summaryrefslogtreecommitdiffstats
path: root/drivers/usb/host/xhci-hub.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/host/xhci-hub.c')
-rw-r--r--drivers/usb/host/xhci-hub.c42
1 files changed, 42 insertions, 0 deletions
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 74bfc868b7a..d5eb357aa5c 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -493,11 +493,48 @@ static void xhci_hub_report_link_state(u32 *status, u32 status_reg)
* when this bit is set.
*/
pls |= USB_PORT_STAT_CONNECTION;
+ } else {
+ /*
+ * If CAS bit isn't set but the Port is already at
+ * Compliance Mode, fake a connection so the USB core
+ * notices the Compliance state and resets the port.
+ * This resolves an issue generated by the SN65LVPE502CP
+ * in which sometimes the port enters compliance mode
+ * caused by a delay on the host-device negotiation.
+ */
+ if (pls == USB_SS_PORT_LS_COMP_MOD)
+ pls |= USB_PORT_STAT_CONNECTION;
}
+
/* update status field */
*status |= pls;
}
+/*
+ * Function for Compliance Mode Quirk.
+ *
+ * This Function verifies if all xhc USB3 ports have entered U0, if so,
+ * the compliance mode timer is deleted. A port won't enter
+ * compliance mode if it has previously entered U0.
+ */
+void xhci_del_comp_mod_timer(struct xhci_hcd *xhci, u32 status, u16 wIndex)
+{
+ u32 all_ports_seen_u0 = ((1 << xhci->num_usb3_ports)-1);
+ bool port_in_u0 = ((status & PORT_PLS_MASK) == XDEV_U0);
+
+ if (!(xhci->quirks & XHCI_COMP_MODE_QUIRK))
+ return;
+
+ if ((xhci->port_status_u0 != all_ports_seen_u0) && port_in_u0) {
+ xhci->port_status_u0 |= 1 << wIndex;
+ if (xhci->port_status_u0 == all_ports_seen_u0) {
+ del_timer_sync(&xhci->comp_mode_recovery_timer);
+ xhci_dbg(xhci, "All USB3 ports have entered U0 already!\n");
+ xhci_dbg(xhci, "Compliance Mode Recovery Timer Deleted.\n");
+ }
+ }
+}
+
int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
u16 wIndex, char *buf, u16 wLength)
{
@@ -651,6 +688,11 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
/* Update Port Link State for super speed ports*/
if (hcd->speed == HCD_USB3) {
xhci_hub_report_link_state(&status, temp);
+ /*
+ * Verify if all USB3 Ports Have entered U0 already.
+ * Delete Compliance Mode Timer if so.
+ */
+ xhci_del_comp_mod_timer(xhci, temp, wIndex);
}
if (bus_state->port_c_suspend & (1 << wIndex))
status |= 1 << USB_PORT_FEAT_C_SUSPEND;