wMaxPacketSize = cpu_to_le16(16), + .wMaxPacketSize = cpu_to_le16(STATUS_BYTECOUNT), .bInterval = 8, }; @@ -95,7 +116,7 @@ static struct uvc_control_endpoint_descriptor uvc_control_cs_ep __initdata = { .bLength = UVC_DT_CONTROL_ENDPOINT_SIZE, .bDescriptorType = USB_DT_CS_ENDPOINT, .bDescriptorSubType = UVC_EP_INTERRUPT, - .wMaxTransferSize = cpu_to_le16(16), + .wMaxTransferSize = cpu_to_le16(STATUS_BYTECOUNT), }; static struct usb_interface_descriptor uvc_streaming_intf_alt0 __initdata = { @@ -122,7 +143,7 @@ static struct usb_interface_descriptor uvc_streaming_intf_alt1 __initdata = { .iInterface = 0, }; -static struct usb_endpoint_descriptor uvc_streaming_ep = { +static struct usb_endpoint_descriptor uvc_fs_streaming_ep = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, .bEndpointAddress = USB_DIR_IN, @@ -131,15 +152,72 @@ static struct usb_endpoint_descriptor uvc_streaming_ep = { .bInterval = 1, }; +static struct usb_endpoint_descriptor uvc_hs_streaming_ep = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bEndpointAddress = USB_DIR_IN, + .bmAttributes = USB_ENDPOINT_XFER_ISOC, + .wMaxPacketSize = cpu_to_le16(1024), + .bInterval = 1, +}; + +/* super speed support */ +static struct usb_endpoint_descriptor uvc_ss_control_ep __initdata = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + .bEndpointAddress = USB_DIR_IN, + .bmAttributes = USB_ENDPOINT_XFER_INT, + .wMaxPacketSize = cpu_to_le16(STATUS_BYTECOUNT), + .bInterval = 8, +}; + +static struct usb_ss_ep_comp_descriptor uvc_ss_control_comp __initdata = { + .bLength = sizeof uvc_ss_control_comp, + .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, + + /* the following 3 values can be tweaked if necessary */ + /* .bMaxBurst = 0, */ + /* .bmAttributes = 0, */ + .wBytesPerInterval = cpu_to_le16(STATUS_BYTECOUNT), +}; + +static struct usb_endpoint_descriptor uvc_ss_streaming_ep __initdata = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + .bEndpointAddress = USB_DIR_IN, + .bmAttributes = USB_ENDPOINT_XFER_ISOC, + .wMaxPacketSize = cpu_to_le16(1024), + .bInterval = 4, +}; + +static struct usb_ss_ep_comp_descriptor uvc_ss_streaming_comp = { + .bLength = sizeof uvc_ss_streaming_comp, + .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, + + /* the following 3 values can be tweaked if necessary */ + .bMaxBurst = 0, + .bmAttributes = 0, + .wBytesPerInterval = cpu_to_le16(1024), +}; + static const struct usb_descriptor_header * const uvc_fs_streaming[] = { (struct usb_descriptor_header *) &uvc_streaming_intf_alt1, - (struct usb_descriptor_header *) &uvc_streaming_ep, + (struct usb_descriptor_header *) &uvc_fs_streaming_ep, NULL, }; static const struct usb_descriptor_header * const uvc_hs_streaming[] = { (struct usb_descriptor_header *) &uvc_streaming_intf_alt1, - (struct usb_descriptor_header *) &uvc_streaming_ep, + (struct usb_descriptor_header *) &uvc_hs_streaming_ep, + NULL, +}; + +static const struct usb_descriptor_header * const uvc_ss_streaming[] = { + (struct usb_descriptor_header *) &uvc_streaming_intf_alt1, + (struct usb_descriptor_header *) &uvc_ss_streaming_ep, + (struct usb_descriptor_header *) &uvc_ss_streaming_comp, NULL, }; @@ -215,6 +293,7 @@ uvc_function_set_alt(struct usb_function *f, unsigned interface, unsigned alt) struct uvc_device *uvc = to_uvc(f); struct v4l2_event v4l2_event; struct uvc_event *uvc_event = (void *)&v4l2_event.u.data; + int ret; INFO(f->config->cdev, "uvc_function_set_alt(%u, %u)\n", interface, alt); @@ -262,7 +341,10 @@ uvc_function_set_alt(struct usb_function *f, unsigned interface, unsigned alt) return 0; if (uvc->video.ep) { - uvc->video.ep->desc = &uvc_streaming_ep; + ret = config_ep_by_speed(f->config->cdev->gadget, + &(uvc->func), uvc->video.ep); + if (ret) + return ret; usb_ep_enable(uvc->video.ep); } @@ -368,9 +450,11 @@ uvc_copy_descriptors(struct uvc_device *uvc, enum usb_device_speed speed) { struct uvc_input_header_descriptor *uvc_streaming_header; struct uvc_header_descriptor *uvc_control_header; + const struct uvc_descriptor_header * const *uvc_control_desc; const struct uvc_descriptor_header * const *uvc_streaming_cls; const struct usb_descriptor_header * const *uvc_streaming_std; const struct usb_descriptor_header * const *src; + static struct usb_endpoint_descriptor *uvc_control_ep; struct usb_descriptor_header **dst; struct usb_descriptor_header **hdr; unsigned int control_size; @@ -379,10 +463,29 @@ uvc_copy_descriptors(struct uvc_device *uvc, enum usb_device_speed speed) unsigned int bytes; void *mem; - uvc_streaming_cls = (speed == USB_SPEED_FULL) - ? uvc->desc.fs_streaming : uvc->desc.hs_streaming; - uvc_streaming_std = (speed == USB_SPEED_FULL) - ? uvc_fs_streaming : uvc_hs_streaming; + switch (speed) { + case USB_SPEED_SUPER: + uvc_control_desc = uvc->desc.ss_control; + uvc_streaming_cls = uvc->desc.ss_streaming; + uvc_streaming_std = uvc_ss_streaming; + uvc_control_ep = &uvc_ss_control_ep; + break; + + case USB_SPEED_HIGH: + uvc_control_desc = uvc->desc.fs_control; + uvc_streaming_cls = uvc->desc.hs_streaming; + uvc_streaming_std = uvc_hs_streaming; + uvc_control_ep = &uvc_fs_control_ep; + break; + + case USB_SPEED_FULL: + default: + uvc_control_desc = uvc->desc.fs_control; + uvc_streaming_cls = uvc->desc.fs_streaming; + uvc_streaming_std = uvc_fs_streaming; + uvc_control_ep = &uvc_fs_control_ep; + break; + } /* Descriptors layout * @@ -400,16 +503,24 @@ uvc_copy_descriptors(struct uvc_device *uvc, enum usb_device_speed speed) control_size = 0; streaming_size = 0; bytes = uvc_iad.bLength + uvc_control_intf.bLength - + uvc_control_ep.bLength + uvc_control_cs_ep.bLength + + uvc_control_ep->bLength + uvc_control_cs_ep.bLength + uvc_streaming_intf_alt0.bLength; - n_desc = 5; - for (src = (const struct usb_descriptor_header**)uvc->desc.control; *src; ++src) { + if (speed == USB_SPEED_SUPER) { + bytes += uvc_ss_control_comp.bLength; + n_desc = 6; + } else { + n_desc = 5; + } + + for (src = (const struct usb_descriptor_header **)uvc_control_desc; + *src; ++src) { control_size += (*src)->bLength; bytes += (*src)->bLength; n_desc++; } - for (src = (const struct usb_descriptor_header**)uvc_streaming_cls; *src; ++src) { + for (src = (const struct usb_descriptor_header **)uvc_streaming_cls; + *src; ++src) { streaming_size += (*src)->bLength; bytes += (*src)->bLength; n_desc++; @@ -433,12 +544,15 @@ uvc_copy_descriptors(struct uvc_device *uvc, enum usb_device_speed speed) uvc_control_header = mem; UVC_COPY_DESCRIPTORS(mem, dst, - (const struct usb_descriptor_header**)uvc->desc.control); + (const struct usb_descriptor_header **)uvc_control_desc); uvc_control_header->wTotalLength = cpu_to_le16(control_size); uvc_control_header->bInCollection = 1; uvc_control_header->baInterfaceNr[0] = uvc->streaming_intf; - UVC_COPY_DESCRIPTOR(mem, dst, &uvc_control_ep); + UVC_COPY_DESCRIPTOR(mem, dst, uvc_control_ep); + if (speed == USB_SPEED_SUPER) + UVC_COPY_DESCRIPTOR(mem, dst, &uvc_ss_control_comp); + UVC_COPY_DESCRIPTOR(mem, dst, &uvc_control_cs_ep); UVC_COPY_DESCRIPTOR(mem, dst, &uvc_streaming_intf_alt0); @@ -446,7 +560,8 @@ uvc_copy_descriptors(struct uvc_device *uvc, enum usb_device_speed speed) UVC_COPY_DESCRIPTORS(mem, dst, (const struct usb_descriptor_header**)uvc_streaming_cls); uvc_streaming_header->wTotalLength = cpu_to_le16(streaming_size); - uvc_streaming_header->bEndpointAddress = uvc_streaming_ep.bEndpointAddress; + uvc_streaming_header->bEndpointAddress = + uvc_fs_streaming_ep.bEndpointAddress; UVC_COPY_DESCRIPTORS(mem, dst, uvc_streaming_std); @@ -482,6 +597,7 @@ uvc_function_unbind(struct usb_configuration *c, struct usb_function *f) kfree(f->descriptors); kfree(f->hs_descriptors); + kfree(f->ss_descriptors); kfree(uvc); } @@ -496,8 +612,26 @@ uvc_function_bind(struct usb_configuration *c, struct usb_function *f) INFO(cdev, "uvc_function_bind\n"); + /* sanity check the streaming endpoint module parameters */ + if (streaming_interval < 1) + streaming_interval = 1; + if (streaming_interval > 16) + streaming_interval = 16; + if (streaming_mult > 2) + streaming_mult = 2; + if (streaming_maxburst > 15) + streaming_maxburst = 15; + + /* + * fill in the FS video streaming specific descriptors from the + * module parameters + */ + uvc_fs_streaming_ep.wMaxPacketSize = streaming_maxpacket > 1023 ? + 1023 : streaming_maxpacket; + uvc_fs_streaming_ep.bInterval = streaming_interval; + /* Allocate endpoints. */ - ep = usb_ep_autoconfig(cdev->gadget, &uvc_control_ep); + ep = usb_ep_autoconfig(cdev->gadget, &uvc_fs_control_ep); if (!ep) { INFO(cdev, "Unable to allocate control EP\n"); goto error; @@ -505,7 +639,7 @@ uvc_function_bind(struct usb_configuration *c, struct usb_function *f) uvc->control_ep = ep; ep->driver_data = uvc; - ep = usb_ep_autoconfig(cdev->gadget, &uvc_streaming_ep); + ep = usb_ep_autoconfig(cdev->gadget, &uvc_fs_streaming_ep); if (!ep) { INFO(cdev, "Unable to allocate streaming EP\n"); goto error; @@ -526,9 +660,52 @@ uvc_function_bind(struct usb_configuration *c, struct usb_function *f) uvc_streaming_intf_alt1.bInterfaceNumber = ret; uvc->streaming_intf = ret; - /* Copy descriptors. */ + /* sanity check the streaming endpoint module parameters */ + if (streaming_maxpacket > 1024) + streaming_maxpacket = 1024; + + /* Copy descriptors for FS. */ f->descriptors = uvc_copy_descriptors(uvc, USB_SPEED_FULL); - f->hs_descriptors = uvc_copy_descriptors(uvc, USB_SPEED_HIGH); + + /* support high speed hardware */ + if (gadget_is_dualspeed(cdev->gadget)) { + /* + * Fill in the HS descriptors from the module parameters for the + * Video Streaming endpoint. + * NOTE: We assume that the user knows what they are doing and + * won't give parameters that their UDC doesn't support. + */ + uvc_hs_streaming_ep.wMaxPacketSize = streaming_maxpacket; + uvc_hs_streaming_ep.wMaxPacketSize |= streaming_mult << 11; + uvc_hs_streaming_ep.bInterval = streaming_interval; + uvc_hs_streaming_ep.bEndpointAddress = + uvc_fs_streaming_ep.bEndpointAddress; + + /* Copy descriptors. */ + f->hs_descriptors = uvc_copy_descriptors(uvc, USB_SPEED_HIGH); + } + + /* support super speed hardware */ + if (gadget_is_superspeed(c->cdev->gadget)) { + /* + * Fill in the SS descriptors from the module parameters for the + * Video Streaming endpoint. + * NOTE: We assume that the user knows what they are doing and + * won't give parameters that their UDC doesn't support. + */ + uvc_ss_streaming_ep.wMaxPacketSize = streaming_maxpacket; + uvc_ss_streaming_ep.bInterval = streaming_interval; + uvc_ss_streaming_comp.bmAttributes = streaming_mult; + uvc_ss_streaming_comp.bMaxBurst = streaming_maxburst; + uvc_ss_streaming_comp.wBytesPerInterval = + streaming_maxpacket * (streaming_mult + 1) * + (streaming_maxburst + 1); + uvc_ss_streaming_ep.bEndpointAddress = + uvc_fs_streaming_ep.bEndpointAddress; + + /* Copy descriptors. */ + f->ss_descriptors = uvc_copy_descriptors(uvc, USB_SPEED_SUPER); + } /* Preallocate control endpoint request. */ uvc->control_req = usb_ep_alloc_request(cdev->gadget->ep0, GFP_KERNEL); @@ -583,9 +760,11 @@ error: */ int __init uvc_bind_config(struct usb_configuration *c, - const struct uvc_descriptor_header * const *control, + const struct uvc_descriptor_header * const *fs_control, + const struct uvc_descriptor_header * const *ss_control, const struct uvc_descriptor_header * const *fs_streaming, - const struct uvc_descriptor_header * const *hs_streaming) + const struct uvc_descriptor_header * const *hs_streaming, + const struct uvc_descriptor_header * const *ss_streaming) { struct uvc_device *uvc; int ret = 0; @@ -603,38 +782,54 @@ uvc_bind_config(struct usb_configuration *c, uvc->state = UVC_STATE_DISCONNECTED; /* Validate the descriptors. */ - if (control == NULL || control[0] == NULL || - control[0]->bDescriptorSubType != UVC_VC_HEADER) + if (fs_control == NULL || fs_control[0] == NULL || + fs_control[0]->bDescriptorSubType != UVC_VC_HEADER) goto error; - if (fs_streaming == NULL || fs_streaming[0] == NULL || - fs_streaming[0]->bDescriptorSubType != UVC_VS_INPUT_HEADER) + if (ss_control == NULL || ss_control[0] == NULL || + ss_control[0]->bDescriptorSubType != UVC_VC_HEADER) goto error; - if (hs_streaming == NULL || hs_streaming[0] == NULL || - hs_streaming[0]->bDescriptorSubType != UVC_VS_INPUT_HEADER) + if (fs_streaming == NULL || fs_streaming[0] == NULL || + fs_streaming[0]->bDescriptorSubType != UVC_VS_INPUT_HEADER) goto error; - uvc->desc.control = control; - uvc->desc.fs_streaming = fs_streaming; - uvc->desc.hs_streaming = hs_streaming; - - /* Allocate string descriptor numbers. */ - if ((ret = usb_string_id(c->cdev)) < 0) + if (hs_streaming == NULL || hs_streaming[0] == NULL || + hs_streaming[0]->bDescriptorSubType != UVC_VS_INPUT_HEADER) goto error; - uvc_en_us_strings[UVC_STRING_ASSOCIATION_IDX].id = ret; - uvc_iad.iFunction = ret; - if ((ret = usb_string_id(c->cdev)) < 0) + if (ss_streaming == NULL || ss_streaming[0] == NULL || + ss_streaming[0]->bDescriptorSubType != UVC_VS_INPUT_HEADER) goto error; - uvc_en_us_strings[UVC_STRING_CONTROL_IDX].id = ret; - uvc_control_intf.iInterface = ret; - if ((ret = usb_string_id(c->cdev)) < 0) - goto error; - uvc_en_us_strings[UVC_STRING_STREAMING_IDX].id = ret; - uvc_streaming_intf_alt0.iInterface = ret; - uvc_streaming_intf_alt1.iInterface = ret; + uvc->desc.fs_control = fs_control; + uvc->desc.ss_control = ss_control; + uvc->desc.fs_streaming = fs_streaming; + uvc->desc.hs_streaming = hs_streaming; + uvc->desc.ss_streaming = ss_streaming; + + /* maybe allocate device-global string IDs, and patch descriptors */ + if (uvc_en_us_strings[UVC_STRING_ASSOCIATION_IDX].id == 0) { + /* Allocate string descriptor numbers. */ + ret = usb_string_id(c->cdev); + if (ret < 0) + goto error; + uvc_en_us_strings[UVC_STRING_ASSOCIATION_IDX].id = ret; + uvc_iad.iFunction = ret; + + ret = usb_string_id(c->cdev); + if (ret < 0) + goto error; + uvc_en_us_strings[UVC_STRING_CONTROL_IDX].id = ret; + uvc_control_intf.iInterface = ret; + + ret = usb_string_id(c->cdev); + if (ret < 0) + goto error; + uvc_en_us_strings[UVC_STRING_STREAMING_IDX].id = ret; + uvc_streaming_intf_alt0.iInterface = ret; + uvc_streaming_intf_alt1.iInterface = ret; + } /* Register the function. */ uvc->func.name = "uvc"; diff --git a/drivers/usb/gadget/f_uvc.h b/drivers/usb/gadget/f_uvc.h index abf83293513..c3d258d3018 100644 --- a/drivers/usb/gadget/f_uvc.h +++ b/drivers/usb/gadget/f_uvc.h @@ -17,9 +17,11 @@ #include <linux/usb/video.h> extern int uvc_bind_config(struct usb_configuration *c, - const struct uvc_descriptor_header * const *control, - const struct uvc_descriptor_header * const *fs_streaming, - const struct uvc_descriptor_header * const *hs_streaming); + const struct uvc_descriptor_header * const *fs_control, + const struct uvc_descriptor_header * const *hs_control, + const struct uvc_descriptor_header * const *fs_streaming, + const struct uvc_descriptor_header * const *hs_streaming, + const struct uvc_descriptor_header * const *ss_streaming); #endif /* _F_UVC_H_ */ diff --git a/drivers/usb/gadget/fsl_mxc_udc.c b/drivers/usb/gadget/fsl_mxc_udc.c index dcbc0a2e48d..1b0f086426b 100644 --- a/drivers/usb/gadget/fsl_mxc_udc.c +++ b/drivers/usb/gadget/fsl_mxc_udc.c @@ -21,7 +21,8 @@ #include <mach/hardware.h> static struct clk *mxc_ahb_clk; -static struct clk *mxc_usb_clk; +static struct clk *mxc_per_clk; +static struct clk *mxc_ipg_clk; /* workaround ENGcm09152 for i.MX35 */ #define USBPHYCTRL_OTGBASE_OFFSET 0x608 @@ -35,28 +36,31 @@ int fsl_udc_clk_init(struct platform_device *pdev) pdata = pdev->dev.platform_data; - if (!cpu_is_mx35() && !cpu_is_mx25()) { - mxc_ahb_clk = clk_get(&pdev->dev, "usb_ahb"); - if (IS_ERR(mxc_ahb_clk)) - return PTR_ERR(mxc_ahb_clk); + mxc_ipg_clk = devm_clk_get(&pdev->dev, "ipg"); + if (IS_ERR(mxc_ipg_clk)) { + dev_err(&pdev->dev, "clk_get(\"ipg\") failed\n"); + return PTR_ERR(mxc_ipg_clk); + } - ret = clk_enable(mxc_ahb_clk); - if (ret < 0) { - dev_err(&pdev->dev, "clk_enable(\"usb_ahb\") failed\n"); - goto eenahb; - } + mxc_ahb_clk = devm_clk_get(&pdev->dev, "ahb"); + if (IS_ERR(mxc_ahb_clk)) { + dev_err(&pdev->dev, "clk_get(\"ahb\") failed\n"); + return PTR_ERR(mxc_ahb_clk); } - /* make sure USB_CLK is running at 60 MHz +/- 1000 Hz */ - mxc_usb_clk = clk_get(&pdev->dev, "usb"); - if (IS_ERR(mxc_usb_clk)) { - dev_err(&pdev->dev, "clk_get(\"usb\") failed\n"); - ret = PTR_ERR(mxc_usb_clk); - goto egusb; + mxc_per_clk = devm_clk_get(&pdev->dev, "per"); + if (IS_ERR(mxc_per_clk)) { + dev_err(&pdev->dev, "clk_get(\"per\") failed\n"); + return PTR_ERR(mxc_per_clk); } + clk_prepare_enable(mxc_ipg_clk); + clk_prepare_enable(mxc_ahb_clk); + clk_prepare_enable(mxc_per_clk); + + /* make sure USB_CLK is running at 60 MHz +/- 1000 Hz */ if (!cpu_is_mx51()) { - freq = clk_get_rate(mxc_usb_clk); + freq = clk_get_rate(mxc_per_clk); if (pdata->phy_mode != FSL_USB2_PHY_ULPI && (freq < 59999000 || freq > 60001000)) { dev_err(&pdev->dev, "USB_CLK=%lu, should be 60MHz\n", freq); @@ -65,24 +69,13 @@ int fsl_udc_clk_init(struct platform_device *pdev) } } - ret = clk_enable(mxc_usb_clk); - if (ret < 0) { - dev_err(&pdev->dev, "clk_enable(\"usb_clk\") failed\n"); - goto eenusb; - } - return 0; -eenusb: eclkrate: - clk_put(mxc_usb_clk); - mxc_usb_clk = NULL; -egusb: - if (!cpu_is_mx35()) - clk_disable(mxc_ahb_clk); -eenahb: - if (!cpu_is_mx35()) - clk_put(mxc_ahb_clk); + clk_disable_unprepare(mxc_ipg_clk); + clk_disable_unprepare(mxc_ahb_clk); + clk_disable_unprepare(mxc_per_clk); + mxc_per_clk = NULL; return ret; } @@ -104,20 +97,15 @@ void fsl_udc_clk_finalize(struct platform_device *pdev) /* ULPI transceivers don't need usbpll */ if (pdata->phy_mode == FSL_USB2_PHY_ULPI) { - clk_disable(mxc_usb_clk); - clk_put(mxc_usb_clk); - mxc_usb_clk = NULL; + clk_disable_unprepare(mxc_per_clk); + mxc_per_clk = NULL; } } void fsl_udc_clk_release(void) { - if (mxc_usb_clk) { - clk_disable(mxc_usb_clk); - clk_put(mxc_usb_clk); - } - if (!cpu_is_mx35()) { - clk_disable(mxc_ahb_clk); - clk_put(mxc_ahb_clk); - } + if (mxc_per_clk) + clk_disable_unprepare(mxc_per_clk); + clk_disable_unprepare(mxc_ahb_clk); + clk_disable_unprepare(mxc_ipg_clk); } diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c index bc6f9bb9994..3def828f85e 100644 --- a/drivers/usb/gadget/fsl_udc_core.c +++ b/drivers/usb/gadget/fsl_udc_core.c @@ -24,6 +24,7 @@ #include <linux/ioport.h> #include <linux/types.h> #include <linux/errno.h> +#include <linux/err.h> #include <linux/slab.h> #include <linux/init.h> #include <linux/list.h> @@ -1229,7 +1230,7 @@ static int fsl_vbus_draw(struct usb_gadget *gadget, unsigned mA) struct fsl_udc *udc; udc = container_of(gadget, struct fsl_udc, gadget); - if (udc->transceiver) + if (!IS_ERR_OR_NULL(udc->transceiver)) return usb_phy_set_power(udc->transceiver, mA); return -ENOTSUPP; } @@ -1983,13 +1984,13 @@ static int fsl_start(struct usb_gadget_driver *driver, goto out; } - if (udc_controller->transceiver) { + if (!IS_ERR_OR_NULL(udc_controller->transceiver)) { /* Suspend the controller until OTG enable it */ udc_controller->stopped = 1; printk(KERN_INFO "Suspend udc for OTG auto detect\n"); /* connect to bus through transceiver */ - if (udc_controller->transceiver) { + if (!IS_ERR_OR_NULL(udc_controller->transceiver)) { retval = otg_set_peripheral( udc_controller->transceiver->otg, &udc_controller->gadget); @@ -2030,7 +2031,7 @@ static int fsl_stop(struct usb_gadget_driver *driver) if (!driver || driver != udc_controller->driver || !driver->unbind) return -EINVAL; - if (udc_controller->transceiver) + if (!IS_ERR_OR_NULL(udc_controller->transceiver)) otg_set_peripheral(udc_controller->transceiver->otg, NULL); /* stop DR, disable intr */ @@ -2455,8 +2456,8 @@ static int __init fsl_udc_probe(struct platform_device *pdev) #ifdef CONFIG_USB_OTG if (pdata->operating_mode == FSL_USB2_DR_OTG) { - udc_controller->transceiver = usb_get_transceiver(); - if (!udc_controller->transceiver) { + udc_controller->transceiver = usb_get_phy(USB_PHY_TYPE_USB2); + if (IS_ERR_OR_NULL(udc_controller->transceiver)) { ERR("Can't find OTG driver!