diff options
Diffstat (limited to 'drivers/usb/input')
25 files changed, 1007 insertions, 118 deletions
diff --git a/drivers/usb/input/Kconfig b/drivers/usb/input/Kconfig index 1e53934907c..5246b35301d 100644 --- a/drivers/usb/input/Kconfig +++ b/drivers/usb/input/Kconfig @@ -37,6 +37,16 @@ config USB_HIDINPUT If unsure, say Y. +config USB_HIDINPUT_POWERBOOK + bool "Enable support for iBook/PowerBook special keys" + default n + depends on USB_HIDINPUT + help + Say Y here if you want support for the special keys (Fn, Numlock) on + Apple iBooks and PowerBooks. + + If unsure, say N. + config HID_FF bool "Force feedback support (EXPERIMENTAL)" depends on USB_HIDINPUT && EXPERIMENTAL @@ -273,6 +283,20 @@ config USB_ATI_REMOTE To compile this driver as a module, choose M here: the module will be called ati_remote. +config USB_ATI_REMOTE2 + tristate "ATI / Philips USB RF remote control" + depends on USB && INPUT + ---help--- + Say Y here if you want to use an ATI or Philips USB RF remote control. + These are RF remotes with USB receivers. + ATI Remote Wonder II comes with some ATI's All-In-Wonder video cards + and is also available as a separate product. + This driver provides mouse pointer, left and right mouse buttons, + and maps all the other remote buttons to keypress events. + + To compile this driver as a module, choose M here: the module will be + called ati_remote2. + config USB_KEYSPAN_REMOTE tristate "Keyspan DMR USB remote control (EXPERIMENTAL)" depends on USB && INPUT && EXPERIMENTAL diff --git a/drivers/usb/input/Makefile b/drivers/usb/input/Makefile index 07cb17db42f..d512d9f488f 100644 --- a/drivers/usb/input/Makefile +++ b/drivers/usb/input/Makefile @@ -28,6 +28,7 @@ endif obj-$(CONFIG_USB_AIPTEK) += aiptek.o obj-$(CONFIG_USB_ATI_REMOTE) += ati_remote.o +obj-$(CONFIG_USB_ATI_REMOTE2) += ati_remote2.o obj-$(CONFIG_USB_HID) += usbhid.o obj-$(CONFIG_USB_KBD) += usbkbd.o obj-$(CONFIG_USB_KBTAB) += kbtab.o diff --git a/drivers/usb/input/acecad.c b/drivers/usb/input/acecad.c index a32558b4048..df29b8078b5 100644 --- a/drivers/usb/input/acecad.c +++ b/drivers/usb/input/acecad.c @@ -261,7 +261,6 @@ static struct usb_device_id usb_acecad_id_table [] = { MODULE_DEVICE_TABLE(usb, usb_acecad_id_table); static struct usb_driver usb_acecad_driver = { - .owner = THIS_MODULE, .name = "usb_acecad", .probe = usb_acecad_probe, .disconnect = usb_acecad_disconnect, diff --git a/drivers/usb/input/aiptek.c b/drivers/usb/input/aiptek.c index 0e2505c073d..a6693b0d1c4 100644 --- a/drivers/usb/input/aiptek.c +++ b/drivers/usb/input/aiptek.c @@ -338,7 +338,7 @@ struct aiptek { * the bitmap which comes from the tablet. This hides the * issue that the F_keys are not sequentially numbered. */ -static int macroKeyEvents[] = { +static const int macroKeyEvents[] = { KEY_ESC, KEY_F1, KEY_F2, KEY_F3, KEY_F4, KEY_F5, KEY_F6, KEY_F7, KEY_F8, KEY_F9, KEY_F10, KEY_F11, KEY_F12, KEY_F13, KEY_F14, KEY_F15, KEY_F16, KEY_F17, @@ -2093,7 +2093,7 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id) /* Programming the tablet macro keys needs to be done with a for loop * as the keycodes are discontiguous. */ - for (i = 0; i < sizeof(macroKeyEvents) / sizeof(macroKeyEvents[0]); ++i) + for (i = 0; i < ARRAY_SIZE(macroKeyEvents); ++i) set_bit(macroKeyEvents[i], inputdev->keybit); /* @@ -2135,7 +2135,7 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id) * not an error :-) */ - for (i = 0; i < sizeof(speeds) / sizeof(speeds[0]); ++i) { + for (i = 0; i < ARRAY_SIZE(speeds); ++i) { aiptek->curSetting.programmableDelay = speeds[i]; (void)aiptek_program_tablet(aiptek); if (aiptek->inputdev->absmax[ABS_X] > 0) { @@ -2190,7 +2190,6 @@ fail1: input_free_device(inputdev); static void aiptek_disconnect(struct usb_interface *intf); static struct usb_driver aiptek_driver = { - .owner = THIS_MODULE, .name = "aiptek", .probe = aiptek_probe, .disconnect = aiptek_disconnect, diff --git a/drivers/usb/input/appletouch.c b/drivers/usb/input/appletouch.c index 15840db092a..c222ed13dea 100644 --- a/drivers/usb/input/appletouch.c +++ b/drivers/usb/input/appletouch.c @@ -6,6 +6,7 @@ * Copyright (C) 2005 Stelian Pop (stelian@popies.net) * Copyright (C) 2005 Frank Arnold (frank@scirocco-5v-turbo.de) * Copyright (C) 2005 Peter Osterlund (petero2@telia.com) + * Copyright (C) 2005 Michael Hanselmann (linux-kernel@hansmi.ch) * * Thanks to Alex Harper <basilisk@foobox.net> for his inputs. * @@ -38,6 +39,11 @@ /* Apple has powerbooks which have the keyboard with different Product IDs */ #define APPLE_VENDOR_ID 0x05AC +/* These names come from Info.plist in AppleUSBTrackpad.kext */ +#define GEYSER_ANSI_PRODUCT_ID 0x0214 +#define GEYSER_ISO_PRODUCT_ID 0x0215 +#define GEYSER_JIS_PRODUCT_ID 0x0216 + #define ATP_DEVICE(prod) \ .match_flags = USB_DEVICE_ID_MATCH_DEVICE | \ USB_DEVICE_ID_MATCH_INT_CLASS | \ @@ -53,13 +59,17 @@ static struct usb_device_id atp_table [] = { { ATP_DEVICE(0x020F) }, { ATP_DEVICE(0x030A) }, { ATP_DEVICE(0x030B) }, - { } /* Terminating entry */ + + /* PowerBooks Oct 2005 */ + { ATP_DEVICE(GEYSER_ANSI_PRODUCT_ID) }, + { ATP_DEVICE(GEYSER_ISO_PRODUCT_ID) }, + { ATP_DEVICE(GEYSER_JIS_PRODUCT_ID) }, + + /* Terminating entry */ + { } }; MODULE_DEVICE_TABLE (usb, atp_table); -/* size of a USB urb transfer */ -#define ATP_DATASIZE 81 - /* * number of sensors. Note that only 16 instead of 26 X (horizontal) * sensors exist on 12" and 15" PowerBooks. All models have 16 Y @@ -108,6 +118,8 @@ struct atp { signed char xy_old[ATP_XSENSORS + ATP_YSENSORS]; /* accumulated sensors */ int xy_acc[ATP_XSENSORS + ATP_YSENSORS]; + int overflowwarn; /* overflow warning printed? */ + int datalen; /* size of an USB urb transfer */ }; #define dbg_dump(msg, tab) \ @@ -124,7 +136,7 @@ struct atp { if (debug) printk(format, ##a); \ } while (0) -MODULE_AUTHOR("Johannes Berg, Stelian Pop, Frank Arnold"); +MODULE_AUTHOR("Johannes Berg, Stelian Pop, Frank Arnold, Michael Hanselmann"); MODULE_DESCRIPTION("Apple PowerBooks USB touchpad driver"); MODULE_LICENSE("GPL"); @@ -132,6 +144,16 @@ static int debug = 1; module_param(debug, int, 0644); MODULE_PARM_DESC(debug, "Activate debugging output"); +/* Checks if the device a Geyser 2 (ANSI, ISO, JIS) */ +static inline int atp_is_geyser_2(struct atp *dev) +{ + int16_t productId = le16_to_cpu(dev->udev->descriptor.idProduct); + + return (productId == GEYSER_ANSI_PRODUCT_ID) || + (productId == GEYSER_ISO_PRODUCT_ID) || + (productId == GEYSER_JIS_PRODUCT_ID); +} + static int atp_calculate_abs(int *xy_sensors, int nb_sensors, int fact, int *z, int *fingers) { @@ -168,13 +190,20 @@ static inline void atp_report_fingers(struct input_dev *input, int fingers) static void atp_complete(struct urb* urb, struct pt_regs* regs) { int x, y, x_z, y_z, x_f, y_f; - int retval, i; + int retval, i, j; struct atp *dev = urb->context; switch (urb->status) { case 0: /* success */ break; + case -EOVERFLOW: + if(!dev->overflowwarn) { + printk("appletouch: OVERFLOW with data " + "length %d, actual length is %d\n", + dev->datalen, dev->urb->actual_length); + dev->overflowwarn = 1; + } case -ECONNRESET: case -ENOENT: case -ESHUTDOWN: @@ -189,23 +218,45 @@ static void atp_complete(struct urb* urb, struct pt_regs* regs) } /* drop incomplete datasets */ - if (dev->urb->actual_length != ATP_DATASIZE) { + if (dev->urb->actual_length != dev->datalen) { dprintk("appletouch: incomplete data package.