diff options
Diffstat (limited to 'drivers/usb/host/ohci-omap3.c')
| -rw-r--r-- | drivers/usb/host/ohci-omap3.c | 735 |
1 files changed, 735 insertions, 0 deletions
diff --git a/drivers/usb/host/ohci-omap3.c b/drivers/usb/host/ohci-omap3.c new file mode 100644 index 00000000000..2cc8a504b18 --- /dev/null +++ b/drivers/usb/host/ohci-omap3.c @@ -0,0 +1,735 @@ +/* + * ohci-omap3.c - driver for OHCI on OMAP3 and later processors + * + * Bus Glue for OMAP3 USBHOST 3 port OHCI controller + * This controller is also used in later OMAPs and AM35x chips + * + * Copyright (C) 2007-2010 Texas Instruments, Inc. + * Author: Vikram Pandita <vikram.pandita@ti.com> + * Author: Anand Gadiyar <gadiyar@ti.com> + * + * Based on ehci-omap.c and some other ohci glue layers + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * TODO (last updated Mar 10th, 2010): + * - add kernel-doc + * - Factor out code common to EHCI to a separate file + * - Make EHCI and OHCI coexist together + * - needs newer silicon versions to actually work + * - the last one to be loaded currently steps on the other's toes + * - Add hooks for configuring transceivers, etc. at init/exit + * - Add aggressive clock-management code + */ + +#include <linux/platform_device.h> +#include <linux/clk.h> + +#include <plat/usb.h> + +/* + * OMAP USBHOST Register addresses: VIRTUAL ADDRESSES + * Use ohci_omap_readl()/ohci_omap_writel() functions + */ + +/* TLL Register Set */ +#define OMAP_USBTLL_REVISION (0x00) +#define OMAP_USBTLL_SYSCONFIG (0x10) +#define OMAP_USBTLL_SYSCONFIG_CACTIVITY (1 << 8) +#define OMAP_USBTLL_SYSCONFIG_SIDLEMODE (1 << 3) +#define OMAP_USBTLL_SYSCONFIG_ENAWAKEUP (1 << 2) +#define OMAP_USBTLL_SYSCONFIG_SOFTRESET (1 << 1) +#define OMAP_USBTLL_SYSCONFIG_AUTOIDLE (1 << 0) + +#define OMAP_USBTLL_SYSSTATUS (0x14) +#define OMAP_USBTLL_SYSSTATUS_RESETDONE (1 << 0) + +#define OMAP_USBTLL_IRQSTATUS (0x18) +#define OMAP_USBTLL_IRQENABLE (0x1C) + +#define OMAP_TLL_SHARED_CONF (0x30) +#define OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN (1 << 6) +#define OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN (1 << 5) +#define OMAP_TLL_SHARED_CONF_USB_DIVRATION (1 << 2) +#define OMAP_TLL_SHARED_CONF_FCLK_REQ (1 << 1) +#define OMAP_TLL_SHARED_CONF_FCLK_IS_ON (1 << 0) + +#define OMAP_TLL_CHANNEL_CONF(num) (0x040 + 0x004 * num) +#define OMAP_TLL_CHANNEL_CONF_FSLSMODE_SHIFT 24 +#define OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF (1 << 11) +#define OMAP_TLL_CHANNEL_CONF_ULPI_ULPIAUTOIDLE (1 << 10) +#define OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE (1 << 9) +#define OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE (1 << 8) +#define OMAP_TLL_CHANNEL_CONF_CHANMODE_FSLS (1 << 1) +#define OMAP_TLL_CHANNEL_CONF_CHANEN (1 << 0) + +#define OMAP_TLL_CHANNEL_COUNT 3 + +/* UHH Register Set */ +#define OMAP_UHH_REVISION (0x00) +#define OMAP_UHH_SYSCONFIG (0x10) +#define OMAP_UHH_SYSCONFIG_MIDLEMODE (1 << 12) +#define OMAP_UHH_SYSCONFIG_CACTIVITY (1 << 8) +#define OMAP_UHH_SYSCONFIG_SIDLEMODE (1 << 3) +#define OMAP_UHH_SYSCONFIG_ENAWAKEUP (1 << 2) +#define OMAP_UHH_SYSCONFIG_SOFTRESET (1 << 1) +#define OMAP_UHH_SYSCONFIG_AUTOIDLE (1 << 0) + +#define OMAP_UHH_SYSSTATUS (0x14) +#define OMAP_UHH_SYSSTATUS_UHHRESETDONE (1 << 0) +#define OMAP_UHH_SYSSTATUS_OHCIRESETDONE (1 << 1) +#define OMAP_UHH_SYSSTATUS_EHCIRESETDONE (1 << 2) +#define OMAP_UHH_HOSTCONFIG (0x40) +#define OMAP_UHH_HOSTCONFIG_ULPI_BYPASS (1 << 0) +#define OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS (1 << 