diff options
Diffstat (limited to 'drivers/usb/misc/auerswald.c')
| -rw-r--r-- | drivers/usb/misc/auerswald.c | 2152 |
1 files changed, 0 insertions, 2152 deletions
diff --git a/drivers/usb/misc/auerswald.c b/drivers/usb/misc/auerswald.c deleted file mode 100644 index d2f61d5510e..00000000000 --- a/drivers/usb/misc/auerswald.c +++ /dev/null @@ -1,2152 +0,0 @@ -/*****************************************************************************/ -/* - * auerswald.c -- Auerswald PBX/System Telephone usb driver. - * - * Copyright (C) 2001 Wolfgang Mües (wolfgang@iksw-muees.de) - * - * Very much code of this driver is borrowed from dabusb.c (Deti Fliegl) - * and from the USB Skeleton driver (Greg Kroah-Hartman). Thank you. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - /*****************************************************************************/ - -/* Standard Linux module include files */ -#include <asm/uaccess.h> -#include <asm/byteorder.h> -#include <linux/slab.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/wait.h> -#include <linux/usb.h> -#include <linux/mutex.h> - -/*-------------------------------------------------------------------*/ -/* Debug support */ -#ifdef DEBUG -#define dump( adr, len) \ -do { \ - unsigned int u; \ - printk (KERN_DEBUG); \ - for (u = 0; u < len; u++) \ - printk (" %02X", adr[u] & 0xFF); \ - printk ("\n"); \ -} while (0) -#else -#define dump( adr, len) -#endif - -/*-------------------------------------------------------------------*/ -/* Version Information */ -#define DRIVER_VERSION "0.9.11" -#define DRIVER_AUTHOR "Wolfgang Mües <wolfgang@iksw-muees.de>" -#define DRIVER_DESC "Auerswald PBX/System Telephone usb driver" - -/*-------------------------------------------------------------------*/ -/* Private declarations for Auerswald USB driver */ - -/* Auerswald Vendor ID */ -#define ID_AUERSWALD 0x09BF - -#define AUER_MINOR_BASE 112 /* auerswald driver minor number */ - -/* we can have up to this number of device plugged in at once */ -#define AUER_MAX_DEVICES 16 - - -/* Number of read buffers for each device */ -#define AU_RBUFFERS 10 - -/* Number of chain elements for each control chain */ -#define AUCH_ELEMENTS 20 - -/* Number of retries in communication */ -#define AU_RETRIES 10 - -/*-------------------------------------------------------------------*/ -/* vendor specific protocol */ -/* Header Byte */ -#define AUH_INDIRMASK 0x80 /* mask for direct/indirect bit */ -#define AUH_DIRECT 0x00 /* data is for USB device */ -#define AUH_INDIRECT 0x80 /* USB device is relay */ - -#define AUH_SPLITMASK 0x40 /* mask for split bit */ -#define AUH_UNSPLIT 0x00 /* data block is full-size */ -#define AUH_SPLIT 0x40 /* data block is part of a larger one, - split-byte follows */ - -#define AUH_TYPEMASK 0x3F /* mask for type of data transfer */ -#define AUH_TYPESIZE 0x40 /* different types */ -#define AUH_DCHANNEL 0x00 /* D channel data */ -#define AUH_B1CHANNEL 0x01 /* B1 channel transparent */ -#define AUH_B2CHANNEL 0x02 /* B2 channel transparent */ -/* 0x03..0x0F reserved for driver internal use */ -#define AUH_COMMAND 0x10 /* Command channel */ -#define AUH_BPROT 0x11 /* Configuration block protocol */ -#define AUH_DPROTANA 0x12 /* D channel protocol analyzer */ -#define AUH_TAPI 0x13 /* telephone api data (ATD) */ -/* 0x14..0x3F reserved for other protocols */ -#define AUH_UNASSIGNED 0xFF /* if char device has no assigned service */ -#define AUH_FIRSTUSERCH 0x11 /* first channel which is available for driver users */ - -#define AUH_SIZE 1 /* Size of Header Byte */ - -/* Split Byte. Only present if split bit in header byte set.*/ -#define AUS_STARTMASK 0x80 /* mask for first block of splitted frame */ -#define AUS_FIRST 0x80 /* first block */ -#define AUS_FOLLOW 0x00 /* following block */ - -#define AUS_ENDMASK 0x40 /* mask for last block of splitted frame */ -#define AUS_END 0x40 /* last block */ -#define AUS_NOEND 0x00 /* not the last block */ - -#define AUS_LENMASK 0x3F /* mask for block length information */ - -/* Request types */ -#define AUT_RREQ (USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_OTHER) /* Read Request */ -#define AUT_WREQ (USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER) /* Write Request */ - -/* Vendor Requests */ -#define AUV_GETINFO 0x00 /* GetDeviceInfo */ -#define AUV_WBLOCK 0x01 /* Write Block */ -#define AUV_RBLOCK 0x02 /* Read Block */ -#define AUV_CHANNELCTL 0x03 /* Channel Control */ -#define AUV_DUMMY 0x04 /* Dummy Out for retry */ - -/* Device Info Types */ -#define AUDI_NUMBCH 0x0000 /* Number of supported B channels */ -#define AUDI_OUTFSIZE 0x0001 /* Size of OUT B channel fifos */ -#define AUDI_MBCTRANS 0x0002 /* max. Blocklength of control transfer */ - -/* Interrupt endpoint definitions */ -#define AU_IRQENDP 1 /* Endpoint number */ -#define AU_IRQCMDID 16 /* Command-block ID */ -#define AU_BLOCKRDY 0 /* Command: Block data ready on ctl endpoint */ -#define AU_IRQMINSIZE 5 /* Nr. of bytes decoded in this driver */ - -/* Device String Descriptors */ -#define AUSI_VENDOR 1 /* "Auerswald GmbH & Co. KG" */ -#define AUSI_DEVICE 2 /* Name of the Device */ -#define AUSI_SERIALNR 3 /* Serial Number */ -#define AUSI_MSN 4 /* "MSN ..." (first) Multiple Subscriber Number */ - -#define AUSI_DLEN 100 /* Max. Length of Device Description */ - -#define AUV_RETRY 0x101 /* First Firmware version which can do control retries */ - -/*-------------------------------------------------------------------*/ -/* External data structures / Interface */ -typedef struct -{ - char __user *buf; /* return buffer for string contents */ - unsigned int bsize; /* size of return buffer */ -} audevinfo_t,*paudevinfo_t; - -/* IO controls */ -#define IOCTL_AU_SLEN _IOR( 'U', 0xF0, int) /* return the max. string descriptor length */ -#define IOCTL_AU_DEVINFO _IOWR('U', 0xF1, audevinfo_t) /* get name of a specific device */ -#define IOCTL_AU_SERVREQ _IOW( 'U', 0xF2, int) /* request a service channel */ -#define IOCTL_AU_BUFLEN _IOR( 'U', 0xF3, int) /* return the max. buffer length for the device */ -#define IOCTL_AU_RXAVAIL _IOR( 'U', 0xF4, int) /* return != 0 if Receive Data available */ -#define IOCTL_AU_CONNECT _IOR( 'U', 0xF5, int) /* return != 0 if connected to a service channel */ -#define IOCTL_AU_TXREADY _IOR( 'U', 0xF6, int) /* return != 0 if Transmitt channel ready to send */ -/* 'U' 0xF7..0xFF reseved */ - -/*-------------------------------------------------------------------*/ -/* Internal data structures */ - -/* ..................................................................*/ -/* urb chain element */ -struct auerchain; /* forward for circular reference */ -typedef struct -{ - struct auerchain *chain; /* pointer to the chain to which this element belongs */ - struct urb * urbp; /* pointer to attached urb */ - void *context; /* saved URB context */ - usb_complete_t complete; /* saved URB completion function */ - struct list_head list; /* to include element into a list */ -} auerchainelement_t,*pauerchainelement_t; - -/* urb chain */ -typedef struct auerchain -{ - pauerchainelement_t active; /* element which is submitted to urb */ - spinlock_t lock; /* protection agains interrupts */ - struct list_head waiting_list; /* list of waiting elements */ - struct list_head free_list; /* list of available elements */ -} auerchain_t,*pauerchain_t; - -/* urb blocking completion helper struct */ -typedef struct -{ - wait_queue_head_t wqh; /* wait for completion */ - unsigned int done; /* completion flag */ -} auerchain_chs_t,*pauerchain_chs_t; - -/* ...................................................................