diff options
Diffstat (limited to 'drivers/usb/host/xhci.c')
| -rw-r--r-- | drivers/usb/host/xhci.c | 1918 |
1 files changed, 1918 insertions, 0 deletions
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c new file mode 100644 index 00000000000..7e427727390 --- /dev/null +++ b/drivers/usb/host/xhci.c @@ -0,0 +1,1918 @@ +/* + * xHCI host controller driver + * + * Copyright (C) 2008 Intel Corp. + * + * Author: Sarah Sharp + * Some code borrowed from the Linux EHCI driver. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software Foundation, + * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/irq.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/slab.h> + +#include "xhci.h" + +#define DRIVER_AUTHOR "Sarah Sharp" +#define DRIVER_DESC "'eXtensible' Host Controller (xHC) Driver" + +/* Some 0.95 hardware can't handle the chain bit on a Link TRB being cleared */ +static int link_quirk; +module_param(link_quirk, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(link_quirk, "Don't clear the chain bit on a link TRB"); + +/* TODO: copied from ehci-hcd.c - can this be refactored? */ +/* + * handshake - spin reading hc until handshake completes or fails + * @ptr: address of hc register to be read + * @mask: bits to look at in result of read + * @done: value of those bits when handshake succeeds + * @usec: timeout in microseconds + * + * Returns negative errno, or zero on success + * + * Success happens when the "mask" bits have the specified value (hardware + * handshake done). There are two failure modes: "usec" have passed (major + * hardware flakeout), or the register reads as all-ones (hardware removed). + */ +static int handshake(struct xhci_hcd *xhci, void __iomem *ptr, + u32 mask, u32 done, int usec) +{ + u32 result; + + do { + result = xhci_readl(xhci, ptr); + if (result == ~(u32)0) /* card removed */ + return -ENODEV; + result &= mask; + if (result == done) + return 0; + udelay(1); + usec--; + } while (usec > 0); + return -ETIMEDOUT; +} + +/* + * Disable interrupts and begin the xHCI halting process. + */ +void xhci_quiesce(struct xhci_hcd *xhci) +{ + u32 halted; + u32 cmd; + u32 mask; + + mask = ~(XHCI_IRQS); + halted = xhci_readl(xhci, &xhci->op_regs->status) & STS_HALT; + if (!halted) + mask &= ~CMD_RUN; + + cmd = xhci_readl(xhci, &xhci->op_regs->command); + cmd &= mask; + xhci_writel(xhci, cmd, &xhci->op_regs->command); +} + +/* + * Force HC into halt state. + * + * Disable any IRQs and clear the run/stop bit. + * HC will complete any current and actively pipelined transactions, and + * should halt within 16 microframes of the run/stop bit being cleared. + * Read HC Halted bit in the status register to see when the HC is finished. + * XXX: shouldn't we set HC_STATE_HALT here somewhere? + */ +int xhci_halt(struct xhci_hcd *xhci) +{ + xhci_dbg(xhci, "// Halt the HC\n"); + xhci_quiesce(xhci); + + return handshake(xhci, &xhci->op_regs->status, + STS_HALT, STS_HALT, XHCI_MAX_HALT_USEC); +} + +/* + * Reset a halted HC, and set the internal HC state to HC_STATE_HALT. + * + * This resets pipelines, timers, counters, state machines, etc. + * Transactions will be terminated immediately, and operational registers + * will be set to their defaults. + */ +int xhci_reset(struct xhci_hcd *xhci) +{ + u32 command; + u32 state; + + state = xhci_readl(xhci, &xhci->op_regs->status); + if ((state & STS_HALT) == 0) { + xhci_warn(xhci, "Host controller not halted, aborting reset.\n"); + return 0; + } + + xhci_dbg(xhci, "// Reset the HC\n"); + command = xhci_readl(xhci, &xhci->op_regs->command); + command |= CMD_RESET; + xhci_writel(xhci, command, &xhci->op_regs->command); + /* XXX: Why does EHCI set this here? Shouldn't other code do this? */ + xhci_to_hcd(xhci)->state = HC_STATE_HALT; + + return handshake(xhci, &xhci->op_regs->command, CMD_RESET, 0, 250 * 1000); +} + + +#if 0 +/* Set up MSI-X table for entry 0 (may claim other entries later) */ +static int xhci_setup_msix(struct xhci_hcd *xhci) +{ + int ret; + struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller); + + xhci->msix_count = 0; + /* XXX: did I do this right? ixgbe does kcalloc for more than one */ + xhci->msix_entries = kmalloc(sizeof(struct msix_entry), GFP_KERNEL); + if (!xhci->msix_entries) { + xhci_err(xhci, "Failed to allocate MSI-X entries\n"); + return -ENOMEM; + } + xhci->msix_entries[0].entry = 0; + + ret = pci_enable_msix(pdev, xhci->msix_entries, xhci->msix_count); + if (ret) { + xhci_err(xhci, "Failed to enable MSI-X\n"); + goto free_entries; + } + + /* + * Pass the xhci pointer value as the request_irq "cookie". + * If more irqs are added, this will need to be unique for each one. + */ + ret = request_irq(xhci->msix_entries[0].vector, &xhci_irq, 0, + "xHCI", xhci_to_hcd(xhci)); + if (ret) { + xhci_err(xhci, "Failed to allocate MSI-X interrupt\n"); + goto disable_msix; + } + xhci_dbg(xhci, "Finished setting up MSI-X\n"); + return 0; + +disable_msix: + pci_disable_msix(pdev); +free_entries: + kfree(xhci->msix_entries); + xhci->msix_entries = NULL; + return ret; +} + +/* XXX: code duplication; can xhci_setup_msix call this? */ +/* Free any IRQs and disable MSI-X */ +static void xhci_cleanup_msix(struct xhci_hcd *xhci) +{ + struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller); + if (!xhci->msix_entries) + return; + + free_irq(xhci->msix_entries[0].vector, xhci); + pci_disable_msix(pdev); + kfree(xhci->msix_entries); + xhci->msix_entries = NULL; + xhci_dbg(xhci, "Finished cleaning up MSI-X\n"); +} +#endif + +/* + * Initialize memory for HCD and xHC (one-time init). + * + * Program the PAGESIZE register, initialize the device context array, create + * device contexts (?), set up a command ring segment (or two?), create event + * ring (one for now). + */ +int xhci_init(struct usb_hcd *hcd) +{ + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + int retval = 0; + + xhci_dbg(xhci, "xhci_init\n"); + spin_lock_init(&xhci->lock); + if (link_quirk) { + xhci_dbg(xhci, "QUIRK: Not clearing Link TRB chain bits.\n"); + xhci->quirks |= XHCI_LINK_TRB_QUIRK; + } else { + xhci_dbg(xhci, "xHCI doesn't need link TRB QUIRK\n"); + } + retval = xhci_mem_init(xhci, GFP_KERNEL); + xhci_dbg(xhci, "Finished xhci_init\n"); + + return retval; +} + +/* + * Called in interrupt context when there might be work + * queued on the event ring + * + * xhci->lock must be held by caller. + */ +static void xhci_work(struct xhci_hcd *xhci) +{ + u32 temp; + u64 temp_64; + + /* + * Clear the op reg interrupt status first, + * so we can receive interrupts from other MSI-X interrupters. + * Write 1 to clear the interrupt status. + */ + temp = xhci_readl(xhci, &xhci->op_regs->status); + temp |= STS_EINT; + xhci_writel(xhci, temp, &xhci->op_regs->status); + /* FIXME when MSI-X is supported and there are multiple vectors */ + /* Clear the MSI-X event interrupt status */ + + /* Acknowledge the interrupt */ + temp = xhci_readl(xhci, &xhci->ir_set->irq_pending); + temp |= 0x3; + xhci_writel(xhci, temp, &xhci->ir_set->irq_pending); + /* Flush posted writes */ + xhci_readl(xhci, &xhci->ir_set->irq_pending); + + if (xhci->xhc_state & XHCI_STATE_DYING) + xhci_dbg(xhci, "xHCI dying, ignoring interrupt. " + "Shouldn't IRQs be disabled?