\n"); ret = -ENODEV; goto err_kfree; @@ -2540,7 +2541,7 @@ static int __init fsl_udc_probe(struct platform_device *pdev) goto err_free_irq; } - if (!udc_controller->transceiver) { + if (IS_ERR_OR_NULL(udc_controller->transceiver)) { /* initialize usb hw reg except for regs for EP, * leave usbintr reg untouched */ dr_controller_setup(udc_controller); @@ -2560,11 +2561,12 @@ static int __init fsl_udc_probe(struct platform_device *pdev) dev_set_name(&udc_controller->gadget.dev, "gadget"); udc_controller->gadget.dev.release = fsl_udc_release; udc_controller->gadget.dev.parent = &pdev->dev; + udc_controller->gadget.dev.of_node = pdev->dev.of_node; ret = device_register(&udc_controller->gadget.dev); if (ret < 0) goto err_free_irq; - if (udc_controller->transceiver) + if (!IS_ERR_OR_NULL(udc_controller->transceiver)) udc_controller->gadget.is_otg = 1; /* setup QH and epctrl for ep0 */ diff --git a/drivers/usb/gadget/imx_udc.c b/drivers/usb/gadget/imx_udc.c index 54034f84f99..dc5334856af 100644 --- a/drivers/usb/gadget/imx_udc.c +++ b/drivers/usb/gadget/imx_udc.c @@ -1432,7 +1432,7 @@ static int __init imx_udc_probe(struct platform_device *pdev) dev_err(&pdev->dev, "can't get USB clock\n"); goto fail2; } - clk_enable(clk); + clk_prepare_enable(clk); if (clk_get_rate(clk) != 48000000) { D_INI(&pdev->dev, @@ -1496,7 +1496,7 @@ fail4: free_irq(imx_usb->usbd_int[i], imx_usb); fail3: clk_put(clk); - clk_disable(clk); + clk_disable_unprepare(clk); fail2: iounmap(base); fail1: @@ -1521,7 +1521,7 @@ static int __exit imx_udc_remove(struct platform_device *pdev) free_irq(imx_usb->usbd_int[i], imx_usb); clk_put(imx_usb->clk); - clk_disable(imx_usb->clk); + clk_disable_unprepare(imx_usb->clk); iounmap(imx_usb->base); release_mem_region(imx_usb->res->start, resource_size(imx_usb->res)); diff --git a/drivers/usb/gadget/lpc32xx_udc.c b/drivers/usb/gadget/lpc32xx_udc.c index 2ab0388d93e..f1ec99e69cb 100644 --- a/drivers/usb/gadget/lpc32xx_udc.c +++ b/drivers/usb/gadget/lpc32xx_udc.c @@ -165,6 +165,7 @@ struct lpc32xx_udc { int udp_irq[4]; struct clk *usb_pll_clk; struct clk *usb_slv_clk; + struct clk *usb_otg_clk; /* DMA support */ u32 *udca_v_base; @@ -227,33 +228,15 @@ static inline struct lpc32xx_udc *to_udc(struct usb_gadget *g) #define UDCA_BUFF_SIZE (128) /* TODO: When the clock framework is introduced in LPC32xx, IO_ADDRESS will - * be replaced with an inremap()ed pointer, see USB_OTG_CLK_CTRL() + * be replaced with an inremap()ed pointer * */ #define USB_CTRL IO_ADDRESS(LPC32XX_CLK_PM_BASE + 0x64) -#define USB_CLOCK_MASK (AHB_M_CLOCK_ON | OTG_CLOCK_ON | \ - DEV_CLOCK_ON | I2C_CLOCK_ON) /* USB_CTRL bit defines */ #define USB_SLAVE_HCLK_EN (1 << 24) #define USB_HOST_NEED_CLK_EN (1 << 21) #define USB_DEV_NEED_CLK_EN (1 << 22) -#define USB_OTG_CLK_CTRL(udc) ((udc)->udp_baseaddr + 0xFF4) -#define USB_OTG_CLK_STAT(udc) ((udc)->udp_baseaddr + 0xFF8) - -/* USB_OTG_CLK_CTRL bit defines */ -#define AHB_M_CLOCK_ON (1 << 4) -#define OTG_CLOCK_ON (1 << 3) -#define I2C_CLOCK_ON (1 << 2) -#define DEV_CLOCK_ON (1 << 1) -#define HOST_CLOCK_ON (1 << 0) - -#define USB_OTG_STAT_CONTROL(udc) (udc->udp_baseaddr + 0x110) - -/* USB_OTG_STAT_CONTROL bit defines */ -#define TRANSPARENT_I2C_EN (1 << 7) -#define HOST_EN (1 << 0) - /********************************************************************** * USB device controller register offsets **********************************************************************/ @@ -677,7 +660,7 @@ static void isp1301_udc_configure(struct lpc32xx_udc *udc) ISP1301_I2C_INTERRUPT_RISING, INT_VBUS_VLD); /* Enable usb_need_clk clock after transceiver is initialized */ - writel((readl(USB_CTRL) | (1 << 22)), USB_CTRL); + writel((readl(USB_CTRL) | USB_DEV_NEED_CLK_EN), USB_CTRL); dev_info(udc->dev, "ISP1301 Vendor ID : 0x%04x\n", i2c_smbus_read_word_data(udc->isp1301_i2c_client, 0x00)); @@ -1010,11 +993,8 @@ static void udc_dd_free(struct lpc32xx_udc *udc, struct lpc32xx_usbd_dd_gad *dd) /* Enables or disables most of the USB system clocks when low power mode is * needed. Clocks are typically started on a connection event, and disabled * when a cable is disconnected */ -#define OTGOFF_CLK_MASK (AHB_M_CLOCK_ON | I2C_CLOCK_ON) static void udc_clk_set(struct lpc32xx_udc *udc, int enable) { - int to = 1000; - if (enable != 0) { if (udc->clocked) return; @@ -1028,14 +1008,7 @@ static void udc_clk_set(struct lpc32xx_udc *udc, int enable) writel(readl(USB_CTRL) | USB_DEV_NEED_CLK_EN, USB_CTRL); - /* Set to enable all needed USB OTG clocks */ - writel(USB_CLOCK_MASK, USB_OTG_CLK_CTRL(udc)); - - while (((readl(USB_OTG_CLK_STAT(udc)) & USB_CLOCK_MASK) != - USB_CLOCK_MASK) && (to > 0)) - to--; - if (!to) - dev_dbg(udc->dev, "Cannot enable USB OTG clocking\n"); + clk_enable(udc->usb_otg_clk); } else { if (!udc->clocked) return; @@ -1047,19 +1020,11 @@ static void udc_clk_set(struct lpc32xx_udc *udc, int enable) /* 48MHz PLL dpwn */ clk_disable(udc->usb_pll_clk); - /* Enable the USB device clock */ + /* Disable the USB device clock */ writel(readl(USB_CTRL) & ~USB_DEV_NEED_CLK_EN, USB_CTRL); - /* Set to enable all needed USB OTG clocks */ - writel(OTGOFF_CLK_MASK, USB_OTG_CLK_CTRL(udc)); - - while (((readl(USB_OTG_CLK_STAT(udc)) & - OTGOFF_CLK_MASK) != - OTGOFF_CLK_MASK) && (to > 0)) - to--; - if (!to) - dev_dbg(udc->dev, "Cannot disable USB OTG clocking\n"); + clk_disable(udc->usb_otg_clk); } } @@ -3041,6 +3006,7 @@ static int lpc32xx_start(struct usb_gadget_driver *driver, udc->driver = driver; udc->gadget.dev.driver = &driver->driver; + udc->gadget.dev.of_node = udc->dev->of_node; udc->enabled = 1; udc->selfpowered = 1; udc->vbus = 0; @@ -3239,6 +3205,12 @@ static int __init lpc32xx_udc_probe(struct platform_device *pdev) retval = PTR_ERR(udc->usb_slv_clk); goto usb_clk_get_fail; } + udc->usb_otg_clk = clk_get(&pdev->dev, "ck_usb_otg"); + if (IS_ERR(udc->usb_otg_clk)) { + dev_err(udc->dev, "failed to acquire USB otg clock\n"); + retval = PTR_ERR(udc->usb_slv_clk); + goto usb_otg_clk_get_fail; + } /* Setup PLL clock to 48MHz */ retval = clk_enable(udc->usb_pll_clk); @@ -3262,15 +3234,12 @@ static int __init lpc32xx_udc_probe(struct platform_device *pdev) goto usb_clk_enable_fail; } - /* Set to enable all needed USB OTG clocks */ - writel(USB_CLOCK_MASK, USB_OTG_CLK_CTRL(udc)); - - i = 1000; - while (((readl(USB_OTG_CLK_STAT(udc)) & USB_CLOCK_MASK) != - USB_CLOCK_MASK) && (i > 0)) - i--; - if (!i) - dev_dbg(udc->dev, "USB OTG clocks not correctly enabled\n"); + /* Enable USB OTG clock */ + retval = clk_enable(udc->usb_otg_clk); + if (retval < 0) { + dev_err(udc->dev, "failed to start USB otg clock\n"); + goto usb_otg_clk_enable_fail; + } /* Setup deferred workqueue data */ udc->poweron = udc->pullup = 0; @@ -3390,12 +3359,16 @@ dma_alloc_fail: dma_free_coherent(&pdev->dev, UDCA_BUFF_SIZE, udc->udca_v_base, udc->udca_p_base); i2c_fail: + clk_disable(udc->usb_otg_clk); +usb_otg_clk_enable_fail: clk_disable(udc->usb_slv_clk); usb_clk_enable_fail: pll_set_fail: clk_disable(udc->usb_pll_clk); pll_enable_fail: clk_put(udc->usb_slv_clk); +usb_otg_clk_get_fail: + clk_put(udc->usb_otg_clk); usb_clk_get_fail: clk_put(udc->usb_pll_clk); pll_get_fail: @@ -3433,6 +3406,8 @@ static int __devexit lpc32xx_udc_remove(struct platform_device *pdev) device_unregister(&udc->gadget.dev); + clk_disable(udc->usb_otg_clk); + clk_put(udc->usb_otg_clk); clk_disable(udc->usb_slv_clk); clk_put(udc->usb_slv_clk); clk_disable(udc->usb_pll_clk); @@ -3446,7 +3421,6 @@ static int __devexit lpc32xx_udc_remove(struct platform_device *pdev) #ifdef CONFIG_PM static int lpc32xx_udc_suspend(struct platform_device *pdev, pm_message_t mesg) { - int to = 1000; struct lpc32xx_udc *udc = platform_get_drvdata(pdev); if (udc->clocked) { @@ -3461,15 +3435,6 @@ static int lpc32xx_udc_suspend(struct platform_device *pdev, pm_message_t mesg) on resume */ udc->clocked = 1; - /* Kill OTG and I2C clocks */ - writel(0, USB_OTG_CLK_CTRL(udc)); - while (((readl(USB_OTG_CLK_STAT(udc)) & OTGOFF_CLK_MASK) != - OTGOFF_CLK_MASK) && (to > 0)) - to--; - if (!to) - dev_dbg(udc->dev, - "USB OTG clocks not correctly enabled\n"); - /* Kill global USB clock */ clk_disable(udc->usb_slv_clk); } diff --git a/drivers/usb/gadget/mv_u3d.h b/drivers/usb/gadget/mv_u3d.h new file mode 100644 index 00000000000..e32a787ac37 --- /dev/null +++ b/drivers/usb/gadget/mv_u3d.h @@ -0,0 +1,320 @@ +/* + * Copyright (C) 2011 Marvell International Ltd. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + */ + +#ifndef __MV_U3D_H +#define __MV_U3D_H + +#define MV_U3D_EP_CONTEXT_ALIGNMENT 32 +#define MV_U3D_TRB_ALIGNMENT 16 +#define MV_U3D_DMA_BOUNDARY 4096 +#define MV_U3D_EP0_MAX_PKT_SIZE 512 + +/* ep0 transfer state */ +#define MV_U3D_WAIT_FOR_SETUP 0 +#define MV_U3D_DATA_STATE_XMIT 1 +#define MV_U3D_DATA_STATE_NEED_ZLP 2 +#define MV_U3D_WAIT_FOR_OUT_STATUS 3 +#define MV_U3D_DATA_STATE_RECV 4 +#define MV_U3D_STATUS_STAGE 5 + +#define MV_U3D_EP_MAX_LENGTH_TRANSFER 0x10000 + +/* USB3 Interrupt Status */ +#define MV_U3D_USBINT_SETUP 0x00000001 +#define MV_U3D_USBINT_RX_COMPLETE 0x00000002 +#define MV_U3D_USBINT_TX_COMPLETE 0x00000004 +#define MV_U3D_USBINT_UNDER_RUN 0x00000008 +#define MV_U3D_USBINT_RXDESC_ERR 0x00000010 +#define MV_U3D_USBINT_TXDESC_ERR 0x00000020 +#define MV_U3D_USBINT_RX_TRB_COMPLETE 0x00000040 +#define MV_U3D_USBINT_TX_TRB_COMPLETE 0x00000080 +#define MV_U3D_USBINT_VBUS_VALID 0x00010000 +#define MV_U3D_USBINT_STORAGE_CMD_FULL 0x00020000 +#define MV_U3D_USBINT_LINK_CHG 0x01000000 + +/* USB3 Interrupt Enable */ +#define MV_U3D_INTR_ENABLE_SETUP 0x00000001 +#define MV_U3D_INTR_ENABLE_RX_COMPLETE 0x00000002 +#define MV_U3D_INTR_ENABLE_TX_COMPLETE 0x00000004 +#define MV_U3D_INTR_ENABLE_UNDER_RUN 0x00000008 +#define MV_U3D_INTR_ENABLE_RXDESC_ERR 0x00000010 +#define MV_U3D_INTR_ENABLE_TXDESC_ERR 0x00000020 +#define MV_U3D_INTR_ENABLE_RX_TRB_COMPLETE 0x00000040 +#define MV_U3D_INTR_ENABLE_TX_TRB_COMPLETE 0x00000080 +#define MV_U3D_INTR_ENABLE_RX_BUFFER_ERR 0x00000100 +#define MV_U3D_INTR_ENABLE_VBUS_VALID 0x00010000 +#define MV_U3D_INTR_ENABLE_STORAGE_CMD_FULL 0x00020000 +#define MV_U3D_INTR_ENABLE_LINK_CHG 0x01000000 +#define MV_U3D_INTR_ENABLE_PRIME_STATUS 0x02000000 + +/* USB3 Link Change */ +#define MV_U3D_LINK_CHANGE_LINK_UP 0x00000001 +#define MV_U3D_LINK_CHANGE_SUSPEND 0x00000002 +#define MV_U3D_LINK_CHANGE_RESUME 0x00000004 +#define MV_U3D_LINK_CHANGE_WRESET 0x00000008 +#define MV_U3D_LINK_CHANGE_HRESET 0x00000010 +#define MV_U3D_LINK_CHANGE_VBUS_INVALID 0x00000020 +#define MV_U3D_LINK_CHANGE_INACT 0x00000040 +#define MV_U3D_LINK_CHANGE_DISABLE_AFTER_U0 0x00000080 +#define MV_U3D_LINK_CHANGE_U1 0x00000100 +#define MV_U3D_LINK_CHANGE_U2 0x00000200 +#define MV_U3D_LINK_CHANGE_U3 0x00000400 + +/* bridge setting */ +#define MV_U3D_BRIDGE_SETTING_VBUS_VALID (1 << 16) + +/* Command Register Bit Masks */ +#define MV_U3D_CMD_RUN_STOP 0x00000001 +#define MV_U3D_CMD_CTRL_RESET 0x00000002 + +/* ep control register */ +#define MV_U3D_EPXCR_EP_TYPE_CONTROL 0 +#define MV_U3D_EPXCR_EP_TYPE_ISOC 1 +#define MV_U3D_EPXCR_EP_TYPE_BULK 2 +#define MV_U3D_EPXCR_EP_TYPE_INT 3 +#define MV_U3D_EPXCR_EP_ENABLE_SHIFT 4 +#define MV_U3D_EPXCR_MAX_BURST_SIZE_SHIFT 12 +#define MV_U3D_EPXCR_MAX_PACKET_SIZE_SHIFT 16 +#define MV_U3D_USB_BULK_BURST_OUT 6 +#define MV_U3D_USB_BULK_BURST_IN 14 + +#define MV_U3D_EPXCR_EP_FLUSH (1 << 7) +#define MV_U3D_EPXCR_EP_HALT (1 << 1) +#define MV_U3D_EPXCR_EP_INIT (1) + +/* TX/RX Status Register */ +#define MV_U3D_XFERSTATUS_COMPLETE_SHIFT 24 +#define MV_U3D_COMPLETE_INVALID 0 +#define MV_U3D_COMPLETE_SUCCESS 1 +#define MV_U3D_COMPLETE_BUFF_ERR 2 +#define MV_U3D_COMPLETE_SHORT_PACKET 3 +#define MV_U3D_COMPLETE_TRB_ERR 5 +#define MV_U3D_XFERSTATUS_TRB_LENGTH_MASK (0xFFFFFF) + +#define MV_U3D_USB_LINK_BYPASS_VBUS 0x8 + +#define MV_U3D_LTSSM_PHY_INIT_DONE 0x80000000 +#define MV_U3D_LTSSM_NEVER_GO_COMPLIANCE 0x40000000 + +#define MV_U3D_USB3_OP_REGS_OFFSET 0x100 +#define MV_U3D_USB3_PHY_OFFSET 0xB800 + +#define DCS_ENABLE 0x1 + +/* timeout */ +#define MV_U3D_RESET_TIMEOUT 10000 +#define MV_U3D_FLUSH_TIMEOUT 100000 +#define MV_U3D_OWN_TIMEOUT 10000 +#define LOOPS_USEC_SHIFT 4 +#define LOOPS_USEC (1 << LOOPS_USEC_SHIFT) +#define LOOPS(timeout) ((timeout) >> LOOPS_USEC_SHIFT) + +/* ep direction */ +#define MV_U3D_EP_DIR_IN 1 +#define MV_U3D_EP_DIR_OUT 0 +#define mv_u3d_ep_dir(ep) (((ep)->ep_num == 0) ? \ + ((ep)->u3d->ep0_dir) : ((ep)->direction)) + +/* usb capability registers */ +struct mv_u3d_cap_regs { + u32 rsvd[5]; + u32 dboff; /* doorbell register offset */ + u32 rtsoff; /* runtime register offset */ + u32 vuoff; /* vendor unique register offset */ +}; + +/* operation registers */ +struct mv_u3d_op_regs { + u32 usbcmd; /* Command register */ + u32 rsvd1[11]; + u32 dcbaapl; /* Device Context Base Address low register */ + u32 dcbaaph; /* Device Context Base Address high register */ + u32 rsvd2[243]; + u32 portsc; /* port status and control register*/ + u32 portlinkinfo; /* port link info register*/ + u32 rsvd3[9917]; + u32 doorbell; /* doorbell register */ +}; + +/* control enpoint enable registers */ +struct epxcr { + u32 epxoutcr0; /* ep out control 0 register */ + u32 epxoutcr1; /* ep out control 1 register */ + u32 epxincr0; /* ep in control 0 register */ + u32 epxincr1; /* ep in control 1 register */ +}; + +/* transfer status registers */ +struct xferstatus { + u32 curdeqlo; /* current TRB pointer low */ + u32 curdeqhi; /* current TRB pointer high */ + u32 statuslo; /* transfer status low */ + u32 statushi; /* transfer status high */ +}; + +/* vendor unique control registers */ +struct mv_u3d_vuc_regs { + u32 ctrlepenable; /* control endpoint enable register */ + u32 setuplock; /* setup lock register */ + u32 endcomplete; /* endpoint transfer complete register */ + u32 intrcause; /* interrupt cause register */ + u32 intrenable; /* interrupt enable register */ + u32 trbcomplete; /* TRB complete register */ + u32 linkchange; /* link change register */ + u32 rsvd1[5]; + u32 trbunderrun; /* TRB underrun register */ + u32 rsvd2[43]; + u32 bridgesetting; /* bridge setting register */ + u32 rsvd3[7]; + struct xferstatus txst[16]; /* TX status register */ + struct xferstatus rxst[16]; /* RX status register */ + u32 ltssm; /* LTSSM control register */ + u32 pipe; /* PIPE control register */ + u32 linkcr0; /* link control 0 register */ + u32 linkcr1; /* link control 1 register */ + u32 rsvd6[60]; + u32 mib0; /* MIB0 counter register */ + u32 usblink; /* usb link control register */ + u32 ltssmstate; /* LTSSM state register */ + u32 linkerrorcause; /* link error cause register */ + u32 rsvd7[60]; + u32 devaddrtiebrkr; /* device address and tie breaker */ + u32 itpinfo0; /* ITP info 0 register */ + u32 itpinfo1; /* ITP info 1 register */ + u32 rsvd8[61]; + struct epxcr epcr[16]; /* ep control register */ + u32 rsvd9[64]; + u32 phyaddr; /* PHY address register */ + u32 phydata; /* PHY data register */ +}; + +/* Endpoint context structure */ +struct mv_u3d_ep_context { + u32 rsvd0; + u32 rsvd1; + u32 trb_addr_lo; /* TRB address low 32 bit */ + u32 trb_addr_hi; /* TRB address high 32 bit */ + u32 rsvd2; + u32 rsvd3; + struct usb_ctrlrequest setup_buffer; /* setup data buffer */ +}; + +/* TRB control data structure */ +struct mv_u3d_trb_ctrl { + u32 own:1; /* owner of TRB */ + u32 rsvd1:3; + u32 chain:1; /* associate this TRB with the + next TRB on the Ring */ + u32 ioc:1; /* interrupt on complete */ + u32 rsvd2:4; + u32 type:6; /* TRB type */ +#define TYPE_NORMAL 1 +#define TYPE_DATA 3 +#define TYPE_LINK 6 + u32 dir:1; /* Working at data stage of control endpoint + operation. 0 is OUT and 1 is IN. */ + u32 rsvd3:15; +}; + +/* TRB data structure + * For multiple TRB, all the TRBs' physical address should be continuous. + */ +struct mv_u3d_trb_hw { + u32 buf_addr_lo; /* data buffer address low 32 bit */ + u32 buf_addr_hi; /* data buffer address high 32 bit */ + u32 trb_len; /* transfer length */ + struct mv_u3d_trb_ctrl ctrl; /* TRB control data */ +}; + +/* TRB structure */ +struct mv_u3d_trb { + struct mv_u3d_trb_hw *trb_hw; /* point to the trb_hw structure */ + dma_addr_t trb_dma; /* dma address for this trb_hw */ + struct list_head trb_list; /* trb list */ +}; + +/* device data structure */ +struct mv_u3d { + struct usb_gadget gadget; + struct usb_gadget_driver *driver; + spinlock_t lock; /* device lock */ + struct completion *done; + struct device *dev; + int irq; + + /* usb controller registers */ + struct mv_u3d_cap_regs __iomem *cap_regs; + struct mv_u3d_op_regs __iomem *op_regs; + struct mv_u3d_vuc_regs __iomem *vuc_regs; + void __iomem *phy_regs; + + unsigned int max_eps; + struct mv_u3d_ep_context *ep_context; + size_t ep_context_size; + dma_addr_t ep_context_dma; + + struct dma_pool *trb_pool; /* for TRB data structure */ + struct mv_u3d_ep *eps; + + struct mv_u3d_req *status_req; /* ep0 status request */ + struct usb_ctrlrequest local_setup_buff; /* store setup data*/ + + unsigned int resume_state; /* USB state to resume */ + unsigned int usb_state; /* USB current state */ + unsigned int ep0_state; /* Endpoint zero state */ + unsigned int ep0_dir; + + unsigned int dev_addr; /* device address */ + + unsigned int errors; + + unsigned softconnect:1; + unsigned vbus_active:1; /* vbus is active or not */ + unsigned remote_wakeup:1; /* support remote wakeup */ + unsigned clock_gating:1; /* clock gating or not */ + unsigned active:1; /* udc is active or not */ + unsigned vbus_valid_detect:1; /* udc vbus detection */ + + struct mv_usb_addon_irq *vbus; + unsigned int power; + + struct clk *clk; +}; + +/* endpoint data structure */ +struct mv_u3d_ep { + struct usb_ep ep; + struct mv_u3d *u3d; + struct list_head queue; /* ep request queued hardware */ + struct list_head req_list; /* list of ep request */ + struct mv_u3d_ep_context *ep_context; /* ep context */ + u32 direction; + char name[14]; + u32 processing; /* there is ep request + queued on haredware */ + spinlock_t req_lock; /* ep lock */ + unsigned wedge:1; + unsigned enabled:1; + unsigned ep_type:2; + unsigned ep_num:8; +}; + +/* request data structure */ +struct mv_u3d_req { + struct usb_request req; + struct mv_u3d_ep *ep; + struct list_head queue; /* ep requst queued on hardware */ + struct list_head list; /* ep request list */ + struct list_head trb_list; /* trb list of a request */ + + struct mv_u3d_trb *trb_head; /* point to first trb of a request */ + unsigned trb_count; /* TRB number in the chain */ + unsigned chain; /* TRB chain or not */ +}; + +#endif diff --git a/drivers/usb/gadget/mv_u3d_core.c b/drivers/usb/gadget/mv_u3d_core.c new file mode 100644 index 00000000000..8cfd5b028db --- /dev/null +++ b/drivers/usb/gadget/mv_u3d_core.c @@ -0,0 +1,2098 @@ +/* + * Copyright (C) 2011 Marvell International Ltd. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/dma-mapping.h> +#include <linux/dmapool.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/ioport.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/timer.h> +#include <linux/list.h> +#include <linux/notifier.h> +#include <linux/interrupt.h> +#include <linux/moduleparam.h> +#include <linux/device.h> +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> +#include <linux/pm.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/platform_device.h> +#include <linux/platform_data/mv_usb.h> +#include <linux/clk.h> +#include <asm/system.h> +#include <asm/unaligned.h> +#include <asm/byteorder.h> + +#include "mv_u3d.h" + +#define DRIVER_DESC "Marvell PXA USB3.0 Device Controller driver" + +static const char driver_name[] = "mv_u3d"; +static const char driver_desc[] = DRIVER_DESC; + +static void mv_u3d_nuke(struct mv_u3d_ep *ep, int status); +static void mv_u3d_stop_activity(struct mv_u3d *u3d, + struct usb_gadget_driver *driver); + +/* for endpoint 0 operations */ +static const struct usb_endpoint_descriptor mv_u3d_ep0_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bEndpointAddress = 0, + .bmAttributes = USB_ENDPOINT_XFER_CONTROL, + .wMaxPacketSize = MV_U3D_EP0_MAX_PKT_SIZE, +}; + +static void mv_u3d_ep0_reset(struct mv_u3d *u3d) +{ + struct mv_u3d_ep *ep; + u32 epxcr; + int i; + + for (i = 0; i < 2; i++) { + ep = &u3d->eps[i]; + ep->u3d = u3d; + + /* ep0 ep context, ep0 in and out share the same ep context */ + ep->ep_context = &u3d->ep_context[1]; + } + + /* reset ep state machine */ + /* reset ep0 out */ + epxcr = ioread32(&u3d->vuc_regs->epcr[0].epxoutcr0); + epxcr |= MV_U3D_EPXCR_EP_INIT; + iowrite32(epxcr, &u3d->vuc_regs->epcr[0].epxoutcr0); + udelay(5); + epxcr &= ~MV_U3D_EPXCR_EP_INIT; + iowrite32(epxcr, &u3d->vuc_regs->epcr[0].epxoutcr0); + + epxcr = ((MV_U3D_EP0_MAX_PKT_SIZE + << MV_U3D_EPXCR_MAX_PACKET_SIZE_SHIFT) + | (1 << MV_U3D_EPXCR_MAX_BURST_SIZE_SHIFT) + | (1 << MV_U3D_EPXCR_EP_ENABLE_SHIFT) + | MV_U3D_EPXCR_EP_TYPE_CONTROL); + iowrite32(epxcr, &u3d->vuc_regs->epcr[0].epxoutcr1); + + /* reset ep0 in */ + epxcr = ioread32(&u3d->vuc_regs->epcr[0].epxincr0); + epxcr |= MV_U3D_EPXCR_EP_INIT; + iowrite32(epxcr, &u3d->vuc_regs->epcr[0].epxincr0); + udelay(5); + epxcr &= ~MV_U3D_EPXCR_EP_INIT; + iowrite32(epxcr, &u3d->vuc_regs->epcr[0].epxincr0); + + epxcr = ((MV_U3D_EP0_MAX_PKT_SIZE + << MV_U3D_EPXCR_MAX_PACKET_SIZE_SHIFT) + | (1 << MV_U3D_EPXCR_MAX_BURST_SIZE_SHIFT) + | (1 << MV_U3D_EPXCR_EP_ENABLE_SHIFT) + | MV_U3D_EPXCR_EP_TYPE_CONTROL); + iowrite32(epxcr, &u3d->vuc_regs->epcr[0].epxincr1); +} + +static void mv_u3d_ep0_stall(struct mv_u3d *u3d) +{ + u32 tmp; + dev_dbg(u3d->dev, "%s\n", __func__); + + /* set TX and RX to stall */ + tmp = ioread32(&u3d->vuc_regs->epcr[0].epxoutcr0); + tmp |= MV_U3D_EPXCR_EP_HALT; + iowrite32(tmp, &u3d->vuc_regs->epcr[0].epxoutcr0); + + tmp = ioread32(&u3d->vuc_regs->epcr[0].epxincr0); + tmp |= MV_U3D_EPXCR_EP_HALT; + iowrite32(tmp, &u3d->vuc_regs->epcr[0].epxincr0); + + /* update ep0 state */ + u3d->ep0_state = MV_U3D_WAIT_FOR_SETUP; + u3d->ep0_dir = MV_U3D_EP_DIR_OUT; +} + +static int mv_u3d_process_ep_req(struct mv_u3d *u3d, int index, + struct mv_u3d_req *curr_req) +{ + struct mv_u3d_trb *curr_trb; + dma_addr_t cur_deq_lo; + struct mv_u3d_ep_context *curr_ep_context; + int trb_complete, actual, remaining_length; + int direction, ep_num; + int retval = 0; + u32 tmp, status, length; + + curr_ep_context = &u3d->ep_context[index]; + direction = index % 2; + ep_num = index / 2; + + trb_complete = 0; + actual = curr_req->req.length; + + while (!list_empty(&curr_req->trb_list)) { + curr_trb = list_entry(curr_req->trb_list.next, + struct mv_u3d_trb, trb_list); + if (!curr_trb->trb_hw->ctrl.own) { + dev_err(u3d->dev, "%s, TRB own error!\n", + u3d->eps[index].name); + return 1; + } + + curr_trb->trb_hw->ctrl.own = 0; + if (direction == MV_U3D_EP_DIR_OUT) { + tmp = ioread32(&u3d->vuc_regs->rxst[ep_num].statuslo); + cur_deq_lo = + ioread32(&u3d->vuc_regs->rxst[ep_num].curdeqlo); + } else { + tmp = ioread32(&u3d->vuc_regs->txst[ep_num].statuslo); + cur_deq_lo = + ioread32(&u3d->vuc_regs->txst[ep_num].curdeqlo); + } + + status = tmp >> MV_U3D_XFERSTATUS_COMPLETE_SHIFT; + length = tmp & MV_U3D_XFERSTATUS_TRB_LENGTH_MASK; + + if (status == MV_U3D_COMPLETE_SUCCESS || + (status == MV_U3D_COMPLETE_SHORT_PACKET && + direction == MV_U3D_EP_DIR_OUT)) { + remaining_length += length; + actual -= remaining_length; + } else { + dev_err(u3d->dev, + "complete_tr error: ep=%d %s: error = 0x%x\n", + index >> 1, direction ? "SEND" : "RECV", + status); + retval = -EPROTO; + } + + list_del_init(&curr_trb->trb_list); + } + if (retval) + return retval; + + curr_req->req.actual = actual; + return 0; +} + +/* + * mv_u3d_done() - retire a request; caller blocked irqs + * @status : request status to be set, only works when + * request is still in progress. + */ +static +void mv_u3d_done(struct mv_u3d_ep *ep, struct mv_u3d_req *req, int status) +{ + struct mv_u3d *u3d = (struct mv_u3d *)ep->u3d; + + dev_dbg(u3d->dev, "mv_u3d_done: remove req->queue\n"); + /* Removed the req from ep queue */ + list_del_init(&req->queue); + + /* req.status should be set as -EINPROGRESS in ep_queue() */ + if (req->req.status == -EINPROGRESS) + req->req.status = status; + else + status = req->req.status; + + /* Free trb for the request */ + if (!req->chain) + dma_pool_free(u3d->trb_pool, + req->trb_head->trb_hw, req->trb_head->trb_dma); + else { + dma_unmap_single(ep->u3d->gadget.dev.parent, + (dma_addr_t)req->trb_head->trb_dma, + req->trb_count * sizeof(struct mv_u3d_trb_hw), + DMA_BIDIRECTIONAL); + kfree(req->trb_head->trb_hw); + } + kfree(req->trb_head); + + usb_gadget_unmap_request(&u3d->gadget, &req->req, mv_u3d_ep_dir(ep)); + + if (status && (status != -ESHUTDOWN)) { + dev_dbg(u3d->dev, "complete %s req %p stat %d len %u/%u", + ep->ep.name, &req->req, status, + req->req.actual, req->req.length); + } + + spin_unlock(&ep->u3d->lock); + /* + * complete() is from gadget layer, + * eg fsg->bulk_in_complete() + */ + if (req->req.complete) + req->req.complete(&ep->ep, &req->req); + + spin_lock(&ep->u3d->lock); +} + +static int mv_u3d_queue_trb(struct mv_u3d_ep *ep, struct mv_u3d_req *req) +{ + u32 tmp, direction; + struct mv_u3d *u3d; + struct mv_u3d_ep_context *ep_context; + int retval = 0; + + u3d = ep->u3d; + direction = mv_u3d_ep_dir(ep); + + /* ep0 in and out share the same ep context slot 1*/ + if (ep->ep_num == 0) + ep_context = &(u3d->ep_context[1]); + else + ep_context = &(u3d->ep_context[ep->ep_num * 2 + direction]); + + /* check if the pipe is empty or not */ + if (!list_empty(&ep->queue)) { + dev_err(u3d->dev, "add trb to non-empty queue!\n"); + retval = -ENOMEM; + WARN_ON(1); + } else { + ep_context->rsvd0 = cpu_to_le32(1); + ep_context->rsvd1 = 0; + + /* Configure the trb address and set the DCS bit. + * Both DCS bit and own bit in trb should be set. + */ + ep_context->trb_addr_lo = + cpu_to_le32(req->trb_head->trb_dma | DCS_ENABLE); + ep_context->trb_addr_hi = 0; + + /* Ensure that updates to the EP Context will + * occure before Ring Bell. + */ + wmb(); + + /* ring bell the ep */ + if (ep->ep_num == 0) + tmp = 0x1; + else + tmp = ep->ep_num * 2 + + ((direction == MV_U3D_EP_DIR_OUT) ? 0 : 1); + + iowrite32(tmp, &u3d->op_regs->doorbell); + } + return retval; +} + +static struct mv_u3d_trb *mv_u3d_build_trb_one(struct mv_u3d_req *req, + unsigned *length, dma_addr_t *dma) +{ + u32 temp; + unsigned int direction; + struct mv_u3d_trb *trb; + struct mv_u3d_trb_hw *trb_hw; + struct mv_u3d *u3d; + + /* how big will this transfer be? */ + *length = req->req.length - req->req.actual; + BUG_ON(*length > (unsigned)MV_U3D_EP_MAX_LENGTH_TRANSFER); + + u3d = req->ep->u3d; + + trb = kzalloc(sizeof(*trb), GFP_ATOMIC); + if (!trb) { + dev_err(u3d->dev, "%s, trb alloc fail\n", __func__); + return NULL; + } + + /* + * Be careful that no _GFP_HIGHMEM is set, + * or we can not use dma_to_virt + * cannot use GFP_KERNEL in spin lock + */ + trb_hw = dma_pool_alloc(u3d->trb_pool, GFP_ATOMIC, dma); + if (!trb_hw) { + dev_err(u3d->dev, + "%s, dma_pool_alloc fail\n", __func__); + return NULL; + } + trb->trb_dma = *dma; + trb->trb_hw = trb_hw; + + /* initialize buffer page pointers */ + temp = (u32)(req->req.dma + req->req.actual); + + trb_hw->buf_addr_lo = cpu_to_le32(temp); + trb_hw->buf_addr_hi = 0; + trb_hw->trb_len = cpu_to_le32(*length); + trb_hw->ctrl.own = 1; + + if (req->ep->ep_num == 0) + trb_hw->ctrl.type = TYPE_DATA; + else + trb_hw->ctrl.type = TYPE_NORMAL; + + req->req.actual += *length; + + direction = mv_u3d_ep_dir(req->ep); + if (direction == MV_U3D_EP_DIR_IN) + trb_hw->ctrl.dir = 1; + else + trb_hw->ctrl.dir = 0; + + /* Enable interrupt for the last trb of a request */ + if (!req->req.no_interrupt) + trb_hw->ctrl.ioc = 1; + + trb_hw->ctrl.chain = 0; + + wmb(); + return trb; +} + +static int mv_u3d_build_trb_chain(struct mv_u3d_req *req, unsigned *length, + struct mv_u3d_trb *trb, int *is_last) +{ + u32 temp; + unsigned int direction; + struct mv_u3d *u3d; + + /* how big will this transfer be? */ + *length = min(req->req.length - req->req.actual, + (unsigned)MV_U3D_EP_MAX_LENGTH_TRANSFER); + + u3d = req->ep->u3d; + + trb->trb_dma = 0; + + /* initialize buffer page pointers */ + temp = (u32)(req->req.dma + req->req.actual); + + trb->trb_hw->buf_addr_lo = cpu_to_le32(temp); + trb->trb_hw->buf_addr_hi = 0; + trb->trb_hw->trb_len = cpu_to_le32(*length); + trb->trb_hw->ctrl.own = 1; + + if (req->ep->ep_num == 0) + trb->trb_hw->ctrl.type = TYPE_DATA; + else + trb->trb_hw->ctrl.type = TYPE_NORMAL; + + req->req.actual += *length; + + direction = mv_u3d_ep_dir(req->ep); + if (direction == MV_U3D_EP_DIR_IN) + trb->trb_hw->ctrl.dir = 1; + else + trb->trb_hw->ctrl.dir = 0; + + /* zlp is needed if req->req.zero is set */ + if (req->req.zero) { + if (*length == 0 || (*length % req->ep->ep.maxpacket) != 0) + *is_last = 1; + else + *is_last = 0; + } else if (req->req.length == req->req.actual) + *is_last = 1; + else + *is_last = 0; + + /* Enable interrupt for the last trb of a request */ + if (*is_last && !req->req.no_interrupt) + trb->trb_hw->ctrl.ioc = 1; + + if (*is_last) + trb->trb_hw->ctrl.chain = 0; + else { + trb->trb_hw->ctrl.chain = 1; + dev_dbg(u3d->dev, "chain trb\n"); + } + + wmb(); + + return 0; +} + +/* generate TRB linked list for a request + * usb controller only supports continous trb chain, + * that trb structure physical address should be continous. + */ +static int mv_u3d_req_to_trb(struct mv_u3d_req *req) +{ + unsigned count; + int is_last; + struct mv_u3d_trb *trb; + struct mv_u3d_trb_hw *trb_hw; + struct mv_u3d *u3d; + dma_addr_t dma; + unsigned length; + unsigned trb_num; + + u3d = req->ep->u3d; + + INIT_LIST_HEAD(&req->trb_list); + + length = req->req.length - req->req.actual; + /* normally the request transfer length is less than 16KB. + * we use buil_trb_one() to optimize it. + */ + if (length <= (unsigned)MV_U3D_EP_MAX_LENGTH_TRANSFER) { + trb = mv_u3d_build_trb_one(req, &count, &dma); + list_add_tail(&trb->trb_list, &req->trb_list); + req->trb_head = trb; + req->trb_count = 1; + req->chain = 0; + } else { + trb_num = length / MV_U3D_EP_MAX_LENGTH_TRANSFER; + if (length % MV_U3D_EP_MAX_LENGTH_TRANSFER) + trb_num++; + + trb = kcalloc(trb_num, sizeof(*trb), GFP_ATOMIC); + if (!trb) { + dev_err(u3d->dev, + "%s, trb alloc fail\n", __func__); + return -ENOMEM; + } + + trb_hw = kcalloc(trb_num, sizeof(*trb_hw), GFP_ATOMIC); + if (!trb_hw) { + dev_err(u3d->dev, + "%s, trb_hw alloc fail\n", __func__); + return -ENOMEM; + } + + do { + trb->trb_hw = trb_hw; + if (mv_u3d_build_trb_chain(req, &count, + trb, &is_last)) { + dev_err(u3d->dev, + "%s, mv_u3d_build_trb_chain fail\n", + __func__); + return -EIO; + } + + list_add_tail(&trb->trb_list, &req->trb_list); + req->trb_count++; + trb++; + trb_hw++; + } while (!is_last); + + req->trb_head = list_entry(req->trb_list.next, + struct mv_u3d_trb, trb_list); + req->trb_head->trb_dma = dma_map_single(u3d->gadget.dev.parent, + req->trb_head->trb_hw, + trb_num * sizeof(*trb_hw), + DMA_BIDIRECTIONAL); + + req->chain = 1; + } + + return 0; +} + +static int +mv_u3d_start_queue(struct mv_u3d_ep *ep) +{ + struct mv_u3d *u3d = ep->u3d; + struct mv_u3d_req *req; + int ret; + + if (!list_empty(&ep->req_list) && !ep->processing) + req = list_entry(ep->req_list.next, struct mv_u3d_req, list); + else + return 0; + + ep->processing = 1; + + /* set up dma mapping */ + ret = usb_gadget_map_request(&u3d->gadget, &req->req, + mv_u3d_ep_dir(ep)); + if (ret) + return ret; + + req->req.status = -EINPROGRESS; + req->req.actual = 0; + req->trb_count = 0; + + /* build trbs and push them to device queue */ + if (!mv_u3d_req_to_trb(req)) { + ret = mv_u3d_queue_trb(ep, req); + if (ret) { + ep->processing = 0; + return ret; + } + } else { + ep->processing = 0; + dev_err(u3d->dev, "%s, mv_u3d_req_to_trb fail\n", __func__); + return -ENOMEM; + } + + /* irq handler advances the queue */ + if (req) + list_add_tail(&req->queue, &ep->queue); + + return 0; +} + +static int mv_u3d_ep_enable(struct usb_ep *_ep, + const struct usb_endpoint_descriptor *desc) +{ + struct mv_u3d *u3d; + struct mv_u3d_ep *ep; + struct mv_u3d_ep_context *ep_context; + u16 max = 0; + unsigned maxburst = 0; + u32 epxcr, direction; + + if (!_ep || !desc || desc->bDescriptorType != USB_DT_ENDPOINT) + return -EINVAL; + + ep = container_of(_ep, struct mv_u3d_ep, ep); + u3d = ep->u3d; + + if (!u3d->driver || u3d->gadget.speed == USB_SPEED_UNKNOWN) + return -ESHUTDOWN; + + direction = mv_u3d_ep_dir(ep); + max = le16_to_cpu(desc->wMaxPacketSize); + + if (!_ep->maxburst) + _ep->maxburst = 1; + maxburst = _ep->maxburst; + + /* Get the endpoint context address */ + ep_context = (struct mv_u3d_ep_context *)ep->ep_context; + + /* Set the max burst size */ + switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) { + case USB_ENDPOINT_XFER_BULK: + if (maxburst > 16) { + dev_dbg(u3d->dev, + "max burst should not be greater " + "than 16 on bulk ep\n"); + maxburst = 1; + _ep->maxburst = maxburst; + } + dev_dbg(u3d->dev, + "maxburst: %d on bulk %s\n", maxburst, ep->name); + break; + case USB_ENDPOINT_XFER_CONTROL: + /* control transfer only supports maxburst as one */ + maxburst = 1; + _ep->maxburst = maxburst; + break; + case USB_ENDPOINT_XFER_INT: + if (maxburst != 1) { + dev_dbg(u3d->dev, + "max burst should be 1 on int ep " + "if transfer size is not 1024\n"); + maxburst = 1; + _ep->maxburst = maxburst; + } + break; + case USB_ENDPOINT_XFER_ISOC: + if (maxburst != 1) { + dev_dbg(u3d->dev, + "max burst should be 1 on isoc ep " + "if transfer size is not 1024\n"); + maxburst = 1; + _ep->maxburst = maxburst; + } + break; + default: + goto en_done; + } + + ep->ep.maxpacket = max; + ep->ep.desc = desc; + ep->enabled = 1; + + /* Enable the endpoint for Rx or Tx and set the endpoint type */ + if (direction == MV_U3D_EP_DIR_OUT) { + epxcr = ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxoutcr0); + epxcr |= MV_U3D_EPXCR_EP_INIT; + iowrite32(epxcr, &u3d->vuc_regs->epcr[ep->ep_num].epxoutcr0); + udelay(5); + epxcr &= ~MV_U3D_EPXCR_EP_INIT; + iowrite32(epxcr, &u3d->vuc_regs->epcr[ep->ep_num].epxoutcr0); + + epxcr = ((max << MV_U3D_EPXCR_MAX_PACKET_SIZE_SHIFT) + | ((maxburst - 1) << MV_U3D_EPXCR_MAX_BURST_SIZE_SHIFT) + | (1 << MV_U3D_EPXCR_EP_ENABLE_SHIFT) + | (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)); + iowrite32(epxcr, &u3d->vuc_regs->epcr[ep->ep_num].epxoutcr1); + } else { + epxcr = ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxincr0); + epxcr |= MV_U3D_EPXCR_EP_INIT; + iowrite32(epxcr, &u3d->vuc_regs->epcr[ep->ep_num].epxincr0); + udelay(5); + epxcr &= ~MV_U3D_EPXCR_EP_INIT; + iowrite32(epxcr, &u3d->vuc_regs->epcr[ep->ep_num].epxincr0); + + epxcr = ((max << MV_U3D_EPXCR_MAX_PACKET_SIZE_SHIFT) + | ((maxburst - 1) << MV_U3D_EPXCR_MAX_BURST_SIZE_SHIFT) + | (1 << MV_U3D_EPXCR_EP_ENABLE_SHIFT) + | (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)); + iowrite32(epxcr, &u3d->vuc_regs->epcr[ep->ep_num].epxincr1); + } + + return 0; +en_done: + return -EINVAL; +} + +static int mv_u3d_ep_disable(struct usb_ep *_ep) +{ + struct mv_u3d *u3d; + struct mv_u3d_ep *ep; + struct mv_u3d_ep_context *ep_context; + u32 epxcr, direction; + + if (!_ep) + return -EINVAL; + + ep = container_of(_ep, struct mv_u3d_ep, ep); + if (!ep->ep.desc) + return -EINVAL; + + u3d = ep->u3d; + + /* Get the endpoint context address */ + ep_context = ep->ep_context; + + direction = mv_u3d_ep_dir(ep); + + /* nuke all pending requests (does flush) */ + mv_u3d_nuke(ep, -ESHUTDOWN); + + /* Disable the endpoint for Rx or Tx and reset the endpoint type */ + if (direction == MV_U3D_EP_DIR_OUT) { + epxcr = ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxoutcr1); + epxcr &= ~((1 << MV_U3D_EPXCR_EP_ENABLE_SHIFT) + | USB_ENDPOINT_XFERTYPE_MASK); + iowrite32(epxcr, &u3d->vuc_regs->epcr[ep->ep_num].epxoutcr1); + } else { + epxcr = ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxincr1); + epxcr &= ~((1 << MV_U3D_EPXCR_EP_ENABLE_SHIFT) + | USB_ENDPOINT_XFERTYPE_MASK); + iowrite32(epxcr, &u3d->vuc_regs->epcr[ep->ep_num].epxincr1); + } + + ep->enabled = 0; + + ep->ep.desc = NULL; + return 0; +} + +static struct usb_request * +mv_u3d_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags) +{ + struct mv_u3d_req *req = NULL; + + req = kzalloc(sizeof *req, gfp_flags); + if (!req) + return NULL; + + INIT_LIST_HEAD(&req->queue); + + return &req->req; +} + +static void mv_u3d_free_request(struct usb_ep *_ep, struct usb_request *_req) +{ + struct mv_u3d_req *req = container_of(_req, struct mv_u3d_req, req); + + kfree(req); +} + +static void mv_u3d_ep_fifo_flush(struct usb_ep *_ep) +{ + struct mv_u3d *u3d; + u32 direction; + struct mv_u3d_ep *ep = container_of(_ep, struct mv_u3d_ep, ep); + unsigned int loops; + u32 tmp; + + /* if endpoint is not enabled, cannot flush endpoint */ + if (!ep->enabled) + return; + + u3d = ep->u3d; + direction = mv_u3d_ep_dir(ep); + + /* ep0 need clear bit after flushing fifo. */ + if (!ep->ep_num) { + if (direction == MV_U3D_EP_DIR_OUT) { + tmp = ioread32(&u3d->vuc_regs->epcr[0].epxoutcr0); + tmp |= MV_U3D_EPXCR_EP_FLUSH; + iowrite32(tmp, &u3d->vuc_regs->epcr[0].epxoutcr0); + udelay(10); + tmp &= ~MV_U3D_EPXCR_EP_FLUSH; + iowrite32(tmp, &u3d->vuc_regs->epcr[0].epxoutcr0); + } else { + tmp = ioread32(&u3d->vuc_regs->epcr[0].epxincr0); + tmp |= MV_U3D_EPXCR_EP_FLUSH; + iowrite32(tmp, &u3d->vuc_regs->epcr[0].epxincr0); + udelay(10); + tmp &= ~MV_U3D_EPXCR_EP_FLUSH; + iowrite32(tmp, &u3d->vuc_regs->epcr[0].epxincr0); + } + return; + } + + if (direction == MV_U3D_EP_DIR_OUT) { + tmp = ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxoutcr0); + tmp |= MV_U3D_EPXCR_EP_FLUSH; + iowrite32(tmp, &u3d->vuc_regs->epcr[ep->ep_num].epxoutcr0); + + /* Wait until flushing completed */ + loops = LOOPS(MV_U3D_FLUSH_TIMEOUT); + while (ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxoutcr0) & + MV_U3D_EPXCR_EP_FLUSH) { + /* + * EP_FLUSH bit should be cleared to indicate this + * operation is complete + */ + if (loops == 0) { + dev_dbg(u3d->dev, + "EP FLUSH TIMEOUT for ep%d%s\n", ep->ep_num, + direction ? "in" : "out"); + return; + } + loops--; + udelay(LOOPS_USEC); + } + } else { /* EP_DIR_IN */ + tmp = ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxincr0); + tmp |= MV_U3D_EPXCR_EP_FLUSH; + iowrite32(tmp, &u3d->vuc_regs->epcr[ep->ep_num].epxincr0); + + /* Wait until flushing completed */ + loops = LOOPS(MV_U3D_FLUSH_TIMEOUT); + while (ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxincr0) & + MV_U3D_EPXCR_EP_FLUSH) { + /* + * EP_FLUSH bit should be cleared to indicate this + * operation is complete + */ + if (loops == 0) { + dev_dbg(u3d->dev, + "EP FLUSH TIMEOUT for ep%d%s\n", ep->ep_num, + direction ? "in" : "out"); + return; + } + loops--; + udelay(LOOPS_USEC); + } + } +} + +/* queues (submits) an I/O request to an endpoint */ +static int +mv_u3d_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) +{ + struct mv_u3d_ep *ep; + struct mv_u3d_req *req; + struct mv_u3d *u3d; + unsigned long flags; + int is_first_req = 0; + + if (unlikely(!