\n"); goto exit; } /* reorder the sensors values */ - for (i = 0; i < 8; i++) { - /* X values */ - dev->xy_cur[i ] = dev->data[5 * i + 2]; - dev->xy_cur[i + 8] = dev->data[5 * i + 4]; - dev->xy_cur[i + 16] = dev->data[5 * i + 42]; - if (i < 2) - dev->xy_cur[i + 24] = dev->data[5 * i + 44]; - - /* Y values */ - dev->xy_cur[i + 26] = dev->data[5 * i + 1]; - dev->xy_cur[i + 34] = dev->data[5 * i + 3]; + if (atp_is_geyser_2(dev)) { + memset(dev->xy_cur, 0, sizeof(dev->xy_cur)); + + /* + * The values are laid out like this: + * Y1, Y2, -, Y3, Y4, -, ..., X1, X2, -, X3, X4, -, ... + * '-' is an unused value. + */ + + /* read X values */ + for (i = 0, j = 19; i < 20; i += 2, j += 3) { + dev->xy_cur[i] = dev->data[j]; + dev->xy_cur[i + 1] = dev->data[j + 1]; + } + + /* read Y values */ + for (i = 0, j = 1; i < 9; i += 2, j += 3) { + dev->xy_cur[ATP_XSENSORS + i] = dev->data[j]; + dev->xy_cur[ATP_XSENSORS + i + 1] = dev->data[j + 1]; + } + } else { + for (i = 0; i < 8; i++) { + /* X values */ + dev->xy_cur[i ] = dev->data[5 * i + 2]; + dev->xy_cur[i + 8] = dev->data[5 * i + 4]; + dev->xy_cur[i + 16] = dev->data[5 * i + 42]; + if (i < 2) + dev->xy_cur[i + 24] = dev->data[5 * i + 44]; + + /* Y values */ + dev->xy_cur[i + 26] = dev->data[5 * i + 1]; + dev->xy_cur[i + 34] = dev->data[5 * i + 3]; + } } dbg_dump("sample", dev->xy_cur); @@ -216,16 +267,24 @@ static void atp_complete(struct urb* urb, struct pt_regs* regs) dev->x_old = dev->y_old = -1; memcpy(dev->xy_old, dev->xy_cur, sizeof(dev->xy_old)); - /* 17" Powerbooks have 10 extra X sensors */ - for (i = 16; i < ATP_XSENSORS; i++) - if (dev->xy_cur[i]) { - printk("appletouch: 17\" model detected.\n"); + /* 17" Powerbooks have extra X sensors */ + for (i = (atp_is_geyser_2(dev)?15:16); i < ATP_XSENSORS; i++) { + if (!dev->xy_cur[i]) continue; + + printk("appletouch: 17\" model detected.\n"); + if(atp_is_geyser_2(dev)) + input_set_abs_params(dev->input, ABS_X, 0, + (20 - 1) * + ATP_XFACT - 1, + ATP_FUZZ, 0); + else input_set_abs_params(dev->input, ABS_X, 0, (ATP_XSENSORS - 1) * ATP_XFACT - 1, ATP_FUZZ, 0); - break; - } + + break; + } goto exit; } @@ -282,7 +341,8 @@ static void atp_complete(struct urb* urb, struct pt_regs* regs) memset(dev->xy_acc, 0, sizeof(dev->xy_acc)); } - input_report_key(dev->input, BTN_LEFT, !!dev->data[80]); + input_report_key(dev->input, BTN_LEFT, + !!dev->data[dev->datalen - 1]); input_sync(dev->input); @@ -353,6 +413,8 @@ static int atp_probe(struct usb_interface *iface, const struct usb_device_id *id dev->udev = udev; dev->input = input_dev; + dev->overflowwarn = 0; + dev->datalen = (atp_is_geyser_2(dev)?64:81); dev->urb = usb_alloc_urb(0, GFP_KERNEL); if (!dev->urb) { @@ -360,7 +422,7 @@ static int atp_probe(struct usb_interface *iface, const struct usb_device_id *id goto err_free_devs; } - dev->data = usb_buffer_alloc(dev->udev, ATP_DATASIZE, GFP_KERNEL, + dev->data = usb_buffer_alloc(dev->udev, dev->datalen, GFP_KERNEL, &dev->urb->transfer_dma); if (!dev->data) { retval = -ENOMEM; @@ -369,7 +431,7 @@ static int atp_probe(struct usb_interface *iface, const struct usb_device_id *id usb_fill_int_urb(dev->urb, udev, usb_rcvintpipe(udev, int_in_endpointAddr), - dev->data, ATP_DATASIZE, atp_complete, dev, 1); + dev->data, dev->datalen, atp_complete, dev, 1); usb_make_path(udev, dev->phys, sizeof(dev->phys)); strlcat(dev->phys, "/input0", sizeof(dev->phys)); @@ -385,14 +447,25 @@ static int atp_probe(struct usb_interface *iface, const struct usb_device_id *id set_bit(EV_ABS, input_dev->evbit); - /* - * 12" and 15" Powerbooks only have 16 x sensors, - * 17" models are detected later. - */ - input_set_abs_params(input_dev, ABS_X, 0, - (16 - 1) * ATP_XFACT - 1, ATP_FUZZ, 0); - input_set_abs_params(input_dev, ABS_Y, 0, - (ATP_YSENSORS - 1) * ATP_YFACT - 1, ATP_FUZZ, 0); + if (atp_is_geyser_2(dev)) { + /* + * Oct 2005 15" PowerBooks have 15 X sensors, 17" are detected + * later. + */ + input_set_abs_params(input_dev, ABS_X, 0, + ((15 - 1) * ATP_XFACT) - 1, ATP_FUZZ, 0); + input_set_abs_params(input_dev, ABS_Y, 0, + ((9 - 1) * ATP_YFACT) - 1, ATP_FUZZ, 0); + } else { + /* + * 12" and 15" Powerbooks only have 16 x sensors, + * 17" models are detected later. + */ + input_set_abs_params(input_dev, ABS_X, 0, + (16 - 1) * ATP_XFACT - 1, ATP_FUZZ, 0); + input_set_abs_params(input_dev, ABS_Y, 0, + (ATP_YSENSORS - 1) * ATP_YFACT - 1, ATP_FUZZ, 0); + } input_set_abs_params(input_dev, ABS_PRESSURE, 0, ATP_PRESSURE, 0, 0); set_bit(EV_KEY, input_dev->evbit); @@ -427,7 +500,7 @@ static void atp_disconnect(struct usb_interface *iface) usb_kill_urb(dev->urb); input_unregister_device(dev->input); usb_free_urb(dev->urb); - usb_buffer_free(dev->udev, ATP_DATASIZE, + usb_buffer_free(dev->udev, dev->datalen, dev->data, dev->urb->transfer_dma); kfree(dev); } @@ -452,7 +525,6 @@ static int atp_resume(struct usb_interface *iface) } static struct usb_driver atp_driver = { - .owner = THIS_MODULE, .name = "appletouch", .probe = atp_probe, .disconnect = atp_disconnect, diff --git a/drivers/usb/input/ati_remote.c b/drivers/usb/input/ati_remote.c index 9a2a47db949..f7bdc506e61 100644 --- a/drivers/usb/input/ati_remote.c +++ b/drivers/usb/input/ati_remote.c @@ -96,6 +96,7 @@ #include <linux/usb.h> #include <linux/usb_input.h> #include <linux/wait.h> +#include <linux/jiffies.h> /* * Module and Version Information, Module Parameters @@ -146,7 +147,7 @@ static char init1[] = { 0x01, 0x00, 0x20, 0x14 }; static char init2[] = { 0x01, 0x00, 0x20, 0x14, 0x20, 0x20, 0x20 }; /* Acceleration curve for directional control pad */ -static char accel[] = { 1, 2, 4, 6, 9, 13, 20 }; +static const char accel[] = { 1, 2, 4, 6, 9, 13, 20 }; /* Duplicate event filtering time. * Sequential, identical KIND_FILTERED inputs with less than @@ -197,7 +198,7 @@ struct ati_remote { #define KIND_ACCEL 7 /* Directional keypad - left, right, up, down.