diff options
Diffstat (limited to 'drivers/usb/host')
36 files changed, 1012 insertions, 1192 deletions
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index c59a1126926..de94f269906 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -2,11 +2,9 @@ # USB Host Controller Drivers # comment "USB Host Controller Drivers" - depends on USB config USB_C67X00_HCD tristate "Cypress C67x00 HCD support" - depends on USB help The Cypress C67x00 (EZ-Host/EZ-OTG) chips are dual-role host/peripheral/OTG USB controllers. @@ -19,7 +17,7 @@ config USB_C67X00_HCD config USB_XHCI_HCD tristate "xHCI HCD (USB 3.0) support" - depends on USB && USB_ARCH_HAS_XHCI + depends on USB_ARCH_HAS_XHCI ---help--- The eXtensible Host Controller Interface (xHCI) is standard for USB 3.0 "SuperSpeed" host controller hardware. @@ -27,13 +25,13 @@ config USB_XHCI_HCD To compile this driver as a module, choose M here: the module will be called xhci-hcd. +if USB_XHCI_HCD + config USB_XHCI_PLATFORM tristate - depends on USB_XHCI_HCD config USB_XHCI_HCD_DEBUGGING bool "Debugging for the xHCI host controller" - depends on USB_XHCI_HCD ---help--- Say 'Y' to turn on debugging for the xHCI host controller driver. This will spew debugging output, even in interrupt context. @@ -41,9 +39,11 @@ config USB_XHCI_HCD_DEBUGGING If unsure, say N. +endif # USB_XHCI_HCD + config USB_EHCI_HCD tristate "EHCI HCD (USB 2.0) support" - depends on USB && USB_ARCH_HAS_EHCI + depends on USB_ARCH_HAS_EHCI ---help--- The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0 "high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware. @@ -95,14 +95,19 @@ config USB_EHCI_TT_NEWSCHED If unsure, say Y. +config USB_FSL_MPH_DR_OF + tristate + +if USB_EHCI_HCD + config USB_EHCI_PCI tristate - depends on USB_EHCI_HCD && PCI + depends on PCI default y config USB_EHCI_HCD_PMC_MSP tristate "EHCI support for on-chip PMC MSP71xx USB controller" - depends on USB_EHCI_HCD && MSP_HAS_USB + depends on MSP_HAS_USB default n select USB_EHCI_BIG_ENDIAN_DESC select USB_EHCI_BIG_ENDIAN_MMIO @@ -112,22 +117,13 @@ config USB_EHCI_HCD_PMC_MSP config USB_EHCI_BIG_ENDIAN_MMIO bool - depends on USB_EHCI_HCD && (PPC_CELLEB || PPC_PS3 || 440EPX || \ - ARCH_IXP4XX || XPS_USB_HCD_XILINX || \ - PPC_MPC512x || CPU_CAVIUM_OCTEON || \ - PMC_MSP || SPARC_LEON || MIPS_SEAD3) - default y config USB_EHCI_BIG_ENDIAN_DESC bool - depends on USB_EHCI_HCD && (440EPX || ARCH_IXP4XX || XPS_USB_HCD_XILINX || \ - PPC_MPC512x || PMC_MSP || SPARC_LEON || \ - MIPS_SEAD3) - default y config XPS_USB_HCD_XILINX bool "Use Xilinx usb host EHCI controller core" - depends on USB_EHCI_HCD && (PPC32 || MICROBLAZE) + depends on (PPC32 || MICROBLAZE) select USB_EHCI_BIG_ENDIAN_DESC select USB_EHCI_BIG_ENDIAN_MMIO ---help--- @@ -136,12 +132,9 @@ config XPS_USB_HCD_XILINX support both high speed and full speed devices, or high speed devices only. -config USB_FSL_MPH_DR_OF - tristate - config USB_EHCI_FSL bool "Support for Freescale PPC on-chip EHCI USB controller" - depends on USB_EHCI_HCD && FSL_SOC + depends on FSL_SOC select USB_EHCI_ROOT_HUB_TT select USB_FSL_MPH_DR_OF if OF ---help--- @@ -149,22 +142,53 @@ config USB_EHCI_FSL config USB_EHCI_MXC tristate "Support for Freescale i.MX on-chip EHCI USB controller" - depends on USB_EHCI_HCD && ARCH_MXC + depends on ARCH_MXC select USB_EHCI_ROOT_HUB_TT ---help--- Variation of ARC USB block used in some Freescale chips. config USB_EHCI_HCD_OMAP - bool "EHCI support for OMAP3 and later chips" - depends on USB_EHCI_HCD && ARCH_OMAP + tristate "EHCI support for OMAP3 and later chips" + depends on ARCH_OMAP default y ---help--- Enables support for the on-chip EHCI controller on OMAP3 and later chips. + If your system uses a PHY on the USB port, you will need to + enable USB_PHY and the appropriate PHY driver as well. Most + boards need the NOP_USB_XCEIV PHY driver. + +config USB_EHCI_HCD_ORION + tristate "Support for Marvell EBU on-chip EHCI USB controller" + depends on USB_EHCI_HCD && PLAT_ORION + default y + ---help--- + Enables support for the on-chip EHCI controller on Marvell's + embedded ARM SoCs, including Orion, Kirkwood, Dove, Armada XP, + Armada 370. This is different from the EHCI implementation + on Marvell's mobile PXA and MMP SoC, see "EHCI support for + Marvell PXA/MMP USB controller" for those. + +config USB_EHCI_HCD_SPEAR + tristate "Support for ST SPEAr on-chip EHCI USB controller" + depends on USB_EHCI_HCD && PLAT_SPEAR + default y + ---help--- + Enables support for the on-chip EHCI controller on + ST SPEAr chips. + +config USB_EHCI_HCD_AT91 + tristate "Support for Atmel on-chip EHCI USB controller" + depends on USB_EHCI_HCD && ARCH_AT91 + default y + ---help--- + Enables support for the on-chip EHCI controller on + Atmel chips. config USB_EHCI_MSM - bool "Support for MSM on-chip EHCI USB controller" - depends on USB_EHCI_HCD && ARCH_MSM + tristate "Support for Qualcomm QSD/MSM on-chip EHCI USB controller" + depends on ARCH_MSM + depends on USB_PHY select USB_EHCI_ROOT_HUB_TT select USB_MSM_OTG ---help--- @@ -177,15 +201,16 @@ config USB_EHCI_MSM config USB_EHCI_TEGRA boolean "NVIDIA Tegra HCD support" - depends on USB_EHCI_HCD && ARCH_TEGRA + depends on ARCH_TEGRA select USB_EHCI_ROOT_HUB_TT + select USB_PHY help This driver enables support for the internal USB Host Controllers found in NVIDIA Tegra SoCs. The controllers are EHCI compliant. config USB_EHCI_HCD_PPC_OF bool "EHCI support for PPC USB controller on OF platform bus" - depends on USB_EHCI_HCD && PPC_OF + depends on PPC_OF default y ---help--- Enables support for the USB controller present on the PowerPC @@ -193,35 +218,40 @@ config USB_EHCI_HCD_PPC_OF config USB_EHCI_SH bool "EHCI support for SuperH USB controller" - depends on USB_EHCI_HCD && SUPERH + depends on SUPERH ---help--- Enables support for the on-chip EHCI controller on the SuperH. If you use the PCI EHCI controller, this option is not necessary. config USB_EHCI_S5P - boolean "S5P EHCI support" - depends on USB_EHCI_HCD && PLAT_S5P + tristate "EHCI support for Samsung S5P/EXYNOS SoC Series" + depends on PLAT_S5P help - Enable support for the S5P SOC's on-chip EHCI controller. + Enable support for the Samsung S5Pxxxx and Exynos3/4/5 SOC's + on-chip EHCI controller. config USB_EHCI_MV - bool "EHCI support for Marvell on-chip controller" - depends on USB_EHCI_HCD && (ARCH_PXA || ARCH_MMP) + bool "EHCI support for Marvell PXA/MMP USB controller" + depends on (ARCH_PXA || ARCH_MMP) select USB_EHCI_ROOT_HUB_TT ---help--- Enables support for Marvell (including PXA and MMP series) on-chip USB SPH and OTG controller. SPH is a single port host, and it can only be EHCI host. OTG is controller that can switch to host mode. + Note that this driver will not work on Marvell's other EHCI + controller used by the EBU-type SoCs including Orion, Kirkwood, + Dova, Armada 370 and Armada XP. See "Support for Marvell EBU + on-chip EHCI USB controller" for those. config USB_W90X900_EHCI bool "W90X900(W90P910) EHCI support" - depends on USB_EHCI_HCD && ARCH_W90X900 + depends on ARCH_W90X900 ---help--- Enables support for the W90X900 USB controller config USB_CNS3XXX_EHCI bool "Cavium CNS3XXX EHCI Module (DEPRECATED)" - depends on USB_EHCI_HCD && ARCH_CNS3XXX + depends on ARCH_CNS3XXX select USB_EHCI_HCD_PLATFORM ---help--- This option is deprecated now and the driver was removed, use @@ -233,7 +263,7 @@ config USB_CNS3XXX_EHCI config USB_EHCI_ATH79 bool "EHCI support for AR7XXX/AR9XXX SoCs (DEPRECATED)" - depends on USB_EHCI_HCD && (SOC_AR71XX || SOC_AR724X || SOC_AR913X || SOC_AR933X) + depends on (SOC_AR71XX || SOC_AR724X || SOC_AR913X || SOC_AR933X) select USB_EHCI_ROOT_HUB_TT select USB_EHCI_HCD_PLATFORM default y @@ -244,9 +274,31 @@ config USB_EHCI_ATH79 Enables support for the built-in EHCI controller present on the Atheros AR7XXX/AR9XXX SoCs. +config USB_EHCI_HCD_PLATFORM + tristate "Generic EHCI driver for a platform device" + default n + ---help--- + Adds an EHCI host driver for a generic platform device, which + provides a memory space and an irq. + + If unsure, say N. + +config USB_OCTEON_EHCI + bool "Octeon on-chip EHCI support" + depends on CPU_CAVIUM_OCTEON + default n + select USB_EHCI_BIG_ENDIAN_MMIO + help + Enable support for the Octeon II SOC's on-chip EHCI + controller. It is needed for high-speed (480Mbit/sec) + USB 2.0 device support. All CN6XXX based chips with USB are + supported. + +endif # USB_EHCI_HCD + config USB_OXU210HP_HCD tristate "OXU210HP HCD support" - depends on USB && GENERIC_HARDIRQS + depends on GENERIC_HARDIRQS ---help--- The OXU210HP is an USB host/OTG/device controller. Enable this option if your board has this chip. If unsure, say N. @@ -259,7 +311,6 @@ config USB_OXU210HP_HCD config USB_ISP116X_HCD tristate "ISP116X HCD support" - depends on USB ---help--- The ISP1160 and ISP1161 chips are USB host controllers. Enable this option if your board has this chip. If unsure, say N. @@ -271,7 +322,6 @@ config USB_ISP116X_HCD config USB_ISP1760_HCD tristate "ISP 1760 HCD support" - depends on USB ---help--- The ISP1760 chip is a USB 2.0 host controller. @@ -286,7 +336,6 @@ config USB_ISP1760_HCD config USB_ISP1362_HCD tristate "ISP1362 HCD support" - depends on USB default N ---help--- Supports the Philips ISP1362 chip as a host controller @@ -298,9 +347,8 @@ config USB_ISP1362_HCD config USB_OHCI_HCD tristate "OHCI HCD support" - depends on USB && USB_ARCH_HAS_OHCI + depends on USB_ARCH_HAS_OHCI select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3 - select USB_OTG_UTILS if ARCH_OMAP depends on USB_ISP1301 || !ARCH_LPC32XX ---help--- The Open Host Controller Interface (OHCI) is a standard for accessing @@ -315,16 +363,18 @@ config USB_OHCI_HCD To compile this driver as a module, choose M here: the module will be called ohci-hcd. +if USB_OHCI_HCD + config USB_OHCI_HCD_OMAP1 bool "OHCI support for OMAP1/2 chips" - depends on USB_OHCI_HCD && ARCH_OMAP1 + depends on ARCH_OMAP1 default y ---help--- Enables support for the OHCI controller on OMAP1/2 chips. config USB_OHCI_HCD_OMAP3 bool "OHCI support for OMAP3 and later chips" - depends on USB_OHCI_HCD && (ARCH_OMAP3 || ARCH_OMAP4) + depends on (ARCH_OMAP3 || ARCH_OMAP4) default y ---help--- Enables support for the on-chip OHCI controller on @@ -332,7 +382,7 @@ config USB_OHCI_HCD_OMAP3 config USB_OHCI_ATH79 bool "USB OHCI support for the Atheros AR71XX/AR7240 SoCs (DEPRECATED)" - depends on USB_OHCI_HCD && (SOC_AR71XX || SOC_AR724X) + depends on (SOC_AR71XX || SOC_AR724X) select USB_OHCI_HCD_PLATFORM default y help @@ -344,7 +394,7 @@ config USB_OHCI_ATH79 config USB_OHCI_HCD_PPC_OF_BE bool "OHCI support for OF platform bus (big endian)" - depends on USB_OHCI_HCD && PPC_OF + depends on PPC_OF select USB_OHCI_BIG_ENDIAN_DESC select USB_OHCI_BIG_ENDIAN_MMIO ---help--- @@ -353,7 +403,7 @@ config USB_OHCI_HCD_PPC_OF_BE config USB_OHCI_HCD_PPC_OF_LE bool "OHCI support for OF platform bus (little endian)" - depends on USB_OHCI_HCD && PPC_OF + depends on PPC_OF select USB_OHCI_LITTLE_ENDIAN ---help--- Enables support for little-endian USB controllers present on the @@ -361,12 +411,12 @@ config USB_OHCI_HCD_PPC_OF_LE config USB_OHCI_HCD_PPC_OF bool - depends on USB_OHCI_HCD && PPC_OF + depends on PPC_OF default USB_OHCI_HCD_PPC_OF_BE || USB_OHCI_HCD_PPC_OF_LE config USB_OHCI_HCD_PCI bool "OHCI support for PCI-bus USB controllers" - depends on USB_OHCI_HCD && PCI && (STB03xxx || PPC_MPC52xx || USB_OHCI_HCD_PPC_OF) + depends on PCI && (STB03xxx || PPC_MPC52xx || USB_OHCI_HCD_PPC_OF) default y select USB_OHCI_LITTLE_ENDIAN ---help--- @@ -375,7 +425,7 @@ config USB_OHCI_HCD_PCI config USB_OHCI_HCD_SSB bool "OHCI support for Broadcom SSB OHCI core (DEPRECATED)" - depends on USB_OHCI_HCD && (SSB = y || SSB = USB_OHCI_HCD) + depends on (SSB = y || SSB = USB_OHCI_HCD) select USB_HCD_SSB select USB_OHCI_HCD_PLATFORM default n @@ -393,7 +443,7 @@ config USB_OHCI_HCD_SSB config USB_OHCI_SH bool "OHCI support for SuperH USB controller (DEPRECATED)" - depends on USB_OHCI_HCD && SUPERH + depends on SUPERH select USB_OHCI_HCD_PLATFORM ---help--- This option is deprecated now and the driver was removed, use @@ -404,13 +454,13 @@ config USB_OHCI_SH config USB_OHCI_EXYNOS boolean "OHCI support for Samsung EXYNOS SoC Series" - depends on USB_OHCI_HCD && ARCH_EXYNOS + depends on ARCH_EXYNOS help Enable support for the Samsung Exynos SOC's on-chip OHCI controller. config USB_CNS3XXX_OHCI bool "Cavium CNS3XXX OHCI Module (DEPRECATED)" - depends on USB_OHCI_HCD && ARCH_CNS3XXX + depends on ARCH_CNS3XXX select USB_OHCI_HCD_PLATFORM ---help--- This option is deprecated now and the driver was removed, use @@ -421,7 +471,6 @@ config USB_CNS3XXX_OHCI config USB_OHCI_HCD_PLATFORM bool "Generic OHCI driver for a platform device" - depends on USB_OHCI_HCD default n ---help--- Adds an OHCI host driver for a generic platform device, which @@ -429,35 +478,36 @@ config USB_OHCI_HCD_PLATFORM If unsure, say N. -config USB_EHCI_HCD_PLATFORM - tristate "Generic EHCI driver for a platform device" - depends on USB_EHCI_HCD - default n - ---help--- - Adds an EHCI host driver for a generic platform device, which - provides a memory space and an irq. +config USB_OCTEON_OHCI + bool "Octeon on-chip OHCI support" + depends on CPU_CAVIUM_OCTEON + default USB_OCTEON_EHCI + select USB_OHCI_BIG_ENDIAN_MMIO + select USB_OHCI_LITTLE_ENDIAN + help + Enable support for the Octeon II SOC's on-chip OHCI + controller. It is needed for low-speed USB 1.0 device + support. All CN6XXX based chips with USB are supported. - If unsure, say N. config USB_OHCI_BIG_ENDIAN_DESC bool - depends on USB_OHCI_HCD default n config USB_OHCI_BIG_ENDIAN_MMIO bool - depends on USB_OHCI_HCD default n config USB_OHCI_LITTLE_ENDIAN bool - depends on USB_OHCI_HCD default n if STB03xxx || PPC_MPC52xx default y +endif # USB_OHCI_HCD + config USB_UHCI_HCD tristate "UHCI HCD (most Intel and VIA) support" - depends on USB && (PCI || SPARC_LEON || ARCH_VT8500) + depends on PCI || SPARC_LEON || ARCH_VT8500 ---help--- The Universal Host Controller Interface is a standard by Intel for accessing the USB hardware in the PC (which is also called the USB @@ -497,7 +547,7 @@ config USB_UHCI_BIG_ENDIAN_DESC config USB_FHCI_HCD tristate "Freescale QE USB Host Controller support" - depends on USB && OF_GPIO && QE_GPIO && QUICC_ENGINE + depends on OF_GPIO && QE_GPIO && QUICC_ENGINE select FSL_GTM select QE_USB help @@ -514,7 +564,7 @@ config FHCI_DEBUG config USB_U132_HCD tristate "Elan U132 Adapter Host Controller" - depends on USB && USB_FTDI_ELAN + depends on USB_FTDI_ELAN default M help The U132 adapter is a USB to CardBus adapter specifically designed @@ -542,7 +592,6 @@ config USB_U132_HCD config USB_SL811_HCD tristate "SL811HS HCD support" - depends on USB help The SL811HS is a single-port USB controller that supports either host side or peripheral side roles. Enable this option if your @@ -574,7 +623,6 @@ config USB_SL811_CS config USB_R8A66597_HCD tristate "R8A66597 HCD support" - depends on USB help The R8A66597 is a USB 2.0 host and peripheral controller. @@ -586,7 +634,6 @@ config USB_R8A66597_HCD config USB_RENESAS_USBHS_HCD tristate "Renesas USBHS HCD support" - depends on USB depends on USB_RENESAS_USBHS help The Renesas USBHS is a USB 2.0 host and peripheral controller. @@ -611,7 +658,7 @@ config USB_WHCI_HCD config USB_HWA_HCD tristate "Host Wire Adapter (HWA) driver" - depends on USB && UWB + depends on UWB select USB_WUSB select UWB_HWA help @@ -625,7 +672,7 @@ config USB_HWA_HCD config USB_IMX21_HCD tristate "i.MX21 HCD support" - depends on USB && ARM && ARCH_MXC + depends on ARM && ARCH_MXC help This driver enables support for the on-chip USB host in the i.MX21 processor. @@ -633,27 +680,7 @@ config USB_IMX21_HCD To compile this driver as a module, choose M here: the module will be called "imx21-hcd". -config USB_OCTEON_EHCI - bool "Octeon on-chip EHCI support" - depends on USB && USB_EHCI_HCD && CPU_CAVIUM_OCTEON - default n - select USB_EHCI_BIG_ENDIAN_MMIO - help - Enable support for the Octeon II SOC's on-chip EHCI - controller. It is needed for high-speed (480Mbit/sec) - USB 2.0 device support. All CN6XXX based chips with USB are - supported. -config USB_OCTEON_OHCI - bool "Octeon on-chip OHCI support" - depends on USB && USB_OHCI_HCD && CPU_CAVIUM_OCTEON - default USB_OCTEON_EHCI - select USB_OHCI_BIG_ENDIAN_MMIO - select USB_OHCI_LITTLE_ENDIAN - help - Enable support for the Octeon II SOC's on-chip OHCI - controller. It is needed for low-speed USB 1.0 device - support. All CN6XXX based chips with USB are supported. config USB_OCTEON2_COMMON bool diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index 001fbff2fde..4fb73c156d7 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -27,6 +27,12 @@ obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o obj-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o obj-$(CONFIG_USB_EHCI_HCD_PLATFORM) += ehci-platform.o obj-$(CONFIG_USB_EHCI_MXC) += ehci-mxc.o +obj-$(CONFIG_USB_EHCI_HCD_OMAP) += ehci-omap.o +obj-$(CONFIG_USB_EHCI_HCD_ORION) += ehci-orion.o +obj-$(CONFIG_USB_EHCI_HCD_SPEAR) += ehci-spear.o +obj-$(CONFIG_USB_EHCI_S5P) += ehci-s5p.o +obj-$(CONFIG_USB_EHCI_HCD_AT91) += ehci-atmel.o +obj-$(CONFIG_USB_EHCI_MSM) += ehci-msm.o obj-$(CONFIG_USB_OXU210HP_HCD) += oxu210hp-hcd.o obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c index f3beac4d06b..66420097c24 100644 --- a/drivers/usb/host/ehci-atmel.c +++ b/drivers/usb/host/ehci-atmel.c @@ -12,9 +12,22 @@ */ #include <linux/clk.h> -#include <linux/platform_device.h> +#include <linux/dma-mapping.