diff options
Diffstat (limited to 'drivers/usb/host')
61 files changed, 2313 insertions, 900 deletions
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index f788eb86707..83e58df29fe 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -65,7 +65,7 @@ config USB_EHCI_HCD config USB_EHCI_ROOT_HUB_TT bool "Root Hub Transaction Translators" - depends on USB_EHCI_HCD + depends on USB_EHCI_HCD || USB_CHIPIDEA_HOST ---help--- Some EHCI chips have vendor-specific extensions to integrate transaction translators, so that no OHCI or UHCI companion @@ -77,7 +77,7 @@ config USB_EHCI_ROOT_HUB_TT config USB_EHCI_TT_NEWSCHED bool "Improved Transaction Translator scheduling" - depends on USB_EHCI_HCD + depends on USB_EHCI_HCD || USB_CHIPIDEA_HOST default y ---help--- This changes the periodic scheduling code to fill more of the low @@ -110,13 +110,14 @@ config USB_EHCI_BIG_ENDIAN_MMIO depends on USB_EHCI_HCD && (PPC_CELLEB || PPC_PS3 || 440EPX || \ ARCH_IXP4XX || XPS_USB_HCD_XILINX || \ PPC_MPC512x || CPU_CAVIUM_OCTEON || \ - PMC_MSP || SPARC_LEON) + PMC_MSP || SPARC_LEON || MIPS_SEAD3) default y config USB_EHCI_BIG_ENDIAN_DESC bool depends on USB_EHCI_HCD && (440EPX || ARCH_IXP4XX || XPS_USB_HCD_XILINX || \ - PPC_MPC512x || PMC_MSP || SPARC_LEON) + PPC_MPC512x || PMC_MSP || SPARC_LEON || \ + MIPS_SEAD3) default y config XPS_USB_HCD_XILINX @@ -152,7 +153,7 @@ config USB_EHCI_HCD_OMAP bool "EHCI support for OMAP3 and later chips" depends on USB_EHCI_HCD && ARCH_OMAP default y - --- help --- + ---help--- Enables support for the on-chip EHCI controller on OMAP3 and later chips. @@ -291,6 +292,7 @@ config USB_OHCI_HCD depends on USB && USB_ARCH_HAS_OHCI select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3 select USB_OTG_UTILS if ARCH_OMAP + select USB_ISP1301 if ARCH_LPC32XX || ARCH_PNX4008 ---help--- The Open Host Controller Interface (OHCI) is a standard for accessing USB 1.1 host controller hardware. It does more in hardware than Intel's @@ -373,10 +375,15 @@ config USB_OHCI_HCD_PCI If unsure, say Y. config USB_OHCI_HCD_SSB - bool "OHCI support for Broadcom SSB OHCI core" + bool "OHCI support for Broadcom SSB OHCI core (DEPRECATED)" depends on USB_OHCI_HCD && (SSB = y || SSB = USB_OHCI_HCD) && EXPERIMENTAL + select USB_HCD_SSB + select USB_OHCI_HCD_PLATFORM default n ---help--- + This option is deprecated now and the driver was removed, use + USB_HCD_SSB and USB_OHCI_HCD_PLATFORM instead. + Support for the Sonics Silicon Backplane (SSB) attached Broadcom USB OHCI core. @@ -638,3 +645,27 @@ config USB_OCTEON_OHCI config USB_OCTEON2_COMMON bool default y if USB_OCTEON_EHCI || USB_OCTEON_OHCI + +config USB_HCD_BCMA + tristate "BCMA usb host driver" + depends on BCMA && EXPERIMENTAL + select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD + select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD + help + Enbale support for the EHCI and OCHI host controller on an bcma bus. + It converts the bcma driver into two platform device drivers + for ehci and ohci. + + If unsure, say N. + +config USB_HCD_SSB + tristate "SSB usb host driver" + depends on SSB && EXPERIMENTAL + select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD + select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD + help + Enbale support for the EHCI and OCHI host controller on an bcma bus. + It converts the bcma driver into two platform device drivers + for ehci and ohci. + + If unsure, say N. diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index 0982bcc140b..9e0a89ced15 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -41,3 +41,5 @@ obj-$(CONFIG_USB_IMX21_HCD) += imx21-hcd.o obj-$(CONFIG_USB_FSL_MPH_DR_OF) += fsl-mph-dr-of.o obj-$(CONFIG_USB_OCTEON2_COMMON) += octeon2-common.o obj-$(CONFIG_MIPS_ALCHEMY) += alchemy-common.o +obj-$(CONFIG_USB_HCD_BCMA) += bcma-hcd.o +obj-$(CONFIG_USB_HCD_SSB) += ssb-hcd.o diff --git a/drivers/usb/host/bcma-hcd.c b/drivers/usb/host/bcma-hcd.c new file mode 100644 index 00000000000..443da21d73c --- /dev/null +++ b/drivers/usb/host/bcma-hcd.c @@ -0,0 +1,335 @@ +/* + * Broadcom specific Advanced Microcontroller Bus + * Broadcom USB-core driver (BCMA bus glue) + * + * Copyright 2011-2012 Hauke Mehrtens <hauke@hauke-m.de> + * + * Based on ssb-ohci driver + * Copyright 2007 Michael Buesch <m@bues.ch> + * + * Derived from the OHCI-PCI driver + * Copyright 1999 Roman Weissgaerber + * Copyright 2000-2002 David Brownell + * Copyright 1999 Linus Torvalds + * Copyright 1999 Gregory P. Smith + * + * Derived from the USBcore related parts of Broadcom-SB + * Copyright 2005-2011 Broadcom Corporation + * + * Licensed under the GNU/GPL. See COPYING for details. + */ +#include <linux/bcma/bcma.h> +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/usb/ehci_pdriver.h> +#include <linux/usb/ohci_pdriver.h> + +MODULE_AUTHOR("Hauke Mehrtens"); +MODULE_DESCRIPTION("Common USB driver for BCMA Bus"); +MODULE_LICENSE("GPL"); + +struct bcma_hcd_device { + struct platform_device *ehci_dev; + struct platform_device *ohci_dev; +}; + +/* Wait for bitmask in a register to get set or cleared. + * timeout is in units of ten-microseconds. + */ +static int bcma_wait_bits(struct bcma_device *dev, u16 reg, u32 bitmask, + int timeout) +{ + int i; + u32 val; + + for (i = 0; i < timeout; i++) { + val = bcma_read32(dev, reg); + if ((val & bitmask) == bitmask) + return 0; + udelay(10); + } + + return -ETIMEDOUT; +} + +static void __devinit bcma_hcd_4716wa(struct bcma_device *dev) +{ +#ifdef CONFIG_BCMA_DRIVER_MIPS + /* Work around for 4716 failures. */ + if (dev->bus->chipinfo.id == 0x4716) { + u32 tmp; + + tmp = bcma_cpu_clock(&dev->bus->drv_mips); + if (tmp >= 480000000) + tmp = 0x1846b; /* set CDR to 0x11(fast) */ + else if (tmp == 453000000) + tmp = 0x1046b; /* set CDR to 0x10(slow) */ + else + tmp = 0; + + /* Change Shim mdio control reg to fix host not acking at + * high frequencies + */ + if (tmp) { + bcma_write32(dev, 0x524, 0x1); /* write sel to enable */ + udelay(500); + + bcma_write32(dev, 0x524, tmp); + udelay(500); + bcma_write32(dev, 0x524, 0x4ab); + udelay(500); + bcma_read32(dev, 0x528); + bcma_write32(dev, 0x528, 0x80000000); + } + } +#endif /* CONFIG_BCMA_DRIVER_MIPS */ +} + +/* based on arch/mips/brcm-boards/bcm947xx/pcibios.c */ +static void __devinit bcma_hcd_init_chip(struct bcma_device *dev) +{ + u32 tmp; + + /* + * USB 2.0 special considerations: + * + * 1. Since the core supports both OHCI and EHCI functions, it must + * only be reset once. + * + * 2. In addition to the standard SI reset sequence, the Host Control + * Register must be programmed to bring the USB core and various + * phy components out of reset. + */ + if (!bcma_core_is_enabled(dev)) { + bcma_core_enable(dev, 0); + mdelay(10); + if (dev->id.rev >= 5) { + /* Enable Misc PLL */ + tmp = bcma_read32(dev, 0x1e0); + tmp |= 0x100; + bcma_write32(dev, 0x1e0, tmp); + if (bcma_wait_bits(dev, 0x1e0, 1 << 24, 100)) + printk(KERN_EMERG "Failed to enable misc PPL!\n"); + + /* Take out of resets */ + bcma_write32(dev, 0x200, 0x4ff); + udelay(25); + bcma_write32(dev, 0x200, 0x6ff); + udelay(25); + + /* Make sure digital and AFE are locked in USB PHY */ + bcma_write32(dev, 0x524, 0x6b); + udelay(50); + tmp = bcma_read32(dev, 0x524); + udelay(50); + bcma_write32(dev, 0x524, 0xab); + udelay(50); + tmp = bcma_read32(dev, 0x524); + udelay(50); + bcma_write32(dev, 0x524, 0x2b); + udelay(50); + tmp = bcma_read32(dev, 0x524); + udelay(50); + bcma_write32(dev, 0x524, 0x10ab); + udelay(50); + tmp = bcma_read32(dev, 0x524); + + if (bcma_wait_bits(dev, 0x528, 0xc000, 10000)) { + tmp = bcma_read32(dev, 0x528); + printk(KERN_EMERG + "USB20H mdio_rddata 0x%08x\n", tmp); + } + bcma_write32(dev, 0x528, 0x80000000); + tmp = bcma_read32(dev, 0x314); + udelay(265); + bcma_write32(dev, 0x200, 0x7ff); + udelay(10); + + /* Take USB and HSIC out of non-driving modes */ + bcma_write32(dev, 0x510, 0); + } else { + bcma_write32(dev, 0x200, 0x7ff); + + udelay(1); + } + + bcma_hcd_4716wa(dev); + } +} + +static const struct usb_ehci_pdata ehci_pdata = { +}; + +static const struct usb_ohci_pdata ohci_pdata = { +}; + +static struct platform_device * __devinit +bcma_hcd_create_pdev(struct bcma_device *dev, bool ohci, u32 addr) +{ + struct platform_device *hci_dev; + struct resource hci_res[2]; + int ret = -ENOMEM; + + memset(hci_res, 0, sizeof(hci_res)); + + hci_res[0].start = addr; + hci_res[0].end = hci_res[0].start + 0x1000 - 1; + hci_res[0].flags = IORESOURCE_MEM; + + hci_res[1].start = dev->irq; + hci_res[1].flags = IORESOURCE_IRQ; + + hci_dev = platform_device_alloc(ohci ? "ohci-platform" : + "ehci-platform" , 0); + if (!hci_dev) + return NULL; + + hci_dev->dev.parent = &dev->dev; + hci_dev->dev.dma_mask = &hci_dev->dev.coherent_dma_mask; + + ret = platform_device_add_resources(hci_dev, hci_res, + ARRAY_SIZE(hci_res)); + if (ret) + goto err_alloc; + if (ohci) + ret = platform_device_add_data(hci_dev, &ohci_pdata, + sizeof(ohci_pdata)); + else + ret = platform_device_add_data(hci_dev, &ehci_pdata, + sizeof(ehci_pdata)); + if (ret) + goto err_alloc; + ret = platform_device_add(hci_dev); + if (ret) + goto err_alloc; + + return hci_dev; + +err_alloc: + platform_device_put(hci_dev); + return ERR_PTR(ret); +} + +static int __devinit bcma_hcd_probe(struct bcma_device *dev) +{ + int err; + u16 chipid_top; + u32 ohci_addr; + struct bcma_hcd_device *usb_dev; + struct bcma_chipinfo *chipinfo; + + chipinfo = &dev->bus->chipinfo; + /* USBcores are only connected on embedded devices. */ + chipid_top = (chipinfo->id & 0xFF00); + if (chipid_top != 0x4700 && chipid_top != 0x5300) + return -ENODEV; + + /* TODO: Probably need checks here; is the core connected? */ + + if (dma_set_mask(dev->dma_dev, DMA_BIT_MASK(32)) || + dma_set_coherent_mask(dev->dma_dev, DMA_BIT_MASK(32))) + return -EOPNOTSUPP; + + usb_dev = kzalloc(sizeof(struct bcma_hcd_device), GFP_KERNEL); + if (!usb_dev) + return -ENOMEM; + + bcma_hcd_init_chip(dev); + + /* In AI chips EHCI is addrspace 0, OHCI is 1 */ + ohci_addr = dev->addr1; + if ((chipinfo->id == 0x5357 || chipinfo->id == 0x4749) + && chipinfo->rev == 0) + ohci_addr = 0x18009000; + + usb_dev->ohci_dev = bcma_hcd_create_pdev(dev, true, ohci_addr); + if (IS_ERR(usb_dev->ohci_dev)) { + err = PTR_ERR(usb_dev->ohci_dev); + goto err_free_usb_dev; + } + + usb_dev->ehci_dev = bcma_hcd_create_pdev(dev, false, dev->addr); + if (IS_ERR(usb_dev->ehci_dev)) { + err = PTR_ERR(usb_dev->ehci_dev); + goto err_unregister_ohci_dev; + } + + bcma_set_drvdata(dev, usb_dev); + return 0; + +err_unregister_ohci_dev: + platform_device_unregister(usb_dev->ohci_dev); +err_free_usb_dev: + kfree(usb_dev); + return err; +} + +static void __devexit bcma_hcd_remove(struct bcma_device *dev) +{ + struct bcma_hcd_device *usb_dev = bcma_get_drvdata(dev); + struct platform_device *ohci_dev = usb_dev->ohci_dev; + struct platform_device *ehci_dev = usb_dev->ehci_dev; + + if (ohci_dev) + platform_device_unregister(ohci_dev); + if (ehci_dev) + platform_device_unregister(ehci_dev); + + bcma_core_disable(dev, 0); +} + +static void bcma_hcd_shutdown(struct bcma_device *dev) +{ + bcma_core_disable(dev, 0); +} + +#ifdef CONFIG_PM + +static int bcma_hcd_suspend(struct bcma_device *dev) +{ + bcma_core_disable(dev, 0); + + return 0; +} + +static int bcma_hcd_resume(struct bcma_device *dev) +{ + bcma_core_enable(dev, 0); + + return 0; +} + +#else /* !CONFIG_PM */ +#define bcma_hcd_suspend NULL +#define bcma_hcd_resume NULL +#endif /* CONFIG_PM */ + +static const struct bcma_device_id bcma_hcd_table[] __devinitconst = { + BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_USB20_HOST, BCMA_ANY_REV, BCMA_ANY_CLASS), + BCMA_CORETABLE_END +}; +MODULE_DEVICE_TABLE(bcma, bcma_hcd_table); + +static struct bcma_driver bcma_hcd_driver = { + .name = KBUILD_MODNAME, + .id_table = bcma_hcd_table, + .probe = bcma_hcd_probe, + .remove = __devexit_p(bcma_hcd_remove), + .shutdown = bcma_hcd_shutdown, + .suspend = bcma_hcd_suspend, + .resume = bcma_hcd_resume, +}; + +static int __init bcma_hcd_init(void) +{ + return bcma_driver_register(&bcma_hcd_driver); +} +module_init(bcma_hcd_init); + +static void __exit bcma_hcd_exit(void) +{ + bcma_driver_unregister(&bcma_hcd_driver); +} +module_exit(bcma_hcd_exit); diff --git a/drivers/usb/host/ehci-dbg.c b/drivers/usb/host/ehci-dbg.c index 680e1a31fb8..7561966fbdc 100644 --- a/drivers/usb/host/ehci-dbg.c +++ b/drivers/usb/host/ehci-dbg.c @@ -1025,10 +1025,8 @@ static ssize_t debug_lpm_write(struct file *file, const char __user *user_buf, if (strict_strtoul(buf + 5, 16, &hird)) return -EINVAL; printk(KERN_INFO "setting hird %s %lu\n", buf + 6, hird); - temp = ehci_readl(ehci, &ehci->regs->command); - temp &= ~CMD_HIRD; - temp |= hird << 24; - ehci_writel(ehci, temp, &ehci->regs->command); + ehci->command = (ehci->command & ~CMD_HIRD) | (hird << 24); + ehci_writel(ehci, ehci->command, &ehci->regs->command); } else if (strncmp(buf, "disable", 7) == 0) { if (strict_strtoul(buf + 8, 10, &port)) return -EINVAL; diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index 3e7345172e0..43362577b54 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -1,6 +1,6 @@ /* * Copyright 2005-2009 MontaVista Software, Inc. - * Copyright 2008 Freescale Semiconductor, Inc. + * Copyright 2008,2012 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -150,8 +150,7 @@ static int usb_hcd_fsl_probe(const struct hc_driver *driver, retval = otg_set_host(ehci->transceiver->otg, &ehci_to_hcd(ehci)->self); if (retval) { - if (ehci->transceiver) - put_device(ehci->transceiver->dev); + usb_put_transceiver(ehci->transceiver); goto err4; } } else { @@ -195,7 +194,7 @@ static void usb_hcd_fsl_remove(struct usb_hcd *hcd, if (ehci->transceiver) { otg_set_host(ehci->transceiver->otg, NULL); - put_device(ehci->transceiver->dev); + usb_put_transceiver(ehci->transceiver); } usb_remove_hcd(hcd); @@ -211,19 +210,32 @@ static void usb_hcd_fsl_remove(struct usb_hcd *hcd, usb_put_hcd(hcd); } -static void ehci_fsl_setup_phy(struct ehci_hcd *ehci, +static void ehci_fsl_setup_phy(struct usb_hcd *hcd, enum fsl_usb2_phy_modes phy_mode, unsigned int port_offset) { - u32 portsc; - struct usb_hcd *hcd = ehci_to_hcd(ehci); + u32 portsc, temp; + struct ehci_hcd *ehci = hcd_to_ehci(hcd); void __iomem *non_ehci = hcd->regs; + struct device *dev = hcd->self.controller; + struct fsl_usb2_platform_data *pdata = dev->platform_data; + + if (pdata->controller_ver < 0) { + dev_warn(hcd->self.controller, "Could not get controller version\n"); + return; + } portsc = ehci_readl(ehci, &ehci->regs->port_status[port_offset]); portsc &= ~(PORT_PTS_MSK | PORT_PTS_PTW); switch (phy_mode) { case FSL_USB2_PHY_ULPI: + if (pdata->controller_ver) { + /* controller version 1.6 or above */ + temp = in_be32(non_ehci + FSL_SOC_USB_CTRL); + out_be32(non_ehci + FSL_SOC_USB_CTRL, temp | + USB_CTRL_USB_EN | ULPI_PHY_CLK_SEL); + } portsc |= PORT_PTS_ULPI; break; case FSL_USB2_PHY_SERIAL: @@ -233,8 +245,18 @@ static void ehci_fsl_setup_phy(struct ehci_hcd *ehci, portsc |= PORT_PTS_PTW; /* fall through */ case FSL_USB2_PHY_UTMI: + if (pdata->controller_ver) { + /* controller version 1.6 or above */ + temp = in_be32(non_ehci + FSL_SOC_USB_CTRL); + out_be32(non_ehci + FSL_SOC_USB_CTRL, temp | + UTMI_PHY_EN | USB_CTRL_USB_EN); + mdelay(FSL_UTMI_PHY_DLY); /* Delay for UTMI PHY CLK to + become stable - 10ms*/ + } /* enable UTMI PHY */ - setbits32(non_ehci + FSL_SOC_USB_CTRL, CTRL_UTMI_PHY_EN); + if (pdata->have_sysif_regs) + setbits32(non_ehci + FSL_SOC_USB_CTRL, + CTRL_UTMI_PHY_EN); portsc |= PORT_PTS_UTMI; break; case FSL_USB2_PHY_NONE: @@ -271,7 +293,7 @@ static void ehci_fsl_usb_setup(struct ehci_hcd *ehci) if ((pdata->operating_mode == FSL_USB2_DR_HOST) || (pdata->operating_mode == FSL_USB2_DR_OTG)) - ehci_fsl_setup_phy(ehci, pdata->phy_mode, 0); + ehci_fsl_setup_phy(hcd, pdata->phy_mode, 0); if (pdata->operating_mode == FSL_USB2_MPH_HOST) { unsigned int chip, rev, svr; @@ -285,9 +307,9 @@ static void ehci_fsl_usb_setup(struct ehci_hcd *ehci) ehci->has_fsl_port_bug = 1; if (pdata->port_enables & FSL_USB2_PORT0_ENABLED) - ehci_fsl_setup_phy(ehci, pdata->phy_mode, 0); + ehci_fsl_setup_phy(hcd, pdata->phy_mode, 0); if (pdata->port_enables & FSL_USB2_PORT1_ENABLED) - ehci_fsl_setup_phy(ehci, pdata->phy_mode, 1); + ehci_fsl_setup_phy(hcd, pdata->phy_mode, 1); } if (pdata->have_sysif_regs) { diff --git a/drivers/usb/host/ehci-fsl.h b/drivers/usb/host/ehci-fsl.h index 863fb0c080d..88403684d10 100644 --- a/drivers/usb/host/ehci-fsl.h +++ b/drivers/usb/host/ehci-fsl.h @@ -1,4 +1,4 @@ -/* Copyright (C) 2005-2010 Freescale Semiconductor, Inc. +/* Copyright (C) 2005-2010,2012 Freescale Semiconductor, Inc. * Copyright (c) 2005 MontaVista Software * * This program is free software; you can redistribute it and/or modify it @@ -50,4 +50,15 @@ #define CTRL_UTMI_PHY_EN (1<<9) #define CTRL_PHY_CLK_VALID (1 << 17) #define SNOOP_SIZE_2GB 0x1e + +/* control Register Bit Masks */ +#define ULPI_INT_EN (1<<0) +#define WU_INT_EN (1<<1) +#define USB_CTRL_USB_EN (1<<2) +#define LINE_STATE_FILTER__EN (1<<3) +#define KEEP_OTG_ON (1<<4) +#define OTG_PORT (1<<5) +#define PLL_RESET (1<<8) +#define UTMI_PHY_EN (1<<9) +#define ULPI_PHY_CLK_SEL (1<<10) #endif /* _EHCI_FSL_H */ diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 057cdda7a48..b100f5f9f4b 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -226,8 +226,13 @@ static int ehci_halt (struct ehci_hcd *ehci) if ((temp & STS_HALT) != 0) return 0; + /* + * This routine gets called during probe before ehci->command + * has been initialized, so we can't rely on its value. + */ + ehci->command &= ~CMD_RUN; temp = ehci_readl(ehci, &ehci->regs->command); - temp &= ~CMD_RUN; + temp &= ~(CMD_RUN | CMD_IAAD); ehci_writel(ehci, temp, &ehci->regs->command); return handshake (ehci, &ehci->regs->status, STS_HALT, STS_HALT, 16 * 125); @@ -347,6 +352,8 @@ static int ehci_reset (struct ehci_hcd *ehci) if (ehci->debug) dbgp_external_startup(); + ehci->port_c_suspend = ehci->suspended_ports = + ehci->resuming_ports = 0; return retval; } @@ -361,16 +368,14 @@ static void ehci_quiesce (struct ehci_hcd *ehci) #endif /* wait for any schedule enables/disables to take effect */ - temp = ehci_readl(ehci, &ehci->regs->command) << 10; - temp &= STS_ASS | STS_PSS; + temp = (ehci->command << 10) & (STS_ASS | STS_PSS); if (handshake_on_error_set_halt(ehci, &ehci->regs->status, STS_ASS | STS_PSS, temp, 16 * 125)) return; /* then disable anything that's still active */ - temp = ehci_readl(ehci, &ehci->regs->command); - temp &= ~(CMD_ASE | CMD_IAAD | CMD_PSE); - ehci_writel(ehci, temp, &ehci->regs->command); + ehci->command &= ~(CMD_ASE | CMD_PSE); + ehci_writel(ehci, ehci->command, &ehci->regs->command); /* hardware can take 16 microframes to turn off ... */ handshake_on_error_set_halt(ehci, &ehci->regs->status, @@ -415,9 +420,6 @@ static void ehci_iaa_watchdog(unsigned long param) * CMD_IAAD when it sets STS_IAA.) */ cmd = ehci_readl(ehci, &ehci->regs->command); - if (cmd & CMD_IAAD) - ehci_writel(ehci, cmd & ~CMD_IAAD, - &ehci->regs->command); /* If IAA is set here it either legitimately triggered * before we cleared IAAD above (but _way_ late, so we'll @@ -856,8 +858,13 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd) goto dead; } + /* + * We don't use STS_FLR, but some controllers don't like it to + * remain on, so mask it out along with the other status bits. + */ + masked_status = status & (INTR_MASK | STS_FLR); + /* Shared IRQ? */ - masked_status = status & INTR_MASK; if (!masked_status || unlikely(ehci->rh_state == EHCI_RH_HALTED)) { spin_unlock(&ehci->lock); return IRQ_NONE; @@ -887,11 +894,8 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd) /* complete the unlinking of some qh [4.15.2.3] */ if (status & STS_IAA) { /* guard against (alleged) silicon errata */ - if (cmd & CMD_IAAD) { - ehci_writel(ehci, cmd & ~CMD_IAAD, - &ehci->regs->command); + if (cmd & CMD_IAAD) ehci_dbg(ehci, "IAA with IAAD still set?