*/ /* Translation table from hardware messages to input events. */ -static struct { +static const struct { short kind; unsigned char data1, data2; int type; @@ -295,7 +296,6 @@ static void ati_remote_disconnect (struct usb_interface *interface); /* usb specific object to register with the usb subsystem */ static struct usb_driver ati_remote_driver = { - .owner = THIS_MODULE, .name = "ati_remote", .probe = ati_remote_probe, .disconnect = ati_remote_disconnect, @@ -472,7 +472,7 @@ static void ati_remote_input_report(struct urb *urb, struct pt_regs *regs) /* Filter duplicate events which happen "too close" together. */ if ((ati_remote->old_data[0] == data[1]) && (ati_remote->old_data[1] == data[2]) && - ((ati_remote->old_jiffies + FILTER_TIME) > jiffies)) { + time_before(jiffies, ati_remote->old_jiffies + FILTER_TIME)) { ati_remote->repeat_count++; } else { ati_remote->repeat_count = 0; @@ -507,16 +507,16 @@ static void ati_remote_input_report(struct urb *urb, struct pt_regs *regs) * pad down, so we increase acceleration, ramping up over two seconds to * a maximum speed. The acceleration curve is #defined above. */ - if ((jiffies - ati_remote->old_jiffies) > (HZ >> 2)) { + if (time_after(jiffies, ati_remote->old_jiffies + (HZ >> 2))) { acc = 1; ati_remote->acc_jiffies = jiffies; } - else if ((jiffies - ati_remote->acc_jiffies) < (HZ >> 3)) acc = accel[0]; - else if ((jiffies - ati_remote->acc_jiffies) < (HZ >> 2)) acc = accel[1]; - else if ((jiffies - ati_remote->acc_jiffies) < (HZ >> 1)) acc = accel[2]; - else if ((jiffies - ati_remote->acc_jiffies) < HZ ) acc = accel[3]; - else if ((jiffies - ati_remote->acc_jiffies) < HZ+(HZ>>1)) acc = accel[4]; - else if ((jiffies - ati_remote->acc_jiffies) < (HZ << 1)) acc = accel[5]; + else if (time_before(jiffies, ati_remote->acc_jiffies + (HZ >> 3))) acc = accel[0]; + else if (time_before(jiffies, ati_remote->acc_jiffies + (HZ >> 2))) acc = accel[1]; + else if (time_before(jiffies, ati_remote->acc_jiffies + (HZ >> 1))) acc = accel[2]; + else if (time_before(jiffies, ati_remote->acc_jiffies + HZ)) acc = accel[3]; + else if (time_before(jiffies, ati_remote->acc_jiffies + HZ+(HZ>>1))) acc = accel[4]; + else if (time_before(jiffies, ati_remote->acc_jiffies + (HZ << 1))) acc = accel[5]; else acc = accel[6]; input_regs(dev, regs); diff --git a/drivers/usb/input/ati_remote2.c b/drivers/usb/input/ati_remote2.c new file mode 100644 index 00000000000..ab1a1ae24be --- /dev/null +++ b/drivers/usb/input/ati_remote2.c @@ -0,0 +1,477 @@ +/* + * ati_remote2 - ATI/Philips USB RF remote driver + * + * Copyright (C) 2005 Ville Syrjala <syrjala@sci.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + */ + +#include <linux/usb_input.h> + +#define DRIVER_DESC "ATI/Philips USB RF remote driver" +#define DRIVER_VERSION "0.1" + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_VERSION(DRIVER_VERSION); +MODULE_AUTHOR("Ville Syrjala <syrjala@sci.fi>"); +MODULE_LICENSE("GPL"); + +static unsigned int mode_mask = 0x1F; +module_param(mode_mask, uint, 0644); +MODULE_PARM_DESC(mode_mask, "Bitmask of modes to accept <4:PC><3:AUX4><2:AUX3><1:AUX2><0:AUX1>"); + +static struct usb_device_id ati_remote2_id_table[] = { + { USB_DEVICE(0x0471, 0x0602) }, /* ATI Remote Wonder II */ + { } +}; +MODULE_DEVICE_TABLE(usb, ati_remote2_id_table); + +static struct { + int hw_code; + int key_code; +} ati_remote2_key_table[] = { + { 0x00, KEY_0 }, + { 0x01, KEY_1 }, + { 0x02, KEY_2 }, + { 0x03, KEY_3 }, + { 0x04, KEY_4 }, + { 0x05, KEY_5 }, + { 0x06, KEY_6 }, + { 0x07, KEY_7 }, + { 0x08, KEY_8 }, + { 0x09, KEY_9 }, + { 0x0c, KEY_POWER }, + { 0x0d, KEY_MUTE }, + { 0x10, KEY_VOLUMEUP }, + { 0x11, KEY_VOLUMEDOWN }, + { 0x20, KEY_CHANNELUP }, + { 0x21, KEY_CHANNELDOWN }, + { 0x28, KEY_FORWARD }, + { 0x29, KEY_REWIND }, + { 0x2c, KEY_PLAY }, + { 0x30, KEY_PAUSE }, + { 0x31, KEY_STOP }, + { 0x37, KEY_RECORD }, + { 0x38, KEY_DVD }, + { 0x39, KEY_TV }, + { 0x54, KEY_MENU }, + { 0x58, KEY_UP }, + { 0x59, KEY_DOWN }, + { 0x5a, KEY_LEFT }, + { 0x5b, KEY_RIGHT }, + { 0x5c, KEY_OK }, + { 0x78, KEY_A }, + { 0x79, KEY_B }, + { 0x7a, KEY_C }, + { 0x7b, KEY_D }, + { 0x7c, KEY_E }, + { 0x7d, KEY_F }, + { 0x82, KEY_ENTER }, + { 0x8e, KEY_VENDOR }, + { 0x96, KEY_COFFEE }, + { 0xa9, BTN_LEFT }, + { 0xaa, BTN_RIGHT }, + { 0xbe, KEY_QUESTION }, + { 0xd5, KEY_FRONT }, + { 0xd0, KEY_EDIT }, + { 0xf9, KEY_INFO }, + { (0x00 << 8) | 0x3f, KEY_PROG1 }, + { (0x01 << 8) | 0x3f, KEY_PROG2 }, + { (0x02 << 8) | 0x3f, KEY_PROG3 }, + { (0x03 << 8) | 0x3f, KEY_PROG4 }, + { (0x04 << 8) | 0x3f, KEY_PC }, + { 0, KEY_RESERVED } +}; + +struct ati_remote2 { + struct input_dev *idev; + struct usb_device *udev; + + struct usb_interface *intf[2]; + struct usb_endpoint_descriptor *ep[2]; + struct urb *urb[2]; + void *buf[2]; + dma_addr_t buf_dma[2]; + + unsigned long jiffies; + int mode; + + char name[64]; + char phys[64]; +}; + +static int ati_remote2_probe(struct usb_interface *interface, const struct usb_device_id *id); +static void ati_remote2_disconnect(struct usb_interface *interface); + +static struct usb_driver ati_remote2_driver = { + .name = "ati_remote2", + .probe = ati_remote2_probe, + .disconnect = ati_remote2_disconnect, + .id_table = ati_remote2_id_table, +}; + +static int ati_remote2_open(struct input_dev *idev) +{ + struct ati_remote2 *ar2 = idev->private; + int r; + + r = usb_submit_urb(ar2->urb[0], GFP_KERNEL); + if (r) { + dev_err(&ar2->intf[0]->dev, + "%s: usb_submit_urb() = %d\n", __FUNCTION__, r); + return r; + } + r = usb_submit_urb(ar2->urb[1], GFP_KERNEL); + if (r) { + usb_kill_urb(ar2->urb[0]); + dev_err(&ar2->intf[1]->dev, + "%s: usb_submit_urb() = %d\n", __FUNCTION__, r); + return r; + } + + return 0; +} + +static void ati_remote2_close(struct input_dev *idev) +{ + struct ati_remote2 *ar2 = idev->private; + + usb_kill_urb(ar2->urb[0]); + usb_kill_urb(ar2->urb[1]); +} + +static void ati_remote2_input_mouse(struct ati_remote2 *ar2, struct pt_regs *regs) +{ + struct input_dev *idev = ar2->idev; + u8 *data = ar2->buf[0]; + + if (data[0] > 4) { + dev_err(&ar2->intf[0]->dev, + "Unknown mode byte (%02x %02x %02x %02x)\n", + data[3], data[2], data[1], data[0]); + return; + } + + if (!((1 << data[0]) & mode_mask)) + return; + + input_regs(idev, regs); + input_event(idev, EV_REL, REL_X, (s8) data[1]); + input_event(idev, EV_REL, REL_Y, (s8) data[2]); + input_sync(idev); +} + +static int ati_remote2_lookup(unsigned int hw_code) +{ + int i; + + for (i = 0; ati_remote2_key_table[i].key_code != KEY_RESERVED; i++) + if (ati_remote2_key_table[i].hw_code == hw_code) + return i; + + return -1; +} + +static void ati_remote2_input_key(struct ati_remote2 *ar2, struct pt_regs *regs) +{ + struct input_dev *idev = ar2->idev; + u8 *data = ar2->buf[1]; + int hw_code, index; + + if (data[0] > 4) { + dev_err(&ar2->intf[1]->dev, + "Unknown mode byte (%02x %02x %02x %02x)\n", + data[3], data[2], data[1], data[0]); + return; + } + + hw_code = data[2]; + /* + * Mode keys (AUX1-AUX4, PC) all generate the same code byte. + * Use the mode byte to figure out which one was pressed. + */ + if (hw_code == 0x3f) { + /* + * For some incomprehensible reason the mouse pad generates + * events which look identical to the events from the last + * pressed mode key. Naturally we don't want to generate key + * events for the mouse pad so we filter out any subsequent + * events from the same mode key. + */ + if (ar2->mode == data[0]) + return; + + if (data[1] == 0) + ar2->mode = data[0]; + + hw_code |= data[0] << 8; + } + + if (!