diff options
Diffstat (limited to 'drivers/usb/host/ohci-nxp.c')
| -rw-r--r-- | drivers/usb/host/ohci-nxp.c | 528 |
1 files changed, 528 insertions, 0 deletions
diff --git a/drivers/usb/host/ohci-nxp.c b/drivers/usb/host/ohci-nxp.c new file mode 100644 index 00000000000..6618de1d881 --- /dev/null +++ b/drivers/usb/host/ohci-nxp.c @@ -0,0 +1,528 @@ +/* + * driver for NXP USB Host devices + * + * Currently supported OHCI host devices: + * - Philips PNX4008 + * - NXP LPC32xx + * + * Authors: Dmitry Chigirev <source@mvista.com> + * Vitaly Wool <vitalywool@gmail.com> + * + * register initialization is based on code examples provided by Philips + * Copyright (c) 2005 Koninklijke Philips Electronics N.V. + * + * NOTE: This driver does not have suspend/resume functionality + * This driver is intended for engineering development purposes only + * + * 2005-2006 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#include <linux/clk.h> +#include <linux/platform_device.h> +#include <linux/i2c.h> + +#include <mach/hardware.h> +#include <asm/mach-types.h> +#include <asm/io.h> + +#include <mach/platform.h> +#include <mach/irqs.h> +#include <asm/gpio.h> + +#define USB_CONFIG_BASE 0x31020000 +#define PWRMAN_BASE 0x40004000 + +#define USB_CTRL IO_ADDRESS(PWRMAN_BASE + 0x64) + +/* USB_CTRL bit defines */ +#define USB_SLAVE_HCLK_EN (1 << 24) +#define USB_HOST_NEED_CLK_EN (1 << 21) + +#define USB_OTG_CLK_CTRL IO_ADDRESS(USB_CONFIG_BASE + 0xFF4) +#define USB_OTG_CLK_STAT IO_ADDRESS(USB_CONFIG_BASE + 0xFF8) + +/* USB_OTG_CLK_CTRL bit defines */ +#define AHB_M_CLOCK_ON (1 << 4) +#define OTG_CLOCK_ON (1 << 3) +#define I2C_CLOCK_ON (1 << 2) +#define DEV_CLOCK_ON (1 << 1) +#define HOST_CLOCK_ON (1 << 0) + +#define USB_OTG_STAT_CONTROL IO_ADDRESS(USB_CONFIG_BASE + 0x110) + +/* USB_OTG_STAT_CONTROL bit defines */ +#define TRANSPARENT_I2C_EN (1 << 7) +#define HOST_EN (1 << 0) + +/* ISP1301 USB transceiver I2C registers */ +#define ISP1301_MODE_CONTROL_1 0x04 /* u8 read, set, +1 clear */ + +#define MC1_SPEED_REG (1 << 0) +#define MC1_SUSPEND_REG (1 << 1) +#define MC1_DAT_SE0 (1 << 2) +#define MC1_TRANSPARENT (1 << 3) +#define MC1_BDIS_ACON_EN (1 << 4) +#define MC1_OE_INT_EN (1 << 5) +#define MC1_UART_EN (1 << 6) +#define MC1_MASK 0x7f + +#define ISP1301_MODE_CONTROL_2 0x12 /* u8 read, set, +1 clear */ + +#define MC2_GLOBAL_PWR_DN (1 << 0) +#define MC2_SPD_SUSP_CTRL (1 << 1) +#define MC2_BI_DI (1 << 2) +#define MC2_TRANSP_BDIR0 (1 << 3) +#define MC2_TRANSP_BDIR1 (1 << 4) +#define MC2_AUDIO_EN (1 << 5) +#define MC2_PSW_EN (1 << 6) +#define MC2_EN2V7 (1 << 7) + +#define ISP1301_OTG_CONTROL_1 0x06 /* u8 read, set, +1 clear */ +# define OTG1_DP_PULLUP (1 << 0) +# define OTG1_DM_PULLUP (1 << 1) +# define OTG1_DP_PULLDOWN (1 << 2) +# define OTG1_DM_PULLDOWN (1 << 3) +# define OTG1_ID_PULLDOWN (1 << 4) +# define OTG1_VBUS_DRV (1 << 5) +# define OTG1_VBUS_DISCHRG (1 << 6) +# define OTG1_VBUS_CHRG (1 << 7) +#define ISP1301_OTG_STATUS 0x10 /* u8 readonly */ +# define