summaryrefslogtreecommitdiffstats
path: root/drivers/usb/host
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/host')
-rw-r--r--drivers/usb/host/ehci-hub.c24
-rw-r--r--drivers/usb/host/isp1362-hcd.c2
-rw-r--r--drivers/usb/host/isp1760-hcd.c18
-rw-r--r--drivers/usb/host/oxu210hp-hcd.c24
-rw-r--r--drivers/usb/host/r8a66597-hcd.c30
-rw-r--r--drivers/usb/host/sl811-hcd.c52
-rw-r--r--drivers/usb/host/xhci-hub.c16
7 files changed, 83 insertions, 83 deletions
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index c7178bcde67..c44018109a1 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -659,7 +659,7 @@ static int ehci_hub_control (
* Even if OWNER is set, so the port is owned by the
* companion controller, khubd needs to be able to clear
* the port-change status bits (especially
- * USB_PORT_FEAT_C_CONNECTION).
+ * USB_PORT_STAT_C_CONNECTION).
*/
switch (wValue) {
@@ -729,12 +729,12 @@ static int ehci_hub_control (
// wPortChange bits
if (temp & PORT_CSC)
- status |= 1 << USB_PORT_FEAT_C_CONNECTION;
+ status |= USB_PORT_STAT_C_CONNECTION << 16;
if (temp & PORT_PEC)
- status |= 1 << USB_PORT_FEAT_C_ENABLE;
+ status |= USB_PORT_STAT_C_ENABLE << 16;
if ((temp & PORT_OCC) && !ignore_oc){
- status |= 1 << USB_PORT_FEAT_C_OVER_CURRENT;
+ status |= USB_PORT_STAT_C_OVERCURRENT << 16;
/*
* Hubs should disable port power on over-current.
@@ -791,7 +791,7 @@ static int ehci_hub_control (
if ((temp & PORT_RESET)
&& time_after_eq(jiffies,
ehci->reset_done[wIndex])) {
- status |= 1 << USB_PORT_FEAT_C_RESET;
+ status |= USB_PORT_STAT_C_RESET << 16;
ehci->reset_done [wIndex] = 0;
/* force reset to complete */
@@ -833,7 +833,7 @@ static int ehci_hub_control (
*/
if (temp & PORT_CONNECT) {
- status |= 1 << USB_PORT_FEAT_CONNECTION;
+ status |= USB_PORT_STAT_CONNECTION;
// status may be from integrated TT
if (ehci->has_hostpc) {
temp1 = ehci_readl(ehci, hostpc_reg);
@@ -842,11 +842,11 @@ static int ehci_hub_control (
status |= ehci_port_speed(ehci, temp);
}
if (temp & PORT_PE)
- status |= 1 << USB_PORT_FEAT_ENABLE;
+ status |= USB_PORT_STAT_ENABLE;
/* maybe the port was unsuspended without our knowledge */
if (temp & (PORT_SUSPEND|PORT_RESUME)) {
- status |= 1 << USB_PORT_FEAT_SUSPEND;
+ status |= USB_PORT_STAT_SUSPEND;
} else if (test_bit(wIndex, &ehci->suspended_ports)) {
clear_bit(wIndex, &ehci->suspended_ports);
ehci->reset_done[wIndex] = 0;
@@ -855,13 +855,13 @@ static int ehci_hub_control (
}
if (temp & PORT_OC)
- status |= 1 << USB_PORT_FEAT_OVER_CURRENT;
+ status |= USB_PORT_STAT_OVERCURRENT;
if (temp & PORT_RESET)
- status |= 1 << USB_PORT_FEAT_RESET;
+ status |= USB_PORT_STAT_RESET;
if (temp & PORT_POWER)
- status |= 1 << USB_PORT_FEAT_POWER;
+ status |= USB_PORT_STAT_POWER;
if (test_bit(wIndex, &ehci->port_c_suspend))
- status |= 1 << USB_PORT_FEAT_C_SUSPEND;
+ status |= USB_PORT_STAT_C_SUSPEND << 16;
#ifndef VERBOSE_DEBUG
if (status & ~0xffff) /* only if wPortChange is interesting */
diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c
index acc157da727..6a6a50849bf 100644
--- a/drivers/usb/host/isp1362-hcd.c
+++ b/drivers/usb/host/isp1362-hcd.c
@@ -1265,7 +1265,7 @@ static int isp1362_urb_enqueue(struct usb_hcd *hcd,
/* don't submit to a dead or disabled port */
if (!((isp1362_hcd->rhport[0] | isp1362_hcd->rhport[1]) &
- (1 << USB_PORT_FEAT_ENABLE)) ||
+ USB_PORT_STAT_ENABLE) ||
!HC_IS_RUNNING(hcd->state)) {
kfree(ep);
retval = -ENODEV;
diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c
index cfdac6da955..13f7d1200bc 100644
--- a/drivers/usb/host/isp1760-hcd.c
+++ b/drivers/usb/host/isp1760-hcd.c
@@ -1923,7 +1923,7 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq,
* Even if OWNER is set, so the port is owned by the
* companion controller, khubd needs to be able to clear
* the port-change status bits (especially
- * USB_PORT_FEAT_C_CONNECTION).
