1 files changed, 205 insertions, 164 deletions

diff --git a/drivers/usb/host/ehci-au1xxx.c b/drivers/usb/host/ehci-au1xxx.c
index 08a4335401a..bf69f473910 100644
--- a/drivers/usb/host/ehci-au1xxx.c
+++ b/drivers/usb/host/ehci-au1xxx.c
@@ -19,263 +19,304 @@
 #define USB_MCFG_RDCOMB   (1<<30)
 #define USB_MCFG_SSDEN    (1<<23)
 #define USB_MCFG_PHYPLLEN (1<<19)
+#define USB_MCFG_UCECLKEN (1<<18)
 #define USB_MCFG_EHCCLKEN (1<<17)
+#ifdef CONFIG_DMA_COHERENT
 #define USB_MCFG_UCAM     (1<<7)
+#else
+#define USB_MCFG_UCAM     (0)
+#endif
 #define USB_MCFG_EBMEN    (1<<3)
 #define USB_MCFG_EMEMEN   (1<<2)
 
-#define USBH_ENABLE_CE    (USB_MCFG_PHYPLLEN | USB_MCFG_EHCCLKEN)
+#define USBH_ENABLE_CE	(USB_MCFG_PHYPLLEN | USB_MCFG_EHCCLKEN)
+#define USBH_ENABLE_INIT (USB_MCFG_PFEN  | USB_MCFG_RDCOMB |	\
+			  USBH_ENABLE_CE | USB_MCFG_SSDEN  |	\
+			  USB_MCFG_UCAM  | USB_MCFG_EBMEN  |	\
+			  USB_MCFG_EMEMEN)
 
-#ifdef CONFIG_DMA_COHERENT
-#define USBH_ENABLE_INIT  (USBH_ENABLE_CE \
-                         | USB_MCFG_PFEN | USB_MCFG_RDCOMB \
-                         | USB_MCFG_SSDEN | USB_MCFG_UCAM \
-                         | USB_MCFG_EBMEN | USB_MCFG_EMEMEN)
-#else
-#define USBH_ENABLE_INIT  (USBH_ENABLE_CE \
-                         | USB_MCFG_PFEN | USB_MCFG_RDCOMB \
-                         | USB_MCFG_SSDEN \
-                         | USB_MCFG_EBMEN | USB_MCFG_EMEMEN)
-#endif
 #define USBH_DISABLE      (USB_MCFG_EBMEN | USB_MCFG_EMEMEN)
 
 extern int usb_disabled(void);
 
-/*-------------------------------------------------------------------------*/
-
-static void au1xxx_start_ehc(struct platform_device *dev)
+static void au1xxx_start_ehc(void)
 {
-	pr_debug(__FILE__ ": starting Au1xxx EHCI USB Controller\n");
-
-	/* write HW defaults again in case Yamon cleared them */
-	if (au_readl(USB_HOST_CONFIG) == 0) {
-		au_writel(0x00d02000, USB_HOST_CONFIG);
-		au_readl(USB_HOST_CONFIG);
-		udelay(1000);
-	}
-	/* enable host controller */
-	au_writel(USBH_ENABLE_CE | au_readl(USB_HOST_CONFIG), USB_HOST_CONFIG);
-	au_readl(USB_HOST_CONFIG);
-	udelay(1000);
-	au_writel(USBH_ENABLE_INIT | au_readl(USB_HOST_CONFIG),
-		  USB_HOST_CONFIG);
-	au_readl(USB_HOST_CONFIG);
+	/* enable clock to EHCI block and HS PHY PLL*/
+	au_writel(au_readl(USB_HOST_CONFIG) | USBH_ENABLE_CE, USB_HOST_CONFIG);
+	au_sync();
 	udelay(1000);
 
-	pr_debug(__FILE__ ": Clock to USB host has been enabled\n");
+	/* enable EHCI mmio */
+	au_writel(au_readl(USB_HOST_CONFIG) | USBH_ENABLE_INIT, USB_HOST_CONFIG);
+	au_sync();
+	udelay(1000);
 }
 
-static void au1xxx_stop_ehc(struct platform_device *dev)
+static void au1xxx_stop_ehc(void)
 {
-	pr_debug(__FILE__ ": stopping Au1xxx EHCI USB Controller\n");
+	unsigned long c;
 