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> #include <linux/of.h> #include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/usb.h> +#include <linux/usb/hcd.h> + +#include "ehci.h" + +#define DRIVER_DESC "EHCI Atmel driver" + +static const char hcd_name[] = "ehci-atmel"; +static struct hc_driver __read_mostly ehci_atmel_hc_driver; /* interface and function clocks */ static struct clk *iclk, *fclk; @@ -50,51 +63,6 @@ static void atmel_stop_ehci(struct platform_device *pdev) /*-------------------------------------------------------------------------*/ -static int ehci_atmel_setup(struct usb_hcd *hcd) -{ - struct ehci_hcd *ehci = hcd_to_ehci(hcd); - - /* registers start at offset 0x0 */ - ehci->caps = hcd->regs; - - return ehci_setup(hcd); -} - -static const struct hc_driver ehci_atmel_hc_driver = { - .description = hcd_name, - .product_desc = "Atmel EHCI UHP HS", - .hcd_priv_size = sizeof(struct ehci_hcd), - - /* generic hardware linkage */ - .irq = ehci_irq, - .flags = HCD_MEMORY | HCD_USB2, - - /* basic lifecycle operations */ - .reset = ehci_atmel_setup, - .start = ehci_run, - .stop = ehci_stop, - .shutdown = ehci_shutdown, - - /* managing i/o requests and associated device resources */ - .urb_enqueue = ehci_urb_enqueue, - .urb_dequeue = ehci_urb_dequeue, - .endpoint_disable = ehci_endpoint_disable, - .endpoint_reset = ehci_endpoint_reset, - - /* scheduling support */ - .get_frame_number = ehci_get_frame, - - /* root hub support */ - .hub_status_data = ehci_hub_status_data, - .hub_control = ehci_hub_control, - .bus_suspend = ehci_bus_suspend, - .bus_resume = ehci_bus_resume, - .relinquish_port = ehci_relinquish_port, - .port_handed_over = ehci_port_handed_over, - - .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, -}; - static u64 at91_ehci_dma_mask = DMA_BIT_MASK(32); static int ehci_atmel_drv_probe(struct platform_device *pdev) @@ -102,6 +70,7 @@ static int ehci_atmel_drv_probe(struct platform_device *pdev) struct usb_hcd *hcd; const struct hc_driver *driver = &ehci_atmel_hc_driver; struct resource *res; + struct ehci_hcd *ehci; int irq; int retval; @@ -162,6 +131,10 @@ static int ehci_atmel_drv_probe(struct platform_device *pdev) goto fail_request_resource; } + ehci = hcd_to_ehci(hcd); + /* registers start at offset 0x0 */ + ehci->caps = hcd->regs; + atmel_start_ehci(pdev); retval = usb_add_hcd(hcd, irq, IRQF_SHARED); @@ -185,7 +158,6 @@ static int ehci_atmel_drv_remove(struct platform_device *pdev) { struct usb_hcd *hcd = platform_get_drvdata(pdev); - ehci_shutdown(hcd); usb_remove_hcd(hcd); usb_put_hcd(hcd); @@ -213,3 +185,25 @@ static struct platform_driver ehci_atmel_driver = { .of_match_table = of_match_ptr(atmel_ehci_dt_ids), }, }; + +static int __init ehci_atmel_init(void) +{ + if (usb_disabled()) + return -ENODEV; + + pr_info("%s: " DRIVER_DESC "\n", hcd_name); + ehci_init_driver(&ehci_atmel_hc_driver, NULL); + return platform_driver_register(&ehci_atmel_driver); +} +module_init(ehci_atmel_init); + +static void __exit ehci_atmel_cleanup(void) +{ + platform_driver_unregister(&ehci_atmel_driver); +} +module_exit(ehci_atmel_cleanup); + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_ALIAS("platform:atmel-ehci"); +MODULE_AUTHOR("Nicolas Ferre"); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/host/ehci-dbg.c b/drivers/usb/host/ehci-dbg.c index 70b496dc18a..5429d2645bb 100644 --- a/drivers/usb/host/ehci-dbg.c +++ b/drivers/usb/host/ehci-dbg.c @@ -510,14 +510,16 @@ static ssize_t fill_async_buffer(struct debug_buffer *buf) spin_lock_irqsave (&ehci->lock, flags); for (qh = ehci->async->qh_next.qh; size > 0 && qh; qh = qh->qh_next.qh) qh_lines (ehci, qh, &next, &size); - if (ehci->async_unlink && size > 0) { + if (!list_empty(&ehci->async_unlink) && size > 0) { temp = scnprintf(next, size, "\nunlink =\n"); size -= temp; next += temp; - for (qh = ehci->async_unlink; size > 0 && qh; - qh = qh->unlink_next) - qh_lines (ehci, qh, &next, &size); + list_for_each_entry(qh, &ehci->async_unlink, unlink_node) { + if (size <= 0) + break; + qh_lines(ehci, qh, &next, &size); + } } spin_unlock_irqrestore (&ehci->lock, flags); @@ -814,9 +816,10 @@ static ssize_t fill_registers_buffer(struct debug_buffer *buf) } } - if (ehci->async_unlink) { + if (!list_empty(&ehci->async_unlink)) { temp = scnprintf(next, size, "async unlink qh %p\n", - ehci->async_unlink); + list_first_entry(&ehci->async_unlink, + struct ehci_qh, unlink_node)); size -= temp; next += temp; } diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index d81d2fcbff1..3be3df233a0 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -370,6 +370,15 @@ static int ehci_fsl_setup(struct usb_hcd *hcd) /* EHCI registers start at offset 0x100 */ ehci->caps = hcd->regs + 0x100; +#ifdef CONFIG_PPC_83xx + /* + * Deal with MPC834X that need port power to be cycled after the power + * fault condition is removed. Otherwise the state machine does not + * reflect PORTSC[CSC] correctly. + */ + ehci->need_oc_pp_cycle = 1; +#endif + hcd->has_tt = 1; retval = ehci_setup(hcd); diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 416a6dce5e1..312fc10da3c 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -482,6 +482,9 @@ static int ehci_init(struct usb_hcd *hcd) * periodic_size can shrink by USBCMD update if hcc_params allows. */ ehci->periodic_size = DEFAULT_I_TDPS; + INIT_LIST_HEAD(&ehci->async_unlink); + INIT_LIST_HEAD(&ehci->async_idle); + INIT_LIST_HEAD(&ehci->intr_unlink); INIT_LIST_HEAD(&ehci->intr_qh_list); INIT_LIST_HEAD(&ehci->cached_itd_list); INIT_LIST_HEAD(&ehci->cached_sitd_list); @@ -670,9 +673,6 @@ int ehci_setup(struct usb_hcd *hcd) if (retval) return retval; - if (ehci_is_TDI(ehci)) - tdi_reset(ehci); - ehci_reset(ehci); return 0; @@ -749,7 +749,7 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd) /* guard against (alleged) silicon errata */ if (cmd & CMD_IAAD) ehci_dbg(ehci, "IAA with IAAD still set?\n"); - if (ehci->async_iaa) + if (ehci->iaa_in_progress) COUNT(ehci->stats.iaa); end_unlink_async(ehci); } @@ -757,7 +757,7 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd) /* remote wakeup [4.3.1] */ if (status & STS_PCD) { unsigned i = HCS_N_PORTS (ehci->hcs_params); - u32 ppcd = 0; + u32 ppcd = ~0; /* kick root hub later */ pcd_status = status; @@ -774,7 +774,7 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd) int pstatus; /* leverage per-port change bits feature */ - if (ehci->has_ppcd && !(ppcd & (1 << i))) + if (!(ppcd & (1 << i))) continue; pstatus = ehci_readl(ehci, &ehci->regs->port_status[i]); @@ -896,17 +896,24 @@ static int ehci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) if (rc) goto done; - switch (usb_pipetype (urb->pipe)) { - // case PIPE_CONTROL: - // case PIPE_BULK: - default: + if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { + /* + * We don't expedite dequeue for isochronous URBs. + * Just wait until they complete normally or their + * time slot expires. + */ + } else { qh = (struct ehci_qh *) urb->hcpriv; - if (!qh) - break; + qh->exception = 1; switch (qh->qh_state) { case QH_STATE_LINKED: + if (usb_pipetype(urb->pipe) == PIPE_INTERRUPT) + start_unlink_intr(ehci, qh); + else + start_unlink_async(ehci, qh); + break; case QH_STATE_COMPLETING: - start_unlink_async(ehci, qh); + qh->dequeue_during_giveback = 1; break; case QH_STATE_UNLINK: case QH_STATE_UNLINK_WAIT: @@ -917,33 +924,6 @@ static int ehci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) qh_completions(ehci, qh); break; } - break; - - case PIPE_INTERRUPT: - qh = (struct ehci_qh *) urb->hcpriv; - if (!qh) - break; - switch (qh->qh_state) { - case QH_STATE_LINKED: - case QH_STATE_COMPLETING: - start_unlink_intr(ehci, qh); - break; - case QH_STATE_IDLE: - qh_completions (ehci, qh); - break; - default: - ehci_dbg (ehci, "bogus qh %p state %d\n", - qh, qh->qh_state); - goto done; - } - break; - - case PIPE_ISOCHRONOUS: - // itd or sitd ... - - // wait till next completion, do it then. - // completion irqs can wait up to 1024 msec, - break; } done: spin_unlock_irqrestore (&ehci->lock, flags); @@ -984,6 +964,7 @@ rescan: goto done; } + qh->exception = 1; if (ehci->rh_state < EHCI_RH_RUNNING) qh->qh_state = QH_STATE_IDLE; switch (qh->qh_state) { @@ -1052,13 +1033,12 @@ ehci_endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep) usb_settoggle(qh->dev, epnum, is_out, 0); if (!list_empty(&qh->qtd_list)) { WARN_ONCE(1, "clear_halt for a busy endpoint\n"); - } else if (qh->qh_state == QH_STATE_LINKED || - qh->qh_state == QH_STATE_COMPLETING) { - + } else { /* The toggle value in the QH can't be updated * while the QH is active. Unlink it now; * re-linking will call qh_refresh(). */ + qh->exception = 1; if (eptype == USB_ENDPOINT_XFER_BULK) start_unlink_async(ehci, qh); else @@ -1251,11 +1231,6 @@ MODULE_LICENSE ("GPL"); #define PLATFORM_DRIVER ehci_hcd_sh_driver #endif -#ifdef CONFIG_USB_EHCI_HCD_OMAP -#include "ehci-omap.c" -#define PLATFORM_DRIVER ehci_hcd_omap_driver -#endif - #ifdef CONFIG_PPC_PS3 #include "ehci-ps3.c" #define PS3_SYSTEM_BUS_DRIVER ps3_ehci_driver @@ -1271,41 +1246,16 @@ MODULE_LICENSE ("GPL"); #define XILINX_OF_PLATFORM_DRIVER ehci_hcd_xilinx_of_driver #endif -#ifdef CONFIG_PLAT_ORION -#include "ehci-orion.c" -#define PLATFORM_DRIVER ehci_orion_driver -#endif - #ifdef CONFIG_USB_W90X900_EHCI #include "ehci-w90x900.c" #define PLATFORM_DRIVER ehci_hcd_w90x900_driver #endif -#ifdef CONFIG_ARCH_AT91 -#include "ehci-atmel.c" -#define PLATFORM_DRIVER ehci_atmel_driver -#endif - #ifdef CONFIG_USB_OCTEON_EHCI #include "ehci-octeon.c" #define PLATFORM_DRIVER ehci_octeon_driver #endif -#ifdef CONFIG_ARCH_VT8500 -#include "ehci-vt8500.c" -#define PLATFORM_DRIVER vt8500_ehci_driver -#endif - -#ifdef CONFIG_PLAT_SPEAR -#include "ehci-spear.c" -#define PLATFORM_DRIVER spear_ehci_hcd_driver -#endif - -#ifdef CONFIG_USB_EHCI_MSM -#include "ehci-msm.c" -#define PLATFORM_DRIVER ehci_msm_driver -#endif - #ifdef CONFIG_TILE_USB #include "ehci-tilegx.c" #define PLATFORM_DRIVER ehci_hcd_tilegx_driver @@ -1321,11 +1271,6 @@ MODULE_LICENSE ("GPL"); #define PLATFORM_DRIVER tegra_ehci_driver #endif -#ifdef CONFIG_USB_EHCI_S5P -#include "ehci-s5p.c" -#define PLATFORM_DRIVER s5p_ehci_driver -#endif - #ifdef CONFIG_SPARC_LEON #include "ehci-grlib.c" #define PLATFORM_DRIVER ehci_grlib_driver @@ -1345,6 +1290,12 @@ MODULE_LICENSE ("GPL"); !IS_ENABLED(CONFIG_USB_EHCI_HCD_PLATFORM) && \ !IS_ENABLED(CONFIG_USB_CHIPIDEA_HOST) && \ !IS_ENABLED(CONFIG_USB_EHCI_MXC) && \ + !IS_ENABLED(CONFIG_USB_EHCI_HCD_OMAP) && \ + !IS_ENABLED(CONFIG_USB_EHCI_HCD_ORION) && \ + !IS_ENABLED(CONFIG_USB_EHCI_HCD_SPEAR) && \ + !IS_ENABLED(CONFIG_USB_EHCI_S5P) && \ + !IS_ENABLED(CONFIG_USB_EHCI_HCD_AT91) && \ + !IS_ENABLED(CONFIG_USB_EHCI_MSM) && \ !defined(PLATFORM_DRIVER) && \ !defined(PS3_SYSTEM_BUS_DRIVER) && \ !defined(OF_PLATFORM_DRIVER) && \ diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index 7d06e77f6c4..9ab4a4d9768 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -464,7 +464,7 @@ static int ehci_bus_resume (struct usb_hcd *hcd) while (i--) { temp = ehci_readl(ehci, &ehci->regs->port_status [i]); if (test_bit(i, &resume_needed)) { - temp &= ~(PORT_RWC_BITS | PORT_RESUME); + temp &= ~(PORT_RWC_BITS | PORT_SUSPEND | PORT_RESUME); ehci_writel(ehci, temp, &ehci->regs->port_status [i]); ehci_vdbg (ehci, "resumed port %d\n", i + 1); } @@ -590,7 +590,7 @@ ehci_hub_status_data (struct usb_hcd *hcd, char *buf) u32 mask; int ports, i, retval = 1; unsigned long flags; - u32 ppcd = 0; + u32 ppcd = ~0; /* init status to no-changes */ buf [0] = 0; @@ -628,9 +628,10 @@ ehci_hub_status_data (struct usb_hcd *hcd, char *buf) for (i = 0; i < ports; i++) { /* leverage per-port change bits feature */ - if (ehci->has_ppcd && !(ppcd & (1 << i))) - continue; - temp = ehci_readl(ehci, &ehci->regs->port_status [i]); + if (ppcd & (1 << i)) + temp = ehci_readl(ehci, &ehci->regs->port_status[i]); + else + temp = 0; /* * Return status information even for ports with OWNER set. @@ -839,7 +840,8 @@ static int ehci_hub_control ( * power switching; they're allowed to just limit the * current. khubd will turn the power back on. */ - if ((temp & PORT_OC) && HCS_PPC(ehci->hcs_params)) { + if (((temp & PORT_OC) || (ehci->need_oc_pp_cycle)) + && HCS_PPC(ehci->hcs_params)) { ehci_writel(ehci, temp & ~(PORT_RWC_BITS | PORT_POWER), status_reg); @@ -870,10 +872,9 @@ static int ehci_hub_control ( usb_hcd_end_port_resume(&hcd->self, wIndex); /* stop resume signaling */ - temp = ehci_readl(ehci, status_reg); - ehci_writel(ehci, - temp & ~(PORT_RWC_BITS | PORT_RESUME), - status_reg); + temp &= ~(PORT_RWC_BITS | + PORT_SUSPEND | PORT_RESUME); + ehci_writel(ehci, temp, status_reg); clear_bit(wIndex, &ehci->resuming_ports); retval = handshake(ehci, status_reg, PORT_RESUME, 0, 2000 /* 2msec */); @@ -883,7 +884,7 @@ static int ehci_hub_control ( wIndex + 1, retval); goto error; } - temp &= ~(PORT_SUSPEND|PORT_RESUME|(3<<10)); + temp = ehci_readl(ehci, status_reg); } } diff --git a/drivers/usb/host/ehci-msm.c b/drivers/usb/host/ehci-msm.c index 88a49c87e74..0f717dc688b 100644 --- a/drivers/usb/host/ehci-msm.c +++ b/drivers/usb/host/ehci-msm.c @@ -22,16 +22,26 @@ * along with this program; if not, you can find it at http://www.fsf.org */ -#include <linux/platform_device.h> #include <linux/clk.h> #include <linux/err.