\n"); - } if (ehci->reclaim) { COUNT(ehci->stats.reclaim); end_unlink_async(ehci); @@ -908,7 +912,7 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd) pcd_status = status; /* resume root hub? */ - if (!(cmd & CMD_RUN)) + if (ehci->rh_state == EHCI_RH_SUSPENDED) usb_hcd_resume_root_hub(hcd); /* get per-port change detect bits */ @@ -939,6 +943,7 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd) * like usb_port_resume() does. */ ehci->reset_done[i] = jiffies + msecs_to_jiffies(25); + set_bit(i, &ehci->resuming_ports); ehci_dbg (ehci, "port %d remote wakeup\n", i + 1); mod_timer(&hcd->rh_timer, ehci->reset_done[i]); } @@ -1240,6 +1245,13 @@ static int ehci_get_frame (struct usb_hcd *hcd) } /*-------------------------------------------------------------------------*/ +/* + * The EHCI in ChipIdea HDRC cannot be a separate module or device, + * because its registers (and irq) are shared between host/gadget/otg + * functions and in order to facilitate role switching we cannot + * give the ehci driver exclusive access to those. + */ +#ifndef CHIPIDEA_EHCI MODULE_DESCRIPTION(DRIVER_DESC); MODULE_AUTHOR (DRIVER_AUTHOR); @@ -1370,6 +1382,11 @@ MODULE_LICENSE ("GPL"); #define PLATFORM_DRIVER ehci_ls1x_driver #endif +#ifdef CONFIG_MIPS_SEAD3 +#include "ehci-sead3.c" +#define PLATFORM_DRIVER ehci_hcd_sead3_driver +#endif + #ifdef CONFIG_USB_EHCI_HCD_PLATFORM #include "ehci-platform.c" #define PLATFORM_DRIVER ehci_platform_driver @@ -1493,3 +1510,4 @@ static void __exit ehci_hcd_cleanup(void) } module_exit(ehci_hcd_cleanup); +#endif /* CHIPIDEA_EHCI */ diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index 256fbd42e48..fc9e7cc6ac9 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -223,22 +223,16 @@ static int ehci_bus_suspend (struct usb_hcd *hcd) * remote wakeup, we must fail the suspend. */ if (hcd->self.root_hub->do_remote_wakeup) { - port = HCS_N_PORTS(ehci->hcs_params); - while (port--) { - if (ehci->reset_done[port] != 0) { - spin_unlock_irq(&ehci->lock); - ehci_dbg(ehci, "suspend failed because " - "port %d is resuming\n", - port + 1); - return -EBUSY; - } + if (ehci->resuming_ports) { + spin_unlock_irq(&ehci->lock); + ehci_dbg(ehci, "suspend failed because a port is resuming\n"); + return -EBUSY; } } /* stop schedules, clean any completed work */ if (ehci->rh_state == EHCI_RH_RUNNING) ehci_quiesce (ehci); - ehci->command = ehci_readl(ehci, &ehci->regs->command); ehci_work(ehci); /* Unlike other USB host controller types, EHCI doesn't have @@ -379,6 +373,7 @@ static int ehci_bus_resume (struct usb_hcd *hcd) ehci_writel(ehci, (u32) ehci->async->qh_dma, &ehci->regs->async_next); /* restore CMD_RUN, framelist size, and irq threshold */ + ehci->command |= CMD_RUN; ehci_writel(ehci, ehci->command, &ehci->regs->command); ehci->rh_state = EHCI_RH_RUNNING; @@ -536,7 +531,8 @@ static int check_reset_complete ( if (ehci->has_amcc_usb23) set_ohci_hcfs(ehci, 1); } else { - ehci_dbg (ehci, "port %d high speed\n", index + 1); + ehci_dbg(ehci, "port %d reset complete, port enabled\n", + index + 1); /* ensure 440EPx ohci controller state is suspended */ if (ehci->has_amcc_usb23) set_ohci_hcfs(ehci, 0); @@ -554,16 +550,12 @@ static int ehci_hub_status_data (struct usb_hcd *hcd, char *buf) { struct ehci_hcd *ehci = hcd_to_ehci (hcd); - u32 temp, status = 0; + u32 temp, status; u32 mask; int ports, i, retval = 1; unsigned long flags; u32 ppcd = 0; - /* if !USB_SUSPEND, root hub timers won't get shut down ... */ - if (ehci->rh_state != EHCI_RH_RUNNING) - return 0; - /* init status to no-changes */ buf [0] = 0; ports = HCS_N_PORTS (ehci->hcs_params); @@ -572,6 +564,11 @@ ehci_hub_status_data (struct usb_hcd *hcd, char *buf) retval++; } + /* Inform the core about resumes-in-progress by returning + * a non-zero value even if there are no status changes. + */ + status = ehci->resuming_ports; + /* Some boards (mostly VIA?) report bogus overcurrent indications, * causing massive log spam unless we completely ignore them. It * may be relevant that VIA VT8235 controllers, where PORT_POWER is @@ -703,6 +700,7 @@ static int ehci_hub_control ( goto error; wIndex--; temp = ehci_readl(ehci, status_reg); + temp &= ~PORT_RWC_BITS; /* * Even if OWNER is set, so the port is owned by the @@ -716,8 +714,7 @@ static int ehci_hub_control ( ehci_writel(ehci, temp & ~PORT_PE, status_reg); break; case USB_PORT_FEAT_C_ENABLE: - ehci_writel(ehci, (temp & ~PORT_RWC_BITS) | PORT_PEC, - status_reg); + ehci_writel(ehci, temp | PORT_PEC, status_reg); break; case USB_PORT_FEAT_SUSPEND: if (temp & PORT_RESET) @@ -746,7 +743,7 @@ static int ehci_hub_control ( spin_lock_irqsave(&ehci->lock, flags); } /* resume signaling for 20 msec */ - temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS); + temp &= ~PORT_WAKE_BITS; ehci_writel(ehci, temp | PORT_RESUME, status_reg); ehci->reset_done[wIndex] = jiffies + msecs_to_jiffies(20); @@ -756,9 +753,8 @@ static int ehci_hub_control ( break; case USB_PORT_FEAT_POWER: if (HCS_PPC (ehci->hcs_params)) - ehci_writel(ehci, - temp & ~(PORT_RWC_BITS | PORT_POWER), - status_reg); + ehci_writel(ehci, temp & ~PORT_POWER, + status_reg); break; case USB_PORT_FEAT_C_CONNECTION: if (ehci->has_lpm) { @@ -766,12 +762,10 @@ static int ehci_hub_control ( temp &= ~PORT_LPM; temp &= ~PORT_DEV_ADDR; } - ehci_writel(ehci, (temp & ~PORT_RWC_BITS) | PORT_CSC, - status_reg); + ehci_writel(ehci, temp | PORT_CSC, status_reg); break; case USB_PORT_FEAT_C_OVER_CURRENT: - ehci_writel(ehci, (temp & ~PORT_RWC_BITS) | PORT_OCC, - status_reg); + ehci_writel(ehci, temp | PORT_OCC, status_reg); break; case USB_PORT_FEAT_C_RESET: /* GetPortStatus clears reset */ @@ -846,6 +840,7 @@ static int ehci_hub_control ( ehci_writel(ehci, temp & ~(PORT_RWC_BITS | PORT_RESUME), status_reg); + clear_bit(wIndex, &ehci->resuming_ports); retval = handshake(ehci, status_reg, PORT_RESUME, 0, 2000 /* 2msec */); if (retval != 0) { @@ -864,6 +859,7 @@ static int ehci_hub_control ( ehci->reset_done[wIndex])) { status |= USB_PORT_STAT_C_RESET << 16; ehci->reset_done [wIndex] = 0; + clear_bit(wIndex, &ehci->resuming_ports); /* force reset to complete */ ehci_writel(ehci, temp & ~(PORT_RWC_BITS | PORT_RESET), @@ -884,8 +880,10 @@ static int ehci_hub_control ( ehci_readl(ehci, status_reg)); } - if (!(temp & (PORT_RESUME|PORT_RESET))) + if (!(temp & (PORT_RESUME|PORT_RESET))) { ehci->reset_done[wIndex] = 0; + clear_bit(wIndex, &ehci->resuming_ports); + } /* transfer dedicated ports to the companion hc */ if ((temp & PORT_CONNECT) && @@ -920,6 +918,7 @@ static int ehci_hub_control ( status |= USB_PORT_STAT_SUSPEND; } else if (test_bit(wIndex, &ehci->suspended_ports)) { clear_bit(wIndex, &ehci->suspended_ports); + clear_bit(wIndex, &ehci->resuming_ports); ehci->reset_done[wIndex] = 0; if (temp & PORT_PE) set_bit(wIndex, &ehci->port_c_suspend); diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c index a797d51ecbe..c778ffe4e4e 100644 --- a/drivers/usb/host/ehci-mxc.c +++ b/drivers/usb/host/ehci-mxc.c @@ -32,7 +32,7 @@ #define ULPI_VIEWPORT_OFFSET 0x170 struct ehci_mxc_priv { - struct clk *usbclk, *ahbclk, *phy1clk; + struct clk *usbclk, *ahbclk, *phyclk; struct usb_hcd *hcd; }; @@ -166,31 +166,26 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev) } /* enable clocks */ - priv->usbclk = clk_get(dev, "usb"); + priv->usbclk = clk_get(dev, "ipg"); if (IS_ERR(priv->usbclk)) { ret = PTR_ERR(priv->usbclk); goto err_clk; } - clk_enable(priv->usbclk); + clk_prepare_enable(priv->usbclk); - if (!cpu_is_mx35() && !cpu_is_mx25()) { - priv->ahbclk = clk_get(dev, "usb_ahb"); - if (IS_ERR(priv->ahbclk)) { - ret = PTR_ERR(priv->ahbclk); - goto err_clk_ahb; - } - clk_enable(priv->ahbclk); + priv->ahbclk = clk_get(dev, "ahb"); + if (IS_ERR(priv->ahbclk)) { + ret = PTR_ERR(priv->ahbclk); + goto err_clk_ahb; } + clk_prepare_enable(priv->ahbclk); /* "dr" device has its own clock on i.MX51 */ - if (cpu_is_mx51() && (pdev->id == 0)) { - priv->phy1clk = clk_get(dev, "usb_phy1"); - if (IS_ERR(priv->phy1clk)) { - ret = PTR_ERR(priv->phy1clk); - goto err_clk_phy; - } - clk_enable(priv->phy1clk); - } + priv->phyclk = clk_get(dev, "phy"); + if (IS_ERR(priv->phyclk)) + priv->phyclk = NULL; + if (priv->phyclk) + clk_prepare_enable(priv->phyclk); /* call platform specific init function */ @@ -265,17 +260,15 @@ err_add: if (pdata && pdata->exit) pdata->exit(pdev); err_init: - if (priv->phy1clk) { - clk_disable(priv->phy1clk); - clk_put(priv->phy1clk); - } -err_clk_phy: - if (priv->ahbclk) { - clk_disable(priv->ahbclk); - clk_put(priv->ahbclk); + if (priv->phyclk) { + clk_disable_unprepare(priv->phyclk); + clk_put(priv->phyclk); } + + clk_disable_unprepare(priv->ahbclk); + clk_put(priv->ahbclk); err_clk_ahb: - clk_disable(priv->usbclk); + clk_disable_unprepare(priv->usbclk); clk_put(priv->usbclk); err_clk: iounmap(hcd->regs); @@ -307,15 +300,14 @@ static int __exit ehci_mxc_drv_remove(struct platform_device *pdev) usb_put_hcd(hcd); platform_set_drvdata(pdev, NULL); - clk_disable(priv->usbclk); + clk_disable_unprepare(priv->usbclk); clk_put(priv->usbclk); - if (priv->ahbclk) { - clk_disable(priv->ahbclk); - clk_put(priv->ahbclk); - } - if (priv->phy1clk) { - clk_disable(priv->phy1clk); - clk_put(priv->phy1clk); + clk_disable_unprepare(priv->ahbclk); + clk_put(priv->ahbclk); + + if (priv->phyclk) { + clk_disable_unprepare(priv->phyclk); + clk_put(priv->phyclk); } kfree(priv); diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c index bba9850f32f..a44294d1349 100644 --- a/drivers/usb/host/ehci-omap.c +++ b/drivers/usb/host/ehci-omap.c @@ -42,6 +42,7 @@ #include <plat/usb.h> #include <linux/regulator/consumer.h> #include <linux/pm_runtime.h> +#include <linux/gpio.h> /* EHCI Register Set */ #define EHCI_INSNREG04 (0xA0) @@ -191,6 +192,19 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) } } + if (pdata->phy_reset) { + if (gpio_is_valid(pdata->reset_gpio_port[0])) + gpio_request_one(pdata->reset_gpio_port[0], + GPIOF_OUT_INIT_LOW, "USB1 PHY reset"); + + if (gpio_is_valid(pdata->reset_gpio_port[1])) + gpio_request_one(pdata->reset_gpio_port[1], + GPIOF_OUT_INIT_LOW, "USB2 PHY reset"); + + /* Hold the PHY in RESET for enough time till DIR is high */ + udelay(10); + } + pm_runtime_enable(dev); pm_runtime_get_sync(dev); @@ -228,6 +242,19 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) ehci_reset(omap_ehci); + if (pdata->phy_reset) { + /* Hold the PHY in RESET for enough time till + * PHY is settled and ready + */ + udelay(10); + + if (gpio_is_valid(pdata->reset_gpio_port[0])) + gpio_set_value_cansleep(pdata->reset_gpio_port[0], 1); + + if (gpio_is_valid(pdata->reset_gpio_port[1])) + gpio_set_value_cansleep(pdata->reset_gpio_port[1], 1); + } + ret = usb_add_hcd(hcd, irq, IRQF_SHARED); if (ret) { dev_err(dev, "failed to add hcd with err %d\n", ret); @@ -259,8 +286,9 @@ err_io: */ static int ehci_hcd_omap_remove(struct platform_device *pdev) { - struct device *dev = &pdev->dev; - struct usb_hcd *hcd = dev_get_drvdata(dev); + struct device *dev = &pdev->dev; + struct usb_hcd *hcd = dev_get_drvdata(dev); + struct ehci_hcd_omap_platform_data *pdata = dev->platform_data; usb_remove_hcd(hcd); disable_put_regulator(dev->platform_data); @@ -269,6 +297,13 @@ static int ehci_hcd_omap_remove(struct platform_device *pdev) pm_runtime_put_sync(dev); pm_runtime_disable(dev); + if (pdata->phy_reset) { + if (gpio_is_valid(pdata->reset_gpio_port[0])) + gpio_free(pdata->reset_gpio_port[0]); + + if (gpio_is_valid(pdata->reset_gpio_port[1])) + gpio_free(pdata->reset_gpio_port[1]); + } return 0; } diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c index 6c6a5a3b4ea..82de1073aa5 100644 --- a/drivers/usb/host/ehci-orion.c +++ b/drivers/usb/host/ehci-orion.c @@ -12,6 +12,7 @@ #include <linux/module.h> #include <linux/platform_device.h> #include <linux/mbus.h> +#include <linux/clk.h> #include <plat/ehci-orion.h> #define rdl(off) __raw_readl(hcd->regs + (off)) @@ -198,6 +199,7 @@ static int __devinit ehci_orion_drv_probe(struct platform_device *pdev) struct resource *res; struct usb_hcd *hcd; struct ehci_hcd *ehci; + struct clk *clk; void __iomem *regs; int irq, err; @@ -238,6 +240,14 @@ static int __devinit ehci_orion_drv_probe(struct platform_device *pdev) goto err2; } + /* Not all platforms can gate the clock, so it is not + an error if the clock does not exists. */ + clk = clk_get(&pdev->dev, NULL); + if (!IS_ERR(clk)) { + clk_prepare_enable(clk); + clk_put(clk); + } + hcd = usb_create_hcd(&ehci_orion_hc_driver, &pdev->dev, dev_name(&pdev->dev)); if (!hcd) { @@ -301,12 +311,18 @@ err1: static int __exit ehci_orion_drv_remove(struct platform_device *pdev) { struct usb_hcd *hcd = platform_get_drvdata(pdev); + struct clk *clk; usb_remove_hcd(hcd); iounmap(hcd->regs); release_mem_region(hcd->rsrc_start, hcd->rsrc_len); usb_put_hcd(hcd); + clk = clk_get(&pdev->dev, NULL); + if (!IS_ERR(clk)) { + clk_disable_unprepare(clk); + clk_put(clk); + } return 0; } diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index 01bb7241d6e..bc94d7bf072 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -144,6 +144,14 @@ static int ehci_pci_setup(struct usb_hcd *hcd) hcd->has_tt = 1; tdi_reset(ehci); } + if (pdev->subsystem_vendor == PCI_VENDOR_ID_ASUSTEK) { + /* EHCI #1 or #2 on 6 Series/C200 Series chipset */ + if (pdev->device == 0x1c26 || pdev->device == 0x1c2d) { + ehci_info(ehci, "broken D3 during system sleep on ASUS\n"); + hcd->broken_pci_sleep = 1; + device_set_wakeup_capable(&pdev->dev, false); + } + } break; case PCI_VENDOR_ID_TDI: if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) { @@ -360,7 +368,9 @@ static bool usb_is_intel_switchable_ehci(struct pci_dev *pdev) { return pdev->class == PCI_CLASS_SERIAL_USB_EHCI && pdev->vendor == PCI_VENDOR_ID_INTEL && - pdev->device == 0x1E26; + (pdev->device == 0x1E26 || + pdev->device == 0x8C2D || + pdev->device == 0x8C26); } static void ehci_enable_xhci_companion(void) diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c index d238b4e24bb..dfe881a34ae 100644 --- a/drivers/usb/host/ehci-platform.c +++ b/drivers/usb/host/ehci-platform.c @@ -75,8 +75,6 @@ static const struct hc_driver ehci_platform_hc_driver = { .relinquish_port = ehci_relinquish_port, .port_handed_over = ehci_port_handed_over, - .update_device = ehci_update_device, - .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, }; @@ -94,12 +92,12 @@ static int __devinit ehci_platform_probe(struct platform_device *dev) irq = platform_get_irq(dev, 0); if (irq < 0) { - pr_err("no irq provieded"); + pr_err("no irq provided"); return irq; } res_mem = platform_get_resource(dev, IORESOURCE_MEM, 0); if (!res_mem) { - pr_err("no memory recourse provieded"); + pr_err("no memory recourse provided"); return -ENXIO; } diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c index 36ca5077cdf..4378bf72bba 100644 --- a/drivers/usb/host/ehci-q.c +++ b/drivers/usb/host/ehci-q.c @@ -943,7 +943,8 @@ qh_make ( } break; default: - dbg ("bogus dev %p speed %d", urb->dev, urb->dev->speed); + ehci_dbg(ehci, "bogus dev %p speed %d\n", urb->dev, + urb->dev->speed); done: qh_put (qh); return NULL; @@ -981,14 +982,12 @@ static void qh_link_async (struct ehci_hcd *ehci, struct ehci_qh *qh) head = ehci->async; timer_action_done (ehci, TIMER_ASYNC_OFF); if (!head->qh_next.qh) { - u32 cmd = ehci_readl(ehci, &ehci->regs->command); - - if (!(cmd & CMD_ASE)) { + if (!(ehci->command & CMD_ASE)) { /* in case a clear of CMD_ASE didn't take yet */ (void)handshake(ehci, &ehci->regs->status, STS_ASS, 0, 150); - cmd |= CMD_ASE; - ehci_writel(ehci, cmd, &ehci->regs->command); + ehci->command |= CMD_ASE; + ehci_writel(ehci, ehci->command, &ehci->regs->command); /* posted write need not be known to HC yet ... */ } } @@ -1204,7 +1203,6 @@ static void end_unlink_async (struct ehci_hcd *ehci) static void start_unlink_async (struct ehci_hcd *ehci, struct ehci_qh *qh) { - int cmd = ehci_readl(ehci, &ehci->regs->command); struct ehci_qh *prev; #ifdef DEBUG @@ -1222,8 +1220,8 @@ static void start_unlink_async (struct ehci_hcd *ehci, struct ehci_qh *qh) if (ehci->rh_state != EHCI_RH_HALTED && !ehci->reclaim) { /* ... and CMD_IAAD clear */ - ehci_writel(ehci, cmd & ~CMD_ASE, - &ehci->regs->command); + ehci->command &= ~CMD_ASE; + ehci_writel(ehci, ehci->command, &ehci->regs->command); wmb (); // handshake later, if we need to timer_action_done (ehci, TIMER_ASYNC_OFF); @@ -1253,8 +1251,7 @@ static void start_unlink_async (struct ehci_hcd *ehci, struct ehci_qh *qh) return; } - cmd |= CMD_IAAD; - ehci_writel(ehci, cmd, &ehci->regs->command); + ehci_writel(ehci, ehci->command | CMD_IAAD, &ehci->regs->command); (void)ehci_readl(ehci, &ehci->regs->command); iaa_watchdog_start(ehci); } diff --git a/drivers/usb/host/ehci-s5p.c b/drivers/usb/host/ehci-s5p.c index f098e2a291a..c474cec064e 100644 --- a/drivers/usb/host/ehci-s5p.c +++ b/drivers/usb/host/ehci-s5p.c @@ -232,6 +232,8 @@ static int s5p_ehci_suspend(struct device *dev) if (pdata && pdata->phy_exit) pdata->phy_exit(pdev, S5P_USB_PHY_HOST); + clk_disable(s5p_ehci->clk); + return rc; } @@ -243,6 +245,8 @@ static int s5p_ehci_resume(struct device *dev) struct platform_device *pdev = to_platform_device(dev); struct s5p_ehci_platdata *pdata = pdev->dev.platform_data; + clk_enable(s5p_ehci->clk); + if (pdata && pdata->phy_init) pdata->phy_init(pdev, S5P_USB_PHY_HOST); diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c index a60679cbbf8..33182c6d1ff 100644 --- a/drivers/usb/host/ehci-sched.c +++ b/drivers/usb/host/ehci-sched.c @@ -481,7 +481,6 @@ static int tt_no_collision ( static int enable_periodic (struct ehci_hcd *ehci) { - u32 cmd; int status; if (ehci->periodic_sched++) @@ -497,8 +496,8 @@ static int enable_periodic (struct ehci_hcd *ehci) return status; } - cmd = ehci_readl(ehci, &ehci->regs->command) | CMD_PSE; - ehci_writel(ehci, cmd, &ehci->regs->command); + ehci->command |= CMD_PSE; + ehci_writel(ehci, ehci->command, &ehci->regs->command); /* posted write ... PSS happens later */ /* make sure ehci_work scans these */ @@ -511,7 +510,6 @@ static int enable_periodic (struct ehci_hcd *ehci) static int disable_periodic (struct ehci_hcd *ehci) { - u32 cmd; int status; if (--ehci->periodic_sched) @@ -537,8 +535,8 @@ static int disable_periodic (struct ehci_hcd *ehci) return status; } - cmd = ehci_readl(ehci, &ehci->regs->command) & ~CMD_PSE; - ehci_writel(ehci, cmd, &ehci->regs->command); + ehci->command &= ~CMD_PSE; + ehci_writel(ehci, ehci->command, &ehci->regs->command); /* posted write ... */ free_cached_lists(ehci); @@ -1333,34 +1331,36 @@ sitd_slot_ok ( if (mask & ~0xffff) return 0; + /* check bandwidth */ + uframe %= period_uframes; + frame = uframe >> 3; + +#ifdef CONFIG_USB_EHCI_TT_NEWSCHED + /* The tt's fullspeed bus bandwidth must be available. + * tt_available scheduling guarantees 10+% for control/bulk. + */ + uf = uframe & 7; + if (!tt_available(ehci, period_uframes >> 3, + stream->udev, frame, uf, stream->tt_usecs)) + return 0; +#else + /* tt must be idle for start(s), any gap, and csplit. + * assume scheduling slop leaves 10+% for control/bulk. + */ + if (!tt_no_collision(ehci, period_uframes >> 3, + stream->udev, frame, mask)) + return 0; +#endif + /* this multi-pass logic is simple, but performance may * suffer when the schedule data isn't cached. */ - - /* check bandwidth */ - uframe %= period_uframes; do { u32 max_used; frame = uframe >> 3; uf = uframe & 7; -#ifdef CONFIG_USB_EHCI_TT_NEWSCHED - /* The tt's fullspeed