_ep || !_req)) + return -EINVAL; + + ep = container_of(_ep, struct mv_u3d_ep, ep); + u3d = ep->u3d; + + req = container_of(_req, struct mv_u3d_req, req); + + if (!ep->ep_num + && u3d->ep0_state == MV_U3D_STATUS_STAGE + && !_req->length) { + dev_dbg(u3d->dev, "ep0 status stage\n"); + u3d->ep0_state = MV_U3D_WAIT_FOR_SETUP; + return 0; + } + + dev_dbg(u3d->dev, "%s: %s, req: 0x%x\n", + __func__, _ep->name, (u32)req); + + /* catch various bogus parameters */ + if (!req->req.complete || !req->req.buf + || !list_empty(&req->queue)) { + dev_err(u3d->dev, + "%s, bad params, _req: 0x%x," + "req->req.complete: 0x%x, req->req.buf: 0x%x," + "list_empty: 0x%x\n", + __func__, (u32)_req, + (u32)req->req.complete, (u32)req->req.buf, + (u32)list_empty(&req->queue)); + return -EINVAL; + } + if (unlikely(!ep->ep.desc)) { + dev_err(u3d->dev, "%s, bad ep\n", __func__); + return -EINVAL; + } + if (ep->ep.desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) { + if (req->req.length > ep->ep.maxpacket) + return -EMSGSIZE; + } + + if (!u3d->driver || u3d->gadget.speed == USB_SPEED_UNKNOWN) { + dev_err(u3d->dev, + "bad params of driver/speed\n"); + return -ESHUTDOWN; + } + + req->ep = ep; + + /* Software list handles usb request. */ + spin_lock_irqsave(&ep->req_lock, flags); + is_first_req = list_empty(&ep->req_list); + list_add_tail(&req->list, &ep->req_list); + spin_unlock_irqrestore(&ep->req_lock, flags); + if (!is_first_req) { + dev_dbg(u3d->dev, "list is not empty\n"); + return 0; + } + + dev_dbg(u3d->dev, "call mv_u3d_start_queue from usb_ep_queue\n"); + spin_lock_irqsave(&u3d->lock, flags); + mv_u3d_start_queue(ep); + spin_unlock_irqrestore(&u3d->lock, flags); + return 0; +} + +/* dequeues (cancels, unlinks) an I/O request from an endpoint */ +static int mv_u3d_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req) +{ + struct mv_u3d_ep *ep; + struct mv_u3d_req *req; + struct mv_u3d *u3d; + struct mv_u3d_ep_context *ep_context; + struct mv_u3d_req *next_req; + + unsigned long flags; + int ret = 0; + + if (!_ep || !_req) + return -EINVAL; + + ep = container_of(_ep, struct mv_u3d_ep, ep); + u3d = ep->u3d; + + spin_lock_irqsave(&ep->u3d->lock, flags); + + /* make sure it's actually queued on this endpoint */ + list_for_each_entry(req, &ep->queue, queue) { + if (&req->req == _req) + break; + } + if (&req->req != _req) { + ret = -EINVAL; + goto out; + } + + /* The request is in progress, or completed but not dequeued */ + if (ep->queue.next == &req->queue) { + _req->status = -ECONNRESET; + mv_u3d_ep_fifo_flush(_ep); + + /* The request isn't the last request in this ep queue */ + if (req->queue.next != &ep->queue) { + dev_dbg(u3d->dev, + "it is the last request in this ep queue\n"); + ep_context = ep->ep_context; + next_req = list_entry(req->queue.next, + struct mv_u3d_req, queue); + + /* Point first TRB of next request to the EP context. */ + iowrite32((u32) next_req->trb_head, + &ep_context->trb_addr_lo); + } else { + struct mv_u3d_ep_context *ep_context; + ep_context = ep->ep_context; + ep_context->trb_addr_lo = 0; + ep_context->trb_addr_hi = 0; + } + + } else + WARN_ON(1); + + mv_u3d_done(ep, req, -ECONNRESET); + + /* remove the req from the ep req list */ + if (!list_empty(&ep->req_list)) { + struct mv_u3d_req *curr_req; + curr_req = list_entry(ep->req_list.next, + struct mv_u3d_req, list); + if (curr_req == req) { + list_del_init(&req->list); + ep->processing = 0; + } + } + +out: + spin_unlock_irqrestore(&ep->u3d->lock, flags); + return ret; +} + +static void +mv_u3d_ep_set_stall(struct mv_u3d *u3d, u8 ep_num, u8 direction, int stall) +{ + u32 tmp; + struct mv_u3d_ep *ep = u3d->eps; + + dev_dbg(u3d->dev, "%s\n", __func__); + if (direction == MV_U3D_EP_DIR_OUT) { + tmp = ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxoutcr0); + if (stall) + tmp |= MV_U3D_EPXCR_EP_HALT; + else + tmp &= ~MV_U3D_EPXCR_EP_HALT; + iowrite32(tmp, &u3d->vuc_regs->epcr[ep->ep_num].epxoutcr0); + } else { + tmp = ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxincr0); + if (stall) + tmp |= MV_U3D_EPXCR_EP_HALT; + else + tmp &= ~MV_U3D_EPXCR_EP_HALT; + iowrite32(tmp, &u3d->vuc_regs->epcr[ep->ep_num].epxincr0); + } +} + +static int mv_u3d_ep_set_halt_wedge(struct usb_ep *_ep, int halt, int wedge) +{ + struct mv_u3d_ep *ep; + unsigned long flags = 0; + int status = 0; + struct mv_u3d *u3d; + + ep = container_of(_ep, struct mv_u3d_ep, ep); + u3d = ep->u3d; + if (!ep->ep.desc) { + status = -EINVAL; + goto out; + } + + if (ep->ep.desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) { + status = -EOPNOTSUPP; + goto out; + } + + /* + * Attempt to halt IN ep will fail if any transfer requests + * are still queue + */ + if (halt && (mv_u3d_ep_dir(ep) == MV_U3D_EP_DIR_IN) + && !list_empty(&ep->queue)) { + status = -EAGAIN; + goto out; + } + + spin_lock_irqsave(&ep->u3d->lock, flags); + mv_u3d_ep_set_stall(u3d, ep->ep_num, mv_u3d_ep_dir(ep), halt); + if (halt && wedge) + ep->wedge = 1; + else if (!halt) + ep->wedge = 0; + spin_unlock_irqrestore(&ep->u3d->lock, flags); + + if (ep->ep_num == 0) + u3d->ep0_dir = MV_U3D_EP_DIR_OUT; +out: + return status; +} + +static int mv_u3d_ep_set_halt(struct usb_ep *_ep, int halt) +{ + return mv_u3d_ep_set_halt_wedge(_ep, halt, 0); +} + +static int mv_u3d_ep_set_wedge(struct usb_ep *_ep) +{ + return mv_u3d_ep_set_halt_wedge(_ep, 1, 1); +} + +static struct usb_ep_ops mv_u3d_ep_ops = { + .enable = mv_u3d_ep_enable, + .disable = mv_u3d_ep_disable, + + .alloc_request = mv_u3d_alloc_request, + .free_request = mv_u3d_free_request, + + .queue = mv_u3d_ep_queue, + .dequeue = mv_u3d_ep_dequeue, + + .set_wedge = mv_u3d_ep_set_wedge, + .set_halt = mv_u3d_ep_set_halt, + .fifo_flush = mv_u3d_ep_fifo_flush, +}; + +static void mv_u3d_controller_stop(struct mv_u3d *u3d) +{ + u32 tmp; + + if (!u3d->clock_gating && u3d->vbus_valid_detect) + iowrite32(MV_U3D_INTR_ENABLE_VBUS_VALID, + &u3d->vuc_regs->intrenable); + else + iowrite32(0, &u3d->vuc_regs->intrenable); + iowrite32(~0x0, &u3d->vuc_regs->endcomplete); + iowrite32(~0x0, &u3d->vuc_regs->trbunderrun); + iowrite32(~0x0, &u3d->vuc_regs->trbcomplete); + iowrite32(~0x0, &u3d->vuc_regs->linkchange); + iowrite32(0x1, &u3d->vuc_regs->setuplock); + + /* Reset the RUN bit in the command register to stop USB */ + tmp = ioread32(&u3d->op_regs->usbcmd); + tmp &= ~MV_U3D_CMD_RUN_STOP; + iowrite32(tmp, &u3d->op_regs->usbcmd); + dev_dbg(u3d->dev, "after u3d_stop, USBCMD 0x%x\n", + ioread32(&u3d->op_regs->usbcmd)); +} + +static void mv_u3d_controller_start(struct mv_u3d *u3d) +{ + u32 usbintr; + u32 temp; + + /* enable link LTSSM state machine */ + temp = ioread32(&u3d->vuc_regs->ltssm); + temp |= MV_U3D_LTSSM_PHY_INIT_DONE; + iowrite32(temp, &u3d->vuc_regs->ltssm); + + /* Enable interrupts */ + usbintr = MV_U3D_INTR_ENABLE_LINK_CHG | MV_U3D_INTR_ENABLE_TXDESC_ERR | + MV_U3D_INTR_ENABLE_RXDESC_ERR | MV_U3D_INTR_ENABLE_TX_COMPLETE | + MV_U3D_INTR_ENABLE_RX_COMPLETE | MV_U3D_INTR_ENABLE_SETUP | + (u3d->vbus_valid_detect ? MV_U3D_INTR_ENABLE_VBUS_VALID : 0); + iowrite32(usbintr, &u3d->vuc_regs->intrenable); + + /* Enable ctrl ep */ + iowrite32(0x1, &u3d->vuc_regs->ctrlepenable); + + /* Set the Run bit in the command register */ + iowrite32(MV_U3D_CMD_RUN_STOP, &u3d->op_regs->usbcmd); + dev_dbg(u3d->dev, "after u3d_start, USBCMD 0x%x\n", + ioread32(&u3d->op_regs->usbcmd)); +} + +static int mv_u3d_controller_reset(struct mv_u3d *u3d) +{ + unsigned int loops; + u32 tmp; + + /* Stop the controller */ + tmp = ioread32(&u3d->op_regs->usbcmd); + tmp &= ~MV_U3D_CMD_RUN_STOP; + iowrite32(tmp, &u3d->op_regs->usbcmd); + + /* Reset the controller to get default values */ + iowrite32(MV_U3D_CMD_CTRL_RESET, &u3d->op_regs->usbcmd); + + /* wait for reset to complete */ + loops = LOOPS(MV_U3D_RESET_TIMEOUT); + while (ioread32(&u3d->op_regs->usbcmd) & MV_U3D_CMD_CTRL_RESET) { + if (loops == 0) { + dev_err(u3d->dev, + "Wait for RESET completed TIMEOUT\n"); + return -ETIMEDOUT; + } + loops--; + udelay(LOOPS_USEC); + } + + /* Configure the Endpoint Context Address */ + iowrite32(u3d->ep_context_dma, &u3d->op_regs->dcbaapl); + iowrite32(0, &u3d->op_regs->dcbaaph); + + return 0; +} + +static int mv_u3d_enable(struct mv_u3d *u3d) +{ + struct mv_usb_platform_data *pdata = u3d->dev->platform_data; + int retval; + + if (u3d->active) + return 0; + + if (!u3d->clock_gating) { + u3d->active = 1; + return 0; + } + + dev_dbg(u3d->dev, "enable u3d\n"); + clk_enable(u3d->clk); + if (pdata->phy_init) { + retval = pdata->phy_init(u3d->phy_regs); + if (retval) { + dev_err(u3d->dev, + "init phy error %d\n", retval); + clk_disable(u3d->clk); + return retval; + } + } + u3d->active = 1; + + return 0; +} + +static void mv_u3d_disable(struct mv_u3d *u3d) +{ + struct mv_usb_platform_data *pdata = u3d->dev->platform_data; + if (u3d->clock_gating && u3d->active) { + dev_dbg(u3d->dev, "disable u3d\n"); + if (pdata->phy_deinit) + pdata->phy_deinit(u3d->phy_regs); + clk_disable(u3d->clk); + u3d->active = 0; + } +} + +static int mv_u3d_vbus_session(struct usb_gadget *gadget, int is_active) +{ + struct mv_u3d *u3d; + unsigned long flags; + int retval = 0; + + u3d = container_of(gadget, struct mv_u3d, gadget); + + spin_lock_irqsave(&u3d->lock, flags); + + u3d->vbus_active = (is_active != 0); + dev_dbg(u3d->dev, "%s: softconnect %d, vbus_active %d\n", + __func__, u3d->softconnect, u3d->vbus_active); + /* + * 1. external VBUS detect: we can disable/enable clock on demand. + * 2. UDC VBUS detect: we have to enable clock all the time. + * 3. No VBUS detect: we have to enable clock all the time. + */ + if (u3d->driver && u3d->softconnect && u3d->vbus_active) { + retval = mv_u3d_enable(u3d); + if (retval == 0) { + /* + * after clock is disabled, we lost all the register + * context. We have to re-init registers + */ + mv_u3d_controller_reset(u3d); + mv_u3d_ep0_reset(u3d); + mv_u3d_controller_start(u3d); + } + } else if (u3d->driver && u3d->softconnect) { + if (!u3d->active) + goto out; + + /* stop all the transfer in queue*/ + mv_u3d_stop_activity(u3d, u3d->driver); + mv_u3d_controller_stop(u3d); + mv_u3d_disable(u3d); + } + +out: + spin_unlock_irqrestore(&u3d->lock, flags); + return retval; +} + +/* constrain controller's VBUS power usage + * This call is used by gadget drivers during SET_CONFIGURATION calls, + * reporting how much power the device may consume. For example, this + * could affect how quickly batteries are recharged. + * + * Returns zero on success, else negative errno. + */ +static int mv_u3d_vbus_draw(struct usb_gadget *gadget, unsigned mA) +{ + struct mv_u3d *u3d = container_of(gadget, struct mv_u3d, gadget); + + u3d->power = mA; + + return 0; +} + +static int mv_u3d_pullup(struct usb_gadget *gadget, int is_on) +{ + struct mv_u3d *u3d = container_of(gadget, struct mv_u3d, gadget); + unsigned long flags; + int retval = 0; + + spin_lock_irqsave(&u3d->lock, flags); + + dev_dbg(u3d->dev, "%s: softconnect %d, vbus_active %d\n", + __func__, u3d->softconnect, u3d->vbus_active); + u3d->softconnect = (is_on != 0); + if (u3d->driver && u3d->softconnect && u3d->vbus_active) { + retval = mv_u3d_enable(u3d); + if (retval == 0) { + /* + * after clock is disabled, we lost all the register + * context. We have to re-init registers + */ + mv_u3d_controller_reset(u3d); + mv_u3d_ep0_reset(u3d); + mv_u3d_controller_start(u3d); + } + } else if (u3d->driver && u3d->vbus_active) { + /* stop all the transfer in queue*/ + mv_u3d_stop_activity(u3d, u3d->driver); + mv_u3d_controller_stop(u3d); + mv_u3d_disable(u3d); + } + + spin_unlock_irqrestore(&u3d->lock, flags); + + return retval; +} + +static int mv_u3d_start(struct usb_gadget *g, + struct usb_gadget_driver *driver) +{ + struct mv_u3d *u3d = container_of(g, struct mv_u3d, gadget); + struct mv_usb_platform_data *pdata = u3d->dev->platform_data; + unsigned long flags; + + if (u3d->driver) + return -EBUSY; + + spin_lock_irqsave(&u3d->lock, flags); + + if (!u3d->clock_gating) { + clk_enable(u3d->clk); + if (pdata->phy_init) + pdata->phy_init(u3d->phy_regs); + } + + /* hook up the driver ... */ + driver->driver.bus = NULL; + u3d->driver = driver; + u3d->gadget.dev.driver = &driver->driver; + + u3d->ep0_dir = USB_DIR_OUT; + + spin_unlock_irqrestore(&u3d->lock, flags); + + u3d->vbus_valid_detect = 1; + + return 0; +} + +static int mv_u3d_stop(struct usb_gadget *g, + struct usb_gadget_driver *driver) +{ + struct mv_u3d *u3d = container_of(g, struct mv_u3d, gadget); + struct mv_usb_platform_data *pdata = u3d->dev->platform_data; + unsigned long flags; + + u3d->vbus_valid_detect = 0; + spin_lock_irqsave(&u3d->lock, flags); + + /* enable clock to access controller register */ + clk_enable(u3d->clk); + if (pdata->phy_init) + pdata->phy_init(u3d->phy_regs); + + mv_u3d_controller_stop(u3d); + /* stop all usb activities */ + u3d->gadget.speed = USB_SPEED_UNKNOWN; + mv_u3d_stop_activity(u3d, driver); + mv_u3d_disable(u3d); + + if (pdata->phy_deinit) + pdata->phy_deinit(u3d->phy_regs); + clk_disable(u3d->clk); + + spin_unlock_irqrestore(&u3d->lock, flags); + + u3d->gadget.dev.driver = NULL; + u3d->driver = NULL; + + return 0; +} + +/* device controller usb_gadget_ops structure */ +static const struct usb_gadget_ops mv_u3d_ops = { + /* notify controller that VBUS is powered or not */ + .vbus_session = mv_u3d_vbus_session, + + /* constrain controller's VBUS power usage */ + .vbus_draw = mv_u3d_vbus_draw, + + .pullup = mv_u3d_pullup, + .udc_start = mv_u3d_start, + .udc_stop = mv_u3d_stop, +}; + +static int mv_u3d_eps_init(struct mv_u3d *u3d) +{ + struct mv_u3d_ep *ep; + char name[14]; + int i; + + /* initialize ep0, ep0 in/out use eps[1] */ + ep = &u3d->eps[1]; + ep->u3d = u3d; + strncpy(ep->name, "ep0", sizeof(ep->name)); + ep->ep.name = ep->name; + ep->ep.ops = &mv_u3d_ep_ops; + ep->wedge = 0; + ep->ep.maxpacket = MV_U3D_EP0_MAX_PKT_SIZE; + ep->ep_num = 0; + ep->ep.desc = &mv_u3d_ep0_desc; + INIT_LIST_HEAD(&ep->queue); + INIT_LIST_HEAD(&ep->req_list); + ep->ep_type = USB_ENDPOINT_XFER_CONTROL; + + /* add ep0 ep_context */ + ep->ep_context = &u3d->ep_context[1]; + + /* initialize other endpoints */ + for (i = 2; i < u3d->max_eps * 2; i++) { + ep = &u3d->eps[i]; + if (i & 1) { + snprintf(name, sizeof(name), "ep%din", i >> 1); + ep->direction = MV_U3D_EP_DIR_IN; + } else { + snprintf(name, sizeof(name), "ep%dout", i >> 1); + ep->direction = MV_U3D_EP_DIR_OUT; + } + ep->u3d = u3d; + strncpy(ep->name, name, sizeof(ep->name)); + ep->ep.name = ep->name; + + ep->ep.ops = &mv_u3d_ep_ops; + ep->ep.maxpacket = (unsigned short) ~0; + ep->ep_num = i / 2; + + INIT_LIST_HEAD(&ep->queue); + list_add_tail(&ep->ep.ep_list, &u3d->gadget.ep_list); + + INIT_LIST_HEAD(&ep->req_list); + spin_lock_init(&ep->req_lock); + ep->ep_context = &u3d->ep_context[i]; + } + + return 0; +} + +/* delete all endpoint requests, called with spinlock held */ +static void mv_u3d_nuke(struct mv_u3d_ep *ep, int status) +{ + /* endpoint fifo flush */ + mv_u3d_ep_fifo_flush(&ep->ep); + + while (!list_empty(&ep->queue)) { + struct mv_u3d_req *req = NULL; + req = list_entry(ep->queue.next, struct mv_u3d_req, queue); + mv_u3d_done(ep, req, status); + } +} + +/* stop all USB activities */ +static +void mv_u3d_stop_activity(struct mv_u3d *u3d, struct usb_gadget_driver *driver) +{ + struct mv_u3d_ep *ep; + + mv_u3d_nuke(&u3d->eps[1], -ESHUTDOWN); + + list_for_each_entry(ep, &u3d->gadget.ep_list, ep.ep_list) { + mv_u3d_nuke(ep, -ESHUTDOWN); + } + + /* report disconnect; the driver is already quiesced */ + if (driver) { + spin_unlock(&u3d->lock); + driver->disconnect(&u3d->gadget); + spin_lock(&u3d->lock); + } +} + +static void mv_u3d_irq_process_error(struct mv_u3d *u3d) +{ + /* Increment the error count */ + u3d->errors++; + dev_err(u3d->dev, "%s\n", __func__); +} + +static void mv_u3d_irq_process_link_change(struct mv_u3d *u3d) +{ + u32 linkchange; + + linkchange = ioread32(&u3d->vuc_regs->linkchange); + iowrite32(linkchange, &u3d->vuc_regs->linkchange); + + dev_dbg(u3d->dev, "linkchange: 0x%x\n", linkchange); + + if (linkchange & MV_U3D_LINK_CHANGE_LINK_UP) { + dev_dbg(u3d->dev, "link up: ltssm state: 0x%x\n", + ioread32(&u3d->vuc_regs->ltssmstate)); + + u3d->usb_state = USB_STATE_DEFAULT; + u3d->ep0_dir = MV_U3D_EP_DIR_OUT; + u3d->ep0_state = MV_U3D_WAIT_FOR_SETUP; + + /* set speed */ + u3d->gadget.speed = USB_SPEED_SUPER; + } + + if (linkchange & MV_U3D_LINK_CHANGE_SUSPEND) { + dev_dbg(u3d->dev, "link suspend\n"); + u3d->resume_state = u3d->usb_state; + u3d->usb_state = USB_STATE_SUSPENDED; + } + + if (linkchange & MV_U3D_LINK_CHANGE_RESUME) { + dev_dbg(u3d->dev, "link resume\n"); + u3d->usb_state = u3d->resume_state; + u3d->resume_state = 0; + } + + if (linkchange & MV_U3D_LINK_CHANGE_WRESET) { + dev_dbg(u3d->dev, "warm reset\n"); + u3d->usb_state = USB_STATE_POWERED; + } + + if (linkchange & MV_U3D_LINK_CHANGE_HRESET) { + dev_dbg(u3d->dev, "hot reset\n"); + u3d->usb_state = USB_STATE_DEFAULT; + } + + if (linkchange & MV_U3D_LINK_CHANGE_INACT) + dev_dbg(u3d->dev, "inactive\n"); + + if (linkchange & MV_U3D_LINK_CHANGE_DISABLE_AFTER_U0) + dev_dbg(u3d->dev, "ss.disabled\n"); + + if (linkchange & MV_U3D_LINK_CHANGE_VBUS_INVALID) { + dev_dbg(u3d->dev, "vbus invalid\n"); + u3d->usb_state = USB_STATE_ATTACHED; + u3d->vbus_valid_detect = 1; + /* if external vbus detect is not supported, + * we handle it here. + */ + if (!u3d->vbus) { + spin_unlock(&u3d->lock); + mv_u3d_vbus_session(&u3d->gadget, 0); + spin_lock(&u3d->lock); + } + } +} + +static void mv_u3d_ch9setaddress(struct mv_u3d *u3d, + struct usb_ctrlrequest *setup) +{ + u32 tmp; + + if (u3d->usb_state != USB_STATE_DEFAULT) { + dev_err(u3d->dev, + "%s, cannot setaddr in this state (%d)\n", + __func__, u3d->usb_state); + goto err; + } + + u3d->dev_addr = (u8)setup->wValue; + + dev_dbg(u3d->dev, "%s: 0x%x\n", __func__, u3d->dev_addr); + + if (u3d->dev_addr > 127) { + dev_err(u3d->dev, + "%s, u3d address is wrong (out of range)\n", __func__); + u3d->dev_addr = 0; + goto err; + } + + /* update usb state */ + u3d->usb_state = USB_STATE_ADDRESS; + + /* set the new address */ + tmp = ioread32(&u3d->vuc_regs->devaddrtiebrkr); + tmp &= ~0x7F; + tmp |= (u32)u3d->dev_addr; + iowrite32(tmp, &u3d->vuc_regs->devaddrtiebrkr); + + return; +err: + mv_u3d_ep0_stall(u3d); +} + +static int mv_u3d_is_set_configuration(struct usb_ctrlrequest *setup) +{ + if ((setup->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) + if (setup->bRequest == USB_REQ_SET_CONFIGURATION) + return 1; + + return 0; +} + +static void mv_u3d_handle_setup_packet(struct mv_u3d *u3d, u8 ep_num, + struct usb_ctrlrequest *setup) +{ + bool delegate = false; + + mv_u3d_nuke(&u3d->eps[ep_num * 2 + MV_U3D_EP_DIR_IN], -ESHUTDOWN); + + dev_dbg(u3d->dev, "SETUP %02x.