summaryrefslogtreecommitdiffstats
path: root/drivers/usb/musb
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/musb')
-rw-r--r--drivers/usb/musb/Kconfig12
-rw-r--r--drivers/usb/musb/Makefile8
-rw-r--r--drivers/usb/musb/blackfin.c320
-rw-r--r--drivers/usb/musb/blackfin.h52
-rw-r--r--drivers/usb/musb/davinci.c18
-rw-r--r--drivers/usb/musb/musb_core.c84
-rw-r--r--drivers/usb/musb/musb_core.h73
-rw-r--r--drivers/usb/musb/musb_gadget.c2
-rw-r--r--drivers/usb/musb/musb_host.c45
-rw-r--r--drivers/usb/musb/musb_io.h26
-rw-r--r--drivers/usb/musb/musb_regs.h397
-rw-r--r--drivers/usb/musb/musbhsdma.c84
-rw-r--r--drivers/usb/musb/musbhsdma.h149
-rw-r--r--drivers/usb/musb/omap2430.c15
-rw-r--r--drivers/usb/musb/tusb6010.c7
15 files changed, 1043 insertions, 249 deletions
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index 4b9542bbb35..5af7379cd9a 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -11,7 +11,7 @@ config USB_MUSB_HDRC
depends on (USB || USB_GADGET) && HAVE_CLK
depends on !SUPERH
select TWL4030_USB if MACH_OMAP_3430SDP
- tristate 'Inventra Highspeed Dual Role Controller (TI, ...)'
+ tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)'
help
Say Y here if your system has a dual role high speed USB
controller based on the Mentor Graphics silicon IP. Then
@@ -22,6 +22,9 @@ config USB_MUSB_HDRC
Texas Instruments parts using this IP include DaVinci 644x,
OMAP 243x, OMAP 343x, and TUSB 6010.
+ Analog Devices parts using this IP include Blackfin BF54x,
+ BF525 and BF527.
+
If you do not know what this is, please say N.
To compile this driver as a module, choose M here; the
@@ -33,6 +36,8 @@ config USB_MUSB_SOC
default y if ARCH_DAVINCI
default y if ARCH_OMAP2430
default y if ARCH_OMAP34XX
+ default y if (BF54x && !BF544)
+ default y if (BF52x && !BF522 && !BF523)
comment "DaVinci 644x USB support"
depends on USB_MUSB_HDRC && ARCH_DAVINCI
@@ -43,6 +48,9 @@ comment "OMAP 243x high speed USB support"
comment "OMAP 343x high speed USB support"
depends on USB_MUSB_HDRC && ARCH_OMAP34XX
+comment "Blackfin high speed USB Support"
+ depends on USB_MUSB_HDRC && (BF54x && !BF544) || (BF52x && !BF522 && !BF523)
+
config USB_TUSB6010
boolean "TUSB 6010 support"
depends on USB_MUSB_HDRC && !USB_MUSB_SOC
@@ -142,7 +150,7 @@ config MUSB_PIO_ONLY
config USB_INVENTRA_DMA
bool
depends on USB_MUSB_HDRC && !MUSB_PIO_ONLY
- default ARCH_OMAP2430 || ARCH_OMAP34XX
+ default ARCH_OMAP2430 || ARCH_OMAP34XX || BLACKFIN
help
Enable DMA transfers using Mentor's engine.
diff --git a/drivers/usb/musb/Makefile b/drivers/usb/musb/Makefile
index b6af0d687a7..85710ccc188 100644
--- a/drivers/usb/musb/Makefile
+++ b/drivers/usb/musb/Makefile
@@ -22,6 +22,14 @@ ifeq ($(CONFIG_ARCH_OMAP3430),y)
musb_hdrc-objs += omap2430.o
endif
+ifeq ($(CONFIG_BF54x),y)
+ musb_hdrc-objs += blackfin.o
+endif
+
+ifeq ($(CONFIG_BF52x),y)
+ musb_hdrc-objs += blackfin.o
+endif
+
ifeq ($(CONFIG_USB_GADGET_MUSB_HDRC),y)
musb_hdrc-objs += musb_gadget_ep0.o musb_gadget.o
endif
diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c
new file mode 100644
index 00000000000..78613485209
--- /dev/null
+++ b/drivers/usb/musb/blackfin.c
@@ -0,0 +1,320 @@
+/*
+ * MUSB OTG controller driver for Blackfin Processors
+ *
+ * Copyright 2006-2008 Analog Devices Inc.