bus bandwidth must be available. - * tt_available scheduling guarantees 10+% for control/bulk. - */ - if (!tt_available (ehci, period_uframes << 3, - stream->udev, frame, uf, stream->tt_usecs)) - return 0; -#else - /* tt must be idle for start(s), any gap, and csplit. - * assume scheduling slop leaves 10+% for control/bulk. - */ - if (!tt_no_collision (ehci, period_uframes << 3, - stream->udev, frame, mask)) - return 0; -#endif - /* check starts (OUT uses more than one) */ max_used = ehci->uframe_periodic_max - stream->usecs; for (tmp = stream->raw_mask & 0xff; tmp; tmp >>= 1, uf++) { @@ -2358,7 +2358,8 @@ restart: * in the previous frame for completions. */ if (q.fstn->hw_prev != EHCI_LIST_END(ehci)) { - dbg ("ignoring completions from FSTNs"); + ehci_dbg(ehci, + "ignoring completions from FSTNs\n"); } type = Q_NEXT_TYPE(ehci, q.fstn->hw_next); q = q.fstn->fstn_next; @@ -2441,7 +2442,7 @@ restart: q = *q_p; break; default: - dbg ("corrupt type %d frame %d shadow %p", + ehci_dbg(ehci, "corrupt type %d frame %d shadow %p\n", type, frame, q.ptr); // BUG (); q.ptr = NULL; diff --git a/drivers/usb/host/ehci-sead3.c b/drivers/usb/host/ehci-sead3.c new file mode 100644 index 00000000000..cc199e87a7a --- /dev/null +++ b/drivers/usb/host/ehci-sead3.c @@ -0,0 +1,266 @@ +/* + * MIPS CI13320A EHCI Host Controller driver + * Based on "ehci-au1xxx.c" by K.Boge <karsten.boge@amd.com> + * + * Copyright (C) 2012 MIPS Technologies, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software Foundation, + * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/platform_device.h> + +static int ehci_sead3_setup(struct usb_hcd *hcd) +{ + int ret; + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + + ehci->caps = hcd->regs + 0x100; + +#ifdef __BIG_ENDIAN + ehci->big_endian_mmio = 1; + ehci->big_endian_desc = 1; +#endif + + ret = ehci_setup(hcd); + if (ret) + return ret; + + ehci->need_io_watchdog = 0; + + /* Set burst length to 16 words. */ + ehci_writel(ehci, 0x1010, &ehci->regs->reserved[1]); + + return ret; +} + +const struct hc_driver ehci_sead3_hc_driver = { + .description = hcd_name, + .product_desc = "SEAD-3 EHCI", + .hcd_priv_size = sizeof(struct ehci_hcd), + + /* + * generic hardware linkage + */ + .irq = ehci_irq, + .flags = HCD_MEMORY | HCD_USB2, + + /* + * basic lifecycle operations + * + */ + .reset = ehci_sead3_setup, + .start = ehci_run, + .stop = ehci_stop, + .shutdown = ehci_shutdown, + + /* + * managing i/o requests and associated device resources + */ + .urb_enqueue = ehci_urb_enqueue, + .urb_dequeue = ehci_urb_dequeue, + .endpoint_disable = ehci_endpoint_disable, + .endpoint_reset = ehci_endpoint_reset, + + /* + * scheduling support + */ + .get_frame_number = ehci_get_frame, + + /* + * root hub support + */ + .hub_status_data = ehci_hub_status_data, + .hub_control = ehci_hub_control, + .bus_suspend = ehci_bus_suspend, + .bus_resume = ehci_bus_resume, + .relinquish_port = ehci_relinquish_port, + .port_handed_over = ehci_port_handed_over, + + .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, +}; + +static int ehci_hcd_sead3_drv_probe(struct platform_device *pdev) +{ + struct usb_hcd *hcd; + struct resource *res; + int ret; + + if (usb_disabled()) + return -ENODEV; + + if (pdev->resource[1].flags != IORESOURCE_IRQ) { + pr_debug("resource[1] is not IORESOURCE_IRQ"); + return -ENOMEM; + } + hcd = usb_create_hcd(&ehci_sead3_hc_driver, &pdev->dev, "SEAD-3"); + if (!hcd) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + hcd->rsrc_start = res->start; + hcd->rsrc_len = resource_size(res); + + if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { + pr_debug("request_mem_region failed"); + ret = -EBUSY; + goto err1; + } + + hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); + if (!hcd->regs) { + pr_debug("ioremap failed"); + ret = -ENOMEM; + goto err2; + } + + /* Root hub has integrated TT. */ + hcd->has_tt = 1; + + ret = usb_add_hcd(hcd, pdev->resource[1].start, + IRQF_SHARED); + if (ret == 0) { + platform_set_drvdata(pdev, hcd); + return ret; + } + + iounmap(hcd->regs); +err2: + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); +err1: + usb_put_hcd(hcd); + return ret; +} + +static int ehci_hcd_sead3_drv_remove(struct platform_device *pdev) +{ + struct usb_hcd *hcd = platform_get_drvdata(pdev); + + usb_remove_hcd(hcd); + iounmap(hcd->regs); + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); + usb_put_hcd(hcd); + platform_set_drvdata(pdev, NULL); + + return 0; +} + +#ifdef CONFIG_PM +static int ehci_hcd_sead3_drv_suspend(struct device *dev) +{ + struct usb_hcd *hcd = dev_get_drvdata(dev); + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + unsigned long flags; + int rc = 0; + + if (time_before(jiffies, ehci->next_statechange)) + msleep(20); + + /* Root hub was already suspended. Disable irq emission and + * mark HW unaccessible. The PM and USB cores make sure that + * the root hub is either suspended or stopped. + */ + ehci_prepare_ports_for_controller_suspend(ehci, device_may_wakeup(dev)); + spin_lock_irqsave(&ehci->lock, flags); + ehci_writel(ehci, 0, &ehci->regs->intr_enable); + (void)ehci_readl(ehci, &ehci->regs->intr_enable); + + clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); + spin_unlock_irqrestore(&ehci->lock, flags); + + /* could save FLADJ in case of Vaux power loss + * ... we'd only use it to handle clock skew + */ + + return rc; +} + +static int ehci_hcd_sead3_drv_resume(struct device *dev) +{ + struct usb_hcd *hcd = dev_get_drvdata(dev); + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + + /* maybe restore FLADJ. */ + + if (time_before(jiffies, ehci->next_statechange)) + msleep(100); + + /* Mark hardware accessible again as we are out of D3 state by now */ + set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); + + /* If CF is still set, we maintained PCI Vaux power. + * Just undo the effect of ehci_pci_suspend(). + */ + if (ehci_readl(ehci, &ehci->regs->configured_flag) == FLAG_CF) { + int mask = INTR_MASK; + + ehci_prepare_ports_for_controller_resume(ehci); + if (!hcd->self.root_hub->do_remote_wakeup) + mask &= ~STS_PCD; + ehci_writel(ehci, mask, &ehci->regs->intr_enable); + ehci_readl(ehci, &ehci->regs->intr_enable); + return 0; + } + + ehci_dbg(ehci, "lost power, restarting\n"); + usb_root_hub_lost_power(hcd->self.root_hub); + + /* Else reset, to cope with power loss or flush-to-storage + * style "resume" having let BIOS kick in during reboot. + */ + (void) ehci_halt(ehci); + (void) ehci_reset(ehci); + + /* emptying the schedule aborts any urbs */ + spin_lock_irq(&ehci->lock); + if (ehci->reclaim) + end_unlink_async(ehci); + ehci_work(ehci); + spin_unlock_irq(&ehci->lock); + + ehci_writel(ehci, ehci->command, &ehci->regs->command); + ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag); + ehci_readl(ehci, &ehci->regs->command); /* unblock posted writes */ + + /* here we "know" root ports should always stay powered */ + ehci_port_power(ehci, 1); + + ehci->rh_state = EHCI_RH_SUSPENDED; + + return 0; +} + +static const struct dev_pm_ops sead3_ehci_pmops = { + .suspend = ehci_hcd_sead3_drv_suspend, + .resume = ehci_hcd_sead3_drv_resume, +}; + +#define SEAD3_EHCI_PMOPS (&sead3_ehci_pmops) + +#else +#define SEAD3_EHCI_PMOPS NULL +#endif + +static struct platform_driver ehci_hcd_sead3_driver = { + .probe = ehci_hcd_sead3_drv_probe, + .remove = ehci_hcd_sead3_drv_remove, + .shutdown = usb_hcd_platform_shutdown, + .driver = { + .name = "sead3-ehci", + .owner = THIS_MODULE, + .pm = SEAD3_EHCI_PMOPS, + } +}; + +MODULE_ALIAS("platform:sead3-ehci"); diff --git a/drivers/usb/host/ehci-sh.c b/drivers/usb/host/ehci-sh.c index 9d9cf47d80d..ca819cdd0c5 100644 --- a/drivers/usb/host/ehci-sh.c +++ b/drivers/usb/host/ehci-sh.c @@ -11,6 +11,7 @@ */ #include <linux/platform_device.h> #include <linux/clk.h> +#include <linux/platform_data/ehci-sh.h> struct ehci_sh_priv { struct clk *iclk, *fclk; @@ -100,6 +101,7 @@ static int ehci_hcd_sh_probe(struct platform_device *pdev) const struct hc_driver *driver = &ehci_sh_hc_driver; struct resource *res; struct ehci_sh_priv *priv; + struct ehci_sh_platdata *pdata; struct usb_hcd *hcd; int irq, ret; @@ -124,6 +126,9 @@ static int ehci_hcd_sh_probe(struct platform_device *pdev) goto fail_create_hcd; } + if (pdev->dev.platform_data != NULL) + pdata = pdev->dev.platform_data; + /* initialize hcd */ hcd = usb_create_hcd(&ehci_sh_hc_driver, &pdev->dev, dev_name(&pdev->dev)); @@ -168,6 +173,9 @@ static int ehci_hcd_sh_probe(struct platform_device *pdev) clk_enable(priv->fclk); clk_enable(priv->iclk); + if (pdata && pdata->phy_init) + pdata->phy_init(); + ret = usb_add_hcd(hcd, irq, IRQF_SHARED); if (ret != 0) { dev_err(&pdev->dev, "Failed to add hcd"); diff --git a/drivers/usb/host/ehci-spear.c b/drivers/usb/host/ehci-spear.c index 6e928559169..37ba8c8d2fd 100644 --- a/drivers/usb/host/ehci-spear.c +++ b/drivers/usb/host/ehci-spear.c @@ -13,6 +13,7 @@ #include <linux/clk.h> #include <linux/jiffies.h> +#include <linux/of.h> #include <linux/platform_device.h> #include <linux/pm.h> @@ -25,12 +26,12 @@ struct spear_ehci { static void spear_start_ehci(struct spear_ehci *ehci) { - clk_enable(ehci->clk); + clk_prepare_enable(ehci->clk); } static void spear_stop_ehci(struct spear_ehci *ehci) { - clk_disable(ehci->clk); + clk_disable_unprepare(ehci->clk); } static int ehci_spear_setup(struct usb_hcd *hcd) @@ -168,6 +169,8 @@ static int ehci_spear_drv_resume(struct device *dev) static SIMPLE_DEV_PM_OPS(ehci_spear_pm_ops, ehci_spear_drv_suspend, ehci_spear_drv_resume); +static u64 spear_ehci_dma_mask = DMA_BIT_MASK(32); + static int spear_ehci_hcd_drv_probe(struct platform_device *pdev) { struct usb_hcd *hcd ; @@ -175,12 +178,9 @@ static int spear_ehci_hcd_drv_probe(struct platform_device *pdev) struct resource *res; struct clk *usbh_clk; const struct hc_driver *driver = &ehci_spear_hc_driver; - int *pdata = pdev->dev.platform_data; int irq, retval; char clk_name[20] = "usbh_clk"; - - if (pdata == NULL) - return -EFAULT; + static int instance = -1; if (usb_disabled()) return -ENODEV; @@ -191,8 +191,22 @@ static int spear_ehci_hcd_drv_probe(struct platform_device *pdev) goto fail_irq_get; } - if (*pdata >= 0) - sprintf(clk_name, "usbh.%01d_clk", *pdata); + /* + * Right now device-tree probed devices don't get dma_mask set. + * Since shared usb code relies on it, set it here for now. + * Once we have dma capability bindings this can go away. + */ + if (!pdev->dev.dma_mask) + pdev->dev.dma_mask = &spear_ehci_dma_mask; + + /* + * Increment the device instance, when probing via device-tree + */ + if (pdev->id < 0) + instance++; + else + instance = pdev->id; + sprintf(clk_name, "usbh.%01d_clk", instance); usbh_clk = clk_get(NULL, clk_name); if (IS_ERR(usbh_clk)) { @@ -277,6 +291,11 @@ static int spear_ehci_hcd_drv_remove(struct platform_device *pdev) return 0; } +static struct of_device_id spear_ehci_id_table[] __devinitdata = { + { .compatible = "st,spear600-ehci", }, + { }, +}; + static struct platform_driver spear_ehci_hcd_driver = { .probe = spear_ehci_hcd_drv_probe, .remove = spear_ehci_hcd_drv_remove, @@ -285,6 +304,7 @@ static struct platform_driver spear_ehci_hcd_driver = { .name = "spear-ehci", .bus = &platform_bus_type, .pm = &ehci_spear_pm_ops, + .of_match_table = of_match_ptr(spear_ehci_id_table), } }; diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c index 3de48a2d795..68548236ec4 100644 --- a/drivers/usb/host/ehci-tegra.c +++ b/drivers/usb/host/ehci-tegra.c @@ -24,6 +24,7 @@ #include <linux/gpio.h> #include <linux/of.h> #include <linux/of_gpio.h> +#include <linux/pm_runtime.h> #include <mach/usb_phy.h> #include <mach/iomap.h> @@ -37,9 +38,7 @@ struct tegra_ehci_hcd { struct clk *emc_clk; struct usb_phy *transceiver; int host_resumed; - int bus_suspended; int port_resuming; - int power_down_on_bus_suspend; enum tegra_usb_phy_port_speed port_speed; }; @@ -148,18 +147,7 @@ static int tegra_ehci_hub_control( spin_lock_irqsave(&ehci->lock, flags); - /* - * In ehci_hub_control() for USB_PORT_FEAT_ENABLE clears the other bits - * that are write on clear, by writing back the register read value, so - * USB_PORT_FEAT_ENABLE is handled by masking the set on clear bits - */ - if (typeReq == ClearPortFeature && wValue == USB_PORT_FEAT_ENABLE) { - temp = ehci_readl(ehci, status_reg) & ~PORT_RWC_BITS; - ehci_writel(ehci, temp & ~PORT_PE, status_reg); - goto done; - } - - else if (typeReq == GetPortStatus) { + if (typeReq == GetPortStatus) { temp = ehci_readl(ehci, status_reg); if (tegra->port_resuming && !(temp & PORT_SUSPEND)) { /* Resume completed, re-enable disconnect detection */ @@ -175,7 +163,7 @@ static int tegra_ehci_hub_control( goto done; } - temp &= ~PORT_WKCONN_E; + temp &= ~(PORT_RWC_BITS | PORT_WKCONN_E); temp |= PORT_WKDISC_E | PORT_WKOC_E; ehci_writel(ehci, temp | PORT_SUSPEND, status_reg); @@ -224,6 +212,7 @@ static int tegra_ehci_hub_control( temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS); /* start resume signalling */ ehci_writel(ehci, temp | PORT_RESUME, status_reg); + set_bit(wIndex-1, &ehci->resuming_ports); spin_unlock_irqrestore(&ehci->lock, flags); msleep(20); @@ -236,6 +225,7 @@ static int tegra_ehci_hub_control( pr_err("%s: timeout waiting for SUSPEND\n", __func__); ehci->reset_done[wIndex-1] = 0; + clear_bit(wIndex-1, &ehci->resuming_ports); tegra->port_resuming = 1; goto done; @@ -271,120 +261,6 @@ static void tegra_ehci_restart(struct usb_hcd *hcd) up_write(&ehci_cf_port_reset_rwsem); } -static int tegra_usb_suspend(struct usb_hcd *hcd) -{ - struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller); - struct ehci_regs __iomem *hw = tegra->ehci->regs; - unsigned long flags; - - spin_lock_irqsave(&tegra->ehci->lock, flags); - - tegra->port_speed = (readl(&hw->port_status[0]) >> 26) & 0x3; - ehci_halt(tegra->ehci); - clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); - - spin_unlock_irqrestore(&tegra->ehci->lock, flags); - - tegra_ehci_power_down(hcd); - return 0; -} - -static int tegra_usb_resume(struct usb_hcd *hcd) -{ - struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller); - struct ehci_hcd *ehci = hcd_to_ehci(hcd); - struct ehci_regs __iomem *hw = ehci->regs; - unsigned long val; - - set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); - tegra_ehci_power_up(hcd); - - if (tegra->port_speed > TEGRA_USB_PHY_PORT_SPEED_HIGH) { - /* Wait for the phy to detect new devices - * before we restart the controller */ - msleep(10); - goto restart; - } - - /* Force the phy to keep data lines in suspend state */ - tegra_ehci_phy_restore_start(tegra->phy, tegra->port_speed); - - /* Enable host mode */ - tdi_reset(ehci); - - /* Enable Port Power */ - val = readl(&hw->port_status[0]); - val |= PORT_POWER; - writel(val, &hw->port_status[0]); - udelay(10); - - /* Check if the phy resume from LP0. When the phy resume from LP0 - * USB register will be reset. */ - if (!readl(&hw->async_next)) { - /* Program the field PTC based on the saved speed mode */ - val = readl(&hw->port_status[0]); - val &= ~PORT_TEST(~0); - if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_HIGH) - val |= PORT_TEST_FORCE; - else if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_FULL) - val |= PORT_TEST(6); - else if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_LOW) - val |= PORT_TEST(7); - writel(val, &hw->port_status[0]); - udelay(10); - - /* Disable test mode by setting PTC field to NORMAL_OP */ - val = readl(&hw->port_status[0]); - val &= ~PORT_TEST(~0); - writel(val, &hw->port_status[0]); - udelay(10); - } - - /* Poll until CCS is enabled */ - if (handshake(ehci, &hw->port_status[0], PORT_CONNECT, - PORT_CONNECT, 2000)) { - pr_err("%s: timeout waiting for PORT_CONNECT\n", __func__); - goto restart; - } - - /* Poll until PE is enabled */ - if (handshake(ehci, &hw->port_status[0], PORT_PE, - PORT_PE, 2000)) { - pr_err("%s: timeout waiting for USB_PORTSC1_PE\n", __func__); - goto restart; - } - - /* Clear the PCI status, to avoid an interrupt taken upon resume */ - val = readl(&hw->status); - val |= STS_PCD; - writel(val, &hw->status); - - /* Put controller in suspend mode by writing 1 to SUSP bit of PORTSC */ - val = readl(&hw->port_status[0]); - if ((val & PORT_POWER) && (val & PORT_PE)) { - val |= PORT_SUSPEND; - writel(val, &hw->port_status[0]); - - /* Wait until port suspend completes */ - if (handshake(ehci, &hw->port_status[0], PORT_SUSPEND, - PORT_SUSPEND, 1000)) { - pr_err("%s: timeout waiting for PORT_SUSPEND\n", - __func__); - goto restart; - } - } - - tegra_ehci_phy_restore_end(tegra->phy); - return 0; - -restart: - if (tegra->port_speed <= TEGRA_USB_PHY_PORT_SPEED_HIGH) - tegra_ehci_phy_restore_end(tegra->phy); - - tegra_ehci_restart(hcd); - return 0; -} - static void tegra_ehci_shutdown(struct usb_hcd *hcd) { struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller); @@ -432,56 +308,23 @@ static int tegra_ehci_setup(struct usb_hcd *hcd) return retval; } -#ifdef CONFIG_PM -static int tegra_ehci_bus_suspend(struct usb_hcd *hcd) -{ - struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller); - int error_status = 0; - - error_status = ehci_bus_suspend(hcd); - if (!error_status && tegra->power_down_on_bus_suspend) { - tegra_usb_suspend(hcd); - tegra->bus_suspended = 1; - } - - return error_status; -} - -static int tegra_ehci_bus_resume(struct usb_hcd *hcd) -{ - struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller); - - if (tegra->bus_suspended && tegra->power_down_on_bus_suspend) { - tegra_usb_resume(hcd); - tegra->bus_suspended = 0; - } - - tegra_usb_phy_preresume(tegra->phy); - tegra->port_resuming = 1; - return ehci_bus_resume(hcd); -} -#endif - -struct temp_buffer { +struct dma_aligned_buffer { void *kmalloc_ptr; void *old_xfer_buffer; u8 data[0]; }; -static void free_temp_buffer(struct urb *urb) +static void free_dma_aligned_buffer(struct urb *urb) { - enum dma_data_direction dir; - struct temp_buffer *temp; + struct dma_aligned_buffer *temp; if (!(urb->transfer_flags & URB_ALIGNED_TEMP_BUFFER)) return; - dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE; + temp = container_of(urb->transfer_buffer, + struct dma_aligned_buffer, data); - temp = container_of(urb->transfer_buffer, struct temp_buffer, - data); - - if (dir == DMA_FROM_DEVICE) + if (usb_urb_dir_in(urb)) memcpy(temp->old_xfer_buffer, temp->data, urb->transfer_buffer_length); urb->transfer_buffer = temp->old_xfer_buffer; @@ -490,10 +333,9 @@ static void free_temp_buffer(struct urb *urb) urb->transfer_flags &= ~URB_ALIGNED_TEMP_BUFFER; } -static int alloc_temp_buffer(struct urb *urb, gfp_t mem_flags) +static int alloc_dma_aligned_buffer(struct urb *urb, gfp_t mem_flags) { - enum dma_data_direction dir; - struct temp_buffer *temp, *kmalloc_ptr; + struct dma_aligned_buffer *temp, *kmalloc_ptr; size_t kmalloc_size; if (urb->num_sgs || urb->sg || @@ -501,22 +343,19 @@ static int alloc_temp_buffer(struct urb *urb, gfp_t mem_flags) !