\n"); + else + /* FIXME this should be a delayed service routine + * that clears the EHB. + */ + xhci_handle_event(xhci); + + /* Clear the event handler busy flag (RW1C); the event ring should be empty. */ + temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue); + xhci_write_64(xhci, temp_64 | ERST_EHB, &xhci->ir_set->erst_dequeue); + /* Flush posted writes -- FIXME is this necessary? */ + xhci_readl(xhci, &xhci->ir_set->irq_pending); +} + +/*-------------------------------------------------------------------------*/ + +/* + * xHCI spec says we can get an interrupt, and if the HC has an error condition, + * we might get bad data out of the event ring. Section 4.10.2.7 has a list of + * indicators of an event TRB error, but we check the status *first* to be safe. + */ +irqreturn_t xhci_irq(struct usb_hcd *hcd) +{ + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + u32 temp, temp2; + union xhci_trb *trb; + + spin_lock(&xhci->lock); + trb = xhci->event_ring->dequeue; + /* Check if the xHC generated the interrupt, or the irq is shared */ + temp = xhci_readl(xhci, &xhci->op_regs->status); + temp2 = xhci_readl(xhci, &xhci->ir_set->irq_pending); + if (temp == 0xffffffff && temp2 == 0xffffffff) + goto hw_died; + + if (!(temp & STS_EINT) && !ER_IRQ_PENDING(temp2)) { + spin_unlock(&xhci->lock); + return IRQ_NONE; + } + xhci_dbg(xhci, "op reg status = %08x\n", temp); + xhci_dbg(xhci, "ir set irq_pending = %08x\n", temp2); + xhci_dbg(xhci, "Event ring dequeue ptr:\n"); + xhci_dbg(xhci, "@%llx %08x %08x %08x %08x\n", + (unsigned long long)xhci_trb_virt_to_dma(xhci->event_ring->deq_seg, trb), + lower_32_bits(trb->link.segment_ptr), + upper_32_bits(trb->link.segment_ptr), + (unsigned int) trb->link.intr_target, + (unsigned int) trb->link.control); + + if (temp & STS_FATAL) { + xhci_warn(xhci, "WARNING: Host System Error\n"); + xhci_halt(xhci); +hw_died: + xhci_to_hcd(xhci)->state = HC_STATE_HALT; + spin_unlock(&xhci->lock); + return -ESHUTDOWN; + } + + xhci_work(xhci); + spin_unlock(&xhci->lock); + + return IRQ_HANDLED; +} + +#ifdef CONFIG_USB_XHCI_HCD_DEBUGGING +void xhci_event_ring_work(unsigned long arg) +{ + unsigned long flags; + int temp; + u64 temp_64; + struct xhci_hcd *xhci = (struct xhci_hcd *) arg; + int i, j; + + xhci_dbg(xhci, "Poll event ring: %lu\n", jiffies); + + spin_lock_irqsave(&xhci->lock, flags); + temp = xhci_readl(xhci, &xhci->op_regs->status); + xhci_dbg(xhci, "op reg status = 0x%x\n", temp); + if (temp == 0xffffffff || (xhci->xhc_state & XHCI_STATE_DYING)) { + xhci_dbg(xhci, "HW died, polling stopped.\n"); + spin_unlock_irqrestore(&xhci->lock, flags); + return; + } + + temp = xhci_readl(xhci, &xhci->ir_set->irq_pending); + xhci_dbg(xhci, "ir_set 0 pending = 0x%x\n", temp); + xhci_dbg(xhci, "No-op commands handled = %d\n", xhci->noops_handled); + xhci_dbg(xhci, "HC error bitmask = 0x%x\n", xhci->error_bitmask); + xhci->error_bitmask = 0; + xhci_dbg(xhci, "Event ring:\n"); + xhci_debug_segment(xhci, xhci->event_ring->deq_seg); + xhci_dbg_ring_ptrs(xhci, xhci->event_ring); + temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue); + temp_64 &= ~ERST_PTR_MASK; + xhci_dbg(xhci, "ERST deq = 64'h%0lx\n", (long unsigned int) temp_64); + xhci_dbg(xhci, "Command ring:\n"); + xhci_debug_segment(xhci, xhci->cmd_ring->deq_seg); + xhci_dbg_ring_ptrs(xhci, xhci->cmd_ring); + xhci_dbg_cmd_ptrs(xhci); + for (i = 0; i < MAX_HC_SLOTS; ++i) { + if (!xhci->devs[i]) + continue; + for (j = 0; j < 31; ++j) { + struct xhci_ring *ring = xhci->devs[i]->eps[j].ring; + if (!ring) + continue; + xhci_dbg(xhci, "Dev %d endpoint ring %d:\n", i, j); + xhci_debug_segment(xhci, ring->deq_seg); + } + } + + if (xhci->noops_submitted != NUM_TEST_NOOPS) + if (xhci_setup_one_noop(xhci)) + xhci_ring_cmd_db(xhci); + spin_unlock_irqrestore(&xhci->lock, flags); + + if (!xhci->zombie) + mod_timer(&xhci->event_ring_timer, jiffies + POLL_TIMEOUT * HZ); + else + xhci_dbg(xhci, "Quit polling the event ring.\n"); +} +#endif + +/* + * Start the HC after it was halted. + * + * This function is called by the USB core when the HC driver is added. + * Its opposite is xhci_stop(). + * + * xhci_init() must be called once before this function can be called. + * Reset the HC, enable device slot contexts, program DCBAAP, and + * set command ring pointer and event ring pointer. + * + * Setup MSI-X vectors and enable interrupts. + */ +int xhci_run(struct usb_hcd *hcd) +{ + u32 temp; + u64 temp_64; + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + void (*doorbell)(struct xhci_hcd *) = NULL; + + hcd->uses_new_polling = 1; + hcd->poll_rh = 0; + + xhci_dbg(xhci, "xhci_run\n"); +#if 0 /* FIXME: MSI not setup yet */ + /* Do this at the very last minute */ + ret = xhci_setup_msix(xhci); + if (!ret) + return ret; + + return -ENOSYS; +#endif +#ifdef CONFIG_USB_XHCI_HCD_DEBUGGING + init_timer(&xhci->event_ring_timer); + xhci->event_ring_timer.data = (unsigned long) xhci; + xhci->event_ring_timer.function = xhci_event_ring_work; + /* Poll the event ring */ + xhci->event_ring_timer.expires = jiffies + POLL_TIMEOUT * HZ; + xhci->zombie = 0; + xhci_dbg(xhci, "Setting event ring polling timer\n"); + add_timer(&xhci->event_ring_timer); +#endif + + xhci_dbg(xhci, "Command ring memory map follows:\n"); + xhci_debug_ring(xhci, xhci->cmd_ring); + xhci_dbg_ring_ptrs(xhci, xhci->cmd_ring); + xhci_dbg_cmd_ptrs(xhci); + + xhci_dbg(xhci, "ERST memory map follows:\n"); + xhci_dbg_erst(xhci, &xhci->erst); + xhci_dbg(xhci, "Event ring:\n"); + xhci_debug_ring(xhci, xhci->event_ring); + xhci_dbg_ring_ptrs(xhci, xhci->event_ring); + temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue); + temp_64 &= ~ERST_PTR_MASK; + xhci_dbg(xhci, "ERST deq = 64'h%0lx\n", (long unsigned int) temp_64); + + xhci_dbg(xhci, "// Set the interrupt modulation register\n"); + temp = xhci_readl(xhci, &xhci->ir_set->irq_control); + temp &= ~ER_IRQ_INTERVAL_MASK; + temp |= (u32) 160; + xhci_writel(xhci, temp, &xhci->ir_set->irq_control); + + /* Set the HCD state before we enable the irqs */ + hcd->state = HC_STATE_RUNNING; + temp = xhci_readl(xhci, &xhci->op_regs->command); + temp |= (CMD_EIE); + xhci_dbg(xhci, "// Enable interrupts, cmd = 0x%x.\n", + temp); + xhci_writel(xhci, temp, &xhci->op_regs->command); + + temp = xhci_readl(xhci, &xhci->ir_set->irq_pending); + xhci_dbg(xhci, "// Enabling event ring interrupter %p by writing 0x%x to irq_pending\n", + xhci->ir_set, (unsigned int) ER_IRQ_ENABLE(temp)); + xhci_writel(xhci, ER_IRQ_ENABLE(temp), + &xhci->ir_set->irq_pending); + xhci_print_ir_set(xhci, xhci->ir_set, 0); + + if (NUM_TEST_NOOPS > 0) + doorbell = xhci_setup_one_noop(xhci); + + temp = xhci_readl(xhci, &xhci->op_regs->command); + temp |= (CMD_RUN); + xhci_dbg(xhci, "// Turn on HC, cmd = 0x%x.\n", + temp); + xhci_writel(xhci, temp, &xhci->op_regs->command); + /* Flush PCI posted writes */ + temp = xhci_readl(xhci, &xhci->op_regs->command); + xhci_dbg(xhci, "// @%p = 0x%x\n", &xhci->op_regs->command, temp); + if (doorbell) + (*doorbell)(xhci); + + xhci_dbg(xhci, "Finished xhci_run\n"); + return 0; +} + +/* + * Stop xHCI driver. + * + * This function is called by the USB core when the HC driver is removed. + * Its opposite is xhci_run(). + * + * Disable device contexts, disable IRQs, and quiesce the HC. + * Reset the HC, finish any completed transactions, and cleanup memory. + */ +void xhci_stop(struct usb_hcd *hcd) +{ + u32 temp; + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + + spin_lock_irq(&xhci->lock); + xhci_halt(xhci); + xhci_reset(xhci); + spin_unlock_irq(&xhci->lock); + +#if 0 /* No MSI yet */ + xhci_cleanup_msix(xhci); +#endif +#ifdef CONFIG_USB_XHCI_HCD_DEBUGGING + /* Tell the event ring poll function not to reschedule */ + xhci->zombie = 1; + del_timer_sync(&xhci->event_ring_timer); +#endif + + xhci_dbg(xhci, "// Disabling event ring interrupts\n"); + temp = xhci_readl(xhci, &xhci->op_regs->status); + xhci_writel(xhci, temp & ~STS_EINT, &xhci->op_regs->status); + temp = xhci_readl(xhci, &xhci->ir_set->irq_pending); + xhci_writel(xhci, ER_IRQ_DISABLE(temp), + &xhci->ir_set->irq_pending); + xhci_print_ir_set(xhci, xhci->ir_set, 0); + + xhci_dbg(xhci, "cleaning up memory\n"); + xhci_mem_cleanup(xhci); + xhci_dbg(xhci, "xhci_stop completed - status = %x\n", + xhci_readl(xhci, &xhci->op_regs->status)); +} + +/* + * Shutdown HC (not bus-specific) + * + * This is called when the machine is rebooting or halting. We assume that the + * machine will be powered off, and the HC's internal state will be reset. + * Don't bother to free memory. + */ +void xhci_shutdown(struct usb_hcd *hcd) +{ + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + + spin_lock_irq(&xhci->lock); + xhci_halt(xhci); + spin_unlock_irq(&xhci->lock); + +#if 0 + xhci_cleanup_msix(xhci); +#endif + + xhci_dbg(xhci, "xhci_shutdown completed - status = %x\n", + xhci_readl(xhci, &xhci->op_regs->status)); +} + +/*-------------------------------------------------------------------------*/ + +/** + * xhci_get_endpoint_index - Used for passing endpoint bitmasks between the core and + * HCDs. Find the index for an endpoint given its descriptor. Use the return + * value to right shift 1 for the bitmask. + * + * Index = (epnum * 2) + direction - 1, + * where direction = 0 for OUT, 1 for IN. + * For control endpoints, the IN index is used (OUT index is unused), so + * index = (epnum * 2) + direction - 1 = (epnum * 2) + 1 - 1 = (epnum * 2) + */ +unsigned int xhci_get_endpoint_index(struct usb_endpoint_descriptor *desc) +{ + unsigned int index; + if (usb_endpoint_xfer_control(desc)) + index = (unsigned int) (usb_endpoint_num(desc)*2); + else + index = (unsigned int) (usb_endpoint_num(desc)*2) + + (usb_endpoint_dir_in(desc) ? 1 : 0) - 1; + return index; +} + +/* Find the flag for this endpoint (for use in the control context). Use the + * endpoint index to create a bitmask. The slot context is bit 0, endpoint 0 is + * bit 1, etc. + */ +unsigned int xhci_get_endpoint_flag(struct usb_endpoint_descriptor *desc) +{ + return 1 << (xhci_get_endpoint_index(desc) + 1); +} + +/* Find the flag for this endpoint (for use in the control context). Use the + * endpoint index to create a bitmask. The slot context is bit 0, endpoint 0 is + * bit 1, etc. + */ +unsigned int xhci_get_endpoint_flag_from_index(unsigned int ep_index) +{ + return 1 << (ep_index + 1); +} + +/* Compute the last valid endpoint context index. Basically, this is the + * endpoint index plus one. For slot contexts with more than valid endpoint, + * we find the most significant bit set in the added contexts flags. + * e.g. ep 1 IN (with epnum 0x81) => added_ctxs = 0b1000 + * fls(0b1000) = 4, but the endpoint context index is 3, so subtract one. + */ +unsigned int xhci_last_valid_endpoint(u32 added_ctxs) +{ + return fls(added_ctxs) - 1; +} + +/* Returns 1 if the arguments are OK; + * returns 0 this is a root hub; returns -EINVAL for NULL pointers. + */ +int xhci_check_args(struct usb_hcd *hcd, struct usb_device *udev, + struct usb_host_endpoint *ep, int check_ep, const char *func) { + if (!hcd || (check_ep && !ep) || !udev) { + printk(KERN_DEBUG "xHCI %s called with invalid args\n", + func); + return -EINVAL; + } + if (!udev->parent) { + printk(KERN_DEBUG "xHCI %s called for root hub\n", + func); + return 0; + } + if (!udev->slot_id) { + printk(KERN_DEBUG "xHCI %s called with unaddressed device\n", + func); + return -EINVAL; + } + return 1; +} + +static int xhci_configure_endpoint(struct xhci_hcd *xhci, + struct usb_device *udev, struct xhci_command *command, + bool ctx_change, bool must_succeed); + +/* + * Full speed devices may have a max packet size greater than 8 bytes, but the + * USB core doesn't know that until it reads the first 8 bytes of the + * descriptor. If the usb_device's max packet size changes after that point, + * we need to issue an evaluate context command and wait on it. + */ +static int xhci_check_maxpacket(struct xhci_hcd *xhci, unsigned int slot_id, + unsigned int ep_index, struct urb *urb) +{ + struct xhci_container_ctx *in_ctx; + struct xhci_container_ctx *out_ctx; + struct xhci_input_control_ctx *ctrl_ctx; + struct xhci_ep_ctx *ep_ctx; + int max_packet_size; + int hw_max_packet_size; + int ret = 0; + + out_ctx = xhci->devs[slot_id]->out_ctx; + ep_ctx = xhci_get_ep_ctx(xhci, out_ctx, ep_index); + hw_max_packet_size = MAX_PACKET_DECODED(ep_ctx->ep_info2); + max_packet_size = urb->dev->ep0.desc.wMaxPacketSize; + if (hw_max_packet_size != max_packet_size) { + xhci_dbg(xhci, "Max Packet Size for ep 0 changed.\n"); + xhci_dbg(xhci, "Max packet size in usb_device = %d\n", + max_packet_size); + xhci_dbg(xhci, "Max packet size in xHCI HW = %d\n", + hw_max_packet_size); + xhci_dbg(xhci, "Issuing evaluate context command.\n"); + + /* Set up the modified control endpoint 0 */ + xhci_endpoint_copy(xhci, xhci->devs[slot_id]->in_ctx, + xhci->devs[slot_id]->out_ctx, ep_index); + in_ctx = xhci->devs[slot_id]->in_ctx; + ep_ctx = xhci_get_ep_ctx(xhci, in_ctx, ep_index); + ep_ctx->ep_info2 &= ~MAX_PACKET_MASK; + ep_ctx->ep_info2 |= MAX_PACKET(max_packet_size); + + /* Set up the input context flags for the command */ + /* FIXME: This won't work if a non-default control endpoint + * changes max packet sizes. + */ + ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx); + ctrl_ctx->add_flags = EP0_FLAG; + ctrl_ctx->drop_flags = 0; + + xhci_dbg(xhci, "Slot %d input context\n", slot_id); + xhci_dbg_ctx(xhci, in_ctx, ep_index); + xhci_dbg(xhci, "Slot %d output context\n", slot_id); + xhci_dbg_ctx(xhci, out_ctx, ep_index); + + ret = xhci_configure_endpoint(xhci, urb->dev, NULL, + true, false); + + /* Clean up the input context for later use by bandwidth + * functions. + */ + ctrl_ctx->add_flags = SLOT_FLAG; + } + return ret; +} + +/* + * non-error returns are a promise to giveback() the urb later + * we drop ownership so next owner (or urb unlink) can get it + */ +int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags) +{ + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + unsigned long flags; + int ret = 0; + unsigned int slot_id, ep_index; + + + if (!urb || xhci_check_args(hcd, urb->dev, urb->ep, true, __func__) <= 0) + return -EINVAL; + + slot_id = urb->dev->slot_id; + ep_index = xhci_get_endpoint_index(&urb->ep->desc); + + if (!xhci->devs || !xhci->devs[slot_id]) { + if (!in_interrupt()) + dev_warn(&urb->dev->dev, "WARN: urb submitted for dev with no Slot ID\n"); + ret = -EINVAL; + goto exit; + } + if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) { + if (!in_interrupt()) + xhci_dbg(xhci, "urb submitted during PCI suspend\n"); + ret = -ESHUTDOWN; + goto exit; + } + if (usb_endpoint_xfer_control(&urb->ep->desc)) { + /* Check to see if the max packet size for the default control + * endpoint changed during FS device enumeration + */ + if (urb->dev->speed == USB_SPEED_FULL) { + ret = xhci_check_maxpacket(xhci, slot_id, + ep_index, urb); + if (ret < 0) + return ret; + } + + /* We have a spinlock and interrupts disabled, so we must pass + * atomic context to this function, which may allocate memory. + */ + spin_lock_irqsave(&xhci->lock, flags); + if (xhci->xhc_state & XHCI_STATE_DYING) + goto dying; + ret = xhci_queue_ctrl_tx(xhci, GFP_ATOMIC, urb, + slot_id, ep_index); + spin_unlock_irqrestore(&xhci->lock, flags); + } else if (usb_endpoint_xfer_bulk(&urb->ep->desc)) { + spin_lock_irqsave(&xhci->lock, flags); + if (xhci->xhc_state & XHCI_STATE_DYING) + goto dying; + ret = xhci_queue_bulk_tx(xhci, GFP_ATOMIC, urb, + slot_id, ep_index); + spin_unlock_irqrestore(&xhci->lock, flags); + } else if (usb_endpoint_xfer_int(&urb->ep->desc)) { + spin_lock_irqsave(&xhci->lock, flags); + if (xhci->xhc_state & XHCI_STATE_DYING) + goto dying; + ret = xhci_queue_intr_tx(xhci, GFP_ATOMIC, urb, + slot_id, ep_index); + spin_unlock_irqrestore(&xhci->lock, flags); + } else { + ret = -EINVAL; + } +exit: + return ret; +dying: + xhci_dbg(xhci, "Ep 0x%x: URB %p submitted for " + "non-responsive xHCI host.