*/ -/* buffer element */ -struct auerbufctl; /* forward */ -typedef struct -{ - char *bufp; /* reference to allocated data buffer */ - unsigned int len; /* number of characters in data buffer */ - unsigned int retries; /* for urb retries */ - struct usb_ctrlrequest *dr; /* for setup data in control messages */ - struct urb * urbp; /* USB urb */ - struct auerbufctl *list; /* pointer to list */ - struct list_head buff_list; /* reference to next buffer in list */ -} auerbuf_t,*pauerbuf_t; - -/* buffer list control block */ -typedef struct auerbufctl -{ - spinlock_t lock; /* protection in interrupt */ - struct list_head free_buff_list;/* free buffers */ - struct list_head rec_buff_list; /* buffers with receive data */ -} auerbufctl_t,*pauerbufctl_t; - -/* ...................................................................*/ -/* service context */ -struct auerscon; /* forward */ -typedef void (*auer_dispatch_t)(struct auerscon*, pauerbuf_t); -typedef void (*auer_disconn_t) (struct auerscon*); -typedef struct auerscon -{ - unsigned int id; /* protocol service id AUH_xxxx */ - auer_dispatch_t dispatch; /* dispatch read buffer */ - auer_disconn_t disconnect; /* disconnect from device, wake up all char readers */ -} auerscon_t,*pauerscon_t; - -/* ...................................................................*/ -/* USB device context */ -typedef struct -{ - struct mutex mutex; /* protection in user context */ - char name[20]; /* name of the /dev/usb entry */ - unsigned int dtindex; /* index in the device table */ - struct usb_device * usbdev; /* USB device handle */ - int open_count; /* count the number of open character channels */ - char dev_desc[AUSI_DLEN];/* for storing a textual description */ - unsigned int maxControlLength; /* max. Length of control paket (without header) */ - struct urb * inturbp; /* interrupt urb */ - char * intbufp; /* data buffer for interrupt urb */ - unsigned int irqsize; /* size of interrupt endpoint 1 */ - struct auerchain controlchain; /* for chaining of control messages */ - auerbufctl_t bufctl; /* Buffer control for control transfers */ - pauerscon_t services[AUH_TYPESIZE];/* context pointers for each service */ - unsigned int version; /* Version of the device */ - wait_queue_head_t bufferwait; /* wait for a control buffer */ -} auerswald_t,*pauerswald_t; - -/* ................................................................... */ -/* character device context */ -typedef struct -{ - struct mutex mutex; /* protection in user context */ - pauerswald_t auerdev; /* context pointer of assigned device */ - auerbufctl_t bufctl; /* controls the buffer chain */ - auerscon_t scontext; /* service context */ - wait_queue_head_t readwait; /* for synchronous reading */ - struct mutex readmutex; /* protection against multiple reads */ - pauerbuf_t readbuf; /* buffer held for partial reading */ - unsigned int readoffset; /* current offset in readbuf */ - unsigned int removed; /* is != 0 if device is removed */ -} auerchar_t,*pauerchar_t; - - -/*-------------------------------------------------------------------*/ -/* Forwards */ -static void auerswald_ctrlread_complete (struct urb * urb); -static void auerswald_removeservice (pauerswald_t cp, pauerscon_t scp); -static struct usb_driver auerswald_driver; - - -/*-------------------------------------------------------------------*/ -/* USB chain helper functions */ -/* -------------------------- */ - -/* completion function for chained urbs */ -static void auerchain_complete (struct urb * urb) -{ - unsigned long flags; - int result; - - /* get pointer to element and to chain */ - pauerchainelement_t acep = urb->context; - pauerchain_t acp = acep->chain; - - /* restore original entries in urb */ - urb->context = acep->context; - urb->complete = acep->complete; - - dbg ("auerchain_complete called"); - - /* call original completion function - NOTE: this function may lead to more urbs submitted into the chain. - (no chain lock at calling complete()!) - acp->active != NULL is protecting us against recursion.*/ - urb->complete (urb); - - /* detach element from chain data structure */ - spin_lock_irqsave (&acp->lock, flags); - if (acp->active != acep) /* paranoia debug check */ - dbg ("auerchain_complete: completion on non-active element called!"); - else - acp->active = NULL; - - /* add the used chain element to the list of free elements */ - list_add_tail (&acep->list, &acp->free_list); - acep = NULL; - - /* is there a new element waiting in the chain? */ - if (!acp->active && !list_empty (&acp->waiting_list)) { - /* yes: get the entry */ - struct list_head *tmp = acp->waiting_list.next; - list_del (tmp); - acep = list_entry (tmp, auerchainelement_t, list); - acp->active = acep; - } - spin_unlock_irqrestore (&acp->lock, flags); - - /* submit the new urb */ - if (acep) { - urb = acep->urbp; - dbg ("auerchain_complete: submitting next urb from chain"); - urb->status = 0; /* needed! */ - result = usb_submit_urb(urb, GFP_ATOMIC); - - /* check for submit errors */ - if (result) { - urb->status = result; - dbg("auerchain_complete: usb_submit_urb with error code %d", result); - /* and do error handling via *this* completion function (recursive) */ - auerchain_complete( urb); - } - } else { - /* simple return without submitting a new urb. - The empty chain is detected with acp->active == NULL. */ - }; -} - - -/* submit function for chained urbs - this function may be called from completion context or from user space! - early = 1 -> submit in front of chain -*/ -static int auerchain_submit_urb_list (pauerchain_t acp, struct urb * urb, int early) -{ - int result; - unsigned long flags; - pauerchainelement_t acep = NULL; - - dbg ("auerchain_submit_urb called"); - - /* try to get a chain element */ - spin_lock_irqsave (&acp->lock, flags); - if (!list_empty (&acp->free_list)) { - /* yes: get the entry */ - struct list_head *tmp = acp->free_list.next; - list_del (tmp); - acep = list_entry (tmp, auerchainelement_t, list); - } - spin_unlock_irqrestore (&acp->lock, flags); - - /* if no chain element available: return with error */ - if (!acep) { - return -ENOMEM; - } - - /* fill in the new chain element values */ - acep->chain = acp; - acep->context = urb->context; - acep->complete = urb->complete; - acep->urbp = urb; - INIT_LIST_HEAD (&acep->list); - - /* modify urb */ - urb->context = acep; - urb->complete = auerchain_complete; - urb->status = -EINPROGRESS; /* usb_submit_urb does this, too */ - - /* add element to chain - or start it immediately */ - spin_lock_irqsave (&acp->lock, flags); - if (acp->active) { - /* there is traffic in the chain, simple add element to chain */ - if (early) { - dbg ("adding new urb to head of chain"); - list_add (&acep->list, &acp->waiting_list); - } else { - dbg ("adding new urb to end of chain"); - list_add_tail (&acep->list, &acp->waiting_list); - } - acep = NULL; - } else { - /* the chain is empty. Prepare restart */ - acp->active = acep; - } - /* Spin has to be removed before usb_submit_urb! */ - spin_unlock_irqrestore (&acp->lock, flags); - - /* Submit urb if immediate restart */ - if (acep) { - dbg("submitting urb immediate"); - urb->status = 0; /* needed! */ - result = usb_submit_urb(urb, GFP_ATOMIC); - /* check for submit errors */ - if (result) { - urb->status = result; - dbg("auerchain_submit_urb: usb_submit_urb with error code %d", result); - /* and do error handling via completion function */ - auerchain_complete( urb); - } - } - - return 0; -} - -/* submit function for chained urbs - this function may be called from completion context or from user space! -*/ -static int auerchain_submit_urb (pauerchain_t acp, struct urb * urb) -{ - return auerchain_submit_urb_list (acp, urb, 0); -} - -/* cancel an urb which is submitted to the chain - the result is 0 if the urb is cancelled, or -EINPROGRESS if - the function is successfully started. -*/ -static int auerchain_unlink_urb (pauerchain_t acp, struct urb * urb) -{ - unsigned long flags; - struct urb * urbp; - pauerchainelement_t acep; - struct list_head *tmp; - - dbg ("auerchain_unlink_urb called"); - - /* search