diff options
Diffstat (limited to 'drivers/usb/host/isp1760-hcd.c')
| -rw-r--r-- | drivers/usb/host/isp1760-hcd.c | 45 |
1 files changed, 27 insertions, 18 deletions
diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c index 9600a58299d..dbcafa29c77 100644 --- a/drivers/usb/host/isp1760-hcd.c +++ b/drivers/usb/host/isp1760-hcd.c @@ -14,12 +14,14 @@ #include <linux/slab.h> #include <linux/list.h> #include <linux/usb.h> +#include <linux/usb/hcd.h> #include <linux/debugfs.h> #include <linux/uaccess.h> #include <linux/io.h> +#include <linux/mm.h> #include <asm/unaligned.h> +#include <asm/cacheflush.h> -#include "../core/hcd.h" #include "isp1760-hcd.h" static struct kmem_cache *qtd_cachep; @@ -109,7 +111,7 @@ struct isp1760_qh { u32 ping; }; -#define ehci_port_speed(priv, portsc) (1 << USB_PORT_FEAT_HIGHSPEED) +#define ehci_port_speed(priv, portsc) USB_PORT_STAT_HIGH_SPEED static unsigned int isp1760_readl(__u32 __iomem *regs) { @@ -711,12 +713,11 @@ static int check_error(struct ptd *ptd) u32 dw3; dw3 = le32_to_cpu(ptd->dw3); - if (dw3 & DW3_HALT_BIT) + if (dw3 & DW3_HALT_BIT) { error = -EPIPE; - if (dw3 & DW3_ERROR_BIT) { - printk(KERN_ERR "error bit is set in DW3\n"); - error = -EPIPE; + if (dw3 & DW3_ERROR_BIT) + pr_err("error bit is set in DW3\n"); } if (dw3 & DW3_QTD_ACTIVE) { @@ -904,6 +905,14 @@ __acquires(priv->lock) status = 0; } + if (usb_pipein(urb->pipe) && usb_pipetype(urb->pipe) != PIPE_CONTROL) { + void *ptr; + for (ptr = urb->transfer_buffer; + ptr < urb->transfer_buffer + urb->transfer_buffer_length; + ptr += PAGE_SIZE) + flush_dcache_page(virt_to_page(ptr)); + } + /* complete() can reenter this HCD */ usb_hcd_unlink_urb_from_ep(priv_to_hcd(priv), urb); spin_unlock(&priv->lock); @@ -1039,12 +1048,12 @@ static void do_atl_int(struct usb_hcd *usb_hcd) if (!nakcount && (dw3 & DW3_QTD_ACTIVE)) { u32 buffstatus; - /* XXX + /* * NAKs are handled in HW by the chip. Usually if the * device is not able to send data fast enough. - * This did not trigger for a long time now. + * This happens mostly on slower hardware. */ - printk(KERN_ERR "Reloading ptd %p/%p... qh %p readed: " + printk(KERN_NOTICE "Reloading ptd %p/%p... qh %p read: " "%d of %zu done: %08x cur: %08x\n", qtd, urb, qh, PTD_XFERRED_LENGTH(dw3), qtd->length, done_map, @@ -1913,7 +1922,7 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq, * Even if OWNER is set, so the port is owned by the * companion controller, khubd needs to be able to clear * the port-change status bits (especially - * USB_PORT_FEAT_C_CONNECTION). + * USB_PORT_STAT_C_CONNECTION). */ switch (wValue) { @@ -1977,7 +1986,7 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq, /* wPortChange bits */ if (temp & PORT_CSC) - status |= 1 << USB_PORT_FEAT_C_CONNECTION; + status |= USB_PORT_STAT_C_CONNECTION << 16; /* whoever resumes must GetPortStatus to complete it!! */ @@ -1997,7 +2006,7 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq, /* resume completed? */ else if (time_after_eq(jiffies, priv->reset_done)) { - status |= 1 << USB_PORT_FEAT_C_SUSPEND; + status |= USB_PORT_STAT_C_SUSPEND << 16; priv->reset_done = 0; /* stop resume signaling */ @@ -2021,7 +2030,7 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq, if ((temp & PORT_RESET) && time_after_eq(jiffies, priv->reset_done)) { - status |= 1 << USB_PORT_FEAT_C_RESET; + status |= USB_PORT_STAT_C_RESET << 16; priv->reset_done = 0; /* force reset to complete */ @@ -2052,18 +2061,18 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq, printk(KERN_ERR "Warning: PORT_OWNER is set\n"); if (temp & PORT_CONNECT) { - status |= 1 << USB_PORT_FEAT_CONNECTION; + status |= USB_PORT_STAT_CONNECTION; /* status may be from integrated TT */ status |= ehci_port_speed(priv, temp); } if (temp & PORT_PE) - status |= 1 << USB_PORT_FEAT_ENABLE; + status |= USB_PORT_STAT_ENABLE; if (temp & (PORT_SUSPEND|PORT_RESUME)) - status |= 1 << USB_PORT_FEAT_SUSPEND; + status |= USB_PORT_STAT_SUSPEND; if (temp & PORT_RESET) - status |= 1 << USB_PORT_FEAT_RESET; + status |= USB_PORT_STAT_RESET; if (temp & PORT_POWER) - status |= 1 << USB_PORT_FEAT_POWER; + status |= USB_PORT_STAT_POWER; put_unaligned(cpu_to_le32(status), (__le32 *) buf); break; |