summaryrefslogtreecommitdiffstats
path: root/drivers/usb/input/xpad.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/input/xpad.c')
-rw-r--r--drivers/usb/input/xpad.c178
1 files changed, 134 insertions, 44 deletions
diff --git a/drivers/usb/input/xpad.c b/drivers/usb/input/xpad.c
index cebb6c463bf..df97e5c803f 100644
--- a/drivers/usb/input/xpad.c
+++ b/drivers/usb/input/xpad.c
@@ -1,8 +1,13 @@
/*
- * X-Box gamepad - v0.0.5
+ * X-Box gamepad - v0.0.6
*
* Copyright (c) 2002 Marko Friedemann <mfr@bmx-chemnitz.de>
- *
+ * 2004 Oliver Schwartz <Oliver.Schwartz@gmx.de>,
+ * Steven Toth <steve@toth.demon.co.uk>,
+ * Franz Lehner <franz@caos.at>,
+ * Ivan Hawkes <blackhawk@ivanhawkes.com>
+ * 2005 Dominic Cerquetti <binary1230@yahoo.com>
+ * 2006 Adam Buchbinder <adam.buchbinder@gmail.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
@@ -28,11 +33,13 @@
* - ITO Takayuki for providing essential xpad information on his website
* - Vojtech Pavlik - iforce driver / input subsystem
* - Greg Kroah-Hartman - usb-skeleton driver
+ * - XBOX Linux project - extra USB id's
*
* TODO:
- * - fine tune axes
+ * - fine tune axes (especially trigger axes)
* - fix "analog" buttons (reported as digital now)
* - get rumble working
+ * - need USB IDs for other dance pads
*
* History:
*
@@ -52,30 +59,79 @@
* - fixed d-pad to axes mapping
*
* 2002-07-17 - 0.0.5 : simplified d-pad handling
+ *
+ * 2004-10-02 - 0.0.6 : DDR pad support
+ * - borrowed from the XBOX linux kernel
+ * - USB id's for commonly used dance pads are present
+ * - dance pads will map D-PAD to buttons, not axes
+ * - pass the module paramater 'dpad_to_buttons' to force
+ * the D-PAD to map to buttons if your pad is not detected
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/stat.h>
#include <linux/module.h>
+#include <linux/moduleparam.h>
#include <linux/smp_lock.h>
#include <linux/usb/input.h>
-#define DRIVER_VERSION "v0.0.5"
+#define DRIVER_VERSION "v0.0.6"
#define DRIVER_AUTHOR "Marko Friedemann <mfr@bmx-chemnitz.de>"
#define DRIVER_DESC "X-Box pad driver"
#define XPAD_PKT_LEN 32
+/* xbox d-pads should map to buttons, as is required for DDR pads
+ but we map them to axes when possible to simplify things */
+#define MAP_DPAD_TO_BUTTONS 0
+#define MAP_DPAD_TO_AXES 1
+#define MAP_DPAD_UNKNOWN -1
+
+static int dpad_to_buttons;
+module_param(dpad_to_buttons, bool, S_IRUGO);
+MODULE_PARM_DESC(dpad_to_buttons, "Map D-PAD to buttons rather than axes for unknown pads");
+
static const struct xpad_device {
u16 idVendor;
u16 idProduct;
char *name;
+ u8 dpad_mapping;
} xpad_device[] = {
- { 0x045e, 0x0202, "Microsoft X-Box pad (US)" },
- { 0x045e, 0x0285, "Microsoft X-Box pad (Japan)" },
- { 0x05fd, 0x107a, "InterAct 'PowerPad Pro' X-Box pad (Germany)" },
- { 0x0000, 0x0000, "X-Box pad" }
+ { 0x045e, 0x0202, "Microsoft X-Box pad v1 (US)", MAP_DPAD_TO_AXES },
+ { 0x045e, 0x0289, "Microsoft X-Box pad v2 (US)", MAP_DPAD_TO_AXES },
+ { 0x045e, 0x0285, "Microsoft X-Box pad (Japan)", MAP_DPAD_TO_AXES },
+ { 0x045e, 0x0287, "Microsoft Xbox Controller S", MAP_DPAD_TO_AXES },
+ { 0x0c12, 0x8809, "RedOctane Xbox Dance Pad", MAP_DPAD_TO_BUTTONS },
+ { 0x044f, 0x0f07, "Thrustmaster, Inc. Controller", MAP_DPAD_TO_AXES },
+ { 0x046d, 0xca84, "Logitech Xbox Cordless Controller", MAP_DPAD_TO_AXES },
+ { 0x046d, 0xca88, "Logitech Compact Controller for Xbox", MAP_DPAD_TO_AXES },
+ { 0x05fd, 0x1007, "Mad Catz Controller (unverified)", MAP_DPAD_TO_AXES },
+ { 0x05fd, 0x107a, "InterAct 'PowerPad Pro' X-Box pad (Germany)", MAP_DPAD_TO_AXES },
