diff options
Diffstat (limited to 'drivers/usb/host/ehci-hcd.c')
| -rw-r--r-- | drivers/usb/host/ehci-hcd.c | 38 |
1 files changed, 25 insertions, 13 deletions
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 4a3bc5b7a06..800be38c78b 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -226,8 +226,13 @@ static int ehci_halt (struct ehci_hcd *ehci) if ((temp & STS_HALT) != 0) return 0; + /* + * This routine gets called during probe before ehci->command + * has been initialized, so we can't rely on its value. + */ + ehci->command &= ~CMD_RUN; temp = ehci_readl(ehci, &ehci->regs->command); - temp &= ~CMD_RUN; + temp &= ~(CMD_RUN | CMD_IAAD); ehci_writel(ehci, temp, &ehci->regs->command); return handshake (ehci, &ehci->regs->status, STS_HALT, STS_HALT, 16 * 125); @@ -363,16 +368,14 @@ static void ehci_quiesce (struct ehci_hcd *ehci) #endif /* wait for any schedule enables/disables to take effect */ - temp = ehci_readl(ehci, &ehci->regs->command) << 10; - temp &= STS_ASS | STS_PSS; + temp = (ehci->command << 10) & (STS_ASS | STS_PSS); if (handshake_on_error_set_halt(ehci, &ehci->regs->status, STS_ASS | STS_PSS, temp, 16 * 125)) return; /* then disable anything that's still active */ - temp = ehci_readl(ehci, &ehci->regs->command); - temp &= ~(CMD_ASE | CMD_IAAD | CMD_PSE); - ehci_writel(ehci, temp, &ehci->regs->command); + ehci->command &= ~(CMD_ASE | CMD_PSE); + ehci_writel(ehci, ehci->command, &ehci->regs->command); /* hardware can take 16 microframes to turn off ... */ handshake_on_error_set_halt(ehci, &ehci->regs->status, @@ -417,9 +420,6 @@ static void ehci_iaa_watchdog(unsigned long param) * CMD_IAAD when it sets STS_IAA.) */ cmd = ehci_readl(ehci, &ehci->regs->command); - if (cmd & CMD_IAAD) - ehci_writel(ehci, cmd & ~CMD_IAAD, - &ehci->regs->command); /* If IAA is set here it either legitimately triggered * before we cleared IAAD above (but _way_ late, so we'll @@ -671,7 +671,9 @@ static int ehci_init(struct usb_hcd *hcd) hw = ehci->async->hw; hw->hw_next = QH_NEXT(ehci, ehci->async->qh_dma); hw->hw_info1 = cpu_to_hc32(ehci, QH_HEAD); +#if defined(CONFIG_PPC_PS3) hw->hw_info1 |= cpu_to_hc32(ehci, (1 << 7)); /* I = 1 */ +#endif hw->hw_token = cpu_to_hc32(ehci, QTD_STS_HALT); hw->hw_qtd_next = EHCI_LIST_END(ehci); ehci->async->qh_state = QH_STATE_LINKED; @@ -894,11 +896,8 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd) /* complete the unlinking of some qh [4.15.2.3] */ if (status & STS_IAA) { /* guard against (alleged) silicon errata */ - if (cmd & CMD_IAAD) { - ehci_writel(ehci, cmd & ~CMD_IAAD, - &ehci->regs->command); + if (cmd & CMD_IAAD) ehci_dbg(ehci, "IAA with IAAD still set?\n"); - } if (ehci->reclaim) { COUNT(ehci->stats.reclaim); end_unlink_async(ehci); @@ -1248,6 +1247,13 @@ static int ehci_get_frame (struct usb_hcd *hcd) } /*-------------------------------------------------------------------------*/ +/* + * The EHCI in ChipIdea HDRC cannot be a separate module or device, + * because its registers (and irq) are shared between host/gadget/otg + * functions and in order to facilitate role switching we cannot + * give the ehci driver exclusive access to those. + */ +#ifndef CHIPIDEA_EHCI MODULE_DESCRIPTION(DRIVER_DESC); MODULE_AUTHOR (DRIVER_AUTHOR); @@ -1378,6 +1384,11 @@ MODULE_LICENSE ("GPL"); #define PLATFORM_DRIVER ehci_ls1x_driver #endif +#ifdef CONFIG_MIPS_SEAD3 +#include "ehci-sead3.c" +#define PLATFORM_DRIVER ehci_hcd_sead3_driver +#endif + #ifdef CONFIG_USB_EHCI_HCD_PLATFORM #include "ehci-platform.c" #define PLATFORM_DRIVER ehci_platform_driver @@ -1501,3 +1512,4 @@ static void __exit ehci_hcd_cleanup(void) } module_exit(ehci_hcd_cleanup); +#endif /* CHIPIDEA_EHCI */ |