+ * USB_PORT_STAT_C_CONNECTION).
*/
switch (wValue) {
@@ -1987,7 +1987,7 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq,
/* wPortChange bits */
if (temp & PORT_CSC)
- status |= 1 << USB_PORT_FEAT_C_CONNECTION;
+ status |= USB_PORT_STAT_C_CONNECTION << 16;
/* whoever resumes must GetPortStatus to complete it!! */
@@ -2007,7 +2007,7 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq,
/* resume completed? */
else if (time_after_eq(jiffies,
priv->reset_done)) {
- status |= 1 << USB_PORT_FEAT_C_SUSPEND;
+ status |= USB_PORT_STAT_C_SUSPEND << 16;
priv->reset_done = 0;
/* stop resume signaling */
@@ -2031,7 +2031,7 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq,
if ((temp & PORT_RESET)
&& time_after_eq(jiffies,
priv->reset_done)) {
- status |= 1 << USB_PORT_FEAT_C_RESET;
+ status |= USB_PORT_STAT_C_RESET << 16;
priv->reset_done = 0;
/* force reset to complete */
@@ -2062,18 +2062,18 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq,
printk(KERN_ERR "Warning: PORT_OWNER is set\n");
if (temp & PORT_CONNECT) {
- status |= 1 << USB_PORT_FEAT_CONNECTION;
+ status |= USB_PORT_STAT_CONNECTION;
/* status may be from integrated TT */
status |= ehci_port_speed(priv, temp);
}
if (temp & PORT_PE)
- status |= 1 << USB_PORT_FEAT_ENABLE;
+ status |= USB_PORT_STAT_ENABLE;
if (temp & (PORT_SUSPEND|PORT_RESUME))
- status |= 1 << USB_PORT_FEAT_SUSPEND;
+ status |= USB_PORT_STAT_SUSPEND;
if (temp & PORT_RESET)
- status |= 1 << USB_PORT_FEAT_RESET;
+ status |= USB_PORT_STAT_RESET;
if (temp & PORT_POWER)
- status |= 1 << USB_PORT_FEAT_POWER;
+ status |= USB_PORT_STAT_POWER;
put_unaligned(cpu_to_le32(status), (__le32 *) buf);
break;
diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c
index 8f04c0afa59..f608dfd09a8 100644
--- a/drivers/usb/host/oxu210hp-hcd.c
+++ b/drivers/usb/host/oxu210hp-hcd.c
@@ -3201,7 +3201,7 @@ static int oxu_hub_control(struct usb_hcd *hcd, u16 typeReq,
* Even if OWNER is set, so the port is owned by the
* companion controller, khubd needs to be able to clear
* the port-change status bits (especially
- * USB_PORT_FEAT_C_CONNECTION).
+ * USB_PORT_STAT_C_CONNECTION).