the chain of waiting elements */ - spin_lock_irqsave (&acp->lock, flags); - list_for_each (tmp, &acp->waiting_list) { - acep = list_entry (tmp, auerchainelement_t, list); - if (acep->urbp == urb) { - list_del (tmp); - urb->context = acep->context; - urb->complete = acep->complete; - list_add_tail (&acep->list, &acp->free_list); - spin_unlock_irqrestore (&acp->lock, flags); - dbg ("unlink waiting urb"); - urb->status = -ENOENT; - urb->complete (urb); - return 0; - } - } - /* not found. */ - spin_unlock_irqrestore (&acp->lock, flags); - - /* get the active urb */ - acep = acp->active; - if (acep) { - urbp = acep->urbp; - - /* check if we have to cancel the active urb */ - if (urbp == urb) { - /* note that there is a race condition between the check above - and the unlink() call because of no lock. This race is harmless, - because the usb module will detect the unlink() after completion. - We can't use the acp->lock here because the completion function - wants to grab it. - */ - dbg ("unlink active urb"); - return usb_unlink_urb (urbp); - } - } - - /* not found anyway - ... is some kind of success - */ - dbg ("urb to unlink not found in chain"); - return 0; -} - -/* cancel all urbs which are in the chain. - this function must not be called from interrupt or completion handler. -*/ -static void auerchain_unlink_all (pauerchain_t acp) -{ - unsigned long flags; - struct urb * urbp; - pauerchainelement_t acep; - - dbg ("auerchain_unlink_all called"); - - /* clear the chain of waiting elements */ - spin_lock_irqsave (&acp->lock, flags); - while (!list_empty (&acp->waiting_list)) { - /* get the next entry */ - struct list_head *tmp = acp->waiting_list.next; - list_del (tmp); - acep = list_entry (tmp, auerchainelement_t, list); - urbp = acep->urbp; - urbp->context = acep->context; - urbp->complete = acep->complete; - list_add_tail (&acep->list, &acp->free_list); - spin_unlock_irqrestore (&acp->lock, flags); - dbg ("unlink waiting urb"); - urbp->status = -ENOENT; - urbp->complete (urbp); - spin_lock_irqsave (&acp->lock, flags); - } - spin_unlock_irqrestore (&acp->lock, flags); - - /* clear the active urb */ - acep = acp->active; - if (acep) { - urbp = acep->urbp; - dbg ("unlink active urb"); - usb_kill_urb (urbp); - } -} - - -/* free the chain. - this function must not be called from interrupt or completion handler. -*/ -static void auerchain_free (pauerchain_t acp) -{ - unsigned long flags; - pauerchainelement_t acep; - - dbg ("auerchain_free called"); - - /* first, cancel all pending urbs */ - auerchain_unlink_all (acp); - - /* free the elements */ - spin_lock_irqsave (&acp->lock, flags); - while (!list_empty (&acp->free_list)) { - /* get the next entry */ - struct list_head *tmp = acp->free_list.next; - list_del (tmp); - spin_unlock_irqrestore (&acp->lock, flags); - acep = list_entry (tmp, auerchainelement_t, list); - kfree (acep); - spin_lock_irqsave (&acp->lock, flags); - } - spin_unlock_irqrestore (&acp->lock, flags); -} - - -/* Init the chain control structure */ -static void auerchain_init (pauerchain_t acp) -{ - /* init the chain data structure */ - acp->active = NULL; - spin_lock_init (&acp->lock); - INIT_LIST_HEAD (&acp->waiting_list); - INIT_LIST_HEAD (&acp->free_list); -} - -/* setup a chain. - It is assumed that there is no concurrency while setting up the chain - requirement: auerchain_init() -*/ -static int auerchain_setup (pauerchain_t acp, unsigned int numElements) -{ - pauerchainelement_t acep; - - dbg ("auerchain_setup called with %d elements", numElements); - - /* fill the list of free elements */ - for (;numElements; numElements--) { - acep = kzalloc(sizeof(auerchainelement_t), GFP_KERNEL); - if (!acep) - goto ac_fail; - INIT_LIST_HEAD (&acep->list); - list_add_tail (&acep->list, &acp->free_list); - } - return 0; - -ac_fail:/* free the elements */ - while (!list_empty (&acp->free_list)) { - /* get the next entry */ - struct list_head *tmp = acp->free_list.next; - list_del (tmp); - acep = list_entry (tmp, auerchainelement_t, list); - kfree (acep); - } - return -ENOMEM; -} - - -/* completion handler for synchronous chained URBs */ -static void auerchain_blocking_completion (struct urb *urb) -{ - pauerchain_chs_t pchs = urb->context; - pchs->done = 1; - wmb(); - wake_up (&pchs->wqh); -} - - -/* Starts chained urb and waits for completion or timeout */ -static int auerchain_start_wait_urb (pauerchain_t acp, struct urb *urb, int timeout, int* actual_length) -{ - auerchain_chs_t chs; - int status; - - dbg ("auerchain_start_wait_urb called"); - init_waitqueue_head (&chs.wqh); - chs.done = 0; - - urb->context = &chs; - status = auerchain_submit_urb (acp, urb); - if (status) - /* something went wrong */ - return status; - - timeout = wait_event_timeout(chs.wqh, chs.done, timeout); - - if (!timeout && !chs.done) { - if (urb->status != -EINPROGRESS) { /* No callback?!! */ - dbg ("auerchain_start_wait_urb: raced timeout"); - status = urb->status; - } else { - dbg ("auerchain_start_wait_urb: timeout"); - auerchain_unlink_urb (acp, urb); /* remove urb safely */ - status = -ETIMEDOUT; - } - } else - status = urb->status; - - if (status >= 0) - *actual_length = urb->actual_length; - - return status; -} - - -/* auerchain_control_msg - Builds a control urb, sends it off and waits for completion - acp: pointer to the auerchain - dev: pointer to the usb device to send the message to - pipe: endpoint "pipe" to send the message to - request: USB message request value - requesttype: USB message request type value - value: USB message value - index: USB message index value - data: pointer to the data to send - size: length in bytes of the data to send - timeout: time to wait for the message to complete before timing out (if 0 the wait is forever) - - This function sends a simple control message to a specified endpoint - and waits for the message to complete, or timeout. - - If successful, it returns the transferred length, otherwise a negative error number. - - Don't use this function from within an interrupt context, like a - bottom half handler. If you need an asynchronous message, or need to send - a message from within interrupt context, use auerchain_submit_urb() -*/ -static int auerchain_control_msg (pauerchain_t acp, struct usb_device *dev, unsigned int pipe, __u8 request, __u8 requesttype, - __u16 value, __u16 index, void *data, __u16 size, int timeout) -{ - int ret; - struct usb_ctrlrequest *dr; - struct urb *urb; - int uninitialized_var(length); - - dbg ("auerchain_control_msg"); - dr = kmalloc (sizeof (struct usb_ctrlrequest), GFP_KERNEL); - if (!dr) - return -ENOMEM; - urb = usb_alloc_urb (0, GFP_KERNEL); - if (!urb) { - kfree (dr); - return -ENOMEM; - } - - dr->bRequestType = requesttype; - dr->bRequest = request; - dr->wValue = cpu_to_le16 (value); - dr->wIndex = cpu_to_le16 (index); - dr->wLength = cpu_to_le16 (size); - - usb_fill_control_urb (urb, dev, pipe, (unsigned char*)dr, data, size, /* build urb */ - auerchain_blocking_completion, NULL); - ret = auerchain_start_wait_urb (acp, urb, timeout, &length); - - usb_free_urb (urb); - kfree (dr); - - if (ret < 0) - return ret; - else - return length; -} - - -/*-------------------------------------------------------------------*/ -/* Buffer List helper functions */ - -/* free a single auerbuf */ -static void auerbuf_free (pauerbuf_t bp) -{ - kfree(bp->bufp); - kfree(bp->dr); - usb_free_urb(bp->urbp); - kfree(bp); -} - -/* free the buffers from an auerbuf list */ -static void auerbuf_free_list (struct list_head *q) -{ - struct list_head *tmp; - struct list_head *p; - pauerbuf_t bp; - - dbg ("auerbuf_free_list"); - for (p = q->next; p != q;) { - bp = list_entry (p, auerbuf_t, buff_list); - tmp = p->next; - list_del (p); - p = tmp; - auerbuf_free (bp); - } -} - -/* init the members of a list control block */ -static void auerbuf_init (pauerbufctl_t