diff options
Diffstat (limited to 'drivers/usb/host/ehci-omap.c')
| -rw-r--r-- | drivers/usb/host/ehci-omap.c | 23 |
1 files changed, 20 insertions, 3 deletions
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c index 40a85833503..5450e628157 100644 --- a/drivers/usb/host/ehci-omap.c +++ b/drivers/usb/host/ehci-omap.c @@ -116,6 +116,8 @@ #define OMAP_UHH_DEBUG_CSR (0x44) /* EHCI Register Set */ +#define EHCI_INSNREG04 (0xA0) +#define EHCI_INSNREG04_DISABLE_UNSUSPEND (1 << 5) #define EHCI_INSNREG05_ULPI (0xA4) #define EHCI_INSNREG05_ULPI_CONTROL_SHIFT 31 #define EHCI_INSNREG05_ULPI_PORTSEL_SHIFT 24 @@ -181,7 +183,7 @@ struct ehci_hcd_omap { void __iomem *ehci_base; /* Regulators for USB PHYs. - * Each PHY can have a seperate regulator. + * Each PHY can have a separate regulator. */ struct regulator *regulator[OMAP3_HS_USB_PORTS]; }; @@ -352,8 +354,8 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd) reg &= ~OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS; /* Bypass the TLL module for PHY mode operation */ - if (omap_rev() <= OMAP3430_REV_ES2_1) { - dev_dbg(omap->dev, "OMAP3 ES version <= ES2.1 \n"); + if (cpu_is_omap3430() && (omap_rev() <= OMAP3430_REV_ES2_1)) { + dev_dbg(omap->dev, "OMAP3 ES version <= ES2.1\n"); if ((omap->port_mode[0] == EHCI_HCD_OMAP_MODE_PHY) || (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_PHY) || (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_PHY)) @@ -382,6 +384,18 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd) dev_dbg(omap->dev, "UHH setup done, uhh_hostconfig=%x\n", reg); + /* + * An undocumented "feature" in the OMAP3 EHCI controller, + * causes suspended ports to be taken out of suspend when + * the USBCMD.Run/Stop bit is cleared (for example when + * we do ehci_bus_suspend). + * This breaks suspend-resume if the root-hub is allowed + * to suspend. Writing 1 to this undocumented register bit + * disables this feature and restores normal behavior. + */ + ehci_omap_writel(omap->ehci_base, EHCI_INSNREG04, + EHCI_INSNREG04_DISABLE_UNSUSPEND); + if ((omap->port_mode[0] == EHCI_HCD_OMAP_MODE_TLL) || (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_TLL) || (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_TLL)) { @@ -659,6 +673,9 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) goto err_add_hcd; } + /* root ports should always stay powered */ + ehci_port_power(omap->ehci, 1); + return 0; err_add_hcd: |