summaryrefslogtreecommitdiffstats
path: root/drivers/usb/host
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/host')
-rw-r--r--drivers/usb/host/ehci-mxc.c15
-rw-r--r--drivers/usb/host/isp1362-hcd.c15
-rw-r--r--drivers/usb/host/ohci-pxa27x.c2
-rw-r--r--drivers/usb/host/r8a66597-hcd.c2
-rw-r--r--drivers/usb/host/xhci-mem.c26
-rw-r--r--drivers/usb/host/xhci-ring.c73
-rw-r--r--drivers/usb/host/xhci.c2
-rw-r--r--drivers/usb/host/xhci.h2
8 files changed, 104 insertions, 33 deletions
diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c
index 544ccfd7056..a8ad8ac120a 100644
--- a/drivers/usb/host/ehci-mxc.c
+++ b/drivers/usb/host/ehci-mxc.c
@@ -182,7 +182,7 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev)
}
clk_enable(priv->usbclk);
- if (!cpu_is_mx35()) {
+ if (!cpu_is_mx35() && !cpu_is_mx25()) {
priv->ahbclk = clk_get(dev, "usb_ahb");
if (IS_ERR(priv->ahbclk)) {
ret = PTR_ERR(priv->ahbclk);
@@ -207,10 +207,17 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev)
/* Initialize the transceiver */
if (pdata->otg) {
pdata->otg->io_priv = hcd->regs + ULPI_VIEWPORT_OFFSET;
- if (otg_init(pdata->otg) != 0)
- dev_err(dev, "unable to init transceiver\n");
- else if (otg_set_vbus(pdata->otg, 1) != 0)
+ ret = otg_init(pdata->otg);
+ if (ret) {
+ dev_err(dev, "unable to init transceiver, probably missing\n");
+ ret = -ENODEV;
+ goto err_add;
+ }
+ ret = otg_set_vbus(pdata->otg, 1);
+ if (ret) {
dev_err(dev, "unable to enable vbus on transceiver\n");
+ goto err_add;
+ }
}
priv->hcd = hcd;
diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c
index 20a0dfe0fe3..0587ad4ce5c 100644
--- a/drivers/usb/host/isp1362-hcd.c
+++ b/drivers/usb/host/isp1362-hcd.c
@@ -2224,12 +2224,9 @@ static void remove_debug_file(struct isp1362_hcd *isp1362_hcd)
/*-------------------------------------------------------------------------*/
-static void isp1362_sw_reset(struct isp1362_hcd *isp1362_hcd)
+static void __isp1362_sw_reset(struct isp1362_hcd *isp1362_hcd)
{
int tmp = 20;
- unsigned long flags;
-
- spin_lock_irqsave(&isp1362_hcd->lock, flags);
isp1362_write_reg16(isp1362_hcd, HCSWRES, HCSWRES_MAGIC);
isp1362_write_reg32(isp1362_hcd, HCCMDSTAT, OHCI_HCR);
@@ -2240,6 +2237,14 @@ static void isp1362_sw_reset(struct isp1362_hcd *isp1362_hcd)
}
if (!tmp)
pr_err("Software reset timeout\n");
+}
+
+static void isp1362_sw_reset(struct isp1362_hcd *isp1362_hcd)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&isp1362_hcd->lock, flags);
+ __isp1362_sw_reset(isp1362_hcd);
spin_unlock_irqrestore(&isp1362_hcd->lock, flags);
}
@@ -2418,7 +2423,7 @@ static void isp1362_hc_stop(struct usb_hcd *hcd)
if (isp1362_hcd->board && isp1362_hcd->board->reset)
isp1362_hcd->board->reset(hcd->self.controller, 1);
else
- isp1362_sw_reset(isp1362_hcd);
+ __isp1362_sw_reset(isp1362_hcd);
if (isp1362_hcd->board && isp1362_hcd->board->clock)
isp1362_hcd->board->clock(hcd->self.controller, 0);
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index a18debdd79b..41816389477 100644
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -203,7 +203,7 @@ static inline void pxa27x_reset_hc(struct pxa27x_ohci *ohci)
__raw_writel(uhchr & ~UHCHR_FHR, ohci->mmio_base + UHCHR);
}
-#ifdef CONFIG_CPU_PXA27x
+#ifdef CONFIG_PXA27x
extern void pxa27x_clear_otgph(void);
#else
#define pxa27x_clear_otgph() do {} while (0)
diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index 1a2bb4ce638..77be3c24a42 100644
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -1065,7 +1065,7 @@ static void r8a66597_usb_connect(struct r8a66597 *r8a66597, int port)
else if (speed == LSMODE)
rh->port |= USB_PORT_STAT_LOW_SPEED;
- rh->port &= USB_PORT_STAT_RESET;
+ rh->port &= ~USB_PORT_STAT_RESET;
rh->port |= USB_PORT_STAT_ENABLE;
}
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index fd9e03afd91..2eb658d2639 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -835,6 +835,27 @@ fail:
return 0;
}
+void xhci_copy_ep0_dequeue_into_input_ctx(struct xhci_hcd *xhci,
+ struct usb_device *udev)
+{
+ struct xhci_virt_device *virt_dev;
+ struct xhci_ep_ctx *ep0_ctx;
+ struct xhci_ring *ep_ring;
+
+ virt_dev = xhci->devs[udev->slot_id];
+ ep0_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, 0);
+ ep_ring = virt_dev->eps[0].ring;
+ /*
+ * FIXME we don't keep track of the dequeue pointer very well after a
+ * Set TR dequeue pointer, so we're setting the dequeue pointer of the
+ * host to our enqueue pointer. This should only be called after a
+ * configured device has reset, so all control transfers should have
+ * been completed or cancelled before the reset.