\n", + urb->ep->desc.bEndpointAddress, urb); + spin_unlock_irqrestore(&xhci->lock, flags); + return -ESHUTDOWN; +} + +/* + * Remove the URB's TD from the endpoint ring. This may cause the HC to stop + * USB transfers, potentially stopping in the middle of a TRB buffer. The HC + * should pick up where it left off in the TD, unless a Set Transfer Ring + * Dequeue Pointer is issued. + * + * The TRBs that make up the buffers for the canceled URB will be "removed" from + * the ring. Since the ring is a contiguous structure, they can't be physically + * removed. Instead, there are two options: + * + * 1) If the HC is in the middle of processing the URB to be canceled, we + * simply move the ring's dequeue pointer past those TRBs using the Set + * Transfer Ring Dequeue Pointer command. This will be the common case, + * when drivers timeout on the last submitted URB and attempt to cancel. + * + * 2) If the HC is in the middle of a different TD, we turn the TRBs into a + * series of 1-TRB transfer no-op TDs. (No-ops shouldn't be chained.) The + * HC will need to invalidate the any TRBs it has cached after the stop + * endpoint command, as noted in the xHCI 0.95 errata. + * + * 3) The TD may have completed by the time the Stop Endpoint Command + * completes, so software needs to handle that case too. + * + * This function should protect against the TD enqueueing code ringing the + * doorbell while this code is waiting for a Stop Endpoint command to complete. + * It also needs to account for multiple cancellations on happening at the same + * time for the same endpoint. + * + * Note that this function can be called in any context, or so says + * usb_hcd_unlink_urb() + */ +int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) +{ + unsigned long flags; + int ret; + u32 temp; + struct xhci_hcd *xhci; + struct xhci_td *td; + unsigned int ep_index; + struct xhci_ring *ep_ring; + struct xhci_virt_ep *ep; + + xhci = hcd_to_xhci(hcd); + spin_lock_irqsave(&xhci->lock, flags); + /* Make sure the URB hasn't completed or been unlinked already */ + ret = usb_hcd_check_unlink_urb(hcd, urb, status); + if (ret || !urb->hcpriv) + goto done; + temp = xhci_readl(xhci, &xhci->op_regs->status); + if (temp == 0xffffffff) { + xhci_dbg(xhci, "HW died, freeing TD.\n"); + td = (struct xhci_td *) urb->hcpriv; + + usb_hcd_unlink_urb_from_ep(hcd, urb); + spin_unlock_irqrestore(&xhci->lock, flags); + usb_hcd_giveback_urb(xhci_to_hcd(xhci), urb, -ESHUTDOWN); + kfree(td); + return ret; + } + if (xhci->xhc_state & XHCI_STATE_DYING) { + xhci_dbg(xhci, "Ep 0x%x: URB %p to be canceled on " + "non-responsive xHCI host.\n", + urb->ep->desc.bEndpointAddress, urb); + /* Let the stop endpoint command watchdog timer (which set this + * state) finish cleaning up the endpoint TD lists. We must + * have caught it in the middle of dropping a lock and giving + * back an URB. + */ + goto done; + } + + xhci_dbg(xhci, "Cancel URB %p\n", urb); + xhci_dbg(xhci, "Event ring:\n"); + xhci_debug_ring(xhci, xhci->event_ring); + ep_index = xhci_get_endpoint_index(&urb->ep->desc); + ep = &xhci->devs[urb->dev->slot_id]->eps[ep_index]; + ep_ring = ep->ring; + xhci_dbg(xhci, "Endpoint ring:\n"); + xhci_debug_ring(xhci, ep_ring); + td = (struct xhci_td *) urb->hcpriv; + + list_add_tail(&td->cancelled_td_list, &ep->cancelled_td_list); + /* Queue a stop endpoint command, but only if this is + * the first cancellation to be handled. + */ + if (!(ep->ep_state & EP_HALT_PENDING)) { + ep->ep_state |= EP_HALT_PENDING; + ep->stop_cmds_pending++; + ep->stop_cmd_timer.expires = jiffies + + XHCI_STOP_EP_CMD_TIMEOUT * HZ; + add_timer(&ep->stop_cmd_timer); + xhci_queue_stop_endpoint(xhci, urb->dev->slot_id, ep_index); + xhci_ring_cmd_db(xhci); + } +done: + spin_unlock_irqrestore(&xhci->lock, flags); + return ret; +} + +/* Drop an endpoint from a new bandwidth configuration for this device. + * Only one call to this function is allowed per endpoint before + * check_bandwidth() or reset_bandwidth() must be called. + * A call to xhci_drop_endpoint() followed by a call to xhci_add_endpoint() will + * add the endpoint to the schedule with possibly new parameters denoted by a + * different endpoint descriptor in usb_host_endpoint. + * A call to xhci_add_endpoint() followed by a call to xhci_drop_endpoint() is + * not allowed. + * + * The USB core will not allow URBs to be queued to an endpoint that is being + * disabled, so there's no need for mutual exclusion to protect + * the xhci->devs[slot_id] structure. + */ +int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev, + struct usb_host_endpoint *ep) +{ + struct xhci_hcd *xhci; + struct xhci_container_ctx *in_ctx, *out_ctx; + struct xhci_input_control_ctx *ctrl_ctx; + struct xhci_slot_ctx *slot_ctx; + unsigned int last_ctx; + unsigned int ep_index; + struct xhci_ep_ctx *ep_ctx; + u32 drop_flag; + u32 new_add_flags, new_drop_flags, new_slot_info; + int ret; + + ret = xhci_check_args(hcd, udev, ep, 1, __func__); + if (ret <= 0) + return ret; + xhci = hcd_to_xhci(hcd); + xhci_dbg(xhci, "%s called for udev %p\n", __func__, udev); + + drop_flag = xhci_get_endpoint_flag(&ep->desc); + if (drop_flag == SLOT_FLAG || drop_flag == EP0_FLAG) { + xhci_dbg(xhci, "xHCI %s - can't drop slot or ep 0 %#x\n", + __func__, drop_flag); + return 0; + } + + if (!xhci->devs || !xhci->devs[udev->slot_id]) { + xhci_warn(xhci, "xHCI %s called with unaddressed device\n", + __func__); + return -EINVAL; + } + + in_ctx = xhci->devs[udev->slot_id]->in_ctx; + out_ctx = xhci->devs[udev->slot_id]->out_ctx; + ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx); + ep_index = xhci_get_endpoint_index(&ep->desc); + ep_ctx = xhci_get_ep_ctx(xhci, out_ctx, ep_index); + /* If the HC already knows the endpoint is disabled, + * or the HCD has noted it is disabled, ignore this request + */ + if ((ep_ctx->ep_info & EP_STATE_MASK) == EP_STATE_DISABLED || + ctrl_ctx->drop_flags & xhci_get_endpoint_flag(&ep->desc)) { + xhci_warn(xhci, "xHCI %s called with disabled ep %p\n", + __func__, ep); + return 0; + } + + ctrl_ctx->drop_flags |= drop_flag; + new_drop_flags = ctrl_ctx->drop_flags; + + ctrl_ctx->add_flags &= ~drop_flag; + new_add_flags = ctrl_ctx->add_flags; + + last_ctx = xhci_last_valid_endpoint(ctrl_ctx->add_flags); + slot_ctx = xhci_get_slot_ctx(xhci, in_ctx); + /* Update the last valid endpoint context, if we deleted the last one */ + if ((slot_ctx->dev_info & LAST_CTX_MASK) > LAST_CTX(last_ctx)) { + slot_ctx->dev_info &= ~LAST_CTX_MASK; + slot_ctx->dev_info |= LAST_CTX(last_ctx); + } + new_slot_info = slot_ctx->dev_info; + + xhci_endpoint_zero(xhci, xhci->devs[udev->slot_id], ep); + + xhci_dbg(xhci, "drop ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x, new slot info = %#x\n", + (unsigned int) ep->desc.bEndpointAddress, + udev->slot_id, + (unsigned int) new_drop_flags, + (unsigned int) new_add_flags, + (unsigned int) new_slot_info); + return 0; +} + +/* Add an endpoint to a new possible bandwidth configuration for this device. + * Only one call to this function is allowed per endpoint before + * check_bandwidth() or reset_bandwidth() must be called. + * A call to xhci_drop_endpoint() followed by a call to xhci_add_endpoint() will + * add the endpoint to the schedule with possibly new parameters denoted by a + * different endpoint descriptor in usb_host_endpoint. + * A call to xhci_add_endpoint() followed by a call to xhci_drop_endpoint() is + * not allowed. + * + * The USB core will not allow URBs to be queued to an endpoint until the + * configuration or alt setting is installed in the device, so there's no need + * for mutual exclusion to protect the xhci->devs[slot_id] structure. + */ +int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, + struct usb_host_endpoint *ep) +{ + struct xhci_hcd *xhci; + struct xhci_container_ctx *in_ctx, *out_ctx; + unsigned int ep_index; + struct xhci_ep_ctx *ep_ctx; + struct xhci_slot_ctx *slot_ctx; + struct xhci_input_control_ctx *ctrl_ctx; + u32 added_ctxs; + unsigned int last_ctx; + u32 new_add_flags, new_drop_flags, new_slot_info; + int ret = 0; + + ret = xhci_check_args(hcd, udev, ep, 1, __func__); + if (ret <= 0) { + /* So we won't queue a reset ep command for a root hub */ + ep->hcpriv = NULL; + return ret; + } + xhci = hcd_to_xhci(hcd); + + added_ctxs = xhci_get_endpoint_flag(&ep->desc); + last_ctx = xhci_last_valid_endpoint(added_ctxs); + if (added_ctxs == SLOT_FLAG || added_ctxs == EP0_FLAG) { + /* FIXME when we have to issue an evaluate endpoint command to + * deal with ep0 max packet size changing once we get the + * descriptors + */ + xhci_dbg(xhci, "xHCI %s - can't add slot or ep 0 %#x\n", + __func__, added_ctxs); + return 0; + } + + if (!xhci->devs || !xhci->devs[udev->slot_id]) { + xhci_warn(xhci, "xHCI %s called with unaddressed device\n", + __func__); + return -EINVAL; + } + + in_ctx = xhci->devs[udev->slot_id]->in_ctx; + out_ctx = xhci->devs[udev->slot_id]->out_ctx; + ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx); + ep_index = xhci_get_endpoint_index(&ep->desc); + ep_ctx = xhci_get_ep_ctx(xhci, out_ctx, ep_index); + /* If the HCD has already noted the endpoint is enabled, + * ignore this request. + */ + if (ctrl_ctx->add_flags & xhci_get_endpoint_flag(&ep->desc)) { + xhci_warn(xhci, "xHCI %s called with enabled ep %p\n", + __func__, ep); + return 0; + } + + /* + * Configuration and alternate setting changes must be done in + * process context, not interrupt context (or so documenation + * for usb_set_interface() and usb_set_configuration() claim). + */ + if (xhci_endpoint_init(xhci, xhci->devs[udev->slot_id], + udev, ep, GFP_NOIO) < 0) { + dev_dbg(&udev->dev, "%s - could not initialize ep %#x\n", + __func__, ep->desc.bEndpointAddress); + return -ENOMEM; + } + + ctrl_ctx->add_flags |= added_ctxs; + new_add_flags = ctrl_ctx->add_flags; + + /* If xhci_endpoint_disable() was called for this endpoint, but the + * xHC hasn't been notified yet through the check_bandwidth() call, + * this re-adds a new state for the endpoint from the new endpoint + * descriptors. We must drop and re-add this endpoint, so we leave the + * drop flags alone. + */ + new_drop_flags = ctrl_ctx->drop_flags; + + slot_ctx = xhci_get_slot_ctx(xhci, in_ctx); + /* Update the last valid endpoint context, if we just added one past */ + if ((slot_ctx->dev_info & LAST_CTX_MASK) < LAST_CTX(last_ctx)) { + slot_ctx->dev_info &= ~LAST_CTX_MASK; + slot_ctx->dev_info |= LAST_CTX(last_ctx); + } + new_slot_info = slot_ctx->dev_info; + + /* Store the usb_device pointer for later use */ + ep->hcpriv = udev; + + xhci_dbg(xhci, "add ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x, new slot info = %#x\n", + (unsigned int) ep->desc.bEndpointAddress, + udev->slot_id, + (unsigned int) new_drop_flags, + (unsigned int) new_add_flags, + (unsigned int) new_slot_info); + return 0; +} + +static void xhci_zero_in_ctx(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev) +{ + struct xhci_input_control_ctx *ctrl_ctx; + struct xhci_ep_ctx *ep_ctx; + struct xhci_slot_ctx *slot_ctx; + int i; + + /* When a device's add flag and drop flag are zero, any subsequent + * configure endpoint command will leave that endpoint's state + * untouched. Make sure we don't leave any old state in the input + * endpoint contexts. + */ + ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx); + ctrl_ctx->drop_flags = 0; + ctrl_ctx->add_flags = 0; + slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx); + slot_ctx->dev_info &= ~LAST_CTX_MASK; + /* Endpoint 0 is always valid */ + slot_ctx->dev_info |= LAST_CTX(1); + for (i = 1; i < 31; ++i) { + ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, i); + ep_ctx->ep_info = 0; + ep_ctx->ep_info2 = 0; + ep_ctx->deq = 0; + ep_ctx->tx_info = 0; + } +} + +static int xhci_configure_endpoint_result(struct xhci_hcd *xhci, + struct usb_device *udev, int *cmd_status) +{ + int ret; + + switch (*cmd_status) { + case COMP_ENOMEM: + dev_warn(&udev->dev, "Not enough host controller resources " + "for new device state.\n"); + ret = -ENOMEM; + /* FIXME: can we allocate more resources for the HC? */ + break; + case COMP_BW_ERR: + dev_warn(&udev->dev, "Not enough bandwidth " + "for new device state.\n"); + ret = -ENOSPC; + /* FIXME: can we go back to the old state? */ + break; + case COMP_TRB_ERR: + /* the HCD set up something wrong */ + dev_warn(&udev->dev, "ERROR: Endpoint drop flag = 0, " + "add flag = 1, " + "and endpoint is not disabled.\n"); + ret = -EINVAL; + break; + case COMP_SUCCESS: + dev_dbg(&udev->dev, "Successful Endpoint Configure command\n"); + ret = 0; + break; + default: + xhci_err(xhci, "ERROR: unexpected command completion " + "code 0x%x.\n", *cmd_status); + ret = -EINVAL; + break; + } + return ret; +} + +static int xhci_evaluate_context_result(struct xhci_hcd *xhci, + struct usb_device *udev, int *cmd_status) +{ + int ret; + struct xhci_virt_device *virt_dev = xhci->devs[udev->slot_id]; + + switch (*cmd_status) { + case COMP_EINVAL: + dev_warn(&udev->dev, "WARN: xHCI driver setup invalid evaluate " + "context command.\n"); + ret = -EINVAL; + break; + case COMP_EBADSLT: + dev_warn(&udev->dev, "WARN: slot not enabled for" + "evaluate context command.\n"); + case COMP_CTX_STATE: + dev_warn(&udev->dev, "WARN: invalid context state for " + "evaluate context command.\n"); + xhci_dbg_ctx(xhci, virt_dev->out_ctx, 1); + ret = -EINVAL; + break; + case COMP_SUCCESS: + dev_dbg(&udev->dev, "Successful evaluate context command\n"); + ret = 0; + break; + default: + xhci_err(xhci, "ERROR: unexpected command completion " + "code 0x%x.\n", *cmd_status); + ret = -EINVAL; + break; + } + return ret; +} + +/* Issue a configure endpoint command or evaluate context command + * and wait for it to finish. + */ +static int xhci_configure_endpoint(struct xhci_hcd *xhci, + struct usb_device *udev, + struct xhci_command *command, + bool ctx_change, bool must_succeed) +{ + int ret; + int timeleft; + unsigned long flags; + struct xhci_container_ctx *in_ctx; + struct completion *cmd_completion; + int *cmd_status; + struct xhci_virt_device *virt_dev; + + spin_lock_irqsave(&xhci->lock, flags); + virt_dev = xhci->devs[udev->slot_id]; + if (command) { + in_ctx = command->in_ctx; + cmd_completion = command->completion; + cmd_status = &command->status; + command->command_trb = xhci->cmd_ring->enqueue; + list_add_tail(&command->cmd_list, &virt_dev->cmd_list); + } else { + in_ctx = virt_dev->in_ctx; + cmd_completion = &virt_dev->cmd_completion; + cmd_status = &virt_dev->cmd_status; + } + init_completion(cmd_completion); + + if (!ctx_change) + ret = xhci_queue_configure_endpoint(xhci, in_ctx->dma, + udev->slot_id, must_succeed); + else + ret = xhci_queue_evaluate_context(xhci, in_ctx->dma, + udev->slot_id); + if (ret < 0) { + if (command) + list_del(&command->cmd_list); + spin_unlock_irqrestore(&xhci->lock, flags); + xhci_dbg(xhci, "FIXME allocate a new ring segment\n"); + return -ENOMEM; + } + xhci_ring_cmd_db(xhci); + spin_unlock_irqrestore(&xhci->lock, flags); + + /* Wait for the configure endpoint command to complete */ + timeleft = wait_for_completion_interruptible_timeout( + cmd_completion, + USB_CTRL_SET_TIMEOUT); + if (timeleft <= 0) { + xhci_warn(xhci, "%s while waiting for %s command\n", + timeleft == 0 ? "Timeout" : "Signal", + ctx_change == 0 ? + "configure endpoint" : + "evaluate context"); + /* FIXME cancel the configure endpoint command */ + return -ETIME; + } + + if (!ctx_change) + return xhci_configure_endpoint_result(xhci, udev, cmd_status); + return xhci_evaluate_context_result(xhci, udev, cmd_status); +} + +/* Called