diff options
Diffstat (limited to 'drivers/usb/host/ohci-sa1111.c')
| -rw-r--r-- | drivers/usb/host/ohci-sa1111.c | 297 |
1 files changed, 142 insertions, 155 deletions
diff --git a/drivers/usb/host/ohci-sa1111.c b/drivers/usb/host/ohci-sa1111.c index 4bde4f9821b..e1004fb37bd 100644 --- a/drivers/usb/host/ohci-sa1111.c +++ b/drivers/usb/host/ohci-sa1111.c @@ -16,29 +16,115 @@ #include <mach/hardware.h> #include <asm/mach-types.h> #include <mach/assabet.h> -#include <mach/badge4.h> #include <asm/hardware/sa1111.h> #ifndef CONFIG_SA1111 #error "This file is SA-1111 bus glue. CONFIG_SA1111 must be defined." #endif -extern int usb_disabled(void); +#define USB_STATUS 0x0118 +#define USB_RESET 0x011c +#define USB_IRQTEST 0x0120 + +#define USB_RESET_FORCEIFRESET (1 << 0) +#define USB_RESET_FORCEHCRESET (1 << 1) +#define USB_RESET_CLKGENRESET (1 << 2) +#define USB_RESET_SIMSCALEDOWN (1 << 3) +#define USB_RESET_USBINTTEST (1 << 4) +#define USB_RESET_SLEEPSTBYEN (1 << 5) +#define USB_RESET_PWRSENSELOW (1 << 6) +#define USB_RESET_PWRCTRLLOW (1 << 7) + +#define USB_STATUS_IRQHCIRMTWKUP (1 << 7) +#define USB_STATUS_IRQHCIBUFFACC (1 << 8) +#define USB_STATUS_NIRQHCIM (1 << 9) +#define USB_STATUS_NHCIMFCLR (1 << 10) +#define USB_STATUS_USBPWRSENSE (1 << 11) -/*-------------------------------------------------------------------------*/ +#if 0 +static void dump_hci_status(struct usb_hcd *hcd, const char *label) +{ + unsigned long status = sa1111_readl(hcd->regs + USB_STATUS); + + dbg("%s USB_STATUS = { %s%s%s%s%s}", label, + ((status & USB_STATUS_IRQHCIRMTWKUP) ? "IRQHCIRMTWKUP " : ""), + ((status & USB_STATUS_IRQHCIBUFFACC) ? "IRQHCIBUFFACC " : ""), + ((status & USB_STATUS_NIRQHCIM) ? "" : "IRQHCIM "), + ((status & USB_STATUS_NHCIMFCLR) ? "" : "HCIMFCLR "), + ((status & USB_STATUS_USBPWRSENSE) ? "USBPWRSENSE " : "")); +} +#endif -static void sa1111_start_hc(struct sa1111_dev *dev) +static int ohci_sa1111_reset(struct usb_hcd *hcd) { - unsigned int usb_rst = 0; + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + + ohci_hcd_init(ohci); + return ohci_init(ohci); +} - printk(KERN_DEBUG "%s: starting SA-1111 OHCI USB Controller\n", - __FILE__); +static int __devinit ohci_sa1111_start(struct usb_hcd *hcd) +{ + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + int ret; -#ifdef CONFIG_SA1100_BADGE4 - if (machine_is_badge4()) { - badge4_set_5V(BADGE4_5V_USB, 1); + ret = ohci_run(ohci); + if (ret < 0) { + ohci_err(ohci, "can't start\n"); + ohci_stop(hcd); } + return ret; +} + +static const struct hc_driver ohci_sa1111_hc_driver = { + .description = hcd_name, + .product_desc = "SA-1111 OHCI", + .hcd_priv_size = sizeof(struct ohci_hcd), + + /* + * generic hardware linkage + */ + .irq = ohci_irq, + .flags = HCD_USB11 | HCD_MEMORY, + + /* + * basic lifecycle operations + */ + .reset = ohci_sa1111_reset, + .start = ohci_sa1111_start, + .stop = ohci_stop, + .shutdown = ohci_shutdown, + + /* + * managing i/o requests and associated device resources + */ + .urb_enqueue = ohci_urb_enqueue, + .urb_dequeue = ohci_urb_dequeue, + .endpoint_disable = ohci_endpoint_disable, + + /* + * scheduling support + */ + .get_frame_number = ohci_get_frame, + + /* + * root hub support + */ + .hub_status_data = ohci_hub_status_data, + .hub_control = ohci_hub_control, +#ifdef CONFIG_PM + .bus_suspend = ohci_bus_suspend, + .bus_resume = ohci_bus_resume, #endif + .start_port_reset = ohci_start_port_reset, +}; + +static int sa1111_start_hc(struct sa1111_dev *dev) +{ + unsigned