bcp) -{ - dbg ("auerbuf_init"); - spin_lock_init (&bcp->lock); - INIT_LIST_HEAD (&bcp->free_buff_list); - INIT_LIST_HEAD (&bcp->rec_buff_list); -} - -/* free all buffers from an auerbuf chain */ -static void auerbuf_free_buffers (pauerbufctl_t bcp) -{ - unsigned long flags; - dbg ("auerbuf_free_buffers"); - - spin_lock_irqsave (&bcp->lock, flags); - - auerbuf_free_list (&bcp->free_buff_list); - auerbuf_free_list (&bcp->rec_buff_list); - - spin_unlock_irqrestore (&bcp->lock, flags); -} - -/* setup a list of buffers */ -/* requirement: auerbuf_init() */ -static int auerbuf_setup (pauerbufctl_t bcp, unsigned int numElements, unsigned int bufsize) -{ - pauerbuf_t bep = NULL; - - dbg ("auerbuf_setup called with %d elements of %d bytes", numElements, bufsize); - - /* fill the list of free elements */ - for (;numElements; numElements--) { - bep = kzalloc(sizeof(auerbuf_t), GFP_KERNEL); - if (!bep) - goto bl_fail; - bep->list = bcp; - INIT_LIST_HEAD (&bep->buff_list); - bep->bufp = kmalloc (bufsize, GFP_KERNEL); - if (!bep->bufp) - goto bl_fail; - bep->dr = kmalloc(sizeof (struct usb_ctrlrequest), GFP_KERNEL); - if (!bep->dr) - goto bl_fail; - bep->urbp = usb_alloc_urb (0, GFP_KERNEL); - if (!bep->urbp) - goto bl_fail; - list_add_tail (&bep->buff_list, &bcp->free_buff_list); - } - return 0; - -bl_fail:/* not enough memory. Free allocated elements */ - dbg ("auerbuf_setup: no more memory"); - auerbuf_free(bep); - auerbuf_free_buffers (bcp); - return -ENOMEM; -} - -/* insert a used buffer into the free list */ -static void auerbuf_releasebuf( pauerbuf_t bp) -{ - unsigned long flags; - pauerbufctl_t bcp = bp->list; - bp->retries = 0; - - dbg ("auerbuf_releasebuf called"); - spin_lock_irqsave (&bcp->lock, flags); - list_add_tail (&bp->buff_list, &bcp->free_buff_list); - spin_unlock_irqrestore (&bcp->lock, flags); -} - - -/*-------------------------------------------------------------------*/ -/* Completion handlers */ - -/* Values of urb->status or results of usb_submit_urb(): -0 Initial, OK --EINPROGRESS during submission until end --ENOENT if urb is unlinked --ETIME Device did not respond --ENOMEM Memory Overflow --ENODEV Specified USB-device or bus doesn't exist --ENXIO URB already queued --EINVAL a) Invalid transfer type specified (or not supported) - b) Invalid interrupt interval (0n256) --EAGAIN a) Specified ISO start frame too early - b) (using ISO-ASAP) Too much scheduled for the future wait some time and try again. --EFBIG Too much ISO frames requested (currently uhci900) --EPIPE Specified pipe-handle/Endpoint is already stalled --EMSGSIZE Endpoint message size is zero, do interface/alternate setting --EPROTO a) Bitstuff error - b) Unknown USB error --EILSEQ CRC mismatch --ENOSR Buffer error --EREMOTEIO Short packet detected --EXDEV ISO transfer only partially completed look at individual frame status for details --EINVAL ISO madness, if this happens: Log off and go home --EOVERFLOW babble -*/ - -/* check if a status code allows a retry */ -static int auerswald_status_retry (int status) -{ - switch (status) { - case 0: - case -ETIME: - case -EOVERFLOW: - case -EAGAIN: - case -EPIPE: - case -EPROTO: - case -EILSEQ: - case -ENOSR: - case -EREMOTEIO: - return 1; /* do a retry */ - } - return 0; /* no retry possible */ -} - -/* Completion of asynchronous write block */ -static void auerchar_ctrlwrite_complete (struct urb * urb) -{ - pauerbuf_t bp = urb->context; - pauerswald_t cp = ((pauerswald_t)((char *)(bp->list)-(unsigned long)(&((pauerswald_t)0)->bufctl))); - dbg ("auerchar_ctrlwrite_complete called"); - - /* reuse the buffer */ - auerbuf_releasebuf (bp); - /* Wake up all processes waiting for a buffer */ - wake_up (&cp->bufferwait); -} - -/* Completion handler for dummy retry packet */ -static void auerswald_ctrlread_wretcomplete (struct urb * urb) -{ - pauerbuf_t bp = urb->context; - pauerswald_t cp; - int ret; - int status = urb->status; - - dbg ("auerswald_ctrlread_wretcomplete called"); - dbg ("complete with status: %d", status); - cp = ((pauerswald_t)((char *)(bp->list)-(unsigned long)(&((pauerswald_t)0)->bufctl))); - - /* check if it is possible to advance */ - if (!auerswald_status_retry(status) || !cp->usbdev) { - /* reuse the buffer */ - err ("control dummy: transmission error %d, can not retry", status); - auerbuf_releasebuf (bp); - /* Wake up all processes waiting for a buffer */ - wake_up (&cp->bufferwait); - return; - } - - /* fill the control message */ - bp->dr->bRequestType = AUT_RREQ; - bp->dr->bRequest = AUV_RBLOCK; - bp->dr->wLength = bp->dr->wValue; /* temporary stored */ - bp->dr->wValue = cpu_to_le16 (1); /* Retry Flag */ - /* bp->dr->index = channel id; remains */ - usb_fill_control_urb (bp->urbp, cp->usbdev, usb_rcvctrlpipe (cp->usbdev, 0), - (unsigned char*)bp->dr, bp->bufp, le16_to_cpu (bp->dr->wLength), - auerswald_ctrlread_complete,bp); - - /* submit the control msg as next paket */ - ret = auerchain_submit_urb_list (&cp->controlchain, bp->urbp, 1); - if (ret) { - dbg ("auerswald_ctrlread_complete: nonzero result of auerchain_submit_urb_list %d", ret); - bp->urbp->status = ret; - auerswald_ctrlread_complete (bp->urbp); - } -} - -/* completion handler for receiving of control messages */ -static void auerswald_ctrlread_complete (struct urb * urb) -{ - unsigned int serviceid; - pauerswald_t cp; - pauerscon_t scp; - pauerbuf_t bp = urb->context; - int status = urb->status; - int ret; - - dbg ("auerswald_ctrlread_complete called"); - - cp = ((pauerswald_t)((char *)(bp->list)-(unsigned long)(&((pauerswald_t)0)->bufctl))); - - /* check if there is valid data in this urb */ - if (status) { - dbg ("complete with non-zero status: %d", status); - /* should we do a retry? */ - if (!auerswald_status_retry(status) - || !cp->usbdev - || (cp->version < AUV_RETRY) - || (bp->retries >= AU_RETRIES)) { - /* reuse the buffer */ - err ("control read: transmission error %d, can not retry", status); - auerbuf_releasebuf (bp); - /* Wake up all processes waiting for a buffer */ - wake_up (&cp->bufferwait); - return; - } - bp->retries++; - dbg ("Retry count = %d", bp->retries); - /* send a long dummy control-write-message to allow device firmware to react */ - bp->dr->bRequestType = AUT_WREQ; - bp->dr->bRequest = AUV_DUMMY; - bp->dr->wValue = bp->dr->wLength; /* temporary storage */ - // bp->dr->wIndex channel ID remains - bp->dr->wLength = cpu_to_le16 (32); /* >= 8 bytes */ - usb_fill_control_urb (bp->urbp, cp->usbdev, usb_sndctrlpipe (cp->usbdev, 0), - (unsigned char*)bp->dr, bp->bufp, 32, - auerswald_ctrlread_wretcomplete,bp); - - /* submit the control msg as next paket */ - ret = auerchain_submit_urb_list (&cp->controlchain, bp->urbp, 1); - if (ret) { - dbg ("auerswald_ctrlread_complete: nonzero result of auerchain_submit_urb_list %d", ret); - bp->urbp->status = ret; - auerswald_ctrlread_wretcomplete (bp->urbp); - } - return; - } - - /* get the actual bytecount (incl. headerbyte) */ - bp->len = urb->actual_length; - serviceid = bp->bufp[0] & AUH_TYPEMASK; - dbg ("Paket with serviceid %d and %d bytes received", serviceid, bp->len); - - /* dispatch the paket */ - scp = cp->services[serviceid]; - if (scp) { - /* look, Ma, a listener! */ - scp->dispatch (scp, bp); - } - - /* release the paket */ - auerbuf_releasebuf (bp); - /* Wake up all processes waiting for a buffer */ - wake_up (&cp->bufferwait); -} - -/*-------------------------------------------------------------------*/ -/* Handling of Interrupt Endpoint */ -/* This interrupt Endpoint is used to inform the host about waiting - messages from the USB device. -*/ -/* int completion handler. */ -static void auerswald_int_complete (struct urb * urb) -{ - unsigned long flags; - unsigned int channelid; - unsigned int bytecount; - int ret; - int status = urb->status; - pauerbuf_t bp = NULL; - pauerswald_t cp = urb->context; - - dbg ("%s