+ { 0x0738, 0x4516, "Mad Catz Control Pad", MAP_DPAD_TO_AXES },
+ { 0x0738, 0x4522, "Mad Catz LumiCON", MAP_DPAD_TO_AXES },
+ { 0x0738, 0x4526, "Mad Catz Control Pad Pro", MAP_DPAD_TO_AXES },
+ { 0x0738, 0x4536, "Mad Catz MicroCON", MAP_DPAD_TO_AXES },
+ { 0x0738, 0x4540, "Mad Catz Beat Pad", MAP_DPAD_TO_BUTTONS },
+ { 0x0738, 0x4556, "Mad Catz Lynx Wireless Controller", MAP_DPAD_TO_AXES },
+ { 0x0738, 0x6040, "Mad Catz Beat Pad Pro", MAP_DPAD_TO_BUTTONS },
+ { 0x0c12, 0x8802, "Zeroplus Xbox Controller", MAP_DPAD_TO_AXES },
+ { 0x0c12, 0x8810, "Zeroplus Xbox Controller", MAP_DPAD_TO_AXES },
+ { 0x0c12, 0x9902, "HAMA VibraX - *FAULTY HARDWARE*", MAP_DPAD_TO_AXES },
+ { 0x0e4c, 0x1097, "Radica Gamester Controller", MAP_DPAD_TO_AXES },
+ { 0x0e4c, 0x2390, "Radica Games Jtech Controller", MAP_DPAD_TO_AXES},
+ { 0x0e6f, 0x0003, "Logic3 Freebird wireless Controller", MAP_DPAD_TO_AXES },
+ { 0x0e6f, 0x0005, "Eclipse wireless Controller", MAP_DPAD_TO_AXES },
+ { 0x0e6f, 0x0006, "Edge wireless Controller", MAP_DPAD_TO_AXES },
+ { 0x0e8f, 0x0201, "SmartJoy Frag Xpad/PS2 adaptor", MAP_DPAD_TO_AXES },
+ { 0x0f30, 0x0202, "Joytech Advanced Controller", MAP_DPAD_TO_AXES },
+ { 0x0f30, 0x8888, "BigBen XBMiniPad Controller", MAP_DPAD_TO_AXES },
+ { 0x102c, 0xff0c, "Joytech Wireless Advanced Controller", MAP_DPAD_TO_AXES },
+ { 0x12ab, 0x8809, "Xbox DDR dancepad", MAP_DPAD_TO_BUTTONS },
+ { 0x1430, 0x8888, "TX6500+ Dance Pad (first generation)", MAP_DPAD_TO_BUTTONS },
+ { 0xffff, 0xffff, "Chinese-made Xbox Controller", MAP_DPAD_TO_AXES },
+ { 0x0000, 0x0000, "Generic X-Box pad", MAP_DPAD_UNKNOWN }
};
static const signed short xpad_btn[] = {
@@ -84,11 +140,23 @@ static const signed short xpad_btn[] = {
-1 /* terminating entry */
};
+/* only used if MAP_DPAD_TO_BUTTONS */
+static const signed short xpad_btn_pad[] = {
+ BTN_LEFT, BTN_RIGHT, /* d-pad left, right */
+ BTN_0, BTN_1, /* d-pad up, down (XXX names??) */
+ -1 /* terminating entry */
+};
+
static const signed short xpad_abs[] = {
ABS_X, ABS_Y, /* left stick */
ABS_RX, ABS_RY, /* right stick */
ABS_Z, ABS_RZ, /* triggers left/right */
- ABS_HAT0X, ABS_HAT0Y, /* digital pad */
+ -1 /* terminating entry */
+};
+
+/* only used if MAP_DPAD_TO_AXES */
+static const signed short xpad_abs_pad[] = {
+ ABS_HAT0X, ABS_HAT0Y, /* d-pad axes */
-1 /* terminating entry */
};
@@ -100,14 +168,16 @@ static struct usb_device_id xpad_table [] = {
MODULE_DEVICE_TABLE (usb, xpad_table);
struct usb_xpad {
- struct input_dev *dev; /* input device interface */
- struct usb_device *udev; /* usb device */
+ struct input_dev *dev; /* input device interface */
+ struct usb_device *udev; /* usb device */
- struct urb *irq_in; /* urb for interrupt in report */
- unsigned char *idata; /* input data */
+ struct urb *irq_in; /* urb for interrupt in report */
+ unsigned char *idata; /* input data */
dma_addr_t idata_dma;
- char phys[65]; /* physical device path */
+ char phys[65]; /* physical device path */
+
+ int dpad_mapping; /* map d-pad to buttons or to axes */
};
/*
@@ -137,14 +207,21 @@ static void xpad_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char *d
input_report_abs(dev, ABS_RZ, data[11]);
/* digital pad */
- input_report_abs(dev, ABS_HAT0X, !!(data[2] & 0x08) - !!(data[2] & 0x04));
- input_report_abs(dev, ABS_HAT0Y, !!(data[2] & 0x02) - !!(data[2] & 0x01));
+ if (xpad->dpad_mapping == MAP_DPAD_TO_AXES) {
+ input_report_abs(dev, ABS_HAT0X, !!(data[2] & 0x08) - !!(data[2] & 0x04));