OTG_B_SESS_END (1 << 6) +# define OTG_B_SESS_VLD (1 << 7) + +#define ISP1301_I2C_ADDR 0x2C + +#define ISP1301_I2C_MODE_CONTROL_1 0x4 +#define ISP1301_I2C_MODE_CONTROL_2 0x12 +#define ISP1301_I2C_OTG_CONTROL_1 0x6 +#define ISP1301_I2C_OTG_CONTROL_2 0x10 +#define ISP1301_I2C_INTERRUPT_SOURCE 0x8 +#define ISP1301_I2C_INTERRUPT_LATCH 0xA +#define ISP1301_I2C_INTERRUPT_FALLING 0xC +#define ISP1301_I2C_INTERRUPT_RISING 0xE +#define ISP1301_I2C_REG_CLEAR_ADDR 1 + +/* On LPC32xx, those are undefined */ +#ifndef start_int_set_falling_edge +#define start_int_set_falling_edge(irq) +#define start_int_set_rising_edge(irq) +#define start_int_ack(irq) +#define start_int_mask(irq) +#define start_int_umask(irq) +#endif + +static struct i2c_driver isp1301_driver; +static struct i2c_client *isp1301_i2c_client; + +extern int usb_disabled(void); +extern int ocpi_enable(void); + +static struct clk *usb_clk; + +static const unsigned short normal_i2c[] = + { ISP1301_I2C_ADDR, ISP1301_I2C_ADDR + 1, I2C_CLIENT_END }; + +static int isp1301_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + return 0; +} + +static int isp1301_remove(struct i2c_client *client) +{ + return 0; +} + +static const struct i2c_device_id isp1301_id[] = { + { "isp1301_nxp", 0 }, + { } +}; + +static struct i2c_driver isp1301_driver = { + .driver = { + .name = "isp1301_nxp", + }, + .probe = isp1301_probe, + .remove = isp1301_remove, + .id_table = isp1301_id, +}; + +static void isp1301_configure_pnx4008(void) +{ + /* PNX4008 only supports DAT_SE0 USB mode */ + /* PNX4008 R2A requires setting the MAX603 to output 3.6V */ + /* Power up externel charge-pump */ + + i2c_smbus_write_byte_data(isp1301_i2c_client, + ISP1301_I2C_MODE_CONTROL_1, MC1_DAT_SE0 | MC1_SPEED_REG); + i2c_smbus_write_byte_data(isp1301_i2c_client, + ISP1301_I2C_MODE_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR, + ~(MC1_DAT_SE0 | MC1_SPEED_REG)); + i2c_smbus_write_byte_data(isp1301_i2c_client, + ISP1301_I2C_MODE_CONTROL_2, + MC2_BI_DI | MC2_PSW_EN | MC2_SPD_SUSP_CTRL); + i2c_smbus_write_byte_data(isp1301_i2c_client, + ISP1301_I2C_MODE_CONTROL_2 | ISP1301_I2C_REG_CLEAR_ADDR, + ~(MC2_BI_DI | MC2_PSW_EN | MC2_SPD_SUSP_CTRL)); + i2c_smbus_write_byte_data(isp1301_i2c_client, + ISP1301_I2C_OTG_CONTROL_1, OTG1_DM_PULLDOWN | OTG1_DP_PULLDOWN); + i2c_smbus_write_byte_data(isp1301_i2c_client, + ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR, + ~(OTG1_DM_PULLDOWN | OTG1_DP_PULLDOWN)); + i2c_smbus_write_byte_data(isp1301_i2c_client, + ISP1301_I2C_INTERRUPT_LATCH | ISP1301_I2C_REG_CLEAR_ADDR, 0xFF); + i2c_smbus_write_byte_data(isp1301_i2c_client, + ISP1301_I2C_INTERRUPT_FALLING | ISP1301_I2C_REG_CLEAR_ADDR, + 0xFF); + i2c_smbus_write_byte_data(isp1301_i2c_client, + ISP1301_I2C_INTERRUPT_RISING | ISP1301_I2C_REG_CLEAR_ADDR, + 0xFF); +} + +static void isp1301_configure_lpc32xx(void) +{ + /* LPC32XX only supports DAT_SE0 USB mode */ + /* This sequence is important */ + + /* Disable transparent UART mode first */ + i2c_smbus_write_byte_data(isp1301_i2c_client, + (ISP1301_I2C_MODE_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR), + MC1_UART_EN); + i2c_smbus_write_byte_data(isp1301_i2c_client, + (ISP1301_I2C_MODE_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR), + ~MC1_SPEED_REG); + i2c_smbus_write_byte_data(isp1301_i2c_client, + ISP1301_I2C_MODE_CONTROL_1, MC1_SPEED_REG); + i2c_smbus_write_byte_data(isp1301_i2c_client, + (ISP1301_I2C_MODE_CONTROL_2 | ISP1301_I2C_REG_CLEAR_ADDR), + ~0); + i2c_smbus_write_byte_data(isp1301_i2c_client, + ISP1301_I2C_MODE_CONTROL_2, + (MC2_BI_DI | MC2_PSW_EN | MC2_SPD_SUSP_CTRL)); + i2c_smbus_write_byte_data(isp1301_i2c_client, + (ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR), ~0); + i2c_smbus_write_byte_data(isp1301_i2c_client, + ISP1301_I2C_MODE_CONTROL_1, MC1_DAT_SE0); + i2c_smbus_write_byte_data(isp1301_i2c_client, + ISP1301_I2C_OTG_CONTROL_1, + (OTG1_DM_PULLDOWN | OTG1_DP_PULLDOWN)); + i2c_smbus_write_byte_data(isp1301_i2c_client, + (ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR), + (OTG1_DM_PULLUP | OTG1_DP_PULLUP)); + i2c_smbus_write_byte_data(isp1301_i2c_client, + ISP1301_I2C_INTERRUPT_LATCH | ISP1301_I2C_REG_CLEAR_ADDR, ~0); + i2c_smbus_write_byte_data(isp1301_i2c_client, + ISP1301_I2C_INTERRUPT_FALLING | ISP1301_I2C_REG_CLEAR_ADDR, + ~0); + i2c_smbus_write_byte_data(isp1301_i2c_client, + ISP1301_I2C_INTERRUPT_RISING | ISP1301_I2C_REG_CLEAR_ADDR, ~0); + + /* Enable usb_need_clk clock after transceiver is initialized */ + __raw_writel((__raw_readl(USB_CTRL) | (1 << 22)), USB_CTRL); + + printk(KERN_INFO "ISP1301 Vendor ID : 0x%04x\n", + i2c_smbus_read_word_data(isp1301_i2c_client, 0x00)); + printk(KERN_INFO "ISP1301 Product ID : 0x%04x\n", + i2c_smbus_read_word_data(isp1301_i2c_client, 0x02)); + printk(KERN_INFO "ISP1301 Version ID : 0x%04x\n", + i2c_smbus_read_word_data(isp1301_i2c_client, 0x14)); +} + +static void isp1301_configure(void) +{ + if (machine_is_pnx4008()) + isp1301_configure_pnx4008(); + else + isp1301_configure_lpc32xx(); +} + +static inline void isp1301_vbus_on(void) +{ + i2c_smbus_write_byte_data(isp1301_i2c_client, ISP1301_I2C_OTG_CONTROL_1, + OTG1_VBUS_DRV); +} + +static inline void isp1301_vbus_off(void) +{ + i2c_smbus_write_byte_data(isp1301_i2c_client, + ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR, + OTG1_VBUS_DRV); +} + +static void nxp_start_hc(void) +{ + unsigned long tmp = __raw_readl(USB_OTG_STAT_CONTROL) | HOST_EN; + __raw_writel(tmp, USB_OTG_STAT_CONTROL); + isp1301_vbus_on(); +} + +static void nxp_stop_hc(void) +{ + unsigned long tmp; + isp1301_vbus_off(); + tmp = __raw_readl(USB_OTG_STAT_CONTROL) & ~HOST_EN; + __raw_writel(tmp, USB_OTG_STAT_CONTROL); +} + +static int __devinit ohci_nxp_start(struct usb_hcd *hcd) +{ + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + int ret; + + if ((ret = ohci_init(ohci)) < 0) + return ret; + + if ((ret = ohci_run(ohci)) < 0) { + dev_err(hcd->self.controller, "can't start\n"); + ohci_stop(hcd); + return