summaryrefslogtreecommitdiffstats
path: root/drivers/usb/host
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/host')
-rw-r--r--drivers/usb/host/xhci-hub.c210
1 files changed, 119 insertions, 91 deletions
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 1d3545943c5..83fc636fa25 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -534,6 +534,118 @@ void xhci_del_comp_mod_timer(struct xhci_hcd *xhci, u32 status, u16 wIndex)
}
}
+/*
+ * Converts a raw xHCI port status into the format that external USB 2.0 or USB
+ * 3.0 hubs use.
+ *
+ * Possible side effects:
+ * - Mark a port as being done with device resume,
+ * and ring the endpoint doorbells.
+ * - Stop the Synopsys redriver Compliance Mode polling.
+ */
+static u32 xhci_get_port_status(struct usb_hcd *hcd,
+ struct xhci_bus_state *bus_state,
+ __le32 __iomem **port_array,
+ u16 wIndex, u32 raw_port_status)
+{
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ u32 status = 0;
+ int slot_id;
+
+ /* wPortChange bits */
+ if (raw_port_status & PORT_CSC)
+ status |= USB_PORT_STAT_C_CONNECTION << 16;
+ if (raw_port_status & PORT_PEC)
+ status |= USB_PORT_STAT_C_ENABLE << 16;
+ if ((raw_port_status & PORT_OCC))
+ status |= USB_PORT_STAT_C_OVERCURRENT << 16;
+ if ((raw_port_status & PORT_RC))
+ status |= USB_PORT_STAT_C_RESET << 16;
+ /* USB3.0 only */
+ if (hcd->speed == HCD_USB3) {
+ if ((raw_port_status & PORT_PLC))
+ status |= USB_PORT_STAT_C_LINK_STATE << 16;
+ if ((raw_port_status & PORT_WRC))
+ status |= USB_PORT_STAT_C_BH_RESET << 16;
+ }
+
+ if (hcd->speed != HCD_USB3) {
+ if ((raw_port_status & PORT_PLS_MASK) == XDEV_U3
+ && (raw_port_status & PORT_POWER))
+ status |= USB_PORT_STAT_SUSPEND;
+ }
+ if ((raw_port_status & PORT_PLS_MASK) == XDEV_RESUME &&
+ !DEV_SUPERSPEED(raw_port_status)) {
+ if ((raw_port_status & PORT_RESET) ||
+ !(raw_port_status & PORT_PE))
+ return 0xffffffff;
+ if (time_after_eq(jiffies,
+ bus_state->resume_done[wIndex])) {
+ xhci_dbg(xhci, "Resume USB2 port %d\n",
+ wIndex + 1);
+ bus_state->resume_done[wIndex] = 0;
+ clear_bit(wIndex, &bus_state->resuming_ports);
+ xhci_set_link_state(xhci, port_array, wIndex,
+ XDEV_U0);
+ xhci_dbg(xhci, "set port %d resume\n",
+ wIndex + 1);
+ slot_id = xhci_find_slot_id_by_port(hcd, xhci,
+ wIndex + 1);
+ if (!slot_id) {
+ xhci_dbg(xhci, "slot_id is zero\n");
+ return 0xffffffff;
+ }
+ xhci_ring_device(xhci, slot_id);
+ bus_state->port_c_suspend |= 1 << wIndex;
+ bus_state->suspended_ports &= ~(1 << wIndex);
+ } else {
+ /*
+ * The resume has been signaling for less than
+ * 20ms. Report the port status as SUSPEND,
+ * let the usbcore check port status again
+ * and clear resume signaling later.
+ */
+ status |= USB_PORT_STAT_SUSPEND;
+ }
+ }
+ if ((raw_port_status & PORT_PLS_MASK) == XDEV_U0
+ && (raw_port_status & PORT_POWER)
+ && (bus_state->suspended_ports & (1 << wIndex))) {
+ bus_state->suspended_ports &= ~(1 << wIndex);
+ if (hcd->speed != HCD_USB3)
+ bus_state->port_c_suspend |= 1 << wIndex;
+ }
+ if (raw_port_status & PORT_CONNECT) {
+ status |= USB_PORT_STAT_CONNECTION;
+ status |= xhci_port_speed(raw_port_status);
+ }
+ if (raw_port_status & PORT_PE)
+ status |= USB_PORT_STAT_ENABLE;
+ if (raw_port_status & PORT_OC)
+ status |= USB_PORT_STAT_OVERCURRENT;
+ if (raw_port_status & PORT_RESET)
+ status |= USB_PORT_STAT_RESET;
+ if (raw_port_status & PORT_POWER) {
+ if (hcd->speed == HCD_USB3)
+ status |= USB_SS_PORT_STAT_POWER;
+ else
+ status |= USB_PORT_STAT_POWER;
+ }
+ /* Update Port Link State for super speed ports*/
+ if (hcd->speed == HCD_USB3) {
+ xhci_hub_report_link_state(&status, raw_port_status);
+ /*
+ * Verify if all USB3 Ports Have entered U0 already.
+ * Delete Compliance Mode Timer if so.