*/
switch (wValue) {
@@ -3263,11 +3263,11 @@ static int oxu_hub_control(struct usb_hcd *hcd, u16 typeReq,
/* wPortChange bits */
if (temp & PORT_CSC)
- status |= 1 << USB_PORT_FEAT_C_CONNECTION;
+ status |= USB_PORT_STAT_C_CONNECTION << 16;
if (temp & PORT_PEC)
- status |= 1 << USB_PORT_FEAT_C_ENABLE;
+ status |= USB_PORT_STAT_C_ENABLE << 16;
if ((temp & PORT_OCC) && !ignore_oc)
- status |= 1 << USB_PORT_FEAT_C_OVER_CURRENT;
+ status |= USB_PORT_STAT_C_OVERCURRENT << 16;
/* whoever resumes must GetPortStatus to complete it!! */
if (temp & PORT_RESUME) {
@@ -3285,7 +3285,7 @@ static int oxu_hub_control(struct usb_hcd *hcd, u16 typeReq,
/* resume completed? */
else if (time_after_eq(jiffies,
oxu->reset_done[wIndex])) {
- status |= 1 << USB_PORT_FEAT_C_SUSPEND;
+ status |= USB_PORT_STAT_C_SUSPEND << 16;
oxu->reset_done[wIndex] = 0;
/* stop resume signaling */
@@ -3308,7 +3308,7 @@ static int oxu_hub_control(struct usb_hcd *hcd, u16 typeReq,
if ((temp & PORT_RESET)
&& time_after_eq(jiffies,
oxu->reset_done[wIndex])) {
- status |= 1 << USB_PORT_FEAT_C_RESET;
+ status |= USB_PORT_STAT_C_RESET << 16;
oxu->reset_done[wIndex] = 0;
/* force reset to complete */
@@ -3347,20 +3347,20 @@ static int oxu_hub_control(struct usb_hcd *hcd, u16 typeReq,
*/
if (temp & PORT_CONNECT) {
- status |= 1 << USB_PORT_FEAT_CONNECTION;
+ status |= USB_PORT_STAT_CONNECTION;
/* status may be from integrated TT */
status |= oxu_port_speed(oxu, temp);
}
if (temp & PORT_PE)
- status |= 1 << USB_PORT_FEAT_ENABLE;
+ status |= USB_PORT_STAT_ENABLE;
if (temp & (PORT_SUSPEND|PORT_RESUME))
- status |= 1 << USB_PORT_FEAT_SUSPEND;
+ status |= USB_PORT_STAT_SUSPEND;
if (temp & PORT_OC)
- status |= 1 << USB_PORT_FEAT_OVER_CURRENT;
+ status |= USB_PORT_STAT_OVERCURRENT;
if (temp & PORT_RESET)
- status |= 1 << USB_PORT_FEAT_RESET;
+ status |= USB_PORT_STAT_RESET;
if (temp & PORT_POWER)
- status |= 1 << USB_PORT_FEAT_POWER;
+ status |= USB_PORT_STAT_POWER;
#ifndef OXU_VERBOSE_DEBUG
if (status & ~0xffff) /* only if wPortChange is interesting */
diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index a004a122084..6db57ab6079 100644
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -1018,10 +1018,10 @@ static void start_root_hub_sampling(struct r8a66597 *r8a66597, int port,
rh->old_syssts = r8a66597_read(r8a66597, get_syssts_reg(port)) & LNST;
rh->scount = R8A66597_MAX_SAMPLING;
if (connect)
- rh->port |= 1 << USB_PORT_FEAT_CONNECTION;
+ rh->port |= USB_PORT_STAT_CONNECTION;
else
- rh->port &= ~(1 << USB_PORT_FEAT_CONNECTION);
- rh->port |= 1 << USB_PORT_FEAT_C_CONNECTION;
+ rh->port &= ~USB_PORT_STAT_CONNECTION;
+ rh->port |= USB_PORT_STAT_C_CONNECTION << 16;
r8a66597_root_hub_start_polling(r8a66597);
}
@@ -1065,8 +1065,8 @@ static void r8a66597_usb_connect(struct r8a66597 *r8a66597, int port)
else if (speed == LSMODE)
rh->port |= USB_PORT_STAT_LOW_SPEED;
- rh->port &= ~(1 << USB_PORT_FEAT_RESET);
- rh->port |= 1 << USB_PORT_FEAT_ENABLE;
+ rh->port &= USB_PORT_STAT_RESET;
+ rh->port |= USB_PORT_STAT_ENABLE;
}
/* this function must be called with interrupt disabled */
@@ -1705,7 +1705,7 @@ static void r8a66597_root_hub_control(struct r8a66597 *r8a66597, int port)
u16 tmp;
struct r8a66597_root_hub *rh = &r8a66597->root_hub[port];
- if (rh->port & (1 << USB_PORT_FEAT_RESET)) {