((uintptr_t)urb->transfer_buffer & (TEGRA_USB_DMA_ALIGN - 1))) return 0; - dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE; - /* Allocate a buffer with enough padding for alignment */ kmalloc_size = urb->transfer_buffer_length + - sizeof(struct temp_buffer) + TEGRA_USB_DMA_ALIGN - 1; + sizeof(struct dma_aligned_buffer) + TEGRA_USB_DMA_ALIGN - 1; kmalloc_ptr = kmalloc(kmalloc_size, mem_flags); if (!kmalloc_ptr) return -ENOMEM; - /* Position our struct temp_buffer such that data is aligned */ + /* Position our struct dma_aligned_buffer such that data is aligned */ temp = PTR_ALIGN(kmalloc_ptr + 1, TEGRA_USB_DMA_ALIGN) - 1; - temp->kmalloc_ptr = kmalloc_ptr; temp->old_xfer_buffer = urb->transfer_buffer; - if (dir == DMA_TO_DEVICE) + if (usb_urb_dir_out(urb)) memcpy(temp->data, urb->transfer_buffer, urb->transfer_buffer_length); urb->transfer_buffer = temp->data; @@ -531,13 +370,13 @@ static int tegra_ehci_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb, { int ret; - ret = alloc_temp_buffer(urb, mem_flags); + ret = alloc_dma_aligned_buffer(urb, mem_flags); if (ret) return ret; ret = usb_hcd_map_urb_for_dma(hcd, urb, mem_flags); if (ret) - free_temp_buffer(urb); + free_dma_aligned_buffer(urb); return ret; } @@ -545,49 +384,51 @@ static int tegra_ehci_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb, static void tegra_ehci_unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb) { usb_hcd_unmap_urb_for_dma(hcd, urb); - free_temp_buffer(urb); + free_dma_aligned_buffer(urb); } static const struct hc_driver tegra_ehci_hc_driver = { .description = hcd_name, .product_desc = "Tegra EHCI Host Controller", .hcd_priv_size = sizeof(struct ehci_hcd), - .flags = HCD_USB2 | HCD_MEMORY, - .reset = tegra_ehci_setup, + /* standard ehci functions */ .irq = ehci_irq, - .start = ehci_run, .stop = ehci_stop, - .shutdown = tegra_ehci_shutdown, .urb_enqueue = ehci_urb_enqueue, .urb_dequeue = ehci_urb_dequeue, - .map_urb_for_dma = tegra_ehci_map_urb_for_dma, - .unmap_urb_for_dma = tegra_ehci_unmap_urb_for_dma, .endpoint_disable = ehci_endpoint_disable, .endpoint_reset = ehci_endpoint_reset, .get_frame_number = ehci_get_frame, .hub_status_data = ehci_hub_status_data, - .hub_control = tegra_ehci_hub_control, .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, -#ifdef CONFIG_PM - .bus_suspend = tegra_ehci_bus_suspend, - .bus_resume = tegra_ehci_bus_resume, -#endif .relinquish_port = ehci_relinquish_port, .port_handed_over = ehci_port_handed_over, + + /* modified ehci functions for tegra */ + .reset = tegra_ehci_setup, + .shutdown = tegra_ehci_shutdown, + .map_urb_for_dma = tegra_ehci_map_urb_for_dma, + .unmap_urb_for_dma = tegra_ehci_unmap_urb_for_dma, + .hub_control = tegra_ehci_hub_control, +#ifdef CONFIG_PM + .bus_suspend = ehci_bus_suspend, + .bus_resume = ehci_bus_resume, +#endif }; -static int setup_vbus_gpio(struct platform_device *pdev) +static int setup_vbus_gpio(struct platform_device *pdev, + struct tegra_ehci_platform_data *pdata) { int err = 0; int gpio; - if (!pdev->dev.of_node) - return 0; - - gpio = of_get_named_gpio(pdev->dev.of_node, "nvidia,vbus-gpio", 0); + gpio = pdata->vbus_gpio; + if (!gpio_is_valid(gpio)) + gpio = of_get_named_gpio(pdev->dev.of_node, + "nvidia,vbus-gpio", 0); if (!gpio_is_valid(gpio)) return 0; @@ -601,11 +442,187 @@ static int setup_vbus_gpio(struct platform_device *pdev) dev_err(&pdev->dev, "can't enable vbus\n"); return err; } - gpio_set_value(gpio, 1); return err; } +#ifdef CONFIG_PM + +static int controller_suspend(struct device *dev) +{ + struct tegra_ehci_hcd *tegra = + platform_get_drvdata(to_platform_device(dev)); + struct ehci_hcd *ehci = tegra->ehci; + struct usb_hcd *hcd = ehci_to_hcd(ehci); + struct ehci_regs __iomem *hw = ehci->regs; + unsigned long flags; + + if (time_before(jiffies, ehci->next_statechange)) + msleep(10); + + spin_lock_irqsave(&ehci->lock, flags); + + tegra->port_speed = (readl(&hw->port_status[0]) >> 26) & 0x3; + ehci_halt(ehci); + clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); + + spin_unlock_irqrestore(&ehci->lock, flags); + + tegra_ehci_power_down(hcd); + return 0; +} + +static int controller_resume(struct device *dev) +{ + struct tegra_ehci_hcd *tegra = + platform_get_drvdata(to_platform_device(dev)); + struct ehci_hcd *ehci = tegra->ehci; + struct usb_hcd *hcd = ehci_to_hcd(ehci); + struct ehci_regs __iomem *hw = ehci->regs; + unsigned long val; + + set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); + tegra_ehci_power_up(hcd); + + if (tegra->port_speed > TEGRA_USB_PHY_PORT_SPEED_HIGH) { + /* Wait for the phy to detect new devices + * before we restart the controller */ + msleep(10); + goto restart; + } + + /* Force the phy to keep data lines in suspend state */ + tegra_ehci_phy_restore_start(tegra->phy, tegra->port_speed); + + /* Enable host mode */ + tdi_reset(ehci); + + /* Enable Port Power */ + val = readl(&hw->port_status[0]); + val |= PORT_POWER; + writel(val, &hw->port_status[0]); + udelay(10); + + /* Check if the phy resume from LP0. When the phy resume from LP0 + * USB register will be reset. */ + if (!readl(&hw->async_next)) { + /* Program the field PTC based on the saved speed mode */ + val = readl(&hw->port_status[0]); + val &= ~PORT_TEST(~0); + if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_HIGH) + val |= PORT_TEST_FORCE; + else if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_FULL) + val |= PORT_TEST(6); + else if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_LOW) + val |= PORT_TEST(7); + writel(val, &hw->port_status[0]); + udelay(10); + + /* Disable test mode by setting PTC field to NORMAL_OP */ + val = readl(&hw->port_status[0]); + val &= ~PORT_TEST(~0); + writel(val, &hw->port_status[0]); + udelay(10); + } + + /* Poll until CCS is enabled */ + if (handshake(ehci, &hw->port_status[0], PORT_CONNECT, + PORT_CONNECT, 2000)) { + pr_err("%s: timeout waiting for PORT_CONNECT\n", __func__); + goto restart; + } + + /* Poll until PE is enabled */ + if (handshake(ehci, &hw->port_status[0], PORT_PE, + PORT_PE, 2000)) { + pr_err("%s: timeout waiting for USB_PORTSC1_PE\n", __func__); + goto restart; + } + + /* Clear the PCI status, to avoid an interrupt taken upon resume */ + val = readl(&hw->status); + val |= STS_PCD; + writel(val, &hw->status); + + /* Put controller in suspend mode by writing 1 to SUSP bit of PORTSC */ + val = readl(&hw->port_status[0]); + if ((val & PORT_POWER) && (val & PORT_PE)) { + val |= PORT_SUSPEND; + writel(val, &hw->port_status[0]); + + /* Wait until port suspend completes */ + if (handshake(ehci, &hw->port_status[0], PORT_SUSPEND, + PORT_SUSPEND, 1000)) { + pr_err("%s: timeout waiting for PORT_SUSPEND\n", + __func__); + goto restart; + } + } + + tegra_ehci_phy_restore_end(tegra->phy); + goto done; + + restart: + if (tegra->port_speed <= TEGRA_USB_PHY_PORT_SPEED_HIGH) + tegra_ehci_phy_restore_end(tegra->phy); + + tegra_ehci_restart(hcd); + + done: + tegra_usb_phy_preresume(tegra->phy); + tegra->port_resuming = 1; + return 0; +} + +static int tegra_ehci_suspend(struct device *dev) +{ + struct tegra_ehci_hcd *tegra = + platform_get_drvdata(to_platform_device(dev)); + struct usb_hcd *hcd = ehci_to_hcd(tegra->ehci); + int rc = 0; + + /* + * When system sleep is supported and USB controller wakeup is + * implemented: If the controller is runtime-suspended and the + * wakeup setting needs to be changed, call pm_runtime_resume(). + */ + if (HCD_HW_ACCESSIBLE(hcd)) + rc = controller_suspend(dev); + return rc; +} + +static int tegra_ehci_resume(struct device *dev) +{ + int rc; + + rc = controller_resume(dev); + if (rc == 0) { + pm_runtime_disable(dev); + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + } + return rc; +} + +static int tegra_ehci_runtime_suspend(struct device *dev) +{ + return controller_suspend(dev); +} + +static int tegra_ehci_runtime_resume(struct device *dev) +{ + return controller_resume(dev); +} + +static const struct dev_pm_ops tegra_ehci_pm_ops = { + .suspend = tegra_ehci_suspend, + .resume = tegra_ehci_resume, + .runtime_suspend = tegra_ehci_runtime_suspend, + .runtime_resume = tegra_ehci_runtime_resume, +}; + +#endif + static u64 tegra_ehci_dma_mask = DMA_BIT_MASK(32); static int tegra_ehci_probe(struct platform_device *pdev) @@ -631,7 +648,7 @@ static int tegra_ehci_probe(struct platform_device *pdev) if (!pdev->dev.dma_mask) pdev->dev.dma_mask = &tegra_ehci_dma_mask; - setup_vbus_gpio(pdev); + setup_vbus_gpio(pdev, pdata); tegra = kzalloc(sizeof(struct tegra_ehci_hcd), GFP_KERNEL); if (!tegra) @@ -705,8 +722,9 @@ static int tegra_ehci_probe(struct platform_device *pdev) } } - tegra->phy = tegra_usb_phy_open(instance, hcd->regs, pdata->phy_config, - TEGRA_USB_PHY_MODE_HOST); + tegra->phy = tegra_usb_phy_open(&pdev->dev, instance, hcd->regs, + pdata->phy_config, + TEGRA_USB_PHY_MODE_HOST); if (IS_ERR(tegra->phy)) { dev_err(&pdev->dev, "Failed to open USB phy\n"); err = -ENXIO; @@ -720,7 +738,6 @@ static int tegra_ehci_probe(struct platform_device *pdev) } tegra->host_resumed = 1; - tegra->power_down_on_bus_suspend = pdata->power_down_on_bus_suspend; tegra->ehci = hcd_to_ehci(hcd); irq = platform_get_irq(pdev, 0); @@ -729,7 +746,6 @@ static int tegra_ehci_probe(struct platform_device *pdev) err = -ENODEV; goto fail; } - set_irq_flags(irq, IRQF_VALID); #ifdef CONFIG_USB_OTG_UTILS if (pdata->operating_mode == TEGRA_USB_OTG) { @@ -745,6 +761,14 @@ static int tegra_ehci_probe(struct platform_device *pdev) goto fail; } + pm_runtime_set_active(&pdev->dev); + pm_runtime_get_noresume(&pdev->dev); + + /* Don't skip the pm_runtime_forbid call if wakeup isn't working */ + /* if (!pdata->power_down_on_bus_suspend) */ + pm_runtime_forbid(&pdev->dev); + pm_runtime_enable(&pdev->dev); + pm_runtime_put_sync(&pdev->dev); return err; fail: @@ -771,33 +795,6 @@ fail_hcd: return err; } -#ifdef CONFIG_PM -static int tegra_ehci_resume(struct platform_device *pdev) -{ - struct tegra_ehci_hcd *tegra = platform_get_drvdata(pdev); - struct usb_hcd *hcd = ehci_to_hcd(tegra->ehci); - - if (tegra->bus_suspended) - return 0; - - return tegra_usb_resume(hcd); -} - -static int tegra_ehci_suspend(struct platform_device *pdev, pm_message_t state) -{ - struct tegra_ehci_hcd *tegra = platform_get_drvdata(pdev); - struct usb_hcd *hcd = ehci_to_hcd(tegra->ehci); - - if (tegra->bus_suspended) - return 0; - - if (time_before(jiffies, tegra->ehci->next_statechange)) - msleep(10); - - return tegra_usb_suspend(hcd); -} -#endif - static int tegra_ehci_remove(struct platform_device *pdev) { struct tegra_ehci_hcd *tegra = platform_get_drvdata(pdev); @@ -806,6 +803,10 @@ static int tegra_ehci_remove(struct platform_device *pdev) if (tegra == NULL || hcd == NULL) return -EINVAL; + pm_runtime_get_sync(&pdev->dev); + pm_runtime_disable(&pdev->dev); + pm_runtime_put_noidle(&pdev->dev); + #ifdef CONFIG_USB_OTG_UTILS if (tegra->transceiver) { otg_set_host(tegra->transceiver->otg, NULL); @@ -846,13 +847,12 @@ static struct of_device_id tegra_ehci_of_match[] __devinitdata = { static struct platform_driver tegra_ehci_driver = { .probe = tegra_ehci_probe, .remove = tegra_ehci_remove, -#ifdef CONFIG_PM - .suspend = tegra_ehci_suspend, - .resume = tegra_ehci_resume, -#endif .shutdown = tegra_ehci_hcd_shutdown, .driver = { .name = "tegra-ehci", .of_match_table = tegra_ehci_of_match, +#ifdef CONFIG_PM + .pm = &tegra_ehci_pm_ops, +#endif } }; diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index 8f9acbc96fd..2694ed6558d 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -117,6 +117,8 @@ struct ehci_hcd { /* one per controller */ the change-suspend feature turned on */ unsigned long suspended_ports; /* which ports are suspended */ + unsigned long resuming_ports; /* which ports have + started to resume */ /* per-HC memory pools (could be per-bus, but ...) */ struct dma_pool *qh_pool; /* qh per active urb */ diff --git a/drivers/usb/host/fhci-tds.c b/drivers/usb/host/fhci-tds.c index 0ea577bfca2..c5ed8819929 100644 --- a/drivers/usb/host/fhci-tds.c +++ b/drivers/usb/host/fhci-tds.c @@ -155,7 +155,7 @@ u32 fhci_create_ep(struct fhci_usb *usb, enum fhci_mem_alloc data_mem, struct endpoint *ep; struct usb_td __iomem *td; unsigned long ep_offset; - char *err_for = "enpoint PRAM"; + char *err_for = "endpoint PRAM"; int ep_mem_size; u32 i; diff --git a/drivers/usb/host/fsl-mph-dr-of.c b/drivers/usb/host/fsl-mph-dr-of.c index ab333ac6071..22ff6b3a676 100644 --- a/drivers/usb/host/fsl-mph-dr-of.c +++ b/drivers/usb/host/fsl-mph-dr-of.c @@ -119,6 +119,39 @@ error: static const struct of_device_id fsl_usb2_mph_dr_of_match[]; +static int usb_get_ver_info(struct device_node *np) +{ + int ver = -1; + + /* + * returns 1 for usb controller version 1.6 + * returns 2 for usb controller version 2.2 + * returns 0 otherwise + */ + if (of_device_is_compatible(np, "fsl-usb2-dr")) { + if (of_device_is_compatible(np, "fsl-usb2-dr-v1.6")) + ver = FSL_USB_VER_1_6; + else if (of_device_is_compatible(np, "fsl-usb2-dr-v2.2")) + ver = FSL_USB_VER_2_2; + else /* for previous controller versions */ + ver = FSL_USB_VER_OLD; + + if (ver > -1) + return ver; + } + + if (of_device_is_compatible(np, "fsl-usb2-mph")) { + if (of_device_is_compatible(np, "fsl-usb2-mph-v1.6")) + ver = FSL_USB_VER_1_6; + else if (of_device_is_compatible(np, "fsl-usb2-mph-v2.2")) + ver = FSL_USB_VER_2_2; + else /* for previous controller versions */ + ver = FSL_USB_VER_OLD; + } + + return ver; +} + static int __devinit fsl_usb2_mph_dr_of_probe(struct platform_device *ofdev) { struct device_node *np = ofdev->dev.of_node; @@ -166,6 +199,14 @@ static int __devinit fsl_usb2_mph_dr_of_probe(struct platform_device *ofdev) prop = of_get_property(np, "phy_type", NULL); pdata->phy_mode = determine_usb_phy(prop); + pdata->controller_ver = usb_get_ver_info(np); + + if (pdata->have_sysif_regs) { + if (pdata->controller_ver < 0) { + dev_warn(&ofdev->dev, "Could not get controller version\n"); + return -ENODEV; + } + } for (i = 0; i < ARRAY_SIZE(dev_data->drivers); i++) { if (!dev_data->drivers[i]) diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c index fc72d44bf78..a35bbddf896 100644 --- a/drivers/usb/host/isp1760-hcd.c +++ b/drivers/usb/host/isp1760-hcd.c @@ -1562,11 +1562,14 @@ static int isp1760_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) { retval = -ESHUTDOWN; + qtd_list_free(&new_qtds); goto out; } retval = usb_hcd_link_urb_to_ep(hcd, urb); - if (retval) + if (retval) { + qtd_list_free(&new_qtds); goto out; + } qh = urb->ep->hcpriv; if (qh) { @@ -1584,6 +1587,7 @@ static int isp1760_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, if (!qh) { retval = -ENOMEM; usb_hcd_unlink_urb_from_ep(hcd, urb); + qtd_list_free(&new_qtds); goto out; } list_add_tail(&qh->qh_list, ep_queue); @@ -1683,6 +1687,7 @@ static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, list_for_each_entry(qtd, &qh->qtd_list, qtd_list) if (qtd->urb == urb) { dequeue_urb_from_qtd(hcd, qh, qtd); + list_move(&qtd->qtd_list, &qh->qtd_list); break; } @@ -2176,7 +2181,7 @@ static const struct hc_driver isp1760_hc_driver = { int __init init_kmem_once(void) { - urb_listitem_cachep = kmem_cache_create("isp1760 urb_listitem", + urb_listitem_cachep = kmem_cache_create("isp1760_urb_listitem", sizeof(struct urb_listitem), 0, SLAB_TEMPORARY | SLAB_MEM_SPREAD, NULL); diff --git a/drivers/usb/host/isp1760-if.c b/drivers/usb/host/isp1760-if.c index 4592dc17a9f..fff114fd546 100644 --- a/drivers/usb/host/isp1760-if.c +++ b/drivers/usb/host/isp1760-if.c @@ -398,6 +398,9 @@ static int __devinit isp1760_plat_probe(struct platform_device *pdev) hcd = isp1760_register(mem_res->start, mem_size, irq_res->start, irqflags, -ENOENT, &pdev->dev, dev_name(&pdev->dev), devflags); + + dev_set_drvdata(&pdev->dev, hcd); + if (IS_ERR(hcd)) { pr_warning("isp1760: Failed to register the HCD device\n"); ret = -ENODEV; @@ -417,11 +420,16 @@ static int __devexit isp1760_plat_remove(struct platform_device *pdev) { struct resource *mem_res; resource_size_t mem_size; + struct usb_hcd *hcd = dev_get_drvdata(&pdev->dev); + + usb_remove_hcd(hcd); mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); mem_size = resource_size(mem_res); release_mem_region(mem_res->start, mem_size); + usb_put_hcd(hcd); + return 0; } diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index 09f597ad6e0..a665b3eaa74 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -94,7 +94,7 @@ static void at91_stop_hc(struct platform_device *pdev) /*-------------------------------------------------------------------------*/ -static void usb_hcd_at91_remove (struct usb_hcd *, struct platform_device *); +static void __devexit usb_hcd_at91_remove (struct usb_hcd *, struct platform_device *); /* configure so an HC device and id are always provided */ /* always called with process context; sleeping is OK */ @@ -108,7 +108,7 @@ static void usb_hcd_at91_remove (struct usb_hcd *, struct platform_device *); * then invokes the start() method for the HCD associated with it * through the hotplug entry's driver_data. */ -static int usb_hcd_at91_probe(const struct hc_driver *driver, +static int __devinit usb_hcd_at91_probe(const struct hc_driver *driver, struct platform_device *pdev) { int retval; @@ -129,7 +129,7 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver, if (!hcd) return -ENOMEM; hcd->rsrc_start = pdev->resource[0].start; - hcd->rsrc_len = pdev->resource[0].end - pdev->resource[0].start + 1; + hcd->rsrc_len = resource_size(&pdev->resource[0]); if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { pr_debug("request_mem_region failed\n"); @@ -203,7 +203,7 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver, * context, "rmmod" or something similar. * */ -static void usb_hcd_at91_remove(struct usb_hcd *hcd, +static void __devexit usb_hcd_at91_remove(struct usb_hcd *hcd, struct platform_device *pdev) { usb_remove_hcd(hcd); @@ -223,7 +223,7 @@ static void usb_hcd_at91_remove(struct usb_hcd *hcd, /*-------------------------------------------------------------------------*/ static int __devinit -ohci_at91_start (struct usb_hcd *hcd) +ohci_at91_reset (struct usb_hcd *hcd) { struct at91_usbh_data *board = hcd->self.controller->platform_data; struct ohci_hcd *ohci = hcd_to_ohci (hcd); @@ -233,9 +233,18 @@ ohci_at91_start (struct usb_hcd *hcd) return ret; ohci->num_ports = board->ports; + return 0; +} + +static int __devinit +ohci_at91_start (struct usb_hcd *hcd) +{ + struct ohci_hcd *ohci = hcd_to_ohci (hcd); + int ret; if ((ret = ohci_run(ohci)) < 0) { - err("can't start %s", hcd->self.bus_name); + dev_err(hcd->self.controller, "can't start %s\n", + hcd->self.bus_name); ohci_stop(hcd); return ret; } @@ -418,6 +427,7 @@ static const struct hc_driver ohci_at91_hc_driver = { /* * basic lifecycle operations */ + .reset = ohci_at91_reset, .start = ohci_at91_start, .stop = ohci_stop, .shutdown = ohci_shutdown, @@ -545,7 +555,7 @@ static int __devinit ohci_at91_of_init(struct platform_device *pdev) /*-------------------------------------------------------------------------*/ -static int ohci_hcd_at91_drv_probe(struct platform_device *pdev) +static int __devinit ohci_hcd_at91_drv_probe(struct platform_device *pdev) { struct at91_usbh_data *pdata; int i; @@ -620,7 +630,7 @@ static int ohci_hcd_at91_drv_probe(struct platform_device *pdev) return usb_hcd_at91_probe(&ohci_at91_hc_driver, pdev); } -static int ohci_hcd_at91_drv_remove(struct platform_device *pdev) +static int __devexit ohci_hcd_at91_drv_remove(struct platform_device *pdev) { struct at91_usbh_data *pdata = pdev->dev.platform_data; int i; @@ -696,7 +706,7 @@ MODULE_ALIAS("platform:at91_ohci"); static struct platform_driver ohci_hcd_at91_driver = { .probe = ohci_hcd_at91_drv_probe, - .remove = ohci_hcd_at91_drv_remove, + .remove = __devexit_p(ohci_hcd_at91_drv_remove), .shutdown = usb_hcd_platform_shutdown, .suspend = ohci_hcd_at91_drv_suspend, .resume = ohci_hcd_at91_drv_resume, diff --git a/drivers/usb/host/ohci-au1xxx.c b/drivers/usb/host/ohci-au1xxx.c index 4ea63b2cac4..c611699b4aa 100644 --- a/drivers/usb/host/ohci-au1xxx.c +++ b/drivers/usb/host/ohci-au1xxx.c @@ -37,7 +37,8 @@ static int __devinit ohci_au1xxx_start(struct usb_hcd *hcd) return ret; if ((ret = ohci_run(ohci)) < 0) { - err ("can't start %s", hcd->self.bus_name); + dev_err(hcd->self.controller, "can't start %s", + hcd->self.bus_name); ohci_stop(hcd); return ret; } diff --git a/drivers/usb/host/ohci-cns3xxx.c b/drivers/usb/host/ohci-cns3xxx.c index 5a00a1e1c6c..2c9f233047b 