((1 << data[0]) & mode_mask)) + return; + + index = ati_remote2_lookup(hw_code); + if (index < 0) { + dev_err(&ar2->intf[1]->dev, + "Unknown code byte (%02x %02x %02x %02x)\n", + data[3], data[2], data[1], data[0]); + return; + } + + switch (data[1]) { + case 0: /* release */ + break; + case 1: /* press */ + ar2->jiffies = jiffies + msecs_to_jiffies(idev->rep[REP_DELAY]); + break; + case 2: /* repeat */ + + /* No repeat for mouse buttons. */ + if (ati_remote2_key_table[index].key_code == BTN_LEFT || + ati_remote2_key_table[index].key_code == BTN_RIGHT) + return; + + if (!time_after_eq(jiffies, ar2->jiffies)) + return; + + ar2->jiffies = jiffies + msecs_to_jiffies(idev->rep[REP_PERIOD]); + break; + default: + dev_err(&ar2->intf[1]->dev, + "Unknown state byte (%02x %02x %02x %02x)\n", + data[3], data[2], data[1], data[0]); + return; + } + + input_regs(idev, regs); + input_event(idev, EV_KEY, ati_remote2_key_table[index].key_code, data[1]); + input_sync(idev); +} + +static void ati_remote2_complete_mouse(struct urb *urb, struct pt_regs *regs) +{ + struct ati_remote2 *ar2 = urb->context; + int r; + + switch (urb->status) { + case 0: + ati_remote2_input_mouse(ar2, regs); + break; + case -ENOENT: + case -EILSEQ: + case -ECONNRESET: + case -ESHUTDOWN: + dev_dbg(&ar2->intf[0]->dev, + "%s(): urb status = %d\n", __FUNCTION__, urb->status); + return; + default: + dev_err(&ar2->intf[0]->dev, + "%s(): urb status = %d\n", __FUNCTION__, urb->status); + } + + r = usb_submit_urb(urb, GFP_ATOMIC); + if (r) + dev_err(&ar2->intf[0]->dev, + "%s(): usb_submit_urb() = %d\n", __FUNCTION__, r); +} + +static void ati_remote2_complete_key(struct urb *urb, struct pt_regs *regs) +{ + struct ati_remote2 *ar2 = urb->context; + int r; + + switch (urb->status) { + case 0: + ati_remote2_input_key(ar2, regs); + break; + case -ENOENT: + case -EILSEQ: + case -ECONNRESET: + case -ESHUTDOWN: + dev_dbg(&ar2->intf[1]->dev, + "%s(): urb status = %d\n", __FUNCTION__, urb->status); + return; + default: + dev_err(&ar2->intf[1]->dev, + "%s(): urb status = %d\n", __FUNCTION__, urb->status); + } + + r = usb_submit_urb(urb, GFP_ATOMIC); + if (r) + dev_err(&ar2->intf[1]->dev, + "%s(): usb_submit_urb() = %d\n", __FUNCTION__, r); +} + +static int ati_remote2_input_init(struct ati_remote2 *ar2) +{ + struct input_dev *idev; + int i; + + idev = input_allocate_device(); + if (!idev) + return -ENOMEM; + + ar2->idev = idev; + idev->private = ar2; + + idev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP) | BIT(EV_REL); + idev->keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) | BIT(BTN_RIGHT); + idev->relbit[0] = BIT(REL_X) | BIT(REL_Y); + for (i = 0; ati_remote2_key_table[i].key_code != KEY_RESERVED; i++) + set_bit(ati_remote2_key_table[i].key_code, idev->keybit); + + idev->rep[REP_DELAY] = 250; + idev->rep[REP_PERIOD] = 33; + + idev->open = ati_remote2_open; + idev->close = ati_remote2_close; + + idev->name = ar2->name; + idev->phys = ar2->phys; + + usb_to_input_id(ar2->udev, &idev->id); + idev->cdev.dev = &ar2->udev->dev; + + i = input_register_device(idev); + if (i) + input_free_device(idev); + + return i; +} + +static int ati_remote2_urb_init(struct ati_remote2 *ar2) +{ + struct usb_device *udev = ar2->udev; + int i, pipe, maxp; + + for (i = 0; i < 2; i++) { + ar2->buf[i] = usb_buffer_alloc(udev, 4, GFP_KERNEL, &ar2->buf_dma[i]); + if (!ar2->buf[i]) + return -ENOMEM; + + ar2->urb[i] = usb_alloc_urb(0, GFP_KERNEL); + if (!ar2->urb[i]) + return -ENOMEM; + + pipe = usb_rcvintpipe(udev, ar2->ep[i]->bEndpointAddress); + maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe)); + maxp = maxp > 4 ? 4 : maxp; + + usb_fill_int_urb(ar2->urb[i], udev, pipe, ar2->buf[i], maxp, + i ? ati_remote2_complete_key : ati_remote2_complete_mouse, + ar2, ar2->ep[i]->bInterval); + ar2->urb[i]->transfer_dma = ar2->buf_dma[i]; + ar2->urb[i]->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + } + + return 0; +} + +static void ati_remote2_urb_cleanup(struct ati_remote2 *ar2) +{ + int i; + + for (i = 0; i < 2; i++) { + if (ar2->urb[i]) + usb_free_urb(ar2->urb[i]); + + if (ar2->buf[i]) + usb_buffer_free(ar2->udev, 4, ar2->buf[i], ar2->buf_dma[i]); + } +} + +static int ati_remote2_probe(struct usb_interface *interface, const struct usb_device_id *id) +{ + struct usb_device *udev = interface_to_usbdev(interface); + struct usb_host_interface *alt = interface->cur_altsetting; + struct ati_remote2 *ar2; + int r; + + if (alt->desc.bInterfaceNumber) + return -ENODEV; + + ar2 = kzalloc(sizeof (struct ati_remote2), GFP_KERNEL); + if (!ar2) + return -ENOMEM; + + ar2->udev = udev; + + ar2->intf[0] = interface; + ar2->ep[0] = &alt->endpoint[0].desc; + + ar2->intf[1] = usb_ifnum_to_if(udev, 1); + r = usb_driver_claim_interface(&ati_remote2_driver, ar2->intf[1], ar2); + if (r) + goto fail1; + alt = ar2->intf[1]->cur_altsetting; + ar2->ep[1] = &alt->endpoint[0].desc; + + r = ati_remote2_urb_init(ar2); + if (r) + goto fail2; + + usb_make_path(udev, ar2->phys, sizeof(ar2->phys)); + strlcat(ar2->phys, "/input0", sizeof(ar2->phys)); + + strlcat(ar2->name, "ATI Remote Wonder II", sizeof(ar2->name)); + + r = ati_remote2_input_init(ar2); + if (r) + goto fail2; + + usb_set_intfdata(interface, ar2); + + return 0; + + fail2: + ati_remote2_urb_cleanup(ar2); + + usb_driver_release_interface(&ati_remote2_driver, ar2->intf[1]); + fail1: + kfree(ar2); + + return r; +} + +static void ati_remote2_disconnect(struct usb_interface *interface) +{ + struct ati_remote2 *ar2; + struct usb_host_interface *alt = interface->cur_altsetting; + + if (alt->desc.bInterfaceNumber) + return; + + ar2 = usb_get_intfdata(interface); + usb_set_intfdata(interface, NULL); + + input_unregister_device(ar2->idev); + + ati_remote2_urb_cleanup(ar2); + + usb_driver_release_interface(&ati_remote2_driver, ar2->intf[1]); + + kfree(ar2); +} + +static int __init ati_remote2_init(void) +{ + int r; + + r = usb_register(&ati_remote2_driver); + if (r) + printk(KERN_ERR "ati_remote2: usb_register() = %d\n", r); + else + printk(KERN_INFO "ati_remote2: " DRIVER_DESC " " DRIVER_VERSION "\n"); + + return r; +} + +static void __exit ati_remote2_exit(void) +{ + usb_deregister(&ati_remote2_driver); +} + +module_init(ati_remote2_init); +module_exit(ati_remote2_exit); diff --git a/drivers/usb/input/fixp-arith.h b/drivers/usb/input/fixp-arith.h index 26ca5b890a6..b44d398de07 100644 --- a/drivers/usb/input/fixp-arith.h +++ b/drivers/usb/input/fixp-arith.h @@ -38,7 +38,7 @@ typedef s16 fixp_t; #define FRAC_MASK ((1<<FRAC_N)-1) // Not to be used directly. Use fixp_{cos,sin} -static fixp_t cos_table[45] = { +static const fixp_t cos_table[45] = { 0x0100, 0x00FF, 0x00FF, 0x00FE, 0x00FD, 0x00FC, 0x00FA, 0x00F8, 0x00F6, 0x00F3, 0x00F0, 0x00ED, 0x00E9, 0x00E6, 0x00E2, 0x00DD, 0x00D9, 0x00D4, 0x00CF, 0x00C9, 0x00C4, 0x00BE, 0x00B8, 0x00B1, diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c index a3e44ef1df4..a91e72c4141 100644 --- a/drivers/usb/input/hid-core.c +++ b/drivers/usb/input/hid-core.c @@ -1450,11 +1450,14 @@ void hid_init_reports(struct hid_device *hid) #define USB_VENDOR_ID_APPLE 0x05ac #define USB_DEVICE_ID_APPLE_POWERMOUSE 0x0304 +#define USB_VENDOR_ID_CHERRY 0x046a +#define USB_DEVICE_ID_CHERRY_CYMOTION 0x0023 + /* * Alphabetically sorted blacklist by quirk type. */ -static struct hid_blacklist { +static const struct hid_blacklist { __u16 idVendor; __u16 idProduct; unsigned quirks; @@ -1580,6 +1583,16 @@ static struct hid_blacklist { { USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_RUMBLEPAD, HID_QUIRK_BADPAD }, { USB_VENDOR_ID_TOPMAX, USB_DEVICE_ID_TOPMAX_COBRAPAD, HID_QUIRK_BADPAD }, + { USB_VENDOR_ID_CHERRY, USB_DEVICE_ID_CHERRY_CYMOTION, HID_QUIRK_CYMOTION }, + + { USB_VENDOR_ID_APPLE, 0x020E, HID_QUIRK_POWERBOOK_HAS_FN }, + { USB_VENDOR_ID_APPLE, 0x020F, HID_QUIRK_POWERBOOK_HAS_FN }, + { USB_VENDOR_ID_APPLE, 0x0214, HID_QUIRK_POWERBOOK_HAS_FN }, + { USB_VENDOR_ID_APPLE, 0x0215, HID_QUIRK_POWERBOOK_HAS_FN }, + { USB_VENDOR_ID_APPLE, 0x0216, HID_QUIRK_POWERBOOK_HAS_FN }, + { USB_VENDOR_ID_APPLE, 0x030A, HID_QUIRK_POWERBOOK_HAS_FN }, + { USB_VENDOR_ID_APPLE, 0x030B, HID_QUIRK_POWERBOOK_HAS_FN }, + { 0, 0 } }; @@ -1626,6 +1639,20 @@ static void hid_free_buffers(struct usb_device *dev, struct hid_device *hid) usb_buffer_free(dev, hid->bufsize, hid->ctrlbuf, hid->ctrlbuf_dma); } +/* + * Cherry Cymotion keyboard have an invalid HID report descriptor, + * that needs fixing before we can parse it. + */ + +static void hid_fixup_cymotion_descriptor(char *rdesc, int rsize) +{ + if (rsize >= 17 && rdesc[11] == 0x3c && rdesc[12] == 0x02) { + info("Fixing up Cherry Cymotion report descriptor"); + rdesc[11] = rdesc[16] = 0xff; + rdesc[12] = rdesc[17] = 0x03; + } +} + static struct hid_device *usb_hid_configure(struct usb_interface *intf) { struct usb_host_interface *interface = intf->cur_altsetting; @@ -1673,6 +1700,9 @@ static struct hid_device *usb_hid_configure(struct usb_interface *intf) return NULL; } + if ((quirks & HID_QUIRK_CYMOTION)) + hid_fixup_cymotion_descriptor(rdesc, rsize); + #ifdef DEBUG_DATA printk(KERN_DEBUG __FILE__ ": report descriptor (size %u, read %d) = ", rsize, n); for (n = 0; n < rsize; n++) @@ -1930,7 +1960,6 @@ static struct usb_device_id hid_usb_ids [] = { MODULE_DEVICE_TABLE (usb, hid_usb_ids); static struct usb_driver hid_driver = { - .owner = THIS_MODULE, .name = "usbhid", .probe = hid_probe, .disconnect = hid_disconnect, diff --git a/drivers/usb/input/hid-debug.h b/drivers/usb/input/hid-debug.h index ceebab99eff..702c48c2f81 100644 --- a/drivers/usb/input/hid-debug.h +++ b/drivers/usb/input/hid-debug.h @@ -681,6 +681,21 @@ static char *keys[KEY_MAX + 1] = { [KEY_SEND] = "Send", [KEY_REPLY] = "Reply", [KEY_FORWARDMAIL] = "ForwardMail", [KEY_SAVE] = "Save", [KEY_DOCUMENTS] = "Documents", + [KEY_FN] = "Fn", [KEY_FN_ESC] = "Fn+ESC", + [KEY_FN_1] = "Fn+1", [KEY_FN_2] = "Fn+2", + [KEY_FN_B] = "Fn+B", [KEY_FN_D] = "Fn+D", + [KEY_FN_E] = "Fn+E", [KEY_FN_F] = "Fn+F", + [KEY_FN_S] = "Fn+S", + [KEY_FN_F1] = "Fn+F1", [KEY_FN_F2] = "Fn+F2", + [KEY_FN_F3] = "Fn+F3", [KEY_FN_F4] = "Fn+F4", + [KEY_FN_F5] = "Fn+F5", [KEY_FN_F6] = "Fn+F6", + [KEY_FN_F7] = "Fn+F7", [KEY_FN_F8] = "Fn+F8", + [KEY_FN_F9] = "Fn+F9", [KEY_FN_F10] = "Fn+F10", + [KEY_FN_F11] = "Fn+F11", [KEY_FN_F12] = "Fn+F12", + [KEY_KBDILLUMTOGGLE] = "KbdIlluminationToggle", + [KEY_KBDILLUMDOWN] = "KbdIlluminationDown", + [KEY_KBDILLUMUP] = "KbdIlluminationUp", + [KEY_SWITCHVIDEOMODE] = "SwitchVideoMode", }; static char *relatives[REL_MAX + 1] = { diff --git a/drivers/usb/input/hid-input.c b/drivers/usb/input/hid-input.c index 1220a5004a5..cb0d80f4925 100644 --- a/drivers/usb/input/hid-input.c +++ b/drivers/usb/input/hid-input.c @@ -39,7 +39,7 @@ #define unk KEY_UNKNOWN -static unsigned char hid_keyboard[256] = { +static const unsigned char hid_keyboard[256] = { 0, 0, 0, 0, 30, 48, 46, 32, 18, 33, 34, 35, 23, 36, 37, 38, 50, 49, 24, 25, 16, 19, 31, 20, 22, 47, 17, 45, 21, 44, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 28, 1, 14, 15, 57, 12, 13, 26, @@ -58,7 +58,7 @@ static unsigned char hid_keyboard[256] = { 150,158,159,128,136,177,178,176,142,152,173,140,unk,unk,unk,unk }; -static struct { +static const struct { __s32 x; __s32 y; } hid_hat_to_axis[] = {{ 0, 0}, { 0,-1}, { 1,-1}, { 1, 0}, { 1, 1}, { 0, 1}, {-1, 1}, {-1, 0}, {-1,-1}}; @@ -73,6 +73,160 @@ static struct { #define map_key_clear(c) do { map_key(c); clear_bit(c, bit); } while (0) #define map_ff_effect(c) do { set_bit(c, input->ffbit); } while (0) +#ifdef CONFIG_USB_HIDINPUT_POWERBOOK + +struct hidinput_key_translation { + u16 from; + u16 to; + u8 flags; +}; + +#define POWERBOOK_FLAG_FKEY 0x01 + +static struct hidinput_key_translation powerbook_fn_keys[] = { + { KEY_BACKSPACE, KEY_DELETE }, + { KEY_F1, KEY_BRIGHTNESSDOWN, POWERBOOK_FLAG_FKEY }, + { KEY_F2, KEY_BRIGHTNESSUP, POWERBOOK_FLAG_FKEY }, + { KEY_F3, KEY_MUTE, POWERBOOK_FLAG_FKEY }, + { KEY_F4, KEY_VOLUMEDOWN, POWERBOOK_FLAG_FKEY }, + { KEY_F5, KEY_VOLUMEUP, POWERBOOK_FLAG_FKEY }, + { KEY_F6, KEY_NUMLOCK, POWERBOOK_FLAG_FKEY }, + { KEY_F7, KEY_SWITCHVIDEOMODE, POWERBOOK_FLAG_FKEY }, + { KEY_F8, KEY_KBDILLUMTOGGLE, POWERBOOK_FLAG_FKEY }, + { KEY_F9, KEY_KBDILLUMDOWN, POWERBOOK_FLAG_FKEY }, + { KEY_F10, KEY_KBDILLUMUP, POWERBOOK_FLAG_FKEY }, + { KEY_UP, KEY_PAGEUP }, + { KEY_DOWN, KEY_PAGEDOWN }, + { KEY_LEFT, KEY_HOME }, + { KEY_RIGHT, KEY_END }, + { } +}; + +static struct hidinput_key_translation powerbook_numlock_keys[] = { + { KEY_J, KEY_KP1 }, + { KEY_K, KEY_KP2 }, + { KEY_L, KEY_KP3 }, + { KEY_U, KEY_KP4 }, + { KEY_I, KEY_KP5 }, + { KEY_O, KEY_KP6 }, + { KEY_7, KEY_KP7 }, + { KEY_8, KEY_KP8 }, + { KEY_9, KEY_KP9 }, + { KEY_M, KEY_KP0 }, + { KEY_DOT, KEY_KPDOT }, + { KEY_SLASH, KEY_KPPLUS }, + { KEY_SEMICOLON, KEY_KPMINUS }, + { KEY_P, KEY_KPASTERISK }, + { KEY_MINUS, KEY_KPEQUAL }, + { KEY_0, KEY_KPSLASH }, + { KEY_F6, KEY_NUMLOCK }, + { KEY_KPENTER, KEY_KPENTER }, + { KEY_BACKSPACE, KEY_BACKSPACE }, + { } +}; + +static int usbhid_pb_fnmode = 1; +module_param_named(pb_fnmode, usbhid_pb_fnmode, int, 0644); +MODULE_PARM_DESC(pb_fnmode, + "Mode of fn key on PowerBooks (0 = disabled, 1 = fkeyslast, 2 = fkeysfirst)"); + +static