 	/* Disable mem */
-	au_writel(~USBH_DISABLE & au_readl(USB_HOST_CONFIG), USB_HOST_CONFIG);
+	au_writel(au_readl(USB_HOST_CONFIG) & ~USBH_DISABLE, USB_HOST_CONFIG);
+	au_sync();
 	udelay(1000);
-	/* Disable clock */
-	au_writel(~USB_MCFG_EHCCLKEN & au_readl(USB_HOST_CONFIG),
-		  USB_HOST_CONFIG);
-	au_readl(USB_HOST_CONFIG);
+
+	/* Disable EHC clock. If the HS PHY is unused disable it too. */
+	c = au_readl(USB_HOST_CONFIG) & ~USB_MCFG_EHCCLKEN;
+	if (!(c & USB_MCFG_UCECLKEN))		/* UDC disabled? */
+		c &= ~USB_MCFG_PHYPLLEN;	/* yes: disable HS PHY PLL */
+	au_writel(c, USB_HOST_CONFIG);
+	au_sync();
 }
 
-/*-------------------------------------------------------------------------*/
+static const struct hc_driver ehci_au1xxx_hc_driver = {
+	.description		= hcd_name,
+	.product_desc		= "Au1xxx EHCI",
+	.hcd_priv_size		= sizeof(struct ehci_hcd),
+
+	/*
+	 * generic hardware linkage
+	 */
+	.irq			= ehci_irq,
+	.flags			= HCD_MEMORY | HCD_USB2,
+
+	/*
+	 * basic lifecycle operations
+	 *
+	 * FIXME -- ehci_init() doesn't do enough here.
+	 * See ehci-ppc-soc for a complete implementation.
+	 */
+	.reset			= ehci_init,
+	.start			= ehci_run,
+	.stop			= ehci_stop,
+	.shutdown		= ehci_shutdown,
 
-/* configure so an HC device and id are always provided */
-/* always called with process context; sleeping is OK */
+	/*
+	 * managing i/o requests and associated device resources
+	 */
+	.urb_enqueue		= ehci_urb_enqueue,
+	.urb_dequeue		= ehci_urb_dequeue,
+	.endpoint_disable	= ehci_endpoint_disable,
 
-/**
- * usb_ehci_au1xxx_probe - initialize Au1xxx-based HCDs
- * Context: !in_interrupt()
- *
- * Allocates basic resources for this USB host controller, and
- * then invokes the start() method for the HCD associated with it
- * through the hotplug entry's driver_data.
- *
- */
-int usb_ehci_au1xxx_probe(const struct hc_driver *driver,
-			  struct usb_hcd **hcd_out, struct platform_device *dev)
+	/*
+	 * scheduling support
+	 */
+	.get_frame_number	= ehci_get_frame,
+
+	/*
+	 * root hub support
+	 */
+	.hub_status_data	= ehci_hub_status_data,
+	.hub_control		= ehci_hub_control,
+	.bus_suspend		= ehci_bus_suspend,
+	.bus_resume		= ehci_bus_resume,
+	.relinquish_port	= ehci_relinquish_port,
+	.port_handed_over	= ehci_port_handed_over,
+};
+
+static int ehci_hcd_au1xxx_drv_probe(struct platform_device *pdev)
 {
-	int retval;
 	struct usb_hcd *hcd;
 	struct ehci_hcd *ehci;
+	int ret;
 
-#if defined(CONFIG_SOC_AU1200) && defined(CONFIG_DMA_COHERENT)
+	if (usb_disabled())
+		return -ENODEV;
 
+#if defined(CONFIG_SOC_AU1200) && defined(CONFIG_DMA_COHERENT)
 	/* Au1200 AB USB does not support coherent memory */
 	if (!(read_c0_prid() & 0xff)) {
-		pr_info("%s: this is chip revision AB!\n", dev->name);
-		pr_info("%s: update your board or re-configure the kernel\n",
-			dev->name);
+		printk(KERN_INFO "%s: this is chip revision AB!\n", pdev->name);
+		printk(KERN_INFO "%s: update your board or re-configure"
+				 " the kernel\n", pdev->name);
 		return -ENODEV;
 	}
 #endif
 
-	au1xxx_start_ehc(dev);
-
-	if (dev->resource[1].flags != IORESOURCE_IRQ) {
+	if (pdev->resource[1].flags != IORESOURCE_IRQ) {
 		pr_debug("resource[1] is not IORESOURCE_IRQ");
-		retval = -ENOMEM;
+		return -ENOMEM;
 	}
-	hcd = usb_create_hcd(driver, &dev->dev, "Au1xxx");
+	hcd = usb_create_hcd(&ehci_au1xxx_hc_driver, &pdev->dev, "Au1xxx");
 	if (!hcd)
 		return -ENOMEM;
-	hcd->rsrc_start = dev->resource[0].start;
-	hcd->rsrc_len = dev->resource[0].end - dev->resource[0].start + 1;
+
+	hcd->rsrc_start = pdev->resource[0].start;
+	hcd->rsrc_len = pdev->resource[0].end - pdev->resource[0].start + 1;
 
 	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
 		pr_debug("request_mem_region failed");
-		retval = -EBUSY;
+		ret = -EBUSY;
 		goto err1;
 	}
 
