diff options
Diffstat (limited to 'drivers/usb/host/ohci-hcd.c')
| -rw-r--r-- | drivers/usb/host/ohci-hcd.c | 106 |
1 files changed, 25 insertions, 81 deletions
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index b28a9b60206..c31f00b7ab4 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -3,77 +3,21 @@ * * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at> * (C) Copyright 2000-2004 David Brownell <dbrownell@users.sourceforge.net> - * + * * [ Initialisation is based on Linus' ] * [ uhci code and gregs ohci fragments ] * [ (C) Copyright 1999 Linus Torvalds ] * [ (C) Copyright 1999 Gregory P. Smith] - * - * + * + * * OHCI is the main "non-Intel/VIA" standard for USB 1.1 host controller * interfaces (though some non-x86 Intel chips use it). It supports * smarter hardware than UHCI. A download link for the spec available * through the http://www.usb.org website. * - * History: - * - * 2004/03/24 LH7A404 support (Durgesh Pattamatta & Marc Singer) - * 2004/02/04 use generic dma_* functions instead of pci_* (dsaxena@plexity.net) - * 2003/02/24 show registers in sysfs (Kevin Brosius) - * - * 2002/09/03 get rid of ed hashtables, rework periodic scheduling and - * bandwidth accounting; if debugging, show schedules in driverfs - * 2002/07/19 fixes to management of ED and schedule state. - * 2002/06/09 SA-1111 support (Christopher Hoover) - * 2002/06/01 remember frame when HC won't see EDs any more; use that info - * to fix urb unlink races caused by interrupt latency assumptions; - * minor ED field and function naming updates - * 2002/01/18 package as a patch for 2.5.3; this should match the - * 2.4.17 kernel modulo some bugs being fixed. - * - * 2001/10/18 merge pmac cleanup (Benjamin Herrenschmidt) and bugfixes - * from post-2.4.5 patches. - * 2001/09/20 URB_ZERO_PACKET support; hcca_dma portability, OPTi warning - * 2001/09/07 match PCI PM changes, errnos from Linus' tree - * 2001/05/05 fork 2.4.5 version into "hcd" framework, cleanup, simplify; - * pbook pci quirks gone (please fix pbook pci sw!) (db) - * - * 2001/04/08 Identify version on module load (gb) - * 2001/03/24 td/ed hashing to remove bus_to_virt (Steve Longerbeam); - pci_map_single (db) - * 2001/03/21 td and dev/ed allocation uses new pci_pool API (db) - * 2001/03/07 hcca allocation uses pci_alloc_consistent (Steve Longerbeam) - * - * 2000/09/26 fixed races in removing the private portion of the urb - * 2000/09/07 disable bulk and control lists when unlinking the last - * endpoint descriptor in order to avoid unrecoverable errors on - * the Lucent chips. (rwc@sgi) - * 2000/08/29 use bandwidth claiming hooks (thanks Randy!), fix some - * urb unlink probs, indentation fixes - * 2000/08/11 various oops fixes mostly affecting iso and cleanup from - * device unplugs. - * 2000/06/28 use PCI hotplug framework, for better power management - * and for Cardbus support (David Brownell) - * 2000/earlier: fixes for NEC/Lucent chips; suspend/resume handling - * when the controller loses power; handle UE; cleanup; ... - * - * v5.2 1999/12/07 URB 3rd preview, - * v5.1 1999/11/30 URB 2nd preview, cpia, (usb-scsi) - * v5.0 1999/11/22 URB Technical preview, Paul Mackerras powerbook susp/resume - * i386: HUB, Keyboard, Mouse, Printer - * - * v4.3 1999/10/27 multiple HCs, bulk_request - * v4.2 1999/09/05 ISO API alpha, new dev alloc, neg Error-codes - * v4.1 1999/08/27 Randy Dunlap's - ISO API first impl. - * v4.0 1999/08/18 - * v3.0 1999/06/25 - * v2.1 1999/05/09 code clean up - * v2.0 1999/05/04 - * v1.0 1999/04/27 initial release - * * This file is licenced under the GPL. */ - + #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/pci.h> @@ -89,7 +33,7 @@ #include <linux/list.h> #include <linux/usb.h> #include <linux/usb/otg.h> -#include <linux/dma-mapping.h> +#include <linux/dma-mapping.h> #include <linux/dmapool.h> #include <linux/reboot.h> @@ -183,11 +127,11 @@ static int ohci_urb_enqueue ( int i, size = 0; unsigned long flags; int retval = 0; - + #ifdef OHCI_VERBOSE_DEBUG urb_print (urb, "SUB", usb_pipein (pipe)); #endif - + /* every endpoint has a ed, locate