0) +#define OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS (1 << 11) +#define OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS (1 << 12) +#define OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN (1 << 2) +#define OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN (1 << 3) +#define OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN (1 << 4) +#define OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN (1 << 5) +#define OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS (1 << 8) +#define OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS (1 << 9) +#define OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS (1 << 10) + +#define OMAP_UHH_DEBUG_CSR (0x44) + +/*-------------------------------------------------------------------------*/ + +static inline void ohci_omap_writel(void __iomem *base, u32 reg, u32 val) +{ + __raw_writel(val, base + reg); +} + +static inline u32 ohci_omap_readl(void __iomem *base, u32 reg) +{ + return __raw_readl(base + reg); +} + +static inline void ohci_omap_writeb(void __iomem *base, u8 reg, u8 val) +{ + __raw_writeb(val, base + reg); +} + +static inline u8 ohci_omap_readb(void __iomem *base, u8 reg) +{ + return __raw_readb(base + reg); +} + +/*-------------------------------------------------------------------------*/ + +struct ohci_hcd_omap3 { + struct ohci_hcd *ohci; + struct device *dev; + + struct clk *usbhost_ick; + struct clk *usbhost2_120m_fck; + struct clk *usbhost1_48m_fck; + struct clk *usbtll_fck; + struct clk *usbtll_ick; + + /* port_mode: TLL/PHY, 2/3/4/6-PIN, DP-DM/DAT-SE0 */ + enum ohci_omap3_port_mode port_mode[OMAP3_HS_USB_PORTS]; + void __iomem *uhh_base; + void __iomem *tll_base; + void __iomem *ohci_base; + + unsigned es2_compatibility:1; +}; + +/*-------------------------------------------------------------------------*/ + +static void ohci_omap3_clock_power(struct ohci_hcd_omap3 *omap, int on) +{ + if (on) { + clk_enable(omap->usbtll_ick); + clk_enable(omap->usbtll_fck); + clk_enable(omap->usbhost_ick); + clk_enable(omap->usbhost1_48m_fck); + clk_enable(omap->usbhost2_120m_fck); + } else { + clk_disable(omap->usbhost2_120m_fck); + clk_disable(omap->usbhost1_48m_fck); + clk_disable(omap->usbhost_ick); + clk_disable(omap->usbtll_fck); + clk_disable(omap->usbtll_ick); + } +} + +static int ohci_omap3_init(struct usb_hcd *hcd) +{ + dev_dbg(hcd->self.controller, "starting OHCI controller\n"); + + return ohci_init(hcd_to_ohci(hcd)); +} + + +/*-------------------------------------------------------------------------*/ + +static int ohci_omap3_start(struct usb_hcd *hcd) +{ + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + int ret; + + /* + * RemoteWakeupConnected has to be set explicitly before + * calling ohci_run. The reset value of RWC is 0. + */ + ohci->hc_control = OHCI_CTRL_RWC; + writel(OHCI_CTRL_RWC, &ohci->regs->control); + + ret = ohci_run(ohci); + + if (ret < 0) { + dev_err(hcd->self.controller, "can't start\n"); + ohci_stop(hcd); + } + + return ret; +} + +/*-------------------------------------------------------------------------*/ + +/* + * convert the port-mode enum to a value we can use in the FSLSMODE + * field of USBTLL_CHANNEL_CONF + */ +static unsigned ohci_omap3_fslsmode(enum ohci_omap3_port_mode mode) +{ + switch (mode) { + case OMAP_OHCI_PORT_MODE_UNUSED: + case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: + return 0x0; + + case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM: + return 0x1; + + case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0: + return 0x2; + + case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM: + return 0x3; + + case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0: + return 0x4; + + case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM: + return 0x5; + + case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0: + return 0x6; + + case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM: + return 0x7; + + case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0: + return 0xA; + + case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM: + return 0xB; + default: + pr_warning("Invalid port mode, using default\n"); + return 0x0; + } +} + +static void ohci_omap3_tll_config(struct ohci_hcd_omap3 *omap) +{ + u32 reg; + int i; + + /* Program TLL SHARED CONF */ + reg = ohci_omap_readl(omap->tll_base, OMAP_TLL_SHARED_CONF); + reg &= ~OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN; + reg &= ~OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN; + reg |= OMAP_TLL_SHARED_CONF_USB_DIVRATION; + reg |= OMAP_TLL_SHARED_CONF_FCLK_IS_ON; + ohci_omap_writel(omap->tll_base, OMAP_TLL_SHARED_CONF, reg); + + /* Program each TLL channel */ + /* + * REVISIT: Only the 3-pin and 4-pin PHY modes have + * actually been tested. + */ + for (i = 0; i < OMAP_TLL_CHANNEL_COUNT; i++) { + + /* Enable only those channels that are actually used */ + if (omap->port_mode[i] == OMAP_OHCI_PORT_MODE_UNUSED) + continue; + + reg = ohci_omap_readl(omap->tll_base, OMAP_TLL_CHANNEL_CONF(i)); + reg |= ohci_omap3_fslsmode(omap->port_mode[i]) + << OMAP_TLL_CHANNEL_CONF_FSLSMODE_SHIFT; + reg |= OMAP_TLL_CHANNEL_CONF_CHANMODE_FSLS; + reg |= OMAP_TLL_CHANNEL_CONF_CHANEN; + ohci_omap_writel(omap->tll_base, OMAP_TLL_CHANNEL_CONF(i), reg); + } +} + +/* omap3_start_ohci + * - Start the TI USBHOST controller + */ +static int omap3_start_ohci(struct ohci_hcd_omap3 *omap, struct usb_hcd *hcd) +{ + unsigned long timeout = jiffies + msecs_to_jiffies(1000); + u32 reg = 0; + int ret = 0; + + dev_dbg(omap->dev, "starting TI OHCI USB Controller\n"); + + /* Get all the clock handles we need */ + omap->usbhost_ick = clk_get(omap->dev, "usbhost_ick"); + if (IS_ERR(omap->usbhost_ick)) { + dev_err(omap->dev, "could not get usbhost_ick\n"); + ret = PTR_ERR(omap->usbhost_ick); + goto err_host_ick; + } + + omap->usbhost2_120m_fck = clk_get(omap->dev, "usbhost_120m_fck"); + if (IS_ERR(omap->usbhost2_120m_fck)) { + dev_err(omap->dev, "could not get usbhost_120m_fck\n"); + ret = PTR_ERR(omap->usbhost2_120m_fck); + goto err_host_120m_fck; + } + + omap->usbhost1_48m_fck = clk_get(omap->dev, "usbhost_48m_fck"); + if (IS_ERR(omap->usbhost1_48m_fck)) { + dev_err(omap->dev, "could not get usbhost_48m_fck\n"); + ret = PTR_ERR(omap->usbhost1_48m_fck); + goto err_host_48m_fck; + } + + omap->usbtll_fck = clk_get(omap->dev, "usbtll_fck"); + if (IS_ERR(omap->usbtll_fck)) { + dev_err(omap->dev, "could not get usbtll_fck\n"); + ret = PTR_ERR(omap->usbtll_fck); + goto err_tll_fck; + } + + omap->usbtll_ick = clk_get(omap->dev, "usbtll_ick"); + if (IS_ERR(omap->usbtll_ick)) { + dev_err(omap->dev, "could not get usbtll_ick\n"); + ret = PTR_ERR(omap->usbtll_ick); + goto err_tll_ick; + } + + /* Now enable all the clocks in the correct order */ + ohci_omap3_clock_power(omap, 1); + + /* perform TLL soft reset, and wait until reset is complete */ + ohci_omap_writel(omap->tll_base, OMAP_USBTLL_SYSCONFIG, + OMAP_USBTLL_SYSCONFIG_SOFTRESET); + + /* Wait for TLL reset to complete */ + while (!