diff options
Diffstat (limited to 'drivers/usb/host/ehci-hub.c')
| -rw-r--r-- | drivers/usb/host/ehci-hub.c | 24 |
1 files changed, 12 insertions, 12 deletions
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index c7178bcde67..c44018109a1 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -659,7 +659,7 @@ static int ehci_hub_control ( * Even if OWNER is set, so the port is owned by the * companion controller, khubd needs to be able to clear * the port-change status bits (especially - * USB_PORT_FEAT_C_CONNECTION). + * USB_PORT_STAT_C_CONNECTION). */ switch (wValue) { @@ -729,12 +729,12 @@ static int ehci_hub_control ( // wPortChange bits if (temp & PORT_CSC) - status |= 1 << USB_PORT_FEAT_C_CONNECTION; + status |= USB_PORT_STAT_C_CONNECTION << 16; if (temp & PORT_PEC) - status |= 1 << USB_PORT_FEAT_C_ENABLE; + status |= USB_PORT_STAT_C_ENABLE << 16; if ((temp & PORT_OCC) && !ignore_oc){ - status |= 1 << USB_PORT_FEAT_C_OVER_CURRENT; + status |= USB_PORT_STAT_C_OVERCURRENT << 16; /* * Hubs should disable port power on over-current. @@ -791,7 +791,7 @@ static int ehci_hub_control ( if ((temp & PORT_RESET) && time_after_eq(jiffies, ehci->reset_done[wIndex])) { - status |= 1 << USB_PORT_FEAT_C_RESET; + status |= USB_PORT_STAT_C_RESET << 16; ehci->reset_done [wIndex] = 0; /* force reset to complete */ @@ -833,7 +833,7 @@ static int ehci_hub_control ( */ if (temp & PORT_CONNECT) { - status |= 1 << USB_PORT_FEAT_CONNECTION; + status |= USB_PORT_STAT_CONNECTION; // status may be from integrated TT if (ehci->has_hostpc) { temp1 = ehci_readl(ehci, hostpc_reg); @@ -842,11 +842,11 @@ static int ehci_hub_control ( status |= ehci_port_speed(ehci, temp); } if (temp & PORT_PE) - status |= 1 << USB_PORT_FEAT_ENABLE; + status |= USB_PORT_STAT_ENABLE; /* maybe the port was unsuspended without our knowledge */ if (temp & (PORT_SUSPEND|PORT_RESUME)) { - status |= 1 << USB_PORT_FEAT_SUSPEND; + status |= USB_PORT_STAT_SUSPEND; } else if (test_bit(wIndex, &ehci->suspended_ports)) { clear_bit(wIndex, &ehci->suspended_ports); ehci->reset_done[wIndex] = 0; @@ -855,13 +855,13 @@ static int ehci_hub_control ( } if (temp & PORT_OC) - status |= 1 << USB_PORT_FEAT_OVER_CURRENT; + status |= USB_PORT_STAT_OVERCURRENT; if (temp & PORT_RESET) - status |= 1 << USB_PORT_FEAT_RESET; + status |= USB_PORT_STAT_RESET; if (temp & PORT_POWER) - status |= 1 << USB_PORT_FEAT_POWER; + status |= USB_PORT_STAT_POWER; if (test_bit(wIndex, &ehci->port_c_suspend)) - status |= 1 << USB_PORT_FEAT_C_SUSPEND; + status |= USB_PORT_STAT_C_SUSPEND << 16; #ifndef VERBOSE_DEBUG if (status & ~0xffff) /* only if wPortChange is interesting */ |