summaryrefslogtreecommitdiffstats
path: root/drivers/usb/misc/emi26.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/misc/emi26.c')
-rw-r--r--drivers/usb/misc/emi26.c96
1 files changed, 66 insertions, 30 deletions
diff --git a/drivers/usb/misc/emi26.c b/drivers/usb/misc/emi26.c
index 4b9dc81b845..4b994a0cd27 100644
--- a/drivers/usb/misc/emi26.c
+++ b/drivers/usb/misc/emi26.c
@@ -16,18 +16,8 @@
#include <linux/init.h>
#include <linux/usb.h>
#include <linux/delay.h>
-
-#define MAX_INTEL_HEX_RECORD_LENGTH 16
-typedef struct _INTEL_HEX_RECORD
-{
- __u32 length;
- __u32 address;
- __u32 type;
- __u8 data[MAX_INTEL_HEX_RECORD_LENGTH];
-} INTEL_HEX_RECORD, *PINTEL_HEX_RECORD;
-
-/* include firmware (variables) */
-#include "emi26_fw.h"
+#include <linux/firmware.h>
+#include <linux/ihex.h>
#define EMI26_VENDOR_ID 0x086a /* Emagic Soft-und Hardware GmBH */
#define EMI26_PRODUCT_ID 0x0100 /* EMI 2|6 without firmware */
@@ -40,7 +30,9 @@ typedef struct _INTEL_HEX_RECORD
#define CPUCS_REG 0x7F92 /* EZ-USB Control and Status Register. Bit 0 controls 8051 reset */
#define INTERNAL_RAM(address) (address <= MAX_INTERNAL_ADDRESS)
-static int emi26_writememory( struct usb_device *dev, int address, unsigned char *data, int length, __u8 bRequest);
+static int emi26_writememory( struct usb_device *dev, int address,
+ const unsigned char *data, int length,
+ __u8 bRequest);
static int emi26_set_reset(struct usb_device *dev, unsigned char reset_bit);
static int emi26_load_firmware (struct usb_device *dev);
static int emi26_probe(struct usb_interface *intf, const struct usb_device_id *id);
@@ -50,7 +42,9 @@ static void __exit emi26_exit (void);
/* thanks to drivers/usb/serial/keyspan_pda.c code */
-static int emi26_writememory (struct usb_device *dev, int address, unsigned char *data, int length, __u8 request)
+static int emi26_writememory (struct usb_device *dev, int address,
+ const unsigned char *data, int length,
+ __u8 request)
{
int result;
unsigned char *buffer = kmemdup(data, length, GFP_KERNEL);
@@ -83,9 +77,12 @@ static int emi26_set_reset (struct usb_device *dev, unsigned char reset_bit)
static int emi26_load_firmware (struct usb_device *dev)
{
+ const struct firmware *loader_fw = NULL;
+ const struct firmware *bitstream_fw = NULL;
+ const struct firmware *firmware_fw = NULL;
+ const struct ihex_binrec *rec;
int err;
int i;
- int pos = 0; /* Position in hex record */
__u32 addr; /* Address to write */
__u8 *buf;
@@ -96,6 +93,23 @@ static int emi26_load_firmware (struct usb_device *dev)
goto wraperr;
}
+ err = request_ihex_firmware(&loader_fw, "emi26/loader.fw", &dev->dev);
+ if (err)
+ goto nofw;
+
+ err = request_ihex_firmware(&bitstream_fw, "emi26/bitstream.fw",
+ &dev->dev);
+ if (err)
+ goto nofw;
+
+ err = request_ihex_firmware(&firmware_fw, "emi26/firmware.fw",
+ &dev->dev);
+ if (err) {
+ nofw:
+ err( "%s - request_firmware() failed", __func__);
+ goto wraperr;
+ }
+
/* Assert reset (stop the CPU in the EMI) */
err = emi26_set_reset(dev,1);
if (err < 0) {
@@ -103,13 +117,17 @@ static int emi26_load_firmware (struct usb_device *dev)
goto wraperr;
}
+ rec = (const struct ihex_binrec *)loader_fw->data;
/* 1. We need to put the loader for the FPGA into the EZ-USB */
- for (i=0; g_Loader[i].type == 0; i++) {
- err = emi26_writememory(dev, g_Loader[i].address, g_Loader[i].data, g_Loader[i].length, ANCHOR_LOAD_INTERNAL);
+ while (rec) {
+ err = emi26_writememory(dev, be32_to_cpu(rec->addr),
+ rec->data, be16_to_cpu(rec->len),
+ ANCHOR_LOAD_INTERNAL);
if (err < 0) {