called", __func__); - - switch (status) { - case 0: - /* success */ - break; - case -ECONNRESET: - case -ENOENT: - case -ESHUTDOWN: - /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", __func__, status); - return; - default: - dbg("%s - nonzero urb status received: %d", __func__, status); - goto exit; - } - - /* check if all needed data was received */ - if (urb->actual_length < AU_IRQMINSIZE) { - dbg ("invalid data length received: %d bytes", urb->actual_length); - goto exit; - } - - /* check the command code */ - if (cp->intbufp[0] != AU_IRQCMDID) { - dbg ("invalid command received: %d", cp->intbufp[0]); - goto exit; - } - - /* check the command type */ - if (cp->intbufp[1] != AU_BLOCKRDY) { - dbg ("invalid command type received: %d", cp->intbufp[1]); - goto exit; - } - - /* now extract the information */ - channelid = cp->intbufp[2]; - bytecount = (unsigned char)cp->intbufp[3]; - bytecount |= (unsigned char)cp->intbufp[4] << 8; - - /* check the channel id */ - if (channelid >= AUH_TYPESIZE) { - dbg ("invalid channel id received: %d", channelid); - goto exit; - } - - /* check the byte count */ - if (bytecount > (cp->maxControlLength+AUH_SIZE)) { - dbg ("invalid byte count received: %d", bytecount); - goto exit; - } - dbg ("Service Channel = %d", channelid); - dbg ("Byte Count = %d", bytecount); - - /* get a buffer for the next data paket */ - spin_lock_irqsave (&cp->bufctl.lock, flags); - if (!list_empty (&cp->bufctl.free_buff_list)) { - /* yes: get the entry */ - struct list_head *tmp = cp->bufctl.free_buff_list.next; - list_del (tmp); - bp = list_entry (tmp, auerbuf_t, buff_list); - } - spin_unlock_irqrestore (&cp->bufctl.lock, flags); - - /* if no buffer available: skip it */ - if (!bp) { - dbg ("auerswald_int_complete: no data buffer available"); - /* can we do something more? - This is a big problem: if this int packet is ignored, the - device will wait forever and not signal any more data. - The only real solution is: having enough buffers! - Or perhaps temporary disabling the int endpoint? - */ - goto exit; - } - - /* fill the control message */ - bp->dr->bRequestType = AUT_RREQ; - bp->dr->bRequest = AUV_RBLOCK; - bp->dr->wValue = cpu_to_le16 (0); - bp->dr->wIndex = cpu_to_le16 (channelid | AUH_DIRECT | AUH_UNSPLIT); - bp->dr->wLength = cpu_to_le16 (bytecount); - usb_fill_control_urb (bp->urbp, cp->usbdev, usb_rcvctrlpipe (cp->usbdev, 0), - (unsigned char*)bp->dr, bp->bufp, bytecount, - auerswald_ctrlread_complete,bp); - - /* submit the control msg */ - ret = auerchain_submit_urb (&cp->controlchain, bp->urbp); - if (ret) { - dbg ("auerswald_int_complete: nonzero result of auerchain_submit_urb %d", ret); - bp->urbp->status = ret; - auerswald_ctrlread_complete( bp->urbp); - /* here applies the same problem as above: device locking! */ - } -exit: - ret = usb_submit_urb (urb, GFP_ATOMIC); - if (ret) - err ("%s - usb_submit_urb failed with result %d", - __func__, ret); -} - -/* int memory deallocation - NOTE: no mutex please! -*/ -static void auerswald_int_free (pauerswald_t cp) -{ - if (cp->inturbp) { - usb_free_urb(cp->inturbp); - cp->inturbp = NULL; - } - kfree(cp->intbufp); - cp->intbufp = NULL; -} - -/* This function is called to activate the interrupt - endpoint. This function returns 0 if successful or an error code. - NOTE: no mutex please! -*/ -static int auerswald_int_open (pauerswald_t cp) -{ - int ret; - struct usb_host_endpoint *ep; - int irqsize; - dbg ("auerswald_int_open"); - - ep = cp->usbdev->ep_in[AU_IRQENDP]; - if (!ep) { - ret = -EFAULT; - goto intoend; - } - irqsize = le16_to_cpu(ep->desc.wMaxPacketSize); - cp->irqsize = irqsize; - - /* allocate the urb and data buffer */ - if (!cp->inturbp) { - cp->inturbp = usb_alloc_urb (0, GFP_KERNEL); - if (!cp->inturbp) { - ret = -ENOMEM; - goto intoend; - } - } - if (!cp->intbufp) { - cp->intbufp = kmalloc (irqsize, GFP_KERNEL); - if (!cp->intbufp) { - ret = -ENOMEM; - goto intoend; - } - } - /* setup urb */ - usb_fill_int_urb (cp->inturbp, cp->usbdev, - usb_rcvintpipe (cp->usbdev,AU_IRQENDP), cp->intbufp, - irqsize, auerswald_int_complete, cp, ep->desc.bInterval); - /* start the urb */ - cp->inturbp->status = 0; /* needed! */ - ret = usb_submit_urb (cp->inturbp, GFP_KERNEL); - -intoend: - if (ret < 0) { - /* activation of interrupt endpoint has failed. Now clean up. */ - dbg ("auerswald_int_open: activation of int endpoint failed"); - - /* deallocate memory */ - auerswald_int_free (cp); - } - return ret; -} - -/* This function is called to deactivate the interrupt - endpoint. This function returns 0 if successful or an error code. - NOTE: no mutex please! -*/ -static void auerswald_int_release (pauerswald_t cp) -{ - dbg ("auerswald_int_release"); - - /* stop the int endpoint */ - usb_kill_urb (cp->inturbp); - - /* deallocate memory */ - auerswald_int_free (cp); -} - -/* --------------------------------------------------------------------- */ -/* Helper functions */ - -/* wake up waiting readers */ -static void auerchar_disconnect (pauerscon_t scp) -{ - pauerchar_t ccp = ((pauerchar_t)((char *)(scp)-(unsigned long)(&((pauerchar_t)0)->scontext))); - dbg ("auerchar_disconnect called"); - ccp->removed = 1; - wake_up (&ccp->readwait); -} - - -/* dispatch a read paket to a waiting character device */ -static void auerchar_ctrlread_dispatch (pauerscon_t scp, pauerbuf_t bp) -{ - unsigned long flags; - pauerchar_t ccp; - pauerbuf_t newbp = NULL; - char * charp; - dbg ("auerchar_ctrlread_dispatch called"); - ccp = ((pauerchar_t)((char *)(scp)-(unsigned long)(&((pauerchar_t)0)->scontext))); - - /* get a read buffer from character device context */ - spin_lock_irqsave (&ccp->bufctl.lock, flags); - if (!list_empty (&ccp->bufctl.free_buff_list)) { - /* yes: get the entry */ - struct list_head *tmp = ccp->bufctl.free_buff_list.next; - list_del (tmp); - newbp = list_entry (tmp, auerbuf_t, buff_list); - } - spin_unlock_irqrestore (&ccp->bufctl.lock, flags); - - if (!newbp) { - dbg ("No read buffer available, discard paket!"); - return; /* no buffer, no dispatch */ - } - - /* copy information to new buffer element - (all buffers have the same length) */ - charp = newbp->bufp; - newbp->bufp = bp->bufp; - bp->bufp = charp; - newbp->len = bp->len; - - /* insert new buffer in read list */ - spin_lock_irqsave (&ccp->bufctl.lock, flags); - list_add_tail (&newbp->buff_list, &ccp->bufctl.rec_buff_list); - spin_unlock_irqrestore (&ccp->bufctl.lock, flags); - dbg ("read buffer appended to rec_list"); - - /* wake up pending synchronous reads */ - wake_up (&ccp->readwait); -} - - -/* Delete an auerswald driver context */ -static void auerswald_delete( pauerswald_t cp) -{ - dbg( "auerswald_delete"); - if (cp == NULL) - return; - - /* Wake up all processes waiting for a buffer */ - wake_up (&cp->bufferwait); - - /* Cleaning up */ - auerswald_int_release (cp); - auerchain_free (&cp->controlchain); - auerbuf_free_buffers (&cp->bufctl); - - /* release the memory */ - kfree( cp); -} - - -/* Delete an auerswald character context */ -static void auerchar_delete( pauerchar_t ccp) -{ - dbg ("auerchar_delete"); - if (ccp == NULL) - return; - - /* wake up pending synchronous reads */ - ccp->removed = 1; - wake_up (&ccp->readwait); - - /* remove the read buffer */ - if (ccp->readbuf) { - auerbuf_releasebuf (ccp->readbuf); - ccp->readbuf = NULL; - } - - /* remove the character buffers */ - auerbuf_free_buffers (&ccp->bufctl); - - /* release the memory */ - kfree( ccp); -} - - -/* add a new service to the device - scp->id must be set! - return: 0 if OK, else error code -*/ -static int auerswald_addservice (pauerswald_t cp, pauerscon_t scp) -{ - int ret; - - /* is the device available? */ - if (!cp->usbdev) { - dbg ("usbdev == NULL"); - return -EIO; /*no: can not add a service, sorry*/ - } - - /* is the service available? */ - if (cp->services[scp->id]) { - dbg ("service is