(ohci_omap_readl(omap->tll_base, OMAP_USBTLL_SYSSTATUS) + & OMAP_USBTLL_SYSSTATUS_RESETDONE)) { + cpu_relax(); + + if (time_after(jiffies, timeout)) { + dev_dbg(omap->dev, "operation timed out\n"); + ret = -EINVAL; + goto err_sys_status; + } + } + + dev_dbg(omap->dev, "TLL reset done\n"); + + /* (1<<3) = no idle mode only for initial debugging */ + ohci_omap_writel(omap->tll_base, OMAP_USBTLL_SYSCONFIG, + OMAP_USBTLL_SYSCONFIG_ENAWAKEUP | + OMAP_USBTLL_SYSCONFIG_SIDLEMODE | + OMAP_USBTLL_SYSCONFIG_CACTIVITY); + + + /* Put UHH in NoIdle/NoStandby mode */ + reg = ohci_omap_readl(omap->uhh_base, OMAP_UHH_SYSCONFIG); + reg |= (OMAP_UHH_SYSCONFIG_ENAWAKEUP + | OMAP_UHH_SYSCONFIG_SIDLEMODE + | OMAP_UHH_SYSCONFIG_CACTIVITY + | OMAP_UHH_SYSCONFIG_MIDLEMODE); + reg &= ~OMAP_UHH_SYSCONFIG_AUTOIDLE; + reg &= ~OMAP_UHH_SYSCONFIG_SOFTRESET; + + ohci_omap_writel(omap->uhh_base, OMAP_UHH_SYSCONFIG, reg); + + reg = ohci_omap_readl(omap->uhh_base, OMAP_UHH_HOSTCONFIG); + + /* setup ULPI bypass and burst configurations */ + reg |= (OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN + | OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN + | OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN); + reg &= ~OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN; + + /* + * REVISIT: Pi_CONNECT_STATUS controls MStandby + * assertion and Swakeup generation - let us not + * worry about this for now. OMAP HWMOD framework + * might take care of this later. If not, we can + * update these registers when adding aggressive + * clock management code. + * + * For now, turn off all the Pi_CONNECT_STATUS bits + * + if (omap->port_mode[0] == OMAP_OHCI_PORT_MODE_UNUSED) + reg &= ~OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS; + if (omap->port_mode[1] == OMAP_OHCI_PORT_MODE_UNUSED) + reg &= ~OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS; + if (omap->port_mode[2] == OMAP_OHCI_PORT_MODE_UNUSED) + reg &= ~OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS; + */ + reg &= ~OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS; + reg &= ~OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS; + reg &= ~OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS; + + if (omap->es2_compatibility) { + /* + * All OHCI modes need to go through the TLL, + * unlike in the EHCI case. So use UTMI mode + * for all ports for OHCI, on ES2.x silicon + */ + dev_dbg(omap->dev, "OMAP3 ES version <= ES2.1\n"); + reg |= OMAP_UHH_HOSTCONFIG_ULPI_BYPASS; + } else { + dev_dbg(omap->dev, "OMAP3 ES version > ES2.1\n"); + if (omap->port_mode[0] == OMAP_OHCI_PORT_MODE_UNUSED) + reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS; + else + reg |= OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS; + + if (omap->port_mode[1] == OMAP_OHCI_PORT_MODE_UNUSED) + reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS; + else + reg |= OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS; + + if (omap->port_mode[2] == OMAP_OHCI_PORT_MODE_UNUSED) + reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS; + else + reg |= OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS; + + } + ohci_omap_writel(omap->uhh_base, OMAP_UHH_HOSTCONFIG, reg); + dev_dbg(omap->dev, "UHH setup done, uhh_hostconfig=%x\n", reg); + + ohci_omap3_tll_config(omap); + + return 0; + +err_sys_status: + ohci_omap3_clock_power(omap, 0); + clk_put(omap->usbtll_ick); + +err_tll_ick: + clk_put(omap->usbtll_fck); + +err_tll_fck: + clk_put(omap->usbhost1_48m_fck); + +err_host_48m_fck: + clk_put(omap->usbhost2_120m_fck); + +err_host_120m_fck: + clk_put(omap->usbhost_ick); + +err_host_ick: + return ret; +} + +static void omap3_stop_ohci(struct ohci_hcd_omap3 *omap, struct usb_hcd *hcd) +{ + unsigned long timeout = jiffies + msecs_to_jiffies(100); + + dev_dbg(omap->dev, "stopping TI EHCI USB Controller\n"); + + /* Reset USBHOST for insmod/rmmod to work */ + ohci_omap_writel(omap->uhh_base, OMAP_UHH_SYSCONFIG, + OMAP_UHH_SYSCONFIG_SOFTRESET); + while (!