diff options
Diffstat (limited to 'drivers/usb/musb/blackfin.h')
| -rw-r--r-- | drivers/usb/musb/blackfin.h | 39 |
1 files changed, 37 insertions, 2 deletions
diff --git a/drivers/usb/musb/blackfin.h b/drivers/usb/musb/blackfin.h index a240c1e53d1..bd9352a2ef2 100644 --- a/drivers/usb/musb/blackfin.h +++ b/drivers/usb/musb/blackfin.h @@ -14,6 +14,43 @@ * Blackfin specific definitions */ +/* Anomalies notes: + * + * 05000450 - USB DMA Mode 1 Short Packet Data Corruption: + * MUSB driver is designed to transfer buffer of N * maxpacket size + * in DMA mode 1 and leave the rest of the data to the next + * transfer in DMA mode 0, so we never transmit a short packet in + * DMA mode 1. + * + * 05000463 - This anomaly doesn't affect this driver since it + * never uses L1 or L2 memory as data destination. + * + * 05000464 - This anomaly doesn't affect this driver since it + * never uses L1 or L2 memory as data source. + * + * 05000465 - The anomaly can be seen when SCLK is over 100 MHz, and there is + * no way to workaround for bulk endpoints. Since the wMaxPackSize + * of bulk is less than or equal to 512, while the fifo size of + * endpoint 5, 6, 7 is 1024, the double buffer mode is enabled + * automatically when these endpoints are used for bulk OUT. + * + * 05000466 - This anomaly doesn't affect this driver since it never mixes + * concurrent DMA and core accesses to the TX endpoint FIFOs. + * + * 05000467 - The workaround for this anomaly will introduce another + * anomaly - 05000465. + */ + +/* The Mentor USB DMA engine on BF52x (silicon v0.0 and v0.1) seems to be + * unstable in host mode. This may be caused by Anomaly 05000380. After + * digging out the root cause, we will change this number accordingly. + * So, need to either use silicon v0.2+ or disable DMA mode in MUSB. + */ +#if ANOMALY_05000380 && defined(CONFIG_BF52x) && \ + defined(CONFIG_USB_MUSB_HDRC) && !defined(CONFIG_MUSB_PIO_ONLY) +# error "Please use PIO mode in MUSB driver on bf52x chip v0.0 and v0.1" +#endif + #undef DUMP_FIFO_DATA #ifdef DUMP_FIFO_DATA static void dump_fifo_data(u8 *buf, u16 len) @@ -32,7 +69,6 @@ static void dump_fifo_data(u8 *buf, u16 len) #define dump_fifo_data(buf, len) do {} while (0) #endif -#ifdef CONFIG_BF52x #define USB_DMA_BASE USB_DMA_INTERRUPT #define USB_DMAx_CTRL 0x04 @@ -42,7 +78,6 @@ static void dump_fifo_data(u8 *buf, u16 len) #define USB_DMAx_COUNT_HIGH 0x14 #define USB_DMA_REG(ep, reg) (USB_DMA_BASE + 0x20 * ep + reg) -#endif /* Almost 1 second */ #define TIMER_DELAY (1 * HZ) |