diff options
Diffstat (limited to 'drivers/usb/host/ehci-s5p.c')
-rw-r--r-- | drivers/usb/host/ehci-s5p.c | 61 |
1 files changed, 4 insertions, 57 deletions
diff --git a/drivers/usb/host/ehci-s5p.c b/drivers/usb/host/ehci-s5p.c index 1e483f052ff..c7e0936d4a7 100644 --- a/drivers/usb/host/ehci-s5p.c +++ b/drivers/usb/host/ehci-s5p.c @@ -200,27 +200,12 @@ static int s5p_ehci_suspend(struct device *dev) { struct s5p_ehci_hcd *s5p_ehci = dev_get_drvdata(dev); struct usb_hcd *hcd = s5p_ehci->hcd; - struct ehci_hcd *ehci = hcd_to_ehci(hcd); + bool do_wakeup = device_may_wakeup(dev); struct platform_device *pdev = to_platform_device(dev); struct s5p_ehci_platdata *pdata = pdev->dev.platform_data; - unsigned long flags; - int rc = 0; + int rc; - if (time_before(jiffies, ehci->next_statechange)) - msleep(20); - - /* - * Root hub was already suspended. Disable irq emission and - * mark HW unaccessible. The PM and USB cores make sure that - * the root hub is either suspended or stopped. - */ - ehci_prepare_ports_for_controller_suspend(ehci, device_may_wakeup(dev)); - spin_lock_irqsave(&ehci->lock, flags); - ehci_writel(ehci, 0, &ehci->regs->intr_enable); - (void)ehci_readl(ehci, &ehci->regs->intr_enable); - - clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); - spin_unlock_irqrestore(&ehci->lock, flags); + rc = ehci_suspend(hcd, do_wakeup); if (pdata && pdata->phy_exit) pdata->phy_exit(pdev, S5P_USB_PHY_HOST); @@ -234,7 +219,6 @@ static int s5p_ehci_resume(struct device *dev) { struct s5p_ehci_hcd *s5p_ehci = dev_get_drvdata(dev); struct usb_hcd *hcd = s5p_ehci->hcd; - struct ehci_hcd *ehci = hcd_to_ehci(hcd); struct platform_device *pdev = to_platform_device(dev); struct s5p_ehci_platdata *pdata = pdev->dev.platform_data; @@ -246,44 +230,7 @@ static int s5p_ehci_resume(struct device *dev) /* DMA burst Enable */ writel(EHCI_INSNREG00_ENABLE_DMA_BURST, EHCI_INSNREG00(hcd->regs)); - if (time_before(jiffies, ehci->next_statechange)) - msleep(100); - - /* Mark hardware accessible again as we are out of D3 state by now */ - set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); - - if (ehci_readl(ehci, &ehci->regs->configured_flag) == FLAG_CF) { - int mask = INTR_MASK; - - ehci_prepare_ports_for_controller_resume(ehci); - if (!hcd->self.root_hub->do_remote_wakeup) - mask &= ~STS_PCD; - ehci_writel(ehci, mask, &ehci->regs->intr_enable); - ehci_readl(ehci, &ehci->regs->intr_enable); - return 0; - } - - usb_root_hub_lost_power(hcd->self.root_hub); - - (void) ehci_halt(ehci); - (void) ehci_reset(ehci); - - /* emptying the schedule aborts any urbs */ - spin_lock_irq(&ehci->lock); - if (ehci->reclaim) - end_unlink_async(ehci); - ehci_work(ehci); - spin_unlock_irq(&ehci->lock); - - ehci_writel(ehci, ehci->command, &ehci->regs->command); - ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag); - ehci_readl(ehci, &ehci->regs->command); /* unblock posted writes */ - - /* here we "know" root ports should always stay powered */ - ehci_port_power(ehci, 1); - - ehci->rh_state = EHCI_RH_SUSPENDED; - + ehci_resume(hcd, false); return 0; } #else |