summaryrefslogtreecommitdiffstats
path: root/drivers/usb/host/xhci.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/host/xhci.c')
-rw-r--r--drivers/usb/host/xhci.c210
1 files changed, 210 insertions, 0 deletions
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 3d2af688157..33d0034d8a6 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -551,6 +551,216 @@ void xhci_shutdown(struct usb_hcd *hcd)
xhci_readl(xhci, &xhci->op_regs->status));
}
+static void xhci_save_registers(struct xhci_hcd *xhci)
+{
+ xhci->s3.command = xhci_readl(xhci, &xhci->op_regs->command);
+ xhci->s3.dev_nt = xhci_readl(xhci, &xhci->op_regs->dev_notification);
+ xhci->s3.dcbaa_ptr = xhci_read_64(xhci, &xhci->op_regs->dcbaa_ptr);
+ xhci->s3.config_reg = xhci_readl(xhci, &xhci->op_regs->config_reg);
+ xhci->s3.irq_pending = xhci_readl(xhci, &xhci->ir_set->irq_pending);
+ xhci->s3.irq_control = xhci_readl(xhci, &xhci->ir_set->irq_control);
+ xhci->s3.erst_size = xhci_readl(xhci, &xhci->ir_set->erst_size);
+ xhci->s3.erst_base = xhci_read_64(xhci, &xhci->ir_set->erst_base);
+ xhci->s3.erst_dequeue = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
+}
+
+static void xhci_restore_registers(struct xhci_hcd *xhci)
+{
+ xhci_writel(xhci, xhci->s3.command, &xhci->op_regs->command);
+ xhci_writel(xhci, xhci->s3.dev_nt, &xhci->op_regs->dev_notification);
+ xhci_write_64(xhci, xhci->s3.dcbaa_ptr, &xhci->op_regs->dcbaa_ptr);
+ xhci_writel(xhci, xhci->s3.config_reg, &xhci->op_regs->config_reg);
+ xhci_writel(xhci, xhci->s3.irq_pending, &xhci->ir_set->irq_pending);
+ xhci_writel(xhci, xhci->s3.irq_control, &xhci->ir_set->irq_control);
+ xhci_writel(xhci, xhci->s3.erst_size, &xhci->ir_set->erst_size);
+ xhci_write_64(xhci, xhci->s3.erst_base, &xhci->ir_set->erst_base);
+}
+
+/*
+ * Stop HC (not bus-specific)
+ *
+ * This is called when the machine transition into S3/S4 mode.
+ *
+ */
+int xhci_suspend(struct xhci_hcd *xhci)
+{
+ int rc = 0;
+ struct usb_hcd *hcd = xhci_to_hcd(xhci);
+ u32 command;
+
+ spin_lock_irq(&xhci->lock);
+ clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+ /* step 1: stop endpoint */
+ /* skipped assuming that port suspend has done */
+
+ /* step 2: clear Run/Stop bit */
+ command = xhci_readl(xhci, &xhci->op_regs->command);
+ command &= ~CMD_RUN;
+ xhci_writel(xhci, command, &xhci->op_regs->command);
+ if (handshake(xhci, &xhci->op_regs->status,
+ STS_HALT, STS_HALT, 100*100)) {
+ xhci_warn(xhci, "WARN: xHC CMD_RUN timeout\n");
+ spin_unlock_irq(&xhci->lock);
+ return -ETIMEDOUT;
+ }
+
+ /* step 3: save registers */
+ xhci_save_registers(xhci);
+
+ /* step 4: set CSS flag */
+ command = xhci_readl(xhci, &xhci->op_regs->command);
+ command |= CMD_CSS;
+ xhci_writel(xhci, command, &xhci->op_regs->command);
+ if (handshake(xhci, &xhci->op_regs->status, STS_SAVE, 0, 10*100)) {
+ xhci_warn(xhci, "WARN: xHC CMD_CSS timeout\n");
+ spin_unlock_irq(&xhci->lock);
+ return -ETIMEDOUT;
+ }
+ /* step 5: remove core well power */
+ xhci_cleanup_msix(xhci);
+ spin_unlock_irq(&xhci->lock);
+
+ return rc;
+}
+
+/*
+ * start xHC (not bus-specific)
+ *
+ * This is called when the machine transition from S3/S4 mode.