 	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
 	if (!hcd->regs) {
 		pr_debug("ioremap failed");
-		retval = -ENOMEM;
+		ret = -ENOMEM;
 		goto err2;
 	}
 
+	au1xxx_start_ehc();
+
 	ehci = hcd_to_ehci(hcd);
 	ehci->caps = hcd->regs;
 	ehci->regs = hcd->regs + HC_LENGTH(readl(&ehci->caps->hc_capbase));
 	/* cache this readonly data; minimize chip reads */
 	ehci->hcs_params = readl(&ehci->caps->hcs_params);
 
-	/* ehci_hcd_init(hcd_to_ehci(hcd)); */
-
-	retval =
-	    usb_add_hcd(hcd, dev->resource[1].start, IRQF_DISABLED | IRQF_SHARED);
-	if (retval == 0)
-		return retval;
+	ret = usb_add_hcd(hcd, pdev->resource[1].start,
+			  IRQF_DISABLED | IRQF_SHARED);
+	if (ret == 0) {
+		platform_set_drvdata(pdev, hcd);
+		return ret;
+	}
 
-	au1xxx_stop_ehc(dev);
+	au1xxx_stop_ehc();
 	iounmap(hcd->regs);
 err2:
 	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 err1:
 	usb_put_hcd(hcd);
-	return retval;
+	return ret;
 }
 
-/* may be called without controller electrically present */
-/* may be called with controller, bus, and devices active */
-
-/**
- * usb_ehci_hcd_au1xxx_remove - shutdown processing for Au1xxx-based HCDs
- * @dev: USB Host Controller being removed
- * Context: !in_interrupt()
- *
- * Reverses the effect of usb_ehci_hcd_au1xxx_probe(), first invoking
- * the HCD's stop() method.  It is always called from a thread
- * context, normally "rmmod", "apmd", or something similar.
- *
- */
-void usb_ehci_au1xxx_remove(struct usb_hcd *hcd, struct platform_device *dev)
+static int ehci_hcd_au1xxx_drv_remove(struct platform_device *pdev)
 {
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+
 	usb_remove_hcd(hcd);
 	iounmap(hcd->regs);
 	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 	usb_put_hcd(hcd);
-	au1xxx_stop_ehc(dev);
+	au1xxx_stop_ehc();
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
 }
 
-/*-------------------------------------------------------------------------*/
+#ifdef CONFIG_PM
+static int ehci_hcd_au1xxx_drv_suspend(struct platform_device *pdev,
+					pm_message_t message)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+	unsigned long flags;
+	int rc;
 
-static const struct hc_driver ehci_au1xxx_hc_driver = {
-	.description = hcd_name,
-	.product_desc = "Au1xxx EHCI",
-	.hcd_priv_size = sizeof(struct ehci_hcd),
+	return 0;
+	rc = 0;
 
-	/*
-	 * generic hardware linkage
-	 */
-	.irq = ehci_irq,
-	.flags = HCD_MEMORY | HCD_USB2,
+	if (time_before(jiffies, ehci->next_statechange))
+		msleep(10);
 
-	/*
-	 * basic lifecycle operations
+	/* Root hub was already suspended. Disable irq emission and
+	 * mark HW unaccessible, bail out if RH has been resumed. Use
+	 * the spinlock to properly synchronize with possible pending
+	 * RH suspend or resume activity.
 	 *
-	 * FIXME -- ehci_init() doesn't do enough here.
-	 * See ehci-ppc-soc for a complete implementation.
-	 */
-	.reset = ehci_init,
-	.start = ehci_run,
-	.stop = ehci_stop,
-	.shutdown = ehci_shutdown,
-
-	/*
-	 * managing i/o requests and associated device resources
+	 * This is still racy as hcd->state is manipulated outside of
+	 * any locks =P But that will be a different fix.
 	 */
-	.urb_enqueue = ehci_urb_enqueue,
-	.urb_dequeue = ehci_urb_dequeue,
-	.endpoint_disable = ehci_endpoint_disable,
+	spin_lock_irqsave(&ehci->lock, flags);
+	if (hcd->state != HC_STATE_SUSPENDED) {
+		rc = -EINVAL;
+		goto bail;
+	}
+	ehci_writel(ehci, 0, &ehci->regs->intr_enable);
+	(void)ehci_readl(ehci, &ehci->regs->intr_enable);
 
-	/*
-	 * scheduling support
-	 */
-	.get_frame_number = ehci_get_frame,
+	/* make sure snapshot being resumed re-enumerates everything */
+	if (message.event == PM_EVENT_PRETHAW) {
+		ehci_halt(ehci);
+		ehci_reset(ehci);
+	}
 