struct hidinput_key_translation *find_translation(struct hidinput_key_translation *table, u16 from) +{ + struct hidinput_key_translation *trans; + + /* Look for the translation */ + for (trans = table; trans->from; trans++) + if (trans->from == from) + return trans; + + return NULL; +} + +static int hidinput_pb_event(struct hid_device *hid, struct input_dev *input, + struct hid_usage *usage, __s32 value) +{ + struct hidinput_key_translation *trans; + + if (usage->code == KEY_FN) { + if (value) hid->quirks |= HID_QUIRK_POWERBOOK_FN_ON; + else hid->quirks &= ~HID_QUIRK_POWERBOOK_FN_ON; + + input_event(input, usage->type, usage->code, value); + + return 1; + } + + if (usbhid_pb_fnmode) { + int do_translate; + + trans = find_translation(powerbook_fn_keys, usage->code); + if (trans) { + if (test_bit(usage->code, hid->pb_pressed_fn)) + do_translate = 1; + else if (trans->flags & POWERBOOK_FLAG_FKEY) + do_translate = + (usbhid_pb_fnmode == 2 && (hid->quirks & HID_QUIRK_POWERBOOK_FN_ON)) || + (usbhid_pb_fnmode == 1 && !(hid->quirks & HID_QUIRK_POWERBOOK_FN_ON)); + else + do_translate = (hid->quirks & HID_QUIRK_POWERBOOK_FN_ON); + + if (do_translate) { + if (value) + set_bit(usage->code, hid->pb_pressed_fn); + else + clear_bit(usage->code, hid->pb_pressed_fn); + + input_event(input, usage->type, trans->to, value); + + return 1; + } + } + + if (test_bit(usage->code, hid->pb_pressed_numlock) || + test_bit(LED_NUML, input->led)) { + trans = find_translation(powerbook_numlock_keys, usage->code); + + if (trans) { + if (value) + set_bit(usage->code, hid->pb_pressed_numlock); + else + clear_bit(usage->code, hid->pb_pressed_numlock); + + input_event(input, usage->type, trans->to, value); + } + + return 1; + } + } + + return 0; +} + +static void hidinput_pb_setup(struct input_dev *input) +{ + struct hidinput_key_translation *trans; + + set_bit(KEY_NUMLOCK, input->keybit); + + /* Enable all needed keys */ + for (trans = powerbook_fn_keys; trans->from; trans++) + set_bit(trans->to, input->keybit); + + for (trans = powerbook_numlock_keys; trans->from; trans++) + set_bit(trans->to, input->keybit); +} +#else +static inline int hidinput_pb_event(struct hid_device *hid, struct input_dev *input, + struct hid_usage *usage, __s32 value) +{ + return 0; +} + +static inline void hidinput_pb_setup(struct input_dev *input) +{ +} +#endif + static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_field *field, struct hid_usage *usage) { @@ -135,8 +289,11 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel case HID_UP_SIMULATION: switch (usage->hid & 0xffff) { - case 0xba: map_abs(ABS_RUDDER); break; + case 0xba: map_abs(ABS_RUDDER); break; case 0xbb: map_abs(ABS_THROTTLE); break; + case 0xc4: map_abs(ABS_GAS); break; + case 0xc5: map_abs(ABS_BRAKE); break; + case 0xc8: map_abs(ABS_WHEEL); break; default: goto ignore; } break; @@ -289,11 +446,19 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel case 0x226: map_key_clear(KEY_STOP); break; case 0x227: map_key_clear(KEY_REFRESH); break; case 0x22a: map_key_clear(KEY_BOOKMARKS); break; + case 0x233: map_key_clear(KEY_SCROLLUP); break; + case 0x234: map_key_clear(KEY_SCROLLDOWN); break; case 0x238: map_rel(REL_HWHEEL); break; case 0x279: map_key_clear(KEY_REDO); break; case 0x289: map_key_clear(KEY_REPLY); break; case 0x28b: map_key_clear(KEY_FORWARDMAIL); break; case 0x28c: map_key_clear(KEY_SEND); break; + + /* Reported on a Cherry Cymotion keyboard */ + case 0x301: map_key_clear(KEY_PROG1); break; + case 0x302: map_key_clear(KEY_PROG2); break; + case 0x303: map_key_clear(KEY_PROG3); break; + default: goto ignore; } break; @@ -325,7 +490,12 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel set_bit(EV_REP, input->evbit); switch(usage->hid & HID_USAGE) { - case 0x003: map_key_clear(KEY_FN); break; + case 0x003: + /* The fn key on Apple PowerBooks */ + map_key_clear(KEY_FN); + hidinput_pb_setup(input); + break; + default: goto ignore; } break; @@ -482,6 +652,9 @@ void hidinput_hid_event(struct hid_device *hid, struct hid_field *field, struct return; } + if ((hid->quirks & HID_QUIRK_POWERBOOK_HAS_FN) && hidinput_pb_event(hid, input, usage, value)) + return; + if (usage->hat_min < usage->hat_max || usage->hat_dir) { int hat_dir = usage->hat_dir; if (!hat_dir) @@ -524,7 +697,7 @@ void hidinput_hid_event(struct hid_device *hid, struct hid_field *field, struct return; } - if((usage->type == EV_KEY) && (usage->code == 0)) /* Key 0 is "unassigned", not KEY_UNKNOWN */ + if ((usage->type == EV_KEY) && (usage->code == 0)) /* Key 0 is "unassigned", not KEY_UNKNOWN */ return; input_event(input, usage->type, usage->code, value); diff --git a/drivers/usb/input/hid.h b/drivers/usb/input/hid.h index ee48a227610..8b0d4346ce9 100644 --- a/drivers/usb/input/hid.h +++ b/drivers/usb/input/hid.h @@ -235,17 +235,20 @@ struct hid_item { * HID device quirks. */ -#define HID_QUIRK_INVERT 0x001 -#define HID_QUIRK_NOTOUCH 0x002 -#define HID_QUIRK_IGNORE 0x004 -#define HID_QUIRK_NOGET 0x008 -#define HID_QUIRK_HIDDEV 0x010 -#define HID_QUIRK_BADPAD 0x020 -#define HID_QUIRK_MULTI_INPUT 0x040 -#define HID_QUIRK_2WHEEL_MOUSE_HACK_7 0x080 -#define HID_QUIRK_2WHEEL_MOUSE_HACK_5 0x100 -#define HID_QUIRK_2WHEEL_MOUSE_HACK_ON 0x200 -#define HID_QUIRK_2WHEEL_POWERMOUSE 0x400 +#define HID_QUIRK_INVERT 0x00000001 +#define HID_QUIRK_NOTOUCH 0x00000002 +#define HID_QUIRK_IGNORE 0x00000004 +#define HID_QUIRK_NOGET 0x00000008 +#define HID_QUIRK_HIDDEV 0x00000010 +#define HID_QUIRK_BADPAD 0x00000020 +#define HID_QUIRK_MULTI_INPUT 0x00000040 +#define HID_QUIRK_2WHEEL_MOUSE_HACK_7 0x00000080 +#define HID_QUIRK_2WHEEL_MOUSE_HACK_5 0x00000100 +#define HID_QUIRK_2WHEEL_MOUSE_HACK_ON 0x00000200 +#define HID_QUIRK_2WHEEL_POWERMOUSE 0x00000400 +#define HID_QUIRK_CYMOTION 0x00000800 +#define HID_QUIRK_POWERBOOK_HAS_FN 0x00001000 +#define HID_QUIRK_POWERBOOK_FN_ON 0x00002000 /* * This is the global environment of the parser. This information is @@ -431,6 +434,11 @@ struct hid_device { /* device report descriptor */ void (*ff_exit)(struct hid_device*); /* Called by hid_exit_ff(hid) */ int (*ff_event)(struct hid_device *hid, struct input_dev *input, unsigned int type, unsigned int code, int value); + +#ifdef CONFIG_USB_HIDINPUT_POWERBOOK + unsigned long pb_pressed_fn[NBITS(KEY_MAX)]; + unsigned long pb_pressed_numlock[NBITS(KEY_MAX)]; +#endif }; #define HID_GLOBAL_STACK_SIZE 4 diff --git a/drivers/usb/input/hiddev.c b/drivers/usb/input/hiddev.c index 440377c7a0d..4dff8473553 100644 --- a/drivers/usb/input/hiddev.c +++ b/drivers/usb/input/hiddev.c @@ -826,7 +826,6 @@ static int hiddev_usbd_probe(struct usb_interface *intf, static /* const */ struct usb_driver hiddev_driver = { - .owner = THIS_MODULE, .name = "hiddev", .probe = hiddev_usbd_probe, }; diff --git