+ */
+ ep0_ctx->deq = xhci_trb_virt_to_dma(ep_ring->enq_seg, ep_ring->enqueue);
+ ep0_ctx->deq |= ep_ring->cycle_state;
+}
+
/* Setup an xHCI virtual device for a Set Address command */
int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *udev)
{
@@ -1002,7 +1023,7 @@ static inline unsigned int xhci_get_endpoint_interval(struct usb_device *udev,
return EP_INTERVAL(interval);
}
-/* The "Mult" field in the endpoint context is only set for SuperSpeed devices.
+/* The "Mult" field in the endpoint context is only set for SuperSpeed isoc eps.
* High speed endpoint descriptors can define "the number of additional
* transaction opportunities per microframe", but that goes in the Max Burst
* endpoint context field.
@@ -1010,7 +1031,8 @@ static inline unsigned int xhci_get_endpoint_interval(struct usb_device *udev,
static inline u32 xhci_get_endpoint_mult(struct usb_device *udev,
struct usb_host_endpoint *ep)
{
- if (udev->speed != USB_SPEED_SUPER)
+ if (udev->speed != USB_SPEED_SUPER ||
+ !usb_endpoint_xfer_isoc(&ep->desc))
return 0;
return ep->ss_ep_comp.bmAttributes;
}
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 9012098add6..bfc99a93945 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -182,8 +182,12 @@ static void inc_deq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer
* set, but other sections talk about dealing with the chain bit set. This was
* fixed in the 0.96 specification errata, but we have to assume that all 0.95
* xHCI hardware can't handle the chain bit being cleared on a link TRB.
+ *
+ * @more_trbs_coming: Will you enqueue more TRBs before calling
+ * prepare_transfer()?
*/
-static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer)
+static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring,
+ bool consumer, bool more_trbs_coming)
{
u32 chain;
union xhci_trb *next;
@@ -199,15 +203,28 @@ static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer
while (last_trb(xhci, ring, ring->enq_seg, next)) {
if (!consumer) {
if (ring != xhci->event_ring) {
- if (chain) {
- next->link.control |= TRB_CHAIN;
-
- /* Give this link TRB to the hardware */
- wmb();
- next->link.control ^= TRB_CYCLE;
- } else {
+ /*
+ * If the caller doesn't plan on enqueueing more
+ * TDs before ringing the doorbell, then we
+ * don't want to give the link TRB to the
+ * hardware just yet. We'll give the link TRB
+ * back in prepare_ring() just before we enqueue
+ * the TD at the top of the ring.
+ */
+ if (!chain && !more_trbs_coming)
break;
+
+ /* If we're not dealing with 0.95 hardware,
+ * carry over the chain bit of the previous TRB
+ * (which may mean the chain bit is cleared).
+ */
+ if (!xhci_link_trb_quirk(xhci)) {
+ next->link.control &= ~TRB_CHAIN;
+ next->link.control |= chain;
}
+ /* Give this link TRB to the hardware */
+ wmb();
+ next->link.control ^= TRB_CYCLE;
}
/* Toggle the cycle bit after the last ring segment. */
if (last_trb_on_last_seg(xhci, ring, ring->enq_seg, next)) {
@@ -1707,9 +1724,12 @@ void xhci_handle_event(struct xhci_hcd *xhci)
/*
* Generic function for queueing a TRB on a ring.
* The caller must have checked to make sure there's room on the ring.
+ *
+ * @more_trbs_coming: Will you enqueue more TRBs before calling
+ * prepare_transfer()?