busy"); - return -EBUSY; - } - - /* device is available, service is free */ - cp->services[scp->id] = scp; - - /* register service in device */ - ret = auerchain_control_msg( - &cp->controlchain, /* pointer to control chain */ - cp->usbdev, /* pointer to device */ - usb_sndctrlpipe (cp->usbdev, 0), /* pipe to control endpoint */ - AUV_CHANNELCTL, /* USB message request value */ - AUT_WREQ, /* USB message request type value */ - 0x01, /* open USB message value */ - scp->id, /* USB message index value */ - NULL, /* pointer to the data to send */ - 0, /* length in bytes of the data to send */ - HZ * 2); /* time to wait for the message to complete before timing out */ - if (ret < 0) { - dbg ("auerswald_addservice: auerchain_control_msg returned error code %d", ret); - /* undo above actions */ - cp->services[scp->id] = NULL; - return ret; - } - - dbg ("auerswald_addservice: channel open OK"); - return 0; -} - - -/* remove a service from the device - scp->id must be set! */ -static void auerswald_removeservice (pauerswald_t cp, pauerscon_t scp) -{ - dbg ("auerswald_removeservice called"); - - /* check if we have a service allocated */ - if (scp->id == AUH_UNASSIGNED) - return; - - /* If there is a device: close the channel */ - if (cp->usbdev) { - /* Close the service channel inside the device */ - int ret = auerchain_control_msg( - &cp->controlchain, /* pointer to control chain */ - cp->usbdev, /* pointer to device */ - usb_sndctrlpipe (cp->usbdev, 0), /* pipe to control endpoint */ - AUV_CHANNELCTL, /* USB message request value */ - AUT_WREQ, /* USB message request type value */ - 0x00, // close /* USB message value */ - scp->id, /* USB message index value */ - NULL, /* pointer to the data to send */ - 0, /* length in bytes of the data to send */ - HZ * 2); /* time to wait for the message to complete before timing out */ - if (ret < 0) { - dbg ("auerswald_removeservice: auerchain_control_msg returned error code %d", ret); - } - else { - dbg ("auerswald_removeservice: channel close OK"); - } - } - - /* remove the service from the device */ - cp->services[scp->id] = NULL; - scp->id = AUH_UNASSIGNED; -} - - -/* --------------------------------------------------------------------- */ -/* Char device functions */ - -/* Open a new character device */ -static int auerchar_open (struct inode *inode, struct file *file) -{ - int dtindex = iminor(inode); - pauerswald_t cp = NULL; - pauerchar_t ccp = NULL; - struct usb_interface *intf; - int ret; - - /* minor number in range? */ - if (dtindex < 0) { - return -ENODEV; - } - intf = usb_find_interface(&auerswald_driver, dtindex); - if (!intf) { - return -ENODEV; - } - - /* usb device available? */ - cp = usb_get_intfdata (intf); - if (cp == NULL) { - return -ENODEV; - } - if (mutex_lock_interruptible(&cp->mutex)) { - return -ERESTARTSYS; - } - - /* we have access to the device. Now lets allocate memory */ - ccp = kzalloc(sizeof(auerchar_t), GFP_KERNEL); - if (ccp == NULL) { - err ("out of memory"); - ret = -ENOMEM; - goto ofail; - } - - /* Initialize device descriptor */ - mutex_init(&ccp->mutex); - mutex_init(&ccp->readmutex); - auerbuf_init (&ccp->bufctl); - ccp->scontext.id = AUH_UNASSIGNED; - ccp->scontext.dispatch = auerchar_ctrlread_dispatch; - ccp->scontext.disconnect = auerchar_disconnect; - init_waitqueue_head (&ccp->readwait); - - ret = auerbuf_setup (&ccp->bufctl, AU_RBUFFERS, cp->maxControlLength+AUH_SIZE); - if (ret) { - goto ofail; - } - - cp->open_count++; - ccp->auerdev = cp; - dbg("open %s as /dev/%s", cp->dev_desc, cp->name); - mutex_unlock(&cp->mutex); - - /* file IO stuff */ - file->f_pos = 0; - file->private_data = ccp; - return nonseekable_open(inode, file); - - /* Error exit */ -ofail: mutex_unlock(&cp->mutex); - auerchar_delete (ccp); - return ret; -} - - -/* IOCTL functions */ -static long auerchar_ioctl(struct file *file, unsigned int cmd, - unsigned long arg) -{ - pauerchar_t ccp = (pauerchar_t) file->private_data; - int ret = 0; - audevinfo_t devinfo; - pauerswald_t cp = NULL; - unsigned int u; - unsigned int __user *user_arg = (unsigned int __user *)arg; - - dbg ("ioctl"); - - /* get the mutexes */ - if (mutex_lock_interruptible(&ccp->mutex)) { - return -ERESTARTSYS; - } - cp = ccp->auerdev; - if (!cp) { - mutex_unlock(&ccp->mutex); - return -ENODEV; - } - if (mutex_lock_interruptible(&cp->mutex)) { - mutex_unlock(&ccp->mutex); - return -ERESTARTSYS; - } - - /* Check for removal */ - if (!cp->usbdev) { - mutex_unlock(&cp->mutex); - mutex_unlock(&ccp->mutex); - return -ENODEV; - } - lock_kernel(); - switch (cmd) { - - /* return != 0 if Transmitt channel ready to send */ - case IOCTL_AU_TXREADY: - dbg ("IOCTL_AU_TXREADY"); - u = ccp->auerdev - && (ccp->scontext.id != AUH_UNASSIGNED) - && !list_empty (&cp->bufctl.free_buff_list); - ret = put_user (u, user_arg); - break; - - /* return != 0 if connected to a service channel */ - case IOCTL_AU_CONNECT: - dbg ("IOCTL_AU_CONNECT"); - u = (ccp->scontext.id != AUH_UNASSIGNED); - ret = put_user (u, user_arg); - break; - - /* return != 0 if Receive Data available */ - case IOCTL_AU_RXAVAIL: - dbg ("IOCTL_AU_RXAVAIL"); - if (ccp->scontext.id == AUH_UNASSIGNED) { - ret = -EIO; - break; - } - u = 0; /* no data */ - if (ccp->readbuf) { - int restlen = ccp->readbuf->len - ccp->readoffset; - if (restlen > 0) - u = 1; - } - if (!u) { - if (!list_empty (&ccp->bufctl.rec_buff_list)) { - u = 1; - } - } - ret = put_user (u, user_arg); - break; - - /* return the max. buffer length for the device */ - case IOCTL_AU_BUFLEN: - dbg ("IOCTL_AU_BUFLEN"); - u = cp->maxControlLength; - ret = put_user (u, user_arg); - break; - - /* requesting a service channel */ - case IOCTL_AU_SERVREQ: - dbg ("IOCTL_AU_SERVREQ"); - /* requesting a service means: release the previous one first */ - auerswald_removeservice (cp, &ccp->scontext); - /* get the channel number */ - ret = get_user (u, user_arg); - if (ret) { - break; - } - if ((u < AUH_FIRSTUSERCH) || (u >= AUH_TYPESIZE)) { - ret = -EIO; - break; - } - dbg ("auerchar service request parameters are ok"); - ccp->scontext.id = u; - - /* request the service now */ - ret = auerswald_addservice (cp, &ccp->scontext); - if (ret) { - /* no: revert service entry */ - ccp->scontext.id = AUH_UNASSIGNED; - } - break; - - /* get a string descriptor for the device */ - case IOCTL_AU_DEVINFO: - dbg ("IOCTL_AU_DEVINFO"); - if (copy_from_user (&devinfo, (void __user *) arg, sizeof (audevinfo_t))) { - ret = -EFAULT; - break; - } - u = strlen(cp->dev_desc)+1; - if (u > devinfo.bsize) { - u = devinfo.bsize; - } - ret = copy_to_user(devinfo.buf, cp->dev_desc, u) ? -EFAULT : 0; - break; - - /* get the max. string descriptor length */ - case IOCTL_AU_SLEN: - dbg ("IOCTL_AU_SLEN"); - u = AUSI_DLEN; - ret = put_user (u, user_arg); - break; - - default: - dbg ("IOCTL_AU_UNKNOWN"); - ret = -ENOTTY; - break; - } - unlock_kernel(); - /* release the mutexes */ - mutex_unlock(&cp->mutex); - mutex_unlock(&ccp->mutex); - return ret; -} - -/* Read data from the device */ -static ssize_t auerchar_read (struct file *file, char __user *buf, size_t count, loff_t * ppos) -{ - unsigned long flags; - pauerchar_t ccp = (pauerchar_t) file->private_data; - pauerbuf_t bp = NULL; - wait_queue_t wait; - - dbg ("auerchar_read"); - - /* Error checking */ - if (!ccp) - return -EIO; - if (*ppos) - return -ESPIPE; - if (count == 0) - return 0; - - /* get the mutex */ - if (mutex_lock_interruptible(&ccp->mutex)) - return -ERESTARTSYS; - - /* Can we expect to read something? */ - if (ccp->scontext.id == AUH_UNASSIGNED) { - mutex_unlock(&ccp->mutex); - return -EIO; - } - - /* only one reader per device allowed */ - if (mutex_lock_interruptible(&ccp->readmutex)) { - mutex_unlock(&ccp->mutex); - return -ERESTARTSYS; - } - - /* read data from readbuf, if available */ -doreadbuf: - bp = ccp->readbuf; - if (bp) { - /* read the maximum