%02x v%04x i%04x l%04x\n", + setup->bRequestType, setup->bRequest, + setup->wValue, setup->wIndex, setup->wLength); + + /* We process some stardard setup requests here */ + if ((setup->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) { + switch (setup->bRequest) { + case USB_REQ_GET_STATUS: + delegate = true; + break; + + case USB_REQ_SET_ADDRESS: + mv_u3d_ch9setaddress(u3d, setup); + break; + + case USB_REQ_CLEAR_FEATURE: + delegate = true; + break; + + case USB_REQ_SET_FEATURE: + delegate = true; + break; + + default: + delegate = true; + } + } else + delegate = true; + + /* delegate USB standard requests to the gadget driver */ + if (delegate == true) { + /* USB requests handled by gadget */ + if (setup->wLength) { + /* DATA phase from gadget, STATUS phase from u3d */ + u3d->ep0_dir = (setup->bRequestType & USB_DIR_IN) + ? MV_U3D_EP_DIR_IN : MV_U3D_EP_DIR_OUT; + spin_unlock(&u3d->lock); + if (u3d->driver->setup(&u3d->gadget, + &u3d->local_setup_buff) < 0) { + dev_err(u3d->dev, "setup error!\n"); + mv_u3d_ep0_stall(u3d); + } + spin_lock(&u3d->lock); + } else { + /* no DATA phase, STATUS phase from gadget */ + u3d->ep0_dir = MV_U3D_EP_DIR_IN; + u3d->ep0_state = MV_U3D_STATUS_STAGE; + spin_unlock(&u3d->lock); + if (u3d->driver->setup(&u3d->gadget, + &u3d->local_setup_buff) < 0) + mv_u3d_ep0_stall(u3d); + spin_lock(&u3d->lock); + } + + if (mv_u3d_is_set_configuration(setup)) { + dev_dbg(u3d->dev, "u3d configured\n"); + u3d->usb_state = USB_STATE_CONFIGURED; + } + } +} + +static void mv_u3d_get_setup_data(struct mv_u3d *u3d, u8 ep_num, u8 *buffer_ptr) +{ + struct mv_u3d_ep_context *epcontext; + + epcontext = &u3d->ep_context[ep_num * 2 + MV_U3D_EP_DIR_IN]; + + /* Copy the setup packet to local buffer */ + memcpy(buffer_ptr, (u8 *) &epcontext->setup_buffer, 8); +} + +static void mv_u3d_irq_process_setup(struct mv_u3d *u3d) +{ + u32 tmp, i; + /* Process all Setup packet received interrupts */ + tmp = ioread32(&u3d->vuc_regs->setuplock); + if (tmp) { + for (i = 0; i < u3d->max_eps; i++) { + if (tmp & (1 << i)) { + mv_u3d_get_setup_data(u3d, i, + (u8 *)(&u3d->local_setup_buff)); + mv_u3d_handle_setup_packet(u3d, i, + &u3d->local_setup_buff); + } + } + } + + iowrite32(tmp, &u3d->vuc_regs->setuplock); +} + +static void mv_u3d_irq_process_tr_complete(struct mv_u3d *u3d) +{ + u32 tmp, bit_pos; + int i, ep_num = 0, direction = 0; + struct mv_u3d_ep *curr_ep; + struct mv_u3d_req *curr_req, *temp_req; + int status; + + tmp = ioread32(&u3d->vuc_regs->endcomplete); + + dev_dbg(u3d->dev, "tr_complete: ep: 0x%x\n", tmp); + if (!tmp) + return; + iowrite32(tmp, &u3d->vuc_regs->endcomplete); + + for (i = 0; i < u3d->max_eps * 2; i++) { + ep_num = i >> 1; + direction = i % 2; + + bit_pos = 1 << (ep_num + 16 * direction); + + if (!(bit_pos & tmp)) + continue; + + if (i == 0) + curr_ep = &u3d->eps[1]; + else + curr_ep = &u3d->eps[i]; + + /* remove req out of ep request list after completion */ + dev_dbg(u3d->dev, "tr comp: check req_list\n"); + spin_lock(&curr_ep->req_lock); + if (!list_empty(&curr_ep->req_list)) { + struct mv_u3d_req *req; + req = list_entry(curr_ep->req_list.next, + struct mv_u3d_req, list); + list_del_init(&req->list); + curr_ep->processing = 0; + } + spin_unlock(&curr_ep->req_lock); + + /* process the req queue until an uncomplete request */ + list_for_each_entry_safe(curr_req, temp_req, + &curr_ep->queue, queue) { + status = mv_u3d_process_ep_req(u3d, i, curr_req); + if (status) + break; + /* write back status to req */ + curr_req->req.status = status; + + /* ep0 request completion */ + if (ep_num == 0) { + mv_u3d_done(curr_ep, curr_req, 0); + break; + } else { + mv_u3d_done(curr_ep, curr_req, status); + } + } + + dev_dbg(u3d->dev, "call mv_u3d_start_queue from ep complete\n"); + mv_u3d_start_queue(curr_ep); + } +} + +static irqreturn_t mv_u3d_irq(int irq, void *dev) +{ + struct mv_u3d *u3d = (struct mv_u3d *)dev; + u32 status, intr; + u32 bridgesetting; + u32 trbunderrun; + + spin_lock(&u3d->lock); + + status = ioread32(&u3d->vuc_regs->intrcause); + intr = ioread32(&u3d->vuc_regs->intrenable); + status &= intr; + + if (status == 0) { + spin_unlock(&u3d->lock); + dev_err(u3d->dev, "irq error!\n"); + return IRQ_NONE; + } + + if (status & MV_U3D_USBINT_VBUS_VALID) { + bridgesetting = ioread32(&u3d->vuc_regs->bridgesetting); + if (bridgesetting & MV_U3D_BRIDGE_SETTING_VBUS_VALID) { + /* write vbus valid bit of bridge setting to clear */ + bridgesetting = MV_U3D_BRIDGE_SETTING_VBUS_VALID; + iowrite32(bridgesetting, &u3d->vuc_regs->bridgesetting); + dev_dbg(u3d->dev, "vbus valid\n"); + + u3d->usb_state = USB_STATE_POWERED; + u3d->vbus_valid_detect = 0; + /* if external vbus detect is not supported, + * we handle it here. + */ + if (!u3d->vbus) { + spin_unlock(&u3d->lock); + mv_u3d_vbus_session(&u3d->gadget, 1); + spin_lock(&u3d->lock); + } + } else + dev_err(u3d->dev, "vbus bit is not set\n"); + } + + /* RX data is already in the 16KB FIFO.*/ + if (status & MV_U3D_USBINT_UNDER_RUN) { + trbunderrun = ioread32(&u3d->vuc_regs->trbunderrun); + dev_err(u3d->dev, "under run, ep%d\n", trbunderrun); + iowrite32(trbunderrun, &u3d->vuc_regs->trbunderrun); + mv_u3d_irq_process_error(u3d); + } + + if (status & (MV_U3D_USBINT_RXDESC_ERR | MV_U3D_USBINT_TXDESC_ERR)) { + /* write one to clear */ + iowrite32(status & (MV_U3D_USBINT_RXDESC_ERR + | MV_U3D_USBINT_TXDESC_ERR), + &u3d->vuc_regs->intrcause); + dev_err(u3d->dev, "desc err 0x%x\n", status); + mv_u3d_irq_process_error(u3d); + } + + if (status & MV_U3D_USBINT_LINK_CHG) + mv_u3d_irq_process_link_change(u3d); + + if (status & MV_U3D_USBINT_TX_COMPLETE) + mv_u3d_irq_process_tr_complete(u3d); + + if (status & MV_U3D_USBINT_RX_COMPLETE) + mv_u3d_irq_process_tr_complete(u3d); + + if (status & MV_U3D_USBINT_SETUP) + mv_u3d_irq_process_setup(u3d); + + spin_unlock(&u3d->lock); + return IRQ_HANDLED; +} + +static void mv_u3d_gadget_release(struct device *dev) +{ + dev_dbg(dev, "%s\n", __func__); +} + +static __devexit int mv_u3d_remove(struct platform_device *dev) +{ + struct mv_u3d *u3d = platform_get_drvdata(dev); + + BUG_ON(u3d == NULL); + + usb_del_gadget_udc(&u3d->gadget); + + /* free memory allocated in probe */ + if (u3d->trb_pool) + dma_pool_destroy(u3d->trb_pool); + + if (u3d->ep_context) + dma_free_coherent(&dev->dev, u3d->ep_context_size, + u3d->ep_context, u3d->ep_context_dma); + + kfree(u3d->eps); + + if (u3d->irq) + free_irq(u3d->irq, &dev->dev); + + if (u3d->cap_regs) + iounmap(u3d->cap_regs); + u3d->cap_regs = NULL; + + kfree(u3d->status_req); + + clk_put(u3d->clk); + + device_unregister(&u3d->gadget.dev); + + platform_set_drvdata(dev, NULL); + + kfree(u3d); + + return 0; +} + +static int mv_u3d_probe(struct platform_device *dev) +{ + struct mv_u3d *u3d = NULL; + struct mv_usb_platform_data *pdata = dev->dev.platform_data; + int retval = 0; + struct resource *r; + size_t size; + + if (!dev->dev.platform_data) { + dev_err(&dev->dev, "missing platform_data\n"); + retval = -ENODEV; + goto err_pdata; + } + + u3d = kzalloc(sizeof(*u3d), GFP_KERNEL); + if (!u3d) { + dev_err(&dev->dev, "failed to allocate memory for u3d\n"); + retval = -ENOMEM; + goto err_alloc_private; + } + + spin_lock_init(&u3d->lock); + + platform_set_drvdata(dev, u3d); + + u3d->dev = &dev->dev; + u3d->vbus = pdata->vbus; + + u3d->clk = clk_get(&dev->dev, pdata->clkname[0]); + if (IS_ERR(u3d->clk)) { + retval = PTR_ERR(u3d->clk); + goto err_get_clk; + } + + r = platform_get_resource_byname(dev, IORESOURCE_MEM, "capregs"); + if (!r) { + dev_err(&dev->dev, "no I/O memory resource defined\n"); + retval = -ENODEV; + goto err_get_cap_regs; + } + + u3d->cap_regs = (struct mv_u3d_cap_regs __iomem *) + ioremap(r->start, resource_size(r)); + if (!u3d->cap_regs) { + dev_err(&dev->dev, "failed to map I/O memory\n"); + retval = -EBUSY; + goto err_map_cap_regs; + } else { + dev_dbg(&dev->dev, "cap_regs address: 0x%x/0x%x\n", + (unsigned int)r->start, (unsigned int)u3d->cap_regs); + } + + /* we will access controller register, so enable the u3d controller */ + clk_enable(u3d->clk); + + if (pdata->phy_init) { + retval = pdata->phy_init(u3d->phy_regs); + if (retval) { + dev_err(&dev->dev, "init phy error %d\n", retval); + goto err_u3d_enable; + } + } + + u3d->op_regs = (struct mv_u3d_op_regs __iomem *)((u32)u3d->cap_regs + + MV_U3D_USB3_OP_REGS_OFFSET); + + u3d->vuc_regs = (struct mv_u3d_vuc_regs __iomem *)((u32)u3d->cap_regs + + ioread32(&u3d->cap_regs->vuoff)); + + u3d->max_eps = 16; + + /* + * some platform will use usb to download image, it may not disconnect + * usb gadget before loading kernel. So first stop u3d here. + */ + mv_u3d_controller_stop(u3d); + iowrite32(0xFFFFFFFF, &u3d->vuc_regs->intrcause); + + if (pdata->phy_deinit) + pdata->phy_deinit(u3d->phy_regs); + clk_disable(u3d->clk); + + size = u3d->max_eps * sizeof(struct mv_u3d_ep_context) * 2; + size = (size + MV_U3D_EP_CONTEXT_ALIGNMENT - 1) + & ~(MV_U3D_EP_CONTEXT_ALIGNMENT - 1); + u3d->ep_context = dma_alloc_coherent(&dev->dev, size, + &u3d->ep_context_dma, GFP_KERNEL); + if (!u3d->ep_context) { + dev_err(&dev->dev, "allocate ep context memory failed\n"); + retval = -ENOMEM; + goto err_alloc_ep_context; + } + u3d->ep_context_size = size; + + /* create TRB dma_pool resource */ + u3d->trb_pool = dma_pool_create("u3d_trb", + &dev->dev, + sizeof(struct mv_u3d_trb_hw), + MV_U3D_TRB_ALIGNMENT, + MV_U3D_DMA_BOUNDARY); + + if (!u3d->trb_pool) { + retval = -ENOMEM; + goto err_alloc_trb_pool; + } + + size = u3d->max_eps * sizeof(struct mv_u3d_ep) * 2; + u3d->eps = kzalloc(size, GFP_KERNEL); + if (!u3d->eps) { + dev_err(&dev->dev, "allocate ep memory failed\n"); + retval = -ENOMEM; + goto err_alloc_eps; + } + + /* initialize ep0 status request structure */ + u3d->status_req = kzalloc(sizeof(struct mv_u3d_req) + 8, GFP_KERNEL); + if (!u3d->status_req) { + dev_err(&dev->dev, "allocate status_req memory failed\n"); + retval = -ENOMEM; + goto err_alloc_status_req; + } + INIT_LIST_HEAD(&u3d->status_req->queue); + + /* allocate a small amount of memory to get valid address */ + u3d->status_req->req.buf = (char *)u3d->status_req + + sizeof(struct mv_u3d_req); + u3d->status_req->req.dma = virt_to_phys(u3d->status_req->req.buf); + + u3d->resume_state = USB_STATE_NOTATTACHED; + u3d->usb_state = USB_STATE_ATTACHED; + u3d->ep0_dir = MV_U3D_EP_DIR_OUT; + u3d->remote_wakeup = 0; + + r = platform_get_resource(dev, IORESOURCE_IRQ, 0); + if (!r) { + dev_err(&dev->dev, "no IRQ resource defined\n"); + retval = -ENODEV; + goto err_get_irq; + } + u3d->irq = r->start; + if (request_irq(u3d->irq, mv_u3d_irq, + IRQF_DISABLED | IRQF_SHARED, driver_name, u3d)) { + u3d->irq = 0; + dev_err(&dev->dev, "Request irq %d for u3d failed\n", + u3d->irq); + retval = -ENODEV; + goto err_request_irq; + } + + /* initialize gadget structure */ + u3d->gadget.ops = &mv_u3d_ops; /* usb_gadget_ops */ + u3d->gadget.ep0 = &u3d->eps[1].ep; /* gadget ep0 */ + INIT_LIST_HEAD(&u3d->gadget.ep_list); /* ep_list */ + u3d->gadget.speed = USB_SPEED_UNKNOWN; /* speed */ + + /* the "gadget" abstracts/virtualizes the controller */ + dev_set_name(&u3d->gadget.dev, "gadget"); + u3d->gadget.dev.parent = &dev->dev; + u3d->gadget.dev.dma_mask = dev->dev.dma_mask; + u3d->gadget.dev.release = mv_u3d_gadget_release; + u3d->gadget.name = driver_name; /* gadget name */ + + retval = device_register(&u3d->gadget.dev); + if (retval) + goto err_register_gadget_device; + + mv_u3d_eps_init(u3d); + + /* external vbus detection */ + if (u3d->vbus) { + u3d->clock_gating = 1; + dev_err(&dev->dev, "external vbus detection\n"); + } + + if (!u3d->clock_gating) + u3d->vbus_active = 1; + + /* enable usb3 controller vbus detection */ + u3d->vbus_valid_detect = 1; + + retval = usb_add_gadget_udc(&dev->dev, &u3d->gadget); + if (retval) + goto err_unregister; + + dev_dbg(&dev->dev, "successful probe usb3 device %s clock gating.\n", + u3d->clock_gating ? "with" : "without"); + + return 0; + +err_unregister: + device_unregister(&u3d->gadget.dev); +err_register_gadget_device: + free_irq(u3d->irq, &dev->dev); +err_request_irq: +err_get_irq: + kfree(u3d->status_req); +err_alloc_status_req: + kfree(u3d->eps); +err_alloc_eps: + dma_pool_destroy(u3d->trb_pool); +err_alloc_trb_pool: + dma_free_coherent(&dev->dev, u3d->ep_context_size, + u3d->ep_context, u3d->ep_context_dma); +err_alloc_ep_context: + if (pdata->phy_deinit) + pdata->phy_deinit(u3d->phy_regs); + clk_disable(u3d->clk); +err_u3d_enable: + iounmap(u3d->cap_regs); +err_map_cap_regs: +err_get_cap_regs: +err_get_clk: + clk_put(u3d->clk); + platform_set_drvdata(dev, NULL); + kfree(u3d); +err_alloc_private: +err_pdata: + return retval; +} + +#ifdef CONFIG_PM +static int mv_u3d_suspend(struct device *dev) +{ + struct mv_u3d *u3d = dev_get_drvdata(dev); + + /* + * only cable is unplugged, usb can suspend. + * So do not care about clock_gating == 1, it is handled by + * vbus session. + */ + if (!u3d->clock_gating) { + mv_u3d_controller_stop(u3d); + + spin_lock_irq(&u3d->lock); + /* stop all usb activities */ + mv_u3d_stop_activity(u3d, u3d->driver); + spin_unlock_irq(&u3d->lock); + + mv_u3d_disable(u3d); + } + + return 0; +} + +static int mv_u3d_resume(struct device *dev) +{ + struct mv_u3d *u3d = dev_get_drvdata(dev); + int retval; + + if (!u3d->clock_gating) { + retval = mv_u3d_enable(u3d); + if (retval) + return retval; + + if (u3d->driver && u3d->softconnect) { + mv_u3d_controller_reset(u3d); + mv_u3d_ep0_reset(u3d); + mv_u3d_controller_start(u3d); + } + } + + return 0; +} + +SIMPLE_DEV_PM_OPS(mv_u3d_pm_ops, mv_u3d_suspend, mv_u3d_resume); +#endif + +static void mv_u3d_shutdown(struct platform_device *dev) +{ + struct mv_u3d *u3d = dev_get_drvdata(&dev->dev); + u32 tmp; + + tmp = ioread32(&u3d->op_regs->usbcmd); + tmp &= ~MV_U3D_CMD_RUN_STOP; + iowrite32(tmp, &u3d->op_regs->usbcmd); +} + +static struct platform_driver mv_u3d_driver = { + .probe = mv_u3d_probe, + .remove = __exit_p(mv_u3d_remove), + .shutdown = mv_u3d_shutdown, + .driver = { + .owner = THIS_MODULE, + .name = "mv-u3d", +#ifdef CONFIG_PM + .pm = &mv_u3d_pm_ops, +#endif + }, +}; + +module_platform_driver(mv_u3d_driver); +MODULE_ALIAS("platform:mv-u3d"); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_AUTHOR("Yu Xu <yuxu@marvell.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/mv_udc_core.c index 117a4bba1b8..75db2c306ce 100644 --- a/drivers/usb/gadget/mv_udc_core.c +++ b/drivers/usb/gadget/mv_udc_core.c @@ -19,6 +19,7 @@ #include <linux/sched.h> #include <linux/slab.h> #include <linux/errno.h> +#include <linux/err.h> #include <linux/init.h> #include <linux/timer.h> #include <linux/list.h> @@ -1381,7 +1382,7 @@ static int mv_udc_start(struct usb_gadget_driver *driver, return retval; } - if (udc->transceiver) { + if (!IS_ERR_OR_NULL(udc->transceiver)) { retval = otg_set_peripheral(udc->transceiver->otg, &udc->gadget); if (retval) { @@ -2107,7 +2108,7 @@ static int __devexit mv_udc_remove(struct platform_device *dev) * then vbus irq will not be requested in udc driver. */ if (udc->pdata && udc->pdata->vbus - && udc->clock_gating && udc->transceiver == NULL) + && udc->clock_gating && IS_ERR_OR_NULL(udc->transceiver)) free_irq(udc->pdata->vbus->irq, &dev->dev); /* free memory allocated in probe */ @@ -2180,7 +2181,7 @@ static int __devinit mv_udc_probe(struct platform_device *dev) #ifdef CONFIG_USB_OTG_UTILS if (pdata->mode == MV_USB_MODE_OTG) - udc->transceiver = usb_get_transceiver(); + udc->transceiver = usb_get_phy(USB_PHY_TYPE_USB2); #endif udc->clknum = pdata->clknum; @@ -2325,7 +2326,7 @@ static int __devinit mv_udc_probe(struct platform_device *dev) eps_init(udc); /* VBUS detect: we can disable/enable clock on demand.