100644 --- a/drivers/usb/host/ohci-cns3xxx.c +++ b/drivers/usb/host/ohci-cns3xxx.c @@ -41,7 +41,8 @@ cns3xxx_ohci_start(struct usb_hcd *hcd) ret = ohci_run(ohci); if (ret < 0) { - err("can't start %s", hcd->self.bus_name); + dev_err(hcd->self.controller, "can't start %s\n", + hcd->self.bus_name); ohci_stop(hcd); return ret; } diff --git a/drivers/usb/host/ohci-da8xx.c b/drivers/usb/host/ohci-da8xx.c index 843509778a3..269b1e0f769 100644 --- a/drivers/usb/host/ohci-da8xx.c +++ b/drivers/usb/host/ohci-da8xx.c @@ -454,3 +454,5 @@ static struct platform_driver ohci_hcd_da8xx_driver = { .name = "ohci", }, }; + +MODULE_ALIAS("platform:ohci"); diff --git a/drivers/usb/host/ohci-dbg.c b/drivers/usb/host/ohci-dbg.c index e4bcb62b930..31b81f9eacd 100644 --- a/drivers/usb/host/ohci-dbg.c +++ b/drivers/usb/host/ohci-dbg.c @@ -29,14 +29,14 @@ urb_print(struct urb * urb, char * str, int small, int status) unsigned int pipe= urb->pipe; if (!urb->dev || !urb->dev->bus) { - dbg("%s URB: no dev", str); + printk(KERN_DEBUG "%s URB: no dev\n", str); return; } #ifndef OHCI_VERBOSE_DEBUG if (status != 0) #endif - dbg("%s %p dev=%d ep=%d%s-%s flags=%x len=%d/%d stat=%d", + printk(KERN_DEBUG "%s %p dev=%d ep=%d%s-%s flags=%x len=%d/%d stat=%d\n", str, urb, usb_pipedevice (pipe), diff --git a/drivers/usb/host/ohci-ep93xx.c b/drivers/usb/host/ohci-ep93xx.c index 3d63574d2c7..dbfbd1dfd2e 100644 --- a/drivers/usb/host/ohci-ep93xx.c +++ b/drivers/usb/host/ohci-ep93xx.c @@ -47,7 +47,7 @@ static int usb_hcd_ep93xx_probe(const struct hc_driver *driver, struct usb_hcd *hcd; if (pdev->resource[1].flags != IORESOURCE_IRQ) { - dbg("resource[1] is not IORESOURCE_IRQ"); + dev_dbg(&pdev->dev, "resource[1] is not IORESOURCE_IRQ\n"); return -ENOMEM; } @@ -65,14 +65,14 @@ static int usb_hcd_ep93xx_probe(const struct hc_driver *driver, hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); if (hcd->regs == NULL) { - dbg("ioremap failed"); + dev_dbg(&pdev->dev, "ioremap failed\n"); retval = -ENOMEM; goto err2; } usb_host_clock = clk_get(&pdev->dev, NULL); if (IS_ERR(usb_host_clock)) { - dbg("clk_get failed"); + dev_dbg(&pdev->dev, "clk_get failed\n"); retval = PTR_ERR(usb_host_clock); goto err3; } @@ -116,7 +116,8 @@ static int __devinit ohci_ep93xx_start(struct usb_hcd *hcd) return ret; if ((ret = ohci_run(ohci)) < 0) { - err("can't start %s", hcd->self.bus_name); + dev_err(hcd->self.controller, "can't start %s\n", + hcd->self.bus_name); ohci_stop(hcd); return ret; } diff --git a/drivers/usb/host/ohci-exynos.c b/drivers/usb/host/ohci-exynos.c index 37bb20ebb6f..2909621ea19 100644 --- a/drivers/usb/host/ohci-exynos.c +++ b/drivers/usb/host/ohci-exynos.c @@ -35,7 +35,8 @@ static int ohci_exynos_start(struct usb_hcd *hcd) ret = ohci_run(ohci); if (ret < 0) { - err("can't start %s", hcd->self.bus_name); + dev_err(hcd->self.controller, "can't start %s\n", + hcd->self.bus_name); ohci_stop(hcd); return ret; } diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 235171f2946..e0adf5c0cf5 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -1080,11 +1080,6 @@ MODULE_LICENSE ("GPL"); #define PS3_SYSTEM_BUS_DRIVER ps3_ohci_driver #endif -#ifdef CONFIG_USB_OHCI_HCD_SSB -#include "ohci-ssb.c" -#define SSB_OHCI_DRIVER ssb_ohci_driver -#endif - #ifdef CONFIG_MFD_SM501 #include "ohci-sm501.c" #define SM501_OHCI_DRIVER ohci_hcd_sm501_driver @@ -1128,8 +1123,7 @@ MODULE_LICENSE ("GPL"); !defined(SA1111_DRIVER) && \ !defined(PS3_SYSTEM_BUS_DRIVER) && \ !defined(SM501_OHCI_DRIVER) && \ - !defined(TMIO_OHCI_DRIVER) && \ - !defined(SSB_OHCI_DRIVER) + !defined(TMIO_OHCI_DRIVER) #error "missing bus glue for ohci-hcd" #endif @@ -1195,12 +1189,6 @@ static int __init ohci_hcd_mod_init(void) goto error_pci; #endif -#ifdef SSB_OHCI_DRIVER - retval = ssb_driver_register(&SSB_OHCI_DRIVER); - if (retval) - goto error_ssb; -#endif - #ifdef SM501_OHCI_DRIVER retval = platform_driver_register(&SM501_OHCI_DRIVER); if (retval < 0) @@ -1224,10 +1212,6 @@ static int __init ohci_hcd_mod_init(void) platform_driver_unregister(&SM501_OHCI_DRIVER); error_sm501: #endif -#ifdef SSB_OHCI_DRIVER - ssb_driver_unregister(&SSB_OHCI_DRIVER); - error_ssb: -#endif #ifdef PCI_DRIVER pci_unregister_driver(&PCI_DRIVER); error_pci: @@ -1275,9 +1259,6 @@ static void __exit ohci_hcd_mod_exit(void) #ifdef SM501_OHCI_DRIVER platform_driver_unregister(&SM501_OHCI_DRIVER); #endif -#ifdef SSB_OHCI_DRIVER - ssb_driver_unregister(&SSB_OHCI_DRIVER); -#endif #ifdef PCI_DRIVER pci_unregister_driver(&PCI_DRIVER); #endif diff --git a/drivers/usb/host/ohci-nxp.c b/drivers/usb/host/ohci-nxp.c index 6618de1d881..1e364ec962f 100644 --- a/drivers/usb/host/ohci-nxp.c +++ b/drivers/usb/host/ohci-nxp.c @@ -22,6 +22,8 @@ #include <linux/clk.h> #include <linux/platform_device.h> #include <linux/i2c.h> +#include <linux/of.h> +#include <linux/usb/isp1301.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -29,7 +31,6 @@ #include <mach/platform.h> #include <mach/irqs.h> -#include <asm/gpio.h> #define USB_CONFIG_BASE 0x31020000 #define PWRMAN_BASE 0x40004000 @@ -38,7 +39,9 @@ /* USB_CTRL bit defines */ #define USB_SLAVE_HCLK_EN (1 << 24) +#define USB_DEV_NEED_CLK_EN (1 << 22) #define USB_HOST_NEED_CLK_EN (1 << 21) +#define PAD_CONTROL_LAST_DRIVEN (1 << 19) #define USB_OTG_CLK_CTRL IO_ADDRESS(USB_CONFIG_BASE + 0xFF4) #define USB_OTG_CLK_STAT IO_ADDRESS(USB_CONFIG_BASE + 0xFF8) @@ -56,54 +59,6 @@ #define TRANSPARENT_I2C_EN (1 << 7) #define HOST_EN (1 << 0) -/* ISP1301 USB transceiver I2C registers */ -#define ISP1301_MODE_CONTROL_1 0x04 /* u8 read, set, +1 clear */ - -#define MC1_SPEED_REG (1 << 0) -#define MC1_SUSPEND_REG (1 << 1) -#define MC1_DAT_SE0 (1 << 2) -#define MC1_TRANSPARENT (1 << 3) -#define MC1_BDIS_ACON_EN (1 << 4) -#define MC1_OE_INT_EN (1 << 5) -#define MC1_UART_EN (1 << 6) -#define MC1_MASK 0x7f - -#define ISP1301_MODE_CONTROL_2 0x12 /* u8 read, set, +1 clear */ - -#define MC2_GLOBAL_PWR_DN (1 << 0) -#define MC2_SPD_SUSP_CTRL (1 << 1) -#define MC2_BI_DI (1 << 2) -#define MC2_TRANSP_BDIR0 (1 << 3) -#define MC2_TRANSP_BDIR1 (1 << 4) -#define MC2_AUDIO_EN (1 << 5) -#define MC2_PSW_EN (1 << 6) -#define MC2_EN2V7 (1 << 7) - -#define ISP1301_OTG_CONTROL_1 0x06 /* u8 read, set, +1 clear */ -# define OTG1_DP_PULLUP (1 << 0) -# define OTG1_DM_PULLUP (1 << 1) -# define OTG1_DP_PULLDOWN (1 << 2) -# define OTG1_DM_PULLDOWN (1 << 3) -# define OTG1_ID_PULLDOWN (1 << 4) -# define OTG1_VBUS_DRV (1 << 5) -# define OTG1_VBUS_DISCHRG (1 << 6) -# define OTG1_VBUS_CHRG (1 << 7) -#define ISP1301_OTG_STATUS 0x10 /* u8 readonly */ -# define OTG_B_SESS_END (1 << 6) -# define OTG_B_SESS_VLD (1 << 7) - -#define ISP1301_I2C_ADDR 0x2C - -#define ISP1301_I2C_MODE_CONTROL_1 0x4 -#define ISP1301_I2C_MODE_CONTROL_2 0x12 -#define ISP1301_I2C_OTG_CONTROL_1 0x6 -#define ISP1301_I2C_OTG_CONTROL_2 0x10 -#define ISP1301_I2C_INTERRUPT_SOURCE 0x8 -#define ISP1301_I2C_INTERRUPT_LATCH 0xA -#define ISP1301_I2C_INTERRUPT_FALLING 0xC -#define ISP1301_I2C_INTERRUPT_RISING 0xE -#define ISP1301_I2C_REG_CLEAR_ADDR 1 - /* On LPC32xx, those are undefined */ #ifndef start_int_set_falling_edge #define start_int_set_falling_edge(irq) @@ -113,42 +68,12 @@ #define start_int_umask(irq) #endif -static struct i2c_driver isp1301_driver; static struct i2c_client *isp1301_i2c_client; extern int usb_disabled(void); -extern int ocpi_enable(void); static struct clk *usb_clk; -static const unsigned short normal_i2c[] = - { ISP1301_I2C_ADDR, ISP1301_I2C_ADDR + 1, I2C_CLIENT_END }; - -static int isp1301_probe(struct i2c_client *client, - const struct i2c_device_id *id) -{ - return 0; -} - -static int isp1301_remove(struct i2c_client *client) -{ - return 0; -} - -static const struct i2c_device_id isp1301_id[] = { - { "isp1301_nxp", 0 }, - { } -}; - -static struct i2c_driver isp1301_driver = { - .driver = { - .name = "isp1301_nxp", - }, - .probe = isp1301_probe, - .remove = isp1301_remove, - .id_table = isp1301_id, -}; - static void isp1301_configure_pnx4008(void) { /* PNX4008 only supports DAT_SE0 USB mode */ @@ -220,7 +145,7 @@ static void isp1301_configure_lpc32xx(void) ISP1301_I2C_INTERRUPT_RISING | ISP1301_I2C_REG_CLEAR_ADDR, ~0); /* Enable usb_need_clk clock after transceiver is initialized */ - __raw_writel((__raw_readl(USB_CTRL) | (1 << 22)), USB_CTRL); + __raw_writel(__raw_readl(USB_CTRL) | USB_HOST_NEED_CLK_EN, USB_CTRL); printk(KERN_INFO "ISP1301 Vendor ID : 0x%04x\n", i2c_smbus_read_word_data(isp1301_i2c_client, 0x00)); @@ -372,65 +297,55 @@ static int __devinit usb_hcd_nxp_probe(struct platform_device *pdev) struct usb_hcd *hcd = 0; struct ohci_hcd *ohci; const struct hc_driver *driver = &ohci_nxp_hc_driver; - struct i2c_adapter *i2c_adap; - struct i2c_board_info i2c_info; - + struct resource *res; int ret = 0, irq; + struct device_node *isp1301_node; - dev_dbg(&pdev->dev, "%s: " DRIVER_DESC " (nxp)\n", hcd_name); - if (usb_disabled()) { - err("USB is disabled"); - ret = -ENODEV; - goto out; + if (pdev->dev.of_node) { + isp1301_node = of_parse_phandle(pdev->dev.of_node, + "transceiver", 0); + } else { + isp1301_node = NULL; } - if (pdev->num_resources != 2 - || pdev->resource[0].flags != IORESOURCE_MEM - || pdev->resource[1].flags != IORESOURCE_IRQ) { - err("Invalid resource configuration"); - ret = -ENODEV; + isp1301_i2c_client = isp1301_get_client(isp1301_node); + if (!isp1301_i2c_client) { + ret = -EPROBE_DEFER; goto out; } - /* Enable AHB slave USB clock, needed for further USB clock control */ - __raw_writel(USB_SLAVE_HCLK_EN | (1 << 19), USB_CTRL); + pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); + pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; - ret = i2c_add_driver(&isp1301_driver); - if (ret < 0) { - err("failed to add ISP1301 driver"); - goto out; - } - i2c_adap = i2c_get_adapter(2); - memset(&i2c_info, 0, sizeof(struct i2c_board_info)); - strlcpy(i2c_info.type, "isp1301_nxp", I2C_NAME_SIZE); - isp1301_i2c_client = i2c_new_probed_device(i2c_adap, &i2c_info, - normal_i2c, NULL); - i2c_put_adapter(i2c_adap); - if (!isp1301_i2c_client) { - err("failed to connect I2C to ISP1301 USB Transceiver"); + dev_dbg(&pdev->dev, "%s: " DRIVER_DESC " (nxp)\n", hcd_name); + if (usb_disabled()) { + dev_err(&pdev->dev, "USB is disabled\n"); ret = -ENODEV; - goto out_i2c_driver; + goto out; } + /* Enable AHB slave USB clock, needed for further USB clock control */ + __raw_writel(USB_SLAVE_HCLK_EN | PAD_CONTROL_LAST_DRIVEN, USB_CTRL); + isp1301_configure(); /* Enable USB PLL */ usb_clk = clk_get(&pdev->dev, "ck_pll5"); if (IS_ERR(usb_clk)) { - err("failed to acquire USB PLL"); + dev_err(&pdev->dev, "failed to acquire USB PLL\n"); ret = PTR_ERR(usb_clk); goto out1; } ret = clk_enable(usb_clk); if (ret < 0) { - err("failed to start USB PLL"); + dev_err(&pdev->dev, "failed to start USB PLL\n"); goto out2; } ret = clk_set_rate(usb_clk, 48000); if (ret < 0) { - err("failed to set USB clock rate"); + dev_err(&pdev->dev, "failed to set USB clock rate\n"); goto out3; } @@ -442,9 +357,9 @@ static int __devinit usb_hcd_nxp_probe(struct platform_device *pdev) while ((__raw_readl(USB_OTG_CLK_STAT) & USB_CLOCK_MASK) != USB_CLOCK_MASK) ; - hcd = usb_create_hcd (driver, &pdev->dev, dev_name(&pdev->dev)); + hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev)); if (!hcd) { - err("Failed to allocate HC buffer"); + dev_err(&pdev->dev, "Failed to allocate HC buffer\n"); ret = -ENOMEM; goto out3; } @@ -452,14 +367,21 @@ static int __devinit usb_hcd_nxp_probe(struct platform_device *pdev) /* Set all USB bits in the Start Enable register */ nxp_set_usb_bits(); - hcd->rsrc_start = pdev->resource[0].start; - hcd->rsrc_len = pdev->resource[0].end - pdev->resource[0].start + 1; - if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { - dev_dbg(&pdev->dev, "request_mem_region failed\n"); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "Failed to get MEM resource\n"); + ret = -ENOMEM; + goto out4; + } + + hcd->regs = devm_request_and_ioremap(&pdev->dev, res); + if (!hcd->regs) { + dev_err(&pdev->dev, "Failed to devm_request_and_ioremap\n"); ret = -ENOMEM; goto out4; } - hcd->regs = (void __iomem *)pdev->resource[0].start; + hcd->rsrc_start = res->start; + hcd->rsrc_len = resource_size(res); irq = platform_get_irq(pdev, 0); if (irq < 0) { @@ -486,10 +408,7 @@ out3: out2: clk_put(usb_clk); out1: - i2c_unregister_device(isp1301_i2c_client); isp1301_i2c_client = NULL; -out_i2c_driver: - i2c_del_driver(&isp1301_driver); out: return ret; } @@ -507,7 +426,6 @@ static int usb_hcd_nxp_remove(struct platform_device *pdev) clk_put(usb_clk); i2c_unregister_device(isp1301_i2c_client); isp1301_i2c_client = NULL; - i2c_del_driver(&isp1301_driver); platform_set_drvdata(pdev, NULL); @@ -517,10 +435,19 @@ static int usb_hcd_nxp_remove(struct platform_device *pdev) /* work with hotplug and coldplug */ MODULE_ALIAS("platform:usb-ohci"); +#ifdef CONFIG_OF +static const struct of_device_id usb_hcd_nxp_match[] = { + { .compatible = "nxp,ohci-nxp" }, + {}, +}; +MODULE_DEVICE_TABLE(of, usb_hcd_nxp_match); +#endif + static struct platform_driver usb_hcd_nxp_driver = { .driver = { .name = "usb-ohci", .owner = THIS_MODULE, + .of_match_table = of_match_ptr(usb_hcd_nxp_match), }, .probe = usb_hcd_nxp_probe, .remove = usb_hcd_nxp_remove, diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c index 96451e41ee8..9ce35d0d9d5 100644 --- a/drivers/usb/host/ohci-omap.c +++ b/drivers/usb/host/ohci-omap.c @@ -205,8 +205,9 @@ static int ohci_omap_init(struct usb_hcd *hcd) need_transceiver = need_transceiver || machine_is_omap_h2() || machine_is_omap_h3(); - if (cpu_is_omap16xx()) - ocpi_enable(); + /* XXX OMAP16xx only */ + if (config->ocpi_enable) + config->ocpi_enable(); #ifdef CONFIG_USB_OTG if (need_transceiver) { @@ -217,8 +218,7 @@ static int ohci_omap_init(struct usb_hcd *hcd) dev_dbg(hcd->self.controller, "init %s transceiver, status %d\n", ohci->transceiver->label, status); if (status) { - if (ohci->transceiver) - put_device(ohci->transceiver->dev); + usb_put_transceiver(ohci->transceiver); return status; } } else { @@ -405,7 +405,7 @@ usb_hcd_omap_remove (struct usb_hcd *hcd, struct platform_device *pdev) usb_remove_hcd(hcd); if (ohci->transceiver) { (void) otg_set_host(ohci->transceiver->otg, 0); - put_device(ohci->transceiver->dev); + usb_put_transceiver(ohci->transceiver); } if (machine_is_omap_osk()) gpio_free(9); diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c index ec5c6791c8b..670c7059c9a 100644 --- a/drivers/usb/host/ohci-platform.c +++ b/drivers/usb/host/ohci-platform.c @@ -93,13 +93,13 @@ static int __devinit ohci_platform_probe(struct platform_device *dev) irq = platform_get_irq(dev, 0); if (irq < 0) { - pr_err("no irq provieded"); + pr_err("no irq provided"); return irq; } res_mem = platform_get_resource(dev, IORESOURCE_MEM, 0); if (!res_mem) { - pr_err("no memory recourse provieded"); + pr_err("no memory recourse provided"); return -ENXIO; } diff --git a/drivers/usb/host/ohci-pnx8550.c b/drivers/usb/host/ohci-pnx8550.c index f13d08f94d6..148d27d6a67 100644 --- a/drivers/usb/host/ohci-pnx8550.c +++ b/drivers/usb/host/ohci-pnx8550.c @@ -157,7 +157,8 @@ ohci_pnx8550_start (struct usb_hcd *hcd) return ret; if ((ret = ohci_run (ohci)) < 0) { - err ("can't start %s", hcd->self.bus_name); + dev_err(hcd->self.controller, "can't start %s", + hcd->self.bus_name); ohci_stop (hcd); return ret; } diff --git a/drivers/usb/host/ohci-ppc-of.c b/drivers/usb/host/ohci-ppc-of.c index d24cc89de16..e27d5ae2b9e 100644 --- a/drivers/usb/host/ohci-ppc-of.c +++ b/drivers/usb/host/ohci-ppc-of.c @@ -29,7 +29,8 @@ ohci_ppc_of_start(struct usb_hcd *hcd) return ret; if ((ret = ohci_run(ohci)) < 0) { - err("can't start %s", ohci_to_hcd(ohci)->self.bus_name); + dev_err(hcd->self.controller, "can't start %s\n", + hcd->self.bus_name); ohci_stop(hcd); return ret; } @@ -236,7 +237,7 @@ MODULE_DEVICE_TABLE(of, ohci_hcd_ppc_of_match); #if !defined(CONFIG_USB_OHCI_HCD_PPC_OF_BE) && \ !defined(CONFIG_USB_OHCI_HCD_PPC_OF_LE) -#error "No endianess selected for ppc-of-ohci" +#error "No endianness selected for ppc-of-ohci" #endif diff --git a/drivers/usb/host/ohci-ppc-soc.c b/drivers/usb/host/ohci-ppc-soc.c index 1514b706747..185c39ed81b 100644 --- a/drivers/usb/host/ohci-ppc-soc.c +++ b/drivers/usb/host/ohci-ppc-soc.c @@ -130,7 +130,8 @@ ohci_ppc_soc_start(struct usb_hcd *hcd) return ret; if ((ret = ohci_run(ohci)) < 0) { - err("can't start %s", ohci_to_hcd(ohci)->self.bus_name); + dev_err(hcd->self.controller, "can't start %s\n", + hcd->self.bus_name); ohci_stop(hcd); return ret; } diff --git a/drivers/usb/host/ohci-ps3.c b/drivers/usb/host/ohci-ps3.c index 6fd4fa1f19b..2ee1d8d713d 100644 --- a/drivers/usb/host/ohci-ps3.c +++ b/drivers/usb/host/ohci-ps3.c @@ -45,7 +45,8 @@ static int __devinit ps3_ohci_hc_start(struct usb_hcd *hcd) result = ohci_run(ohci); if (result < 0) { - err("can't start %s", hcd->self.bus_name); + dev_err(hcd->self.controller, "can't start %s\n", + hcd->self.bus_name); ohci_stop(hcd); } diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c index c31b2815be1..e1a3cc6d28d 100644 --- a/drivers/usb/host/ohci-pxa27x.c +++ b/drivers/usb/host/ohci-pxa27x.c @@ -419,7 +419,8 @@ ohci_pxa27x_start (struct usb_hcd *hcd) return ret; if ((ret = ohci_run (ohci)) < 0) { - err ("can't start %s", hcd->self.bus_name); + dev_err(hcd->self.controller, "can't start %s", + hcd->self.bus_name); ohci_stop (hcd); return ret; } diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c index 56dcf069246..664c869eb09 100644 --- a/drivers/usb/host/ohci-s3c2410.c +++ b/drivers/usb/host/ohci-s3c2410.c @@ -420,7 +420,8 @@ ohci_s3c2410_start(struct usb_hcd *hcd) ret = ohci_run(ohci); if (ret < 0) { - err("can't start %s", hcd->self.bus_name); + dev_err(hcd->self.controller, "can't start %s\n", + hcd->self.bus_name); ohci_stop(hcd); return ret; } diff --git a/drivers/usb/host/ohci-sa1111.c b/drivers/usb/host/ohci-sa1111.c index e1004fb37bd..b6cc9252092 100644 --- a/drivers/usb/host/ohci-sa1111.c +++ b/drivers/usb/host/ohci-sa1111.c @@ -46,7 +46,7 @@ static void dump_hci_status(struct usb_hcd *hcd, const char *label) { unsigned long status = sa1111_readl(hcd->regs + USB_STATUS); - dbg("%s USB_STATUS = { %s%s%s%s%s}", label, + printk(KERN_DEBUG "%s USB_STATUS = { %s%s%s%s%s}\n", label, ((status & USB_STATUS_IRQHCIRMTWKUP) ? "IRQHCIRMTWKUP " : ""), ((status & USB_STATUS_IRQHCIBUFFACC) ? "IRQHCIBUFFACC " : ""), ((status & USB_STATUS_NIRQHCIM) ? "" : "IRQHCIM "), @@ -193,7 +193,7 @@ static int ohci_hcd_sa1111_probe(struct sa1111_dev *dev) hcd->rsrc_len = resource_size(&dev->res); if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { - dbg("request_mem_region failed"); + dev_dbg(&dev->dev, "request_mem_region failed\n"); ret = -EBUSY; goto err1; } diff --git a/drivers/usb/host/ohci-sh.c b/drivers/usb/host/ohci-sh.c index 84686d90805..76a20c27836 100644 --- a/drivers/usb/host/ohci-sh.c +++ b/drivers/usb/host/ohci-sh.c @@ -88,20 +88,20 @@ static int ohci_hcd_sh_probe(struct platform_device *pdev) res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { - err("platform_get_resource error."); + dev_err(&pdev->dev, "platform_get_resource error.\n"); return -ENODEV; } irq = platform_get_irq(pdev, 0); if (irq < 0) { - err("platform_get_irq error."); + dev_err(&pdev->dev, "platform_get_irq error.