ret; + } + return 0; +} + +static const struct hc_driver ohci_nxp_hc_driver = { + .description = hcd_name, + .product_desc = "nxp OHCI", + + /* + * generic hardware linkage + */ + .irq = ohci_irq, + .flags = HCD_USB11 | HCD_MEMORY, + + .hcd_priv_size = sizeof(struct ohci_hcd), + /* + * basic lifecycle operations + */ + .start = ohci_nxp_start, + .stop = ohci_stop, + .shutdown = ohci_shutdown, + + /* + * managing i/o requests and associated device resources + */ + .urb_enqueue = ohci_urb_enqueue, + .urb_dequeue = ohci_urb_dequeue, + .endpoint_disable = ohci_endpoint_disable, + + /* + * scheduling support + */ + .get_frame_number = ohci_get_frame, + + /* + * root hub support + */ + .hub_status_data = ohci_hub_status_data, + .hub_control = ohci_hub_control, +#ifdef CONFIG_PM + .bus_suspend = ohci_bus_suspend, + .bus_resume = ohci_bus_resume, +#endif + .start_port_reset = ohci_start_port_reset, +}; + +#define USB_CLOCK_MASK (AHB_M_CLOCK_ON| OTG_CLOCK_ON | HOST_CLOCK_ON | I2C_CLOCK_ON) + +static void nxp_set_usb_bits(void) +{ + if (machine_is_pnx4008()) { + start_int_set_falling_edge(SE_USB_OTG_ATX_INT_N); + start_int_ack(SE_USB_OTG_ATX_INT_N); + start_int_umask(SE_USB_OTG_ATX_INT_N); + + start_int_set_rising_edge(SE_USB_OTG_TIMER_INT); + start_int_ack(SE_USB_OTG_TIMER_INT); + start_int_umask(SE_USB_OTG_TIMER_INT); + + start_int_set_rising_edge(SE_USB_I2C_INT); + start_int_ack(SE_USB_I2C_INT); + start_int_umask(SE_USB_I2C_INT); + + start_int_set_rising_edge(SE_USB_INT); + start_int_ack(SE_USB_INT); + start_int_umask(SE_USB_INT); + + start_int_set_rising_edge(SE_USB_NEED_CLK_INT); + start_int_ack(SE_USB_NEED_CLK_INT); + start_int_umask(SE_USB_NEED_CLK_INT); + + start_int_set_rising_edge(SE_USB_AHB_NEED_CLK_INT); + start_int_ack(SE_USB_AHB_NEED_CLK_INT); + start_int_umask(SE_USB_AHB_NEED_CLK_INT); + } +} + +static void nxp_unset_usb_bits(void) +{ + if (machine_is_pnx4008()) { + start_int_mask(SE_USB_OTG_ATX_INT_N); + start_int_mask(SE_USB_OTG_TIMER_INT); + start_int_mask(SE_USB_I2C_INT); + start_int_mask(SE_USB_INT); + start_int_mask(SE_USB_NEED_CLK_INT); + start_int_mask(SE_USB_AHB_NEED_CLK_INT); + } +} + +static int __devinit usb_hcd_nxp_probe(struct platform_device *pdev) +{ + struct usb_hcd *hcd = 0; + struct ohci_hcd *ohci; + const struct hc_driver *driver = &ohci_nxp_hc_driver; + struct i2c_adapter *i2c_adap; + struct i2c_board_info i2c_info; + + int ret = 0, irq; + + dev_dbg(&pdev->dev, "%s: " DRIVER_DESC " (nxp)\n", hcd_name); + if (usb_disabled()) { + err("USB is disabled"); + ret = -ENODEV; + goto out; + } + + if (pdev->num_resources != 2 + || pdev->resource[0].flags != IORESOURCE_MEM + || pdev->resource[1].flags != IORESOURCE_IRQ) { + err("Invalid resource configuration"); + ret = -ENODEV; + goto out; + } + + /* Enable AHB slave USB clock, needed for further USB clock control */ + __raw_writel(USB_SLAVE_HCLK_EN | (1 << 19), USB_CTRL); + + ret = i2c_add_driver(&isp1301_driver); + if (ret < 0) { + err("failed to add