after one or more calls to xhci_add_endpoint() or + * xhci_drop_endpoint(). If this call fails, the USB core is expected + * to call xhci_reset_bandwidth(). + * + * Since we are in the middle of changing either configuration or + * installing a new alt setting, the USB core won't allow URBs to be + * enqueued for any endpoint on the old config or interface. Nothing + * else should be touching the xhci->devs[slot_id] structure, so we + * don't need to take the xhci->lock for manipulating that. + */ +int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev) +{ + int i; + int ret = 0; + struct xhci_hcd *xhci; + struct xhci_virt_device *virt_dev; + struct xhci_input_control_ctx *ctrl_ctx; + struct xhci_slot_ctx *slot_ctx; + + ret = xhci_check_args(hcd, udev, NULL, 0, __func__); + if (ret <= 0) + return ret; + xhci = hcd_to_xhci(hcd); + + if (!udev->slot_id || !xhci->devs || !xhci->devs[udev->slot_id]) { + xhci_warn(xhci, "xHCI %s called with unaddressed device\n", + __func__); + return -EINVAL; + } + xhci_dbg(xhci, "%s called for udev %p\n", __func__, udev); + virt_dev = xhci->devs[udev->slot_id]; + + /* See section 4.6.6 - A0 = 1; A1 = D0 = D1 = 0 */ + ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx); + ctrl_ctx->add_flags |= SLOT_FLAG; + ctrl_ctx->add_flags &= ~EP0_FLAG; + ctrl_ctx->drop_flags &= ~SLOT_FLAG; + ctrl_ctx->drop_flags &= ~EP0_FLAG; + xhci_dbg(xhci, "New Input Control Context:\n"); + slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx); + xhci_dbg_ctx(xhci, virt_dev->in_ctx, + LAST_CTX_TO_EP_NUM(slot_ctx->dev_info)); + + ret = xhci_configure_endpoint(xhci, udev, NULL, + false, false); + if (ret) { + /* Callee should call reset_bandwidth() */ + return ret; + } + + xhci_dbg(xhci, "Output context after successful config ep cmd:\n"); + xhci_dbg_ctx(xhci, virt_dev->out_ctx, + LAST_CTX_TO_EP_NUM(slot_ctx->dev_info)); + + xhci_zero_in_ctx(xhci, virt_dev); + /* Install new rings and free or cache any old rings */ + for (i = 1; i < 31; ++i) { + if (!virt_dev->eps[i].new_ring) + continue; + /* Only cache or free the old ring if it exists. + * It may not if this is the first add of an endpoint. + */ + if (virt_dev->eps[i].ring) { + xhci_free_or_cache_endpoint_ring(xhci, virt_dev, i); + } + virt_dev->eps[i].ring = virt_dev->eps[i].new_ring; + virt_dev->eps[i].new_ring = NULL; + } + + return ret; +} + +void xhci_reset_bandwidth(struct usb_hcd *hcd, struct usb_device *udev) +{ + struct xhci_hcd *xhci; + struct xhci_virt_device *virt_dev; + int i, ret; + + ret = xhci_check_args(hcd, udev, NULL, 0, __func__); + if (ret <= 0) + return; + xhci = hcd_to_xhci(hcd); + + if (!xhci->devs || !xhci->devs[udev->slot_id]) { + xhci_warn(xhci, "xHCI %s called with unaddressed device\n", + __func__); + return; + } + xhci_dbg(xhci, "%s called for udev %p\n", __func__, udev); + virt_dev = xhci->devs[udev->slot_id]; + /* Free any rings allocated for added endpoints */ + for (i = 0; i < 31; ++i) { + if (virt_dev->eps[i].new_ring) { + xhci_ring_free(xhci, virt_dev->eps[i].new_ring); + virt_dev->eps[i].new_ring = NULL; + } + } + xhci_zero_in_ctx(xhci, virt_dev); +} + +static void xhci_setup_input_ctx_for_config_ep(struct xhci_hcd *xhci, + struct xhci_container_ctx *in_ctx, + struct xhci_container_ctx *out_ctx, + u32 add_flags, u32 drop_flags) +{ + struct xhci_input_control_ctx *ctrl_ctx; + ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx); + ctrl_ctx->add_flags = add_flags; + ctrl_ctx->drop_flags = drop_flags; + xhci_slot_copy(xhci, in_ctx, out_ctx); + ctrl_ctx->add_flags |= SLOT_FLAG; + + xhci_dbg(xhci, "Input Context:\n"); + xhci_dbg_ctx(xhci, in_ctx, xhci_last_valid_endpoint(add_flags)); +} + +void xhci_setup_input_ctx_for_quirk(struct xhci_hcd *xhci, + unsigned int slot_id, unsigned int ep_index, + struct xhci_dequeue_state *deq_state) +{ + struct xhci_container_ctx *in_ctx; + struct xhci_ep_ctx *ep_ctx; + u32 added_ctxs; + dma_addr_t addr; + + xhci_endpoint_copy(xhci, xhci->devs[slot_id]->in_ctx, + xhci->devs[slot_id]->out_ctx, ep_index); + in_ctx = xhci->devs[slot_id]->in_ctx; + ep_ctx = xhci_get_ep_ctx(xhci, in_ctx, ep_index); + addr = xhci_trb_virt_to_dma(deq_state->new_deq_seg, + deq_state->new_deq_ptr); + if (addr == 0) { + xhci_warn(xhci, "WARN Cannot submit config ep after " + "reset ep command\n"); + xhci_warn(xhci, "WARN deq seg = %p, deq ptr = %p\n", + deq_state->new_deq_seg, + deq_state->new_deq_ptr); + return; + } + ep_ctx->deq = addr | deq_state->new_cycle_state; + + added_ctxs = xhci_get_endpoint_flag_from_index(ep_index); + xhci_setup_input_ctx_for_config_ep(xhci, xhci->devs[slot_id]->in_ctx, + xhci->devs[slot_id]->out_ctx, added_ctxs, added_ctxs); +} + +void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci, + struct usb_device *udev, unsigned int ep_index) +{ + struct xhci_dequeue_state deq_state; + struct xhci_virt_ep *ep; + + xhci_dbg(xhci, "Cleaning up stalled endpoint ring\n"); + ep = &xhci->devs[udev->slot_id]->eps[ep_index]; + /* We need to move the HW's dequeue pointer past this TD, + * or it will attempt to resend it on the next doorbell ring. + */ + xhci_find_new_dequeue_state(xhci, udev->slot_id, + ep_index, ep->stopped_td, + &deq_state); + + /* HW with the reset endpoint quirk will use the saved dequeue state to + * issue a configure endpoint command later. + */ + if (!(xhci->quirks & XHCI_RESET_EP_QUIRK)) { + xhci_dbg(xhci, "Queueing new dequeue state\n"); + xhci_queue_new_dequeue_state(xhci, udev->slot_id, + ep_index, &deq_state); + } else { + /* Better hope no one uses the input context between now and the + * reset endpoint completion! + */ + xhci_dbg(xhci, "Setting up input context for " + "configure endpoint command\n"); + xhci_setup_input_ctx_for_quirk(xhci, udev->slot_id, + ep_index, &deq_state); + } +} + +/* Deal with stalled endpoints. The core should have sent the control message + * to clear the halt condition. However, we need to make the xHCI hardware + * reset its sequence number, since a device will expect a sequence number of + * zero after the halt condition is cleared. + * Context: in_interrupt + */ +void xhci_endpoint_reset(struct usb_hcd *hcd, + struct usb_host_endpoint *ep) +{ + struct xhci_hcd *xhci; + struct usb_device *udev; + unsigned int ep_index; + unsigned long flags; + int ret; + struct xhci_virt_ep *virt_ep; + + xhci = hcd_to_xhci(hcd); + udev = (struct usb_device *) ep->hcpriv; + /* Called with a root hub endpoint (or an endpoint that wasn't added + * with xhci_add_endpoint() + */ + if (!ep->hcpriv) + return; + ep_index = xhci_get_endpoint_index(&ep->desc); + virt_ep = &xhci->devs[udev->slot_id]->eps[ep_index]; + if (!virt_ep->stopped_td) { + xhci_dbg(xhci, "Endpoint 0x%x not halted, refusing to reset.\n", + ep->desc.bEndpointAddress); + return; + } + if (usb_endpoint_xfer_control(&ep->desc)) { + xhci_dbg(xhci, "Control endpoint stall already handled.