diff options
Diffstat (limited to 'drivers/usb/host/xhci-hcd.c')
-rw-r--r-- | drivers/usb/host/xhci-hcd.c | 51 |
1 files changed, 17 insertions, 34 deletions
diff --git a/drivers/usb/host/xhci-hcd.c b/drivers/usb/host/xhci-hcd.c index 3a30db6d6ab..5839453d342 100644 --- a/drivers/usb/host/xhci-hcd.c +++ b/drivers/usb/host/xhci-hcd.c @@ -67,22 +67,14 @@ static int handshake(struct xhci_hcd *xhci, void __iomem *ptr, } /* - * Force HC into halt state. - * - * Disable any IRQs and clear the run/stop bit. - * HC will complete any current and actively pipelined transactions, and - * should halt within 16 microframes of the run/stop bit being cleared. - * Read HC Halted bit in the status register to see when the HC is finished. - * XXX: shouldn't we set HC_STATE_HALT here somewhere? + * Disable interrupts and begin the xHCI halting process. */ -int xhci_halt(struct xhci_hcd *xhci) +void xhci_quiesce(struct xhci_hcd *xhci) { u32 halted; u32 cmd; u32 mask; - xhci_dbg(xhci, "// Halt the HC\n"); - /* Disable all interrupts from the host controller */ mask = ~(XHCI_IRQS); halted = xhci_readl(xhci, &xhci->op_regs->status) & STS_HALT; if (!halted) @@ -91,6 +83,21 @@ int xhci_halt(struct xhci_hcd *xhci) cmd = xhci_readl(xhci, &xhci->op_regs->command); cmd &= mask; xhci_writel(xhci, cmd, &xhci->op_regs->command); +} + +/* + * Force HC into halt state. + * + * Disable any IRQs and clear the run/stop bit. + * HC will complete any current and actively pipelined transactions, and + * should halt within 16 microframes of the run/stop bit being cleared. + * Read HC Halted bit in the status register to see when the HC is finished. + * XXX: shouldn't we set HC_STATE_HALT here somewhere? + */ +int xhci_halt(struct xhci_hcd *xhci) +{ + xhci_dbg(xhci, "// Halt the HC\n"); + xhci_quiesce(xhci); return handshake(xhci, &xhci->op_regs->status, STS_HALT, STS_HALT, XHCI_MAX_HALT_USEC); @@ -124,28 +131,6 @@ int xhci_reset(struct xhci_hcd *xhci) return handshake(xhci, &xhci->op_regs->command, CMD_RESET, 0, 250 * 1000); } -/* - * Stop the HC from processing the endpoint queues. - */ -static void xhci_quiesce(struct xhci_hcd *xhci) -{ - /* - * Queues are per endpoint, so we need to disable an endpoint or slot. - * - * To disable a slot, we need to insert a disable slot command on the - * command ring and ring the doorbell. This will also free any internal - * resources associated with the slot (which might not be what we want). - * - * A Release Endpoint command sounds better - doesn't free internal HC - * memory, but removes the endpoints from the schedule and releases the - * bandwidth, disables the doorbells, and clears the endpoint enable - * flag. Usually used prior to a set interface command. - * - * TODO: Implement after command ring code is done. - */ - BUG_ON(!HC_IS_RUNNING(xhci_to_hcd(xhci)->state)); - xhci_dbg(xhci, "Finished quiescing -- code not written yet\n"); -} #if 0 /* Set up MSI-X table for entry 0 (may claim other entries later) */ @@ -490,8 +475,6 @@ void xhci_stop(struct usb_hcd *hcd) struct xhci_hcd *xhci = hcd_to_xhci(hcd); spin_lock_irq(&xhci->lock); - if (HC_IS_RUNNING(hcd->state)) - xhci_quiesce(xhci); xhci_halt(xhci); xhci_reset(xhci); spin_unlock_irq(&xhci->lock); |