-	/*
-	 * root hub support
-	 */
-	.hub_status_data = ehci_hub_status_data,
-	.hub_control = ehci_hub_control,
-	.bus_suspend = ehci_bus_suspend,
-	.bus_resume = ehci_bus_resume,
-	.relinquish_port = ehci_relinquish_port,
-	.port_handed_over = ehci_port_handed_over,
-};
+	clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
 
-/*-------------------------------------------------------------------------*/
+	au1xxx_stop_ehc();
 
-static int ehci_hcd_au1xxx_drv_probe(struct platform_device *pdev)
-{
-	struct usb_hcd *hcd = NULL;
-	int ret;
+bail:
+	spin_unlock_irqrestore(&ehci->lock, flags);
 
-	pr_debug("In ehci_hcd_au1xxx_drv_probe\n");
+	// could save FLADJ in case of Vaux power loss
+	// ... we'd only use it to handle clock skew
 
-	if (usb_disabled())
-		return -ENODEV;
-
-	/* FIXME we only want one one probe() not two */
-	ret = usb_ehci_au1xxx_probe(&ehci_au1xxx_hc_driver, &hcd, pdev);
-	return ret;
+	return rc;
 }
 
-static int ehci_hcd_au1xxx_drv_remove(struct platform_device *pdev)
+
+static int ehci_hcd_au1xxx_drv_resume(struct platform_device *pdev)
 {
 	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
 
-	/* FIXME we only want one one remove() not two */
-	usb_ehci_au1xxx_remove(hcd, pdev);
-	return 0;
-}
+	au1xxx_start_ehc();
 
- /*TBD*/
-/*static int ehci_hcd_au1xxx_drv_suspend(struct device *dev)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	struct usb_hcd *hcd = dev_get_drvdata(dev);
+	// maybe restore FLADJ
 
-	return 0;
-}
-static int ehci_hcd_au1xxx_drv_resume(struct device *dev)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	struct usb_hcd *hcd = dev_get_drvdata(dev);
+	if (time_before(jiffies, ehci->next_statechange))
+		msleep(100);
+
+	/* Mark hardware accessible again as we are out of D3 state by now */
+	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+
+	/* If CF is still set, we maintained PCI Vaux power.
+	 * Just undo the effect of ehci_pci_suspend().
+	 */
+	if (ehci_readl(ehci, &ehci->regs->configured_flag) == FLAG_CF) {
+		int	mask = INTR_MASK;
+
+		if (!hcd->self.root_hub->do_remote_wakeup)
+			mask &= ~STS_PCD;
+		ehci_writel(ehci, mask, &ehci->regs->intr_enable);
+		ehci_readl(ehci, &ehci->regs->intr_enable);
+		return 0;
+	}
+
+	ehci_dbg(ehci, "lost power, restarting\n");
+	usb_root_hub_lost_power(hcd->self.root_hub);
+
+	/* Else reset, to cope with power loss or flush-to-storage
+	 * style "resume" having let BIOS kick in during reboot.
+	 */
+	(void) ehci_halt(ehci);
+	(void) ehci_reset(ehci);
+
+	/* emptying the schedule aborts any urbs */
+	spin_lock_irq(&ehci->lock);
+	if (ehci->reclaim)
+		end_unlink_async(ehci);
+	ehci_work(ehci);
+	spin_unlock_irq(&ehci->lock);
+
+	ehci_writel(ehci, ehci->command, &ehci->regs->command);
+	ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag);
+	ehci_readl(ehci, &ehci->regs->command);	/* unblock posted writes */
+
+	/* here we "know" root ports should always stay powered */
+	ehci_port_power(ehci, 1);
+
+	hcd->state = HC_STATE_SUSPENDED;
 
 	return 0;
 }
-*/
-MODULE_ALIAS("platform:au1xxx-ehci");
+
+#else
+#define ehci_hcd_au1xxx_drv_suspend NULL
+#define ehci_hcd_au1xxx_drv_resume NULL
+#endif
+
 static struct platform_driver ehci_hcd_au1xxx_driver = {
-	.probe = ehci_hcd_au1xxx_drv_probe,
-	.remove = ehci_hcd_au1xxx_drv_remove,
-	.shutdown = usb_hcd_platform_shutdown,
-	/*.suspend      = ehci_hcd_au1xxx_drv_suspend, */
-	/*.resume       = ehci_hcd_au1xxx_drv_resume, */
+	.probe		= ehci_hcd_au1xxx_drv_probe,
+	.remove		= ehci_hcd_au1xxx_drv_remove,
+	.shutdown	= usb_hcd_platform_shutdown,
+	.suspend	= ehci_hcd_au1xxx_drv_suspend,
+	.resume		= ehci_hcd_au1xxx_drv_resume,
 	.driver = {
-		.name = "au1xxx-ehci",
+		.name	= "au1xxx-ehci",
+		.owner	= THIS_MODULE,
 	}
 };
+
+MODULE_ALIAS("platform:au1xxx-ehci");