int usb_rst = 0; + int ret; + + dev_dbg(&dev->dev, "starting SA-1111 OHCI USB Controller\n"); if (machine_is_xp860() || machine_has_neponset() || @@ -51,220 +137,121 @@ static void sa1111_start_hc(struct sa1111_dev *dev) * host controller in reset. */ sa1111_writel(usb_rst | USB_RESET_FORCEIFRESET | USB_RESET_FORCEHCRESET, - dev->mapbase + SA1111_USB_RESET); + dev->mapbase + USB_RESET); /* * Now, carefully enable the USB clock, and take * the USB host controller out of reset. */ - sa1111_enable_device(dev); - udelay(11); - sa1111_writel(usb_rst, dev->mapbase + SA1111_USB_RESET); + ret = sa1111_enable_device(dev); + if (ret == 0) { + udelay(11); + sa1111_writel(usb_rst, dev->mapbase + USB_RESET); + } + + return ret; } static void sa1111_stop_hc(struct sa1111_dev *dev) { unsigned int usb_rst; - printk(KERN_DEBUG "%s: stopping SA-1111 OHCI USB Controller\n", - __FILE__); + + dev_dbg(&dev->dev, "stopping SA-1111 OHCI USB Controller\n"); /* * Put the USB host controller into reset. */ - usb_rst = sa1111_readl(dev->mapbase + SA1111_USB_RESET); + usb_rst = sa1111_readl(dev->mapbase + USB_RESET); sa1111_writel(usb_rst | USB_RESET_FORCEIFRESET | USB_RESET_FORCEHCRESET, - dev->mapbase + SA1111_USB_RESET); + dev->mapbase + USB_RESET); /* * Stop the USB clock. */ sa1111_disable_device(dev); - -#ifdef CONFIG_SA1100_BADGE4 - if (machine_is_badge4()) { - /* Disable power to the USB bus */ - badge4_set_5V(BADGE4_5V_USB, 0); - } -#endif -} - - -/*-------------------------------------------------------------------------*/ - -#if 0 -static void dump_hci_status(struct usb_hcd *hcd, const char *label) -{ - unsigned long status = sa1111_readl(hcd->regs + SA1111_USB_STATUS); - - dbg ("%s USB_STATUS = { %s%s%s%s%s}", label, - ((status & USB_STATUS_IRQHCIRMTWKUP) ? "IRQHCIRMTWKUP " : ""), - ((status & USB_STATUS_IRQHCIBUFFACC) ? "IRQHCIBUFFACC " : ""), - ((status & USB_STATUS_NIRQHCIM) ? "" : "IRQHCIM "), - ((status & USB_STATUS_NHCIMFCLR) ? "" : "HCIMFCLR "), - ((status & USB_STATUS_USBPWRSENSE) ? "USBPWRSENSE " : "")); } -#endif - -/*-------------------------------------------------------------------------*/ - -/* configure so an HC device and id are always provided */ -/* always called with process context; sleeping is OK */ - /** - * usb_hcd_sa1111_probe - initialize SA-1111-based HCDs - * Context: !in_interrupt() + * ohci_hcd_sa1111_probe - initialize SA-1111-based HCDs * * Allocates basic resources for this USB host controller, and - * then invokes the start() method for the HCD associated with it - * through the hotplug entry's driver_data. - * - * Store this function in the HCD's struct pci_driver as probe(). + * then invokes the start() method for the HCD associated with it. */ -int usb_hcd_sa1111_probe (const struct hc_driver *driver, - struct sa1111_dev *dev) +static int ohci_hcd_sa1111_probe(struct sa1111_dev *dev) { struct usb_hcd *hcd; - int retval; + int ret; - hcd = usb_create_hcd (driver, &dev->dev, "sa1111"); + if (usb_disabled()) + return -ENODEV; + + hcd = usb_create_hcd(&ohci_sa1111_hc_driver, &dev->dev, "sa1111"); if (!hcd) return -ENOMEM; + hcd->rsrc_start = dev->res.start; hcd->rsrc_len = resource_size(&dev->res); if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { dbg("request_mem_region failed"); - retval = -EBUSY; + ret = -EBUSY; goto err1; } + hcd->regs = dev->mapbase; - sa1111_start_hc(dev); - ohci_hcd_init(hcd_to_ohci(hcd)); + ret = sa1111_start_hc(dev); + if (ret) + goto err2; - retval = usb_add_hcd(hcd, dev->irq[1], 