+ if (rh->port & USB_PORT_STAT_RESET) {
unsigned long dvstctr_reg = get_dvstctr_reg(port);
tmp = r8a66597_read(r8a66597, dvstctr_reg);
@@ -1717,7 +1717,7 @@ static void r8a66597_root_hub_control(struct r8a66597 *r8a66597, int port)
r8a66597_usb_connect(r8a66597, port);
}
- if (!(rh->port & (1 << USB_PORT_FEAT_CONNECTION))) {
+ if (!(rh->port & USB_PORT_STAT_CONNECTION)) {
r8a66597_write(r8a66597, ~ATTCH, get_intsts_reg(port));
r8a66597_bset(r8a66597, ATTCHE, get_intenb_reg(port));
}
@@ -2185,7 +2185,7 @@ static int r8a66597_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
switch (wValue) {
case USB_PORT_FEAT_ENABLE:
- rh->port &= ~(1 << USB_PORT_FEAT_POWER);
+ rh->port &= ~USB_PORT_STAT_POWER;
break;
case USB_PORT_FEAT_SUSPEND:
break;
@@ -2226,12 +2226,12 @@ static int r8a66597_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
break;
case USB_PORT_FEAT_POWER:
r8a66597_port_power(r8a66597, port, 1);
- rh->port |= (1 << USB_PORT_FEAT_POWER);
+ rh->port |= USB_PORT_STAT_POWER;
break;
case USB_PORT_FEAT_RESET: {
struct r8a66597_device *dev = rh->dev;
- rh->port |= (1 << USB_PORT_FEAT_RESET);
+ rh->port |= USB_PORT_STAT_RESET;
disable_r8a66597_pipe_all(r8a66597, dev);
free_usb_address(r8a66597, dev, 1);
@@ -2269,12 +2269,12 @@ static int r8a66597_bus_suspend(struct usb_hcd *hcd)
struct r8a66597_root_hub *rh = &r8a66597->root_hub[port];
unsigned long dvstctr_reg = get_dvstctr_reg(port);
- if (!(rh->port & (1 << USB_PORT_FEAT_ENABLE)))
+ if (!(rh->port & USB_PORT_STAT_ENABLE))
continue;
dbg("suspend port = %d", port);
r8a66597_bclr(r8a66597, UACT, dvstctr_reg); /* suspend */
- rh->port |= 1 << USB_PORT_FEAT_SUSPEND;
+ rh->port |= USB_PORT_STAT_SUSPEND;
if (rh->dev->udev->do_remote_wakeup) {
msleep(3); /* waiting last SOF */
@@ -2300,12 +2300,12 @@ static int r8a66597_bus_resume(struct usb_hcd *hcd)
struct r8a66597_root_hub *rh = &r8a66597->root_hub[port];
unsigned long dvstctr_reg = get_dvstctr_reg(port);
- if (!(rh->port & (1 << USB_PORT_FEAT_SUSPEND)))
+ if (!(rh->port & USB_PORT_STAT_SUSPEND))
continue;
dbg("resume port = %d", port);
- rh->port &= ~(1 << USB_PORT_FEAT_SUSPEND);
- rh->port |= 1 << USB_PORT_FEAT_C_SUSPEND;
+ rh->port &= ~USB_PORT_STAT_SUSPEND;
+ rh->port |= USB_PORT_STAT_C_SUSPEND < 16;
r8a66597_mdfy(r8a66597, RESUME, RESUME | UACT, dvstctr_reg);
msleep(50);
r8a66597_mdfy(r8a66597, UACT, RESUME | UACT, dvstctr_reg);
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index dcd7fab7179..bcf9f0e809d 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -90,10 +90,10 @@ static void port_power(struct sl811 *sl811, int is_on)
/* hub is inactive unless the port is powered */
if (is_on) {
- if (sl811->port1 & (1 << USB_PORT_FEAT_POWER))
+ if (sl811->port1 & USB_PORT_STAT_POWER)
return;
- sl811->port1 = (1 << USB_PORT_FEAT_POWER);
+ sl811->port1 = USB_PORT_STAT_POWER;
sl811->irq_enable = SL11H_INTMASK_INSRMV;
} else {
sl811->port1 = 0;
@@ -407,7 +407,7 @@ static struct sl811h_ep *start(struct sl811 *sl811, u8 bank)
static inline void start_transfer(struct sl811 *sl811)
{
- if (sl811->port1 & (1 << USB_PORT_FEAT_SUSPEND))
+ if (sl811->port1 & USB_PORT_STAT_SUSPEND)
return;
if (sl811->active_a == NULL) {
sl811->active_a = start(sl811, SL811_EP_A(SL811_HOST_BUF));
@@ -721,23 +721,23 @@ retry:
* force the reset and make khubd clean up later.