*/ - if (udc->transceiver) + if (!IS_ERR_OR_NULL(udc->transceiver)) udc->clock_gating = 1; else if (pdata->vbus) { udc->clock_gating = 1; @@ -2369,7 +2370,7 @@ static int __devinit mv_udc_probe(struct platform_device *dev) err_unregister: if (udc->pdata && udc->pdata->vbus - && udc->clock_gating && udc->transceiver == NULL) + && udc->clock_gating && IS_ERR_OR_NULL(udc->transceiver)) free_irq(pdata->vbus->irq, &dev->dev); device_unregister(&udc->gadget.dev); err_free_irq: @@ -2404,7 +2405,7 @@ static int mv_udc_suspend(struct device *_dev) struct mv_udc *udc = the_controller; /* if OTG is enabled, the following will be done in OTG driver*/ - if (udc->transceiver) + if (!IS_ERR_OR_NULL(udc->transceiver)) return 0; if (udc->pdata->vbus && udc->pdata->vbus->poll) @@ -2437,7 +2438,7 @@ static int mv_udc_resume(struct device *_dev) int retval; /* if OTG is enabled, the following will be done in OTG driver*/ - if (udc->transceiver) + if (!IS_ERR_OR_NULL(udc->transceiver)) return 0; if (!udc->clock_gating) { diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c index 89cbd2b22ab..f9132ada53b 100644 --- a/drivers/usb/gadget/omap_udc.c +++ b/drivers/usb/gadget/omap_udc.c @@ -35,10 +35,11 @@ #include <linux/usb/otg.h> #include <linux/dma-mapping.h> #include <linux/clk.h> +#include <linux/err.h> #include <linux/prefetch.h> +#include <linux/io.h> #include <asm/byteorder.h> -#include <asm/io.h> #include <asm/irq.h> #include <asm/unaligned.h> #include <asm/mach-types.h> @@ -60,11 +61,6 @@ #define DRIVER_DESC "OMAP UDC driver" #define DRIVER_VERSION "4 October 2004" -#define DMA_ADDR_INVALID (~(dma_addr_t)0) - -#define OMAP2_DMA_CH(ch) (((ch) - 1) << 1) -#define OMAP24XX_DMA(name, ch) (OMAP24XX_DMA_##name + OMAP2_DMA_CH(ch)) - /* * The OMAP UDC needs _very_ early endpoint setup: before enabling the * D+ pullup to allow enumeration. That's too early for the gadget @@ -88,14 +84,14 @@ #ifdef USE_ISO static unsigned fifo_mode = 3; #else -static unsigned fifo_mode = 0; +static unsigned fifo_mode; #endif /* "modprobe omap_udc fifo_mode=42", or else as a kernel * boot parameter "omap_udc:fifo_mode=42" */ -module_param (fifo_mode, uint, 0); -MODULE_PARM_DESC (fifo_mode, "endpoint configuration"); +module_param(fifo_mode, uint, 0); +MODULE_PARM_DESC(fifo_mode, "endpoint configuration"); #ifdef USE_DMA static bool use_dma = 1; @@ -103,8 +99,8 @@ static bool use_dma = 1; /* "modprobe omap_udc use_dma=y", or else as a kernel * boot parameter "omap_udc:use_dma=y" */ -module_param (use_dma, bool, 0); -MODULE_PARM_DESC (use_dma, "enable/disable DMA"); +module_param(use_dma, bool, 0); +MODULE_PARM_DESC(use_dma, "enable/disable DMA"); #else /* !USE_DMA */ /* save a bit of code */ @@ -112,8 +108,8 @@ MODULE_PARM_DESC (use_dma, "enable/disable DMA"); #endif /* !USE_DMA */ -static const char driver_name [] = "omap_udc"; -static const char driver_desc [] = DRIVER_DESC; +static const char driver_name[] = "omap_udc"; +static const char driver_desc[] = DRIVER_DESC; /*-------------------------------------------------------------------------*/ @@ -251,7 +247,7 @@ static int omap_ep_disable(struct usb_ep *_ep) spin_lock_irqsave(&ep->udc->lock, flags); ep->ep.desc = NULL; - nuke (ep, -ESHUTDOWN); + nuke(ep, -ESHUTDOWN); ep->ep.maxpacket = ep->maxpacket; ep->has_dma = 0; omap_writew(UDC_SET_HALT, UDC_CTRL); @@ -272,10 +268,11 @@ omap_alloc_request(struct usb_ep *ep, gfp_t gfp_flags) struct omap_req *req; req = kzalloc(sizeof(*req), gfp_flags); - if (req) { - req->req.dma = DMA_ADDR_INVALID; - INIT_LIST_HEAD (&req->queue); - } + if (!req) + return NULL; + + INIT_LIST_HEAD(&req->queue); + return &req->req; } @@ -284,8 +281,7 @@ omap_free_request(struct usb_ep *ep, struct usb_request *_req) { struct omap_req *req = container_of(_req, struct omap_req, req); - if (_req) - kfree (req); + kfree(req); } /*-------------------------------------------------------------------------*/ @@ -293,6 +289,7 @@ omap_free_request(struct usb_ep *ep, struct usb_request *_req) static void done(struct omap_ep *ep, struct omap_req *req, int status) { + struct omap_udc *udc = ep->udc; unsigned stopped = ep->stopped; list_del_init(&req->queue); @@ -302,22 +299,9 @@ done(struct omap_ep *ep, struct omap_req *req, int status) else status = req->req.status; - if (use_dma && ep->has_dma) { - if (req->mapped) { - dma_unmap_single(ep->udc->gadget.dev.parent, - req->req.dma, req->req.length, - (ep->bEndpointAddress & USB_DIR_IN) - ? DMA_TO_DEVICE - : DMA_FROM_DEVICE); - req->req.dma = DMA_ADDR_INVALID; - req->mapped = 0; - } else - dma_sync_single_for_cpu(ep->udc->gadget.dev.parent, - req->req.dma, req->req.length, - (ep->bEndpointAddress & USB_DIR_IN) - ? DMA_TO_DEVICE - : DMA_FROM_DEVICE); - } + if (use_dma && ep->has_dma) + usb_gadget_unmap_request(&udc->gadget, &req->req, + (ep->bEndpointAddress & USB_DIR_IN)); #ifndef USB_TRACE if (status && status != -ESHUTDOWN) @@ -365,10 +349,10 @@ write_packet(u8 *buf, struct omap_req *req, unsigned max) return len; } -// FIXME change r/w fifo calling convention +/* FIXME change r/w fifo calling convention */ -// return: 0 = still running, 1 = completed, negative = errno +/* return: 0 = still running, 1 = completed, negative = errno */ static int write_fifo(struct omap_ep *ep, struct omap_req *req) { u8 *buf; @@ -430,7 +414,7 @@ read_packet(u8 *buf, struct omap_req *req, unsigned avail) return len; } -// return: 0 = still running, 1 = queue empty, negative = errno +/* return: 0 = still running, 1 = queue empty, negative = errno */ static int read_fifo(struct omap_ep *ep, struct omap_req *req) { u8 *buf; @@ -537,12 +521,8 @@ static void next_in_dma(struct omap_ep *ep, struct omap_req *req) : OMAP_DMA_SYNC_ELEMENT; int dma_trigger = 0; - if (cpu_is_omap24xx()) - dma_trigger = OMAP24XX_DMA(USB_W2FC_TX0, ep->dma_channel); - /* measure length in either bytes or packets */ if ((cpu_is_omap16xx() && length <= UDC_TXN_TSC) - || (cpu_is_omap24xx() && length < ep->maxpacket) || (cpu_is_omap15xx() && length < ep->maxpacket)) { txdma_ctrl = UDC_TXN_EOT | length; omap_set_dma_transfer_params(ep->lch, OMAP_DMA_DATA_TYPE_S8, @@ -601,28 +581,14 @@ static void next_out_dma(struct omap_ep *ep, struct omap_req *req) int dma_trigger = 0; u16 w; - if (cpu_is_omap24xx()) - dma_trigger = OMAP24XX_DMA(USB_W2FC_RX0, ep->dma_channel); - - /* NOTE: we filtered out "short reads" before, so we know - * the buffer has only whole numbers of packets. - * except MODE SELECT(6) sent the 24 bytes data in OMAP24XX DMA mode - */ - if (cpu_is_omap24xx() && packets < ep->maxpacket) { - omap_set_dma_transfer_params(ep->lch, OMAP_DMA_DATA_TYPE_S8, - packets, 1, OMAP_DMA_SYNC_ELEMENT, - dma_trigger, 0); - req->dma_bytes = packets; - } else { - /* set up this DMA transfer, enable the fifo, start */ - packets /= ep->ep.maxpacket; - packets = min(packets, (unsigned)UDC_RXN_TC + 1); - req->dma_bytes = packets * ep->ep.maxpacket; - omap_set_dma_transfer_params(ep->lch, OMAP_DMA_DATA_TYPE_S16, - ep->ep.maxpacket >> 1, packets, - OMAP_DMA_SYNC_ELEMENT, - dma_trigger, 0); - } + /* set up this DMA transfer, enable the fifo, start */ + packets /= ep->ep.maxpacket; + packets = min(packets, (unsigned)UDC_RXN_TC + 1); + req->dma_bytes = packets * ep->ep.maxpacket; + omap_set_dma_transfer_params(ep->lch, OMAP_DMA_DATA_TYPE_S16, + ep->ep.maxpacket >> 1, packets, + OMAP_DMA_SYNC_ELEMENT, + dma_trigger, 0); omap_set_dma_dest_params(ep->lch, OMAP_DMA_PORT_EMIFF, OMAP_DMA_AMODE_POST_INC, req->req.dma + req->req.actual, 0, 0); @@ -684,7 +650,7 @@ static void dma_irq(struct omap_udc *udc, u16 irq_src) } omap_writew(UDC_TXN_DONE, UDC_IRQ_SRC); - if (!list_empty (&ep->queue)) { + if (!list_empty(&ep->queue)) { req = container_of(ep->queue.next, struct omap_req, queue); next_in_dma(ep, req); @@ -703,7 +669,7 @@ static void dma_irq(struct omap_udc *udc, u16 irq_src) } omap_writew(UDC_RXN_EOT, UDC_IRQ_SRC); - if (!list_empty (&ep->queue)) { + if (!list_empty(&ep->queue)) { req = container_of(ep->queue.next, struct omap_req, queue); next_out_dma(ep, req); @@ -761,10 +727,7 @@ static void dma_channel_claim(struct omap_ep *ep, unsigned channel) ep->dma_channel = channel; if (is_in) { - if (cpu_is_omap24xx()) - dma_channel = OMAP24XX_DMA(USB_W2FC_TX0, channel); - else - dma_channel = OMAP_DMA_USB_W2FC_TX0 - 1 + channel; + dma_channel = OMAP_DMA_USB_W2FC_TX0 - 1 + channel; status = omap_request_dma(dma_channel, ep->ep.name, dma_error, ep, &ep->lch); if (status == 0) { @@ -781,11 +744,7 @@ static void dma_channel_claim(struct omap_ep *ep, unsigned channel) 0, 0); } } else { - if (cpu_is_omap24xx()) - dma_channel = OMAP24XX_DMA(USB_W2FC_RX0, channel); - else - dma_channel = OMAP_DMA_USB_W2FC_RX0 - 1 + channel; - + dma_channel = OMAP_DMA_USB_W2FC_RX0 - 1 + channel; status = omap_request_dma(dma_channel, ep->ep.name, dma_error, ep, &ep->lch); if (status == 0) { @@ -809,7 +768,7 @@ static void dma_channel_claim(struct omap_ep *ep, unsigned channel) omap_disable_dma_irq(ep->lch, OMAP_DMA_BLOCK_IRQ); /* channel type P: hw synch (fifo) */ - if (cpu_class_is_omap1() && !cpu_is_omap15xx()) + if (!cpu_is_omap15xx()) omap_set_dma_channel_mode(ep->lch, OMAP_DMA_LCH_P); } @@ -929,13 +888,11 @@ omap_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) /* this isn't bogus, but OMAP DMA isn't the only hardware to * have a hard time with partial packet reads... reject it. - * Except OMAP2 can handle the small packets. */ if (use_dma && ep->has_dma && ep->bEndpointAddress != 0 && (ep->bEndpointAddress & USB_DIR_IN) == 0 - && !cpu_class_is_omap2() && (req->req.length % ep->ep.maxpacket) != 0) { DBG("%s, no partial packet OUT reads\n", __func__); return -EMSGSIZE; @@ -945,26 +902,9 @@ omap_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN) return -ESHUTDOWN; - if (use_dma && ep->has_dma) { - if (req->req.dma == DMA_ADDR_INVALID) { - req->req.dma = dma_map_single( - ep->udc->gadget.dev.parent, - req->req.buf, - req->req.length, - (ep->bEndpointAddress & USB_DIR_IN) - ? DMA_TO_DEVICE - : DMA_FROM_DEVICE); - req->mapped = 1; - } else { - dma_sync_single_for_device( - ep->udc->gadget.dev.parent, - req->req.dma, req->req.length, - (ep->bEndpointAddress & USB_DIR_IN) - ? DMA_TO_DEVICE - : DMA_FROM_DEVICE); - req->mapped = 0; - } - } + if (use_dma && ep->has_dma) + usb_gadget_map_request(&udc->gadget, &req->req, + (ep->bEndpointAddress & USB_DIR_IN)); VDBG("%s queue req %p, len %d buf %p\n", ep->ep.name, _req, _req->length, _req->buf); @@ -985,7 +925,7 @@ omap_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) int is_in; if (ep->bEndpointAddress == 0) { - if (!udc->ep0_pending || !list_empty (&ep->queue)) { + if (!udc->ep0_pending || !list_empty(&ep->queue)) { spin_unlock_irqrestore(&udc->lock, flags); return -EL2HLT; } @@ -1012,7 +952,8 @@ omap_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) * always an IN ... even for IN transfers, * a weird case which seem to stall OMAP. */ - omap_writew(UDC_EP_SEL | UDC_EP_DIR, UDC_EP_NUM); + omap_writew(UDC_EP_SEL | UDC_EP_DIR, + UDC_EP_NUM); omap_writew(UDC_CLR_EP, UDC_CTRL); omap_writew(UDC_SET_FIFO_EN, UDC_CTRL); omap_writew(UDC_EP_DIR, UDC_EP_NUM); @@ -1024,7 +965,8 @@ omap_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) /* non-empty DATA stage */ } else if (is_in) { - omap_writew(UDC_EP_SEL | UDC_EP_DIR, UDC_EP_NUM); + omap_writew(UDC_EP_SEL | UDC_EP_DIR, + UDC_EP_NUM); } else { if (udc->ep0_setup) goto irq_wait; @@ -1072,7 +1014,7 @@ static int omap_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req) spin_lock_irqsave(&ep->udc->lock, flags); /* make sure it's actually queued on this endpoint */ - list_for_each_entry (req, &ep->queue, queue) { + list_for_each_entry(req, &ep->queue, queue) { if (&req->req == _req) break; } @@ -1179,8 +1121,8 @@ static struct usb_ep_ops omap_ep_ops = { .dequeue = omap_ep_dequeue, .set_halt = omap_ep_set_halt, - // fifo_status ... report bytes in fifo - // fifo_flush ... flush fifo + /* fifo_status ... report bytes in fifo */ + /* fifo_flush ... flush fifo */ }; /*-------------------------------------------------------------------------*/ @@ -1212,7 +1154,7 @@ static int omap_wakeup(struct usb_gadget *gadget) /* NOTE: non-OTG systems may use SRP TOO... */ } else if (!(udc->devstat & UDC_ATT)) { - if (udc->transceiver) + if (!IS_ERR_OR_NULL(udc->transceiver)) retval = otg_start_srp(udc->transceiver->otg); } spin_unlock_irqrestore(&udc->lock, flags); @@ -1344,7 +1286,7 @@ static int omap_vbus_draw(struct usb_gadget *gadget, unsigned mA) struct omap_udc *udc; udc = container_of(gadget, struct omap_udc, gadget); - if (udc->transceiver) + if (!IS_ERR_OR_NULL(udc->transceiver)) return usb_phy_set_power(udc->transceiver, mA); return -EOPNOTSUPP; } @@ -1410,7 +1352,7 @@ static void udc_quiesce(struct omap_udc *udc) udc->gadget.speed = USB_SPEED_UNKNOWN; nuke(&udc->ep[0], -ESHUTDOWN); - list_for_each_entry (ep, &udc->gadget.ep_list, ep.ep_list) + list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list) nuke(ep, -ESHUTDOWN); } @@ -1526,7 +1468,8 @@ static void ep0_irq(struct omap_udc *udc, u16 irq_src) /* read next OUT packet of request, maybe * reactiviting the fifo; stall on errors. */ - if (!req || (stat = read_fifo(ep0, req)) < 0) { + stat = read_fifo(ep0, req); + if (!req || stat < 0) { omap_writew(UDC_STALL_CMD, UDC_SYSCON2); udc->ep0_pending = 0; stat = 0; @@ -1659,7 +1602,7 @@ static void ep0_irq(struct omap_udc *udc, u16 irq_src) /* this has rude side-effects (aborts) and * can't really work if DMA-IN is active */ - DBG("%s host set_halt, NYET \n", ep->name); + DBG("%s host set_halt, NYET\n", ep->name); goto do_stall; } use_ep(ep, 0); @@ -1750,7 +1693,7 @@ delegate: */ udc->ep0_setup = 1; spin_unlock(&udc->lock); - status = udc->driver->setup (&udc->gadget, &u.r); + status = udc->driver->setup(&udc->gadget, &u.r); spin_lock(&udc->lock); udc->ep0_setup = 0; } @@ -1793,12 +1736,12 @@ static void devstate_irq(struct omap_udc *udc, u16 irq_src) if (devstat & UDC_ATT) { udc->gadget.speed = USB_SPEED_FULL; VDBG("connect\n"); - if (!udc->transceiver) + if (IS_ERR_OR_NULL(udc->transceiver)) pullup_enable(udc); - // if (driver->connect) call it + /* if (driver->connect) call it */ } else if (udc->gadget.speed != USB_SPEED_UNKNOWN) { udc->gadget.speed = USB_SPEED_UNKNOWN; - if (!udc->transceiver) + if (IS_ERR_OR_NULL(udc->transceiver)) pullup_disable(udc); DBG("disconnect, gadget %s\n", udc->driver->driver.name); @@ -1827,7 +1770,7 @@ static void devstate_irq(struct omap_udc *udc, u16 irq_src) } if (change & UDC_SUS) { if (udc->gadget.speed != USB_SPEED_UNKNOWN) { - // FIXME tell isp1301 to suspend/resume (?) + /* FIXME tell isp1301 to suspend/resume (?) */ if (devstat & UDC_SUS) { VDBG("suspend\n"); update_otg(udc); @@ -1838,12 +1781,12 @@ static void devstate_irq(struct omap_udc *udc, u16 irq_src) udc->driver->suspend(&udc->gadget); spin_lock(&udc->lock); } - if (udc->transceiver) + if (!IS_ERR_OR_NULL(udc->transceiver)) usb_phy_set_suspend( udc->transceiver, 1); } else { VDBG("resume\n"); - if (udc->transceiver) + if (!IS_ERR_OR_NULL(udc->transceiver)) usb_phy_set_suspend( udc->transceiver, 0); if (udc->gadget.speed == USB_SPEED_FULL @@ -2030,7 +1973,7 @@ static irqreturn_t omap_udc_iso_irq(int irq, void *_dev) spin_lock_irqsave(&udc->lock, flags); /* handle all non-DMA ISO transfers */ - list_for_each_entry (ep, &udc->iso, iso) { + list_for_each_entry(ep, &udc->iso, iso) { u16 stat; struct omap_req *req; @@ -2089,15 +2032,11 @@ static irqreturn_t omap_udc_iso_irq(int irq, void *_dev) static inline int machine_without_vbus_sense(void) { - return (machine_is_omap_innovator() + return machine_is_omap_innovator() || machine_is_omap_osk() - || machine_is_omap_apollon() -#ifndef CONFIG_MACH_OMAP_H4_OTG - || machine_is_omap_h4() -#endif || machine_is_sx1() - || cpu_is_omap7xx() /* No known omap7xx boards with vbus sense */ - ); + /* No known omap7xx boards with vbus sense */ + || cpu_is_omap7xx(); } static int omap_udc_start(struct usb_gadget_driver *driver, @@ -2111,7 +2050,7 @@ static int omap_udc_start(struct usb_gadget_driver *driver, if (!udc) return -ENODEV; if (!driver - // FIXME if otg, check: driver->is_otg + /* FIXME if otg, check: driver->is_otg */ || driver->max_speed < USB_SPEED_FULL || !bind || !driver->setup) return -EINVAL; @@ -2123,7 +2062,7 @@ static int omap_udc_start(struct usb_gadget_driver *driver, } /* reset state */ - list_for_each_entry (ep, &udc->gadget.ep_list, ep.ep_list) { + list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list) { ep->irqs = 0; if (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC) continue; @@ -2155,13 +2094,13 @@ static int omap_udc_start(struct usb_gadget_driver *driver, omap_writew(UDC_IRQ_SRC_MASK, UDC_IRQ_SRC); /* connect to bus through transceiver */ - if (udc->transceiver) { + if (!IS_ERR_OR_NULL(udc->transceiver)) { status = otg_set_peripheral(udc->transceiver->otg, &udc->gadget); if (status < 0) { ERR("can't bind to transceiver\n"); if (driver->unbind) { - driver->unbind (&udc->gadget); + driver->unbind(&udc->gadget); udc->gadget.dev.driver = NULL; udc->driver = NULL; } @@ -2169,9 +2108,9 @@ static int omap_udc_start(struct usb_gadget_driver *driver, } } else { if (can_pullup(udc)) - pullup_enable (udc); + pullup_enable(udc); else - pullup_disable (udc); + pullup_disable(udc); } /* boards that don't have VBUS sensing can't autogate 48MHz; @@ -2202,7 +2141,7 @@ static int omap_udc_stop(struct usb_gadget_driver *driver) if (machine_without_vbus_sense()) omap_vbus_session(&udc->gadget, 0); - if (udc->transceiver) + if (!IS_ERR_OR_NULL(udc->transceiver)) (void) otg_set_peripheral(udc->transceiver->otg, NULL); else pullup_disable(udc); @@ -2230,7 +2169,7 @@ static int omap_udc_stop(struct usb_gadget_driver *driver) static const char proc_filename[] = "driver/udc"; #define FOURBITS "%s%s%s%s" -#define EIGHTBITS FOURBITS FOURBITS +#define EIGHTBITS "%s%s%s%s%s%s%s%s" static void proc_ep_show(struct seq_file *s, struct omap_ep *ep) { @@ -2252,12 +2191,21 @@ static void proc_ep_show(struct seq_file *s, struct omap_ep *ep) "\n%s %s%s%sirqs %ld stat %04x " EIGHTBITS FOURBITS "%s\n", ep->name, buf, ep->double_buf ? "dbuf " : "", - ({char *s; switch(ep->ackwait){ - case 0: s = ""; break; - case 1: s = "(ackw) "; break; - case 2: s = "(ackw2) "; break; - default: s = "(?) "; break; - } s;}), + ({ char *s; + switch (ep->ackwait) { + case 0: + s = ""; + break; + case 1: + s = "(ackw) "; + break; + case 2: + s = "(ackw2) "; + break; + default: + s = "(?) "; + break; + } s; }), ep->irqs, stat_flg, (stat_flg & UDC_NO_RXPACKET) ? "no_rxpacket " : "", (stat_flg & UDC_MISS_IN) ? "miss_in " : "", @@ -2273,10 +2221,10 @@ static void proc_ep_show(struct seq_file *s, struct omap_ep *ep) (stat_flg & UDC_NON_ISO_FIFO_EMPTY) ? "fifo_empty " : "", (stat_flg & UDC_NON_ISO_FIFO_FULL) ? "fifo_full " : ""); - if (list_empty (&ep->queue)) + if (list_empty(&ep->queue)) seq_printf(s, "\t(queue empty)\n"); else - list_for_each_entry (req, &ep->queue, queue) { + list_for_each_entry(req, &ep->queue, queue) { unsigned length = req->req.actual; if (use_dma && buf[0]) { @@ -2294,11 +2242,16 @@ static void proc_ep_show(struct seq_file *s, struct omap_ep *ep) static char *trx_mode(unsigned m, int enabled) { switch (m) { - case 0: return enabled ? "*6wire" : "unused"; - case 1: return "4wire"; - case 2: return "3wire"; - case 3: return "6wire"; - default: return "unknown"; + case 0: + return enabled ? "*6wire" : "unused"; + case 1: + return "4wire"; + case 2: + return "3wire"; + case 3: + return "6wire"; + default: + return "unknown"; } } @@ -2308,12 +2261,9 @@ static int proc_otg_show(struct seq_file *s) u32 trans = 0; char *ctrl_name = "(UNKNOWN)"; - /* XXX This needs major revision for OMAP2+ */ tmp = omap_readl(OTG_REV); - if (cpu_class_is_omap1()) { - ctrl_name = "tranceiver_ctrl"; - trans = omap_readw(USB_TRANSCEIVER_CTRL); - } + ctrl_name = "tranceiver_ctrl"; + trans = omap_readw(USB_TRANSCEIVER_CTRL); seq_printf(s, "\nOTG rev %d.%d, %s %05x\n", tmp >> 4, tmp & 0xf, ctrl_name, trans); tmp = omap_readw(OTG_SYSCON_1); @@ -2333,7 +2283,7 @@ static int proc_otg_show(struct seq_file *s) " b_ase_brst=%d hmc=%d\n", tmp, (tmp & OTG_EN) ? " otg_en" : "", (tmp & USBX_SYNCHRO) ? " synchro" : "", - // much more SRP stuff + /* much more SRP stuff */ (tmp & SRP_DATA) ? " srp_data" : "", (tmp & SRP_VBUS) ? " srp_vbus" : "", (tmp & OTG_PADEN) ? " otg_paden" : "", @@ -2400,14 +2350,12 @@ static int proc_udc_show(struct seq_file *s, void *_) HMC, udc->transceiver ? udc->transceiver->label - : ((cpu_is_omap1710() || cpu_is_omap24xx()) + : (cpu_is_omap1710() ? "external" : "(none)")); - if (cpu_class_is_omap1()) { - seq_printf(s, "ULPD control %04x req %04x status %04x\n", - omap_readw(ULPD_CLOCK_CTRL), - omap_readw(ULPD_SOFT_REQ), - omap_readw(ULPD_STATUS_REQ)); - } + seq_printf(s, "ULPD control %04x req %04x status %04x\n", + omap_readw(ULPD_CLOCK_CTRL), + omap_readw(ULPD_SOFT_REQ), + omap_readw(ULPD_STATUS_REQ)); /* OTG controller registers */ if (!cpu_is_omap15xx()) @@ -2423,7 +2371,7 @@ static int proc_udc_show(struct seq_file *s, void *_) (tmp & UDC_SELF_PWR) ? " self_pwr" : "", (tmp & UDC_SOFF_DIS) ? " soff_dis" : "", (tmp & UDC_PULLUP_EN) ? " PULLUP" : ""); - // syscon2 is write-only + /* syscon2 is write-only */ /* UDC controller registers */ if (!