+ */
+ xhci_del_comp_mod_timer(xhci, raw_port_status, wIndex);
+ }
+ if (bus_state->port_c_suspend & (1 << wIndex))
+ status |= 1 << USB_PORT_FEAT_C_SUSPEND;
+
+ return status;
+}
+
int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
u16 wIndex, char *buf, u16 wLength)
{
@@ -598,104 +710,20 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
if (!wIndex || wIndex > max_ports)
goto error;
wIndex--;
- status = 0;
temp = xhci_readl(xhci, port_array[wIndex]);
if (temp == 0xffffffff) {
retval = -ENODEV;
break;
}
- xhci_dbg(xhci, "get port status, actual port %d status = 0x%x\n", wIndex, temp);
-
- /* wPortChange bits */
- if (temp & PORT_CSC)
- status |= USB_PORT_STAT_C_CONNECTION << 16;
- if (temp & PORT_PEC)
- status |= USB_PORT_STAT_C_ENABLE << 16;
- if ((temp & PORT_OCC))
- status |= USB_PORT_STAT_C_OVERCURRENT << 16;
- if ((temp & PORT_RC))
- status |= USB_PORT_STAT_C_RESET << 16;
- /* USB3.0 only */
- if (hcd->speed == HCD_USB3) {
- if ((temp & PORT_PLC))
- status |= USB_PORT_STAT_C_LINK_STATE << 16;
- if ((temp & PORT_WRC))
- status |= USB_PORT_STAT_C_BH_RESET << 16;
- }
+ status = xhci_get_port_status(hcd, bus_state, port_array,
+ wIndex, temp);
+ if (status == 0xffffffff)
+ goto error;
- if (hcd->speed != HCD_USB3) {
- if ((temp & PORT_PLS_MASK) == XDEV_U3
- && (temp & PORT_POWER))
- status |= USB_PORT_STAT_SUSPEND;
- }
- if ((temp & PORT_PLS_MASK) == XDEV_RESUME &&
- !DEV_SUPERSPEED(temp)) {
- if ((temp & PORT_RESET) || !(temp & PORT_PE))
- goto error;
- if (time_after_eq(jiffies,
- bus_state->resume_done[wIndex])) {
- xhci_dbg(xhci, "Resume USB2 port %d\n",
- wIndex + 1);
- bus_state->resume_done[wIndex] = 0;
- clear_bit(wIndex, &bus_state->resuming_ports);
- xhci_set_link_state(xhci, port_array, wIndex,
- XDEV_U0);
- xhci_dbg(xhci, "set port %d resume\n",
- wIndex + 1);
- slot_id = xhci_find_slot_id_by_port(hcd, xhci,
- wIndex + 1);
- if (!slot_id) {
- xhci_dbg(xhci, "slot_id is zero\n");
- goto error;
- }
- xhci_ring_device(xhci, slot_id);
- bus_state->port_c_suspend |= 1 << wIndex;
- bus_state->suspended_ports &= ~(1 << wIndex);
- } else {
- /*
- * The resume has been signaling for less than
- * 20ms. Report the port status as SUSPEND,
- * let the usbcore check port status again
- * and clear resume signaling later.
- */
- status |= USB_PORT_STAT_SUSPEND;
- }
- }
- if ((temp & PORT_PLS_MASK) == XDEV_U0
- && (temp & PORT_POWER)
- && (bus_state->suspended_ports & (1 << wIndex))) {
- bus_state->suspended_ports &= ~(1 << wIndex);
- if (hcd->speed != HCD_USB3)
- bus_state->port_c_suspend |= 1 << wIndex;
- }
- if (temp & PORT_CONNECT) {
- status |= USB_PORT_STAT_CONNECTION;
- status |= xhci_port_speed(temp);
- }
- if (temp & PORT_PE)
- status |= USB_PORT_STAT_ENABLE;
- if (temp & PORT_OC)
- status |= USB_PORT_STAT_OVERCURRENT;
- if (temp & PORT_RESET)
- status |= USB_PORT_STAT_RESET;
- if (temp & PORT_POWER) {
- if (hcd->speed == HCD_USB3)
- status |= USB_SS_PORT_STAT_POWER;
- else
- status |= USB_PORT_STAT_POWER;
- }
- /* Update Port Link State for super speed ports*/
- if (hcd->speed == HCD_USB3) {
- xhci_hub_report_link_state(&status, temp);
- /*
- * Verify if all USB3 Ports Have entered U0 already.
- * Delete Compliance Mode Timer if so.
- */
- xhci_del_comp_mod_timer(xhci, temp, wIndex);
- }
- if (bus_state->port_c_suspend & (1 << wIndex))
- status |= 1 << USB_PORT_FEAT_C_SUSPEND;
+ xhci_dbg(xhci, "get port status, actual port %d status = 0x%x\n",
+ wIndex, temp);
xhci_dbg(xhci, "Get port status returned 0x%x\n", status);
+
put_unaligned(cpu_to_le32(status), (__le32 *) buf);
break;
case SetPortFeature:
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-20 14:36:32 +0000