err("%s - error loading firmware: error = %d", __func__, err);
goto wraperr;
}
+ rec = ihex_next_binrec(rec);
}
/* De-assert reset (let the CPU run) */
@@ -123,15 +141,16 @@ static int emi26_load_firmware (struct usb_device *dev)
/* 2. We upload the FPGA firmware into the EMI
* Note: collect up to 1023 (yes!) bytes and send them with
* a single request. This is _much_ faster! */
+ rec = (const struct ihex_binrec *)bitstream_fw->data;
do {
i = 0;
- addr = g_bitstream[pos].address;
+ addr = be32_to_cpu(rec->addr);
/* intel hex records are terminated with type 0 element */
- while ((g_bitstream[pos].type == 0) && (i + g_bitstream[pos].length < FW_LOAD_SIZE)) {
- memcpy(buf + i, g_bitstream[pos].data, g_bitstream[pos].length);
- i += g_bitstream[pos].length;
- pos++;
+ while (rec && (i + be16_to_cpu(rec->len) < FW_LOAD_SIZE)) {
+ memcpy(buf + i, rec->data, be16_to_cpu(rec->len));
+ i += be16_to_cpu(rec->len);
+ rec = ihex_next_binrec(rec);
}
err = emi26_writememory(dev, addr, buf, i, ANCHOR_LOAD_FPGA);
if (err < 0) {
@@ -148,8 +167,11 @@ static int emi26_load_firmware (struct usb_device *dev)
}
/* 3. We need to put the loader for the firmware into the EZ-USB (again...) */
- for (i=0; g_Loader[i].type == 0; i++) {
- err = emi26_writememory(dev, g_Loader[i].address, g_Loader[i].data, g_Loader[i].length, ANCHOR_LOAD_INTERNAL);
+ for (rec = (const struct ihex_binrec *)loader_fw->data;
+ rec; rec = ihex_next_binrec(rec)) {
+ err = emi26_writememory(dev, be32_to_cpu(rec->addr),
+ rec->data, be16_to_cpu(rec->len),
+ ANCHOR_LOAD_INTERNAL);
if (err < 0) {
err("%s - error loading firmware: error = %d", __func__, err);
goto wraperr;
@@ -165,9 +187,13 @@ static int emi26_load_firmware (struct usb_device *dev)
}
/* 4. We put the part of the firmware that lies in the external RAM into the EZ-USB */
- for (i=0; g_Firmware[i].type == 0; i++) {
- if (!INTERNAL_RAM(g_Firmware[i].address)) {
- err = emi26_writememory(dev, g_Firmware[i].address, g_Firmware[i].data, g_Firmware[i].length, ANCHOR_LOAD_EXTERNAL);
+
+ for (rec = (const struct ihex_binrec *)firmware_fw->data;
+ rec; rec = ihex_next_binrec(rec)) {
+ if (!INTERNAL_RAM(be32_to_cpu(rec->addr))) {
+ err = emi26_writememory(dev, be32_to_cpu(rec->addr),
+ rec->data, be16_to_cpu(rec->len),
+ ANCHOR_LOAD_EXTERNAL);
if (err < 0) {
err("%s - error loading firmware: error = %d", __func__, err);
goto wraperr;
@@ -182,9 +208,12 @@ static int emi26_load_firmware (struct usb_device *dev)
goto wraperr;
}
- for (i=0; g_Firmware[i].type == 0; i++) {
- if (INTERNAL_RAM(g_Firmware[i].address)) {
- err = emi26_writememory(dev, g_Firmware[i].address, g_Firmware[i].data, g_Firmware[i].length, ANCHOR_LOAD_INTERNAL);
+ for (rec = (const struct ihex_binrec *)firmware_fw->data;
+ rec; rec = ihex_next_binrec(rec)) {
+ if (INTERNAL_RAM(be32_to_cpu(rec->addr))) {
+ err = emi26_writememory(dev, be32_to_cpu(rec->addr),
+ rec->data, be16_to_cpu(rec->len),
+ ANCHOR_LOAD_INTERNAL);
if (err < 0) {
err("%s - error loading firmware: error = %d", __func__, err);
goto wraperr;
@@ -205,6 +234,10 @@ static int emi26_load_firmware (struct usb_device *dev)
err = 1;
wraperr:
+ release_firmware(loader_fw);
+ release_firmware(bitstream_fw);
+ release_firmware(firmware_fw);
+
kfree(buf);
return err;
}
@@ -257,5 +290,8 @@ MODULE_AUTHOR("Tapio Laxström");
MODULE_DESCRIPTION("Emagic EMI 2|6 firmware loader.");
MODULE_LICENSE("GPL");
+MODULE_FIRMWARE("emi26/loader.fw");
+MODULE_FIRMWARE("emi26/bitstream.fw");
+MODULE_FIRMWARE("emi26/firmware.fw");
/* vi:ai:syntax=c:sw=8:ts=8:tw=80
*/