+ input_report_abs(dev, ABS_HAT0Y, !!(data[2] & 0x02) - !!(data[2] & 0x01));
+ } else /* xpad->dpad_mapping == MAP_DPAD_TO_BUTTONS */ {
+ input_report_key(dev, BTN_LEFT, data[2] & 0x04);
+ input_report_key(dev, BTN_RIGHT, data[2] & 0x08);
+ input_report_key(dev, BTN_0, data[2] & 0x01); // up
+ input_report_key(dev, BTN_1, data[2] & 0x02); // down
+ }
/* start/back buttons and stick press left/right */
- input_report_key(dev, BTN_START, (data[2] & 0x10) >> 4);
- input_report_key(dev, BTN_BACK, (data[2] & 0x20) >> 5);
- input_report_key(dev, BTN_THUMBL, (data[2] & 0x40) >> 6);
- input_report_key(dev, BTN_THUMBR, data[2] >> 7);
+ input_report_key(dev, BTN_START, data[2] & 0x10);
+ input_report_key(dev, BTN_BACK, data[2] & 0x20);
+ input_report_key(dev, BTN_THUMBL, data[2] & 0x40);
+ input_report_key(dev, BTN_THUMBR, data[2] & 0x80);
/* "analog" buttons A, B, X, Y */
input_report_key(dev, BTN_A, data[4]);
@@ -206,6 +283,28 @@ static void xpad_close (struct input_dev *dev)
usb_kill_urb(xpad->irq_in);
}
+static void xpad_set_up_abs(struct input_dev *input_dev, signed short abs)
+{
+ set_bit(abs, input_dev->absbit);
+
+ switch (abs) {
+ case ABS_X:
+ case ABS_Y:
+ case ABS_RX:
+ case ABS_RY: /* the two sticks */
+ input_set_abs_params(input_dev, abs, -32768, 32767, 16, 128);
+ break;
+ case ABS_Z:
+ case ABS_RZ: /* the triggers */
+ input_set_abs_params(input_dev, abs, 0, 255, 0, 0);
+ break;
+ case ABS_HAT0X:
+ case ABS_HAT0Y: /* the d-pad (only if MAP_DPAD_TO_AXES) */
+ input_set_abs_params(input_dev, abs, -1, 1, 0, 0);
+ break;
+ }
+}
+
static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id)
{
struct usb_device *udev = interface_to_usbdev (intf);
@@ -235,6 +334,9 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
goto fail2;
xpad->udev = udev;
+ xpad->dpad_mapping = xpad_device[i].dpad_mapping;
+ if (xpad->dpad_mapping == MAP_DPAD_UNKNOWN)
+ xpad->dpad_mapping = dpad_to_buttons;
xpad->dev = input_dev;
usb_make_path(udev, xpad->phys, sizeof(xpad->phys));
strlcat(xpad->phys, "/input0", sizeof(xpad->phys));
@@ -249,32 +351,19 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+ /* set up buttons */
for (i = 0; xpad_btn[i] >= 0; i++)
set_bit(xpad_btn[i], input_dev->keybit);
+ if (xpad->dpad_mapping == MAP_DPAD_TO_BUTTONS)
+ for (i = 0; xpad_btn_pad[i] >= 0; i++)
+ set_bit(xpad_btn_pad[i], input_dev->keybit);
- for (i = 0; xpad_abs[i] >= 0; i++) {
-
- signed short t = xpad_abs[i];
-
- set_bit(t, input_dev->absbit);
-
- switch (t) {
- case ABS_X:
- case ABS_Y:
- case ABS_RX:
- case ABS_RY: /* the two sticks */
- input_set_abs_params(input_dev, t, -32768, 32767, 16, 128);
- break;
- case ABS_Z:
- case ABS_RZ: /* the triggers */
- input_set_abs_params(input_dev, t, 0, 255, 0, 0);
- break;
- case ABS_HAT0X:
- case ABS_HAT0Y: /* the d-pad */
- input_set_abs_params(input_dev, t, -1, 1, 0, 0);
- break;
- }
- }
+ /* set up axes */
+ for (i = 0; xpad_abs[i] >= 0; i++)
+ xpad_set_up_abs(input_dev, xpad_abs[i]);
+ if (xpad->dpad_mapping == MAP_DPAD_TO_AXES)
+ for (i = 0; xpad_abs_pad[i] >= 0; i++)
+ xpad_set_up_abs(input_dev, xpad_abs_pad[i]);
ep_irq_in = &intf->cur_altsetting->endpoint[0].desc;
usb_fill_int_urb(xpad->irq_in, udev,
@@ -305,7 +394,8 @@ static void xpad_disconnect(struct usb_interface *intf)
usb_kill_urb(xpad->irq_in);
input_unregister_device(xpad->dev);
usb_free_urb(xpad->irq_in);
- usb_buffer_free(interface_to_usbdev(intf), XPAD_PKT_LEN, xpad->idata, xpad->idata_dma);
+ usb_buffer_free(interface_to_usbdev(intf), XPAD_PKT_LEN,
+ xpad->idata, xpad->idata_dma);
kfree(xpad);
}
}