and maybe (re)initialize it */ if (! (ed = ed_get (ohci, ep, urb->dev, pipe, urb->interval))) return -ENOMEM; @@ -232,7 +176,7 @@ static int ohci_urb_enqueue ( memset (urb_priv, 0, sizeof (urb_priv_t) + size * sizeof (struct td *)); INIT_LIST_HEAD (&urb_priv->pending); urb_priv->length = size; - urb_priv->ed = ed; + urb_priv->ed = ed; /* allocate the TDs (deferring hash chain updates) */ for (i = 0; i < size; i++) { @@ -242,7 +186,7 @@ static int ohci_urb_enqueue ( urb_free_priv (ohci, urb_priv); return -ENOMEM; } - } + } spin_lock_irqsave (&ohci->lock, flags); @@ -313,13 +257,13 @@ static int ohci_urb_dequeue (struct usb_hcd *hcd, struct urb *urb) { struct ohci_hcd *ohci = hcd_to_ohci (hcd); unsigned long flags; - + #ifdef OHCI_VERBOSE_DEBUG urb_print (urb, "UNLINK", 1); -#endif +#endif spin_lock_irqsave (&ohci->lock, flags); - if (HC_IS_RUNNING(hcd->state)) { + if (HC_IS_RUNNING(hcd->state)) { urb_priv_t *urb_priv; /* Unless an IRQ completed the unlink while it was being @@ -512,11 +456,11 @@ static int ohci_init (struct ohci_hcd *ohci) /* Start an OHCI controller, set the BUS operational * resets USB and controller - * enable interrupts + * enable interrupts */ static int ohci_run (struct ohci_hcd *ohci) { - u32 mask, temp; + u32 mask, temp; int first = ohci->fminterval == 0; struct usb_hcd *hcd = ohci_to_hcd(ohci); @@ -534,7 +478,7 @@ static int ohci_run (struct ohci_hcd *ohci) /* also: power/overcurrent flags in roothub.a */ } - /* Reset USB nearly "by the book". RemoteWakeupConnected was + /* Reset USB nearly "by the book". RemoteWakeupConnected was * saved if boot firmware (BIOS/SMM/...) told us it's connected, * or if bus glue did the same (e.g. for PCI add-in cards with * PCI PM support). @@ -765,9 +709,9 @@ static irqreturn_t ohci_irq (struct usb_hcd *hcd) dl_done_list (ohci); spin_unlock (&ohci->lock); if (HC_IS_RUNNING(hcd->state)) - ohci_writel (ohci, OHCI_INTR_WDH, ®s->intrenable); + ohci_writel (ohci, OHCI_INTR_WDH, ®s->intrenable); } - + /* could track INTR_SO to reduce available PCI/... bandwidth */ /* handle any pending URB/ED unlinks, leaving INTR_SF enabled @@ -778,12 +722,12 @@ static irqreturn_t ohci_irq (struct usb_hcd *hcd) finish_unlinks (ohci, ohci_frame_no(ohci)); if ((ints & OHCI_INTR_SF) != 0 && !ohci->ed_rm_list && HC_IS_RUNNING(hcd->state)) - ohci_writel (ohci, OHCI_INTR_SF, ®s->intrdisable); + ohci_writel (ohci, OHCI_INTR_SF, ®s->intrdisable); spin_unlock (&ohci->lock); if (HC_IS_RUNNING(hcd->state)) { ohci_writel (ohci, ints, ®s->intrstatus); - ohci_writel (ohci, OHCI_INTR_MIE, ®s->intrenable); + ohci_writel (ohci, OHCI_INTR_MIE, ®s->intrenable); // flush those writes (void) ohci_readl (ohci, &ohci->regs->control); } @@ -794,7 +738,7 @@ static irqreturn_t ohci_irq (struct usb_hcd *hcd) /*-------------------------------------------------------------------------*/ static void ohci_stop (struct usb_hcd *hcd) -{ +{ struct ohci_hcd *ohci = hcd_to_ohci (hcd); ohci_dbg (ohci, "stop %s controller (state 0x%02x)\n", @@ -812,8 +756,8 @@ static void ohci_stop (struct usb_hcd *hcd) remove_debug_files (ohci); ohci_mem_cleanup (ohci); if (ohci->hcca) { - dma_free_coherent (hcd->self.controller, - sizeof *ohci->hcca, + dma_free_coherent (hcd->self.controller, + sizeof *ohci->hcca, ohci->hcca, ohci->hcca_dma); ohci->hcca = NULL; ohci->hcca_dma = 0; @@ -836,7 +780,7 @@ static int ohci_restart (struct ohci_hcd *ohci) * recycle any "live" eds/tds (and urbs) right away. * later, khubd disconnect processing will recycle the other state, * (either as disconnect/reconnect, or maybe someday as a reset). - */ + */ spin_lock_irq(&ohci->lock); disable (ohci); usb_root_hub_lost_power(ohci_to_hcd(ohci)->self.root_hub); @@ -875,11 +819,11 @@ static int ohci_restart (struct ohci_hcd *ohci) /* empty the interrupt branches */ for (i = 0; i < NUM_INTS; i++) ohci->load [i] = 0; for (i = 0; i < NUM_INTS; i++) ohci->hcca->int_table [i] = 0; - + /* no EDs to remove */ ohci->ed_rm_list = NULL; - /* empty control and bulk lists */ + /* empty control and bulk lists */ ohci->ed_controltail = NULL; ohci->ed_bulktail = NULL; |