diff options
Diffstat (limited to 'drivers/usb/host/ehci-hub.c')
| -rw-r--r-- | drivers/usb/host/ehci-hub.c | 20 |
1 files changed, 18 insertions, 2 deletions
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index 9ab4a4d9768..2b702772d04 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -42,6 +42,12 @@ static int ehci_hub_control( u16 wLength ); +static int persist_enabled_on_companion(struct usb_device *udev, void *unused) +{ + return !udev->maxchild && udev->persist_enabled && + udev->bus->root_hub->speed < USB_SPEED_HIGH; +} + /* After a power loss, ports that were owned by the companion must be * reset so that the companion can still own them. */ @@ -56,6 +62,16 @@ static void ehci_handover_companion_ports(struct ehci_hcd *ehci) if (!ehci->owned_ports) return; + /* + * USB 1.1 devices are mostly HIDs, which don't need to persist across + * suspends. If we ensure that none of our companion's devices have + * persist_enabled (by looking through all USB 1.1 buses in the system), + * we can skip this and avoid slowing resume down. Devices without + * persist will just get reenumerated shortly after resume anyway. + */ + if (!usb_for_each_dev(NULL, persist_enabled_on_companion)) + return; + /* Make sure the ports are powered */ port = HCS_N_PORTS(ehci->hcs_params); while (port--) { @@ -876,7 +892,7 @@ static int ehci_hub_control ( PORT_SUSPEND | PORT_RESUME); ehci_writel(ehci, temp, status_reg); clear_bit(wIndex, &ehci->resuming_ports); - retval = handshake(ehci, status_reg, + retval = ehci_handshake(ehci, status_reg, PORT_RESUME, 0, 2000 /* 2msec */); if (retval != 0) { ehci_err(ehci, @@ -902,7 +918,7 @@ static int ehci_hub_control ( /* REVISIT: some hardware needs 550+ usec to clear * this bit; seems too long to spin routinely... */ - retval = handshake(ehci, status_reg, + retval = ehci_handshake(ehci, status_reg, PORT_RESET, 0, 1000); if (retval != 0) { ehci_err (ehci, "port %d reset error %d\n", |