(tmp & UDC_PULLUP_EN)) { @@ -2507,7 +2455,7 @@ static int proc_udc_show(struct seq_file *s, void *_) if (tmp & UDC_ATT) { proc_ep_show(s, &udc->ep[0]); if (tmp & UDC_ADD) { - list_for_each_entry (ep, &udc->gadget.ep_list, + list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list) { if (ep->ep.desc) proc_ep_show(s, ep); @@ -2558,7 +2506,7 @@ static inline void remove_proc_file(void) {} * UDC_SYSCON_1.CFG_LOCK is set can now work. We won't use that * capability yet though. */ -static unsigned __init +static unsigned __devinit omap_ep_setup(char *name, u8 addr, u8 type, unsigned buf, unsigned maxp, int dbuf) { @@ -2576,14 +2524,29 @@ omap_ep_setup(char *name, u8 addr, u8 type, /* chip setup ... bit values are same for IN, OUT */ if (type == USB_ENDPOINT_XFER_ISOC) { switch (maxp) { - case 8: epn_rxtx = 0 << 12; break; - case 16: epn_rxtx = 1 << 12; break; - case 32: epn_rxtx = 2 << 12; break; - case 64: epn_rxtx = 3 << 12; break; - case 128: epn_rxtx = 4 << 12; break; - case 256: epn_rxtx = 5 << 12; break; - case 512: epn_rxtx = 6 << 12; break; - default: BUG(); + case 8: + epn_rxtx = 0 << 12; + break; + case 16: + epn_rxtx = 1 << 12; + break; + case 32: + epn_rxtx = 2 << 12; + break; + case 64: + epn_rxtx = 3 << 12; + break; + case 128: + epn_rxtx = 4 << 12; + break; + case 256: + epn_rxtx = 5 << 12; + break; + case 512: + epn_rxtx = 6 << 12; + break; + default: + BUG(); } epn_rxtx |= UDC_EPN_RX_ISO; dbuf = 1; @@ -2592,15 +2555,24 @@ omap_ep_setup(char *name, u8 addr, u8 type, * and ignored for PIO-IN on newer chips * (for more reliable behavior) */ - if (!use_dma || cpu_is_omap15xx() || cpu_is_omap24xx()) + if (!use_dma || cpu_is_omap15xx()) dbuf = 0; switch (maxp) { - case 8: epn_rxtx = 0 << 12; break; - case 16: epn_rxtx = 1 << 12; break; - case 32: epn_rxtx = 2 << 12; break; - case 64: epn_rxtx = 3 << 12; break; - default: BUG(); + case 8: + epn_rxtx = 0 << 12; + break; + case 16: + epn_rxtx = 1 << 12; + break; + case 32: + epn_rxtx = 2 << 12; + break; + case 64: + epn_rxtx = 3 << 12; + break; + default: + BUG(); } if (dbuf && addr) epn_rxtx |= UDC_EPN_RX_DB; @@ -2640,7 +2612,7 @@ omap_ep_setup(char *name, u8 addr, u8 type, ep->ep.name = ep->name; ep->ep.ops = &omap_ep_ops; ep->ep.maxpacket = ep->maxpacket = maxp; - list_add_tail (&ep->ep.ep_list, &udc->gadget.ep_list); + list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list); return buf; } @@ -2648,11 +2620,11 @@ omap_ep_setup(char *name, u8 addr, u8 type, static void omap_udc_release(struct device *dev) { complete(udc->done); - kfree (udc); + kfree(udc); udc = NULL; } -static int __init +static int __devinit omap_udc_setup(struct platform_device *odev, struct usb_phy *xceiv) { unsigned tmp, buf; @@ -2666,13 +2638,13 @@ omap_udc_setup(struct platform_device *odev, struct usb_phy *xceiv) omap_writew(0, UDC_TXDMA_CFG); /* UDC_PULLUP_EN gates the chip clock */ - // OTG_SYSCON_1 |= DEV_IDLE_EN; + /* OTG_SYSCON_1 |= DEV_IDLE_EN; */ udc = kzalloc(sizeof(*udc), GFP_KERNEL); if (!udc) return -ENOMEM; - spin_lock_init (&udc->lock); + spin_lock_init(&udc->lock); udc->gadget.ops = &omap_gadget_ops; udc->gadget.ep0 = &udc->ep[0].ep; @@ -2702,13 +2674,13 @@ omap_udc_setup(struct platform_device *odev, struct usb_phy *xceiv) omap_writew(0, UDC_EP_TX(tmp)); } -#define OMAP_BULK_EP(name,addr) \ +#define OMAP_BULK_EP(name, addr) \ buf = omap_ep_setup(name "-bulk", addr, \ USB_ENDPOINT_XFER_BULK, buf, 64, 1); -#define OMAP_INT_EP(name,addr, maxp) \ +#define OMAP_INT_EP(name, addr, maxp) \ buf = omap_ep_setup(name "-int", addr, \ USB_ENDPOINT_XFER_INT, buf, maxp, 0); -#define OMAP_ISO_EP(name,addr, maxp) \ +#define OMAP_ISO_EP(name, addr, maxp) \ buf = omap_ep_setup(name "-iso", addr, \ USB_ENDPOINT_XFER_ISOC, buf, maxp, 1); @@ -2789,15 +2761,18 @@ omap_udc_setup(struct platform_device *odev, struct usb_phy *xceiv) return 0; } -static int __init omap_udc_probe(struct platform_device *pdev) +static int __devinit omap_udc_probe(struct platform_device *pdev) { int status = -ENODEV; int hmc; struct usb_phy *xceiv = NULL; const char *type = NULL; struct omap_usb_config *config = pdev->dev.platform_data; - struct clk *dc_clk; - struct clk *hhc_clk; + struct clk *dc_clk = NULL; + struct clk *hhc_clk = NULL; + + if (cpu_is_omap7xx()) + use_dma = 0; /* NOTE: "knows" the order of the resources! */ if (!request_mem_region(pdev->resource[0].start, @@ -2817,16 +2792,6 @@ static int __init omap_udc_probe(struct platform_device *pdev) udelay(100); } - if (cpu_is_omap24xx()) { - dc_clk = clk_get(&pdev->dev, "usb_fck"); - hhc_clk = clk_get(&pdev->dev, "usb_l4_ick"); - BUG_ON(IS_ERR(dc_clk) || IS_ERR(hhc_clk)); - /* can't use omap_udc_enable_clock yet */ - clk_enable(dc_clk); - clk_enable(hhc_clk); - udelay(100); - } - if (cpu_is_omap7xx()) { dc_clk = clk_get(&pdev->dev, "usb_dc_ck"); hhc_clk = clk_get(&pdev->dev, "l3_ocpi_ck"); @@ -2866,8 +2831,8 @@ static int __init omap_udc_probe(struct platform_device *pdev) * use it. Except for OTG, we don't _need_ to talk to one; * but not having one probably means no VBUS detection. */ - xceiv = usb_get_transceiver(); - if (xceiv) + xceiv = usb_get_phy(USB_PHY_TYPE_USB2); + if (!IS_ERR_OR_NULL(xceiv)) type = xceiv->label; else if (config->otg) { DBG("OTG requires external transceiver!\n"); @@ -2876,14 +2841,6 @@ static int __init omap_udc_probe(struct platform_device *pdev) hmc = HMC_1610; - if (cpu_is_omap24xx()) { - /* this could be transceiverless in one of the - * "we don't need to know" modes. - */ - type = "external"; - goto known; - } - switch (hmc) { case 0: /* POWERUP DEFAULT == 0 */ case 4: @@ -2899,7 +2856,7 @@ static int __init omap_udc_probe(struct platform_device *pdev) case 16: case 19: case 25: - if (!xceiv) { + if (IS_ERR_OR_NULL(xceiv)) { DBG("external transceiver not registered!\n"); type = "unknown"; } @@ -2922,16 +2879,16 @@ bad_on_1710: goto cleanup0; } } -known: + INFO("hmc mode %d, %s transceiver\n", hmc, type); /* a "gadget" abstracts/virtualizes the controller */ status = omap_udc_setup(pdev, xceiv); - if (status) { + if (status) goto cleanup0; - } + xceiv = NULL; - // "udc" is now valid + /* "udc" is now valid */ pullup_disable(udc); #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) udc->gadget.is_otg = (config->otg != 0); @@ -2945,7 +2902,7 @@ known: /* USB general purpose IRQ: ep0, state changes, dma, etc */ status = request_irq(pdev->resource[1].start, omap_udc_irq, - IRQF_SAMPLE_RANDOM, driver_name, udc); + 0, driver_name, udc); if (status != 0) { ERR("can't get irq %d, err %d\n", (int) pdev->resource[1].start, status); @@ -2954,7 +2911,7 @@ known: /* USB "non-iso" IRQ (PIO for all but ep0) */ status = request_irq(pdev->resource[2].start, omap_udc_pio_irq, - IRQF_SAMPLE_RANDOM, "omap_udc pio", udc); + 0, "omap_udc pio", udc); if (status != 0) { ERR("can't get irq %d, err %d\n", (int) pdev->resource[2].start, status); @@ -2976,16 +2933,6 @@ known: clk_disable(dc_clk); } - if (cpu_is_omap24xx()) { - udc->dc_clk = dc_clk; - udc->hhc_clk = hhc_clk; - /* FIXME OMAP2 don't release hhc & dc clock */ -#if 0 - clk_disable(hhc_clk); - clk_disable(dc_clk); -#endif - } - create_proc_file(); status = device_add(&udc->gadget.dev); if (status) @@ -3007,14 +2954,14 @@ cleanup2: free_irq(pdev->resource[1].start, udc); cleanup1: - kfree (udc); + kfree(udc); udc = NULL; cleanup0: - if (xceiv) - usb_put_transceiver(xceiv); + if (!IS_ERR_OR_NULL(xceiv)) + usb_put_phy(xceiv); - if (cpu_is_omap16xx() || cpu_is_omap24xx() || cpu_is_omap7xx()) { + if (cpu_is_omap16xx() || cpu_is_omap7xx()) { clk_disable(hhc_clk); clk_disable(dc_clk); clk_put(hhc_clk); @@ -3027,7 +2974,7 @@ cleanup0: return status; } -static int __exit omap_udc_remove(struct platform_device *pdev) +static int __devexit omap_udc_remove(struct platform_device *pdev) { DECLARE_COMPLETION_ONSTACK(done); @@ -3041,8 +2988,8 @@ static int __exit omap_udc_remove(struct platform_device *pdev) udc->done = &done; pullup_disable(udc); - if (udc->transceiver) { - usb_put_transceiver(udc->transceiver); + if (!IS_ERR_OR_NULL(udc->transceiver)) { + usb_put_phy(udc->transceiver); udc->transceiver = NULL; } omap_writew(0, UDC_SYSCON1); @@ -3112,7 +3059,8 @@ static int omap_udc_resume(struct platform_device *dev) /*-------------------------------------------------------------------------*/ static struct platform_driver udc_driver = { - .remove = __exit_p(omap_udc_remove), + .probe = omap_udc_probe, + .remove = __devexit_p(omap_udc_remove), .suspend = omap_udc_suspend, .resume = omap_udc_resume, .driver = { @@ -3121,27 +3069,7 @@ static struct platform_driver udc_driver = { }, }; -static int __init udc_init(void) -{ - /* Disable DMA for omap7xx -- it doesn't work right. */ - if (cpu_is_omap7xx()) - use_dma = 0; - - INFO("%s, version: " DRIVER_VERSION -#ifdef USE_ISO - " (iso)" -#endif - "%s\n", driver_desc, - use_dma ? " (dma)" : ""); - return platform_driver_probe(&udc_driver, omap_udc_probe); -} -module_init(udc_init); - -static void __exit udc_exit(void) -{ - platform_driver_unregister(&udc_driver); -} -module_exit(udc_exit); +module_platform_driver(udc_driver); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); diff --git a/drivers/usb/gadget/pch_udc.c b/drivers/usb/gadget/pch_udc.c index 1cfcc9ecbfb..f4fb71c9ae0 100644 --- a/drivers/usb/gadget/pch_udc.c +++ b/drivers/usb/gadget/pch_udc.c @@ -2208,7 +2208,7 @@ static void pch_udc_complete_receiver(struct pch_udc_ep *ep) return; } if ((td->status & PCH_UDC_BUFF_STS) == PCH_UDC_BS_DMA_DONE) - if (td->status | PCH_UDC_DMA_LAST) { + if (td->status & PCH_UDC_DMA_LAST) { count = td->status & PCH_UDC_RXTX_BYTES; break; } diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c index f7ff9e8e746..53c093b941e 100644 --- a/drivers/usb/gadget/pxa25x_udc.c +++ b/drivers/usb/gadget/pxa25x_udc.c @@ -21,6 +21,7 @@ #include <linux/ioport.h> #include <linux/types.h> #include <linux/errno.h> +#include <linux/err.h> #include <linux/delay.h> #include <linux/slab.h> #include <linux/init.h> @@ -993,7 +994,7 @@ static int pxa25x_udc_vbus_draw(struct usb_gadget *_gadget, unsigned mA) udc = container_of(_gadget, struct pxa25x_udc, gadget); - if (udc->transceiver) + if (!IS_ERR_OR_NULL(udc->transceiver)) return usb_phy_set_power(udc->transceiver, mA); return -EOPNOTSUPP; } @@ -1299,7 +1300,7 @@ fail: DMSG("registered gadget driver '%s'\n", driver->driver.name); /* connect to bus through transceiver */ - if (dev->transceiver) { + if (!IS_ERR_OR_NULL(dev->transceiver)) { retval = otg_set_peripheral(dev->transceiver->otg, &dev->gadget); if (retval) { @@ -1359,7 +1360,7 @@ static int pxa25x_stop(struct usb_gadget_driver *driver) stop_activity(dev, driver); local_irq_enable(); - if (dev->transceiver) + if (!IS_ERR_OR_NULL(dev->transceiver)) (void) otg_set_peripheral(dev->transceiver->otg, NULL); driver->unbind(&dev->gadget); @@ -2159,7 +2160,7 @@ static int __init pxa25x_udc_probe(struct platform_device *pdev) dev->dev = &pdev->dev; dev->mach = pdev->dev.platform_data; - dev->transceiver = usb_get_transceiver(); + dev->transceiver = usb_get_phy(USB_PHY_TYPE_USB2); if (gpio_is_valid(dev->mach->gpio_pullup)) { if ((retval = gpio_request(dev->mach->gpio_pullup, @@ -2237,8 +2238,8 @@ lubbock_fail0: if (gpio_is_valid(dev->mach->gpio_pullup)) gpio_free(dev->mach->gpio_pullup); err_gpio_pullup: - if (dev->transceiver) { - usb_put_transceiver(dev->transceiver); + if (!IS_ERR_OR_NULL(dev->transceiver)) { + usb_put_phy(dev->transceiver); dev->transceiver = NULL; } clk_put(dev->clk); @@ -2279,8 +2280,8 @@ static int __exit pxa25x_udc_remove(struct platform_device *pdev) clk_put(dev->clk); - if (dev->transceiver) { - usb_put_transceiver(dev->transceiver); + if (!IS_ERR_OR_NULL(dev->transceiver)) { + usb_put_phy(dev->transceiver); dev->transceiver = NULL; } diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c index 98acb3ab9e1..644b4305cb9 100644 --- a/drivers/usb/gadget/pxa27x_udc.c +++ b/drivers/usb/gadget/pxa27x_udc.c @@ -13,6 +13,7 @@ #include <linux/kernel.h> #include <linux/types.h> #include <linux/errno.h> +#include <linux/err.h> #include <linux/platform_device.h> #include <linux/delay.h> #include <linux/list.h> @@ -1573,7 +1574,7 @@ static int should_enable_udc(struct pxa_udc *udc) int put_on; put_on = ((udc->pullup_on) && (udc->driver)); - put_on &= ((udc->vbus_sensed) || (!udc->transceiver)); + put_on &= ((udc->vbus_sensed) || (IS_ERR_OR_NULL(udc->transceiver))); return put_on; } @@ -1594,7 +1595,7 @@ static int should_disable_udc(struct pxa_udc *udc) int put_off; put_off = ((!udc->pullup_on) || (!udc->driver)); - put_off |= ((!udc->vbus_sensed) && (udc->transceiver)); + put_off |= ((!udc->vbus_sensed) && (!IS_ERR_OR_NULL(udc->transceiver))); return put_off; } @@ -1665,7 +1666,7 @@ static int pxa_udc_vbus_draw(struct usb_gadget *_gadget, unsigned mA) struct pxa_udc *udc; udc = to_gadget_udc(_gadget); - if (udc->transceiver) + if (!IS_ERR_OR_NULL(udc->transceiver)) return usb_phy_set_power(udc->transceiver, mA); return -EOPNOTSUPP; } @@ -1834,7 +1835,7 @@ static int pxa27x_udc_start(struct usb_gadget_driver *driver, dev_dbg(udc->dev, "registered gadget driver '%s'\n", driver->driver.name); - if (udc->transceiver) { + if (!IS_ERR_OR_NULL(udc->transceiver)) { retval = otg_set_peripheral(udc->transceiver->otg, &udc->gadget); if (retval) { @@ -1908,7 +1909,7 @@ static int pxa27x_udc_stop(struct usb_gadget_driver *driver) dev_info(udc->dev, "unregistered gadget driver '%s'\n", driver->driver.name); - if (udc->transceiver) + if (!IS_ERR_OR_NULL(udc->transceiver)) return otg_set_peripheral(udc->transceiver->otg, NULL); return 0; } @@ -2464,7 +2465,7 @@ static int __init pxa_udc_probe(struct platform_device *pdev) udc->dev = &pdev->dev; udc->mach = pdev->dev.platform_data; - udc->transceiver = usb_get_transceiver(); + udc->transceiver = usb_get_phy(USB_PHY_TYPE_USB2); gpio = udc->mach->gpio_pullup; if (gpio_is_valid(gpio)) { @@ -2543,7 +2544,7 @@ static int __exit pxa_udc_remove(struct platform_device *_dev) if (gpio_is_valid(gpio)) gpio_free(gpio); - usb_put_transceiver(udc->transceiver); + usb_put_phy(udc->transceiver); udc->transceiver = NULL; platform_set_drvdata(_dev, NULL); diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c index f4abb0ed987..b13e0bb5f5b 100644 --- a/drivers/usb/gadget/s3c-hsotg.c +++ b/drivers/usb/gadget/s3c-hsotg.c @@ -112,7 +112,6 @@ struct s3c_hsotg_ep { struct s3c_hsotg_req *req; struct dentry *debugfs; - spinlock_t lock; unsigned long total_data; unsigned int size_loaded; @@ -136,7 +135,6 @@ struct s3c_hsotg_ep { * @driver: USB gadget driver * @plat: The platform specific configuration data. * @regs: The memory area mapped for accessing registers. - * @regs_res: The resource that was allocated when claiming register space. * @irq: The IRQ number we are using * @supplies: Definition of USB power supplies * @dedicated_fifos: Set if the hardware has dedicated IN-EP fifos. @@ -157,8 +155,9 @@ struct s3c_hsotg { struct usb_gadget_driver *driver; struct s3c_hsotg_plat *plat; + spinlock_t lock; + void __iomem *regs; - struct resource *regs_res; int irq; struct clk *clk; @@ -896,7 +895,6 @@ static int s3c_hsotg_ep_queue(struct usb_ep *ep, struct usb_request *req, struct s3c_hsotg_req *hs_req = our_req(req); struct s3c_hsotg_ep *hs_ep = our_ep(ep); struct s3c_hsotg *hs = hs_ep->parent; - unsigned long irqflags; bool first; dev_dbg(hs->dev, "%s: req %p: %d@%p, noi=%d, zero=%d, snok=%d\n", @@ -915,19 +913,30 @@ static int s3c_hsotg_ep_queue(struct usb_ep *ep, struct usb_request *req, return ret; } - spin_lock_irqsave(&hs_ep->lock, irqflags); - first = list_empty(&hs_ep->queue); list_add_tail(&hs_req->queue, &hs_ep->queue); if (first) s3c_hsotg_start_req(hs, hs_ep, hs_req, false); - spin_unlock_irqrestore(&hs_ep->lock, irqflags); - return 0; } +static int s3c_hsotg_ep_queue_lock(struct usb_ep *ep, struct usb_request *req, + gfp_t gfp_flags) +{ + struct s3c_hsotg_ep *hs_ep = our_ep(ep); + struct s3c_hsotg *hs = hs_ep->parent; + unsigned long flags = 0; + int ret = 0; + + spin_lock_irqsave(&hs->lock, flags); + ret = s3c_hsotg_ep_queue(ep, req, gfp_flags); + spin_unlock_irqrestore(&hs->lock, flags); + + return ret; +} + static void s3c_hsotg_ep_free_request(struct usb_ep *ep, struct usb_request *req) { @@ -1383,9 +1392,9 @@ static void s3c_hsotg_complete_request(struct s3c_hsotg *hsotg, */ if (hs_req->req.complete) { - spin_unlock(&hs_ep->lock); + spin_unlock(&hsotg->lock); hs_req->req.complete(&hs_ep->ep, &hs_req->req); - spin_lock(&hs_ep->lock); + spin_lock(&hsotg->lock); } /* @@ -1404,28 +1413,6 @@ static void s3c_hsotg_complete_request(struct s3c_hsotg *hsotg, } /** - * s3c_hsotg_complete_request_lock - complete a request given to us (locked) - * @hsotg: The device state. - * @hs_ep: The endpoint the request was on. - * @hs_req: The request to complete. - * @result: The result code (0 => Ok, otherwise errno) - * - * See s3c_hsotg_complete_request(), but called with the endpoint's - * lock held. - */ -static void s3c_hsotg_complete_request_lock(struct s3c_hsotg *hsotg, - struct s3c_hsotg_ep *hs_ep, - struct s3c_hsotg_req *hs_req, - int result) -{ - unsigned long flags; - - spin_lock_irqsave(&hs_ep->lock, flags); - s3c_hsotg_complete_request(hsotg, hs_ep, hs_req, result); - spin_unlock_irqrestore(&hs_ep->lock, flags); -} - -/** * s3c_hsotg_rx_data - receive data from the FIFO for an endpoint * @hsotg: The device state. * @ep_idx: The endpoint index for the data @@ -1444,6 +1431,7 @@ static void s3c_hsotg_rx_data(struct s3c_hsotg *hsotg, int ep_idx, int size) int max_req; int read_ptr; + if (!hs_req) { u32 epctl = readl(hsotg->regs + DOEPCTL(ep_idx)); int ptr; @@ -1459,8 +1447,6 @@ static void s3c_hsotg_rx_data(struct s3c_hsotg *hsotg, int ep_idx, int size) return; } - spin_lock(&hs_ep->lock); - to_read = size; read_ptr = hs_req->req.actual; max_req = hs_req->req.length - read_ptr; @@ -1487,8 +1473,6 @@ static void s3c_hsotg_rx_data(struct s3c_hsotg *hsotg, int ep_idx, int size) * alignment of the data. */ readsl(fifo, hs_req->req.buf + read_ptr, to_read); - - spin_unlock(&hs_ep->lock); } /** @@ -1609,7 +1593,7 @@ static void s3c_hsotg_handle_outdone(struct s3c_hsotg *hsotg, s3c_hsotg_send_zlp(hsotg, hs_req); } - s3c_hsotg_complete_request_lock(hsotg, hs_ep, hs_req, result); + s3c_hsotg_complete_request(hsotg, hs_ep, hs_req, result); } /** @@ -1864,7 +1848,7 @@ static void s3c_hsotg_complete_in(struct s3c_hsotg *hsotg, /* Finish ZLP handling for IN EP0 transactions */ if (hsotg->eps[0].sent_zlp) { dev_dbg(hsotg->dev, "zlp packet received\n"); - s3c_hsotg_complete_request_lock(hsotg, hs_ep, hs_req, 0); + s3c_hsotg_complete_request(hsotg, hs_ep, hs_req, 0); return; } @@ -1915,7 +1899,7 @@ static void s3c_hsotg_complete_in(struct s3c_hsotg *hsotg, dev_dbg(hsotg->dev, "%s trying more for req...