summaryrefslogtreecommitdiffstats
path: root/drivers/usb/host/xhci-ring.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/host/xhci-ring.c')
-rw-r--r--drivers/usb/host/xhci-ring.c142
1 files changed, 55 insertions, 87 deletions
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index bc6fcbc16f6..e692e769c50 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -716,9 +716,7 @@ remove_finished_td:
ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
}
- /* Clear stopped_td if endpoint is not halted */
- if (!(ep->ep_state & EP_HALTED))
- ep->stopped_td = NULL;
+ ep->stopped_td = NULL;
/*
* Drop the lock and complete the URBs in the cancelled TD list.
@@ -1067,9 +1065,8 @@ static void xhci_handle_cmd_reset_ep(struct xhci_hcd *xhci, int slot_id,
false);
xhci_ring_cmd_db(xhci);
} else {
- /* Clear our internal halted state and restart the ring(s) */
+ /* Clear our internal halted state */
xhci->devs[slot_id]->eps[ep_index].ep_state &= ~EP_HALTED;
- ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
}
}
@@ -1733,13 +1730,11 @@ static void xhci_cleanup_halted_endpoint(struct xhci_hcd *xhci,
return;
ep->ep_state |= EP_HALTED;
- ep->stopped_td = td;
ep->stopped_stream = stream_id;
xhci_queue_reset_ep(xhci, command, slot_id, ep_index);
- xhci_cleanup_stalled_ring(xhci, td->urb->dev, ep_index);
+ xhci_cleanup_stalled_ring(xhci, ep_index, td);
- ep->stopped_td = NULL;
ep->stopped_stream = 0;
xhci_ring_cmd_db(xhci);
@@ -1814,81 +1809,65 @@ static int finish_td(struct xhci_hcd *xhci, struct xhci_td *td,
if (skip)
goto td_cleanup;
- if (trb_comp_code == COMP_STOP_INVAL ||
- trb_comp_code == COMP_STOP) {
+ if (trb_comp_code == COMP_STOP_INVAL || trb_comp_code == COMP_STOP) {
/* The Endpoint Stop Command completion will take care of any
* stopped TDs. A stopped TD may be restarted, so don't update
* the ring dequeue pointer or take this TD off any lists yet.
*/
ep->stopped_td = td;
return 0;
+ }
+ if (trb_comp_code == COMP_STALL ||
+ xhci_requires_manual_halt_cleanup(xhci, ep_ctx,
+ trb_comp_code)) {
+ /* Issue a reset endpoint command to clear the host side
+ * halt, followed by a set dequeue command to move the
+ * dequeue pointer past the TD.
+ * The class driver clears the device side halt later.
+ */
+ xhci_cleanup_halted_endpoint(xhci, slot_id, ep_index,
+ ep_ring->stream_id, td, event_trb);
} else {
- if (trb_comp_code == COMP_STALL) {
- /* The transfer is completed from the driver's
- * perspective, but we need to issue a set dequeue
- * command for this stalled endpoint to move the dequeue
- * pointer past the TD. We can't do that here because
- * the halt condition must be cleared first. Let the
- * USB class driver clear the stall later.
- */
- ep->stopped_td = td;
- ep->stopped_stream = ep_ring->stream_id;
- } else if (xhci_requires_manual_halt_cleanup(xhci,
- ep_ctx, trb_comp_code)) {
- /* Other types of errors halt the endpoint, but the
- * class driver doesn't call usb_reset_endpoint() unless
- * the error is -EPIPE. Clear the halted status in the
- * xHCI hardware manually.
- */
- xhci_cleanup_halted_endpoint(xhci,
- slot_id, ep_index, ep_ring->stream_id,
- td, event_trb);
- } else {
- /* Update ring dequeue pointer */
- while (ep_ring->dequeue != td->last_trb)
- inc_deq(xhci, ep_ring);
+ /* Update ring dequeue pointer */
+ while (ep_ring->dequeue != td->last_trb)
inc_deq(xhci, ep_ring);
- }
+ inc_deq(xhci, ep_ring);
+ }
td_cleanup:
- /* Clean up the endpoint's TD list */
- urb = td->urb;
- urb_priv = urb->hcpriv;
-
- /* Do one last check of the actual transfer length.
