diff options
Diffstat (limited to 'drivers/usb/host/xhci.c')
| -rw-r--r-- | drivers/usb/host/xhci.c | 59 |
1 files changed, 48 insertions, 11 deletions
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index f1f01a834ba..d8f640b12dd 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -350,7 +350,7 @@ static int xhci_try_enable_msi(struct usb_hcd *hcd) * generate interrupts. Don't even try to enable MSI. */ if (xhci->quirks & XHCI_BROKEN_MSI) - return 0; + goto legacy_irq; /* unregister the legacy interrupt */ if (hcd->irq) @@ -371,6 +371,7 @@ static int xhci_try_enable_msi(struct usb_hcd *hcd) return -EINVAL; } + legacy_irq: /* fall back to legacy interrupt*/ ret = request_irq(pdev->irq, &usb_hcd_irq, IRQF_SHARED, hcd->irq_descr, hcd); @@ -416,9 +417,9 @@ static void compliance_mode_recovery(unsigned long arg) * Compliance Mode Detected. Letting USB Core * handle the Warm Reset */ - xhci_dbg(xhci, "Compliance Mode Detected->Port %d!\n", + xhci_dbg(xhci, "Compliance mode detected->port %d\n", i + 1); - xhci_dbg(xhci, "Attempting Recovery routine!\n"); + xhci_dbg(xhci, "Attempting compliance mode recovery\n"); hcd = xhci->shared_hcd; if (hcd->state == HC_STATE_SUSPENDED) @@ -456,7 +457,7 @@ static void compliance_mode_recovery_timer_init(struct xhci_hcd *xhci) set_timer_slack(&xhci->comp_mode_recovery_timer, msecs_to_jiffies(COMP_MODE_RCVRY_MSECS)); add_timer(&xhci->comp_mode_recovery_timer); - xhci_dbg(xhci, "Compliance Mode Recovery Timer Initialized.\n"); + xhci_dbg(xhci, "Compliance mode recovery timer initialized\n"); } /* @@ -465,7 +466,7 @@ static void compliance_mode_recovery_timer_init(struct xhci_hcd *xhci) * Systems: * Vendor: Hewlett-Packard -> System Models: Z420, Z620 and Z820 */ -static bool compliance_mode_recovery_timer_quirk_check(void) +bool xhci_compliance_mode_recovery_timer_quirk_check(void) { const char *dmi_product_name, *dmi_sys_vendor; @@ -516,7 +517,7 @@ int xhci_init(struct usb_hcd *hcd) xhci_dbg(xhci, "Finished xhci_init\n"); /* Initializing Compliance Mode Recovery Data If Needed */ - if (compliance_mode_recovery_timer_quirk_check()) { + if (xhci_compliance_mode_recovery_timer_quirk_check()) { xhci->quirks |= XHCI_COMP_MODE_QUIRK; compliance_mode_recovery_timer_init(xhci); } @@ -732,8 +733,11 @@ void xhci_stop(struct usb_hcd *hcd) /* Deleting Compliance Mode Recovery Timer */ if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) && - (!(xhci_all_ports_seen_u0(xhci)))) + (!(xhci_all_ports_seen_u0(xhci)))) { del_timer_sync(&xhci->comp_mode_recovery_timer); + xhci_dbg(xhci, "%s: compliance mode recovery timer deleted\n", + __func__); + } if (xhci->quirks & XHCI_AMD_PLL_FIX) usb_amd_dev_put(); @@ -929,7 +933,8 @@ int xhci_suspend(struct xhci_hcd *xhci) if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) && (!(xhci_all_ports_seen_u0(xhci)))) { del_timer_sync(&xhci->comp_mode_recovery_timer); - xhci_dbg(xhci, "Compliance Mode Recovery Timer Deleted!\n"); + xhci_dbg(xhci, "%s: compliance mode recovery timer deleted\n", + __func__); } /* step 5: remove core well power */ @@ -951,6 +956,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) struct usb_hcd *hcd = xhci_to_hcd(xhci); struct usb_hcd *secondary_hcd; int retval = 0; + bool comp_timer_running = false; /* Wait a bit if either of the roothubs need to settle from the * transition into bus suspend. @@ -988,6 +994,13 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) /* If restore operation fails, re-initialize the HC during resume */ if ((temp & STS_SRE) || hibernated) { + + if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) && + !(xhci_all_ports_seen_u0(xhci))) { + del_timer_sync(&xhci->comp_mode_recovery_timer); + xhci_dbg(xhci, "Compliance Mode Recovery Timer deleted!\n"); + } + /* Let the USB core know _both_ roothubs lost power. */ usb_root_hub_lost_power(xhci->main_hcd->self.root_hub); usb_root_hub_lost_power(xhci->shared_hcd->self.root_hub); @@ -1030,6 +1043,8 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) retval = xhci_init(hcd->primary_hcd); if (retval) return retval; + comp_timer_running = true; + xhci_dbg(xhci, "Start the primary HCD\n"); retval = xhci_run(hcd->primary_hcd); if (!retval) { @@ -1071,7 +1086,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) * to suffer the Compliance Mode issue again. It doesn't matter if * ports have entered previously to U0 before system's suspension. */ - if (xhci->quirks & XHCI_COMP_MODE_QUIRK) + if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) && !comp_timer_running) compliance_mode_recovery_timer_init(xhci); /* Re-enable port polling. */ @@ -3778,7 +3793,29 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev) return 0; } -#ifdef CONFIG_USB_SUSPEND +/* + * Transfer the port index into real index in the HW port status + * registers. Caculate offset between the port's PORTSC register + * and port status base. Divide the number of per port register + * to get the real index. The raw port number bases 1. + */ +int xhci_find_raw_port_number(struct usb_hcd *hcd, int port1) +{ + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + __le32 __iomem *base_addr = &xhci->op_regs->port_status_base; + __le32 __iomem *addr; + int raw_port; + + if (hcd->speed != HCD_USB3) + addr = xhci->usb2_ports[port1 - 1]; + else + addr = xhci->usb3_ports[port1 - 1]; + + raw_port = (addr - base_addr)/NUM_PORT_REGS + 1; + return raw_port; +} + +#ifdef CONFIG_PM_RUNTIME /* BESL to HIRD Encoding array for USB2 LPM */ static int xhci_besl_encoding[16] = {125, 150, 200, 300, 400, 500, 1000, 2000, @@ -4028,7 +4065,7 @@ int xhci_update_device(struct usb_hcd *hcd, struct usb_device *udev) return 0; } -#endif /* CONFIG_USB_SUSPEND */ +#endif /* CONFIG_PM_RUNTIME */ /*---------------------- USB 3.0 Link PM functions ------------------------*/ |