bytes */ - int restlen = bp->len - ccp->readoffset; - if (restlen < 0) - restlen = 0; - if (count > restlen) - count = restlen; - if (count) { - if (copy_to_user (buf, bp->bufp+ccp->readoffset, count)) { - dbg ("auerswald_read: copy_to_user failed"); - mutex_unlock(&ccp->readmutex); - mutex_unlock(&ccp->mutex); - return -EFAULT; - } - } - /* advance the read offset */ - ccp->readoffset += count; - restlen -= count; - // reuse the read buffer - if (restlen <= 0) { - auerbuf_releasebuf (bp); - ccp->readbuf = NULL; - } - /* return with number of bytes read */ - if (count) { - mutex_unlock(&ccp->readmutex); - mutex_unlock(&ccp->mutex); - return count; - } - } - - /* a read buffer is not available. Try to get the next data block. */ -doreadlist: - /* Preparing for sleep */ - init_waitqueue_entry (&wait, current); - set_current_state (TASK_INTERRUPTIBLE); - add_wait_queue (&ccp->readwait, &wait); - - bp = NULL; - spin_lock_irqsave (&ccp->bufctl.lock, flags); - if (!list_empty (&ccp->bufctl.rec_buff_list)) { - /* yes: get the entry */ - struct list_head *tmp = ccp->bufctl.rec_buff_list.next; - list_del (tmp); - bp = list_entry (tmp, auerbuf_t, buff_list); - } - spin_unlock_irqrestore (&ccp->bufctl.lock, flags); - - /* have we got data? */ - if (bp) { - ccp->readbuf = bp; - ccp->readoffset = AUH_SIZE; /* for headerbyte */ - set_current_state (TASK_RUNNING); - remove_wait_queue (&ccp->readwait, &wait); - goto doreadbuf; /* now we can read! */ - } - - /* no data available. Should we wait? */ - if (file->f_flags & O_NONBLOCK) { - dbg ("No read buffer available, returning -EAGAIN"); - set_current_state (TASK_RUNNING); - remove_wait_queue (&ccp->readwait, &wait); - mutex_unlock(&ccp->readmutex); - mutex_unlock(&ccp->mutex); - return -EAGAIN; /* nonblocking, no data available */ - } - - /* yes, we should wait! */ - mutex_unlock(&ccp->mutex); /* allow other operations while we wait */ - schedule(); - remove_wait_queue (&ccp->readwait, &wait); - if (signal_pending (current)) { - /* waked up by a signal */ - mutex_unlock(&ccp->readmutex); - return -ERESTARTSYS; - } - - /* Anything left to read? */ - if ((ccp->scontext.id == AUH_UNASSIGNED) || ccp->removed) { - mutex_unlock(&ccp->readmutex); - return -EIO; - } - - if (mutex_lock_interruptible(&ccp->mutex)) { - mutex_unlock(&ccp->readmutex); - return -ERESTARTSYS; - } - - /* try to read the incoming data again */ - goto doreadlist; -} - - -/* Write a data block into the right service channel of the device */ -static ssize_t auerchar_write (struct file *file, const char __user *buf, size_t len, loff_t *ppos) -{ - pauerchar_t ccp = (pauerchar_t) file->private_data; - pauerswald_t cp = NULL; - pauerbuf_t bp; - unsigned long flags; - int ret; - wait_queue_t wait; - - dbg ("auerchar_write %zd bytes", len); - - /* Error checking */ - if (!ccp) - return -EIO; - if (*ppos) - return -ESPIPE; - if (len == 0) - return 0; - -write_again: - /* get the mutex */ - if (mutex_lock_interruptible(&ccp->mutex)) - return -ERESTARTSYS; - - /* Can we expect to write something? */ - if (ccp->scontext.id == AUH_UNASSIGNED) { - mutex_unlock(&ccp->mutex); - return -EIO; - } - - cp = ccp->auerdev; - if (!cp) { - mutex_unlock(&ccp->mutex); - return -ERESTARTSYS; - } - if (mutex_lock_interruptible(&cp->mutex)) { - mutex_unlock(&ccp->mutex); - return -ERESTARTSYS; - } - if (!cp->usbdev) { - mutex_unlock(&cp->mutex); - mutex_unlock(&ccp->mutex); - return -EIO; - } - /* Prepare for sleep */ - init_waitqueue_entry (&wait, current); - set_current_state (TASK_INTERRUPTIBLE); - add_wait_queue (&cp->bufferwait, &wait); - - /* Try to get a buffer from the device pool. - We can't use a buffer from ccp->bufctl because the write - command will last beond a release() */ - bp = NULL; - spin_lock_irqsave (&cp->bufctl.lock, flags); - if (!list_empty (&cp->bufctl.free_buff_list)) { - /* yes: get the entry */ - struct list_head *tmp = cp->bufctl.free_buff_list.next; - list_del (tmp); - bp = list_entry (tmp, auerbuf_t, buff_list); - } - spin_unlock_irqrestore (&cp->bufctl.lock, flags); - - /* are there any buffers left? */ - if (!bp) { - mutex_unlock(&cp->mutex); - mutex_unlock(&ccp->mutex); - - /* NONBLOCK: don't wait */ - if (file->f_flags & O_NONBLOCK) { - set_current_state (TASK_RUNNING); - remove_wait_queue (&cp->bufferwait, &wait); - return -EAGAIN; - } - - /* BLOCKING: wait */ - schedule(); - remove_wait_queue (&cp->bufferwait, &wait); - if (signal_pending (current)) { - /* waked up by a signal */ - return -ERESTARTSYS; - } - goto write_again; - } else { - set_current_state (TASK_RUNNING); - remove_wait_queue (&cp->bufferwait, &wait); - } - - /* protect against too big write requests */ - if (len > cp->maxControlLength) - len = cp->maxControlLength; - - /* Fill the buffer */ - if (copy_from_user ( bp->bufp+AUH_SIZE, buf, len)) { - dbg ("copy_from_user failed"); - auerbuf_releasebuf (bp); - /* Wake up all processes waiting for a buffer */ - wake_up (&cp->bufferwait); - mutex_unlock(&cp->mutex); - mutex_unlock(&ccp->mutex); - return -EFAULT; - } - - /* set the header byte */ - *(bp->bufp) = ccp->scontext.id | AUH_DIRECT | AUH_UNSPLIT; - - /* Set the transfer Parameters */ - bp->len = len+AUH_SIZE; - bp->dr->bRequestType = AUT_WREQ; - bp->dr->bRequest = AUV_WBLOCK; - bp->dr->wValue = cpu_to_le16 (0); - bp->dr->wIndex = cpu_to_le16 (ccp->scontext.id | AUH_DIRECT | AUH_UNSPLIT); - bp->dr->wLength = cpu_to_le16 (len+AUH_SIZE); - usb_fill_control_urb (bp->urbp, cp->usbdev, usb_sndctrlpipe (cp->usbdev, 0), - (unsigned char*)bp->dr, bp->bufp, len+AUH_SIZE, - auerchar_ctrlwrite_complete, bp); - /* up we go */ - ret = auerchain_submit_urb (&cp->controlchain, bp->urbp); - mutex_unlock(&cp->mutex); - if (ret) { - dbg ("auerchar_write: nonzero result of auerchain_submit_urb %d", ret); - auerbuf_releasebuf (bp); - /* Wake up all processes waiting for a buffer */ - wake_up (&cp->bufferwait); - mutex_unlock(&ccp->mutex); - return -EIO; - } - else { - dbg ("auerchar_write: Write OK"); - mutex_unlock(&ccp->mutex); - return len; - } -} - - -/* Close a character device */ -static int auerchar_release (struct inode *inode, struct file *file) -{ - pauerchar_t ccp = (pauerchar_t) file->private_data; - pauerswald_t cp; - dbg("release"); - - mutex_lock(&ccp->mutex); - cp = ccp->auerdev; - if (cp) { - mutex_lock(&cp->mutex); - /* remove an open service */ - auerswald_removeservice (cp, &ccp->scontext); - /* detach from device */ - if ((--cp->open_count <= 0) && (cp->usbdev == NULL)) { - /* usb device waits for removal */ - mutex_unlock(&cp->mutex); - auerswald_delete (cp); - } else { - mutex_unlock(&cp->mutex); - } - cp = NULL; - ccp->auerdev = NULL; - } - mutex_unlock(&ccp->mutex); - auerchar_delete (ccp); - - return 0; -} - - -/*----------------------------------------------------------------------*/ -/* File operation structure */ -static const struct file_operations auerswald_fops = -{ - .owner = THIS_MODULE, - .llseek = no_llseek, - .read = auerchar_read, - .write = auerchar_write, - .unlocked_ioctl = auerchar_ioctl, - .open = auerchar_open, - .release = auerchar_release, -}; - -static struct usb_class_driver auerswald_class = { - .name = "auer%d", - .fops = &auerswald_fops, - .minor_base = AUER_MINOR_BASE, -}; - - -/* --------------------------------------------------------------------- */ -/* Special USB driver functions */ - -/* Probe if this driver wants to serve an USB device - - This entry point is called whenever a new device is attached to the bus. - Then the device driver has to create a new instance of its internal data - structures for the new device. - - The dev argument specifies the device context, which contains pointers - to all USB descriptors. The interface argument specifies the interface - number. If a USB driver wants to bind itself to a particular device and - interface it has to return a pointer. This