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> #include <linux/pm_runtime.h> - #include <linux/usb/otg.h> #include <linux/usb/msm_hsusb_hw.h> +#include <linux/usb.h> +#include <linux/usb/hcd.h> + +#include "ehci.h" #define MSM_USB_BASE (hcd->regs) +#define DRIVER_DESC "Qualcomm On-Chip EHCI Host Controller" + +static const char hcd_name[] = "ehci-msm"; +static struct hc_driver __read_mostly msm_hc_driver; static struct usb_phy *phy; static int ehci_msm_reset(struct usb_hcd *hcd) @@ -56,52 +66,6 @@ static int ehci_msm_reset(struct usb_hcd *hcd) return 0; } -static struct hc_driver msm_hc_driver = { - .description = hcd_name, - .product_desc = "Qualcomm On-Chip EHCI Host Controller", - .hcd_priv_size = sizeof(struct ehci_hcd), - - /* - * generic hardware linkage - */ - .irq = ehci_irq, - .flags = HCD_USB2 | HCD_MEMORY, - - .reset = ehci_msm_reset, - .start = ehci_run, - - .stop = ehci_stop, - .shutdown = ehci_shutdown, - - /* - * managing i/o requests and associated device resources - */ - .urb_enqueue = ehci_urb_enqueue, - .urb_dequeue = ehci_urb_dequeue, - .endpoint_disable = ehci_endpoint_disable, - .endpoint_reset = ehci_endpoint_reset, - .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, - - /* - * scheduling support - */ - .get_frame_number = ehci_get_frame, - - /* - * root hub support - */ - .hub_status_data = ehci_hub_status_data, - .hub_control = ehci_hub_control, - .relinquish_port = ehci_relinquish_port, - .port_handed_over = ehci_port_handed_over, - - /* - * PM support - */ - .bus_suspend = ehci_bus_suspend, - .bus_resume = ehci_bus_resume, -}; - static int ehci_msm_probe(struct platform_device *pdev) { struct usb_hcd *hcd; @@ -145,7 +109,7 @@ static int ehci_msm_probe(struct platform_device *pdev) * management. */ phy = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2); - if (IS_ERR_OR_NULL(phy)) { + if (IS_ERR(phy)) { dev_err(&pdev->dev, "unable to find transceiver\n"); ret = -ENODEV; goto put_hcd; @@ -165,6 +129,8 @@ static int ehci_msm_probe(struct platform_device *pdev) pm_runtime_no_callbacks(&pdev->dev); pm_runtime_enable(&pdev->dev); + /* FIXME: need to call usb_add_hcd() here? */ + return 0; put_hcd: @@ -183,6 +149,8 @@ static int ehci_msm_remove(struct platform_device *pdev) otg_set_host(phy->otg, NULL); + /* FIXME: need to call usb_remove_hcd() here? */ + usb_put_hcd(hcd); return 0; @@ -226,3 +194,28 @@ static struct platform_driver ehci_msm_driver = { .pm = &ehci_msm_dev_pm_ops, }, }; + +static const struct ehci_driver_overrides msm_overrides __initdata = { + .reset = ehci_msm_reset, +}; + +static int __init ehci_msm_init(void) +{ + if (usb_disabled()) + return -ENODEV; + + pr_info("%s: " DRIVER_DESC "\n", hcd_name); + ehci_init_driver(&msm_hc_driver, &msm_overrides); + return platform_driver_register(&ehci_msm_driver); +} +module_init(ehci_msm_init); + +static void __exit ehci_msm_cleanup(void) +{ + platform_driver_unregister(&ehci_msm_driver); +} +module_exit(ehci_msm_cleanup); + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_ALIAS("platform:msm-ehci"); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/host/ehci-mv.c b/drivers/usb/host/ehci-mv.c index 3065809546b..402062973f0 100644 --- a/drivers/usb/host/ehci-mv.c +++ b/drivers/usb/host/ehci-mv.c @@ -33,25 +33,17 @@ struct ehci_hcd_mv { struct mv_usb_platform_data *pdata; - /* clock source and total clock number */ - unsigned int clknum; - struct clk *clk[0]; + struct clk *clk; }; static void ehci_clock_enable(struct ehci_hcd_mv *ehci_mv) { - unsigned int i; - - for (i = 0; i < ehci_mv->clknum; i++) - clk_prepare_enable(ehci_mv->clk[i]); + clk_prepare_enable(ehci_mv->clk); } static void ehci_clock_disable(struct ehci_hcd_mv *ehci_mv) { - unsigned int i; - - for (i = 0; i < ehci_mv->clknum; i++) - clk_disable_unprepare(ehci_mv->clk[i]); + clk_disable_unprepare(ehci_mv->clk); } static int mv_ehci_enable(struct ehci_hcd_mv *ehci_mv) @@ -144,9 +136,8 @@ static int mv_ehci_probe(struct platform_device *pdev) struct ehci_hcd *ehci; struct ehci_hcd_mv *ehci_mv; struct resource *r; - int clk_i, retval = -ENODEV; + int retval = -ENODEV; u32 offset; - size_t size; if (!pdata) { dev_err(&pdev->dev, "missing platform_data\n"); @@ -160,8 +151,7 @@ static int mv_ehci_probe(struct platform_device *pdev) if (!hcd) return -ENOMEM; - size = sizeof(*ehci_mv) + sizeof(struct clk *) * pdata->clknum; - ehci_mv = devm_kzalloc(&pdev->dev, size, GFP_KERNEL); + ehci_mv = devm_kzalloc(&pdev->dev, sizeof(*ehci_mv), GFP_KERNEL); if (ehci_mv == NULL) { dev_err(&pdev->dev, "cannot allocate ehci_hcd_mv\n"); retval = -ENOMEM; @@ -172,16 +162,11 @@ static int mv_ehci_probe(struct platform_device *pdev) ehci_mv->pdata = pdata; ehci_mv->hcd = hcd; - ehci_mv->clknum = pdata->clknum; - for (clk_i = 0; clk_i < ehci_mv->clknum; clk_i++) { - ehci_mv->clk[clk_i] = - devm_clk_get(&pdev->dev, pdata->clkname[clk_i]); - if (IS_ERR(ehci_mv->clk[clk_i])) { - dev_err(&pdev->dev, "error get clck \"%s\"\n", - pdata->clkname[clk_i]); - retval = PTR_ERR(ehci_mv->clk[clk_i]); - goto err_clear_drvdata; - } + ehci_mv->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(ehci_mv->clk)) { + dev_err(&pdev->dev, "error getting clock\n"); + retval = PTR_ERR(ehci_mv->clk); + goto err_clear_drvdata; } r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phyregs"); @@ -225,7 +210,7 @@ static int mv_ehci_probe(struct platform_device *pdev) (void __iomem *) ((unsigned long) ehci_mv->cap_regs + offset); hcd->rsrc_start = r->start; - hcd->rsrc_len = r->end - r->start + 1; + hcd->rsrc_len = resource_size(r); hcd->regs = ehci_mv->op_regs; hcd->irq = platform_get_irq(pdev, 0); @@ -240,12 +225,16 @@ static int mv_ehci_probe(struct platform_device *pdev) ehci_mv->mode = pdata->mode; if (ehci_mv->mode == MV_USB_MODE_OTG) { -#ifdef CONFIG_USB_OTG_UTILS ehci_mv->otg = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2); - if (IS_ERR_OR_NULL(ehci_mv->otg)) { - dev_err(&pdev->dev, - "unable to find transceiver\n"); - retval = -ENODEV; + if (IS_ERR(ehci_mv->otg)) { + retval = PTR_ERR(ehci_mv->otg); + + if (retval == -ENXIO) + dev_info(&pdev->dev, "MV_USB_MODE_OTG " + "must have CONFIG_USB_PHY enabled\n"); + else + dev_err(&pdev->dev, + "unable to find transceiver\n"); goto err_disable_clk; } @@ -258,11 +247,6 @@ static int mv_ehci_probe(struct platform_device *pdev) } /* otg will enable clock before use as host */ mv_ehci_disable(ehci_mv); -#else - dev_info(&pdev->dev, "MV_USB_MODE_OTG " - "must have CONFIG_USB_OTG_UTILS enabled\n"); - goto err_disable_clk; -#endif } else { if (pdata->set_vbus) pdata->set_vbus(1); diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c index e9301fb97ea..c369767b00e 100644 --- a/drivers/usb/host/ehci-mxc.c +++ b/drivers/usb/host/ehci-mxc.c @@ -28,11 +28,7 @@ #include <linux/slab.h> #include <linux/usb.h> #include <linux/usb/hcd.h> - #include <linux/platform_data/usb-ehci-mxc.h> - -#include <asm/mach-types.h> - #include "ehci.h" #define DRIVER_DESC "Freescale On-Chip EHCI Host driver" @@ -47,7 +43,7 @@ struct ehci_mxc_priv { static struct hc_driver __read_mostly ehci_mxc_hc_driver; -static const struct ehci_driver_overrides ehci_mxc_overrides __initdata = { +static const struct ehci_driver_overrides ehci_mxc_overrides __initconst = { .extra_priv_size = sizeof(struct ehci_mxc_priv), }; @@ -61,8 +57,6 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; struct ehci_hcd *ehci; - dev_info(&pdev->dev, "initializing i.MX USB Controller\n"); - if (!pdata) { dev_err(dev, "No platform data given, bailing out.\n"); return -EINVAL; @@ -178,7 +172,7 @@ err_alloc: return ret; } -static int __exit ehci_mxc_drv_remove(struct platform_device *pdev) +static int ehci_mxc_drv_remove(struct platform_device *pdev) { struct mxc_usbh_platform_data *pdata = pdev->dev.platform_data; struct usb_hcd *hcd = platform_get_drvdata(pdev); diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c index 0555ee42d7c..3d1491b5f36 100644 --- a/drivers/usb/host/ehci-omap.c +++ b/drivers/usb/host/ehci-omap.c @@ -4,10 +4,11 @@ * Bus Glue for the EHCI controllers in OMAP3/4 * Tested on several OMAP3 boards, and OMAP4 Pandaboard * - * Copyright (C) 2007-2011 Texas Instruments, Inc. + * Copyright (C) 2007-2013 Texas Instruments, Inc. * Author: Vikram Pandita <vikram.pandita@ti.com> * Author: Anand Gadiyar <gadiyar@ti.com> * Author: Keshava Munegowda <keshava_mgowda@ti.com> + * Author: Roger Quadros <rogerq@ti.com> * * Copyright (C) 2009 Nokia Corporation * Contact: Felipe Balbi <felipe.balbi@nokia.com> @@ -28,21 +29,23 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * - * TODO (last updated Feb 27, 2010): - * - add kernel-doc - * - enable AUTOIDLE - * - add suspend/resume - * - add HSIC and TLL support - * - convert to use hwmod and runtime PM */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/io.h> #include <linux/platform_device.h> #include <linux/slab.h> #include <linux/usb/ulpi.h> -#include <linux/regulator/consumer.h> #include <linux/pm_runtime.h> #include <linux/gpio.h> #include <linux/clk.h> +#include <linux/usb.h> +#include <linux/usb/hcd.h> +#include <linux/of.h> +#include <linux/dma-mapping.h> + +#include "ehci.h" #include <linux/platform_data/usb-omap.h> @@ -57,10 +60,16 @@ #define EHCI_INSNREG05_ULPI_EXTREGADD_SHIFT 8 #define EHCI_INSNREG05_ULPI_WRDATA_SHIFT 0 -/*-------------------------------------------------------------------------*/ +#define DRIVER_DESC "OMAP-EHCI Host Controller driver" + +static const char hcd_name[] = "ehci-omap"; -static const struct hc_driver ehci_omap_hc_driver; +/*-------------------------------------------------------------------------*/ +struct omap_hcd { + struct usb_phy *phy[OMAP3_HS_USB_PORTS]; /* one PHY for each port */ + int nports; +}; static inline void ehci_write(void __iomem *base, u32 reg, u32 val) { @@ -72,99 +81,16 @@ static inline u32 ehci_read(void __iomem *base, u32 reg) return __raw_readl(base + reg); } +/* configure so an HC device and id are always provided */ +/* always called with process context; sleeping is OK */ -static void omap_ehci_soft_phy_reset(struct usb_hcd *hcd, u8 port) -{ - unsigned long timeout = jiffies + msecs_to_jiffies(1000); - unsigned reg = 0; - - reg = ULPI_FUNC_CTRL_RESET - /* FUNCTION_CTRL_SET register */ - | (ULPI_SET(ULPI_FUNC_CTRL) << EHCI_INSNREG05_ULPI_REGADD_SHIFT) - /* Write */ - | (2 << EHCI_INSNREG05_ULPI_OPSEL_SHIFT) - /* PORTn */ - | ((port + 1) << EHCI_INSNREG05_ULPI_PORTSEL_SHIFT) - /* start ULPI access*/ - | (1 << EHCI_INSNREG05_ULPI_CONTROL_SHIFT); - - ehci_write(hcd->regs, EHCI_INSNREG05_ULPI, reg); - - /* Wait for ULPI access completion */ - while ((ehci_read(hcd->regs, EHCI_INSNREG05_ULPI) - & (1 << EHCI_INSNREG05_ULPI_CONTROL_SHIFT))) { - cpu_relax(); - - if (time_after(jiffies, timeout)) { - dev_dbg(hcd->self.controller, - "phy reset operation timed out\n"); - break; - } - } -} - -static int omap_ehci_init(struct usb_hcd *hcd) -{ - struct ehci_hcd *ehci = hcd_to_ehci(hcd); - int rc; - struct usbhs_omap_platform_data *pdata; - - pdata = hcd->self.controller->platform_data; - - /* Hold PHYs in reset while initializing EHCI controller */ - if (pdata->phy_reset) { - if (gpio_is_valid(pdata->reset_gpio_port[0])) - gpio_set_value_cansleep(pdata->reset_gpio_port[0], 0); - - if (gpio_is_valid(pdata->reset_gpio_port[1])) - gpio_set_value_cansleep(pdata->reset_gpio_port[1], 0); - - /* Hold the PHY in RESET for enough time till DIR is high */ - udelay(10); - } - - /* Soft reset the PHY using PHY reset command over ULPI */ - if (pdata->port_mode[0] == OMAP_EHCI_PORT_MODE_PHY) - omap_ehci_soft_phy_reset(hcd, 0); - if (pdata->port_mode[1] == OMAP_EHCI_PORT_MODE_PHY) - omap_ehci_soft_phy_reset(hcd, 1); - - /* we know this is the memory we want, no need to ioremap again */ - ehci->caps = hcd->regs; - - rc = ehci_setup(hcd); - - if (pdata->phy_reset) { - /* Hold the PHY in RESET for enough time till - * PHY is settled and ready - */ - udelay(10); - - if (gpio_is_valid(pdata->reset_gpio_port[0])) - gpio_set_value_cansleep(pdata->reset_gpio_port[0], 1); - - if (gpio_is_valid(pdata->reset_gpio_port[1])) - gpio_set_value_cansleep(pdata->reset_gpio_port[1], 1); - } - - return rc; -} +static struct hc_driver __read_mostly ehci_omap_hc_driver; -static void disable_put_regulator( - struct usbhs_omap_platform_data *pdata) -{ - int i; - - for (i = 0 ; i < OMAP3_HS_USB_PORTS ; i++) { - if (pdata->regulator[i]) { - regulator_disable(pdata->regulator[i]); - regulator_put(pdata->regulator[i]); - } - } -} +static const struct ehci_driver_overrides ehci_omap_overrides __initdata = { + .extra_priv_size = sizeof(struct omap_hcd), +}; -/* configure so an HC device and id are always provided */ -/* always called with process context; sleeping is OK */ +static u64 omap_ehci_dma_mask = DMA_BIT_MASK(32); /** * ehci_hcd_omap_probe - initialize TI-based HCDs @@ -175,15 +101,15 @@ static void disable_put_regulator( */ static int ehci_hcd_omap_probe(struct platform_device *pdev) { - struct device *dev = &pdev->dev; - struct usbhs_omap_platform_data *pdata = dev->platform_data; - struct resource *res; - struct usb_hcd *hcd; - void __iomem *regs; - int ret = -ENODEV; - int irq; - int i; - char supply[7]; + struct device *dev = &pdev->dev; + struct usbhs_omap_platform_data *pdata = dev->platform_data; + struct resource *res; + struct usb_hcd *hcd; + void __iomem *regs; + int ret = -ENODEV; + int irq; + int i; + struct omap_hcd *omap; if (usb_disabled()) return -ENODEV; @@ -193,52 +119,74 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) return -ENODEV; } - irq = platform_get_irq_byname(pdev, "ehci-irq"); - if (irq < 0) { - dev_err(dev, "EHCI irq failed\n"); - return -ENODEV; + /* For DT boot, get platform data from parent. i.e. usbhshost */ + if (dev->of_node) { + pdata = dev->parent->platform_data; + dev->platform_data = pdata; } - res = platform_get_resource_byname(pdev, - IORESOURCE_MEM, "ehci"); - if (!res) { - dev_err(dev, "UHH EHCI get resource failed\n"); + if (!pdata) { + dev_err(dev, "Missing platform data\n"); return -ENODEV; } - regs = ioremap(res->start, resource_size(res)); - if (!regs) { - dev_err(dev, "UHH EHCI ioremap failed\n"); - return -ENOMEM; + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(dev, "EHCI irq failed\n"); + return -ENODEV; } + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + regs = devm_ioremap_resource(dev, res); + if (IS_ERR(regs)) + return PTR_ERR(regs); + + /* + * Right now device-tree probed devices don't get dma_mask set. + * Since shared usb code relies on it, set it here for now. + * Once we have dma capability bindings this can go away. + */ + if (!pdev->dev.dma_mask) + pdev->dev.dma_mask = &omap_ehci_dma_mask; + hcd = usb_create_hcd(&ehci_omap_hc_driver, dev, dev_name(dev)); if (!hcd) { - dev_err(dev, "failed to create hcd with err %d\n", ret); - ret = -ENOMEM; - goto err_io; + dev_err(dev, "Failed to create HCD\n"); + return -ENOMEM; } hcd->rsrc_start = res->start; hcd->rsrc_len = resource_size(res); hcd->regs = regs; - - /* get ehci regulator and enable */ - for (i = 0 ; i < OMAP3_HS_USB_PORTS ; i++) { - if (pdata->port_mode[i] != OMAP_EHCI_PORT_MODE_PHY) { - pdata->regulator[i] = NULL; - continue; - } - snprintf(supply, sizeof(supply), "hsusb%d", i); - pdata->regulator[i] = regulator_get(dev, supply); - if (IS_ERR(pdata->regulator[i])) { - pdata->regulator[i] = NULL; - dev_dbg(dev, - "failed to get ehci port%d regulator\n", i); - } else { - regulator_enable(pdata->regulator[i]); + hcd_to_ehci(hcd)->caps = regs; + + omap = (struct omap_hcd *)hcd_to_ehci(hcd)->priv; + omap->nports = pdata->nports; + + platform_set_drvdata(pdev, hcd); + + /* get the PHY devices if needed */ + for (i = 0 ; i < omap->nports ; i++) { + struct usb_phy *phy; + + /* get the PHY device */ + if (dev->of_node) + phy = devm_usb_get_phy_by_phandle(dev, "phys", i); + else + phy = devm_usb_get_phy_dev(dev, i); + if (IS_ERR(phy)) { + /* Don't bail out if PHY is not absolutely necessary */ + if (pdata->port_mode[i] != OMAP_EHCI_PORT_MODE_PHY) + continue; + + ret = PTR_ERR(phy); + dev_err(dev, "Can't get PHY device for port %d: %d\n", + i, ret); + goto err_phy; } + + omap->phy[i] = phy; } pm_runtime_enable(dev); @@ -262,16 +210,34 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) goto err_pm_runtime; } + /* + * Bring PHYs out of reset. + * Even though HSIC mode is a PHY-less mode, the reset + * line exists between the chips and can be modelled + * as a PHY device for reset control. + */ + for (i = 0; i < omap->nports; i++) { + if (!omap->phy[i]) + continue; + + usb_phy_init(omap->phy[i]); + /* bring PHY out of suspend */ + usb_phy_set_suspend(omap->phy[i], 0); + } return 0; err_pm_runtime: - disable_put_regulator(pdata); pm_runtime_put_sync(dev); + +err_phy: + for (i = 0; i < omap->nports; i++) { + if (omap->phy[i]) + usb_phy_shutdown(omap->phy[i]); + } + usb_put_hcd(hcd); -err_io: - iounmap(regs); return ret; } @@ -286,14 +252,19 @@ err_io: */ static int ehci_hcd_omap_remove(struct platform_device *pdev) { - struct device *dev = &pdev->dev; - struct usb_hcd *hcd = dev_get_drvdata(dev); + struct device *dev = &pdev->dev; + struct usb_hcd *hcd = dev_get_drvdata(dev); + struct omap_hcd *omap = (struct omap_hcd *)hcd_to_ehci(hcd)->priv; + int i; usb_remove_hcd(hcd); - disable_put_regulator(dev->platform_data); - iounmap(hcd->regs); - usb_put_hcd(hcd); + for (i = 0; i < omap->nports; i++) { + if (omap->phy[i]) + usb_phy_shutdown(omap->phy[i]); + } + + usb_put_hcd(hcd); pm_runtime_put_sync(dev); pm_runtime_disable(dev); @@ -308,6 +279,13 @@ static void ehci_hcd_omap_shutdown(struct platform_device *pdev) hcd->driver->shutdown(hcd); } +static const struct of_device_id omap_ehci_dt_ids[] = { + { .compatible = "ti,ehci-omap" }, + { } +}; + +MODULE_DEVICE_TABLE(of, omap_ehci_dt_ids); + static struct platform_driver ehci_hcd_omap_driver = { .probe = ehci_hcd_omap_probe, .remove = ehci_hcd_omap_remove, @@ -315,56 +293,35 @@ static struct platform_driver ehci_hcd_omap_driver = { /*.suspend = ehci_hcd_omap_suspend, */ /*.resume = ehci_hcd_omap_resume, */ .driver = { - .name = "ehci-omap", + .name = hcd_name, + .of_match_table = of_match_ptr(omap_ehci_dt_ids), } }; /*-------------------------------------------------------------------------*/ -static const struct hc_driver ehci_omap_hc_driver = { - .description = hcd_name, - .product_desc = "OMAP-EHCI Host Controller", - .hcd_priv_size = sizeof(struct ehci_hcd), - - /* - * generic hardware linkage - */ - .irq = ehci_irq, - .flags = HCD_MEMORY | HCD_USB2, - - /* - * basic lifecycle operations - */ - .reset = omap_ehci_init, - .start = ehci_run, - .stop = ehci_stop, - .shutdown = ehci_shutdown, - - /* - * managing i/o requests and associated device resources - */ - .urb_enqueue = ehci_urb_enqueue, - .urb_dequeue = ehci_urb_dequeue, - .endpoint_disable = ehci_endpoint_disable, - .endpoint_reset = ehci_endpoint_reset, +static int __init ehci_omap_init(void) +{ + if (usb_disabled()) + return -ENODEV; - /* - * scheduling support - */ - .get_frame_number = ehci_get_frame, + pr_info("%s: " DRIVER_DESC "\n", hcd_name); - /* - * root hub support - */ - .hub_status_data = ehci_hub_status_data, - .hub_control = ehci_hub_control, - .bus_suspend = ehci_bus_suspend, - .bus_resume = ehci_bus_resume, + ehci_init_driver(&ehci_omap_hc_driver, &ehci_omap_overrides); + return platform_driver_register(&ehci_hcd_omap_driver); +} +module_init(ehci_omap_init); - .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, -}; +static void __exit ehci_omap_cleanup(void) +{ + platform_driver_unregister(&ehci_hcd_omap_driver); +} +module_exit(ehci_omap_cleanup); MODULE_ALIAS("platform:ehci-omap"); MODULE_AUTHOR("Texas Instruments, Inc."); MODULE_AUTHOR("Felipe Balbi <felipe.balbi@nokia.com>"); +MODULE_AUTHOR("Roger Quadros <rogerq@ti.com>"); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c index 914a3ecfb5d..54c57948515 100644 --- a/drivers/usb/host/ehci-orion.c +++ b/drivers/usb/host/ehci-orion.c @@ -17,6 +17,12 @@ #include <linux/of.h> #include <linux/of_device.h> #include <linux/of_irq.h> +#include <linux/usb.h> +#include <linux/usb/hcd.h> +#include <linux/io.h> +#include <linux/dma-mapping.h> + +#include "ehci.h" #define rdl(off) __raw_readl(hcd->regs + (off)) #define wrl(off, val) __raw_writel((val), hcd->regs + (off)) @@ -34,6 +40,12 @@ #define USB_PHY_IVREF_CTRL 0x440 #define USB_PHY_TST_GRP_CTRL 0x450 +#define DRIVER_DESC "EHCI orion driver" + +static const char hcd_name[] = "ehci-orion"; + +static struct hc_driver __read_mostly ehci_orion_hc_driver; + /* * Implement Orion USB controller specification guidelines */ @@ -104,51 +116,6 @@ static void orion_usb_phy_v1_setup(struct usb_hcd *hcd) wrl(USB_MODE, 0x13); } -static const struct hc_driver ehci_orion_hc_driver = { - .description = hcd_name, - .product_desc = "Marvell Orion EHCI", - .hcd_priv_size = sizeof(struct ehci_hcd), - - /* - * generic hardware linkage - */ - .irq = ehci_irq, - .flags = HCD_MEMORY | HCD_USB2, - - /* - * basic lifecycle operations - */ - .reset = ehci_setup, - .start = ehci_run, - .stop = ehci_stop, - .shutdown = ehci_shutdown, - - /* - * managing i/o requests and associated device resources - */ - .urb_enqueue = ehci_urb_enqueue, - .urb_dequeue = ehci_urb_dequeue, - .endpoint_disable = ehci_endpoint_disable, - .endpoint_reset = ehci_endpoint_reset, - - /* - * scheduling support - */ - .get_frame_number = ehci_get_frame, - - /* - * root hub support - */ - .hub_status_data = ehci_hub_status_data, - .hub_control = ehci_hub_control, - .bus_suspend = ehci_bus_suspend, - .bus_resume = ehci_bus_resume, - .relinquish_port = ehci_relinquish_port, - .port_handed_over = ehci_port_handed_over, - - .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, -}; - static void ehci_orion_conf_mbus_windows(struct usb_hcd *hcd, const struct mbus_dram_target_info *dram) @@ -305,7 +272,7 @@ err1: return err; } -static int __exit ehci_orion_drv_remove(struct platform_device *pdev) +static int ehci_orion_drv_remove(struct platform_device *pdev) { struct usb_hcd *hcd = platform_get_drvdata(pdev); struct clk *clk; @@ -323,8 +290,6 @@ static int __exit ehci_orion_drv_remove(struct platform_device *pdev) return 0; } -MODULE_ALIAS("platform:orion-ehci"); - static const struct of_device_id ehci_orion_dt_ids[] = { { .compatible = "marvell,orion-ehci", }, {}, @@ -333,7 +298,7 @@ MODULE_DEVICE_TABLE(of, ehci_orion_dt_ids); static struct platform_driver ehci_orion_driver = { .probe = ehci_orion_drv_probe, - .remove = __exit_p(ehci_orion_drv_remove), + .remove = ehci_orion_drv_remove, .shutdown = usb_hcd_platform_shutdown, .driver = { .name = "orion-ehci", @@ -341,3 +306,26 @@ static struct platform_driver ehci_orion_driver = { .of_match_table = of_match_ptr(ehci_orion_dt_ids), }, }; + +static int __init ehci_orion_init(void) +{ + if (usb_disabled()) + return -ENODEV; + + pr_info("%s: " DRIVER_DESC "\n", hcd_name); + + ehci_init_driver(&ehci_orion_hc_driver, NULL); + return platform_driver_register(&ehci_orion_driver); +} +module_init(ehci_orion_init); + +static void __exit ehci_orion_cleanup(void) +{ + platform_driver_unregister(&ehci_orion_driver); +} +module_exit(ehci_orion_cleanup); + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_ALIAS("platform:orion-ehci"); +MODULE_AUTHOR("Tzachi Perelstein"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index 170b9399e09..595d210655b 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -292,17 +292,7 @@ static int ehci_pci_setup(struct usb_hcd *hcd) } } -#ifdef CONFIG_USB_SUSPEND - /* REVISIT: the controller works fine for wakeup iff the root hub - * itself is "globally" suspended, but usbcore currently doesn't - * understand such things. - * - * System suspend currently expects to be able to suspend the entire - * device tree, device-at-a-time. If we failed selective suspend - * reports, system suspend would fail; so the root hub code must claim - * success. That's lying to usbcore, and it matters for runtime - * PM scenarios with selective suspend and remote wakeup... - */ +#ifdef CONFIG_PM_RUNTIME if (ehci->no_selective_suspend && device_can_wakeup(&pdev->dev)) ehci_warn(ehci, "selective suspend/wakeup unavailable\n"); #endif @@ -385,7 +375,7 @@ static int ehci_pci_resume(struct usb_hcd *hcd, bool hibernated) static struct hc_driver __read_mostly ehci_pci_hc_driver; -static const struct ehci_driver_overrides pci_overrides __initdata = { +static const struct ehci_driver_overrides pci_overrides __initconst = { .reset = ehci_pci_setup, }; diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c index ca750639054..f47f2594c9d 100644 --- a/drivers/usb/host/ehci-platform.c +++ b/drivers/usb/host/ehci-platform.c @@ -18,11 +18,13 @@ * * Licensed under the GNU/GPL. See COPYING for details. */ +#include <linux/dma-mapping.h> #include <linux/err.h> #include <linux/kernel.h> #include <linux/hrtimer.h> #include <linux/io.h> #include <linux/module.h> +#include <linux/of.h> #include <linux/platform_device.h> #include <linux/usb.h> #include <linux/usb/hcd.h> @@ -58,26 +60,36 @@ static int ehci_platform_reset(struct usb_hcd *hcd) static struct hc_driver __read_mostly ehci_platform_hc_driver; -static const struct ehci_driver_overrides platform_overrides __initdata = { +static const struct ehci_driver_overrides platform_overrides __initconst = { .reset = ehci_platform_reset, }; +static struct usb_ehci_pdata ehci_platform_defaults; + static int ehci_platform_probe(struct platform_device *dev) { struct usb_hcd *hcd; struct resource *res_mem; - struct usb_ehci_pdata *pdata = dev->dev.platform_data; + struct usb_ehci_pdata *pdata; int irq; int err = -ENOMEM; - if (!pdata) { - WARN_ON(1); - return -ENODEV; - } - if (usb_disabled()) return -ENODEV; + /* + * use reasonable defaults so platforms don't have to provide these. + * with DT probing on ARM, none of these are set. + */ + if (!dev->dev.platform_data) + dev->dev.platform_data = &ehci_platform_defaults; + if (!dev->dev.dma_mask) + dev->dev.dma_mask = &dev->dev.coherent_dma_mask; + if (!dev->dev.coherent_dma_mask) + dev->dev.coherent_dma_mask = DMA_BIT_MASK(32); + + pdata = dev->dev.platform_data; + irq = platform_get_irq(dev, 0); if (irq < 0) { dev_err(&dev->dev, "no irq provided"); @@ -139,6 +151,9 @@ static int ehci_platform_remove(struct platform_device *dev) if (pdata->power_off) pdata->power_off(dev); + if (pdata == &ehci_platform_defaults) + dev->dev.platform_data = NULL; + return 0; } @@ -183,6 +198,12 @@ static int ehci_platform_resume(struct device *dev) #define ehci_platform_resume NULL #endif /* CONFIG_PM */ +static const struct of_device_id vt8500_ehci_ids[] = { + { .compatible = "via,vt8500-ehci", }, + { .compatible = "wm,prizm-ehci", }, + {} +}; + static const struct platform_device_id ehci_platform_table[] = { { "ehci-platform", 0 }, { } @@ -203,6 +224,7 @@ static struct platform_driver ehci_platform_driver = { .owner = THIS_MODULE, .name = "ehci-platform", .pm = &ehci_platform_pm_ops, + .of_match_table = of_match_ptr(vt8500_ehci_ids), } }; diff --git a/drivers/usb/host/ehci-ps3.c b/drivers/usb/host/ehci-ps3.c index df5925a4f0d..fd983771b02 100644 --- a/drivers/usb/host/ehci-ps3.c +++ b/drivers/usb/host/ehci-ps3.c @@ -221,7 +221,6 @@ static int ps3_ehci_remove(struct ps3_system_bus_device *dev) tmp = hcd->irq; - ehci_shutdown(hcd); usb_remove_hcd(hcd); ps3_system_bus_set_drvdata(dev, NULL); diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c index 23d13690428..d34b399b78e 100644 --- a/drivers/usb/host/ehci-q.c +++ b/drivers/usb/host/ehci-q.c @@ -90,7 +90,7 @@ qh_update (struct ehci_hcd *ehci, struct ehci_qh *qh, struct ehci_qtd *qtd) struct ehci_qh_hw *hw = qh->hw; /* writes to an active overlay are unsafe */ - BUG_ON(qh->qh_state != QH_STATE_IDLE); + WARN_ON(qh->qh_state != QH_STATE_IDLE); hw->hw_qtd_next = QTD_NEXT(ehci, qtd->qtd_dma); hw->hw_alt_next = EHCI_LIST_END(ehci); @@ -123,26 +123,19 @@ qh_refresh (struct ehci_hcd *ehci, struct ehci_qh *qh) { struct ehci_qtd *qtd; - if (list_empty (&qh->qtd_list)) - qtd = qh->dummy; - else { - qtd = list_entry (qh->qtd_list.next, - struct ehci_qtd, qtd_list); - /* - * first qtd may already be partially processed. - * If we come here during unlink, the QH overlay region - * might have reference to the just unlinked qtd. The - * qtd is updated in qh_completions(). Update the QH - * overlay here. - */ - if (qh->hw->hw_token & ACTIVE_BIT(ehci)) { - qh->hw->hw_qtd_next = qtd->hw_next; - qtd = NULL; - } - } + qtd = list_entry(qh->qtd_list.next, struct ehci_qtd, qtd_list); - if (qtd) - qh_update (ehci, qh, qtd); + /* + * first qtd may already be partially processed. + * If we come here during unlink, the QH overlay region + * might have reference to the just unlinked qtd. The + * qtd is updated in qh_completions(). Update the QH + * overlay here. + */ + if (qh->hw->hw_token & ACTIVE_BIT(ehci)) + qh->hw->hw_qtd_next = qtd->hw_next; + else + qh_update(ehci, qh, qtd); } /*-------------------------------------------------------------------------*/ @@ -299,8 +292,8 @@ static int qh_schedule (struct ehci_hcd *ehci, struct ehci_qh *qh); /* * Process and free completed qtds for a qh, returning URBs to drivers. - * Chases up to qh->hw_current. Returns number of completions called, - * indicating how much "real" work we did. + * Chases up to qh->hw_current. Returns nonzero if the caller should + * unlink qh. */ static unsigned qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh) @@ -309,13 +302,9 @@ qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh) struct list_head *entry, *tmp; int last_status; int stopped; - unsigned count = 0; u8 state; struct ehci_qh_hw *hw = qh->hw; - if (unlikely (list_empty (&qh->qtd_list))) - return count; - /* completions (or tasks on other cpus) must never clobber HALT * till we've gone through and cleaned everything up, even when * they add urbs to this qh's queue or mark them for unlinking. @@ -333,7 +322,7 @@ qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh) rescan: last = NULL; last_status = -EINPROGRESS; - qh->needs_rescan = 0; + qh->dequeue_during_giveback = 0; /* remove de-activated QTDs from front of queue. * after faults (including short reads), cleanup this urb @@ -352,7 +341,6 @@ qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh) if (last) { if (likely (last->urb != urb)) { ehci_urb_done(ehci, last->urb, last_status); - count++; last_status = -EINPROGRESS; } ehci_qtd_free (ehci, last); @@ -526,23 +514,16 @@ qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh) /* last urb's completion might still need calling */ if (likely (last != NULL)) { ehci_urb_done(ehci, last->urb, last_status); - count++; ehci_qtd_free (ehci, last); } /* Do we need to rescan for URBs dequeued during a giveback? */ - if (unlikely(qh->needs_rescan)) { + if (unlikely(qh->dequeue_during_giveback)) { /* If the QH is already unlinked, do the rescan now. */ if (state == QH_STATE_IDLE) goto rescan; - /* Otherwise we have to wait until the QH is fully unlinked. - * Our caller will start an unlink if qh->needs_rescan is - * set. But if an unlink has already started, nothing needs - * to be done. - */ - if (state != QH_STATE_LINKED) - qh->needs_rescan = 0; + /* Otherwise the caller must unlink the QH. */ } /* restore original state; caller must unlink or relink */ @@ -551,33 +532,23 @@ qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh) /* be sure the hardware's done with the qh before refreshing * it after fault cleanup, or recovering from silicon wrongly * overlaying the dummy qtd (which reduces DMA chatter). + * + * We won't refresh a QH that's linked (after the HC + * stopped the queue). That avoids a race: + * - HC reads first part of QH; + * - CPU updates that first part and the token; + * - HC reads rest of that QH, including token + * Result: HC gets an inconsistent image, and then + * DMAs to/from the wrong memory (corrupting it). + * + * That should be rare for interrupt transfers, + * except maybe high bandwidth ... */ - if (stopped != 0 || hw->hw_qtd_next == EHCI_LIST_END(ehci)) { - switch (state) { - case QH_STATE_IDLE: - qh_refresh(ehci, qh); - break; - case QH_STATE_LINKED: - /* We won't refresh a QH that's linked (after the HC - * stopped the queue). That avoids a race: - * - HC reads first part of QH; - * - CPU updates that first part and the token; - * - HC reads rest of that QH, including token - * Result: HC gets an inconsistent image, and then - * DMAs to/from the wrong memory (corrupting it). - * - * That should be rare for interrupt transfers, - * except maybe high bandwidth ... - */ + if (stopped != 0 || hw->hw_qtd_next == EHCI_LIST_END(ehci)) + qh->exception = 1; - /* Tell the caller to start an unlink */ - qh->needs_rescan = 1; - break; - /* otherwise, unlink already started */ - } - } - - return count; + /* Let the caller know if the QH needs to be unlinked. */ + return qh->exception; } /*-------------------------------------------------------------------------*/ @@ -957,14 +928,13 @@ done: /* NOTE: if (PIPE_INTERRUPT) { scheduler sets s-mask } */ - /* init as live, toggle clear, advance to dummy */ + /* init as live, toggle clear */ qh->qh_state = QH_STATE_IDLE; hw = qh->hw; hw->hw_info1 = cpu_to_hc32(ehci, info1); hw->hw_info2 = cpu_to_hc32(ehci, info2); qh->is_out = !is_input; usb_settoggle (urb->dev, usb_pipeendpoint (urb->pipe), !is_input, 1); - qh_refresh (ehci, qh); return qh; } @@ -988,8 +958,9 @@ static void disable_async(struct ehci_hcd *ehci) if (--ehci->async_count) return; - /* The async schedule and async_unlink list are supposed to be empty */ - WARN_ON(ehci->async->qh_next.qh || ehci->async_unlink); + /* The async schedule and unlink lists are supposed to be empty */ + WARN_ON(ehci->async->qh_next.qh || !list_empty(&ehci->async_unlink) || + !list_empty(&ehci->async_idle)); /* Don't turn off the schedule until ASS is 1 */ ehci_poll_ASS(ehci); @@ -1020,8 +991,9 @@ static void qh_link_async (struct ehci_hcd *ehci, struct ehci_qh *qh) head->qh_next.qh = qh; head->hw->hw_next = dma; - qh->xacterrs = 0; qh->qh_state = QH_STATE_LINKED; + qh->xacterrs = 0; + qh->exception = 0; /* qtd completions reported later by interrupt */ enable_async(ehci); @@ -1179,11 +1151,7 @@ static void single_unlink_async(struct ehci_hcd *ehci, struct ehci_qh *qh) /* Add to the end of the list of QHs waiting for the next IAAD */ qh->qh_state = QH_STATE_UNLINK_WAIT; - if (ehci->async_unlink) - ehci->async_unlink_last->unlink_next = qh; - else - ehci->async_unlink = qh; - ehci->async_unlink_last = qh; + list_add_tail(&qh->unlink_node, &ehci->async_unlink); /* Unlink it from the schedule */ prev = ehci->async; @@ -1196,44 +1164,19 @@ static void single_unlink_async(struct ehci_hcd *ehci, struct ehci_qh *qh) ehci->qh_scan_next = qh->qh_next.qh; } -static void start_iaa_cycle(struct ehci_hcd *ehci, bool nested) +static void start_iaa_cycle(struct ehci_hcd *ehci) { - /* - * Do nothing if an IAA cycle is already running or - * if one will be started shortly. - */ - if (ehci->async_iaa || ehci->async_unlinking) + /* Do nothing if an IAA cycle is already running */ + if (ehci->iaa_in_progress) return; + ehci->iaa_in_progress = true; /* If the controller isn't running, we don't have to wait for it */ if (unlikely(ehci->rh_state < EHCI_RH_RUNNING)) { - - /* Do all the waiting QHs */ - ehci->async_iaa = ehci->async_unlink; - ehci->async_unlink = NULL; - - if (!nested) /* Avoid recursion */ - end_unlink_async(ehci); + end_unlink_async(ehci); /* Otherwise start a new IAA cycle */ } else if (likely(ehci->rh_state == EHCI_RH_RUNNING)) { - struct ehci_qh *qh; - - /* Do only the first waiting QH (nVidia bug?) */ - qh = ehci->async_unlink; - - /* - * Intel (?) bug: The HC can write back the overlay region - * even after the IAA interrupt occurs. In self-defense, - * always go through two IAA cycles for each QH. - */ - if (qh->qh_state == QH_STATE_UNLINK_WAIT) { - qh->qh_state = QH_STATE_UNLINK; - } else { - ehci->async_iaa = qh; - ehci->async_unlink = qh->unlink_next; - qh->unlink_next = NULL; - } /* Make sure the unlinks are all visible to the hardware */ wmb(); @@ -1250,36 +1193,73 @@ static void start_iaa_cycle(struct ehci_hcd *ehci, bool nested) static void end_unlink_async(struct ehci_hcd *ehci) { struct ehci_qh *qh; + bool early_exit; if (ehci->has_synopsys_hc_bug) ehci_writel(ehci, (u32) ehci->async->qh_dma, &ehci->regs->async_next); + /* The current IAA cycle has ended */ + ehci->iaa_in_progress = false; + + if (list_empty(&ehci->async_unlink)) + return; + qh = list_first_entry(&ehci->async_unlink, struct ehci_qh, + unlink_node); /* QH whose IAA cycle just ended */ + + /* + * If async_unlinking is set then this routine is already running, + * either on the stack or on another CPU. + */ + early_exit = ehci->async_unlinking; + + /* If the controller isn't running, process all the waiting QHs */ + if (ehci->rh_state < EHCI_RH_RUNNING) + list_splice_tail_init(&ehci->async_unlink, &ehci->async_idle); + + /* + * Intel (?) bug: The HC can write back the overlay region even + * after the IAA interrupt occurs. In self-defense, always go + * through two IAA cycles for each QH. + */ + else if (qh->qh_state == QH_STATE_UNLINK_WAIT) { + qh->qh_state = QH_STATE_UNLINK; + early_exit = true; + } + + /* Otherwise process only the first waiting QH (NVIDIA bug?) */ + else + list_move_tail(&qh->unlink_node, &ehci->async_idle); + + /* Start a new IAA cycle if any QHs are waiting for it */ + if (!list_empty(&ehci->async_unlink)) + start_iaa_cycle(ehci); + + /* + * Don't allow nesting or concurrent calls, + * or wait for the second IAA cycle for the next QH. + */ + if (early_exit) + return; + /* Process the idle QHs */ - restart: ehci->async_unlinking = true; - while (ehci->async_iaa) { - qh = ehci->async_iaa; - ehci->async_iaa = qh->unlink_next; - qh->unlink_next = NULL; + while (!list_empty(&ehci->async_idle)) { + qh = list_first_entry(&ehci->async_idle, struct ehci_qh, + unlink_node); + list_del(&qh->unlink_node); qh->qh_state = QH_STATE_IDLE; qh->qh_next.qh = NULL; - qh_completions(ehci, qh); + if (!list_empty(&qh->qtd_list)) + qh_completions(ehci, qh); if (!list_empty(&qh->qtd_list) && ehci->rh_state == EHCI_RH_RUNNING) qh_link_async(ehci, qh); disable_async(ehci); } ehci->async_unlinking = false; - - /* Start a new IAA cycle if any QHs are waiting for it */ - if (ehci->async_unlink) { - start_iaa_cycle(ehci, true); - if (unlikely(ehci->rh_state < EHCI_RH_RUNNING)) - goto restart; - } } static void start_unlink_async(struct ehci_hcd *ehci, struct ehci_qh *qh); @@ -1288,7 +1268,6 @@ static void unlink_empty_async(struct ehci_hcd *ehci) { struct ehci_qh *qh; struct ehci_qh *qh_to_unlink = NULL; - bool check_unlinks_later = false; int count = 0; /* Find the last async QH which has been empty for a timer cycle */ @@ -1296,15 +1275,13 @@ static void unlink_empty_async(struct ehci_hcd *ehci) if (list_empty(&qh->qtd_list) && qh->qh_state == QH_STATE_LINKED) { ++count; - if (qh->unlink_cycle == ehci->async_unlink_cycle) - check_unlinks_later = true; - else + if (qh->unlink_cycle != ehci->async_unlink_cycle) qh_to_unlink = qh; } } /* If nothing else is being unlinked, unlink the last empty QH */ - if (!ehci->async_iaa && !ehci->async_unlink && qh_to_unlink) { + if (list_empty(&ehci->async_unlink) && qh_to_unlink) { start_unlink_async(ehci, qh_to_unlink); --count; } @@ -1317,7 +1294,7 @@ static void unlink_empty_async(struct ehci_hcd *ehci) } /* The root hub is suspended; unlink all the async QHs */ -static void unlink_empty_async_suspended(struct ehci_hcd *ehci) +static void __maybe_unused unlink_empty_async_suspended(struct ehci_hcd *ehci) { struct ehci_qh *qh; @@ -1326,7 +1303,7 @@ static void unlink_empty_async_suspended(struct ehci_hcd *ehci) WARN_ON(!list_empty(&qh->qtd_list)); single_unlink_async(ehci, qh); } - start_iaa_cycle(ehci, false); + start_iaa_cycle(ehci); } /* makes sure the async qh will become idle */ @@ -1334,19 +1311,12 @@ static void unlink_empty_async_suspended(struct ehci_hcd *ehci) static void start_unlink_async(struct ehci_hcd *ehci, struct ehci_qh *qh) { - /* - * If the QH isn't linked then there's nothing we can do - * unless we were called during a giveback, in which case - * qh_completions() has to deal with it. - */ - if (qh->qh_state != QH_STATE_LINKED) { - if (qh->qh_state == QH_STATE_COMPLETING) - qh->needs_rescan = 1; + /* If the QH isn't linked then there's nothing we can do. */ + if (qh->qh_state != QH_STATE_LINKED) return; - } single_unlink_async(ehci, qh); - start_iaa_cycle(ehci, false); + start_iaa_cycle(ehci); } /*-------------------------------------------------------------------------*/ @@ -1360,7 +1330,7 @@ static void scan_async (struct ehci_hcd *ehci) while (ehci->qh_scan_next) { qh = ehci->qh_scan_next; ehci->qh_scan_next = qh->qh_next.qh; - rescan: + /* clean any finished work for this qh */ if (!list_empty(&qh->qtd_list)) { int temp; @@ -1373,14 +1343,13 @@ static void scan_async (struct ehci_hcd *ehci) * in single_unlink_async(). */ temp = qh_completions(ehci, qh); - if (qh->needs_rescan) { + if (unlikely(temp)) { start_unlink_async(ehci, qh); } else if (list_empty(&qh->qtd_list) && qh->qh_state == QH_STATE_LINKED) { qh->unlink_cycle = ehci->async_unlink_cycle; check_unlinks_later = true; - } else if (temp != 0) - goto rescan; + } } } diff --git a/drivers/usb/host/ehci-s5p.c b/drivers/usb/host/ehci-s5p.c index 20ebf6a8b7f..635775278c7 100644 --- a/drivers/usb/host/ehci-s5p.c +++ b/drivers/usb/host/ehci-s5p.c @@ -13,13 +13,23 @@ */ #include <linux/clk.h> +#include <linux/dma-mapping.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> #include <linux/of.h> -#include <linux/platform_device.h> #include <linux/of_gpio.h> +#include <linux/platform_device.h> #include <linux/platform_data/usb-ehci-s5p.h> #include <linux/usb/phy.h> #include <linux/usb/samsung_usb_phy.h> -#include <plat/usb-phy.h> +#include <linux/usb.h> +#include <linux/usb/hcd.h> +#include <linux/usb/otg.h> + +#include "ehci.h" + +#define DRIVER_DESC "EHCI s5p driver" #define EHCI_INSNREG00(base) (base + 0x90) #define EHCI_INSNREG00_ENA_INCR16 (0x1 << 25) @@ -30,82 +40,35 @@ (EHCI_INSNREG00_ENA_INCR16 | EHCI_INSNREG00_ENA_INCR8 | \ EHCI_INSNREG00_ENA_INCR4 | EHCI_INSNREG00_ENA_INCRX_ALIGN) +static const char hcd_name[] = "ehci-s5p"; +static struct hc_driver __read_mostly s5p_ehci_hc_driver; + struct s5p_ehci_hcd { - struct device *dev; - struct usb_hcd *hcd; struct clk *clk; struct usb_phy *phy; struct usb_otg *otg; struct s5p_ehci_platdata *pdata; }; -static const struct hc_driver s5p_ehci_hc_driver = { - .description = hcd_name, - .product_desc = "S5P EHCI Host Controller", - .hcd_priv_size = sizeof(struct ehci_hcd), - - .irq = ehci_irq, - .flags = HCD_MEMORY | HCD_USB2, - - .reset = ehci_setup, - .start = ehci_run, - .stop = ehci_stop, - .shutdown = ehci_shutdown, - - .get_frame_number = ehci_get_frame, - - .urb_enqueue = ehci_urb_enqueue, - .urb_dequeue = ehci_urb_dequeue, - .endpoint_disable = ehci_endpoint_disable, - .endpoint_reset = ehci_endpoint_reset, - - .hub_status_data = ehci_hub_status_data, - .hub_control = ehci_hub_control, - .bus_suspend = ehci_bus_suspend, - .bus_resume = ehci_bus_resume, - - .relinquish_port = ehci_relinquish_port, - .port_handed_over = ehci_port_handed_over, - - .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, -}; - -static void s5p_ehci_phy_enable(struct s5p_ehci_hcd *s5p_ehci) -{ - struct platform_device *pdev = to_platform_device(s5p_ehci->dev); - - if (s5p_ehci->phy) - usb_phy_init(s5p_ehci->phy); - else if (s5p_ehci->pdata->phy_init) - s5p_ehci->pdata->phy_init(pdev, USB_PHY_TYPE_HOST); -} - -static void s5p_ehci_phy_disable(struct s5p_ehci_hcd *s5p_ehci) -{ - struct platform_device *pdev = to_platform_device(s5p_ehci->dev); - - if (s5p_ehci->phy) - usb_phy_shutdown(s5p_ehci->phy); - else if (s5p_ehci->pdata->phy_exit) - s5p_ehci->pdata->phy_exit(pdev, USB_PHY_TYPE_HOST); -} +#define to_s5p_ehci(hcd) (struct s5p_ehci_hcd *)(hcd_to_ehci(hcd)->priv) static void s5p_setup_vbus_gpio(struct platform_device *pdev) { + struct device *dev = &pdev->dev; int err; int gpio; - if (!pdev->dev.of_node) + if (!dev->of_node) return; - gpio = of_get_named_gpio(pdev->dev.of_node, - "samsung,vbus-gpio", 0); + gpio = of_get_named_gpio(dev->of_node, "samsung,vbus-gpio", 0); if (!gpio_is_valid(gpio)) return; - err = gpio_request_one(gpio, GPIOF_OUT_INIT_HIGH, "ehci_vbus_gpio"); + err = devm_gpio_request_one(dev, gpio, GPIOF_OUT_INIT_HIGH, + "ehci_vbus_gpio"); if (err) - dev_err(&pdev->dev, "can't request ehci vbus gpio %d", gpio); + dev_err(dev, "can't request ehci vbus gpio %d", gpio); } static u64 ehci_s5p_dma_mask = DMA_BIT_MASK(32); @@ -133,13 +96,15 @@ static int s5p_ehci_probe(struct platform_device *pdev) s5p_setup_vbus_gpio(pdev); - s5p_ehci = devm_kzalloc(&pdev->dev, sizeof(struct s5p_ehci_hcd), - GFP_KERNEL); - if (!s5p_ehci) + hcd = usb_create_hcd(&s5p_ehci_hc_driver, + &pdev->dev, dev_name(&pdev->dev)); + if (!hcd) { + dev_err(&pdev->dev, "Unable to create HCD\n"); return -ENOMEM; - + } + s5p_ehci = to_s5p_ehci(hcd); phy = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2); - if (IS_ERR_OR_NULL(phy)) { + if (IS_ERR(phy)) { /* Fallback to pdata */ if (!pdata) { dev_warn(&pdev->dev, "no platform data or transceiver defined\n"); @@ -152,16 +117,6 @@ static int s5p_ehci_probe(struct platform_device *pdev) s5p_ehci->otg = phy->otg; } - s5p_ehci->dev = &pdev->dev; - - hcd = usb_create_hcd(&s5p_ehci_hc_driver, &pdev->dev, - dev_name(&pdev->dev)); - if (!hcd) { - dev_err(&pdev->dev, "Unable to create HCD\n"); - return -ENOMEM; - } - - s5p_ehci->hcd = hcd; s5p_ehci->clk = devm_clk_get(&pdev->dev, "usbhost"); if (IS_ERR(s5p_ehci->clk)) { @@ -198,9 +153,12 @@ static int s5p_ehci_probe(struct platform_device *pdev) } if (s5p_ehci->otg) - s5p_ehci->otg->set_host(s5p_ehci->otg, &s5p_ehci->hcd->self); + s5p_ehci->otg->set_host(s5p_ehci->otg, &hcd->self); - s5p_ehci_phy_enable(s5p_ehci); + if (s5p_ehci->phy) + usb_phy_init(s5p_ehci->phy); + else if (s5p_ehci->pdata->phy_init) + s5p_ehci->pdata->phy_init(pdev, USB_PHY_TYPE_HOST); ehci = hcd_to_ehci(hcd); ehci->caps = hcd->regs; @@ -214,12 +172,15 @@ static int s5p_ehci_probe(struct platform_device *pdev) goto fail_add_hcd; } - platform_set_drvdata(pdev, s5p_ehci); + platform_set_drvdata(pdev, hcd); return 0; fail_add_hcd: - s5p_ehci_phy_disable(s5p_ehci); + if (s5p_ehci->phy) + usb_phy_shutdown(s5p_ehci->phy); + else if (s5p_ehci->pdata->phy_exit) + s5p_ehci->pdata->phy_exit(pdev, USB_PHY_TYPE_HOST); fail_io: clk_disable_unprepare(s5p_ehci->clk); fail_clk: @@ -229,15 +190,18 @@ fail_clk: static int s5p_ehci_remove(struct platform_device *pdev) { - struct s5p_ehci_hcd *s5p_ehci = platform_get_drvdata(pdev); - struct usb_hcd *hcd = s5p_ehci->hcd; + struct