0); - if (retval == 0) - return retval; + ret = usb_add_hcd(hcd, dev->irq[1], 0); + if (ret == 0) + return ret; sa1111_stop_hc(dev); + err2: release_mem_region(hcd->rsrc_start, hcd->rsrc_len); err1: usb_put_hcd(hcd); - return retval; + return ret; } - -/* may be called without controller electrically present */ -/* may be called with controller, bus, and devices active */ - /** - * usb_hcd_sa1111_remove - shutdown processing for SA-1111-based HCDs + * ohci_hcd_sa1111_remove - shutdown processing for SA-1111-based HCDs * @dev: USB Host Controller being removed - * Context: !in_interrupt() - * - * Reverses the effect of usb_hcd_sa1111_probe(), first invoking - * the HCD's stop() method. It is always called from a thread - * context, normally "rmmod", "apmd", or something similar. * + * Reverses the effect of ohci_hcd_sa1111_probe(), first invoking + * the HCD's stop() method. */ -void usb_hcd_sa1111_remove (struct usb_hcd *hcd, struct sa1111_dev *dev) +static int ohci_hcd_sa1111_remove(struct sa1111_dev *dev) { + struct usb_hcd *hcd = sa1111_get_drvdata(dev); + usb_remove_hcd(hcd); sa1111_stop_hc(dev); release_mem_region(hcd->rsrc_start, hcd->rsrc_len); usb_put_hcd(hcd); -} - -/*-------------------------------------------------------------------------*/ -static int __devinit -ohci_sa1111_start (struct usb_hcd *hcd) -{ - struct ohci_hcd *ohci = hcd_to_ohci (hcd); - int ret; - - if ((ret = ohci_init(ohci)) < 0) - return ret; - - if ((ret = ohci_run (ohci)) < 0) { - err ("can't start %s", hcd->self.bus_name); - ohci_stop (hcd); - return ret; - } return 0; } -/*-------------------------------------------------------------------------*/ - -static const struct hc_driver ohci_sa1111_hc_driver = { - .description = hcd_name, - .product_desc = "SA-1111 OHCI", - .hcd_priv_size = sizeof(struct ohci_hcd), - - /* - * generic hardware linkage - */ - .irq = ohci_irq, - .flags = HCD_USB11 | HCD_MEMORY, - - /* - * basic lifecycle operations - */ - .start = ohci_sa1111_start, - .stop = ohci_stop, - - /* - * managing i/o requests and associated device resources - */ - .urb_enqueue = ohci_urb_enqueue, - .urb_dequeue = ohci_urb_dequeue, - .endpoint_disable = ohci_endpoint_disable, - - /* - * scheduling support - */ - .get_frame_number = ohci_get_frame, - - /* - * root hub support - */ - .hub_status_data = ohci_hub_status_data, - .hub_control = ohci_hub_control, -#ifdef CONFIG_PM - .bus_suspend = ohci_bus_suspend, - .bus_resume = ohci_bus_resume, -#endif - .start_port_reset = ohci_start_port_reset, -}; - -/*-------------------------------------------------------------------------*/ - -static int ohci_hcd_sa1111_drv_probe(struct sa1111_dev *dev) -{ - int ret; - - if (usb_disabled()) - return -ENODEV; - - ret = usb_hcd_sa1111_probe(&ohci_sa1111_hc_driver, dev); - return ret; -} - -static int ohci_hcd_sa1111_drv_remove(struct sa1111_dev *dev) +static void ohci_hcd_sa1111_shutdown(struct sa1111_dev *dev) { struct usb_hcd *hcd = sa1111_get_drvdata(dev); - usb_hcd_sa1111_remove(hcd, dev); - return 0; + if (test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) { + hcd->driver->shutdown(hcd); + sa1111_stop_hc(dev); + } } static struct sa1111_driver ohci_hcd_sa1111_driver = { .drv = { .name = "sa1111-ohci", + .owner = THIS_MODULE, }, .devid = SA1111_DEVID_USB, - .probe = ohci_hcd_sa1111_drv_probe, - .remove = ohci_hcd_sa1111_drv_remove, + .probe = ohci_hcd_sa1111_probe, + .remove = ohci_hcd_sa1111_remove, + .shutdown = ohci_hcd_sa1111_shutdown, }; - |