*/
if (irqstat & SL11H_INTMASK_RD)
- sl811->port1 &= ~(1 << USB_PORT_FEAT_CONNECTION);
+ sl811->port1 &= ~USB_PORT_STAT_CONNECTION;
else
- sl811->port1 |= 1 << USB_PORT_FEAT_CONNECTION;
+ sl811->port1 |= USB_PORT_STAT_CONNECTION;
- sl811->port1 |= 1 << USB_PORT_FEAT_C_CONNECTION;
+ sl811->port1 |= USB_PORT_STAT_C_CONNECTION << 16;
} else if (irqstat & SL11H_INTMASK_RD) {
- if (sl811->port1 & (1 << USB_PORT_FEAT_SUSPEND)) {
+ if (sl811->port1 & USB_PORT_STAT_SUSPEND) {
DBG("wakeup\n");
- sl811->port1 |= 1 << USB_PORT_FEAT_C_SUSPEND;
+ sl811->port1 |= USB_PORT_STAT_C_SUSPEND << 16;
sl811->stat_wake++;
} else
irqstat &= ~SL11H_INTMASK_RD;
}
if (irqstat) {
- if (sl811->port1 & (1 << USB_PORT_FEAT_ENABLE))
+ if (sl811->port1 & USB_PORT_STAT_ENABLE)
start_transfer(sl811);
ret = IRQ_HANDLED;
if (retries--)
@@ -819,7 +819,7 @@ static int sl811h_urb_enqueue(
spin_lock_irqsave(&sl811->lock, flags);
/* don't submit to a dead or disabled port */
- if (!(sl811->port1 & (1 << USB_PORT_FEAT_ENABLE))
+ if (!(sl811->port1 & USB_PORT_STAT_ENABLE)
|| !HC_IS_RUNNING(hcd->state)) {
retval = -ENODEV;
kfree(ep);
@@ -1119,8 +1119,8 @@ sl811h_timer(unsigned long _sl811)
unsigned long flags;
u8 irqstat;
u8 signaling = sl811->ctrl1 & SL11H_CTL1MASK_FORCE;
- const u32 mask = (1 << USB_PORT_FEAT_CONNECTION)
- | (1 << USB_PORT_FEAT_ENABLE)
+ const u32 mask = USB_PORT_STAT_CONNECTION
+ | USB_PORT_STAT_ENABLE
| USB_PORT_STAT_LOW_SPEED;
spin_lock_irqsave(&sl811->lock, flags);
@@ -1135,8 +1135,8 @@ sl811h_timer(unsigned long _sl811)
switch (signaling) {
case SL11H_CTL1MASK_SE0:
DBG("end reset\n");
- sl811->port1 = (1 << USB_PORT_FEAT_C_RESET)
- | (1 << USB_PORT_FEAT_POWER);
+ sl811->port1 = (USB_PORT_STAT_C_RESET << 16)
+ | USB_PORT_STAT_POWER;
sl811->ctrl1 = 0;
/* don't wrongly ack RD */
if (irqstat & SL11H_INTMASK_INSRMV)
@@ -1144,7 +1144,7 @@ sl811h_timer(unsigned long _sl811)
break;
case SL11H_CTL1MASK_K:
DBG("end resume\n");
- sl811->port1 &= ~(1 << USB_PORT_FEAT_SUSPEND);
+ sl811->port1 &= ~USB_PORT_STAT_SUSPEND;
break;
default:
DBG("odd timer signaling: %02x\n", signaling);
@@ -1154,9 +1154,9 @@ sl811h_timer(unsigned long _sl811)
if (irqstat & SL11H_INTMASK_RD) {
/* usbcore nukes all pending transactions on disconnect */
- if (sl811->port1 & (1 << USB_PORT_FEAT_CONNECTION))
- sl811->port1 |= (1 << USB_PORT_FEAT_C_CONNECTION)
- | (1 << USB_PORT_FEAT_C_ENABLE);
+ if (sl811->port1 & USB_PORT_STAT_CONNECTION)
+ sl811->port1 |= (USB_PORT_STAT_C_CONNECTION << 16)
+ | (USB_PORT_STAT_C_ENABLE << 16);
sl811->port1 &= ~mask;
sl811->irq_enable = SL11H_INTMASK_INSRMV;
} else {
@@ -1166,7 +1166,7 @@ sl811h_timer(unsigned long _sl811)
sl811->irq_enable = SL11H_INTMASK_INSRMV | SL11H_INTMASK_RD;
}
- if (sl811->port1 & (1 << USB_PORT_FEAT_CONNECTION)) {
+ if (sl811->port1 & USB_PORT_STAT_CONNECTION) {
u8 ctrl2 = SL811HS_CTL2_INIT;
sl811->irq_enable |= SL11H_INTMASK_DONE_A;
