diff options
Diffstat (limited to 'drivers/usb/musb/musb_host.c')
-rw-r--r-- | drivers/usb/musb/musb_host.c | 159 |
1 files changed, 102 insertions, 57 deletions
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 3133990f04e..e45e70bcc5e 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -378,6 +378,19 @@ musb_giveback(struct musb_qh *qh, struct urb *urb, int status) switch (qh->type) { + case USB_ENDPOINT_XFER_CONTROL: + case USB_ENDPOINT_XFER_BULK: + /* fifo policy for these lists, except that NAKing + * should rotate a qh to the end (for fairness). + */ + if (qh->mux == 1) { + head = qh->ring.prev; + list_del(&qh->ring); + kfree(qh); + qh = first_qh(head); + break; + } + case USB_ENDPOINT_XFER_ISOC: case USB_ENDPOINT_XFER_INT: /* this is where periodic bandwidth should be @@ -388,17 +401,6 @@ musb_giveback(struct musb_qh *qh, struct urb *urb, int status) kfree(qh); qh = NULL; break; - - case USB_ENDPOINT_XFER_CONTROL: - case USB_ENDPOINT_XFER_BULK: - /* fifo policy for these lists, except that NAKing - * should rotate a qh to the end (for fairness). - */ - head = qh->ring.prev; - list_del(&qh->ring); - kfree(qh); - qh = first_qh(head); - break; } } return qh; @@ -1507,10 +1509,29 @@ void musb_host_rx(struct musb *musb, u8 epnum) musb_writew(hw_ep->regs, MUSB_RXCSR, val); #ifdef CONFIG_USB_INVENTRA_DMA + if (usb_pipeisoc(pipe)) { + struct usb_iso_packet_descriptor *d; + + d = urb->iso_frame_desc + qh->iso_idx; + d->actual_length = xfer_len; + + /* even if there was an error, we did the dma + * for iso_frame_desc->length + */ + if (d->status != EILSEQ && d->status != -EOVERFLOW) + d->status = 0; + + if (++qh->iso_idx >= urb->number_of_packets) + done = true; + else + done = false; + + } else { /* done if urb buffer is full or short packet is recd */ done = (urb->actual_length + xfer_len >= urb->transfer_buffer_length || dma->actual_len < qh->maxpacket); + } /* send IN token for next packet, without AUTOREQ */ if (!done) { @@ -1547,7 +1568,8 @@ void musb_host_rx(struct musb *musb, u8 epnum) if (dma) { struct dma_controller *c; u16 rx_count; - int ret; + int ret, length; + dma_addr_t buf; rx_count = musb_readw(epio, MUSB_RXCOUNT); @@ -1560,6 +1582,35 @@ void musb_host_rx(struct musb *musb, u8 epnum) c = musb->dma_controller; + if (usb_pipeisoc(pipe)) { + int status = 0; + struct usb_iso_packet_descriptor *d; + + d = urb->iso_frame_desc + qh->iso_idx; + + if (iso_err) { + status = -EILSEQ; + urb->error_count++; + } + if (rx_count > d->length) { + if (status == 0) { + status = -EOVERFLOW; + urb->error_count++; + } + DBG(2, "** OVERFLOW %d into %d\n",\ + rx_count, d->length); + + length = d->length; + } else + length = rx_count; + d->status = status; + buf = urb->transfer_dma + d->offset; + } else { + length = rx_count; + buf = urb->transfer_dma + + urb->actual_length; + } + dma->desired_mode = 0; #ifdef USE_MODE1 /* because of the issue below, mode 1 will @@ -1571,6 +1622,12 @@ void musb_host_rx(struct musb *musb, u8 epnum) urb->actual_length) > qh->maxpacket) dma->desired_mode = 1; + if (rx_count < hw_ep->max_packet_sz_rx) { + length = rx_count; + dma->bDesiredMode = 0; + } else { + length = urb->transfer_buffer_length; + } #endif /* Disadvantage of using mode 1: @@ -1608,12 +1665,7 @@ void musb_host_rx(struct musb *musb, u8 epnum) */ ret = c->channel_program( dma, qh->maxpacket, - dma->desired_mode, - urb->transfer_dma - + urb->actual_length, - (dma->desired_mode == 0) - ? rx_count - : urb->transfer_buffer_length); + dma->desired_mode, buf, length); if (!ret) { c->channel_release(dma); @@ -1631,19 +1683,6 @@ void musb_host_rx(struct musb *musb, u8 epnum) } } - if (dma && usb_pipeisoc(pipe)) { - struct usb_iso_packet_descriptor *d; - int iso_stat = status; - - d = urb->iso_frame_desc + qh->iso_idx; - d->actual_length += xfer_len; - if (iso_err) { - iso_stat = -EILSEQ; - urb->error_count++; - } - d->status = iso_stat; - } - finish: urb->actual_length += xfer_len; qh->offset += xfer_len; @@ -1671,22 +1710,9 @@ static int musb_schedule( struct list_head *head = NULL; /* use fixed hardware for control and bulk */ - switch (qh->type) { - case USB_ENDPOINT_XFER_CONTROL: + if (qh->type == USB_ENDPOINT_XFER_CONTROL) { head = &musb->control; hw_ep = musb->control_ep; - break; - case USB_ENDPOINT_XFER_BULK: - hw_ep = musb->bulk_ep; - if (is_in) - head = &musb->in_bulk; - else - head = &musb->out_bulk; - break; - } - if (head) { - idle = list_empty(head); - list_add_tail(&qh->ring, head); goto success; } @@ -1725,19 +1751,34 @@ static int musb_schedule( else diff = hw_ep->max_packet_sz_tx - qh->maxpacket; - if (diff > 0 && best_diff > diff) { + if (diff >= 0 && best_diff > diff) { best_diff = diff; best_end = epnum; } } - if (best_end < 0) + /* use bulk reserved ep1 if no other ep is free */ + if (best_end > 0 && qh->type == USB_ENDPOINT_XFER_BULK) { + hw_ep = musb->bulk_ep; + if (is_in) + head = &musb->in_bulk; + else + head = &musb->out_bulk; + goto success; + } else if (best_end < 0) { return -ENOSPC; + } idle = 1; + qh->mux = 0; hw_ep = musb->endpoints + best_end; musb->periodic[best_end] = qh; DBG(4, "qh %p periodic slot %d\n", qh, best_end); success: + if (head) { + idle = list_empty(head); + list_add_tail(&qh->ring, head); + qh->mux = 1; + } qh->hw_ep = hw_ep; qh->hep->hcpriv = qh; if (idle) @@ -2015,11 +2056,13 @@ static int musb_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) sched = &musb->control; break; case USB_ENDPOINT_XFER_BULK: - if (usb_pipein(urb->pipe)) - sched = &musb->in_bulk; - else - sched = &musb->out_bulk; - break; + if (qh->mux == 1) { + if (usb_pipein(urb->pipe)) + sched = &musb->in_bulk; + else + sched = &musb->out_bulk; + break; + } default: /* REVISIT when we get a schedule tree, periodic * transfers won't always be at the head of a @@ -2067,11 +2110,13 @@ musb_h_disable(struct usb_hcd *hcd, struct usb_host_endpoint *hep) sched = &musb->control; break; case USB_ENDPOINT_XFER_BULK: - if (is_in) - sched = &musb->in_bulk; - else - sched = &musb->out_bulk; - break; + if (qh->mux == 1) { + if (is_in) + sched = &musb->in_bulk; + else + sched = &musb->out_bulk; + break; + } default: /* REVISIT when we get a schedule tree, periodic transfers * won't always be at the head of a singleton queue... |