ISP1301 driver"); + goto out; + } + i2c_adap = i2c_get_adapter(2); + memset(&i2c_info, 0, sizeof(struct i2c_board_info)); + strlcpy(i2c_info.type, "isp1301_nxp", I2C_NAME_SIZE); + isp1301_i2c_client = i2c_new_probed_device(i2c_adap, &i2c_info, + normal_i2c, NULL); + i2c_put_adapter(i2c_adap); + if (!isp1301_i2c_client) { + err("failed to connect I2C to ISP1301 USB Transceiver"); + ret = -ENODEV; + goto out_i2c_driver; + } + + isp1301_configure(); + + /* Enable USB PLL */ + usb_clk = clk_get(&pdev->dev, "ck_pll5"); + if (IS_ERR(usb_clk)) { + err("failed to acquire USB PLL"); + ret = PTR_ERR(usb_clk); + goto out1; + } + + ret = clk_enable(usb_clk); + if (ret < 0) { + err("failed to start USB PLL"); + goto out2; + } + + ret = clk_set_rate(usb_clk, 48000); + if (ret < 0) { + err("failed to set USB clock rate"); + goto out3; + } + + __raw_writel(__raw_readl(USB_CTRL) | USB_HOST_NEED_CLK_EN, USB_CTRL); + + /* Set to enable all needed USB clocks */ + __raw_writel(USB_CLOCK_MASK, USB_OTG_CLK_CTRL); + + while ((__raw_readl(USB_OTG_CLK_STAT) & USB_CLOCK_MASK) != + USB_CLOCK_MASK) ; + + hcd = usb_create_hcd (driver, &pdev->dev, dev_name(&pdev->dev)); + if (!hcd) { + err("Failed to allocate HC buffer"); + ret = -ENOMEM; + goto out3; + } + + /* Set all USB bits in the Start Enable register */ + nxp_set_usb_bits(); + + hcd->rsrc_start = pdev->resource[0].start; + hcd->rsrc_len = pdev->resource[0].end - pdev->resource[0].start + 1; + if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { + dev_dbg(&pdev->dev, "request_mem_region failed\n"); + ret = -ENOMEM; + goto out4; + } + hcd->regs = (void __iomem *)pdev->resource[0].start; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + ret = -ENXIO; + goto out4; + } + + nxp_start_hc(); + platform_set_drvdata(pdev, hcd); + ohci = hcd_to_ohci(hcd); + ohci_hcd_init(ohci); + + dev_info(&pdev->dev, "at 0x%p, irq %d\n", hcd->regs, hcd->irq); + ret = usb_add_hcd(hcd, irq, 0); + if (ret == 0) + return ret; + + nxp_stop_hc(); +out4: + nxp_unset_usb_bits(); + usb_put_hcd(hcd); +out3: + clk_disable(usb_clk); +out2: + clk_put(usb_clk); +out1: + i2c_unregister_device(isp1301_i2c_client); + isp1301_i2c_client = NULL; +out_i2c_driver: + i2c_del_driver(&isp1301_driver); +out: + return ret; +} + +static int usb_hcd_nxp_remove(struct platform_device *pdev) +{ + struct usb_hcd *hcd = platform_get_drvdata(pdev); + + usb_remove_hcd(hcd); + nxp_stop_hc(); + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); + usb_put_hcd(hcd); + nxp_unset_usb_bits(); + clk_disable(usb_clk); + clk_put(usb_clk); + i2c_unregister_device(isp1301_i2c_client); + isp1301_i2c_client = NULL; + i2c_del_driver(&isp1301_driver); + + platform_set_drvdata(pdev, NULL); + + return 0; +} + +/* work with hotplug and coldplug */ +MODULE_ALIAS("platform:usb-ohci"); + +static struct platform_driver usb_hcd_nxp_driver = { + .driver = { + .name = "usb-ohci", + .owner = THIS_MODULE, + }, + .probe = usb_hcd_nxp_probe, + .remove = usb_hcd_nxp_remove, +}; + |