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/clk.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+
+#include <asm/cacheflush.h>
+
+#include "musb_core.h"
+#include "blackfin.h"
+
+/*
+ * Load an endpoint's FIFO
+ */
+void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src)
+{
+ void __iomem *fifo = hw_ep->fifo;
+ void __iomem *epio = hw_ep->regs;
+
+ prefetch((u8 *)src);
+
+ musb_writew(epio, MUSB_TXCOUNT, len);
+
+ DBG(4, "TX ep%d fifo %p count %d buf %p, epio %p\n",
+ hw_ep->epnum, fifo, len, src, epio);
+
+ dump_fifo_data(src, len);
+
+ if (unlikely((unsigned long)src & 0x01))
+ outsw_8((unsigned long)fifo, src,
+ len & 0x01 ? (len >> 1) + 1 : len >> 1);
+ else
+ outsw((unsigned long)fifo, src,
+ len & 0x01 ? (len >> 1) + 1 : len >> 1);
+}
+
+/*
+ * Unload an endpoint's FIFO
+ */
+void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst)
+{
+ void __iomem *fifo = hw_ep->fifo;
+ u8 epnum = hw_ep->epnum;
+ u16 dma_reg = 0;
+
+ DBG(4, "%cX ep%d fifo %p count %d buf %p\n",
+ 'R', hw_ep->epnum, fifo, len, dst);
+
+#ifdef CONFIG_BF52x
+ invalidate_dcache_range((unsigned int)dst,
+ (unsigned int)(dst + len));
+
+ /* Setup DMA address register */
+ dma_reg = (u16) ((u32) dst & 0xFFFF);
+ bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_LOW), dma_reg);
+ SSYNC();
+
+ dma_reg = (u16) (((u32) dst >> 16) & 0xFFFF);
+ bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_HIGH), dma_reg);
+ SSYNC();
+
+ /* Setup DMA count register */
+ bfin_write16(USB_DMA_REG(epnum, USB_DMAx_COUNT_LOW), len);
+ bfin_write16(USB_DMA_REG(epnum, USB_DMAx_COUNT_HIGH), 0);
+ SSYNC();
+
+ /* Enable the DMA */
+ dma_reg = (epnum << 4) | DMA_ENA | INT_ENA;
+ bfin_write16(USB_DMA_REG(epnum, USB_DMAx_CTRL), dma_reg);
+ SSYNC();
+
+ /* Wait for compelete */
+ while (!(bfin_read_USB_DMA_INTERRUPT() & (1 << epnum)))
+ cpu_relax();
+
+ /* acknowledge dma interrupt */
+ bfin_write_USB_DMA_INTERRUPT(1 << epnum);
+ SSYNC();
+
+ /* Reset DMA */
+ bfin_write16(USB_DMA_REG(epnum, USB_DMAx_CTRL), 0);
+ SSYNC();
+#else
+ if (unlikely((unsigned long)dst & 0x01))
+ insw_8((unsigned long)fifo, dst,
+ len & 0x01 ? (len >> 1) + 1 : len >> 1);
+ else
+ insw((unsigned long)fifo, dst,
+ len & 0x01 ? (len >> 1) + 1 : len >> 1);
+#endif
+
+ dump_fifo_data(dst, len);
+}
+
+static irqreturn_t blackfin_interrupt(int irq, void *__hci)
+{
+ unsigned long flags;
+ irqreturn_t retval = IRQ_NONE;
+ struct musb *musb = __hci;
+
+ spin_lock_irqsave(&musb->lock, flags);
+
+ musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB);
+ musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX);
+ musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX);
+
+ if (musb->int_usb || musb->int_tx || musb->int_rx) {
+ musb_writeb(musb->mregs, MUSB_INTRUSB, musb->int_usb);
+ musb_writew(musb->mregs, MUSB_INTRTX, musb->int_tx);
+ musb_writew(musb->mregs, MUSB_INTRRX, musb->int_rx);
+ retval = musb_interrupt(musb);
+ }
+
+ spin_unlock_irqrestore(&musb->lock, flags);
+
+ /* REVISIT we sometimes get spurious IRQs on g_ep0
+ * not clear why... fall in BF54x too.
+ */
+ if (retval != IRQ_HANDLED)
+ DBG(5, "spurious?\n");
+
+ return IRQ_HANDLED;
+}
+
+static void musb_conn_timer_handler(unsigned long _musb)
+{
+ struct musb *musb = (void *)_musb;
+ unsigned long flags;
+ u16 val;
+
+ spin_lock_irqsave(&musb->lock, flags);
+ switch (musb->xceiv.state) {
+ case OTG_STATE_A_IDLE:
+ case OTG_STATE_A_WAIT_BCON:
+ /* Start a new session */
+ val = musb_readw(musb->mregs, MUSB_DEVCTL);
+ val |= MUSB_DEVCTL_SESSION;
+ musb_writew(musb->mregs, MUSB_DEVCTL, val);
+
+ val = musb_readw(musb->mregs, MUSB_DEVCTL);
+ if (!(val & MUSB_DEVCTL_BDEVICE)) {