(ohci_omap_readl(omap->uhh_base, OMAP_UHH_SYSSTATUS) + & OMAP_UHH_SYSSTATUS_UHHRESETDONE)) { + cpu_relax(); + + if (time_after(jiffies, timeout)) + dev_dbg(omap->dev, "operation timed out\n"); + } + + while (!(ohci_omap_readl(omap->uhh_base, OMAP_UHH_SYSSTATUS) + & OMAP_UHH_SYSSTATUS_OHCIRESETDONE)) { + cpu_relax(); + + if (time_after(jiffies, timeout)) + dev_dbg(omap->dev, "operation timed out\n"); + } + + while (!(ohci_omap_readl(omap->uhh_base, OMAP_UHH_SYSSTATUS) + & OMAP_UHH_SYSSTATUS_EHCIRESETDONE)) { + cpu_relax(); + + if (time_after(jiffies, timeout)) + dev_dbg(omap->dev, "operation timed out\n"); + } + + ohci_omap_writel(omap->tll_base, OMAP_USBTLL_SYSCONFIG, (1 << 1)); + + while (!(ohci_omap_readl(omap->tll_base, OMAP_USBTLL_SYSSTATUS) + & (1 << 0))) { + cpu_relax(); + + if (time_after(jiffies, timeout)) + dev_dbg(omap->dev, "operation timed out\n"); + } + + ohci_omap3_clock_power(omap, 0); + + if (omap->usbtll_fck != NULL) { + clk_put(omap->usbtll_fck); + omap->usbtll_fck = NULL; + } + + if (omap->usbhost_ick != NULL) { + clk_put(omap->usbhost_ick); + omap->usbhost_ick = NULL; + } + + if (omap->usbhost1_48m_fck != NULL) { + clk_put(omap->usbhost1_48m_fck); + omap->usbhost1_48m_fck = NULL; + } + + if (omap->usbhost2_120m_fck != NULL) { + clk_put(omap->usbhost2_120m_fck); + omap->usbhost2_120m_fck = NULL; + } + + if (omap->usbtll_ick != NULL) { + clk_put(omap->usbtll_ick); + omap->usbtll_ick = NULL; + } + + dev_dbg(omap->dev, "Clock to USB host has been disabled\n"); +} + +/*-------------------------------------------------------------------------*/ + +static const struct hc_driver ohci_omap3_hc_driver = { + .description = hcd_name, + .product_desc = "OMAP3 OHCI Host Controller", + .hcd_priv_size = sizeof(struct ohci_hcd), + + /* + * generic hardware linkage + */ + .irq = ohci_irq, + .flags = HCD_USB11 | HCD_MEMORY, + + /* + * basic lifecycle operations + */ + .reset = ohci_omap3_init, + .start = ohci_omap3_start, + .stop = ohci_stop, + .shutdown = ohci_shutdown, + + /* + * managing i/o requests and associated device resources + */ + .urb_enqueue = ohci_urb_enqueue, + .urb_dequeue = ohci_urb_dequeue, + .endpoint_disable = ohci_endpoint_disable, + + /* + * scheduling support + */ + .get_frame_number = ohci_get_frame, + + /* + * root hub support + */ + .hub_status_data = ohci_hub_status_data, + .hub_control = ohci_hub_control, +#ifdef CONFIG_PM + .bus_suspend = ohci_bus_suspend, + .bus_resume = ohci_bus_resume, +#endif + .start_port_reset = ohci_start_port_reset, +}; + +/*-------------------------------------------------------------------------*/ + +/* + * configure so an HC device and id are always provided + * always called with process context; sleeping is OK + */ + +/** + * ohci_hcd_omap3_probe - initialize OMAP-based HCDs + * + * Allocates basic resources for this USB host controller, and + * then invokes the start() method for the HCD associated with it + * through the hotplug entry's driver_data. + */ +static int __devinit ohci_hcd_omap3_probe(struct platform_device *pdev) +{ + struct ohci_hcd_omap_platform_data *pdata = pdev->dev.platform_data; + struct