a/drivers/usb/input/itmtouch.c b/drivers/usb/input/itmtouch.c index 4a50acb39d2..7618ae5c104 100644 --- a/drivers/usb/input/itmtouch.c +++ b/drivers/usb/input/itmtouch.c @@ -250,7 +250,6 @@ static void itmtouch_disconnect(struct usb_interface *intf) MODULE_DEVICE_TABLE(usb, itmtouch_ids); static struct usb_driver itmtouch_driver = { - .owner = THIS_MODULE, .name = "itmtouch", .probe = itmtouch_probe, .disconnect = itmtouch_disconnect, diff --git a/drivers/usb/input/kbtab.c b/drivers/usb/input/kbtab.c index fd48e74e78e..f6d5cead542 100644 --- a/drivers/usb/input/kbtab.c +++ b/drivers/usb/input/kbtab.c @@ -197,7 +197,6 @@ static void kbtab_disconnect(struct usb_interface *intf) } static struct usb_driver kbtab_driver = { - .owner = THIS_MODULE, .name = "kbtab", .probe = kbtab_probe, .disconnect = kbtab_disconnect, diff --git a/drivers/usb/input/keyspan_remote.c b/drivers/usb/input/keyspan_remote.c index a32cfe51b77..b4a051b549d 100644 --- a/drivers/usb/input/keyspan_remote.c +++ b/drivers/usb/input/keyspan_remote.c @@ -95,7 +95,7 @@ struct usb_keyspan { * Currently there are 15 and 17 button models so RESERVED codes * are blank areas in the mapping. */ -static int keyspan_key_table[] = { +static const int keyspan_key_table[] = { KEY_RESERVED, /* 0 is just a place holder. */ KEY_RESERVED, KEY_STOP, @@ -559,7 +559,6 @@ static void keyspan_disconnect(struct usb_interface *interface) */ static struct usb_driver keyspan_driver = { - .owner = THIS_MODULE, .name = "keyspan_remote", .probe = keyspan_probe, .disconnect = keyspan_disconnect, diff --git a/drivers/usb/input/mtouchusb.c b/drivers/usb/input/mtouchusb.c index 52cc18cd247..f018953a548 100644 --- a/drivers/usb/input/mtouchusb.c +++ b/drivers/usb/input/mtouchusb.c @@ -310,7 +310,6 @@ static void mtouchusb_disconnect(struct usb_interface *intf) MODULE_DEVICE_TABLE(usb, mtouchusb_devices); static struct usb_driver mtouchusb_driver = { - .owner = THIS_MODULE, .name = "mtouchusb", .probe = mtouchusb_probe, .disconnect = mtouchusb_disconnect, diff --git a/drivers/usb/input/pid.c b/drivers/usb/input/pid.c index 19e015d171a..d9d9f656b8c 100644 --- a/drivers/usb/input/pid.c +++ b/drivers/usb/input/pid.c @@ -259,7 +259,7 @@ static int hid_pid_upload_effect(struct input_dev *dev, int hid_pid_init(struct hid_device *hid) { struct hid_ff_pid *private; - struct hid_input *hidinput = list_entry(&hid->inputs, struct hid_input, list); + struct hid_input *hidinput = list_entry(hid->inputs.next, struct hid_input, list); struct input_dev *input_dev = hidinput->input; private = hid->ff_private = kzalloc(sizeof(struct hid_ff_pid), GFP_KERNEL); diff --git a/drivers/usb/input/powermate.c b/drivers/usb/input/powermate.c index b7476233ef5..fdf0f788062 100644 --- a/drivers/usb/input/powermate.c +++ b/drivers/usb/input/powermate.c @@ -441,7 +441,6 @@ static struct usb_device_id powermate_devices [] = { MODULE_DEVICE_TABLE (usb, powermate_devices); static struct usb_driver powermate_driver = { - .owner = THIS_MODULE, .name = "powermate", .probe = powermate_probe, .disconnect = powermate_disconnect, diff --git a/drivers/usb/input/touchkitusb.c b/drivers/usb/input/touchkitusb.c index 7420c6b8428..3b3c7b4120a 100644 --- a/drivers/usb/input/touchkitusb.c +++ b/drivers/usb/input/touchkitusb.c @@ -1,7 +1,7 @@ /****************************************************************************** * touchkitusb.c -- Driver for eGalax TouchKit USB Touchscreens * - * Copyright (C) 2004 by Daniel Ritz + * Copyright (C) 2004-2005 by Daniel Ritz <daniel.ritz@gmx.ch> * Copyright (C) by Todd E. Johnson (mtouchusb.c) * * This program is free software; you can redistribute it and/or @@ -41,15 +41,13 @@ #define TOUCHKIT_MAX_YC 0x07ff #define TOUCHKIT_YC_FUZZ 0x0 #define TOUCHKIT_YC_FLAT 0x0 -#define TOUCHKIT_REPORT_DATA_SIZE 8 +#define TOUCHKIT_REPORT_DATA_SIZE 16 #define TOUCHKIT_DOWN 0x01 -#define TOUCHKIT_POINT_TOUCH 0x81 -#define TOUCHKIT_POINT_NOTOUCH 0x80 -#define TOUCHKIT_GET_TOUCHED(dat) ((((dat)[0]) & TOUCHKIT_DOWN) ? 1 : 0) -#define TOUCHKIT_GET_X(dat) (((dat)[3] << 7) | (dat)[4]) -#define TOUCHKIT_GET_Y(dat) (((dat)[1] << 7) | (dat)[2]) +#define TOUCHKIT_PKT_TYPE_MASK 0xFE +#define TOUCHKIT_PKT_TYPE_REPT 0x80 +#define TOUCHKIT_PKT_TYPE_DIAG 0x0A #define DRIVER_VERSION "v0.1" #define DRIVER_AUTHOR "Daniel Ritz <daniel.ritz@gmx.ch>" @@ -62,6 +60,8 @@ MODULE_PARM_DESC(swap_xy, "If set X and Y axes are swapped."); struct touchkit_usb { unsigned char *data; dma_addr_t data_dma; + char buffer[TOUCHKIT_REPORT_DATA_SIZE]; + int buf_len; struct urb *irq; struct usb_device *udev; struct input_dev *input; @@ -77,11 +77,128 @@ static struct usb_device_id touchkit_devices[] = { {} }; +/* helpers to read the data */ +static inline int touchkit_get_touched(char *data) +{ + return (data[0] & TOUCHKIT_DOWN) ? 1 : 0; +} + +static inline int touchkit_get_x(char *data) +{ + return ((data[3] & 0x0F) << 7) | (data[4] & 0x7F); +} + +static inline int touchkit_get_y(char *data) +{ + return ((data[1] & 0x0F) << 7) | (data[2] & 0x7F); +} + + +/* processes one input packet. */ +static void touchkit_process_pkt(struct touchkit_usb *touchkit, + struct pt_regs *regs, char *pkt) +{ + int x, y; + + /* only process report packets */ + if ((pkt[0] & TOUCHKIT_PKT_TYPE_MASK) != TOUCHKIT_PKT_TYPE_REPT) + return; + + if (swap_xy) { + y = touchkit_get_x(pkt); + x = touchkit_get_y(pkt); + } else { + x = touchkit_get_x(pkt); + y = touchkit_get_y(pkt); + } + + input_regs(touchkit->input, regs); + input_report_key(touchkit->input, BTN_TOUCH, touchkit_get_touched(pkt)); + input_report_abs(touchkit->input, ABS_X, x); + input_report_abs(touchkit->input, ABS_Y, y); + input_sync(touchkit->input); +} + + +static int touchkit_get_pkt_len(char *buf) +{ + switch (buf[0] & TOUCHKIT_PKT_TYPE_MASK) { + case TOUCHKIT_PKT_TYPE_REPT: + return 5; + + case TOUCHKIT_PKT_TYPE_DIAG: + return buf[1] + 2; + } + + return 0; +} + +static void touchkit_process(struct touchkit_usb *touchkit, int len, + struct pt_regs *regs) +{ + char *buffer; + int pkt_len, buf_len, pos; + + /* if the buffer contains data, append */ + if (unlikely(touchkit->buf_len)) { + int tmp; + + /* if only 1 byte in buffer, add another one to get length */ + if (touchkit->buf_len == 1) + touchkit->buffer[1] = touchkit->data[0]; + + pkt_len = touchkit_get_pkt_len(touchkit->buffer); + + /* unknown packet: drop everything */ + if (!pkt_len) + return; + + /* append, process */ + tmp = pkt_len - touchkit->buf_len; + memcpy(touchkit->buffer + touchkit->buf_len, touchkit->data, tmp); + touchkit_process_pkt(touchkit, regs, touchkit->buffer); + + buffer = touchkit->data + tmp; + buf_len = len - tmp; + } else { + buffer = touchkit->data; + buf_len = len; + } + + /* only one byte left in buffer */ + if (unlikely(buf_len == 