usb_hcd *hcd = platform_get_drvdata(pdev); + struct s5p_ehci_hcd *s5p_ehci = to_s5p_ehci(hcd); usb_remove_hcd(hcd); if (s5p_ehci->otg) - s5p_ehci->otg->set_host(s5p_ehci->otg, &s5p_ehci->hcd->self); + s5p_ehci->otg->set_host(s5p_ehci->otg, &hcd->self); - s5p_ehci_phy_disable(s5p_ehci); + if (s5p_ehci->phy) + usb_phy_shutdown(s5p_ehci->phy); + else if (s5p_ehci->pdata->phy_exit) + s5p_ehci->pdata->phy_exit(pdev, USB_PHY_TYPE_HOST); clk_disable_unprepare(s5p_ehci->clk); @@ -248,8 +212,7 @@ static int s5p_ehci_remove(struct platform_device *pdev) static void s5p_ehci_shutdown(struct platform_device *pdev) { - struct s5p_ehci_hcd *s5p_ehci = platform_get_drvdata(pdev); - struct usb_hcd *hcd = s5p_ehci->hcd; + struct usb_hcd *hcd = platform_get_drvdata(pdev); if (hcd->driver->shutdown) hcd->driver->shutdown(hcd); @@ -258,17 +221,22 @@ static void s5p_ehci_shutdown(struct platform_device *pdev) #ifdef CONFIG_PM static int s5p_ehci_suspend(struct device *dev) { - struct s5p_ehci_hcd *s5p_ehci = dev_get_drvdata(dev); - struct usb_hcd *hcd = s5p_ehci->hcd; + struct usb_hcd *hcd = dev_get_drvdata(dev); + struct s5p_ehci_hcd *s5p_ehci = to_s5p_ehci(hcd); + struct platform_device *pdev = to_platform_device(dev); + bool do_wakeup = device_may_wakeup(dev); int rc; rc = ehci_suspend(hcd, do_wakeup); if (s5p_ehci->otg) - s5p_ehci->otg->set_host(s5p_ehci->otg, &s5p_ehci->hcd->self); + s5p_ehci->otg->set_host(s5p_ehci->otg, &hcd->self); - s5p_ehci_phy_disable(s5p_ehci); + if (s5p_ehci->phy) + usb_phy_shutdown(s5p_ehci->phy); + else if (s5p_ehci->pdata->phy_exit) + s5p_ehci->pdata->phy_exit(pdev, USB_PHY_TYPE_HOST); clk_disable_unprepare(s5p_ehci->clk); @@ -277,15 +245,19 @@ static int s5p_ehci_suspend(struct device *dev) static int s5p_ehci_resume(struct device *dev) { - struct s5p_ehci_hcd *s5p_ehci = dev_get_drvdata(dev); - struct usb_hcd *hcd = s5p_ehci->hcd; + struct usb_hcd *hcd = dev_get_drvdata(dev); + struct s5p_ehci_hcd *s5p_ehci = to_s5p_ehci(hcd); + struct platform_device *pdev = to_platform_device(dev); clk_prepare_enable(s5p_ehci->clk); if (s5p_ehci->otg) - s5p_ehci->otg->set_host(s5p_ehci->otg, &s5p_ehci->hcd->self); + s5p_ehci->otg->set_host(s5p_ehci->otg, &hcd->self); - s5p_ehci_phy_enable(s5p_ehci); + if (s5p_ehci->phy) + usb_phy_init(s5p_ehci->phy); + else if (s5p_ehci->pdata->phy_init) + s5p_ehci->pdata->phy_init(pdev, USB_PHY_TYPE_HOST); /* DMA burst Enable */ writel(EHCI_INSNREG00_ENABLE_DMA_BURST, EHCI_INSNREG00(hcd->regs)); @@ -322,5 +294,29 @@ static struct platform_driver s5p_ehci_driver = { .of_match_table = of_match_ptr(exynos_ehci_match), } }; +static const struct ehci_driver_overrides s5p_overrides __initdata = { + .extra_priv_size = sizeof(struct s5p_ehci_hcd), +}; + +static int __init ehci_s5p_init(void) +{ + if (usb_disabled()) + return -ENODEV; + + pr_info("%s: " DRIVER_DESC "\n", hcd_name); + ehci_init_driver(&s5p_ehci_hc_driver, &s5p_overrides); + return platform_driver_register(&s5p_ehci_driver); +} +module_init(ehci_s5p_init); + +static void __exit ehci_s5p_cleanup(void) +{ + platform_driver_unregister(&s5p_ehci_driver); +} +module_exit(ehci_s5p_cleanup); +MODULE_DESCRIPTION(DRIVER_DESC); MODULE_ALIAS("platform:s5p-ehci"); +MODULE_AUTHOR("Jingoo Han"); +MODULE_AUTHOR("Joonyoung Shim"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c index 010f686d888..acff5b8f6e8 100644 --- a/drivers/usb/host/ehci-sched.c +++ b/drivers/usb/host/ehci-sched.c @@ -539,6 +539,7 @@ static void qh_link_periodic(struct ehci_hcd *ehci, struct ehci_qh *qh) } qh->qh_state = QH_STATE_LINKED; qh->xacterrs = 0; + qh->exception = 0; /* update per-qh bandwidth for usbfs */ ehci_to_hcd(ehci)->self.bandwidth_allocated += qh->period @@ -602,15 +603,9 @@ static void qh_unlink_periodic(struct ehci_hcd *ehci, struct ehci_qh *qh) static void start_unlink_intr(struct ehci_hcd *ehci, struct ehci_qh *qh) { - /* If the QH isn't linked then there's nothing we can do - * unless we were called during a giveback, in which case - * qh_completions() has to deal with it. - */ - if (qh->qh_state != QH_STATE_LINKED) { - if (qh->qh_state == QH_STATE_COMPLETING) - qh->needs_rescan = 1; + /* If the QH isn't linked then there's nothing we can do. */ + if (qh->qh_state != QH_STATE_LINKED) return; - } qh_unlink_periodic (ehci, qh); @@ -625,17 +620,13 @@ static void start_unlink_intr(struct ehci_hcd *ehci, struct ehci_qh *qh) qh->unlink_cycle = ehci->intr_unlink_cycle; /* New entries go at the end of the intr_unlink list */ - if (ehci->intr_unlink) - ehci->intr_unlink_last->unlink_next = qh; - else - ehci->intr_unlink = qh; - ehci->intr_unlink_last = qh; + list_add_tail(&qh->unlink_node, &ehci->intr_unlink); if (ehci->intr_unlinking) ; /* Avoid recursive calls */ else if (ehci->rh_state < EHCI_RH_RUNNING) ehci_handle_intr_unlinks(ehci); - else if (ehci->intr_unlink == qh) { + else if (ehci->intr_unlink.next == &qh->unlink_node) { ehci_enable_event(ehci, EHCI_HRTIMER_UNLINK_INTR, true); ++ehci->intr_unlink_cycle; } @@ -649,7 +640,8 @@ static void end_unlink_intr(struct ehci_hcd *ehci, struct ehci_qh *qh) qh->qh_state = QH_STATE_IDLE; hw->hw_next = EHCI_LIST_END(ehci); - qh_completions(ehci, qh); + if (!list_empty(&qh->qtd_list)) + qh_completions(ehci, qh); /* reschedule QH iff another request is queued */ if (!list_empty(&qh->qtd_list) && ehci->rh_state == EHCI_RH_RUNNING) { @@ -792,7 +784,6 @@ static int qh_schedule(struct ehci_hcd *ehci, struct ehci_qh *qh) unsigned frame; /* 0..(qh->period - 1), or NO_FRAME */ struct ehci_qh_hw *hw = qh->hw; - qh_refresh(ehci, qh); hw->hw_next = EHCI_LIST_END(ehci); frame = qh->start; @@ -844,8 +835,6 @@ static int qh_schedule(struct ehci_hcd *ehci, struct ehci_qh *qh) } else ehci_dbg (ehci, "reused qh %p schedule\n", qh); - /* stuff into the periodic schedule */ - qh_link_periodic(ehci, qh); done: return status; } @@ -891,6 +880,12 @@ static int intr_submit ( qh = qh_append_tds(ehci, urb, qtd_list, epnum, &urb->ep->hcpriv); BUG_ON (qh == NULL); + /* stuff into the periodic schedule */ + if (qh->qh_state == QH_STATE_IDLE) { + qh_refresh(ehci, qh); + qh_link_periodic(ehci, qh); + } + /* ... update usbfs periodic stats */ ehci_to_hcd(ehci)->self.bandwidth_int_reqs++; @@ -911,7 +906,7 @@ static void scan_intr(struct ehci_hcd *ehci) list_for_each_entry_safe(qh, ehci->qh_scan_next, &ehci->intr_qh_list, intr_node) { - rescan: + /* clean any finished work for this qh */ if (!list_empty(&qh->qtd_list)) { int temp; @@ -924,12 +919,9 @@ static void scan_intr(struct ehci_hcd *ehci) * in qh_unlink_periodic(). */ temp = qh_completions(ehci, qh); - if (unlikely(qh->needs_rescan || - (list_empty(&qh->qtd_list) && - qh->qh_state == QH_STATE_LINKED))) + if (unlikely(temp || (list_empty(&qh->qtd_list) && + qh->qh_state == QH_STATE_LINKED))) start_unlink_intr(ehci, qh); - else if (temp != 0) - goto rescan; } } } diff --git a/drivers/usb/host/ehci-sh.c b/drivers/usb/host/ehci-sh.c index 3565a300f40..b44d716ddc8 100644 --- a/drivers/usb/host/ehci-sh.c +++ b/drivers/usb/host/ehci-sh.c @@ -77,7 +77,6 @@ static const struct hc_driver ehci_sh_hc_driver = { static int ehci_hcd_sh_probe(struct platform_device *pdev) { - const struct hc_driver *driver = &ehci_sh_hc_driver; struct resource *res; struct ehci_sh_priv *priv; struct ehci_sh_platdata *pdata; @@ -170,7 +169,7 @@ fail_create_hcd: return ret; } -static int __exit ehci_hcd_sh_remove(struct platform_device *pdev) +static int ehci_hcd_sh_remove(struct platform_device *pdev) { struct ehci_sh_priv *priv = platform_get_drvdata(pdev); struct usb_hcd *hcd = priv->hcd; @@ -196,7 +195,7 @@ static void ehci_hcd_sh_shutdown(struct platform_device *pdev) static struct platform_driver ehci_hcd_sh_driver = { .probe = ehci_hcd_sh_probe, - .remove = __exit_p(ehci_hcd_sh_remove), + .remove = ehci_hcd_sh_remove, .shutdown = ehci_hcd_sh_shutdown, .driver = { .name = "sh_ehci", diff --git a/drivers/usb/host/ehci-spear.c b/drivers/usb/host/ehci-spear.c index 466c1bb5b96..61ecfb3d52f 100644 --- a/drivers/usb/host/ehci-spear.c +++ b/drivers/usb/host/ehci-spear.c @@ -1,5 +1,5 @@ /* -* Driver for EHCI HCD on SPEAR SOC +* Driver for EHCI HCD on SPEAr SOC * * Copyright (C) 2010 ST Micro Electronics, * Deepak Sikri <deepak.sikri@st.com> @@ -12,73 +12,32 @@ */ #include <linux/clk.h> +#include <linux/dma-mapping.h> +#include <linux/io.h> #include <linux/jiffies.h> +#include <linux/kernel.h> +#include <linux/module.h> #include <linux/of.h> #include <linux/platform_device.h> #include <linux/pm.h> +#include <linux/usb.h> +#include <linux/usb/hcd.h> -struct spear_ehci { - struct ehci_hcd ehci; - struct clk *clk; -}; - -#define to_spear_ehci(hcd) (struct spear_ehci *)hcd_to_ehci(hcd) +#include "ehci.h" -static void spear_start_ehci(struct spear_ehci *ehci) -{ - clk_prepare_enable(ehci->clk); -} +#define DRIVER_DESC "EHCI SPEAr driver" -static void spear_stop_ehci(struct spear_ehci *ehci) -{ - clk_disable_unprepare(ehci->clk); -} +static const char hcd_name[] = "SPEAr-ehci"; -static int ehci_spear_setup(struct usb_hcd *hcd) -{ - struct ehci_hcd *ehci = hcd_to_ehci(hcd); - - /* registers start at offset 0x0 */ - ehci->caps = hcd->regs; +struct spear_ehci { + struct clk *clk; +}; - return ehci_setup(hcd); -} +#define to_spear_ehci(hcd) (struct spear_ehci *)(hcd_to_ehci(hcd)->priv) -static const struct hc_driver ehci_spear_hc_driver = { - .description = hcd_name, - .product_desc = "SPEAr EHCI", - .hcd_priv_size = sizeof(struct spear_ehci), - - /* generic hardware linkage */ - .irq = ehci_irq, - .flags = HCD_MEMORY | HCD_USB2, - - /* basic lifecycle operations */ - .reset = ehci_spear_setup, - .start = ehci_run, - .stop = ehci_stop, - .shutdown = ehci_shutdown, - - /* managing i/o requests and associated device resources */ - .urb_enqueue = ehci_urb_enqueue, - .urb_dequeue = ehci_urb_dequeue, - .endpoint_disable = ehci_endpoint_disable, - .endpoint_reset = ehci_endpoint_reset, - - /* scheduling support */ - .get_frame_number = ehci_get_frame, - - /* root hub support */ - .hub_status_data = ehci_hub_status_data, - .hub_control = ehci_hub_control, - .bus_suspend = ehci_bus_suspend, - .bus_resume = ehci_bus_resume, - .relinquish_port = ehci_relinquish_port, - .port_handed_over = ehci_port_handed_over, - .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, -}; +static struct hc_driver __read_mostly ehci_spear_hc_driver; -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static int ehci_spear_drv_suspend(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); @@ -94,7 +53,7 @@ static int ehci_spear_drv_resume(struct device *dev) ehci_resume(hcd, false); return 0; } -#endif /* CONFIG_PM */ +#endif /* CONFIG_PM_SLEEP */ static SIMPLE_DEV_PM_OPS(ehci_spear_pm_ops, ehci_spear_drv_suspend, ehci_spear_drv_resume); @@ -104,7 +63,7 @@ static u64 spear_ehci_dma_mask = DMA_BIT_MASK(32); static int spear_ehci_hcd_drv_probe(struct platform_device *pdev) { struct usb_hcd *hcd ; - struct spear_ehci *ehci; + struct spear_ehci *sehci; struct resource *res; struct clk *usbh_clk; const struct hc_driver *driver = &ehci_spear_hc_driver; @@ -161,10 +120,13 @@ static int spear_ehci_hcd_drv_probe(struct platform_device *pdev) goto err_put_hcd; } - ehci = (struct spear_ehci *)hcd_to_ehci(hcd); - ehci->clk = usbh_clk; + sehci = to_spear_ehci(hcd); + sehci->clk = usbh_clk; + + /* registers start at offset 0x0 */ + hcd_to_ehci(hcd)->caps = hcd->regs; - spear_start_ehci(ehci); + clk_prepare_enable(sehci->clk); retval = usb_add_hcd(hcd, irq, IRQF_SHARED); if (retval) goto err_stop_ehci; @@ -172,7 +134,7 @@ static int spear_ehci_hcd_drv_probe(struct platform_device *pdev) return retval; err_stop_ehci: - spear_stop_ehci(ehci); + clk_disable_unprepare(sehci->clk); err_put_hcd: usb_put_hcd(hcd); fail: @@ -184,7 +146,7 @@ fail: static int spear_ehci_hcd_drv_remove(struct platform_device *pdev) { struct usb_hcd *hcd = platform_get_drvdata(pdev); - struct spear_ehci *ehci_p = to_spear_ehci(hcd); + struct spear_ehci *sehci = to_spear_ehci(hcd); if (!hcd) return 0; @@ -192,8 +154,8 @@ static int spear_ehci_hcd_drv_remove(struct platform_device *pdev) BUG(); usb_remove_hcd(hcd); - if (ehci_p->clk) - spear_stop_ehci(ehci_p); + if (sehci->clk) + clk_disable_unprepare(sehci->clk); usb_put_hcd(hcd); return 0; @@ -216,4 +178,29 @@ static struct platform_driver spear_ehci_hcd_driver = { } }; +static const struct ehci_driver_overrides spear_overrides __initdata = { + .extra_priv_size = sizeof(struct spear_ehci), +}; + +static int __init ehci_spear_init(void) +{ + if (usb_disabled()) + return -ENODEV; + + pr_info("%s: " DRIVER_DESC "\n", hcd_name); + + ehci_init_driver(&ehci_spear_hc_driver, &spear_overrides); + return platform_driver_register(&spear_ehci_hcd_driver); +} +module_init(ehci_spear_init); + +static void __exit ehci_spear_cleanup(void) +{ + platform_driver_unregister(&spear_ehci_hcd_driver); +} +module_exit(ehci_spear_cleanup); + +MODULE_DESCRIPTION(DRIVER_DESC); MODULE_ALIAS("platform:spear-ehci"); +MODULE_AUTHOR("Deepak Sikri"); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c index 568aecc7075..e3eddc31ac8 100644 --- a/drivers/usb/host/ehci-tegra.c +++ b/drivers/usb/host/ehci-tegra.c @@ -28,6 +28,7 @@ #include <linux/pm_runtime.h> #include <linux/usb/ehci_def.h> #include <linux/usb/tegra_usb_phy.h> +#include <linux/clk/tegra.h> #define TEGRA_USB_BASE 0xC5000000 #define TEGRA_USB2_BASE 0xC5004000 @@ -610,7 +611,7 @@ static const struct dev_pm_ops tegra_ehci_pm_ops = { /* Bits of PORTSC1, which will get cleared by writing 1 into them */ #define TEGRA_PORTSC1_RWC_BITS (PORT_CSC | PORT_PEC | PORT_OCC) -void tegra_ehci_set_pts(struct usb_phy *x, u8 pts_val) +static void tegra_ehci_set_pts(struct usb_phy *x, u8 pts_val) { unsigned long val; struct usb_hcd *hcd = bus_to_hcd(x->otg->host); @@ -621,9 +622,8 @@ void tegra_ehci_set_pts(struct usb_phy *x, u8 pts_val) val |= TEGRA_USB_PORTSC1_PTS(pts_val & 3); writel(val, base + TEGRA_USB_PORTSC1); } -EXPORT_SYMBOL_GPL(tegra_ehci_set_pts); -void tegra_ehci_set_phcd(struct usb_phy *x, bool enable) +static void tegra_ehci_set_phcd(struct usb_phy *x, bool enable) { unsigned long val; struct usb_hcd *hcd = bus_to_hcd(x->otg->host); @@ -636,7 +636,6 @@ void tegra_ehci_set_phcd(struct usb_phy *x, bool enable) val &= ~TEGRA_USB_PORTSC1_PHCD; writel(val, base + TEGRA_USB_PORTSC1); } -EXPORT_SYMBOL_GPL(tegra_ehci_set_phcd); static u64 tegra_ehci_dma_mask = DMA_BIT_MASK(32); @@ -691,6 +690,10 @@ static int tegra_ehci_probe(struct platform_device *pdev) if (err) goto fail_clk; + tegra_periph_reset_assert(tegra->clk); + udelay(1); + tegra_periph_reset_deassert(tegra->clk); + tegra->needs_double_reset = of_property_read_bool(pdev->dev.of_node, "nvidia,needs-double-reset"); @@ -733,7 +736,9 @@ static int tegra_ehci_probe(struct platform_device *pdev) tegra->phy = tegra_usb_phy_open(&pdev->dev, instance, hcd->regs, pdata->phy_config, - TEGRA_USB_PHY_MODE_HOST); + TEGRA_USB_PHY_MODE_HOST, + tegra_ehci_set_pts, + tegra_ehci_set_phcd); if (IS_ERR(tegra->phy)) { dev_err(&pdev->dev, "Failed to open USB phy\n"); err = -ENXIO; @@ -755,7 +760,7 @@ static int tegra_ehci_probe(struct platform_device *pdev) err = usb_phy_set_suspend(hcd->phy, 0); if (err) { dev_err(&pdev->dev, "Failed to power on the phy\n"); - goto fail; + goto fail_phy; } tegra->host_resumed = 1; @@ -765,17 +770,17 @@ static int tegra_ehci_probe(struct platform_device *pdev) if (!irq) { dev_err(&pdev->dev, "Failed to get IRQ\n"); err = -ENODEV; - goto fail; + goto fail_phy; } -#ifdef CONFIG_USB_OTG_UTILS if (pdata->operating_mode == TEGRA_USB_OTG) { tegra->transceiver = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2); - if (!IS_ERR_OR_NULL(tegra->transceiver)) + if (!IS_ERR(tegra->transceiver)) otg_set_host(tegra->transceiver->otg, &hcd->self); + } else { + tegra->transceiver = ERR_PTR(-ENODEV); } -#endif err = usb_add_hcd(hcd, irq, IRQF_SHARED); if (err) { @@ -794,10 +799,9 @@ static int tegra_ehci_probe(struct platform_device *pdev) return err; fail: -#ifdef CONFIG_USB_OTG_UTILS - if (!IS_ERR_OR_NULL(tegra->transceiver)) + if (!IS_ERR(tegra->transceiver)) otg_set_host(tegra->transceiver->otg, NULL); -#endif +fail_phy: usb_phy_shutdown(hcd->phy); fail_io: clk_disable_unprepare(tegra->clk); @@ -815,10 +819,8 @@ static int tegra_ehci_remove(struct platform_device *pdev) pm_runtime_disable(&pdev->dev); pm_runtime_put_noidle(&pdev->dev); -#ifdef CONFIG_USB_OTG_UTILS - if (!IS_ERR_OR_NULL(tegra->transceiver)) + if (!IS_ERR(tegra->transceiver)) otg_set_host(tegra->transceiver->otg, NULL); -#endif usb_phy_shutdown(hcd->phy); usb_remove_hcd(hcd); diff --git a/drivers/usb/host/ehci-timer.c b/drivers/usb/host/ehci-timer.c index c3fa1305f83..11e5b32f73e 100644 --- a/drivers/usb/host/ehci-timer.c +++ b/drivers/usb/host/ehci-timer.c @@ -113,8 +113,8 @@ static void ehci_poll_ASS(struct ehci_hcd *ehci) if (want != actual) { - /* Poll again later, but give up after about 20 ms */ - if (ehci->ASS_poll_count++ < 20) { + /* Poll again later, but give up after about 2-4 ms */ + if (ehci->ASS_poll_count++ < 2) { ehci_enable_event(ehci, EHCI_HRTIMER_POLL_ASS, true); return; } @@ -159,8 +159,8 @@ static void ehci_poll_PSS(struct ehci_hcd *ehci) if (want != actual) { - /* Poll again later, but give up after about 20 ms */ - if (ehci->PSS_poll_count++ < 20) { + /* Poll again later, but give up after about 2-4 ms */ + if (ehci->PSS_poll_count++ < 2) { ehci_enable_event(ehci, EHCI_HRTIMER_POLL_PSS, true); return; } @@ -229,18 +229,19 @@ static void ehci_handle_intr_unlinks(struct ehci_hcd *ehci) * process all the QHs on the list. */ ehci->intr_unlinking = true; - while (ehci->intr_unlink) { - struct ehci_qh *qh = ehci->intr_unlink; + while (!list_empty(&ehci->intr_unlink)) { + struct ehci_qh *qh; + qh = list_first_entry(&ehci->intr_unlink, struct ehci_qh, + unlink_node); if (!stopped && qh->unlink_cycle == ehci->intr_unlink_cycle) break; - ehci->intr_unlink = qh->unlink_next; - qh->unlink_next = NULL; + list_del(&qh->unlink_node); end_unlink_intr(ehci, qh); } /* Handle remaining entries later */ - if (ehci->intr_unlink) { + if (!list_empty(&ehci->intr_unlink)) { ehci_enable_event(ehci, EHCI_HRTIMER_UNLINK_INTR, true); ++ehci->intr_unlink_cycle; } @@ -295,8 +296,7 @@ static void end_free_itds(struct ehci_hcd *ehci) /* Handle lost (or very late) IAA interrupts */ static void ehci_iaa_watchdog(struct ehci_hcd *ehci) { - if (ehci->rh_state != EHCI_RH_RUNNING) - return; + u32 cmd, status; /* * Lost IAA irqs wedge things badly; seen first with a vt8235. @@ -304,34 +304,32 @@ static void ehci_iaa_watchdog(struct ehci_hcd *ehci) * (a) SMP races against real IAA firing and retriggering, and * (b) clean HC shutdown, when IAA watchdog was pending. */ - if (1) { - u32 cmd, status; - - /* If we get here, IAA is *REALLY* late. It's barely - * conceivable that the system is so busy that CMD_IAAD - * is still legitimately set, so let's be sure it's - * clear before we read STS_IAA. (The HC should clear - * CMD_IAAD when it sets STS_IAA.) - */ - cmd = ehci_readl(ehci, &ehci->regs->command); - - /* - * If IAA is set here it either legitimately triggered - * after the watchdog timer expired (_way_ late, so we'll - * still count it as lost) ... or a silicon erratum: - * - VIA seems to set IAA without triggering the IRQ; - * - IAAD potentially cleared without setting IAA. - */ - status = ehci_readl(ehci, &ehci->regs->status); - if ((status & STS_IAA) || !(cmd & CMD_IAAD)) { - COUNT(ehci->stats.lost_iaa); - ehci_writel(ehci, STS_IAA, &ehci->regs->status); - } + if (!ehci->iaa_in_progress || ehci->rh_state != EHCI_RH_RUNNING) + return; + + /* If we get here, IAA is *REALLY* late. It's barely + * conceivable that the system is so busy that CMD_IAAD + * is still legitimately set, so let's be sure it's + * clear before we read STS_IAA. (The HC should clear + * CMD_IAAD when it sets STS_IAA.) + */ + cmd = ehci_readl(ehci, &ehci->regs->command); - ehci_vdbg(ehci, "IAA watchdog: status %x cmd %x\n", - status, cmd); - end_unlink_async(ehci); + /* + * If IAA is set here it either legitimately triggered + * after the watchdog timer expired (_way_ late, so we'll + * still count it as lost) ... or a silicon erratum: + * - VIA seems to set IAA without triggering the IRQ; + * - IAAD potentially cleared without setting IAA. + */ + status = ehci_readl(ehci, &ehci->regs->status); + if ((status & STS_IAA) || !(cmd & CMD_IAAD)) { + COUNT(ehci->stats.lost_iaa); + ehci_writel(ehci, STS_IAA, &ehci->regs->status); } + + ehci_dbg(ehci, "IAA watchdog: status %x cmd %x\n", status, cmd); + end_unlink_async(ehci); } diff --git a/drivers/usb/host/ehci-vt8500.c b/drivers/usb/host/ehci-vt8500.c deleted file mode 100644 index 7ecf709610b..00000000000 --- a/drivers/usb/host/ehci-vt8500.c +++ /dev/null @@ -1,150 +0,0 @@ -/* - * drivers/usb/host/ehci-vt8500.c - * - * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com> - * - * Based on ehci-au1xxx.c - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/err.h> -#include <linux/of.h> -#include <linux/platform_device.h> - -static const struct hc_driver vt8500_ehci_hc_driver = { - .description = hcd_name, - .product_desc = "VT8500 EHCI", - .hcd_priv_size = sizeof(struct ehci_hcd), - - /* - * generic hardware linkage - */ - .irq = ehci_irq, - .flags = HCD_MEMORY | HCD_USB2, - - /* - * basic lifecycle operations - */ - .reset = ehci_setup, - .start = ehci_run, - .stop = ehci_stop, - .shutdown = ehci_shutdown, - - /* - * managing i/o requests and associated device resources - */ - .urb_enqueue = ehci_urb_enqueue, - .urb_dequeue = ehci_urb_dequeue, - .endpoint_disable = ehci_endpoint_disable, - .endpoint_reset = ehci_endpoint_reset, - - /* - * scheduling support - */ - .get_frame_number = ehci_get_frame, - - /* - * root hub support - */ - .hub_status_data = ehci_hub_status_data, - .hub_control = ehci_hub_control, - .bus_suspend = ehci_bus_suspend, - .bus_resume = ehci_bus_resume, - .relinquish_port = ehci_relinquish_port, - .port_handed_over = ehci_port_handed_over, - - .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, -}; - -static u64 vt8500_ehci_dma_mask = DMA_BIT_MASK(32); - -static int vt8500_ehci_drv_probe(struct platform_device *pdev) -{ - struct usb_hcd *hcd; - struct ehci_hcd *ehci; - struct resource *res; - int ret; - - if (usb_disabled()) - return -ENODEV; - - /* - * Right now device-tree probed devices don't get dma_mask set. - * Since shared usb code relies on it, set it here for now. - * Once we have dma capability bindings this can go away. - */ - if (!pdev->dev.dma_mask) - pdev->dev.dma_mask = &vt8500_ehci_dma_mask; - - if (pdev->resource[1].flags != IORESOURCE_IRQ) { - pr_debug("resource[1] is not IORESOURCE_IRQ"); - return -ENOMEM; - } - hcd = usb_create_hcd(&vt8500_ehci_hc_driver, &pdev->dev, "VT8500"); - if (!hcd) - return -ENOMEM; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - hcd->rsrc_start = res->start; - hcd->rsrc_len = resource_size(res); - - hcd->regs = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(hcd->regs)) { - ret = PTR_ERR(hcd->regs); - goto err1; - } - - ehci = hcd_to_ehci(hcd); - ehci->caps = hcd->regs; - - ret = usb_add_hcd(hcd, pdev->resource[1].start, - IRQF_SHARED); - if (ret == 0) { - platform_set_drvdata(pdev, hcd); - return ret; - } - -err1: - usb_put_hcd(hcd); - return ret; -} - -static int vt8500_ehci_drv_remove(struct platform_device *pdev) -{ - struct usb_hcd *hcd = platform_get_drvdata(pdev); - - usb_remove_hcd(hcd); - usb_put_hcd(hcd); - platform_set_drvdata(pdev, NULL); - - return 0; -} - -static const struct of_device_id vt8500_ehci_ids[] = { - { .compatible = "via,vt8500-ehci", }, - { .compatible = "wm,prizm-ehci", }, - {} -}; - -static struct platform_driver vt8500_ehci_driver = { - .probe = vt8500_ehci_drv_probe, - .remove = vt8500_ehci_drv_remove, - .shutdown = usb_hcd_platform_shutdown, - .driver = { - .name = "vt8500-ehci", - .owner = THIS_MODULE, - .of_match_table = of_match_ptr(vt8500_ehci_ids), - } -}; - -MODULE_ALIAS("platform:vt8500-ehci"); -MODULE_DEVICE_TABLE(of, vt8500_ehci_ids); diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index 36c3a821059..7c978b23520 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -121,6 +121,7 @@ struct ehci_hcd { /* one per controller */ bool scanning:1; bool need_rescan:1; bool intr_unlinking:1; + bool iaa_in_progress:1; bool async_unlinking:1; bool shutdown:1; struct ehci_qh *qh_scan_next; @@ -128,9 +129,8 @@ struct ehci_hcd { /* one per controller */ /* async schedule support */ struct ehci_qh *async; struct ehci_qh *dummy; /* For AMD quirk use */ - struct ehci_qh *async_unlink; - struct ehci_qh *async_unlink_last; - struct ehci_qh *async_iaa; + struct list_head async_unlink; + struct list_head async_idle; unsigned async_unlink_cycle; unsigned async_count; /* async activity count */ @@ -143,8 +143,7 @@ struct ehci_hcd { /* one per controller */ unsigned i_thresh; /* uframes HC might cache */ union ehci_shadow *pshadow; /* mirror hw periodic table */ - struct ehci_qh *intr_unlink; - struct ehci_qh *intr_unlink_last; + struct list_head intr_unlink; unsigned intr_unlink_cycle; unsigned now_frame; /* frame from HC hardware */ unsigned last_iso_frame; /* last frame scanned for iso */ @@ -200,6 +199,7 @@ struct ehci_hcd { /* one per controller */ unsigned use_dummy_qh:1; /* AMD Frame List table quirk*/ unsigned has_synopsys_hc_bug:1; /* Synopsys HC */ unsigned frame_index_bug:1; /* MosChip (AKA NetMos) */ + unsigned need_oc_pp_cycle:1; /* MPC834X port power */ /* required for usb32 quirk */ #define OHCI_CTRL_HCFS (3 << 6) @@ -380,11 +380,10 @@ struct ehci_qh { struct list_head qtd_list; /* sw qtd list */ struct list_head intr_node; /* list of intr QHs */ struct ehci_qtd *dummy; - struct ehci_qh *unlink_next; /* next on unlink list */ + struct list_head unlink_node; unsigned unlink_cycle; - u8 needs_rescan; /* Dequeue during giveback */ u8 qh_state; #define QH_STATE_LINKED 1 /* HC sees this */ #define QH_STATE_UNLINK 2 /* HC may still see this */ @@ -407,6 +406,9 @@ struct ehci_qh { struct usb_device *dev; /* access to TT */ unsigned is_out:1; /* bulk or intr OUT */ unsigned clearing_tt:1; /* Clear-TT-Buf in progress */ + unsigned dequeue_during_giveback:1; + unsigned exception:1; /* got a fault, or an unlink + was requested */ }; /*-------------------------------------------------------------------------*/ diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c index 974480c516f..b04e8ece4d3 100644 --- a/drivers/usb/host/isp1362-hcd.c +++ b/drivers/usb/host/isp1362-hcd.c @@ -2175,7 +2175,7 @@ static int proc_isp1362_show(struct seq_file *s, void *unused) static int proc_isp1362_open(struct inode *inode, struct file *file) { - return single_open(file, proc_isp1362_show, PDE(inode)->data); + return single_open(file, proc_isp1362_show, PDE_DATA(inode)); } static const struct file_operations proc_ops = { @@ -2192,14 +2192,11 @@ static void create_debug_file(struct isp1362_hcd *isp1362_hcd) { struct proc_dir_entry *pde; - pde = create_proc_entry(proc_filename, 0, NULL); + pde = proc_create_data(proc_filename, 0, NULL, &proc_ops, isp1362_hcd); if (pde == NULL) { pr_warning("%s: Failed to create debug file '%s'\n", __func__, proc_filename); return; } - - pde->proc_fops = &proc_ops; - pde->data = isp1362_hcd; isp1362_hcd->pde = pde; } diff --git a/drivers/usb/host/ohci-exynos.c b/drivers/usb/host/ohci-exynos.c index e3b7e85120e..07592c00af2 100644 --- a/drivers/usb/host/ohci-exynos.c +++ b/drivers/usb/host/ohci-exynos.c @@ -14,10 +14,9 @@ #include <linux/clk.h> #include <linux/of.h> #include <linux/platform_device.h> -#include <linux/platform_data/usb-exynos.h> +#include <linux/platform_data/usb-ohci-exynos.h> #include <linux/usb/phy.h> #include <linux/usb/samsung_usb_phy.h> -#include <plat/usb-phy.h> struct exynos_ohci_hcd { struct device *dev; @@ -34,7 +33,7 @@ static void exynos_ohci_phy_enable(struct exynos_ohci_hcd *exynos_ohci) if (exynos_ohci->phy) usb_phy_init(exynos_ohci->phy); - else if (exynos_ohci->pdata->phy_init) + else if (exynos_ohci->pdata && exynos_ohci->pdata->phy_init) exynos_ohci->pdata->phy_init(pdev, USB_PHY_TYPE_HOST); } @@ -44,7 +43,7 @@ static void exynos_ohci_phy_disable(struct exynos_ohci_hcd *exynos_ohci) if (exynos_ohci->phy) usb_phy_shutdown(exynos_ohci->phy); - else if (exynos_ohci->pdata->phy_exit) + else if (exynos_ohci->pdata && exynos_ohci->pdata->phy_exit) exynos_ohci->pdata->phy_exit(pdev, USB_PHY_TYPE_HOST); } @@ -127,8 +126,12 @@ static int exynos_ohci_probe(struct platform_device *pdev) if (!exynos_ohci) return -ENOMEM; + if (of_device_is_compatible(pdev->dev.of_node, + "samsung,exynos5440-ohci")) + goto skip_phy; + phy = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2); - if (IS_ERR_OR_NULL(phy)) { + if (IS_ERR(phy)) { /* Fallback to pdata */ if (!pdata) { dev_warn(&pdev->dev, "no platform data or transceiver defined\n"); @@ -141,6 +144,8 @@ static int exynos_ohci_probe(struct platform_device *pdev) exynos_ohci->otg = phy->otg; } +skip_phy: + exynos_ohci->dev = &pdev->dev; hcd = usb_create_hcd(&exynos_ohci_hc_driver, &pdev->dev, @@ -311,6 +316,7 @@ static const struct dev_pm_ops exynos_ohci_pm_ops = { #ifdef CONFIG_OF static const struct of_device_id exynos_ohci_match[] = { { .compatible = "samsung,exynos4210-ohci" }, + { .compatible = "samsung,exynos5440-ohci" }, {}, }; MODULE_DEVICE_TABLE(of, exynos_ohci_match); diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 180a2b01db5..9e6de9586ae 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -1102,12 +1102,12 @@ MODULE_LICENSE ("GPL"); #if defined(CONFIG_ARCH_S3C24XX) || defined(CONFIG_ARCH_S3C64XX) #include "ohci-s3c2410.c" -#define PLATFORM_DRIVER ohci_hcd_s3c2410_driver +#define S3C2410_PLATFORM_DRIVER ohci_hcd_s3c2410_driver #endif #ifdef CONFIG_USB_OHCI_EXYNOS #include "ohci-exynos.c" -#define PLATFORM_DRIVER exynos_ohci_driver +#define EXYNOS_PLATFORM_DRIVER exynos_ohci_driver #endif #ifdef CONFIG_USB_OHCI_HCD_OMAP1 @@ -1127,25 +1127,24 @@ MODULE_LICENSE ("GPL"); #ifdef CONFIG_ARCH_EP93XX #include "ohci-ep93xx.c" -#define PLATFORM_DRIVER ohci_hcd_ep93xx_driver +#define EP93XX_PLATFORM_DRIVER ohci_hcd_ep93xx_driver #endif #ifdef CONFIG_ARCH_AT91 #include "ohci-at91.c" -#define PLATFORM_DRIVER ohci_hcd_at91_driver +#define AT91_PLATFORM_DRIVER ohci_hcd_at91_driver #endif #ifdef CONFIG_ARCH_LPC32XX #include "ohci-nxp.c" -#define PLATFORM_DRIVER usb_hcd_nxp_driver +#define NXP_PLATFORM_DRIVER usb_hcd_nxp_driver #endif #ifdef CONFIG_ARCH_DAVINCI_DA8XX #include "ohci-da8xx.c" -#define PLATFORM_DRIVER ohci_hcd_da8xx_driver +#define DAVINCI_PLATFORM_DRIVER ohci_hcd_da8xx_driver #endif - #ifdef CONFIG_USB_OHCI_HCD_PPC_OF #include "ohci-ppc-of.c" #define OF_PLATFORM_DRIVER ohci_hcd_ppc_of_driver @@ -1153,7 +1152,7 @@ MODULE_LICENSE ("GPL"); #ifdef CONFIG_PLAT_SPEAR #include "ohci-spear.c" -#define PLATFORM_DRIVER spear_ohci_hcd_driver +#define SPEAR_PLATFORM_DRIVER spear_ohci_hcd_driver #endif #ifdef CONFIG_PPC_PS3 @@ -1199,7 +1198,14 @@ MODULE_LICENSE ("GPL"); !defined(SA1111_DRIVER) && \ !defined(PS3_SYSTEM_BUS_DRIVER) && \ !defined(SM501_OHCI_DRIVER) && \ - !defined(TMIO_OHCI_DRIVER) + !defined(TMIO_OHCI_DRIVER) && \ + !defined(S3C2410_PLATFORM_DRIVER) && \ + !defined(EXYNOS_PLATFORM_DRIVER) && \ + !defined(EP93XX_PLATFORM_DRIVER) && \ + !defined(AT91_PLATFORM_DRIVER) && \ + !defined(NXP_PLATFORM_DRIVER) && \ + !defined(DAVINCI_PLATFORM_DRIVER) && \ + !defined(SPEAR_PLATFORM_DRIVER) #error "missing bus glue for ohci-hcd" #endif @@ -1277,9 +1283,79 @@ static int __init ohci_hcd_mod_init(void) goto error_tmio; #endif +#ifdef S3C2410_PLATFORM_DRIVER + retval = platform_driver_register(&S3C2410_PLATFORM_DRIVER); + if (retval < 0) + goto error_s3c2410; +#endif + +#ifdef EXYNOS_PLATFORM_DRIVER + retval = platform_driver_register(&EXYNOS_PLATFORM_DRIVER); + if (retval < 0) + goto error_exynos; +#endif + +#ifdef EP93XX_PLATFORM_DRIVER + retval = platform_driver_register(&EP93XX_PLATFORM_DRIVER); + if (retval < 0) + goto error_ep93xx; +#endif + +#ifdef AT91_PLATFORM_DRIVER + retval = platform_driver_register(&AT91_PLATFORM_DRIVER); + if (retval < 0) + goto error_at91; +#endif + +#ifdef NXP_PLATFORM_DRIVER + retval = platform_driver_register(&NXP_PLATFORM_DRIVER); + if (retval < 0) + goto error_nxp; +#endif + +#ifdef DAVINCI_PLATFORM_DRIVER + retval = platform_driver_register(&DAVINCI_PLATFORM_DRIVER); + if (retval < 0) + goto error_davinci; +#endif + +#ifdef SPEAR_PLATFORM_DRIVER + retval = platform_driver_register(&SPEAR_PLATFORM_DRIVER); + if (retval < 0) + goto error_spear; +#endif + return retval; /* Error path */ +#ifdef SPEAR_PLATFORM_DRIVER + platform_driver_unregister(&SPEAR_PLATFORM_DRIVER); + error_spear: +#endif +#ifdef DAVINCI_PLATFORM_DRIVER + platform_driver_unregister(&DAVINCI_PLATFORM_DRIVER); + error_davinci: +#endif +#ifdef NXP_PLATFORM_DRIVER + platform_driver_unregister(&NXP_PLATFORM_DRIVER); + error_nxp: +#endif +#ifdef AT91_PLATFORM_DRIVER + platform_driver_unregister(&AT91_PLATFORM_DRIVER); + error_at91: +#endif +#ifdef EP93XX_PLATFORM_DRIVER + platform_driver_unregister(&EP93XX_PLATFORM_DRIVER); + error_ep93xx: +#endif +#ifdef EXYNOS_PLATFORM_DRIVER + platform_driver_unregister(&EXYNOS_PLATFORM_DRIVER); + error_exynos: +#endif +#ifdef S3C2410_PLATFORM_DRIVER + platform_driver_unregister(&S3C2410_PLATFORM_DRIVER); + error_s3c2410: +#endif #ifdef TMIO_OHCI_DRIVER platform_driver_unregister(&TMIO_OHCI_DRIVER); error_tmio: @@ -1300,17 +1376,17 @@ static int __init ohci_hcd_mod_init(void) platform_driver_unregister(&OF_PLATFORM_DRIVER); error_of_platform: #endif -#ifdef PLATFORM_DRIVER - platform_driver_unregister(&PLATFORM_DRIVER); - error_platform: +#ifdef OMAP3_PLATFORM_DRIVER + platform_driver_unregister(&OMAP3_PLATFORM_DRIVER); + error_omap3_platform: #endif #ifdef OMAP1_PLATFORM_DRIVER platform_driver_unregister(&OMAP1_PLATFORM_DRIVER); error_omap1_platform: #endif -#ifdef OMAP3_PLATFORM_DRIVER - platform_driver_unregister(&OMAP3_PLATFORM_DRIVER); - error_omap3_platform: +#ifdef PLATFORM_DRIVER + platform_driver_unregister(&PLATFORM_DRIVER); + error_platform: #endif #ifdef PS3_SYSTEM_BUS_DRIVER ps3_ohci_driver_unregister(&PS3_SYSTEM_BUS_DRIVER); @@ -1329,6 +1405,27 @@ module_init(ohci_hcd_mod_init); static void __exit ohci_hcd_mod_exit(void) { +#ifdef SPEAR_PLATFORM_DRIVER + platform_driver_unregister(&SPEAR_PLATFORM_DRIVER); +#endif +#ifdef DAVINCI_PLATFORM_DRIVER + platform_driver_unregister(&DAVINCI_PLATFORM_DRIVER); +#endif +#ifdef NXP_PLATFORM_DRIVER + platform_driver_unregister(&NXP_PLATFORM_DRIVER); +#endif +#ifdef AT91_PLATFORM_DRIVER + platform_driver_unregister(&AT91_PLATFORM_DRIVER); +#endif +#ifdef EP93XX_PLATFORM_DRIVER + platform_driver_unregister(&EP93XX_PLATFORM_DRIVER); +#endif +#ifdef EXYNOS_PLATFORM_DRIVER + platform_driver_unregister(&EXYNOS_PLATFORM_DRIVER); +#endif +#ifdef S3C2410_PLATFORM_DRIVER + platform_driver_unregister(&S3C2410_PLATFORM_DRIVER); +#endif #ifdef TMIO_OHCI_DRIVER platform_driver_unregister(&TMIO_OHCI_DRIVER); #endif @@ -1344,12 +1441,15 @@ static void __exit ohci_hcd_mod_exit(void) #ifdef OF_PLATFORM_DRIVER platform_driver_unregister(&OF_PLATFORM_DRIVER); #endif -#ifdef PLATFORM_DRIVER - platform_driver_unregister(&PLATFORM_DRIVER); -#endif #ifdef OMAP3_PLATFORM_DRIVER platform_driver_unregister(&OMAP3_PLATFORM_DRIVER); #endif +#ifdef OMAP1_PLATFORM_DRIVER + platform_driver_unregister(&OMAP1_PLATFORM_DRIVER); +#endif +#ifdef PLATFORM_DRIVER + platform_driver_unregister(&PLATFORM_DRIVER); +#endif #ifdef PS3_SYSTEM_BUS_DRIVER ps3_ohci_driver_unregister(&PS3_SYSTEM_BUS_DRIVER); #endif diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c index db09dae7b55..60ff4220e8b 100644 --- a/drivers/usb/host/ohci-hub.c +++ b/drivers/usb/host/ohci-hub.c @@ -580,14 +580,8 @@ static int ohci_start_port_reset (struct usb_hcd *hcd, unsigned port) /* See usb 7.1.7.5: root hubs must issue at least 50 msec reset signaling, * not necessarily continuous ... to guard against resume signaling. - * The short timeout is safe for non-root hubs, and is backward-compatible - * with earlier Linux hosts. */ -#ifdef CONFIG_USB_SUSPEND #define PORT_RESET_MSEC 50 -#else -#define PORT_RESET_MSEC 10 -#endif /* this timer value might be vendor-specific ... */ #define PORT_RESET_HW_MSEC 10 diff --git a/drivers/usb/host/ohci-omap3.c b/drivers/usb/host/ohci-omap3.c index eb35d963023..ddfc31427bc 100644 --- a/drivers/usb/host/ohci-omap3.c +++ b/drivers/usb/host/ohci-omap3.c @@ -31,6 +31,8 @@ #include <linux/platform_device.h> #include <linux/pm_runtime.h> +#include <linux/of.h> +#include <linux/dma-mapping.h> /*-------------------------------------------------------------------------*/ @@ -112,6 +114,8 @@ static const struct hc_driver ohci_omap3_hc_driver = { /*-------------------------------------------------------------------------*/ +static u64 omap_ohci_dma_mask = DMA_BIT_MASK(32); + /* * configure so an HC device and id are always provided * always called with process context; sleeping is OK @@ -141,14 +145,13 @@ static int ohci_hcd_omap3_probe(struct platform_device *pdev) return -ENODEV; } - irq = platform_get_irq_byname(pdev, "ohci-irq"); + irq = platform_get_irq(pdev, 0); if (irq < 0) { dev_err(dev, "OHCI irq failed\n"); return -ENODEV; } - res = platform_get_resource_byname(pdev, - IORESOURCE_MEM, "ohci"); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { dev_err(dev, "UHH OHCI get resource failed\n"); return -ENOMEM; @@ -160,6 +163,13 @@ static int ohci_hcd_omap3_probe(struct platform_device *pdev) return -ENOMEM; } + /* + * Right now device-tree probed devices don't get dma_mask set. + * Since shared usb code relies on it, set it here for now. + * Once we have dma capability bindings this can go away. + */ + if (!pdev->dev.dma_mask) + pdev->dev.dma_mask = &omap_ohci_dma_mask; hcd = usb_create_hcd(&ohci_omap3_hc_driver, dev, dev_name(dev)); @@ -229,12 +239,20 @@ static void ohci_hcd_omap3_shutdown(struct platform_device *pdev) hcd->driver->shutdown(hcd); } +static const struct of_device_id omap_ohci_dt_ids[] = { + { .compatible = "ti,ohci-omap3" }, + { } +}; + +MODULE_DEVICE_TABLE(of, omap_ohci_dt_ids); + static struct platform_driver ohci_hcd_omap3_driver = { .probe = ohci_hcd_omap3_probe, .remove = ohci_hcd_omap3_remove, .shutdown = ohci_hcd_omap3_shutdown, .driver = { .name = "ohci-omap3", + .of_match_table = of_match_ptr(omap_ohci_dt_ids), }, }; diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c index d62f0404baa..ad4483efb6d 100644 --- a/drivers/usb/host/sl811-hcd.c +++ b/drivers/usb/host/sl811-hcd.c @@ -1494,7 +1494,7 @@ static int proc_sl811h_show(struct seq_file *s, void *unused) static int proc_sl811h_open(struct inode *inode, struct file *file) { - return single_open(file, proc_sl811h_show, PDE(inode)->data); + return single_open(file, proc_sl811h_show, PDE_DATA(inode)); } static const struct file_operations proc_ops = { @@ -1755,7 +1755,7 @@ sl811h_probe(struct platform_device *dev) /* for this device there's no useful distinction between the controller * and its root hub, except that the root hub only gets direct PM calls - * when CONFIG_USB_SUSPEND is enabled. + * when CONFIG_PM_RUNTIME is enabled. */ static int diff --git a/drivers/usb/host/sl811_cs.c b/drivers/usb/host/sl811_cs.c index 3b6f50eaec9..469564e57a5 100644 --- a/drivers/usb/host/sl811_cs.c +++ b/drivers/usb/host/sl811_cs.c @@ -200,17 +200,4 @@ static struct pcmcia_driver sl811_cs_driver = { .remove = sl811_cs_detach, .id_table = sl811_ids, }; - -/*====================================================================*/ - -static int __init init_sl811_cs(void) -{ - return pcmcia_register_driver(&sl811_cs_driver); -} -module_init(init_sl811_cs); - -static void __exit exit_sl811_cs(void) -{ - pcmcia_unregister_driver(&sl811_cs_driver); -} -module_exit(exit_sl811_cs); +module_pcmcia_driver(sl811_cs_driver); diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c index 5efdffe3236..5c124bf5d01 100644 --- a/drivers/usb/host/u132-hcd.c +++ b/drivers/usb/host/u132-hcd.c @@ -3141,10 +3141,11 @@ static int u132_probe(struct platform_device *pdev) #ifdef CONFIG_PM -/* for this device there's no useful distinction between the controller -* and its root hub, except that the root hub only gets direct PM calls -* when CONFIG_USB_SUSPEND is enabled. -*/ +/* + * for this device there's no useful distinction between the controller + * and its root hub, except that the root hub only gets direct PM calls + * when CONFIG_PM_RUNTIME is enabled. + */ static int u132_suspend(struct platform_device *pdev, pm_message_t state) { struct usb_hcd *hcd = platform_get_drvdata(pdev); diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 68914429482..187a3ec1069 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -1075,7 +1075,7 @@ int xhci_bus_suspend(struct usb_hcd *hcd) set_bit(port_index, &bus_state->bus_suspended); } /* USB core sets remote wake mask for USB 3.0 hubs, - * including the USB 3.0 roothub, but only if CONFIG_USB_SUSPEND + * including the USB 3.0 roothub, but only if CONFIG_PM_RUNTIME * is enabled, so also enable remote wake here. */ if (hcd->self.root_hub->do_remote_wakeup) { diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 6dc238c592b..965b539bc47 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -51,7 +51,7 @@ static struct xhci_segment *xhci_segment_alloc(struct xhci_hcd *xhci, return NULL; } - memset(seg->trbs, 0, SEGMENT_SIZE); + memset(seg->trbs, 0, TRB_SEGMENT_SIZE); /* If the cycle state is 0, set the cycle bit to 1 for all the TRBs */ if (cycle_state == 0) { for (i = 0; i < TRBS_PER_SEGMENT; i++) @@ -467,7 +467,7 @@ struct xhci_ring *xhci_dma_to_transfer_ring( { if (ep->ep_state & EP_HAS_STREAMS) return radix_tree_lookup(&ep->stream_info->trb_address_map, - address >> SEGMENT_SHIFT); + address >> TRB_SEGMENT_SHIFT); return ep->ring; } @@ -478,7 +478,7 @@ static struct xhci_ring *dma_to_stream_ring( u64 address) { return radix_tree_lookup(&stream_info->trb_address_map, - address >> SEGMENT_SHIFT); + address >> TRB_SEGMENT_SHIFT); } #endif /* CONFIG_USB_XHCI_HCD_DEBUGGING */ @@ -514,7 +514,7 @@ static int xhci_test_radix_tree(struct xhci_hcd *xhci, cur_ring = stream_info->stream_rings[cur_stream]; for (addr = cur_ring->first_seg->dma; - addr < cur_ring->first_seg->dma + SEGMENT_SIZE; + addr < cur_ring->first_seg->dma + TRB_SEGMENT_SIZE; addr += trb_size) { mapped_ring = dma_to_stream_ring(stream_info, addr); if (cur_ring != mapped_ring) { @@ -662,7 +662,7 @@ struct xhci_stream_info *xhci_alloc_stream_info(struct xhci_hcd *xhci, cur_stream, (unsigned long long) addr); key = (unsigned long) - (cur_ring->first_seg->dma >> SEGMENT_SHIFT); + (cur_ring->first_seg->dma >> TRB_SEGMENT_SHIFT); ret = radix_tree_insert(&stream_info->trb_address_map, key, cur_ring); if (ret) { @@ -693,7 +693,7 @@ cleanup_rings: if (cur_ring) { addr = cur_ring->first_seg->dma; radix_tree_delete(&stream_info->trb_address_map, - addr >> SEGMENT_SHIFT); + addr >> TRB_SEGMENT_SHIFT); xhci_ring_free(xhci, cur_ring); stream_info->stream_rings[cur_stream] = NULL; } @@ -764,7 +764,7 @@ void xhci_free_stream_info(struct xhci_hcd *xhci, if (cur_ring) { addr = cur_ring->first_seg->dma; radix_tree_delete(&stream_info->trb_address_map, - addr >> SEGMENT_SHIFT); + addr >> TRB_SEGMENT_SHIFT); xhci_ring_free(xhci, cur_ring); stream_info->stream_rings[cur_stream] = NULL; } @@ -2305,7 +2305,7 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) * so we pick the greater alignment need. */ xhci->segment_pool = dma_pool_create("xHCI ring segments", dev, - SEGMENT_SIZE, 64, xhci->page_size); + TRB_SEGMENT_SIZE, 64, xhci->page_size); /* See Table 46 and Note on Figure 55 */ xhci->device_pool = dma_pool_create("xHCI input/output contexts", dev, diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 53b8f89a0b1..b4aa79d154b 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -417,9 +417,9 @@ static void compliance_mode_recovery(unsigned long arg) * Compliance Mode Detected. Letting USB Core * handle the Warm Reset */ - xhci_dbg(xhci, "Compliance Mode Detected->Port %d!\n", + xhci_dbg(xhci, "Compliance mode detected->port %d\n", i + 1); - xhci_dbg(xhci, "Attempting Recovery routine!\n"); + xhci_dbg(xhci, "Attempting compliance mode recovery\n"); hcd = xhci->shared_hcd; if (hcd->state == HC_STATE_SUSPENDED) @@ -457,7 +457,7 @@ static void compliance_mode_recovery_timer_init(struct xhci_hcd *xhci) set_timer_slack(&xhci->comp_mode_recovery_timer, msecs_to_jiffies(COMP_MODE_RCVRY_MSECS)); add_timer(&xhci->comp_mode_recovery_timer); - xhci_dbg(xhci, "Compliance Mode Recovery Timer Initialized.\n"); + xhci_dbg(xhci, "Compliance mode recovery timer initialized\n"); } /* @@ -733,8 +733,11 @@ void xhci_stop(struct usb_hcd *hcd) /* Deleting Compliance Mode Recovery Timer */ if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) && - (!(xhci_all_ports_seen_u0(xhci)))) + (!(xhci_all_ports_seen_u0(xhci)))) { del_timer_sync(&xhci->comp_mode_recovery_timer); + xhci_dbg(xhci, "%s: compliance mode recovery timer deleted\n", + __func__); + } if (xhci->quirks & XHCI_AMD_PLL_FIX) usb_amd_dev_put(); @@ -930,7 +933,8 @@ int xhci_suspend(struct xhci_hcd *xhci) if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) && (!(xhci_all_ports_seen_u0(xhci)))) { del_timer_sync(&xhci->comp_mode_recovery_timer); - xhci_dbg(xhci, "Compliance Mode Recovery Timer Deleted!\n"); + xhci_dbg(xhci, "%s: compliance mode recovery timer deleted\n", + __func__); } /* step 5: remove core well power */ @@ -3801,7 +3805,7 @@ int xhci_find_raw_port_number(struct usb_hcd *hcd, int port1) return raw_port; } -#ifdef CONFIG_USB_SUSPEND +#ifdef CONFIG_PM_RUNTIME /* BESL to HIRD Encoding array for USB2 LPM */ static int xhci_besl_encoding[16] = {125, 150, 200, 300, 400, 500, 1000, 2000, @@ -4051,7 +4055,7 @@ int xhci_update_device(struct usb_hcd *hcd, struct usb_device *udev) return 0; } -#endif /* CONFIG_USB_SUSPEND */ +#endif /* CONFIG_PM_RUNTIME */ /*---------------------- USB 3.0 Link PM functions ------------------------*/ diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 63582719e0f..29c978e3713 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1238,8 +1238,8 @@ union xhci_trb { #define TRBS_PER_SEGMENT 64 /* Allow two commands + a link TRB, along with any reserved command TRBs */ #define MAX_RSVD_CMD_TRBS (TRBS_PER_SEGMENT - 3) -#define SEGMENT_SIZE (TRBS_PER_SEGMENT*16) -#define SEGMENT_SHIFT (__ffs(SEGMENT_SIZE)) +#define TRB_SEGMENT_SIZE (TRBS_PER_SEGMENT*16) +#define TRB_SEGMENT_SHIFT (ilog2(TRB_SEGMENT_SIZE)) /* TRB buffer pointers can't cross 64KB boundaries */ #define TRB_MAX_BUFF_SHIFT 16 #define TRB_MAX_BUFF_SIZE (1 << TRB_MAX_BUFF_SHIFT) |