+ *
+ */
+int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
+{
+ u32 command, temp = 0;
+ struct usb_hcd *hcd = xhci_to_hcd(xhci);
+ struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
+ u64 val_64;
+ int old_state, retval;
+
+ old_state = hcd->state;
+ if (time_before(jiffies, xhci->next_statechange))
+ msleep(100);
+
+ spin_lock_irq(&xhci->lock);
+
+ if (!hibernated) {
+ /* step 1: restore register */
+ xhci_restore_registers(xhci);
+ /* step 2: initialize command ring buffer */
+ val_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
+ val_64 = (val_64 & (u64) CMD_RING_RSVD_BITS) |
+ (xhci_trb_virt_to_dma(xhci->cmd_ring->deq_seg,
+ xhci->cmd_ring->dequeue) &
+ (u64) ~CMD_RING_RSVD_BITS) |
+ xhci->cmd_ring->cycle_state;
+ xhci_dbg(xhci, "// Setting command ring address to 0x%llx\n",
+ (long unsigned long) val_64);
+ xhci_write_64(xhci, val_64, &xhci->op_regs->cmd_ring);
+ /* step 3: restore state and start state*/
+ /* step 3: set CRS flag */
+ command = xhci_readl(xhci, &xhci->op_regs->command);
+ command |= CMD_CRS;
+ xhci_writel(xhci, command, &xhci->op_regs->command);
+ if (handshake(xhci, &xhci->op_regs->status,
+ STS_RESTORE, 0, 10*100)) {
+ xhci_dbg(xhci, "WARN: xHC CMD_CSS timeout\n");
+ spin_unlock_irq(&xhci->lock);
+ return -ETIMEDOUT;
+ }
+ temp = xhci_readl(xhci, &xhci->op_regs->status);
+ }
+
+ /* If restore operation fails, re-initialize the HC during resume */
+ if ((temp & STS_SRE) || hibernated) {
+ usb_root_hub_lost_power(hcd->self.root_hub);
+
+ xhci_dbg(xhci, "Stop HCD\n");
+ xhci_halt(xhci);
+ xhci_reset(xhci);
+ if (hibernated)
+ xhci_cleanup_msix(xhci);
+ spin_unlock_irq(&xhci->lock);
+
+#ifdef CONFIG_USB_XHCI_HCD_DEBUGGING
+ /* Tell the event ring poll function not to reschedule */
+ xhci->zombie = 1;
+ del_timer_sync(&xhci->event_ring_timer);
+#endif
+
+ xhci_dbg(xhci, "// Disabling event ring interrupts\n");
+ temp = xhci_readl(xhci, &xhci->op_regs->status);
+ xhci_writel(xhci, temp & ~STS_EINT, &xhci->op_regs->status);
+ temp = xhci_readl(xhci, &xhci->ir_set->irq_pending);
+ xhci_writel(xhci, ER_IRQ_DISABLE(temp),
+ &xhci->ir_set->irq_pending);
+ xhci_print_ir_set(xhci, xhci->ir_set, 0);
+
+ xhci_dbg(xhci, "cleaning up memory\n");
+ xhci_mem_cleanup(xhci);
+ xhci_dbg(xhci, "xhci_stop completed - status = %x\n",
+ xhci_readl(xhci, &xhci->op_regs->status));
+
+ xhci_dbg(xhci, "Initialize the HCD\n");
+ retval = xhci_init(hcd);
+ if (retval)
+ return retval;
+
+ xhci_dbg(xhci, "Start the HCD\n");
+ retval = xhci_run(hcd);
+ if (!retval)
+ set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+ hcd->state = HC_STATE_SUSPENDED;
+ return retval;
+ }
+
+ /* Re-setup MSI-X */
+ if (hcd->irq)
+ free_irq(hcd->irq, hcd);
+ hcd->irq = -1;
+
+ retval = xhci_setup_msix(xhci);
+ if (retval)
+ /* fall back to msi*/
+ retval = xhci_setup_msi(xhci);
+
+ if (retval) {
+ /* fall back to legacy interrupt*/
+ retval = request_irq(pdev->irq, &usb_hcd_irq, IRQF_SHARED,
+ hcd->irq_descr, hcd);
+ if (retval) {
+ xhci_err(xhci, "request interrupt %d failed\n",
+ pdev->irq);
+ return retval;
+ }
+ hcd->irq = pdev->irq;
+ }
+
+ /* step 4: set Run/Stop bit */
+ command = xhci_readl(xhci, &xhci->op_regs->command);
+ command |= CMD_RUN;
+ xhci_writel(xhci, command, &xhci->op_regs->command);
+ handshake(xhci, &xhci->op_regs->status, STS_HALT,
+ 0, 250 * 1000);
+
+ /* step 5: walk topology and initialize portsc,
+ * portpmsc and portli
+ */
+ /* this is done in bus_resume */
+
+ /* step 6: restart each of the previously
+ * Running endpoints by ringing their doorbells
+ */
+
+ set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+ if (!hibernated)
+ hcd->state = old_state;
+ else
+ hcd->state = HC_STATE_SUSPENDED;
+
+ spin_unlock_irq(&xhci->lock);
+ return 0;
+}
+
/*-------------------------------------------------------------------------*/
/**