\n"); return -ENODEV; } /* initialize hcd */ hcd = usb_create_hcd(&ohci_sh_hc_driver, &pdev->dev, (char *)hcd_name); if (!hcd) { - err("Failed to create hcd"); + dev_err(&pdev->dev, "Failed to create hcd\n"); return -ENOMEM; } @@ -110,7 +110,7 @@ static int ohci_hcd_sh_probe(struct platform_device *pdev) hcd->rsrc_len = resource_size(res); ret = usb_add_hcd(hcd, irq, IRQF_SHARED); if (ret != 0) { - err("Failed to add hcd"); + dev_err(&pdev->dev, "Failed to add hcd\n"); usb_put_hcd(hcd); return ret; } diff --git a/drivers/usb/host/ohci-spear.c b/drivers/usb/host/ohci-spear.c index 95c16489e88..fc7305ee3c9 100644 --- a/drivers/usb/host/ohci-spear.c +++ b/drivers/usb/host/ohci-spear.c @@ -14,6 +14,7 @@ #include <linux/signal.h> #include <linux/platform_device.h> #include <linux/clk.h> +#include <linux/of.h> struct spear_ohci { struct ohci_hcd ohci; @@ -24,12 +25,12 @@ struct spear_ohci { static void spear_start_ohci(struct spear_ohci *ohci) { - clk_enable(ohci->clk); + clk_prepare_enable(ohci->clk); } static void spear_stop_ohci(struct spear_ohci *ohci) { - clk_disable(ohci->clk); + clk_disable_unprepare(ohci->clk); } static int __devinit ohci_spear_start(struct usb_hcd *hcd) @@ -90,6 +91,8 @@ static const struct hc_driver ohci_spear_hc_driver = { .start_port_reset = ohci_start_port_reset, }; +static u64 spear_ohci_dma_mask = DMA_BIT_MASK(32); + static int spear_ohci_hcd_drv_probe(struct platform_device *pdev) { const struct hc_driver *driver = &ohci_spear_hc_driver; @@ -98,11 +101,8 @@ static int spear_ohci_hcd_drv_probe(struct platform_device *pdev) struct spear_ohci *ohci_p; struct resource *res; int retval, irq; - int *pdata = pdev->dev.platform_data; char clk_name[20] = "usbh_clk"; - - if (pdata == NULL) - return -EFAULT; + static int instance = -1; irq = platform_get_irq(pdev, 0); if (irq < 0) { @@ -110,8 +110,22 @@ static int spear_ohci_hcd_drv_probe(struct platform_device *pdev) goto fail_irq_get; } - if (*pdata >= 0) - sprintf(clk_name, "usbh.%01d_clk", *pdata); + /* + * Right now device-tree probed devices don't get dma_mask set. + * Since shared usb code relies on it, set it here for now. + * Once we have dma capability bindings this can go away. + */ + if (!pdev->dev.dma_mask) + pdev->dev.dma_mask = &spear_ohci_dma_mask; + + /* + * Increment the device instance, when probing via device-tree + */ + if (pdev->id < 0) + instance++; + else + instance = pdev->id; + sprintf(clk_name, "usbh.%01d_clk", instance); usbh_clk = clk_get(NULL, clk_name); if (IS_ERR(usbh_clk)) { @@ -222,6 +236,11 @@ static int spear_ohci_hcd_drv_resume(struct platform_device *dev) } #endif +static struct of_device_id spear_ohci_id_table[] __devinitdata = { + { .compatible = "st,spear600-ohci", }, + { }, +}; + /* Driver definition to register with the platform bus */ static struct platform_driver spear_ohci_hcd_driver = { .probe = spear_ohci_hcd_drv_probe, @@ -233,6 +252,7 @@ static struct platform_driver spear_ohci_hcd_driver = { .driver = { .owner = THIS_MODULE, .name = "spear-ohci", + .of_match_table = of_match_ptr(spear_ohci_id_table), }, }; diff --git a/drivers/usb/host/ohci-ssb.c b/drivers/usb/host/ohci-ssb.c deleted file mode 100644 index 5ba18595d6f..00000000000 --- a/drivers/usb/host/ohci-ssb.c +++ /dev/null @@ -1,260 +0,0 @@ -/* - * Sonics Silicon Backplane - * Broadcom USB-core OHCI driver - * - * Copyright 2007 Michael Buesch <m@bues.ch> - * - * Derived from the OHCI-PCI driver - * Copyright 1999 Roman Weissgaerber - * Copyright 2000-2002 David Brownell - * Copyright 1999 Linus Torvalds - * Copyright 1999 Gregory P. Smith - * - * Derived from the USBcore related parts of Broadcom-SB - * Copyright 2005 Broadcom Corporation - * - * Licensed under the GNU/GPL. See COPYING for details. - */ -#include <linux/ssb/ssb.h> - - -#define SSB_OHCI_TMSLOW_HOSTMODE (1 << 29) - -struct ssb_ohci_device { - struct ohci_hcd ohci; /* _must_ be at the beginning. */ - - u32 enable_flags; -}; - -static inline -struct ssb_ohci_device *hcd_to_ssb_ohci(struct usb_hcd *hcd) -{ - return (struct ssb_ohci_device *)(hcd->hcd_priv); -} - - -static int ssb_ohci_reset(struct usb_hcd *hcd) -{ - struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd); - struct ohci_hcd *ohci = &ohcidev->ohci; - int err; - - ohci_hcd_init(ohci); - err = ohci_init(ohci); - - return err; -} - -static int ssb_ohci_start(struct usb_hcd *hcd) -{ - struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd); - struct ohci_hcd *ohci = &ohcidev->ohci; - int err; - - err = ohci_run(ohci); - if (err < 0) { - ohci_err(ohci, "can't start\n"); - ohci_stop(hcd); - } - - return err; -} - -static const struct hc_driver ssb_ohci_hc_driver = { - .description = "ssb-usb-ohci", - .product_desc = "SSB OHCI Controller", - .hcd_priv_size = sizeof(struct ssb_ohci_device), - - .irq = ohci_irq, - .flags = HCD_MEMORY | HCD_USB11, - - .reset = ssb_ohci_reset, - .start = ssb_ohci_start, - .stop = ohci_stop, - .shutdown = ohci_shutdown, - - .urb_enqueue = ohci_urb_enqueue, - .urb_dequeue = ohci_urb_dequeue, - .endpoint_disable = ohci_endpoint_disable, - - .get_frame_number = ohci_get_frame, - - .hub_status_data = ohci_hub_status_data, - .hub_control = ohci_hub_control, -#ifdef CONFIG_PM - .bus_suspend = ohci_bus_suspend, - .bus_resume = ohci_bus_resume, -#endif - - .start_port_reset = ohci_start_port_reset, -}; - -static void ssb_ohci_detach(struct ssb_device *dev) -{ - struct usb_hcd *hcd = ssb_get_drvdata(dev); - - if (hcd->driver->shutdown) - hcd->driver->shutdown(hcd); - usb_remove_hcd(hcd); - iounmap(hcd->regs); - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); - usb_put_hcd(hcd); - ssb_device_disable(dev, 0); -} - -static int ssb_ohci_attach(struct ssb_device *dev) -{ - struct ssb_ohci_device *ohcidev; - struct usb_hcd *hcd; - int err = -ENOMEM; - u32 tmp, flags = 0; - - if (dma_set_mask(dev->dma_dev, DMA_BIT_MASK(32)) || - dma_set_coherent_mask(dev->dma_dev, DMA_BIT_MASK(32))) - return -EOPNOTSUPP; - - if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV) { - /* Put the device into host-mode. */ - flags |= SSB_OHCI_TMSLOW_HOSTMODE; - ssb_device_enable(dev, flags); - } else if (dev->id.coreid == SSB_DEV_USB20_HOST) { - /* - * USB 2.0 special considerations: - * - * In addition to the standard SSB reset sequence, the Host - * Control Register must be programmed to bring the USB core - * and various phy components out of reset. - */ - ssb_device_enable(dev, 0); - ssb_write32(dev, 0x200, 0x7ff); - - /* Change Flush control reg */ - tmp = ssb_read32(dev, 0x400); - tmp &= ~8; - ssb_write32(dev, 0x400, tmp); - tmp = ssb_read32(dev, 0x400); - - /* Change Shim control reg */ - tmp = ssb_read32(dev, 0x304); - tmp &= ~0x100; - ssb_write32(dev, 0x304, tmp); - tmp = ssb_read32(dev, 0x304); - - udelay(1); - - /* Work around for 5354 failures */ - if (dev->id.revision == 2 && dev->bus->chip_id == 0x5354) { - /* Change syn01 reg */ - tmp = 0x00fe00fe; - ssb_write32(dev, 0x894, tmp); - - /* Change syn03 reg */ - tmp = ssb_read32(dev, 0x89c); - tmp |= 0x1; - ssb_write32(dev, 0x89c, tmp); - } - } else - ssb_device_enable(dev, 0); - - hcd = usb_create_hcd(&ssb_ohci_hc_driver, dev->dev, - dev_name(dev->dev)); - if (!hcd) - goto err_dev_disable; - ohcidev = hcd_to_ssb_ohci(hcd); - ohcidev->enable_flags = flags; - - tmp = ssb_read32(dev, SSB_ADMATCH0); - hcd->rsrc_start = ssb_admatch_base(tmp); - hcd->rsrc_len = ssb_admatch_size(tmp); - hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len); - if (!hcd->regs) - goto err_put_hcd; - err = usb_add_hcd(hcd, dev->irq, IRQF_SHARED); - if (err) - goto err_iounmap; - - ssb_set_drvdata(dev, hcd); - - return err; - -err_iounmap: - iounmap(hcd->regs); -err_put_hcd: - usb_put_hcd(hcd); -err_dev_disable: - ssb_device_disable(dev, flags); - return err; -} - -static int ssb_ohci_probe(struct ssb_device *dev, - const struct ssb_device_id *id) -{ - int err; - u16 chipid_top; - - /* USBcores are only connected on embedded devices. */ - chipid_top = (dev->bus->chip_id & 0xFF00); - if (chipid_top != 0x4700 && chipid_top != 0x5300) - return -ENODEV; - - /* TODO: Probably need checks here; is the core connected? */ - - if (usb_disabled()) - return -ENODEV; - - /* We currently always attach SSB_DEV_USB11_HOSTDEV - * as HOST OHCI. If we want to attach it as Client device, - * we must branch here and call into the (yet to - * be written) Client mode driver. Same for remove(). */ - - err = ssb_ohci_attach(dev); - - return err; -} - -static void ssb_ohci_remove(struct ssb_device *dev) -{ - ssb_ohci_detach(dev); -} - -#ifdef CONFIG_PM - -static int ssb_ohci_suspend(struct ssb_device *dev, pm_message_t state) -{ - ssb_device_disable(dev, 0); - - return 0; -} - -static int ssb_ohci_resume(struct ssb_device *dev) -{ - struct usb_hcd *hcd = ssb_get_drvdata(dev); - struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd); - - ssb_device_enable(dev, ohcidev->enable_flags); - - ohci_finish_controller_resume(hcd); - return 0; -} - -#else /* !CONFIG_PM */ -#define ssb_ohci_suspend NULL -#define ssb_ohci_resume NULL -#endif /* CONFIG_PM */ - -static const struct ssb_device_id ssb_ohci_table[] = { - SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOSTDEV, SSB_ANY_REV), - SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOST, SSB_ANY_REV), - SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB20_HOST, SSB_ANY_REV), - SSB_DEVTABLE_END -}; -MODULE_DEVICE_TABLE(ssb, ssb_ohci_table); - -static struct ssb_driver ssb_ohci_driver = { - .name = KBUILD_MODNAME, - .id_table = ssb_ohci_table, - .probe = ssb_ohci_probe, - .remove = ssb_ohci_remove, - .suspend = ssb_ohci_suspend, - .resume = ssb_ohci_resume, -}; diff --git a/drivers/usb/host/ohci-tmio.c b/drivers/usb/host/ohci-tmio.c index 120bfe6ede3..60c2b0722f2 100644 --- a/drivers/usb/host/ohci-tmio.c +++ b/drivers/usb/host/ohci-tmio.c @@ -140,7 +140,8 @@ static int ohci_tmio_start(struct usb_hcd *hcd) return ret; if ((ret = ohci_run(ohci)) < 0) { - err("can't start %s", hcd->self.bus_name); + dev_err(hcd->self.controller, "can't start %s\n", + hcd->self.bus_name); ohci_stop(hcd); return ret; } diff --git a/drivers/usb/host/ohci-xls.c b/drivers/usb/host/ohci-xls.c index a2247867af8..41e378f17c6 100644 --- a/drivers/usb/host/ohci-xls.c +++ b/drivers/usb/host/ohci-xls.c @@ -88,7 +88,8 @@ static int __devinit ohci_xls_start(struct usb_hcd *hcd) ohci = hcd_to_ohci(hcd); ret = ohci_run(ohci); if (ret < 0) { - err("can't start %s", hcd->self.bus_name); + dev_err(hcd->self.controller, "can't start %s\n", + hcd->self.bus_name); ohci_stop(hcd); return ret; } diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c index 3b38030b02a..4f0f0339532 100644 --- a/drivers/usb/host/oxu210hp-hcd.c +++ b/drivers/usb/host/oxu210hp-hcd.c @@ -1399,8 +1399,8 @@ static struct ehci_qh *qh_make(struct oxu_hcd *oxu, * But interval 1 scheduling is simpler, and * includes high bandwidth. */ - dbg("intr period %d uframes, NYET!", - urb->interval); + oxu_dbg(oxu, "intr period %d uframes, NYET!\n", + urb->interval); goto done; } } else { @@ -1471,7 +1471,7 @@ static struct ehci_qh *qh_make(struct oxu_hcd *oxu, } break; default: - dbg("bogus dev %p speed %d", urb->dev, urb->dev->speed); + oxu_dbg(oxu, "bogus dev %p speed %d\n", urb->dev, urb->dev->speed); done: qh_put(qh); return NULL; @@ -2307,7 +2307,7 @@ restart: qh_put(temp.qh); break; default: - dbg("corrupt type %d frame %d shadow %p", + oxu_dbg(oxu, "corrupt type %d frame %d shadow %p\n", type, frame, q.ptr); q.ptr = NULL; } @@ -2991,8 +2991,9 @@ static int oxu_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) /* shouldn't happen often, but ... * FIXME kill those tds' urbs */ - err("can't reschedule qh %p, err %d", - qh, status); + dev_err(hcd->self.controller, + "can't reschedule qh %p, err %d\n", qh, + status); } return status; } diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index 11de5f1be98..df0828cb2aa 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -9,6 +9,7 @@ */ #include <linux/types.h> +#include <linux/kconfig.h> #include <linux/kernel.h> #include <linux/pci.h> #include <linux/init.h> @@ -712,12 +713,28 @@ static int handshake(void __iomem *ptr, u32 mask, u32 done, return -ETIMEDOUT; } -bool usb_is_intel_switchable_xhci(struct pci_dev *pdev) +#define PCI_DEVICE_ID_INTEL_LYNX_POINT_XHCI 0x8C31 + +bool usb_is_intel_ppt_switchable_xhci(struct pci_dev *pdev) { return pdev->class == PCI_CLASS_SERIAL_USB_XHCI && pdev->vendor == PCI_VENDOR_ID_INTEL && pdev->device == PCI_DEVICE_ID_INTEL_PANTHERPOINT_XHCI; } + +/* The Intel Lynx Point chipset also has switchable ports. */ +bool usb_is_intel_lpt_switchable_xhci(struct pci_dev *pdev) +{ + return pdev->class == PCI_CLASS_SERIAL_USB_XHCI && + pdev->vendor == PCI_VENDOR_ID_INTEL && + pdev->device == PCI_DEVICE_ID_INTEL_LYNX_POINT_XHCI; +} + +bool usb_is_intel_switchable_xhci(struct pci_dev *pdev) +{ + return usb_is_intel_ppt_switchable_xhci(pdev) || + usb_is_intel_lpt_switchable_xhci(pdev); +} EXPORT_SYMBOL_GPL(usb_is_intel_switchable_xhci); /* @@ -742,6 +759,19 @@ void usb_enable_xhci_ports(struct pci_dev *xhci_pdev) { u32 ports_available; + /* Don't switchover the ports if the user hasn't compiled the xHCI + * driver. Otherwise they will see "dead" USB ports that don't power + * the devices. + */ + if (!IS_ENABLED(CONFIG_USB_XHCI_HCD)) { + dev_warn(&xhci_pdev->dev, + "CONFIG_USB_XHCI_HCD is turned off, " + "defaulting to EHCI.\n"); + dev_warn(&xhci_pdev->dev, + "USB 3.0 devices will work at USB 2.0 speeds.\n"); + return; + } + ports_available = 0xffffffff; /* Write USB3_PSSEN, the USB 3.0 Port SuperSpeed Enable * Register, to turn on SuperSpeed terminations for all @@ -825,9 +855,13 @@ static void __devinit quirk_usb_handoff_xhci(struct pci_dev *pdev) } } - /* Disable any BIOS SMIs */ - writel(XHCI_LEGACY_DISABLE_SMI, - base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET); + val = readl(base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET); + /* Mask off (turn off) any enabled SMIs */ + val &= XHCI_LEGACY_DISABLE_SMI; + /* Mask all SMI events bits, RW1C */ + val |= XHCI_LEGACY_SMI_EVENTS; + /* Disable any BIOS SMIs and clear all SMI events*/ + writel(val, base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET); if (usb_is_intel_switchable_xhci(pdev)) usb_enable_xhci_ports(pdev); diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c index 2bf1320dc9c..c868be65e76 100644 --- a/drivers/usb/host/r8a66597-hcd.c +++ b/drivers/usb/host/r8a66597-hcd.c @@ -401,7 +401,7 @@ static u8 alloc_usb_address(struct r8a66597 *r8a66597, struct urb *urb) if (r8a66597->address_map & (1 << addr)) continue; - dbg("alloc_address: r8a66597_addr=%d", addr); + dev_dbg(&urb->dev->dev, "alloc_address: r8a66597_addr=%d\n", addr); r8a66597->address_map |= 1 << addr; if (make_r8a66597_device(r8a66597, urb, addr) < 0) @@ -426,7 +426,7 @@ static void free_usb_address(struct r8a66597 *r8a66597, if (!dev) return; - dbg("free_addr: addr=%d", dev->address); + dev_dbg(&dev->udev->dev, "free_addr: addr=%d\n", dev->address); dev->state = USB_STATE_DEFAULT; r8a66597->address_map &= ~(1 << dev->address); @@ -819,7 +819,7 @@ static void enable_r8a66597_pipe(struct r8a66597 *r8a66597, struct urb *urb, struct r8a66597_device *dev = get_urb_to_r8a66597_dev(r8a66597, urb); struct r8a66597_pipe *pipe = hep->hcpriv; - dbg("enable_pipe:"); + dev_dbg(&dev->udev->dev, "enable_pipe:\n"); pipe->info = *info; set_pipe_reg_addr(pipe, R8A66597_PIPE_NO_DMA); @@ -898,7 +898,7 @@ static void disable_r8a66597_pipe_all(struct r8a66597 *r8a66597, force_dequeue(r8a66597, pipenum, dev->address); } - dbg("disable_pipe"); + dev_dbg(&dev->udev->dev, "disable_pipe\n"); r8a66597->dma_map &= ~(dev->dma_map); dev->dma_map = 0; @@ -2264,7 +2264,7 @@ static int r8a66597_bus_suspend(struct usb_hcd *hcd) struct r8a66597 *r8a66597 = hcd_to_r8a66597(hcd); int port; - dbg("%s", __func__); + dev_dbg(&r8a66597->device0.udev->dev, "%s\n", __func__); for (port = 0; port < r8a66597->max_root_hub; port++) { struct r8a66597_root_hub *rh = &r8a66597->root_hub[port]; @@ -2273,7 +2273,7 @@ static int r8a66597_bus_suspend(struct usb_hcd *hcd) if (!(rh->port & USB_PORT_STAT_ENABLE)) continue; - dbg("suspend port = %d", port); + dev_dbg(&rh->dev->udev->dev, "suspend port = %d\n", port); r8a66597_bclr(r8a66597, UACT, dvstctr_reg); /* suspend */ rh->port |= USB_PORT_STAT_SUSPEND; @@ -2295,7 +2295,7 @@ static int r8a66597_bus_resume(struct usb_hcd *hcd) struct r8a66597 *r8a66597 = hcd_to_r8a66597(hcd); int port; - dbg("%s", __func__); + dev_dbg(&r8a66597->device0.udev->dev, "%s\n", __func__); for (port = 0; port < r8a66597->max_root_hub; port++) { struct r8a66597_root_hub *rh = &r8a66597->root_hub[port]; @@ -2304,7 +2304,7 @@ static int r8a66597_bus_resume(struct usb_hcd *hcd) if (!(rh->port & USB_PORT_STAT_SUSPEND)) continue; - dbg("resume port = %d", port); + dev_dbg(&rh->dev->udev->dev, "resume port = %d\n", port); rh->port &= ~USB_PORT_STAT_SUSPEND; rh->port |= USB_PORT_STAT_C_SUSPEND << 16; r8a66597_mdfy(r8a66597, RESUME, RESUME | UACT, dvstctr_reg); @@ -2360,7 +2360,7 @@ static int r8a66597_suspend(struct device *dev) struct r8a66597 *r8a66597 = dev_get_drvdata(dev); int port; - dbg("%s", __func__); + dev_dbg(dev, "%s\n", __func__); disable_controller(r8a66597); @@ -2378,7 +2378,7 @@ static int r8a66597_resume(struct device *dev) struct r8a66597 *r8a66597 = dev_get_drvdata(dev); struct usb_hcd *hcd = r8a66597_to_hcd(r8a66597); - dbg("%s", __func__); + dev_dbg(dev, "%s\n", __func__); enable_controller(r8a66597); usb_root_hub_lost_power(hcd->self.root_hub); diff --git a/drivers/usb/host/ssb-hcd.c b/drivers/usb/host/ssb-hcd.c new file mode 100644 index 00000000000..c2a29faba07 --- /dev/null +++ b/drivers/usb/host/ssb-hcd.c @@ -0,0 +1,280 @@ +/* + * Sonics Silicon Backplane + * Broadcom USB-core driver (SSB bus glue) + * + * Copyright 2011-2012 Hauke Mehrtens <hauke@hauke-m.de> + * + * Based on ssb-ohci driver + * Copyright 2007 Michael Buesch <m@bues.ch> + * + * Derived from the OHCI-PCI driver + * Copyright 1999 Roman Weissgaerber + * Copyright 2000-2002 David Brownell + * Copyright 1999 Linus Torvalds + * Copyright 1999 Gregory P. Smith + * + * Derived from the USBcore related parts of Broadcom-SB + * Copyright 2005-2011 Broadcom Corporation + * + * Licensed under the GNU/GPL. See COPYING for details. + */ +#include <linux/ssb/ssb.h> +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/usb/ehci_pdriver.h> +#include <linux/usb/ohci_pdriver.h> + +MODULE_AUTHOR("Hauke Mehrtens"); +MODULE_DESCRIPTION("Common USB driver for SSB Bus"); +MODULE_LICENSE("GPL"); + +#define SSB_HCD_TMSLOW_HOSTMODE (1 << 29) + +struct ssb_hcd_device { + struct platform_device *ehci_dev; + struct platform_device *ohci_dev; + + u32 enable_flags; +}; + +static void __devinit ssb_hcd_5354wa(struct ssb_device *dev) +{ +#ifdef CONFIG_SSB_DRIVER_MIPS + /* Work around for 5354 failures */ + if (dev->id.revision == 2 && dev->bus->chip_id == 0x5354) { + /* Change syn01 reg */ + ssb_write32(dev, 0x894, 0x00fe00fe); + + /* Change syn03 reg */ + ssb_write32(dev, 0x89c, ssb_read32(dev, 0x89c) | 0x1); + } +#endif +} + +static void __devinit ssb_hcd_usb20wa(struct ssb_device *dev) +{ + if (dev->id.coreid == SSB_DEV_USB20_HOST) { + /* + * USB 2.0 special considerations: + * + * In addition to the standard SSB reset sequence, the Host + * Control Register must be programmed to bring the USB core + * and various phy components out of reset. + */ + ssb_write32(dev, 0x200, 0x7ff); + + /* Change Flush control reg */ + ssb_write32(dev, 0x400, ssb_read32(dev, 0x400) & ~8); + ssb_read32(dev, 0x400); + + /* Change Shim control reg */ + ssb_write32(dev, 0x304, ssb_read32(dev, 0x304) & ~0x100); + ssb_read32(dev, 0x304); + + udelay(1); + + ssb_hcd_5354wa(dev); + } +} + +/* based on arch/mips/brcm-boards/bcm947xx/pcibios.c */ +static u32 __devinit ssb_hcd_init_chip(struct ssb_device *dev) +{ + u32 flags = 0; + + if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV) + /* Put the device into host-mode. */ + flags |= SSB_HCD_TMSLOW_HOSTMODE; + + ssb_device_enable(dev, flags); + + ssb_hcd_usb20wa(dev); + + return flags; +} + +static const struct usb_ehci_pdata ehci_pdata = { +}; + +static const struct usb_ohci_pdata ohci_pdata = { +}; + +static struct platform_device * __devinit +ssb_hcd_create_pdev(struct ssb_device *dev, bool ohci, u32 addr, u32 len) +{ + struct platform_device *hci_dev; + struct resource hci_res[2]; + int ret = -ENOMEM; + + memset(hci_res, 0, sizeof(hci_res)); + + hci_res[0].start = addr; + hci_res[0].end = hci_res[0].start + len - 1; + hci_res[0].flags = IORESOURCE_MEM; + + hci_res[1].start = dev->irq; + hci_res[1].flags = IORESOURCE_IRQ; + + hci_dev = platform_device_alloc(ohci ? "ohci-platform" : + "ehci-platform" , 0); + if (!hci_dev) + return NULL; + + hci_dev->dev.parent = dev->dev; + hci_dev->dev.dma_mask = &hci_dev->dev.coherent_dma_mask; + + ret = platform_device_add_resources(hci_dev, hci_res, + ARRAY_SIZE(hci_res)); + if (ret) + goto err_alloc; + if (ohci) + ret = platform_device_add_data(hci_dev, &ohci_pdata, + sizeof(ohci_pdata)); + else + ret = platform_device_add_data(hci_dev, &ehci_pdata, + sizeof(ehci_pdata)); + if (ret) + goto err_alloc; + ret = platform_device_add(hci_dev); + if (ret) + goto err_alloc; + + return hci_dev; + +err_alloc: + platform_device_put(hci_dev); + return ERR_PTR(ret); +} + +static int __devinit ssb_hcd_probe(struct ssb_device *dev, + const struct ssb_device_id *id) +{ + int err, tmp; + int start, len; + u16 chipid_top; + u16 coreid = dev->id.coreid; + struct ssb_hcd_device *usb_dev; + + /* USBcores are only connected on embedded devices. */ + chipid_top = (dev->bus->chip_id & 0xFF00); + if (chipid_top != 0x4700 && chipid_top != 0x5300) + return -ENODEV; + + /* TODO: Probably need checks here; is the core connected? */ + + if (dma_set_mask(dev->dma_dev, DMA_BIT_MASK(32)) || + dma_set_coherent_mask(dev->dma_dev, DMA_BIT_MASK(32))) + return -EOPNOTSUPP; + + usb_dev = kzalloc(sizeof(struct ssb_hcd_device), GFP_KERNEL); + if (!usb_dev) + return -ENOMEM; + + /* We currently always attach SSB_DEV_USB11_HOSTDEV + * as HOST OHCI. If we want to attach it as Client device, + * we must branch here and call into the (yet to + * be written) Client mode driver. Same for remove(). */ + usb_dev->enable_flags = ssb_hcd_init_chip(dev); + + tmp = ssb_read32(dev, SSB_ADMATCH0); + + start = ssb_admatch_base(tmp); + len = (coreid == SSB_DEV_USB20_HOST) ? 