\n"); + return; + } + + xhci_dbg(xhci, "Queueing reset endpoint command\n"); + spin_lock_irqsave(&xhci->lock, flags); + ret = xhci_queue_reset_ep(xhci, udev->slot_id, ep_index); + /* + * Can't change the ring dequeue pointer until it's transitioned to the + * stopped state, which is only upon a successful reset endpoint + * command. Better hope that last command worked! + */ + if (!ret) { + xhci_cleanup_stalled_ring(xhci, udev, ep_index); + kfree(virt_ep->stopped_td); + xhci_ring_cmd_db(xhci); + } + spin_unlock_irqrestore(&xhci->lock, flags); + + if (ret) + xhci_warn(xhci, "FIXME allocate a new ring segment\n"); +} + +/* + * This submits a Reset Device Command, which will set the device state to 0, + * set the device address to 0, and disable all the endpoints except the default + * control endpoint. The USB core should come back and call + * xhci_address_device(), and then re-set up the configuration. If this is + * called because of a usb_reset_and_verify_device(), then the old alternate + * settings will be re-installed through the normal bandwidth allocation + * functions. + * + * Wait for the Reset Device command to finish. Remove all structures + * associated with the endpoints that were disabled. Clear the input device + * structure? Cache the rings? Reset the control endpoint 0 max packet size? + */ +int xhci_reset_device(struct usb_hcd *hcd, struct usb_device *udev) +{ + int ret, i; + unsigned long flags; + struct xhci_hcd *xhci; + unsigned int slot_id; + struct xhci_virt_device *virt_dev; + struct xhci_command *reset_device_cmd; + int timeleft; + int last_freed_endpoint; + + ret = xhci_check_args(hcd, udev, NULL, 0, __func__); + if (ret <= 0) + return ret; + xhci = hcd_to_xhci(hcd); + slot_id = udev->slot_id; + virt_dev = xhci->devs[slot_id]; + if (!virt_dev) { + xhci_dbg(xhci, "%s called with invalid slot ID %u\n", + __func__, slot_id); + return -EINVAL; + } + + xhci_dbg(xhci, "Resetting device with slot ID %u\n", slot_id); + /* Allocate the command structure that holds the struct completion. + * Assume we're in process context, since the normal device reset + * process has to wait for the device anyway. Storage devices are + * reset as part of error handling, so use GFP_NOIO instead of + * GFP_KERNEL. + */ + reset_device_cmd = xhci_alloc_command(xhci, false, true, GFP_NOIO); + if (!reset_device_cmd) { + xhci_dbg(xhci, "Couldn't allocate command structure.\n"); + return -ENOMEM; + } + + /* Attempt to submit the Reset Device command to the command ring */ + spin_lock_irqsave(&xhci->lock, flags); + reset_device_cmd->command_trb = xhci->cmd_ring->enqueue; + list_add_tail(&reset_device_cmd->cmd_list, &virt_dev->cmd_list); + ret = xhci_queue_reset_device(xhci, slot_id); + if (ret) { + xhci_dbg(xhci, "FIXME: allocate a command ring segment\n"); + list_del(&reset_device_cmd->cmd_list); + spin_unlock_irqrestore(&xhci->lock, flags); + goto command_cleanup; + } + xhci_ring_cmd_db(xhci); + spin_unlock_irqrestore(&xhci->lock, flags); + + /* Wait for the Reset Device command to finish */ + timeleft = wait_for_completion_interruptible_timeout( + reset_device_cmd->completion, + USB_CTRL_SET_TIMEOUT); + if (timeleft <= 0) { + xhci_warn(xhci, "%s while waiting for reset device command\n", + timeleft == 0 ? "Timeout" : "Signal"); + spin_lock_irqsave(&xhci->lock, flags); + /* The timeout might have raced with the event ring handler, so + * only delete from the list if the item isn't poisoned. + */ + if (reset_device_cmd->cmd_list.next != LIST_POISON1) + list_del(&reset_device_cmd->cmd_list); + spin_unlock_irqrestore(&xhci->lock, flags); + ret = -ETIME; + goto command_cleanup; + } + + /* The Reset Device command can't fail, according to the 0.95/0.96 spec, + * unless we tried to reset a slot ID that wasn't enabled, + * or the device wasn't in the addressed or configured state. + */ + ret = reset_device_cmd->status; + switch (ret) { + case COMP_EBADSLT: /* 0.95 completion code for bad slot ID */ + case COMP_CTX_STATE: /* 0.96 completion code for same thing */ + xhci_info(xhci, "Can't reset device (slot ID %u) in %s state\n", + slot_id, + xhci_get_slot_state(xhci, virt_dev->out_ctx)); + xhci_info(xhci, "Not freeing device rings.\n"); + /* Don't treat this as an error. May change my mind later. */ + ret = 0; + goto command_cleanup; + case COMP_SUCCESS: + xhci_dbg(xhci, "Successful reset device command.\n"); + break; + default: + if (xhci_is_vendor_info_code(xhci, ret)) + break; + xhci_warn(xhci, "Unknown completion code %u for " + "reset device command.\n", ret); + ret = -EINVAL; + goto command_cleanup; + } + + /* Everything but endpoint 0 is disabled, so free or cache the rings. */ + last_freed_endpoint = 1; + for (i = 1; i < 31; ++i) { + if (!virt_dev->eps[i].ring) + continue; + xhci_free_or_cache_endpoint_ring(xhci, virt_dev, i); + last_freed_endpoint = i; + } + xhci_dbg(xhci, "Output context after successful reset device cmd:\n"); + xhci_dbg_ctx(xhci, virt_dev->out_ctx, last_freed_endpoint); + ret = 0; + +command_cleanup: + xhci_free_command(xhci, reset_device_cmd); + return ret; +} + +/* + * At this point, the struct usb_device is about to go away, the device has + * disconnected, and all traffic has been stopped and the endpoints have been + * disabled. Free any HC data structures associated with that device. + */ +void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev) +{ + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + struct xhci_virt_device *virt_dev; + unsigned long flags; + u32 state; + int i; + + if (udev->slot_id == 0) + return; + virt_dev = xhci->devs[udev->slot_id]; + if (!virt_dev) + return; + + /* Stop any wayward timer functions (which may grab the lock) */ + for (i = 0; i < 31; ++i) { + virt_dev->eps[i].ep_state &= ~EP_HALT_PENDING; + del_timer_sync(&virt_dev->eps[i].stop_cmd_timer); + } + + spin_lock_irqsave(&xhci->lock, flags); + /* Don't disable the slot if the host controller is dead. */ + state = xhci_readl(xhci, &xhci->op_regs->status); + if (state == 0xffffffff || (xhci->xhc_state & XHCI_STATE_DYING)) { + xhci_free_virt_device(xhci, udev->slot_id); + spin_unlock_irqrestore(&xhci->lock, flags); + return; + } + + if (xhci_queue_slot_control(xhci, TRB_DISABLE_SLOT, udev->slot_id)) { + spin_unlock_irqrestore(&xhci->lock, flags); + xhci_dbg(xhci, "FIXME: allocate a command ring segment\n"); + return; + } + xhci_ring_cmd_db(xhci); + spin_unlock_irqrestore(&xhci->lock, flags); + /* + * Event command completion handler will free any data structures + * associated with the slot. XXX Can free sleep? + */ +} + +/* + * Returns 0 if the xHC ran out of device slots, the Enable Slot command + * timed out, or allocating memory failed. Returns 1 on success. + */ +int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev) +{ + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + unsigned long flags; + int timeleft; + int ret; + + spin_lock_irqsave(&xhci->lock, flags); + ret = xhci_queue_slot_control(xhci, TRB_ENABLE_SLOT, 0); + if (ret) { + spin_unlock_irqrestore(&xhci->lock, flags); + xhci_dbg(xhci, "FIXME: allocate a command ring segment\n"); + return 0; + } + xhci_ring_cmd_db(xhci); + spin_unlock_irqrestore(&xhci->lock, flags); + + /* XXX: how much time for xHC slot assignment? */ + timeleft = wait_for_completion_interruptible_timeout(&xhci->addr_dev, + USB_CTRL_SET_TIMEOUT); + if (timeleft <= 0) { + xhci_warn(xhci, "%s while waiting for a slot\n", + timeleft == 0 ? "Timeout" : "Signal"); + /* FIXME cancel the enable slot request */ + return 0; + } + + if (!xhci->slot_id) { + xhci_err(xhci, "Error while assigning device slot ID\n"); + return 0; + } + /* xhci_alloc_virt_device() does not touch rings; no need to lock */ + if (!xhci_alloc_virt_device(xhci, xhci->slot_id, udev, GFP_KERNEL)) { + /* Disable slot, if we can do it without mem alloc */ + xhci_warn(xhci, "Could not allocate xHCI USB device data structures\n"); + spin_lock_irqsave(&xhci->lock, flags); + if (!xhci_queue_slot_control(xhci, TRB_DISABLE_SLOT, udev->slot_id)) + xhci_ring_cmd_db(xhci); + spin_unlock_irqrestore(&xhci->lock, flags); + return 0; + } + udev->slot_id = xhci->slot_id; + /* Is this a LS or FS device under a HS hub? */ + /* Hub or peripherial? */ + return 1; +} + +/* + * Issue an Address Device command (which will issue a SetAddress request to + * the device). + * We should be protected by the usb_address0_mutex in khubd's hub_port_init, so + * we should only issue and wait on one address command at the same time. + * + * We add one to the device address issued by the hardware because the USB core + * uses address 1 for the root hubs (even though they're not really devices). + */ +int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev) +{ + unsigned long flags; + int timeleft; + struct xhci_virt_device *virt_dev; + int ret = 0; + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + struct xhci_slot_ctx *slot_ctx; + struct xhci_input_control_ctx *ctrl_ctx; + u64 temp_64; + + if (!udev->slot_id) { + xhci_dbg(xhci, "Bad Slot ID %d\n", udev->slot_id); + return -EINVAL; + } + + virt_dev = xhci->devs[udev->slot_id]; + + /* If this is a Set Address to an unconfigured device, setup ep 0 */ + if (!udev->config) + xhci_setup_addressable_virt_dev(xhci, udev); + /* Otherwise, assume the core has the device configured how it wants */ + xhci_dbg(xhci, "Slot ID %d Input Context:\n", udev->slot_id); + xhci_dbg_ctx(xhci, virt_dev->in_ctx, 2); + + spin_lock_irqsave(&xhci->lock, flags); + ret = xhci_queue_address_device(xhci, virt_dev->in_ctx->dma, + udev->slot_id); + if (ret) { + spin_unlock_irqrestore(&xhci->lock, flags); + xhci_dbg(xhci, "FIXME: allocate a command ring segment\n"); + return ret; + } + xhci_ring_cmd_db(xhci); + spin_unlock_irqrestore(&xhci->lock, flags); + + /* ctrl tx can take up to 5 sec; XXX: need more time for xHC? */ + timeleft = wait_for_completion_interruptible_timeout(&xhci->addr_dev, + USB_CTRL_SET_TIMEOUT); + /* FIXME: From section 4.3.4: "Software shall be responsible for timing + * the SetAddress() "recovery interval" required by USB and aborting the + * command on a timeout. + */ + if (timeleft <= 0) { + xhci_warn(xhci, "%s while waiting for a slot\n", + timeleft == 0 ? "Timeout" : "Signal"); + /* FIXME cancel the address device command */ + return -ETIME; + } + + switch (virt_dev->cmd_status) { + case COMP_CTX_STATE: + case COMP_EBADSLT: + xhci_err(xhci, "Setup ERROR: address device command for slot %d.\n", + udev->slot_id); + ret = -EINVAL; + break; + case COMP_TX_ERR: + dev_warn(&udev->dev, "Device not responding to set address.\n"); + ret = -EPROTO; + break; + case COMP_SUCCESS: + xhci_dbg(xhci, "Successful Address Device command\n"); + break; + default: + xhci_err(xhci, "ERROR: unexpected command completion " + "code 0x%x.\n", virt_dev->cmd_status); + xhci_dbg(xhci, "Slot ID %d Output Context:\n", udev->slot_id); + xhci_dbg_ctx(xhci, virt_dev->out_ctx, 2); + ret = -EINVAL; + break; + } + if (ret) { + return ret; + } + temp_64 = xhci_read_64(xhci, &xhci->op_regs->dcbaa_ptr); + xhci_dbg(xhci, "Op regs DCBAA ptr = %#016llx\n", temp_64); + xhci_dbg(xhci, "Slot ID %d dcbaa entry @%p = %#016llx\n", + udev->slot_id, + &xhci->dcbaa->dev_context_ptrs[udev->slot_id], + (unsigned long long) + xhci->dcbaa->dev_context_ptrs[udev->slot_id]); + xhci_dbg(xhci, "Output Context DMA address = %#08llx\n", + (unsigned long long)virt_dev->out_ctx->dma); + xhci_dbg(xhci, "Slot ID %d Input Context:\n", udev->slot_id); + xhci_dbg_ctx(xhci, virt_dev->in_ctx, 2); + xhci_dbg(xhci, "Slot ID %d Output Context:\n", udev->slot_id); + xhci_dbg_ctx(xhci, virt_dev->out_ctx, 2); + /* + * USB core uses address 1 for the roothubs, so we add one to the + * address given back to us by the HC. + */ + slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->out_ctx); + udev->devnum = (slot_ctx->dev_state & DEV_ADDR_MASK) + 1; + /* Zero the input context control for later use */ + ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx); + ctrl_ctx->add_flags = 0; + ctrl_ctx->drop_flags = 0; + + xhci_dbg(xhci, "Device address = %d\n", udev->devnum); + /* XXX Meh, not sure if anyone else but choose_address uses this. */ + set_bit(udev->devnum, udev->bus->devmap.devicemap); + + return 0; +} + +/* Once a hub descriptor is fetched for a device, we need to update the xHC's + * internal data structures for the device. + */ +int xhci_update_hub_device(struct usb_hcd *hcd, struct usb_device *hdev, + struct usb_tt *tt, gfp_t mem_flags) +{ + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + struct xhci_virt_device *vdev; + struct xhci_command *config_cmd; + struct xhci_input_control_ctx *ctrl_ctx; + struct xhci_slot_ctx *slot_ctx; + unsigned long flags; + unsigned think_time; + int ret; + + /* Ignore root hubs */ + if (!hdev->parent) + return 0; + + vdev = xhci->devs[hdev->slot_id]; + if (!vdev) { + xhci_warn(xhci, "Cannot update hub desc for unknown device.\n"); + return -EINVAL; + } + config_cmd = xhci_alloc_command(xhci, true, true, mem_flags); + if (!config_cmd) { + xhci_dbg(xhci, "Could not allocate xHCI command structure.\n"); + return -ENOMEM; + } + + spin_lock_irqsave(&xhci->lock, flags); + xhci_slot_copy(xhci, config_cmd->in_ctx, vdev->out_ctx); + ctrl_ctx = xhci_get_input_control_ctx(xhci, config_cmd->in_ctx); + ctrl_ctx->add_flags |= SLOT_FLAG; + slot_ctx = xhci_get_slot_ctx(xhci, config_cmd->in_ctx); + slot_ctx->dev_info |= DEV_HUB; + if (tt->multi) + slot_ctx->dev_info |= DEV_MTT; + if (xhci->hci_version > 0x95) { + xhci_dbg(xhci, "xHCI version %x needs hub " + "TT think time and number of ports\n", + (unsigned int) xhci->hci_version); + slot_ctx->dev_info2 |= XHCI_MAX_PORTS(hdev->maxchild); + /* Set TT think time - convert from ns to FS bit times. + * 0 = 8 FS bit times, 1 = 16 FS bit times, + * 2 = 24 FS bit times, 3 = 32 FS bit times. + */ + think_time = tt->think_time; + if (think_time != 0) + think_time = (think_time / 666) - 1; + slot_ctx->tt_info |= TT_THINK_TIME(think_time); + } else { + xhci_dbg(xhci, "xHCI version %x doesn't need hub " + "TT think time or number of ports\n", + (unsigned int) xhci->hci_version); + } + slot_ctx->dev_state = 0; + spin_unlock_irqrestore(&xhci->lock, flags); + + xhci_dbg(xhci, "Set up %s for hub device.\n", + (xhci->hci_version > 0x95) ? + "configure endpoint" : "evaluate context"); + xhci_dbg(xhci, "Slot %u Input Context:\n", hdev->slot_id); + xhci_dbg_ctx(xhci, config_cmd->in_ctx, 0); + + /* Issue and wait for the configure endpoint or + * evaluate context command. + */ + if (xhci->hci_version > 0x95) + ret = xhci_configure_endpoint(xhci, hdev, config_cmd, + false, false); + else + ret = xhci_configure_endpoint(xhci, hdev, config_cmd, + true, false); + + xhci_dbg(xhci, "Slot %u Output Context:\n", hdev->slot_id); + xhci_dbg_ctx(xhci, vdev->out_ctx, 0); + + xhci_free_command(xhci, config_cmd); + return ret; +} + +int xhci_get_frame(struct usb_hcd *hcd) +{ + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + /* EHCI mods by the periodic size. Why? */ + return xhci_readl(xhci, &xhci->run_regs->microframe_index) >> 3; +} + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_LICENSE("GPL"); + +static int __init xhci_hcd_init(void) +{ +#ifdef CONFIG_PCI + int retval = 0; + + retval = xhci_register_pci(); + + if (retval < 0) { + printk(KERN_DEBUG "Problem registering PCI driver."); + return retval; + } +#endif + /* + * Check the compiler generated sizes of structures that must be laid + * out in specific ways for hardware access. + */ + BUILD_BUG_ON(sizeof(struct xhci_doorbell_array) != 256*32/8); + BUILD_BUG_ON(sizeof(struct xhci_slot_ctx) != 8*32/8); + BUILD_BUG_ON(sizeof(struct xhci_ep_ctx) != 8*32/8); + /* xhci_device_control has eight fields, and also + * embeds one xhci_slot_ctx and 31 xhci_ep_ctx + */ + BUILD_BUG_ON(sizeof(struct xhci_stream_ctx) != 4*32/8); + BUILD_BUG_ON(sizeof(union xhci_trb) != 4*32/8); + BUILD_BUG_ON(sizeof(struct xhci_erst_entry) != 4*32/8); + BUILD_BUG_ON(sizeof(struct xhci_cap_regs) != 7*32/8); + BUILD_BUG_ON(sizeof(struct xhci_intr_reg) != 8*32/8); + /* xhci_run_regs has eight fields and embeds 128 xhci_intr_regs */ + BUILD_BUG_ON(sizeof(struct xhci_run_regs) != (8+8*128)*32/8); + BUILD_BUG_ON(sizeof(struct xhci_doorbell_array) != 256*32/8); + return 0; +} +module_init(xhci_hcd_init); + +static void __exit xhci_hcd_cleanup(void) +{ +#ifdef CONFIG_PCI + xhci_unregister_pci(); +#endif +} +module_exit(xhci_hcd_cleanup); |