\n", __func__); s3c_hsotg_start_req(hsotg, hs_ep, hs_req, true); } else - s3c_hsotg_complete_request_lock(hsotg, hs_ep, hs_req, 0); + s3c_hsotg_complete_request(hsotg, hs_ep, hs_req, 0); } /** @@ -2123,9 +2107,6 @@ static void kill_all_requests(struct s3c_hsotg *hsotg, int result, bool force) { struct s3c_hsotg_req *req, *treq; - unsigned long flags; - - spin_lock_irqsave(&ep->lock, flags); list_for_each_entry_safe(req, treq, &ep->queue, queue) { /* @@ -2139,14 +2120,15 @@ static void kill_all_requests(struct s3c_hsotg *hsotg, s3c_hsotg_complete_request(hsotg, ep, req, result); } - - spin_unlock_irqrestore(&ep->lock, flags); } #define call_gadget(_hs, _entry) \ if ((_hs)->gadget.speed != USB_SPEED_UNKNOWN && \ - (_hs)->driver && (_hs)->driver->_entry) \ - (_hs)->driver->_entry(&(_hs)->gadget); + (_hs)->driver && (_hs)->driver->_entry) { \ + spin_unlock(&_hs->lock); \ + (_hs)->driver->_entry(&(_hs)->gadget); \ + spin_lock(&_hs->lock); \ + } /** * s3c_hsotg_disconnect - disconnect service @@ -2388,6 +2370,7 @@ static irqreturn_t s3c_hsotg_irq(int irq, void *pw) u32 gintsts; u32 gintmsk; + spin_lock(&hsotg->lock); irq_retry: gintsts = readl(hsotg->regs + GINTSTS); gintmsk = readl(hsotg->regs + GINTMSK); @@ -2557,6 +2540,8 @@ irq_retry: if (gintsts & IRQ_RETRY_MASK && --retry_count > 0) goto irq_retry; + spin_unlock(&hsotg->lock); + return IRQ_HANDLED; } @@ -2604,7 +2589,7 @@ static int s3c_hsotg_ep_enable(struct usb_ep *ep, dev_dbg(hsotg->dev, "%s: read DxEPCTL=0x%08x from 0x%08x\n", __func__, epctrl, epctrl_reg); - spin_lock_irqsave(&hs_ep->lock, flags); + spin_lock_irqsave(&hsotg->lock, flags); epctrl &= ~(DxEPCTL_EPType_MASK | DxEPCTL_MPS_MASK); epctrl |= DxEPCTL_MPS(mps); @@ -2683,7 +2668,7 @@ static int s3c_hsotg_ep_enable(struct usb_ep *ep, s3c_hsotg_ctrl_epint(hsotg, index, dir_in, 1); out: - spin_unlock_irqrestore(&hs_ep->lock, flags); + spin_unlock_irqrestore(&hsotg->lock, flags); return ret; } @@ -2710,10 +2695,10 @@ static int s3c_hsotg_ep_disable(struct usb_ep *ep) epctrl_reg = dir_in ? DIEPCTL(index) : DOEPCTL(index); + spin_lock_irqsave(&hsotg->lock, flags); /* terminate all requests with shutdown */ kill_all_requests(hsotg, hs_ep, -ESHUTDOWN, false); - spin_lock_irqsave(&hs_ep->lock, flags); ctrl = readl(hsotg->regs + epctrl_reg); ctrl &= ~DxEPCTL_EPEna; @@ -2726,7 +2711,7 @@ static int s3c_hsotg_ep_disable(struct usb_ep *ep) /* disable endpoint interrupts */ s3c_hsotg_ctrl_epint(hsotg, hs_ep->index, hs_ep->dir_in, 0); - spin_unlock_irqrestore(&hs_ep->lock, flags); + spin_unlock_irqrestore(&hsotg->lock, flags); return 0; } @@ -2761,15 +2746,15 @@ static int s3c_hsotg_ep_dequeue(struct usb_ep *ep, struct usb_request *req) dev_info(hs->dev, "ep_dequeue(%p,%p)\n", ep, req); - spin_lock_irqsave(&hs_ep->lock, flags); + spin_lock_irqsave(&hs->lock, flags); if (!on_list(hs_ep, hs_req)) { - spin_unlock_irqrestore(&hs_ep->lock, flags); + spin_unlock_irqrestore(&hs->lock, flags); return -EINVAL; } s3c_hsotg_complete_request(hs, hs_ep, hs_req, -ECONNRESET); - spin_unlock_irqrestore(&hs_ep->lock, flags); + spin_unlock_irqrestore(&hs->lock, flags); return 0; } @@ -2784,15 +2769,12 @@ static int s3c_hsotg_ep_sethalt(struct usb_ep *ep, int value) struct s3c_hsotg_ep *hs_ep = our_ep(ep); struct s3c_hsotg *hs = hs_ep->parent; int index = hs_ep->index; - unsigned long irqflags; u32 epreg; u32 epctl; u32 xfertype; dev_info(hs->dev, "%s(ep %p %s, %d)\n", __func__, ep, ep->name, value); - spin_lock_irqsave(&hs_ep->lock, irqflags); - /* write both IN and OUT control registers */ epreg = DIEPCTL(index); @@ -2827,19 +2809,36 @@ static int s3c_hsotg_ep_sethalt(struct usb_ep *ep, int value) writel(epctl, hs->regs + epreg); - spin_unlock_irqrestore(&hs_ep->lock, irqflags); - return 0; } +/** + * s3c_hsotg_ep_sethalt_lock - set halt on a given endpoint with lock held + * @ep: The endpoint to set halt. + * @value: Set or unset the halt. + */ +static int s3c_hsotg_ep_sethalt_lock(struct usb_ep *ep, int value) +{ + struct s3c_hsotg_ep *hs_ep = our_ep(ep); + struct s3c_hsotg *hs = hs_ep->parent; + unsigned long flags = 0; + int ret = 0; + + spin_lock_irqsave(&hs->lock, flags); + ret = s3c_hsotg_ep_sethalt(ep, value); + spin_unlock_irqrestore(&hs->lock, flags); + + return ret; +} + static struct usb_ep_ops s3c_hsotg_ep_ops = { .enable = s3c_hsotg_ep_enable, .disable = s3c_hsotg_ep_disable, .alloc_request = s3c_hsotg_ep_alloc_request, .free_request = s3c_hsotg_ep_free_request, - .queue = s3c_hsotg_ep_queue, + .queue = s3c_hsotg_ep_queue_lock, .dequeue = s3c_hsotg_ep_dequeue, - .set_halt = s3c_hsotg_ep_sethalt, + .set_halt = s3c_hsotg_ep_sethalt_lock, /* note, don't believe we have any call for the fifo routines */ }; @@ -2954,6 +2953,7 @@ static int s3c_hsotg_udc_start(struct usb_gadget *gadget, driver->driver.bus = NULL; hsotg->driver = driver; hsotg->gadget.dev.driver = &driver->driver; + hsotg->gadget.dev.of_node = hsotg->dev->of_node; hsotg->gadget.dev.dma_mask = hsotg->dev->dma_mask; hsotg->gadget.speed = USB_SPEED_UNKNOWN; @@ -2964,9 +2964,6 @@ static int s3c_hsotg_udc_start(struct usb_gadget *gadget, goto err; } - s3c_hsotg_phy_enable(hsotg); - - s3c_hsotg_core_init(hsotg); hsotg->last_rst = jiffies; dev_info(hsotg->dev, "bound driver %s\n", driver->driver.name); return 0; @@ -2988,6 +2985,7 @@ static int s3c_hsotg_udc_stop(struct usb_gadget *gadget, struct usb_gadget_driver *driver) { struct s3c_hsotg *hsotg = to_hsotg(gadget); + unsigned long flags = 0; int ep; if (!hsotg) @@ -3000,6 +2998,8 @@ static int s3c_hsotg_udc_stop(struct usb_gadget *gadget, for (ep = 0; ep < hsotg->num_of_eps; ep++) s3c_hsotg_ep_disable(&hsotg->eps[ep].ep); + spin_lock_irqsave(&hsotg->lock, flags); + s3c_hsotg_phy_disable(hsotg); regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies), hsotg->supplies); @@ -3007,6 +3007,8 @@ static int s3c_hsotg_udc_stop(struct usb_gadget *gadget, hsotg->gadget.speed = USB_SPEED_UNKNOWN; hsotg->gadget.dev.driver = NULL; + spin_unlock_irqrestore(&hsotg->lock, flags); + dev_info(hsotg->dev, "unregistered gadget driver '%s'\n", driver->driver.name); @@ -3024,10 +3026,40 @@ static int s3c_hsotg_gadget_getframe(struct usb_gadget *gadget) return s3c_hsotg_read_frameno(to_hsotg(gadget)); } +/** + * s3c_hsotg_pullup - connect/disconnect the USB PHY + * @gadget: The usb gadget state + * @is_on: Current state of the USB PHY + * + * Connect/Disconnect the USB PHY pullup + */ +static int s3c_hsotg_pullup(struct usb_gadget *gadget, int is_on) +{ + struct s3c_hsotg *hsotg = to_hsotg(gadget); + unsigned long flags = 0; + + dev_dbg(hsotg->dev, "%s: is_in: %d\n", __func__, is_on); + + spin_lock_irqsave(&hsotg->lock, flags); + if (is_on) { + s3c_hsotg_phy_enable(hsotg); + s3c_hsotg_core_init(hsotg); + } else { + s3c_hsotg_disconnect(hsotg); + s3c_hsotg_phy_disable(hsotg); + } + + hsotg->gadget.speed = USB_SPEED_UNKNOWN; + spin_unlock_irqrestore(&hsotg->lock, flags); + + return 0; +} + static struct usb_gadget_ops s3c_hsotg_gadget_ops = { .get_frame = s3c_hsotg_gadget_getframe, .udc_start = s3c_hsotg_udc_start, .udc_stop = s3c_hsotg_udc_stop, + .pullup = s3c_hsotg_pullup, }; /** @@ -3063,8 +3095,6 @@ static void __devinit s3c_hsotg_initep(struct s3c_hsotg *hsotg, INIT_LIST_HEAD(&hs_ep->queue); INIT_LIST_HEAD(&hs_ep->ep.ep_list); - spin_lock_init(&hs_ep->lock); - /* add to the list of endpoints known by the gadget driver */ if (epnum) list_add_tail(&hs_ep->ep.ep_list, &hsotg->gadget.ep_list); @@ -3342,7 +3372,7 @@ static int ep_show(struct seq_file *seq, void *v) seq_printf(seq, "request list (%p,%p):\n", ep->queue.next, ep->queue.prev); - spin_lock_irqsave(&ep->lock, flags); + spin_lock_irqsave(&hsotg->lock, flags); list_for_each_entry(req, &ep->queue, queue) { if (--show_limit < 0) { @@ -3357,7 +3387,7 @@ static int ep_show(struct seq_file *seq, void *v) req->req.actual, req->req.status); } - spin_unlock_irqrestore(&ep->lock, flags); + spin_unlock_irqrestore(&hsotg->lock, flags); return 0; } @@ -3477,7 +3507,7 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev) return -EINVAL; } - hsotg = kzalloc(sizeof(struct s3c_hsotg), GFP_KERNEL); + hsotg = devm_kzalloc(&pdev->dev, sizeof(struct s3c_hsotg), GFP_KERNEL); if (!hsotg) { dev_err(dev, "cannot get memory\n"); return -ENOMEM; @@ -3489,46 +3519,35 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev) hsotg->clk = clk_get(&pdev->dev, "otg"); if (IS_ERR(hsotg->clk)) { dev_err(dev, "cannot get otg clock\n"); - ret = PTR_ERR(hsotg->clk); - goto err_mem; + return PTR_ERR(hsotg->clk); } platform_set_drvdata(pdev, hsotg); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(dev, "cannot find register resource 0\n"); - ret = -EINVAL; - goto err_clk; - } - - hsotg->regs_res = request_mem_region(res->start, resource_size(res), - dev_name(dev)); - if (!hsotg->regs_res) { - dev_err(dev, "cannot reserve registers\n"); - ret = -ENOENT; - goto err_clk; - } - hsotg->regs = ioremap(res->start, resource_size(res)); + hsotg->regs = devm_request_and_ioremap(&pdev->dev, res); if (!hsotg->regs) { dev_err(dev, "cannot map registers\n"); ret = -ENXIO; - goto err_regs_res; + goto err_clk; } ret = platform_get_irq(pdev, 0); if (ret < 0) { dev_err(dev, "cannot find IRQ\n"); - goto err_regs; + goto err_clk; } + spin_lock_init(&hsotg->lock); + hsotg->irq = ret; - ret = request_irq(ret, s3c_hsotg_irq, 0, dev_name(dev), hsotg); + ret = devm_request_irq(&pdev->dev, hsotg->irq, s3c_hsotg_irq, 0, + dev_name(dev), hsotg); if (ret < 0) { dev_err(dev, "cannot claim IRQ\n"); - goto err_regs; + goto err_clk; } dev_info(dev, "regs %p, irq %d\n", hsotg->regs, hsotg->irq); @@ -3558,7 +3577,7 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev) hsotg->supplies); if (ret) { dev_err(dev, "failed to request supplies: %d\n", ret); - goto err_irq; + goto err_clk; } ret = regulator_bulk_enable(ARRAY_SIZE(hsotg->supplies), @@ -3642,19 +3661,11 @@ err_ep_mem: err_supplies: s3c_hsotg_phy_disable(hsotg); regulator_bulk_free(ARRAY_SIZE(hsotg->supplies), hsotg->supplies); -err_irq: - free_irq(hsotg->irq, hsotg); -err_regs: - iounmap(hsotg->regs); - -err_regs_res: - release_resource(hsotg->regs_res); - kfree(hsotg->regs_res); + err_clk: clk_disable_unprepare(hsotg->clk); clk_put(hsotg->clk); -err_mem: - kfree(hsotg); + return ret; } @@ -3675,12 +3686,6 @@ static int __devexit s3c_hsotg_remove(struct platform_device *pdev) usb_gadget_unregister_driver(hsotg->driver); } - free_irq(hsotg->irq, hsotg); - iounmap(hsotg->regs); - - release_resource(hsotg->regs_res); - kfree(hsotg->regs_res); - s3c_hsotg_phy_disable(hsotg); regulator_bulk_free(ARRAY_SIZE(hsotg->supplies), hsotg->supplies); diff --git a/drivers/usb/gadget/s3c-hsudc.c b/drivers/usb/gadget/s3c-hsudc.c index 236b271871a..e26a4e7ed2b 100644 --- a/drivers/usb/gadget/s3c-hsudc.c +++ b/drivers/usb/gadget/s3c-hsudc.c @@ -24,6 +24,7 @@ #include <linux/io.h> #include <linux/slab.h> #include <linux/clk.h> +#include <linux/err.h> #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> #include <linux/usb/otg.h> @@ -1165,7 +1166,7 @@ static int s3c_hsudc_start(struct usb_gadget *gadget, } /* connect to bus through transceiver */ - if (hsudc->transceiver) { + if (!IS_ERR_OR_NULL(hsudc->transceiver)) { ret = otg_set_peripheral(hsudc->transceiver->otg, &hsudc->gadget); if (ret) { @@ -1220,7 +1221,7 @@ static int s3c_hsudc_stop(struct usb_gadget *gadget, s3c_hsudc_stop_activity(hsudc); spin_unlock_irqrestore(&hsudc->lock, flags); - if (hsudc->transceiver) + if (!IS_ERR_OR_NULL(hsudc->transceiver)) (void) otg_set_peripheral(hsudc->transceiver->otg, NULL); disable_irq(hsudc->irq); @@ -1249,7 +1250,7 @@ static int s3c_hsudc_vbus_draw(struct usb_gadget *gadget, unsigned mA) if (!hsudc) return -ENODEV; - if (hsudc->transceiver) + if (!IS_ERR_OR_NULL(hsudc->transceiver)) return usb_phy_set_power(hsudc->transceiver, mA); return -EOPNOTSUPP; @@ -1282,7 +1283,7 @@ static int __devinit s3c_hsudc_probe(struct platform_device *pdev) hsudc->dev = dev; hsudc->pd = pdev->dev.platform_data; - hsudc->transceiver = usb_get_transceiver(); + hsudc->transceiver = usb_get_phy(USB_PHY_TYPE_USB2); for (i = 0; i < ARRAY_SIZE(hsudc->supplies); i++) hsudc->supplies[i].supply = s3c_hsudc_supply_names[i]; @@ -1385,8 +1386,8 @@ err_irq: err_remap: release_mem_region(res->start, resource_size(res)); err_res: - if (hsudc->transceiver) - usb_put_transceiver(hsudc->transceiver); + if (!IS_ERR_OR_NULL(hsudc->transceiver)) + usb_put_phy(hsudc->transceiver); regulator_bulk_free(ARRAY_SIZE(hsudc->supplies), hsudc->supplies); err_supplies: diff --git a/drivers/usb/gadget/storage_common.c b/drivers/usb/gadget/storage_common.c index 8081ca3a70a..ae8b18869b8 100644 --- a/drivers/usb/gadget/storage_common.c +++ b/drivers/usb/gadget/storage_common.c @@ -38,12 +38,6 @@ */ /* - * When FSG_BUFFHD_STATIC_BUFFER is defined when this file is included - * the fsg_buffhd structure's buf field will be an array of FSG_BUFLEN - * characters rather then a pointer to void. - */ - -/* * When USB_GADGET_DEBUG_FILES is defined the module param num_buffers * sets the number of pipeline buffers (length of the fsg_buffhd array). * The valid range of num_buffers is: num >= 2 && num <= 4. @@ -260,11 +254,7 @@ enum fsg_buffer_state { }; struct fsg_buffhd { -#ifdef FSG_BUFFHD_STATIC_BUFFER - char buf[FSG_BUFLEN]; -#else void *buf; -#endif enum fsg_buffer_state state; struct fsg_buffhd *next; @@ -627,6 +617,16 @@ static struct usb_gadget_strings fsg_stringtab = { * the caller must own fsg->filesem for writing. */ +static void fsg_lun_close(struct fsg_lun *curlun) +{ + if (curlun->filp) { + LDBG(curlun, "close backing file\n"); + fput(curlun->filp); + curlun->filp = NULL; + } +} + + static int fsg_lun_open(struct fsg_lun *curlun, const char *filename) { int ro; @@ -636,6 +636,8 @@ static int fsg_lun_open(struct fsg_lun *curlun, const char *filename) loff_t size; loff_t num_sectors; loff_t min_sectors; + unsigned int blkbits; + unsigned int blksize; /* R/W if we can, R/O if we must */ ro = curlun->initially_ro; @@ -680,17 +682,17 @@ static int fsg_lun_open(struct fsg_lun *curlun, const char *filename) } if (curlun->cdrom) { - curlun->blksize = 2048; - curlun->blkbits = 11; + blksize = 2048; + blkbits = 11; } else if (inode->i_bdev) { - curlun->blksize = bdev_logical_block_size(inode->i_bdev); - curlun->blkbits = blksize_bits(curlun->blksize); + blksize = bdev_logical_block_size(inode->i_bdev); + blkbits = blksize_bits(blksize); } else { - curlun->blksize = 512; - curlun->blkbits = 9; + blksize = 512; + blkbits = 9; } - num_sectors = size >> curlun->blkbits; /* File size in logic-block-size blocks */ + num_sectors = size >> blkbits; /* File size in logic-block-size blocks */ min_sectors = 1; if (curlun->cdrom) { min_sectors = 300; /* Smallest track is 300 frames */ @@ -707,7 +709,12 @@ static int fsg_lun_open(struct fsg_lun *curlun, const char *filename) goto out; } + if (fsg_lun_is_open(curlun)) + fsg_lun_close(curlun); + get_file(filp); + curlun->blksize = blksize; + curlun->blkbits = blkbits; curlun->ro = ro; curlun->filp = filp; curlun->file_length = size; @@ -721,16 +728,6 @@ out: } -static void fsg_lun_close(struct fsg_lun *curlun) -{ - if (curlun->filp) { - LDBG(curlun, "close backing file\n"); - fput(curlun->filp); - curlun->filp = NULL; - } -} - - /*-------------------------------------------------------------------------*/ /* @@ -881,19 +878,17 @@ static ssize_t fsg_store_file(struct device *dev, struct device_attribute *attr, if (count > 0 && buf[count-1] == '\n') ((char *) buf)[count-1] = 0; /* Ugh! */ - /* Eject current medium */ - down_write(filesem); - if (fsg_lun_is_open(curlun)) { - fsg_lun_close(curlun); - curlun->unit_attention_data = SS_MEDIUM_NOT_PRESENT; - } - /* Load new medium */ + down_write(filesem); if (count > 0 && buf[0]) { + /* fsg_lun_open() will close existing file if any. */ rc = fsg_lun_open(curlun, buf); if (rc == 0) curlun->unit_attention_data = SS_NOT_READY_TO_READY_TRANSITION; + } else if (fsg_lun_is_open(curlun)) { + fsg_lun_close(curlun); + curlun->unit_attention_data = SS_MEDIUM_NOT_PRESENT; } up_write(filesem); return (rc < 0 ? rc : count); diff --git a/drivers/usb/gadget/u_ether.c b/drivers/usb/gadget/u_ether.c index b9e1925b2df..90e82e288eb 100644 --- a/drivers/usb/gadget/u_ether.c +++ b/drivers/usb/gadget/u_ether.c @@ -798,12 +798,6 @@ int gether_setup_name(struct usb_gadget *g, u8 ethaddr[ETH_ALEN], SET_ETHTOOL_OPS(net, &ops); - /* two kinds of host-initiated state changes: - * - iff DATA transfer is active, carrier is "on" - * - tx queueing enabled if open *and* carrier is "on" - */ - netif_carrier_off(net); - dev->gadget = g; SET_NETDEV_DEV(net, &g->dev); SET_NETDEV_DEVTYPE(net, &gadget_type); @@ -817,6 +811,12 @@ int gether_setup_name(struct usb_gadget *g, u8 ethaddr[ETH_ALEN], INFO(dev, "HOST MAC %pM\n", dev->host_mac); the_dev = dev; + + /* two kinds of host-initiated state changes: + * - iff DATA transfer is active, carrier is "on" + * - tx queueing enabled if open *and* carrier is "on" + */ + netif_carrier_off(net); } return status; diff --git a/drivers/usb/gadget/uvc.h b/drivers/usb/gadget/uvc.h index ca4e03a1c73..93b0c119111 100644 --- a/drivers/usb/gadget/uvc.h +++ b/drivers/usb/gadget/uvc.h @@ -153,9 +153,11 @@ struct uvc_device /* Descriptors */ struct { - const struct uvc_descriptor_header * const *control; + const struct uvc_descriptor_header * const *fs_control; + const struct uvc_descriptor_header * const *ss_control; const struct uvc_descriptor_header * const *fs_streaming; const struct uvc_descriptor_header * const *hs_streaming; + const struct uvc_descriptor_header * const *ss_streaming; } desc; unsigned int control_intf; diff --git a/drivers/usb/gadget/webcam.c b/drivers/usb/gadget/webcam.c index 668fe128f2e..120e134e805 100644 --- a/drivers/usb/gadget/webcam.c +++ b/drivers/usb/gadget/webcam.c @@ -272,7 +272,15 @@ static const struct uvc_color_matching_descriptor uvc_color_matching = { .bMatrixCoefficients = 4, }; -static const struct uvc_descriptor_header * const uvc_control_cls[] = { +static const struct uvc_descriptor_header * const uvc_fs_control_cls[] = { + (const struct uvc_descriptor_header *) &uvc_control_header, + (const struct uvc_descriptor_header *) &uvc_camera_terminal, + (const struct uvc_descriptor_header *) &uvc_processing, + (const struct uvc_descriptor_header *) &uvc_output_terminal, + NULL, +}; + +static const struct uvc_descriptor_header * const uvc_ss_control_cls[] = { (const struct uvc_descriptor_header *) &uvc_control_header, (const struct uvc_descriptor_header *) &uvc_camera_terminal, (const struct uvc_descriptor_header *) &uvc_processing, @@ -304,6 +312,18 @@ static const struct uvc_descriptor_header * const uvc_hs_streaming_cls[] = { NULL, }; +static const struct uvc_descriptor_header * const uvc_ss_streaming_cls[] = { + (const struct uvc_descriptor_header *) &uvc_input_header, + (const struct uvc_descriptor_header *) &uvc_format_yuv, + (const struct uvc_descriptor_header *) &uvc_frame_yuv_360p, + (const struct uvc_descriptor_header *) &uvc_frame_yuv_720p, + (const struct uvc_descriptor_header *) &uvc_format_mjpg, + (const struct uvc_descriptor_header *) &uvc_frame_mjpg_360p, + (const struct uvc_descriptor_header *) &uvc_frame_mjpg_720p, + (const struct uvc_descriptor_header *) &uvc_color_matching, + NULL, +}; + /* -------------------------------------------------------------------------- * USB configuration */ @@ -311,8 +331,9 @@ static const struct uvc_descriptor_header * const uvc_hs_streaming_cls[] = { static int __init webcam_config_bind(struct usb_configuration *c) { - return uvc_bind_config(c, uvc_control_cls, uvc_fs_streaming_cls, - uvc_hs_streaming_cls); + return uvc_bind_config(c, uvc_fs_control_cls, uvc_ss_control_cls, + uvc_fs_streaming_cls, uvc_hs_streaming_cls, + uvc_ss_streaming_cls); } static struct usb_configuration webcam_config_driver = { @@ -373,7 +394,7 @@ static struct usb_composite_driver webcam_driver = { .name = "g_webcam", .dev = &webcam_device_descriptor, .strings = webcam_device_strings, - .max_speed = USB_SPEED_HIGH, + .max_speed = USB_SPEED_SUPER, .unbind = webcam_unbind, }; |