0x800 : ssb_admatch_size(tmp); + usb_dev->ohci_dev = ssb_hcd_create_pdev(dev, true, start, len); + if (IS_ERR(usb_dev->ohci_dev)) { + err = PTR_ERR(usb_dev->ohci_dev); + goto err_free_usb_dev; + } + + if (coreid == SSB_DEV_USB20_HOST) { + start = ssb_admatch_base(tmp) + 0x800; /* ehci core offset */ + usb_dev->ehci_dev = ssb_hcd_create_pdev(dev, false, start, len); + if (IS_ERR(usb_dev->ehci_dev)) { + err = PTR_ERR(usb_dev->ehci_dev); + goto err_unregister_ohci_dev; + } + } + + ssb_set_drvdata(dev, usb_dev); + return 0; + +err_unregister_ohci_dev: + platform_device_unregister(usb_dev->ohci_dev); +err_free_usb_dev: + kfree(usb_dev); + return err; +} + +static void __devexit ssb_hcd_remove(struct ssb_device *dev) +{ + struct ssb_hcd_device *usb_dev = ssb_get_drvdata(dev); + struct platform_device *ohci_dev = usb_dev->ohci_dev; + struct platform_device *ehci_dev = usb_dev->ehci_dev; + + if (ohci_dev) + platform_device_unregister(ohci_dev); + if (ehci_dev) + platform_device_unregister(ehci_dev); + + ssb_device_disable(dev, 0); +} + +static void __devexit ssb_hcd_shutdown(struct ssb_device *dev) +{ + ssb_device_disable(dev, 0); +} + +#ifdef CONFIG_PM + +static int ssb_hcd_suspend(struct ssb_device *dev, pm_message_t state) +{ + ssb_device_disable(dev, 0); + + return 0; +} + +static int ssb_hcd_resume(struct ssb_device *dev) +{ + struct ssb_hcd_device *usb_dev = ssb_get_drvdata(dev); + + ssb_device_enable(dev, usb_dev->enable_flags); + + return 0; +} + +#else /* !CONFIG_PM */ +#define ssb_hcd_suspend NULL +#define ssb_hcd_resume NULL +#endif /* CONFIG_PM */ + +static const struct ssb_device_id ssb_hcd_table[] __devinitconst = { + SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOSTDEV, SSB_ANY_REV), + SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOST, SSB_ANY_REV), + SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB20_HOST, SSB_ANY_REV), + SSB_DEVTABLE_END +}; +MODULE_DEVICE_TABLE(ssb, ssb_hcd_table); + +static struct ssb_driver ssb_hcd_driver = { + .name = KBUILD_MODNAME, + .id_table = ssb_hcd_table, + .probe = ssb_hcd_probe, + .remove = __devexit_p(ssb_hcd_remove), + .shutdown = ssb_hcd_shutdown, + .suspend = ssb_hcd_suspend, + .resume = ssb_hcd_resume, +}; + +static int __init ssb_hcd_init(void) +{ + return ssb_driver_register(&ssb_hcd_driver); +} +module_init(ssb_hcd_init); + +static void __exit ssb_hcd_exit(void) +{ + ssb_driver_unregister(&ssb_hcd_driver); +} +module_exit(ssb_hcd_exit); diff --git a/drivers/usb/host/uhci-hub.c b/drivers/usb/host/uhci-hub.c index 045cde4cbc3..768d54295a2 100644 --- a/drivers/usb/host/uhci-hub.c +++ b/drivers/usb/host/uhci-hub.c @@ -196,11 +196,12 @@ static int uhci_hub_status_data(struct usb_hcd *hcd, char *buf) status = get_hub_status_data(uhci, buf); switch (uhci->rh_state) { - case UHCI_RH_SUSPENDING: case UHCI_RH_SUSPENDED: /* if port change, ask to be resumed */ - if (status || uhci->resuming_ports) + if (status || uhci->resuming_ports) { + status = 1; usb_hcd_resume_root_hub(hcd); + } break; case UHCI_RH_AUTO_STOPPED: diff --git a/drivers/usb/host/xhci-dbg.c b/drivers/usb/host/xhci-dbg.c index e9b0f043455..4b436f5a417 100644 --- a/drivers/usb/host/xhci-dbg.c +++ b/drivers/usb/host/xhci-dbg.c @@ -119,7 +119,7 @@ static void xhci_print_command_reg(struct xhci_hcd *xhci) xhci_dbg(xhci, " Event Interrupts %s\n", (temp & CMD_EIE) ? "enabled " : "disabled"); xhci_dbg(xhci, " Host System Error Interrupts %s\n", - (temp & CMD_EIE) ? "enabled " : "disabled"); + (temp & CMD_HSEIE) ? "enabled " : "disabled"); xhci_dbg(xhci, " HC has %sfinished light reset\n", (temp & CMD_LRESET) ? "not " : ""); } diff --git a/drivers/usb/host/xhci-ext-caps.h b/drivers/usb/host/xhci-ext-caps.h index c7f33123d4c..377f4242dab 100644 --- a/drivers/usb/host/xhci-ext-caps.h +++ b/drivers/usb/host/xhci-ext-caps.h @@ -62,8 +62,9 @@ /* USB Legacy Support Control and Status Register - section 7.1.2 */ /* Add this offset, plus the value of xECP in HCCPARAMS to the base address */ #define XHCI_LEGACY_CONTROL_OFFSET (0x04) -/* bits 1:2, 5:12, and 17:19 need to be preserved; bits 21:28 should be zero */ -#define XHCI_LEGACY_DISABLE_SMI ((0x3 << 1) + (0xff << 5) + (0x7 << 17)) +/* bits 1:3, 5:12, and 17:19 need to be preserved; bits 21:28 should be zero */ +#define XHCI_LEGACY_DISABLE_SMI ((0x7 << 1) + (0xff << 5) + (0x7 << 17)) +#define XHCI_LEGACY_SMI_EVENTS (0x7 << 29) /* USB 2.0 xHCI 0.96 L1C capability - section 7.2.2.1.3.2 */ #define XHCI_L1C (1 << 16) diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 673ad120c43..2732ef660c5 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -475,6 +475,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, struct xhci_bus_state *bus_state; u16 link_state = 0; u16 wake_mask = 0; + u16 timeout = 0; max_ports = xhci_get_ports(hcd, &port_array); bus_state = &xhci->bus_state[hcd_index(hcd)]; @@ -558,6 +559,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, xhci_dbg(xhci, "Resume USB2 port %d\n", wIndex + 1); bus_state->resume_done[wIndex] = 0; + clear_bit(wIndex, &bus_state->resuming_ports); xhci_set_link_state(xhci, port_array, wIndex, XDEV_U0); xhci_dbg(xhci, "set port %d resume\n", @@ -622,6 +624,8 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, link_state = (wIndex & 0xff00) >> 3; if (wValue == USB_PORT_FEAT_REMOTE_WAKE_MASK) wake_mask = wIndex & 0xff00; + /* The MSB of wIndex is the U1/U2 timeout */ + timeout = (wIndex & 0xff00) >> 8; wIndex &= 0xff; if (!wIndex || wIndex > max_ports) goto error; @@ -746,6 +750,22 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, temp = xhci_readl(xhci, port_array[wIndex]); break; + case USB_PORT_FEAT_U1_TIMEOUT: + if (hcd->speed != HCD_USB3) + goto error; + temp = xhci_readl(xhci, port_array[wIndex] + 1); + temp &= ~PORT_U1_TIMEOUT_MASK; + temp |= PORT_U1_TIMEOUT(timeout); + xhci_writel(xhci, temp, port_array[wIndex] + 1); + break; + case USB_PORT_FEAT_U2_TIMEOUT: + if (hcd->speed != HCD_USB3) + goto error; + temp = xhci_readl(xhci, port_array[wIndex] + 1); + temp &= ~PORT_U2_TIMEOUT_MASK; + temp |= PORT_U2_TIMEOUT(timeout); + xhci_writel(xhci, temp, port_array[wIndex] + 1); + break; default: goto error; } @@ -845,7 +865,12 @@ int xhci_hub_status_data(struct usb_hcd *hcd, char *buf) /* Initial status is no changes */ retval = (max_ports + 8) / 8; memset(buf, 0, retval); - status = 0; + + /* + * Inform the usbcore about resume-in-progress by returning + * a non-zero value even if there are no status changes. + */ + status = bus_state->resuming_ports; mask = PORT_CSC | PORT_PEC | PORT_OCC | PORT_PLC | PORT_WRC; @@ -885,15 +910,11 @@ int xhci_bus_suspend(struct usb_hcd *hcd) spin_lock_irqsave(&xhci->lock, flags); if (hcd->self.root_hub->do_remote_wakeup) { - port_index = max_ports; - while (port_index--) { - if (bus_state->resume_done[port_index] != 0) { - spin_unlock_irqrestore(&xhci->lock, flags); - xhci_dbg(xhci, "suspend failed because " - "port %d is resuming\n", - port_index + 1); - return -EBUSY; - } + if (bus_state->resuming_ports) { + spin_unlock_irqrestore(&xhci->lock, flags); + xhci_dbg(xhci, "suspend failed because " + "a port is resuming\n"); + return -EBUSY; } } diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index cae4c6f2845..ec4338eec82 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -1791,16 +1791,19 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) { struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller); struct dev_info *dev_info, *next; + struct list_head *tt_list_head; + struct list_head *tt; + struct list_head *endpoints; + struct list_head *ep, *q; + struct xhci_tt_bw_info *tt_info; + struct xhci_interval_bw_table *bwt; + struct xhci_virt_ep *virt_ep; + unsigned long flags; int size; int i; /* Free the Event Ring Segment Table and the actual Event Ring */ - if (xhci->ir_set) { - xhci_writel(xhci, 0, &xhci->ir_set->erst_size); - xhci_write_64(xhci, 0, &xhci->ir_set->erst_base); - xhci_write_64(xhci, 0, &xhci->ir_set->erst_dequeue); - } size = sizeof(struct xhci_erst_entry)*(xhci->erst.num_entries); if (xhci->erst.entries) dma_free_coherent(&pdev->dev, size, @@ -1812,7 +1815,9 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) xhci->event_ring = NULL; xhci_dbg(xhci, "Freed event ring\n"); - xhci_write_64(xhci, 0, &xhci->op_regs->cmd_ring); + if (xhci->lpm_command) + xhci_free_command(xhci, xhci->lpm_command); + xhci->cmd_ring_reserved_trbs = 0; if (xhci->cmd_ring) xhci_ring_free(xhci, xhci->cmd_ring); xhci->cmd_ring = NULL; @@ -1841,7 +1846,6 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) xhci->medium_streams_pool = NULL; xhci_dbg(xhci, "Freed medium stream array pool\n"); - xhci_write_64(xhci, 0, &xhci->op_regs->dcbaa_ptr); if (xhci->dcbaa) dma_free_coherent(&pdev->dev, sizeof(*xhci->dcbaa), xhci->dcbaa, xhci->dcbaa->dma); @@ -1856,8 +1860,26 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) } spin_unlock_irqrestore(&xhci->lock, flags); + bwt = &xhci->rh_bw->bw_table; + for (i = 0; i < XHCI_MAX_INTERVAL; i++) { + endpoints = &bwt->interval_bw[i].endpoints; + list_for_each_safe(ep, q, endpoints) { + virt_ep = list_entry(ep, struct xhci_virt_ep, bw_endpoint_list); + list_del(&virt_ep->bw_endpoint_list); + kfree(virt_ep); + } + } + + tt_list_head = &xhci->rh_bw->tts; + list_for_each_safe(tt, q, tt_list_head) { + tt_info = list_entry(tt, struct xhci_tt_bw_info, tt_list); + list_del(tt); + kfree(tt_info); + } + xhci->num_usb2_ports = 0; xhci->num_usb3_ports = 0; + xhci->num_active_eps = 0; kfree(xhci->usb2_ports); kfree(xhci->usb3_ports); kfree(xhci->port_array); @@ -2357,6 +2379,16 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) xhci_write_64(xhci, val_64, &xhci->op_regs->cmd_ring); xhci_dbg_cmd_ptrs(xhci); + xhci->lpm_command = xhci_alloc_command(xhci, true, true, flags); + if (!xhci->lpm_command) + goto fail; + + /* Reserve one command ring TRB for disabling LPM. + * Since the USB core grabs the shared usb_bus bandwidth mutex before + * disabling LPM, we only need to reserve one TRB for all devices. + */ + xhci->cmd_ring_reserved_trbs++; + val = xhci_readl(xhci, &xhci->cap_regs->db_off); val &= DBOFF_MASK; xhci_dbg(xhci, "// Doorbell array is located at offset 0x%x" @@ -2459,6 +2491,8 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) fail: xhci_warn(xhci, "Couldn't initialize memory\n"); + xhci_halt(xhci); + xhci_reset(xhci); xhci_mem_cleanup(xhci); return -ENOMEM; } diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index ef98b38626f..18b231b0c5d 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -72,6 +72,7 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) xhci_dbg(xhci, "QUIRK: Fresco Logic revision %u " "has broken MSI implementation\n", pdev->revision); + xhci->quirks |= XHCI_TRUST_TX_LENGTH; } if (pdev->vendor == PCI_VENDOR_ID_NEC) @@ -83,6 +84,10 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) /* AMD PLL quirk */ if (pdev->vendor == PCI_VENDOR_ID_AMD && usb_amd_find_chipset_info()) xhci->quirks |= XHCI_AMD_PLL_FIX; + if (pdev->vendor == PCI_VENDOR_ID_INTEL) { + xhci->quirks |= XHCI_LPM_SUPPORT; + xhci->quirks |= XHCI_INTEL_HOST; + } if (pdev->vendor == PCI_VENDOR_ID_INTEL && pdev->device == PCI_DEVICE_ID_INTEL_PANTHERPOINT_XHCI) { xhci->quirks |= XHCI_SPURIOUS_SUCCESS; @@ -95,6 +100,8 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) xhci->quirks |= XHCI_RESET_ON_RESUME; xhci_dbg(xhci, "QUIRK: Resetting on resume\n"); } + if (pdev->vendor == PCI_VENDOR_ID_VIA) + xhci->quirks |= XHCI_RESET_ON_RESUME; } /* called during probe() after chip reset completes */ @@ -167,6 +174,13 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) if (retval) goto put_usb3_hcd; /* Roothub already marked as USB 3.0 speed */ + + /* We know the LPM timeout algorithms for this host, let the USB core + * enable and disable LPM for devices under the USB 3.0 roothub. + */ + if (xhci->quirks & XHCI_LPM_SUPPORT) + hcd_to_bus(xhci->shared_hcd)->root_hub->lpm_capable = 1; + return 0; put_usb3_hcd: @@ -290,6 +304,8 @@ static const struct hc_driver xhci_pci_hc_driver = { */ .update_device = xhci_update_device, .set_usb2_hw_lpm = xhci_set_usb2_hardware_lpm, + .enable_usb3_lpm_timeout = xhci_enable_usb3_lpm_timeout, + .disable_usb3_lpm_timeout = xhci_disable_usb3_lpm_timeout, }; /*-------------------------------------------------------------------------*/ @@ -326,7 +342,7 @@ int __init xhci_register_pci(void) return pci_register_driver(&xhci_pci_driver); } -void __exit xhci_unregister_pci(void) +void xhci_unregister_pci(void) { pci_unregister_driver(&xhci_pci_driver); } diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 6bd9d53062e..23b4aefd103 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -1377,6 +1377,7 @@ static void handle_port_status(struct xhci_hcd *xhci, xhci_dbg(xhci, "resume HS port %d\n", port_id); bus_state->resume_done[faked_port_index] = jiffies + msecs_to_jiffies(20); + set_bit(faked_port_index, &bus_state->resuming_ports); mod_timer(&hcd->rh_timer, bus_state->resume_done[faked_port_index]); /* Do the rest in GetPortStatus */ @@ -1786,8 +1787,12 @@ static int process_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td, /* handle completion code */ switch (trb_comp_code) { case COMP_SUCCESS: - frame->status = 0; - break; + if (TRB_LEN(le32_to_cpu(event->transfer_len)) == 0) { + frame->status = 0; + break; + } + if ((xhci->quirks & XHCI_TRUST_TX_LENGTH)) + trb_comp_code = COMP_SHORT_TX; case COMP_SHORT_TX: frame->status = td->urb->transfer_flags & URB_SHORT_NOT_OK ? -EREMOTEIO : 0; @@ -1803,6 +1808,7 @@ static int process_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td, break; case COMP_DEV_ERR: case COMP_STALL: + case COMP_TX_ERR: frame->status = -EPROTO; skip_td = true; break; @@ -1883,13 +1889,16 @@ static int process_bulk_intr_td(struct xhci_hcd *xhci, struct xhci_td *td, switch (trb_comp_code) { case COMP_SUCCESS: /* Double check that the HW transferred everything. */ - if (event_trb != td->last_trb) { + if (event_trb != td->last_trb || + TRB_LEN(le32_to_cpu(event->transfer_len)) != 0) { xhci_warn(xhci, "WARN Successful completion " "on short TX\n"); if (td->urb->transfer_flags & URB_SHORT_NOT_OK) *status = -EREMOTEIO; else *status = 0; + if ((xhci->quirks & XHCI_TRUST_TX_LENGTH)) + trb_comp_code = COMP_SHORT_TX; } else { *status = 0; } @@ -2048,6 +2057,13 @@ static int handle_tx_event(struct xhci_hcd *xhci, * transfer type */ case COMP_SUCCESS: + if (TRB_LEN(le32_to_cpu(event->transfer_len)) == 0) + break; + if (xhci->quirks & XHCI_TRUST_TX_LENGTH) + trb_comp_code = COMP_SHORT_TX; + else + xhci_warn(xhci, "WARN Successful completion on short TX: " + "needs XHCI_TRUST_TX_LENGTH quirk?\n"); case COMP_SHORT_TX: break; case COMP_STOP: @@ -2270,7 +2286,7 @@ cleanup: (status != 0 && !usb_endpoint_xfer_isoc(&urb->ep->desc))) xhci_dbg(xhci, "Giveback URB %p, len = %d, " - "expected = %x, status = %d\n", + "expected = %d, status = %d\n", urb, urb->actual_length, urb->transfer_buffer_length, status); @@ -2417,7 +2433,7 @@ hw_died: u32 irq_pending; /* Acknowledge the PCI interrupt */ irq_pending = xhci_readl(xhci, &xhci->ir_set->irq_pending); - irq_pending |= 0x3; + irq_pending |= IMAN_IP; xhci_writel(xhci, irq_pending, &xhci->ir_set->irq_pending); } @@ -2734,7 +2750,7 @@ int xhci_queue_intr_tx(struct xhci_hcd *xhci, gfp_t mem_flags, urb->dev->speed == USB_SPEED_FULL) urb->interval /= 8; } - return xhci_queue_bulk_tx(xhci, GFP_ATOMIC, urb, slot_id, ep_index); + return xhci_queue_bulk_tx(xhci, mem_flags, urb, slot_id, ep_index); } /* @@ -3514,7 +3530,7 @@ int xhci_queue_isoc_tx_prepare(struct xhci_hcd *xhci, gfp_t mem_flags, } ep_ring->num_trbs_free_temp = ep_ring->num_trbs_free; - return xhci_queue_isoc_tx(xhci, GFP_ATOMIC, urb, slot_id, ep_index); + return xhci_queue_isoc_tx(xhci, mem_flags, urb, slot_id, ep_index); } /**** Command Ring Operations ****/ @@ -3593,12 +3609,12 @@ int xhci_queue_configure_endpoint(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr, /* Queue an evaluate context command TRB */ int xhci_queue_evaluate_context(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr, - u32 slot_id) + u32 slot_id, bool command_must_succeed) { return queue_command(xhci, lower_32_bits(in_ctx_ptr), upper_32_bits(in_ctx_ptr), 0, TRB_TYPE(TRB_EVAL_CONTEXT) | SLOT_ID_FOR_TRB(slot_id), - false); + command_must_succeed); } /* diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index e1963d4a430..afdc73ee84a 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -106,6 +106,9 @@ int xhci_halt(struct xhci_hcd *xhci) STS_HALT, STS_HALT, XHCI_MAX_HALT_USEC); if (!ret) xhci->xhc_state |= XHCI_STATE_HALTED; + else + xhci_warn(xhci, "Host not halted after %u microseconds.