pointer normally references - the device driver's context structure. - - Probing normally is done by checking the vendor and product identifications - or the class and subclass definitions. If they match the interface number - is compared with the ones supported by the driver. When probing is done - class based it might be necessary to parse some more USB descriptors because - the device properties can differ in a wide range. -*/ -static int auerswald_probe (struct usb_interface *intf, - const struct usb_device_id *id) -{ - struct usb_device *usbdev = interface_to_usbdev(intf); - pauerswald_t cp = NULL; - unsigned int u = 0; - __le16 *pbuf; - int ret; - - dbg ("probe: vendor id 0x%x, device id 0x%x", - le16_to_cpu(usbdev->descriptor.idVendor), - le16_to_cpu(usbdev->descriptor.idProduct)); - - /* we use only the first -and only- interface */ - if (intf->altsetting->desc.bInterfaceNumber != 0) - return -ENODEV; - - /* allocate memory for our device and initialize it */ - cp = kzalloc (sizeof(auerswald_t), GFP_KERNEL); - if (cp == NULL) { - err ("out of memory"); - goto pfail; - } - - /* Initialize device descriptor */ - mutex_init(&cp->mutex); - cp->usbdev = usbdev; - auerchain_init (&cp->controlchain); - auerbuf_init (&cp->bufctl); - init_waitqueue_head (&cp->bufferwait); - - ret = usb_register_dev(intf, &auerswald_class); - if (ret) { - err ("Not able to get a minor for this device."); - goto pfail; - } - - /* Give the device a name */ - sprintf (cp->name, "usb/auer%d", intf->minor); - - /* Store the index */ - cp->dtindex = intf->minor; - - /* Get the usb version of the device */ - cp->version = le16_to_cpu(cp->usbdev->descriptor.bcdDevice); - dbg ("Version is %X", cp->version); - - /* allow some time to settle the device */ - msleep(334); - - /* Try to get a suitable textual description of the device */ - /* Device name:*/ - ret = usb_string( cp->usbdev, AUSI_DEVICE, cp->dev_desc, AUSI_DLEN-1); - if (ret >= 0) { - u += ret; - /* Append Serial Number */ - memcpy(&cp->dev_desc[u], ",Ser# ", 6); - u += 6; - ret = usb_string( cp->usbdev, AUSI_SERIALNR, &cp->dev_desc[u], AUSI_DLEN-u-1); - if (ret >= 0) { - u += ret; - /* Append subscriber number */ - memcpy(&cp->dev_desc[u], ", ", 2); - u += 2; - ret = usb_string( cp->usbdev, AUSI_MSN, &cp->dev_desc[u], AUSI_DLEN-u-1); - if (ret >= 0) { - u += ret; - } - } - } - cp->dev_desc[u] = '\0'; - info("device is a %s", cp->dev_desc); - - /* get the maximum allowed control transfer length */ - pbuf = kmalloc(2, GFP_KERNEL); /* use an allocated buffer because of urb target */ - if (!pbuf) { - err( "out of memory"); - goto pfail; - } - ret = usb_control_msg(cp->usbdev, /* pointer to device */ - usb_rcvctrlpipe( cp->usbdev, 0 ), /* pipe to control endpoint */ - AUV_GETINFO, /* USB message request value */ - AUT_RREQ, /* USB message request type value */ - 0, /* USB message value */ - AUDI_MBCTRANS, /* USB message index value */ - pbuf, /* pointer to the receive buffer */ - 2, /* length of the buffer */ - 2000); /* time to wait for the message to complete before timing out */ - if (ret == 2) { - cp->maxControlLength = le16_to_cpup(pbuf); - kfree(pbuf); - dbg("setup: max. allowed control transfersize is %d bytes", cp->maxControlLength); - } else { - kfree(pbuf); - err("setup: getting max. allowed control transfer length failed with error %d", ret); - goto pfail; - } - - /* allocate a chain for the control messages */ - if (auerchain_setup (&cp->controlchain, AUCH_ELEMENTS)) { - err ("out of memory"); - goto pfail; - } - - /* allocate buffers for control messages */ - if (auerbuf_setup (&cp->bufctl, AU_RBUFFERS, cp->maxControlLength+AUH_SIZE)) { - err ("out of memory"); - goto pfail; - } - - /* start the interrupt endpoint */ - if (auerswald_int_open (cp)) { - err ("int endpoint failed"); - goto pfail; - } - - /* all OK */ - usb_set_intfdata (intf, cp); - return 0; - - /* Error exit: clean up the memory */ -pfail: auerswald_delete (cp); - return -EIO; -} - - -/* Disconnect driver from a served device - - This function is called whenever a device which was served by this driver - is disconnected. - - The argument dev specifies the device context and the driver_context - returns a pointer to the previously registered driver_context of the - probe function. After returning from the disconnect function the USB - framework completely deallocates all data structures associated with - this device. So especially the usb_device structure must not be used - any longer by the usb driver. -*/ -static void auerswald_disconnect (struct usb_interface *intf) -{ - pauerswald_t cp = usb_get_intfdata (intf); - unsigned int u; - - usb_set_intfdata (intf, NULL); - if (!cp) - return; - - /* give back our USB minor number */ - usb_deregister_dev(intf, &auerswald_class); - - mutex_lock(&cp->mutex); - info ("device /dev/%s now disconnecting", cp->name); - - /* Stop the interrupt endpoint */ - auerswald_int_release (cp); - - /* remove the control chain allocated in auerswald_probe - This has the benefit of - a) all pending (a)synchronous urbs are unlinked - b) all buffers dealing with urbs are reclaimed - */ - auerchain_free (&cp->controlchain); - - if (cp->open_count == 0) { - /* nobody is using this device. So we can clean up now */ - mutex_unlock(&cp->mutex); - /* mutex_unlock() is possible here because no other task - can open the device (see above). I don't want - to kfree() a locked mutex. */ - - auerswald_delete (cp); - } else { - /* device is used. Remove the pointer to the - usb device (it's not valid any more). The last - release() will do the clean up */ - cp->usbdev = NULL; - mutex_unlock(&cp->mutex); - /* Terminate waiting writers */ - wake_up (&cp->bufferwait); - /* Inform all waiting readers */ - for ( u = 0; u < AUH_TYPESIZE; u++) { - pauerscon_t scp = cp->services[u]; - if (scp) - scp->disconnect( scp); - } - } -} - -/* Descriptor for the devices which are served by this driver. - NOTE: this struct is parsed by the usbmanager install scripts. - Don't change without caution! -*/ -static struct usb_device_id auerswald_ids [] = { - { USB_DEVICE (ID_AUERSWALD, 0x00C0) }, /* COMpact 2104 USB */ - { USB_DEVICE (ID_AUERSWALD, 0x00DB) }, /* COMpact 4410/2206 USB */ - { USB_DEVICE (ID_AUERSWALD, 0x00DC) }, /* COMpact 4406 DSL */ - { USB_DEVICE (ID_AUERSWALD, 0x00DD) }, /* COMpact 2204 USB */ - { USB_DEVICE (ID_AUERSWALD, 0x00F1) }, /* Comfort 2000 System Telephone */ - { USB_DEVICE (ID_AUERSWALD, 0x00F2) }, /* Comfort 1200 System Telephone */ - { } /* Terminating entry */ -}; - -/* Standard module device table */ -MODULE_DEVICE_TABLE (usb, auerswald_ids); - -/* Standard usb driver struct */ -static struct usb_driver auerswald_driver = { - .name = "auerswald", - .probe = auerswald_probe, - .disconnect = auerswald_disconnect, - .id_table = auerswald_ids, -}; - - -/* --------------------------------------------------------------------- */ -/* Module loading/unloading */ - -/* Driver initialisation. Called after module loading. - NOTE: there is no concurrency at _init -*/ -static int __init auerswald_init (void) -{ - int result; - dbg ("init"); - - /* register driver at the USB subsystem */ - result = usb_register (&auerswald_driver); - if (result < 0) { - err ("driver could not be registered"); - return -1; - } - return 0; -} - -/* Driver deinit. Called before module removal. - NOTE: there is no concurrency at _cleanup -*/ -static void __exit auerswald_cleanup (void) -{ - dbg ("cleanup"); - usb_deregister (&auerswald_driver); -} - -/* --------------------------------------------------------------------- */ -/* Linux device driver module description */ - -MODULE_AUTHOR (DRIVER_AUTHOR); -MODULE_DESCRIPTION (DRIVER_DESC); -MODULE_LICENSE ("GPL"); - -module_init (auerswald_init); -module_exit (auerswald_cleanup); - -/* --------------------------------------------------------------------- */ - |