@@ -1233,7 +1233,7 @@ sl811h_hub_control(
switch (wValue) {
case USB_PORT_FEAT_ENABLE:
- sl811->port1 &= (1 << USB_PORT_FEAT_POWER);
+ sl811->port1 &= USB_PORT_STAT_POWER;
sl811->ctrl1 = 0;
sl811_write(sl811, SL11H_CTLREG1, sl811->ctrl1);
sl811->irq_enable = SL11H_INTMASK_INSRMV;
@@ -1241,7 +1241,7 @@ sl811h_hub_control(
sl811->irq_enable);
break;
case USB_PORT_FEAT_SUSPEND:
- if (!(sl811->port1 & (1 << USB_PORT_FEAT_SUSPEND)))
+ if (!(sl811->port1 & USB_PORT_STAT_SUSPEND))
break;
/* 20 msec of resume/K signaling, other irqs blocked */
@@ -1290,9 +1290,9 @@ sl811h_hub_control(
goto error;
switch (wValue) {
case USB_PORT_FEAT_SUSPEND:
- if (sl811->port1 & (1 << USB_PORT_FEAT_RESET))
+ if (sl811->port1 & USB_PORT_STAT_RESET)
goto error;
- if (!(sl811->port1 & (1 << USB_PORT_FEAT_ENABLE)))
+ if (!(sl811->port1 & USB_PORT_STAT_ENABLE))
goto error;
DBG("suspend...\n");
@@ -1303,9 +1303,9 @@ sl811h_hub_control(
port_power(sl811, 1);
break;
case USB_PORT_FEAT_RESET:
- if (sl811->port1 & (1 << USB_PORT_FEAT_SUSPEND))
+ if (sl811->port1 & USB_PORT_STAT_SUSPEND)
goto error;
- if (!(sl811->port1 & (1 << USB_PORT_FEAT_POWER)))
+ if (!(sl811->port1 & USB_PORT_STAT_POWER))
break;
/* 50 msec of reset/SE0 signaling, irqs blocked */
@@ -1314,7 +1314,7 @@ sl811h_hub_control(
sl811->irq_enable);
sl811->ctrl1 = SL11H_CTL1MASK_SE0;
sl811_write(sl811, SL11H_CTLREG1, sl811->ctrl1);
- sl811->port1 |= (1 << USB_PORT_FEAT_RESET);
+ sl811->port1 |= USB_PORT_STAT_RESET;
mod_timer(&sl811->timer, jiffies
+ msecs_to_jiffies(50));
break;
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index dd69df1e455..325b47a267b 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -205,27 +205,27 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
/* wPortChange bits */
if (temp & PORT_CSC)
- status |= 1 << USB_PORT_FEAT_C_CONNECTION;
+ status |= USB_PORT_STAT_C_CONNECTION << 16;
if (temp & PORT_PEC)
- status |= 1 << USB_PORT_FEAT_C_ENABLE;
+ status |= USB_PORT_STAT_C_ENABLE << 16;
if ((temp & PORT_OCC))
- status |= 1 << USB_PORT_FEAT_C_OVER_CURRENT;
+ status |= USB_PORT_STAT_C_OVERCURRENT << 16;
/*
* FIXME ignoring suspend, reset, and USB 2.1/3.0 specific
* changes
*/
if (temp & PORT_CONNECT) {
- status |= 1 << USB_PORT_FEAT_CONNECTION;
+ status |= USB_PORT_STAT_CONNECTION;
status |= xhci_port_speed(temp);
}
if (temp & PORT_PE)
- status |= 1 << USB_PORT_FEAT_ENABLE;
+ status |= USB_PORT_STAT_ENABLE;
if (temp & PORT_OC)
- status |= 1 << USB_PORT_FEAT_OVER_CURRENT;
+ status |= USB_PORT_STAT_OVERCURRENT;
if (temp & PORT_RESET)
- status |= 1 << USB_PORT_FEAT_RESET;
+ status |= USB_PORT_STAT_RESET;
if (temp & PORT_POWER)
- status |= 1 << USB_PORT_FEAT_POWER;
+ status |= USB_PORT_STAT_POWER;
xhci_dbg(xhci, "Get port status returned 0x%x\n", status);
put_unaligned(cpu_to_le32(status), (__le32 *) buf);
break;
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-23 15:36:18 +0000