\n", + XHCI_MAX_HALT_USEC); return ret; } @@ -149,7 +152,7 @@ int xhci_reset(struct xhci_hcd *xhci) { u32 command; u32 state; - int ret; + int ret, i; state = xhci_readl(xhci, &xhci->op_regs->status); if ((state & STS_HALT) == 0) { @@ -172,7 +175,15 @@ int xhci_reset(struct xhci_hcd *xhci) * xHCI cannot write to any doorbells or operational registers other * than status until the "Controller Not Ready" flag is cleared. */ - return handshake(xhci, &xhci->op_regs->status, STS_CNR, 0, 250 * 1000); + ret = handshake(xhci, &xhci->op_regs->status, STS_CNR, 0, 250 * 1000); + + for (i = 0; i < 2; ++i) { + xhci->bus_state[i].port_c_suspend = 0; + xhci->bus_state[i].suspended_ports = 0; + xhci->bus_state[i].resuming_ports = 0; + } + + return ret; } #ifdef CONFIG_PCI @@ -664,11 +675,11 @@ static void xhci_save_registers(struct xhci_hcd *xhci) xhci->s3.dev_nt = xhci_readl(xhci, &xhci->op_regs->dev_notification); xhci->s3.dcbaa_ptr = xhci_read_64(xhci, &xhci->op_regs->dcbaa_ptr); xhci->s3.config_reg = xhci_readl(xhci, &xhci->op_regs->config_reg); - xhci->s3.irq_pending = xhci_readl(xhci, &xhci->ir_set->irq_pending); - xhci->s3.irq_control = xhci_readl(xhci, &xhci->ir_set->irq_control); xhci->s3.erst_size = xhci_readl(xhci, &xhci->ir_set->erst_size); xhci->s3.erst_base = xhci_read_64(xhci, &xhci->ir_set->erst_base); xhci->s3.erst_dequeue = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue); + xhci->s3.irq_pending = xhci_readl(xhci, &xhci->ir_set->irq_pending); + xhci->s3.irq_control = xhci_readl(xhci, &xhci->ir_set->irq_control); } static void xhci_restore_registers(struct xhci_hcd *xhci) @@ -677,10 +688,11 @@ static void xhci_restore_registers(struct xhci_hcd *xhci) xhci_writel(xhci, xhci->s3.dev_nt, &xhci->op_regs->dev_notification); xhci_write_64(xhci, xhci->s3.dcbaa_ptr, &xhci->op_regs->dcbaa_ptr); xhci_writel(xhci, xhci->s3.config_reg, &xhci->op_regs->config_reg); - xhci_writel(xhci, xhci->s3.irq_pending, &xhci->ir_set->irq_pending); - xhci_writel(xhci, xhci->s3.irq_control, &xhci->ir_set->irq_control); xhci_writel(xhci, xhci->s3.erst_size, &xhci->ir_set->erst_size); xhci_write_64(xhci, xhci->s3.erst_base, &xhci->ir_set->erst_base); + xhci_write_64(xhci, xhci->s3.erst_dequeue, &xhci->ir_set->erst_dequeue); + xhci_writel(xhci, xhci->s3.irq_pending, &xhci->ir_set->irq_pending); + xhci_writel(xhci, xhci->s3.irq_control, &xhci->ir_set->irq_control); } static void xhci_set_cmd_ring_deq(struct xhci_hcd *xhci) @@ -2434,7 +2446,7 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci, udev->slot_id, must_succeed); else ret = xhci_queue_evaluate_context(xhci, in_ctx->dma, - udev->slot_id); + udev->slot_id, must_succeed); if (ret < 0) { if (command) list_del(&command->cmd_list); @@ -3859,6 +3871,474 @@ int xhci_update_device(struct usb_hcd *hcd, struct usb_device *udev) #endif /* CONFIG_USB_SUSPEND */ +/*---------------------- USB 3.0 Link PM functions ------------------------*/ + +#ifdef CONFIG_PM +/* Service interval in nanoseconds = 2^(bInterval - 1) * 125us * 1000ns / 1us */ +static unsigned long long xhci_service_interval_to_ns( + struct usb_endpoint_descriptor *desc) +{ + return (1 << (desc->bInterval - 1)) * 125 * 1000; +} + +static u16 xhci_get_timeout_no_hub_lpm(struct usb_device *udev, + enum usb3_link_state state) +{ + unsigned long long sel; + unsigned long long pel; + unsigned int max_sel_pel; + char *state_name; + + switch (state) { + case USB3_LPM_U1: + /* Convert SEL and PEL stored in nanoseconds to microseconds */ + sel = DIV_ROUND_UP(udev->u1_params.sel, 1000); + pel = DIV_ROUND_UP(udev->u1_params.pel, 1000); + max_sel_pel = USB3_LPM_MAX_U1_SEL_PEL; + state_name = "U1"; + break; + case USB3_LPM_U2: + sel = DIV_ROUND_UP(udev->u2_params.sel, 1000); + pel = DIV_ROUND_UP(udev->u2_params.pel, 1000); + max_sel_pel = USB3_LPM_MAX_U2_SEL_PEL; + state_name = "U2"; + break; + default: + dev_warn(&udev->dev, "%s: Can't get timeout for non-U1 or U2 state.\n", + __func__); + return -EINVAL; + } + + if (sel <= max_sel_pel && pel <= max_sel_pel) + return USB3_LPM_DEVICE_INITIATED; + + if (sel > max_sel_pel) + dev_dbg(&udev->dev, "Device-initiated %s disabled " + "due to long SEL %llu ms\n", + state_name, sel); + else + dev_dbg(&udev->dev, "Device-initiated %s disabled " + "due to long PEL %llu\n ms", + state_name, pel); + return USB3_LPM_DISABLED; +} + +/* Returns the hub-encoded U1 timeout value. + * The U1 timeout should be the maximum of the following values: + * - For control endpoints, U1 system exit latency (SEL) * 3 + * - For bulk endpoints, U1 SEL * 5 + * - For interrupt endpoints: + * - Notification EPs, U1 SEL * 3 + * - Periodic EPs, max(105% of bInterval, U1 SEL * 2) + * - For isochronous endpoints, max(105% of bInterval, U1 SEL * 2) + */ +static u16 xhci_calculate_intel_u1_timeout(struct usb_device *udev, + struct usb_endpoint_descriptor *desc) +{ + unsigned long long timeout_ns; + int ep_type; + int intr_type; + + ep_type = usb_endpoint_type(desc); + switch (ep_type) { + case USB_ENDPOINT_XFER_CONTROL: + timeout_ns = udev->u1_params.sel * 3; + break; + case USB_ENDPOINT_XFER_BULK: + timeout_ns = udev->u1_params.sel * 5; + break; + case USB_ENDPOINT_XFER_INT: + intr_type = usb_endpoint_interrupt_type(desc); + if (intr_type == USB_ENDPOINT_INTR_NOTIFICATION) { + timeout_ns = udev->u1_params.sel * 3; + break; + } + /* Otherwise the calculation is the same as isoc eps */ + case USB_ENDPOINT_XFER_ISOC: + timeout_ns = xhci_service_interval_to_ns(desc); + timeout_ns = DIV_ROUND_UP_ULL(timeout_ns * 105, 100); + if (timeout_ns < udev->u1_params.sel * 2) + timeout_ns = udev->u1_params.sel * 2; + break; + default: + return 0; + } + + /* The U1 timeout is encoded in 1us intervals. */ + timeout_ns = DIV_ROUND_UP_ULL(timeout_ns, 1000); + /* Don't return a timeout of zero, because that's USB3_LPM_DISABLED. */ + if (timeout_ns == USB3_LPM_DISABLED) + timeout_ns++; + + /* If the necessary timeout value is bigger than what we can set in the + * USB 3.0 hub, we have to disable hub-initiated U1. + */ + if (timeout_ns <= USB3_LPM_U1_MAX_TIMEOUT) + return timeout_ns; + dev_dbg(&udev->dev, "Hub-initiated U1 disabled " + "due to long timeout %llu ms\n", timeout_ns); + return xhci_get_timeout_no_hub_lpm(udev, USB3_LPM_U1); +} + +/* Returns the hub-encoded U2 timeout value. + * The U2 timeout should be the maximum of: + * - 10 ms (to avoid the bandwidth impact on the scheduler) + * - largest bInterval of any active periodic endpoint (to avoid going + * into lower power link states between intervals). + * - the U2 Exit Latency of the device + */ +static u16 xhci_calculate_intel_u2_timeout(struct usb_device *udev, + struct usb_endpoint_descriptor *desc) +{ + unsigned long long timeout_ns; + unsigned long long u2_del_ns; + + timeout_ns = 10 * 1000 * 1000; + + if ((usb_endpoint_xfer_int(desc) || usb_endpoint_xfer_isoc(desc)) && + (xhci_service_interval_to_ns(desc) > timeout_ns)) + timeout_ns = xhci_service_interval_to_ns(desc); + + u2_del_ns = udev->bos->ss_cap->bU2DevExitLat * 1000; + if (u2_del_ns > timeout_ns) + timeout_ns = u2_del_ns; + + /* The U2 timeout is encoded in 256us intervals */ + timeout_ns = DIV_ROUND_UP_ULL(timeout_ns, 256 * 1000); + /* If the necessary timeout value is bigger than what we can set in the + * USB 3.0 hub, we have to disable hub-initiated U2. + */ + if (timeout_ns <= USB3_LPM_U2_MAX_TIMEOUT) + return timeout_ns; + dev_dbg(&udev->dev, "Hub-initiated U2 disabled " + "due to long timeout %llu ms\n", timeout_ns); + return xhci_get_timeout_no_hub_lpm(udev, USB3_LPM_U2); +} + +static u16 xhci_call_host_update_timeout_for_endpoint(struct xhci_hcd *xhci, + struct usb_device *udev, + struct usb_endpoint_descriptor *desc, + enum usb3_link_state state, + u16 *timeout) +{ + if (state == USB3_LPM_U1) { + if (xhci->quirks & XHCI_INTEL_HOST) + return xhci_calculate_intel_u1_timeout(udev, desc); + } else { + if (xhci->quirks & XHCI_INTEL_HOST) + return xhci_calculate_intel_u2_timeout(udev, desc); + } + + return USB3_LPM_DISABLED; +} + +static int xhci_update_timeout_for_endpoint(struct xhci_hcd *xhci, + struct usb_device *udev, + struct usb_endpoint_descriptor *desc, + enum usb3_link_state state, + u16 *timeout) +{ + u16 alt_timeout; + + alt_timeout = xhci_call_host_update_timeout_for_endpoint(xhci, udev, + desc, state, timeout); + + /* If we found we can't enable hub-initiated LPM, or + * the U1 or U2 exit latency was too high to allow + * device-initiated LPM as well, just stop searching. + */ + if (alt_timeout == USB3_LPM_DISABLED || + alt_timeout == USB3_LPM_DEVICE_INITIATED) { + *timeout = alt_timeout; + return -E2BIG; + } + if (alt_timeout > *timeout) + *timeout = alt_timeout; + return 0; +} + +static int xhci_update_timeout_for_interface(struct xhci_hcd *xhci, + struct usb_device *udev, + struct usb_host_interface *alt, + enum usb3_link_state state, + u16 *timeout) +{ + int j; + + for (j = 0; j < alt->desc.bNumEndpoints; j++) { + if (xhci_update_timeout_for_endpoint(xhci, udev, + &alt->endpoint[j].desc, state, timeout)) + return -E2BIG; + continue; + } + return 0; +} + +static int xhci_check_intel_tier_policy(struct usb_device *udev, + enum usb3_link_state state) +{ + struct usb_device *parent; + unsigned int num_hubs; + + if (state == USB3_LPM_U2) + return 0; + + /* Don't enable U1 if the device is on a 2nd tier hub or lower. */ + for (parent = udev->parent, num_hubs = 0; parent->parent; + parent = parent->parent) + num_hubs++; + + if (num_hubs < 2) + return 0; + + dev_dbg(&udev->dev, "Disabling U1 link state for device" + " below second-tier hub.\n"); + dev_dbg(&udev->dev, "Plug device into first-tier hub " + "to decrease power consumption.\n"); + return -E2BIG; +} + +static int xhci_check_tier_policy(struct xhci_hcd *xhci, + struct usb_device *udev, + enum usb3_link_state state) +{ + if (xhci->quirks & XHCI_INTEL_HOST) + return xhci_check_intel_tier_policy(udev, state); + return -EINVAL; +} + +/* Returns the U1 or U2 timeout that should be enabled. + * If the tier check or timeout setting functions return with a non-zero exit + * code, that means the timeout value has been finalized and we shouldn't look + * at any more endpoints. + */ +static u16 xhci_calculate_lpm_timeout(struct usb_hcd *hcd, + struct usb_device *udev, enum usb3_link_state state) +{ + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + struct usb_host_config *config; + char *state_name; + int i; + u16 timeout = USB3_LPM_DISABLED; + + if (state == USB3_LPM_U1) + state_name = "U1"; + else if (state == USB3_LPM_U2) + state_name = "U2"; + else { + dev_warn(&udev->dev, "Can't enable unknown link state %i\n", + state); + return timeout; + } + + if (xhci_check_tier_policy(xhci, udev, state) < 0) + return timeout; + + /* Gather some information about the currently installed configuration + * and alternate interface settings. + */ + if (xhci_update_timeout_for_endpoint(xhci, udev, &udev->ep0.desc, + state, &timeout)) + return timeout; + + config = udev->actconfig; + if (!config) + return timeout; + + for (i = 0; i < USB_MAXINTERFACES; i++) { + struct usb_driver *driver; + struct usb_interface *intf = config->interface[i]; + + if (!intf) + continue; + + /* Check if any currently bound drivers want hub-initiated LPM + * disabled. + */ + if (intf->dev.driver) { + driver = to_usb_driver(intf->dev.driver); + if (driver && driver->disable_hub_initiated_lpm) { + dev_dbg(&udev->dev, "Hub-initiated %s disabled " + "at request of driver %s\n", + state_name, driver->name); + return xhci_get_timeout_no_hub_lpm(udev, state); + } + } + + /* Not sure how this could happen... */ + if (!intf->cur_altsetting) + continue; + + if (xhci_update_timeout_for_interface(xhci, udev, + intf->cur_altsetting, + state, &timeout)) + return timeout; + } + return timeout; +} + +/* + * Issue an Evaluate Context command to change the Maximum Exit Latency in the + * slot context. If that succeeds, store the new MEL in the xhci_virt_device. + */ +static int xhci_change_max_exit_latency(struct xhci_hcd *xhci, + struct usb_device *udev, u16 max_exit_latency) +{ + struct xhci_virt_device *virt_dev; + struct xhci_command *command; + struct xhci_input_control_ctx *ctrl_ctx; + struct xhci_slot_ctx *slot_ctx; + unsigned long flags; + int ret; + + spin_lock_irqsave(&xhci->lock, flags); + if (max_exit_latency == xhci->devs[udev->slot_id]->current_mel) { + spin_unlock_irqrestore(&xhci->lock, flags); + return 0; + } + + /* Attempt to issue an Evaluate Context command to change the MEL. */ + virt_dev = xhci->devs[udev->slot_id]; + command = xhci->lpm_command; + xhci_slot_copy(xhci, command->in_ctx, virt_dev->out_ctx); + spin_unlock_irqrestore(&xhci->lock, flags); + + ctrl_ctx = xhci_get_input_control_ctx(xhci, command->in_ctx); + ctrl_ctx->add_flags |= cpu_to_le32(SLOT_FLAG); + slot_ctx = xhci_get_slot_ctx(xhci, command->in_ctx); + slot_ctx->dev_info2 &= cpu_to_le32(~((u32) MAX_EXIT)); + slot_ctx->dev_info2 |= cpu_to_le32(max_exit_latency); + + xhci_dbg(xhci, "Set up evaluate context for LPM MEL change.\n"); + xhci_dbg(xhci, "Slot %u Input Context:\n", udev->slot_id); + xhci_dbg_ctx(xhci, command->in_ctx, 0); + + /* Issue and wait for the evaluate context command. */ + ret = xhci_configure_endpoint(xhci, udev, command, + true, true); + xhci_dbg(xhci, "Slot %u Output Context:\n", udev->slot_id); + xhci_dbg_ctx(xhci, virt_dev->out_ctx, 0); + + if (!ret) { + spin_lock_irqsave(&xhci->lock, flags); + virt_dev->current_mel = max_exit_latency; + spin_unlock_irqrestore(&xhci->lock, flags); + } + return ret; +} + +static int calculate_max_exit_latency(struct usb_device *udev, + enum usb3_link_state state_changed, + u16 hub_encoded_timeout) +{ + unsigned long long u1_mel_us = 0; + unsigned long long u2_mel_us = 0; + unsigned long long mel_us = 0; + bool disabling_u1; + bool disabling_u2; + bool enabling_u1; + bool enabling_u2; + + disabling_u1 = (state_changed == USB3_LPM_U1 && + hub_encoded_timeout == USB3_LPM_DISABLED); + disabling_u2 = (state_changed == USB3_LPM_U2 && + hub_encoded_timeout == USB3_LPM_DISABLED); + + enabling_u1 = (state_changed == USB3_LPM_U1 && + hub_encoded_timeout != USB3_LPM_DISABLED); + enabling_u2 = (state_changed == USB3_LPM_U2 && + hub_encoded_timeout != USB3_LPM_DISABLED); + + /* If U1 was already enabled and we're not disabling it, + * or we're going to enable U1, account for the U1 max exit latency. + */ + if ((udev->u1_params.timeout != USB3_LPM_DISABLED && !disabling_u1) || + enabling_u1) + u1_mel_us = DIV_ROUND_UP(udev->u1_params.mel, 1000); + if ((udev->u2_params.timeout != USB3_LPM_DISABLED && !disabling_u2) || + enabling_u2) + u2_mel_us = DIV_ROUND_UP(udev->u2_params.mel, 1000); + + if (u1_mel_us > u2_mel_us) + mel_us = u1_mel_us; + else + mel_us = u2_mel_us; + /* xHCI host controller max exit latency field is only 16 bits wide. */ + if (mel_us > MAX_EXIT) { + dev_warn(&udev->dev, "Link PM max exit latency of %lluus " + "is too big.\n", mel_us); + return -E2BIG; + } + return mel_us; +} + +/* Returns the USB3 hub-encoded value for the U1/U2 timeout. */ +int xhci_enable_usb3_lpm_timeout(struct usb_hcd *hcd, + struct usb_device *udev, enum usb3_link_state state) +{ + struct xhci_hcd *xhci; + u16 hub_encoded_timeout; + int mel; + int ret; + + xhci = hcd_to_xhci(hcd); + /* The LPM timeout values are pretty host-controller specific, so don't + * enable hub-initiated timeouts unless the vendor has provided + * information about their timeout algorithm. + */ + if (!xhci || !(xhci->quirks & XHCI_LPM_SUPPORT) || + !xhci->devs[udev->slot_id]) + return USB3_LPM_DISABLED; + + hub_encoded_timeout = xhci_calculate_lpm_timeout(hcd, udev, state); + mel = calculate_max_exit_latency(udev, state, hub_encoded_timeout); + if (mel < 0) { + /* Max Exit Latency is too big, disable LPM. */ + hub_encoded_timeout = USB3_LPM_DISABLED; + mel = 0; + } + + ret = xhci_change_max_exit_latency(xhci, udev, mel); + if (ret) + return ret; + return hub_encoded_timeout; +} + +int xhci_disable_usb3_lpm_timeout(struct usb_hcd *hcd, + struct usb_device *udev, enum usb3_link_state state) +{ + struct xhci_hcd *xhci; + u16 mel; + int ret; + + xhci = hcd_to_xhci(hcd); + if (!xhci || !(xhci->quirks & XHCI_LPM_SUPPORT) || + !xhci->devs[udev->slot_id]) + return 0; + + mel = calculate_max_exit_latency(udev, state, USB3_LPM_DISABLED); + ret = xhci_change_max_exit_latency(xhci, udev, mel); + if (ret) + return ret; + return 0; +} +#else /* CONFIG_PM */ + +int xhci_enable_usb3_lpm_timeout(struct usb_hcd *hcd, + struct usb_device *udev, enum usb3_link_state state) +{ + return USB3_LPM_DISABLED; +} + +int xhci_disable_usb3_lpm_timeout(struct usb_hcd *hcd, + struct usb_device *udev, enum usb3_link_state state) +{ + return 0; +} +#endif /* CONFIG_PM */ + +/*-------------------------------------------------------------------------*/ + /* Once a hub descriptor is fetched for a device, we need to update the xHC's * internal data structures for the device. */ @@ -4086,7 +4566,6 @@ static int __init xhci_hcd_init(void) BUILD_BUG_ON(sizeof(struct xhci_intr_reg) != 8*32/8); /* xhci_run_regs has eight fields and embeds 128 xhci_intr_regs */ BUILD_BUG_ON(sizeof(struct xhci_run_regs) != (8+8*128)*32/8); - BUILD_BUG_ON(sizeof(struct xhci_doorbell_array) != 256*32/8); return 0; unreg_pci: xhci_unregister_pci(); diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 91074fdab3e..de3d6e3e57b 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -205,6 +205,10 @@ struct xhci_op_regs { #define CMD_PM_INDEX (1 << 11) /* bits 12:31 are reserved (and should be preserved on writes). */ +/* IMAN - Interrupt Management Register */ +#define IMAN_IP (1 << 1) +#define IMAN_IE (1 << 0) + /* USBSTS - USB status - status bitmasks */ /* HC not running - set to 1 when run/stop bit is cleared. */ #define STS_HALT XHCI_STS_HALT @@ -358,8 +362,10 @@ struct xhci_op_regs { * Timeout can be up to 127us. 0xFF means an infinite timeout. */ #define PORT_U1_TIMEOUT(p) ((p) & 0xff) +#define PORT_U1_TIMEOUT_MASK 0xff /* Inactivity timer value for transitions into U2 */ #define PORT_U2_TIMEOUT(p) (((p) & 0xff) << 8) +#define PORT_U2_TIMEOUT_MASK (0xff << 8) /* Bits 24:31 for port testing */ /* USB2 Protocol PORTSPMSC */ @@ -910,6 +916,8 @@ struct xhci_virt_device { u8 real_port; struct xhci_interval_bw_table *bw_table; struct xhci_tt_bw_info *tt_info; + /* The current max exit latency for the enabled USB3 link states. */ + u16 current_mel; }; /* @@ -1358,6 +1366,8 @@ struct xhci_bus_state { u32 suspended_ports; u32 port_remote_wakeup; unsigned long resume_done[USB_MAXCHILDREN]; + /* which ports have started to resume */ + unsigned long resuming_ports; }; static inline unsigned int hcd_index(struct usb_hcd *hcd) @@ -1418,6 +1428,8 @@ struct xhci_hcd { /* slot enabling and address device helpers */ struct completion addr_dev; int slot_id; + /* For USB 3.0 LPM enable/disable. */ + struct xhci_command *lpm_command; /* Internal mirror of the HW's dcbaa */ struct xhci_virt_device *devs[MAX_HC_SLOTS]; /* For keeping track of bandwidth domains per roothub. */ @@ -1475,6 +1487,9 @@ struct xhci_hcd { #define XHCI_RESET_ON_RESUME (1 << 7) #define XHCI_SW_BW_CHECKING (1 << 8) #define XHCI_AMD_0x96_HOST (1 << 9) +#define XHCI_TRUST_TX_LENGTH (1 << 10) +#define XHCI_LPM_SUPPORT (1 << 11) +#define XHCI_INTEL_HOST (1 << 12) unsigned int num_active_eps; unsigned int limit_active_eps; /* There are two roothubs to keep track of bus suspend info for */ @@ -1748,7 +1763,7 @@ int xhci_queue_isoc_tx_prepare(struct xhci_hcd *xhci, gfp_t mem_flags, int xhci_queue_configure_endpoint(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr, u32 slot_id, bool command_must_succeed); int xhci_queue_evaluate_context(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr, - u32 slot_id); + u32 slot_id, bool command_must_succeed); int xhci_queue_reset_ep(struct xhci_hcd *xhci, int slot_id, unsigned int ep_index); int xhci_queue_reset_device(struct xhci_hcd *xhci, u32 slot_id); @@ -1772,6 +1787,10 @@ void xhci_ring_ep_doorbell(struct xhci_hcd *xhci, unsigned int slot_id, /* xHCI roothub code */ void xhci_set_link_state(struct xhci_hcd *xhci, __le32 __iomem **port_array, int port_id, u32 link_state); +int xhci_enable_usb3_lpm_timeout(struct usb_hcd *hcd, + struct usb_device *udev, enum usb3_link_state state); +int xhci_disable_usb3_lpm_timeout(struct usb_hcd *hcd, + struct usb_device *udev, enum usb3_link_state state); void xhci_test_and_clear_bit(struct xhci_hcd *xhci, __le32 __iomem **port_array, int port_id, u32 port_bit); int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex, |