- * If the host controller said we transferred more data than
- * the buffer length, urb->actual_length will be a very big
- * number (since it's unsigned). Play it safe and say we didn't
- * transfer anything.
- */
- if (urb->actual_length > urb->transfer_buffer_length) {
- xhci_warn(xhci, "URB transfer length is wrong, "
- "xHC issue? req. len = %u, "
- "act. len = %u\n",
- urb->transfer_buffer_length,
- urb->actual_length);
- urb->actual_length = 0;
- if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
- *status = -EREMOTEIO;
- else
- *status = 0;
- }
- list_del_init(&td->td_list);
- /* Was this TD slated to be cancelled but completed anyway? */
- if (!list_empty(&td->cancelled_td_list))
- list_del_init(&td->cancelled_td_list);
-
- urb_priv->td_cnt++;
- /* Giveback the urb when all the tds are completed */
- if (urb_priv->td_cnt == urb_priv->length) {
- ret = 1;
- if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
- xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs--;
- if (xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs
- == 0) {
- if (xhci->quirks & XHCI_AMD_PLL_FIX)
- usb_amd_quirk_pll_enable();
- }
+ /* Clean up the endpoint's TD list */
+ urb = td->urb;
+ urb_priv = urb->hcpriv;
+
+ /* Do one last check of the actual transfer length.
+ * If the host controller said we transferred more data than the buffer
+ * length, urb->actual_length will be a very big number (since it's
+ * unsigned). Play it safe and say we didn't transfer anything.
+ */
+ if (urb->actual_length > urb->transfer_buffer_length) {
+ xhci_warn(xhci, "URB transfer length is wrong, xHC issue? req. len = %u, act. len = %u\n",
+ urb->transfer_buffer_length,
+ urb->actual_length);
+ urb->actual_length = 0;
+ if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
+ *status = -EREMOTEIO;
+ else
+ *status = 0;
+ }
+ list_del_init(&td->td_list);
+ /* Was this TD slated to be cancelled but completed anyway? */
+ if (!list_empty(&td->cancelled_td_list))
+ list_del_init(&td->cancelled_td_list);
+
+ urb_priv->td_cnt++;
+ /* Giveback the urb when all the tds are completed */
+ if (urb_priv->td_cnt == urb_priv->length) {
+ ret = 1;
+ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
+ xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs--;
+ if (xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs == 0) {
+ if (xhci->quirks & XHCI_AMD_PLL_FIX)
+ usb_amd_quirk_pll_enable();
}
}
}
@@ -1958,9 +1937,7 @@ static int process_ctrl_td(struct xhci_hcd *xhci, struct xhci_td *td,
else
td->urb->actual_length = 0;
- xhci_cleanup_halted_endpoint(xhci,
- slot_id, ep_index, 0, td, event_trb);
- return finish_td(xhci, td, event_trb, event, ep, status, true);
+ return finish_td(xhci, td, event_trb, event, ep, status, false);
}
/*
* Did we transfer any data, despite the errors that might have
@@ -2519,17 +2496,8 @@ cleanup:
if (ret) {
urb = td->urb;
urb_priv = urb->hcpriv;
- /* Leave the TD around for the reset endpoint function
- * to use(but only if it's not a control endpoint,
- * since we already queued the Set TR dequeue pointer
- * command for stalled control endpoints).
- */
- if (usb_endpoint_xfer_control(&urb->ep->desc) ||
- (trb_comp_code != COMP_STALL &&
- trb_comp_code != COMP_BABBLE))
- xhci_urb_free_priv(xhci, urb_priv);
- else
- kfree(urb_priv);
+
+ xhci_urb_free_priv(xhci, urb_priv);
usb_hcd_unlink_urb_from_ep(bus_to_hcd(urb->dev->bus), urb);
if ((urb->actual_length != urb->transfer_buffer_length &&
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-22 09:17:16 +0000