ohci_hcd_omap3 *omap; + struct resource *res; + struct usb_hcd *hcd; + int ret = -ENODEV; + int irq; + + if (usb_disabled()) + goto err_disabled; + + if (!pdata) { + dev_dbg(&pdev->dev, "missing platform_data\n"); + goto err_pdata; + } + + irq = platform_get_irq(pdev, 0); + + omap = kzalloc(sizeof(*omap), GFP_KERNEL); + if (!omap) { + ret = -ENOMEM; + goto err_disabled; + } + + hcd = usb_create_hcd(&ohci_omap3_hc_driver, &pdev->dev, + dev_name(&pdev->dev)); + if (!hcd) { + ret = -ENOMEM; + goto err_create_hcd; + } + + platform_set_drvdata(pdev, omap); + omap->dev = &pdev->dev; + omap->port_mode[0] = pdata->port_mode[0]; + omap->port_mode[1] = pdata->port_mode[1]; + omap->port_mode[2] = pdata->port_mode[2]; + omap->es2_compatibility = pdata->es2_compatibility; + omap->ohci = hcd_to_ohci(hcd); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + hcd->rsrc_start = res->start; + hcd->rsrc_len = resource_size(res); + + hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); + if (!hcd->regs) { + dev_err(&pdev->dev, "OHCI ioremap failed\n"); + ret = -ENOMEM; + goto err_ioremap; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + omap->uhh_base = ioremap(res->start, resource_size(res)); + if (!omap->uhh_base) { + dev_err(&pdev->dev, "UHH ioremap failed\n"); + ret = -ENOMEM; + goto err_uhh_ioremap; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 2); + omap->tll_base = ioremap(res->start, resource_size(res)); + if (!omap->tll_base) { + dev_err(&pdev->dev, "TLL ioremap failed\n"); + ret = -ENOMEM; + goto err_tll_ioremap; + } + + ret = omap3_start_ohci(omap, hcd); + if (ret) { + dev_dbg(&pdev->dev, "failed to start ehci\n"); + goto err_start; + } + + ohci_hcd_init(omap->ohci); + + ret = usb_add_hcd(hcd, irq, IRQF_DISABLED); + if (ret) { + dev_dbg(&pdev->dev, "failed to add hcd with err %d\n", ret); + goto err_add_hcd; + } + + return 0; + +err_add_hcd: + omap3_stop_ohci(omap, hcd); + +err_start: + iounmap(omap->tll_base); + +err_tll_ioremap: + iounmap(omap->uhh_base); + +err_uhh_ioremap: + iounmap(hcd->regs); + +err_ioremap: + usb_put_hcd(hcd); + +err_create_hcd: + kfree(omap); +err_pdata: +err_disabled: + return ret; +} + +/* + * may be called without controller electrically present + * may be called with controller, bus, and devices active + */ + +/** + * ohci_hcd_omap3_remove - shutdown processing for OHCI HCDs + * @pdev: USB Host Controller being removed + * + * Reverses the effect of ohci_hcd_omap3_probe(), first invoking + * the HCD's stop() method. It is always called from a thread + * context, normally "rmmod", "apmd", or something similar. + */ +static int __devexit ohci_hcd_omap3_remove(struct platform_device *pdev) +{ + struct ohci_hcd_omap3 *omap = platform_get_drvdata(pdev); + struct usb_hcd *hcd = ohci_to_hcd(omap->ohci); + + usb_remove_hcd(hcd); + omap3_stop_ohci(omap, hcd); + iounmap(hcd->regs); + iounmap(omap->tll_base); + iounmap(omap->uhh_base); + usb_put_hcd(hcd); + kfree(omap); + + return 0; +} + +static void ohci_hcd_omap3_shutdown(struct platform_device *pdev) +{ + struct ohci_hcd_omap3 *omap = platform_get_drvdata(pdev); + struct usb_hcd *hcd = ohci_to_hcd(omap->ohci); + + if (hcd->driver->shutdown) + hcd->driver->shutdown(hcd); +} + +static struct platform_driver ohci_hcd_omap3_driver = { + .probe = ohci_hcd_omap3_probe, + .remove = __devexit_p(ohci_hcd_omap3_remove), + .shutdown = ohci_hcd_omap3_shutdown, + .driver = { + .name = "ohci-omap3", + }, +}; + +MODULE_ALIAS("platform:ohci-omap3"); +MODULE_AUTHOR("Anand Gadiyar <gadiyar@ti.com>"); |