1 files changed, 91 insertions, 33 deletions

diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index c020b094fe7..2a5d45b4cb1 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -491,7 +491,7 @@ static void compliance_mode_recovery_timer_init(struct xhci_hcd *xhci)
  * Systems:
  * Vendor: Hewlett-Packard -> System Models: Z420, Z620 and Z820
  */
-bool xhci_compliance_mode_recovery_timer_quirk_check(void)
+static bool xhci_compliance_mode_recovery_timer_quirk_check(void)
 {
 	const char *dmi_product_name, *dmi_sys_vendor;
 
@@ -653,6 +653,7 @@ int xhci_run(struct usb_hcd *hcd)
 			"Finished xhci_run for USB2 roothub");
 	return 0;
 }
+EXPORT_SYMBOL_GPL(xhci_run);
 
 static void xhci_only_stop_hcd(struct usb_hcd *hcd)
 {
@@ -871,6 +872,8 @@ int xhci_suspend(struct xhci_hcd *xhci)
 	xhci_dbg(xhci, "%s: stopping port polling.\n", __func__);
 	clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
 	del_timer_sync(&hcd->rh_timer);
+	clear_bit(HCD_FLAG_POLL_RH, &xhci->shared_hcd->flags);
+	del_timer_sync(&xhci->shared_hcd->rh_timer);
 
 	spin_lock_irq(&xhci->lock);
 	clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
@@ -927,6 +930,7 @@ int xhci_suspend(struct xhci_hcd *xhci)
 
 	return rc;
 }
+EXPORT_SYMBOL_GPL(xhci_suspend);
 
 /*
  * start xHC (not bus-specific)
@@ -1075,9 +1079,12 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 	xhci_dbg(xhci, "%s: starting port polling.\n", __func__);
 	set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
 	usb_hcd_poll_rh_status(hcd);
+	set_bit(HCD_FLAG_POLL_RH, &xhci->shared_hcd->flags);
+	usb_hcd_poll_rh_status(xhci->shared_hcd);
 
 	return retval;
 }
+EXPORT_SYMBOL_GPL(xhci_resume);
 #endif	/* CONFIG_PM */
 
 /*-------------------------------------------------------------------------*/
@@ -2887,14 +2894,9 @@ void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci,
 	 * issue a configure endpoint command later.
 	 */
 	if (!(xhci->quirks & XHCI_RESET_EP_QUIRK)) {
-		struct xhci_command *command;
-		/* Can't sleep if we're called from cleanup_halted_endpoint() */
-		command = xhci_alloc_command(xhci, false, false, GFP_ATOMIC);
-		if (!command)
-			return;
 		xhci_dbg_trace(xhci, trace_xhci_dbg_reset_ep,
 				"Queueing new dequeue state");
-		xhci_queue_new_dequeue_state(xhci, command, udev->slot_id,
+		xhci_queue_new_dequeue_state(xhci, udev->slot_id,
 				ep_index, ep->stopped_stream, &deq_state);
 	} else {
 		/* Better hope no one uses the input context between now and the
@@ -3761,8 +3763,8 @@ disable_slot:
 /*
  * Issue an Address Device command and optionally send a corresponding
  * SetAddress request to the device.
- * We should be protected by the usb_address0_mutex in khubd's hub_port_init, so
- * we should only issue and wait on one address command at the same time.
+ * We should be protected by the usb_address0_mutex in hub_wq's hub_port_init,
+ * so we should only issue and wait on one address command at the same time.
  */
 static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev,
 			     enum xhci_setup_dev setup)
@@ -3971,13 +3973,21 @@ static int __maybe_unused xhci_change_max_exit_latency(struct xhci_hcd *xhci,
 	int ret;
 
 	spin_lock_irqsave(&xhci->lock, flags);
-	if (max_exit_latency == xhci->devs[udev->slot_id]->current_mel) {
+
+	virt_dev = xhci->devs[udev->slot_id];
+
+	/*
+	 * virt_dev might not exists yet if xHC resumed from hibernate (S4) and
+	 * xHC was re-initialized. Exit latency will be set later after
+	 * hub_port_finish_reset() is done and xhci->devs[] are re-allocated
+	 */
+
+	if (!virt_dev || max_exit_latency == virt_dev->current_mel) {
 		spin_unlock_irqrestore(&xhci->lock, flags);
 		return 0;
 	}
 