*/
static void queue_trb(struct xhci_hcd *xhci, struct xhci_ring *ring,
- bool consumer,
+ bool consumer, bool more_trbs_coming,
u32 field1, u32 field2, u32 field3, u32 field4)
{
struct xhci_generic_trb *trb;
@@ -1719,7 +1739,7 @@ static void queue_trb(struct xhci_hcd *xhci, struct xhci_ring *ring,
trb->field[1] = field2;
trb->field[2] = field3;
trb->field[3] = field4;
- inc_enq(xhci, ring, consumer);
+ inc_enq(xhci, ring, consumer, more_trbs_coming);
}
/*
@@ -1988,6 +2008,7 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
int trb_buff_len, this_sg_len, running_total;
bool first_trb;
u64 addr;
+ bool more_trbs_coming;
struct xhci_generic_trb *start_trb;
int start_cycle;
@@ -2073,7 +2094,11 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
length_field = TRB_LEN(trb_buff_len) |
remainder |
TRB_INTR_TARGET(0);
- queue_trb(xhci, ep_ring, false,
+ if (num_trbs > 1)
+ more_trbs_coming = true;
+ else
+ more_trbs_coming = false;
+ queue_trb(xhci, ep_ring, false, more_trbs_coming,
lower_32_bits(addr),
upper_32_bits(addr),
length_field,
@@ -2124,6 +2149,7 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
int num_trbs;
struct xhci_generic_trb *start_trb;
bool first_trb;
+ bool more_trbs_coming;
int start_cycle;
u32 field, length_field;
@@ -2212,7 +2238,11 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
length_field = TRB_LEN(trb_buff_len) |
remainder |
TRB_INTR_TARGET(0);
- queue_trb(xhci, ep_ring, false,
+ if (num_trbs > 1)
+ more_trbs_coming = true;
+ else
+ more_trbs_coming = false;
+ queue_trb(xhci, ep_ring, false, more_trbs_coming,
lower_32_bits(addr),
upper_32_bits(addr),
length_field,
@@ -2291,7 +2321,7 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
/* Queue setup TRB - see section 6.4.1.2.1 */
/* FIXME better way to translate setup_packet into two u32 fields? */
setup = (struct usb_ctrlrequest *) urb->setup_packet;
- queue_trb(xhci, ep_ring, false,
+ queue_trb(xhci, ep_ring, false, true,
/* FIXME endianness is probably going to bite my ass here. */
setup->bRequestType | setup->bRequest << 8 | setup->wValue << 16,
setup->wIndex | setup->wLength << 16,
@@ -2307,7 +2337,7 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
if (urb->transfer_buffer_length > 0) {
if (setup->bRequestType & USB_DIR_IN)
field |= TRB_DIR_IN;
- queue_trb(xhci, ep_ring, false,
+ queue_trb(xhci, ep_ring, false, true,
lower_32_bits(urb->transfer_dma),
upper_32_bits(urb->transfer_dma),
length_field,
@@ -2324,7 +2354,7 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
field = 0;
else
field = TRB_DIR_IN;
- queue_trb(xhci, ep_ring, false,
+ queue_trb(xhci, ep_ring, false, false,
0,
0,
TRB_INTR_TARGET(0),
@@ -2350,18 +2380,21 @@ static int queue_command(struct xhci_hcd *xhci, u32 field1, u32 field2,
u32 field3, u32 field4, bool command_must_succeed)
{
int reserved_trbs = xhci->cmd_ring_reserved_trbs;
+ int ret;
+
if (!command_must_succeed)
reserved_trbs++;
- if (!room_on_ring(xhci, xhci->cmd_ring, reserved_trbs)) {
- if (!in_interrupt())
- xhci_err(xhci, "ERR: No room for command on command ring\n");
+ ret = prepare_ring(xhci, xhci->cmd_ring, EP_STATE_RUNNING,
+ reserved_trbs, GFP_ATOMIC);
+ if (ret < 0) {
+ xhci_err(xhci, "ERR: No room for command on command ring\n");
if (command_must_succeed)
xhci_err(xhci, "ERR: Reserved TRB counting for "
"unfailable commands failed.\n");
- return -ENOMEM;
+ return ret;
}
- queue_trb(xhci, xhci->cmd_ring, false, field1, field2, field3,
+ queue_trb(xhci, xhci->cmd_ring, false, false, field1, field2, field3,
field4 | xhci->cmd_ring->cycle_state);
return 0;
}
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 27345cd04da..3998f72cd0c 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -2134,6 +2134,8 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
/* If this is a Set Address to an unconfigured device, setup ep 0 */
if (!udev->config)
xhci_setup_addressable_virt_dev(xhci, udev);
+ else
+ xhci_copy_ep0_dequeue_into_input_ctx(xhci, udev);
/* Otherwise, assume the core has the device configured how it wants */
xhci_dbg(xhci, "Slot ID %d Input Context:\n", udev->slot_id);
xhci_dbg_ctx(xhci, virt_dev->in_ctx, 2);
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 8b4b7d39f79..6c7e3430ec9 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1292,6 +1292,8 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags);
void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id);
int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id, struct usb_device *udev, gfp_t flags);
int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *udev);
+void xhci_copy_ep0_dequeue_into_input_ctx(struct xhci_hcd *xhci,
+ struct usb_device *udev);
unsigned int xhci_get_endpoint_index(struct usb_endpoint_descriptor *desc);
unsigned int xhci_get_endpoint_flag(struct usb_endpoint_descriptor *desc);
unsigned int xhci_get_endpoint_flag_from_index(unsigned int ep_index);
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-24 15:38:07 +0000