1)) { + touchkit->buffer[0] = buffer[0]; + touchkit->buf_len = 1; + return; + } + + /* loop over the buffer */ + pos = 0; + while (pos < buf_len) { + /* get packet len */ + pkt_len = touchkit_get_pkt_len(buffer + pos); + + /* unknown packet: drop everything */ + if (unlikely(!pkt_len)) + return; + + /* full packet: process */ + if (likely(pkt_len <= buf_len)) { + touchkit_process_pkt(touchkit, regs, buffer + pos); + } else { + /* incomplete packet: save in buffer */ + memcpy(touchkit->buffer, buffer + pos, buf_len - pos); + touchkit->buf_len = buf_len - pos; + } + pos += pkt_len; + } +} + + static void touchkit_irq(struct urb *urb, struct pt_regs *regs) { struct touchkit_usb *touchkit = urb->context; int retval; - int x, y; switch (urb->status) { case 0: @@ -105,20 +222,7 @@ static void touchkit_irq(struct urb *urb, struct pt_regs *regs) goto exit; } - if (swap_xy) { - y = TOUCHKIT_GET_X(touchkit->data); - x = TOUCHKIT_GET_Y(touchkit->data); - } else { - x = TOUCHKIT_GET_X(touchkit->data); - y = TOUCHKIT_GET_Y(touchkit->data); - } - - input_regs(touchkit->input, regs); - input_report_key(touchkit->input, BTN_TOUCH, - TOUCHKIT_GET_TOUCHED(touchkit->data)); - input_report_abs(touchkit->input, ABS_X, x); - input_report_abs(touchkit->input, ABS_Y, y); - input_sync(touchkit->input); + touchkit_process(touchkit, urb->actual_length, regs); exit: retval = usb_submit_urb(urb, GFP_ATOMIC); @@ -267,7 +371,6 @@ static void touchkit_disconnect(struct usb_interface *intf) MODULE_DEVICE_TABLE(usb, touchkit_devices); static struct usb_driver touchkit_driver = { - .owner = THIS_MODULE, .name = "touchkitusb", .probe = touchkit_probe, .disconnect = touchkit_disconnect, diff --git a/drivers/usb/input/usbkbd.c b/drivers/usb/input/usbkbd.c index 226b6f90a90..2f3edc26cb5 100644 --- a/drivers/usb/input/usbkbd.c +++ b/drivers/usb/input/usbkbd.c @@ -345,7 +345,6 @@ static struct usb_device_id usb_kbd_id_table [] = { MODULE_DEVICE_TABLE (usb, usb_kbd_id_table); static struct usb_driver usb_kbd_driver = { - .owner = THIS_MODULE, .name = "usbkbd", .probe = usb_kbd_probe, .disconnect = usb_kbd_disconnect, diff --git a/drivers/usb/input/usbmouse.c b/drivers/usb/input/usbmouse.c index 230f6b1b314..af526135d21 100644 --- a/drivers/usb/input/usbmouse.c +++ b/drivers/usb/input/usbmouse.c @@ -226,7 +226,6 @@ static struct usb_device_id usb_mouse_id_table [] = { MODULE_DEVICE_TABLE (usb, usb_mouse_id_table); static struct usb_driver usb_mouse_driver = { - .owner = THIS_MODULE, .name = "usbmouse", .probe = usb_mouse_probe, .disconnect = usb_mouse_disconnect, diff --git a/drivers/usb/input/wacom.c b/drivers/usb/input/wacom.c index dc099bbe12b..d3e15df9e81 100644 --- a/drivers/usb/input/wacom.c +++ b/drivers/usb/input/wacom.c @@ -95,7 +95,7 @@ MODULE_LICENSE(DRIVER_LICENSE); enum { PENPARTNER = 0, GRAPHIRE, - G4, + WACOM_G4, PL, INTUOS, INTUOS3, @@ -373,7 +373,7 @@ static void wacom_graphire_irq(struct urb *urb, struct pt_regs *regs) case 2: /* Mouse with wheel */ input_report_key(dev, BTN_MIDDLE, data[1] & 0x04); - if (wacom->features->type == G4) { + if (wacom->features->type == WACOM_G4) { rw = data[7] & 0x04 ? -(data[7] & 0x03) : (data[7] & 0x03); input_report_rel(dev, REL_WHEEL, rw); } else @@ -385,7 +385,7 @@ static void wacom_graphire_irq(struct urb *urb, struct pt_regs *regs) id = CURSOR_DEVICE_ID; input_report_key(dev, BTN_LEFT, data[1] & 0x01); input_report_key(dev, BTN_RIGHT, data[1] & 0x02); - if (wacom->features->type == G4) + if (wacom->features->type == WACOM_G4) input_report_abs(dev, ABS_DISTANCE, data[6]); else input_report_abs(dev, ABS_DISTANCE, data[7]); @@ -410,7 +410,7 @@ static void wacom_graphire_irq(struct urb *urb, struct pt_regs *regs) input_sync(dev); /* send pad data */ - if (wacom->features->type == G4) { + if (wacom->features->type == WACOM_G4) { /* fist time sending pad data */ if (wacom->tool[1] != BTN_TOOL_FINGER) { wacom->id[1] = 0; @@ -713,8 +713,8 @@ static struct wacom_features wacom_features[] = { { "Wacom Graphire2 5x7", 8, 13918, 10206, 511, 32, GRAPHIRE, wacom_graphire_irq }, { "Wacom Graphire3", 8, 10208, 7424, 511, 32, GRAPHIRE, wacom_graphire_irq }, { "Wacom Graphire3 6x8", 8, 16704, 12064, 511, 32, GRAPHIRE, wacom_graphire_irq }, - { "Wacom Graphire4 4x5", 8, 10208, 7424, 511, 32, G4, wacom_graphire_irq }, - { "Wacom Graphire4 6x8", 8, 16704, 12064, 511, 32, G4, wacom_graphire_irq }, + { "Wacom Graphire4 4x5", 8, 10208, 7424, 511, 32, WACOM_G4, wacom_graphire_irq }, + { "Wacom Graphire4 6x8", 8, 16704, 12064, 511, 32, WACOM_G4, wacom_graphire_irq }, { "Wacom Volito", 8, 5104, 3712, 511, 32, GRAPHIRE, wacom_graphire_irq }, { "Wacom PenStation2", 8, 3250, 2320, 255, 32, GRAPHIRE, wacom_graphire_irq }, { "Wacom Volito2 4x5", 8, 5104, 3712, 511, 32, GRAPHIRE, wacom_graphire_irq }, @@ -859,7 +859,7 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i input_set_abs_params(input_dev, ABS_PRESSURE, 0, wacom->features->pressure_max, 0, 0); switch (wacom->features->type) { - case G4: + case WACOM_G4: input_dev->evbit[0] |= BIT(EV_MSC); input_dev->mscbit[0] |= BIT(MSC_SERIAL); input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_FINGER); @@ -945,7 +945,6 @@ static void wacom_disconnect(struct usb_interface *intf) } static struct usb_driver wacom_driver = { - .owner = THIS_MODULE, .name = "wacom", .probe = wacom_probe, .disconnect = wacom_disconnect, diff --git a/drivers/usb/input/xpad.c b/drivers/usb/input/xpad.c index 43112f040b6..e278489a80c 100644 --- a/drivers/usb/input/xpad.c +++ b/drivers/usb/input/xpad.c @@ -70,7 +70,7 @@ #define XPAD_PKT_LEN 32 -static struct xpad_device { +static const struct xpad_device { u16 idVendor; u16 idProduct; char *name; @@ -81,13 +81,13 @@ static struct xpad_device { { 0x0000, 0x0000, "X-Box pad" } }; -static signed short xpad_btn[] = { +static const signed short xpad_btn[] = { BTN_A, BTN_B, BTN_C, BTN_X, BTN_Y, BTN_Z, /* "analog" buttons */ BTN_START, BTN_BACK, BTN_THUMBL, BTN_THUMBR, /* start/back/sticks */ -1 /* terminating entry */ }; -static signed short xpad_abs[] = { +static const signed short xpad_abs[] = { ABS_X, ABS_Y, /* left stick */ ABS_RX, ABS_RY, /* right stick */ ABS_Z, ABS_RZ, /* triggers left/right */ @@ -316,7 +316,6 @@ static void xpad_disconnect(struct usb_interface *intf) } static struct usb_driver xpad_driver = { - .owner = THIS_MODULE, .name = "xpad", .probe = xpad_probe, .disconnect = xpad_disconnect, diff --git a/drivers/usb/input/yealink.c b/drivers/usb/input/yealink.c index f526aebea50..1bfc105ad4d 100644 --- a/drivers/usb/input/yealink.c +++ b/drivers/usb/input/yealink.c @@ -987,7 +987,6 @@ static int usb_probe(struct usb_interface *intf, const struct usb_device_id *id) } static struct usb_driver yealink_driver = { - .owner = THIS_MODULE, .name = "yealink", .probe = usb_probe, .disconnect = usb_disconnect, |