 	/* Attempt to issue an Evaluate Context command to change the MEL. */
-	virt_dev = xhci->devs[udev->slot_id];
 	command = xhci->lpm_command;
 	ctrl_ctx = xhci_get_input_control_ctx(xhci, command->in_ctx);
 	if (!ctrl_ctx) {
@@ -4895,6 +4905,76 @@ error:
 	kfree(xhci);
 	return retval;
 }
+EXPORT_SYMBOL_GPL(xhci_gen_setup);
+
+static const struct hc_driver xhci_hc_driver = {
+	.description =		"xhci-hcd",
+	.product_desc =		"xHCI Host Controller",
+	.hcd_priv_size =	sizeof(struct xhci_hcd *),
+
+	/*
+	 * generic hardware linkage
+	 */
+	.irq =			xhci_irq,
+	.flags =		HCD_MEMORY | HCD_USB3 | HCD_SHARED,
+
+	/*
+	 * basic lifecycle operations
+	 */
+	.reset =		NULL, /* set in xhci_init_driver() */
+	.start =		xhci_run,
+	.stop =			xhci_stop,
+	.shutdown =		xhci_shutdown,
+
+	/*
+	 * managing i/o requests and associated device resources
+	 */
+	.urb_enqueue =		xhci_urb_enqueue,
+	.urb_dequeue =		xhci_urb_dequeue,
+	.alloc_dev =		xhci_alloc_dev,
+	.free_dev =		xhci_free_dev,
+	.alloc_streams =	xhci_alloc_streams,
+	.free_streams =		xhci_free_streams,
+	.add_endpoint =		xhci_add_endpoint,
+	.drop_endpoint =	xhci_drop_endpoint,
+	.endpoint_reset =	xhci_endpoint_reset,
+	.check_bandwidth =	xhci_check_bandwidth,
+	.reset_bandwidth =	xhci_reset_bandwidth,
+	.address_device =	xhci_address_device,
+	.enable_device =	xhci_enable_device,
+	.update_hub_device =	xhci_update_hub_device,
+	.reset_device =		xhci_discover_or_reset_device,
+
+	/*
+	 * scheduling support
+	 */
+	.get_frame_number =	xhci_get_frame,
+
+	/*
+	 * root hub support
+	 */
+	.hub_control =		xhci_hub_control,
+	.hub_status_data =	xhci_hub_status_data,
+	.bus_suspend =		xhci_bus_suspend,
+	.bus_resume =		xhci_bus_resume,
+
+	/*
+	 * call back when device connected and addressed
+	 */
+	.update_device =        xhci_update_device,
+	.set_usb2_hw_lpm =	xhci_set_usb2_hardware_lpm,
+	.enable_usb3_lpm_timeout =	xhci_enable_usb3_lpm_timeout,
+	.disable_usb3_lpm_timeout =	xhci_disable_usb3_lpm_timeout,
+	.find_raw_port_number =	xhci_find_raw_port_number,
+};
+
+void xhci_init_driver(struct hc_driver *drv, int (*setup_fn)(struct usb_hcd *))
+{
+	BUG_ON(!setup_fn);
+	*drv = xhci_hc_driver;
+	drv->reset = setup_fn;
+}
+EXPORT_SYMBOL_GPL(xhci_init_driver);
 
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_AUTHOR(DRIVER_AUTHOR);
@@ -4902,18 +4982,6 @@ MODULE_LICENSE("GPL");
 
 static int __init xhci_hcd_init(void)
 {
-	int retval;
-
-	retval = xhci_register_pci();
-	if (retval < 0) {
-		pr_debug("Problem registering PCI driver.\n");
-		return retval;
-	}
-	retval = xhci_register_plat();
-	if (retval < 0) {
-		pr_debug("Problem registering platform driver.\n");
-		goto unreg_pci;
-	}
 	/*
 	 * Check the compiler generated sizes of structures that must be laid
 	 * out in specific ways for hardware access.
@@ -4932,15 +5000,5 @@ static int __init xhci_hcd_init(void)
 	/* xhci_run_regs has eight fields and embeds 128 xhci_intr_regs */
 	BUILD_BUG_ON(sizeof(struct xhci_run_regs) != (8+8*128)*32/8);
 	return 0;
-unreg_pci:
-	xhci_unregister_pci();
-	return retval;
 }
 module_init(xhci_hcd_init);
-
-static void __exit xhci_hcd_cleanup(void)
-{
-	xhci_unregister_pci();
-	xhci_unregister_plat();
-}
-module_exit(xhci_hcd_cleanup);