+ gpio_set_value(musb->config->gpio_vrsel, 1);
+ musb->xceiv.state = OTG_STATE_A_WAIT_BCON;
+ } else {
+ gpio_set_value(musb->config->gpio_vrsel, 0);
+
+ /* Ignore VBUSERROR and SUSPEND IRQ */
+ val = musb_readb(musb->mregs, MUSB_INTRUSBE);
+ val &= ~MUSB_INTR_VBUSERROR;
+ musb_writeb(musb->mregs, MUSB_INTRUSBE, val);
+
+ val = MUSB_INTR_SUSPEND | MUSB_INTR_VBUSERROR;
+ musb_writeb(musb->mregs, MUSB_INTRUSB, val);
+
+ val = MUSB_POWER_HSENAB;
+ musb_writeb(musb->mregs, MUSB_POWER, val);
+ }
+ mod_timer(&musb_conn_timer, jiffies + TIMER_DELAY);
+ break;
+
+ default:
+ DBG(1, "%s state not handled\n", otg_state_string(musb));
+ break;
+ }
+ spin_unlock_irqrestore(&musb->lock, flags);
+
+ DBG(4, "state is %s\n", otg_state_string(musb));
+}
+
+void musb_platform_enable(struct musb *musb)
+{
+ if (is_host_enabled(musb)) {
+ mod_timer(&musb_conn_timer, jiffies + TIMER_DELAY);
+ musb->a_wait_bcon = TIMER_DELAY;
+ }
+}
+
+void musb_platform_disable(struct musb *musb)
+{
+}
+
+static void bfin_vbus_power(struct musb *musb, int is_on, int sleeping)
+{
+}
+
+static void bfin_set_vbus(struct musb *musb, int is_on)
+{
+ if (is_on)
+ gpio_set_value(musb->config->gpio_vrsel, 1);
+ else
+ gpio_set_value(musb->config->gpio_vrsel, 0);
+
+ DBG(1, "VBUS %s, devctl %02x "
+ /* otg %3x conf %08x prcm %08x */ "\n",
+ otg_state_string(musb),
+ musb_readb(musb->mregs, MUSB_DEVCTL));
+}
+
+static int bfin_set_power(struct otg_transceiver *x, unsigned mA)
+{
+ return 0;
+}
+
+void musb_platform_try_idle(struct musb *musb, unsigned long timeout)
+{
+ if (is_host_enabled(musb))
+ mod_timer(&musb_conn_timer, jiffies + TIMER_DELAY);
+}
+
+int musb_platform_get_vbus_status(struct musb *musb)
+{
+ return 0;
+}
+
+void musb_platform_set_mode(struct musb *musb, u8 musb_mode)
+{
+}
+
+int __init musb_platform_init(struct musb *musb)
+{
+
+ /*
+ * Rev 1.0 BF549 EZ-KITs require PE7 to be high for both DEVICE
+ * and OTG HOST modes, while rev 1.1 and greater require PE7 to
+ * be low for DEVICE mode and high for HOST mode. We set it high
+ * here because we are in host mode
+ */
+
+ if (gpio_request(musb->config->gpio_vrsel, "USB_VRSEL")) {
+ printk(KERN_ERR "Failed ro request USB_VRSEL GPIO_%d \n",
+ musb->config->gpio_vrsel);
+ return -ENODEV;
+ }
+ gpio_direction_output(musb->config->gpio_vrsel, 0);
+
+ if (ANOMALY_05000346) {
+ bfin_write_USB_APHY_CALIB(ANOMALY_05000346_value);
+ SSYNC();
+ }
+
+ if (ANOMALY_05000347) {
+ bfin_write_USB_APHY_CNTRL(0x0);
+ SSYNC();
+ }
+
+ /* TODO
+ * Set SIC-IVG register
+ */
+
+ /* Configure PLL oscillator register */
+ bfin_write_USB_PLLOSC_CTRL(0x30a8);
+ SSYNC();
+
+ bfin_write_USB_SRP_CLKDIV((get_sclk()/1000) / 32 - 1);
+ SSYNC();
+
+ bfin_write_USB_EP_NI0_RXMAXP(64);
+ SSYNC();
+
+ bfin_write_USB_EP_NI0_TXMAXP(64);
+ SSYNC();
+
+ /* Route INTRUSB/INTR_RX/INTR_TX to USB_INT0*/
+ bfin_write_USB_GLOBINTR(0x7);
+ SSYNC();
+
+ bfin_write_USB_GLOBAL_CTL(GLOBAL_ENA | EP1_TX_ENA | EP2_TX_ENA |
+ EP3_TX_ENA | EP4_TX_ENA | EP5_TX_ENA |
+ EP6_TX_ENA | EP7_TX_ENA | EP1_RX_ENA |
+ EP2_RX_ENA | EP3_RX_ENA | EP4_RX_ENA |
+ EP5_RX_ENA | EP6_RX_ENA | EP7_RX_ENA);
+ SSYNC();
+
+ if (is_host_enabled(musb)) {
+ musb->board_set_vbus = bfin_set_vbus;
+ setup_timer(&musb_conn_timer,
+ musb_conn_timer_handler, (unsigned long) musb);
+ }
+ if (is_peripheral_enabled(musb))
+ musb->xceiv.set_power = bfin_set_power;
+
+ musb->isr = blackfin_interrupt;
+
+ return 0;
+}
+
+int musb_platform_suspend(struct musb *musb)
+{
+ return 0;
+}
+
+int musb_platform_resume(struct musb *musb)
+{
+ return 0;
+}
+
+
+int musb_platform_exit(struct musb *musb)
+{
+
+ bfin_vbus_power(musb, 0 /*off*/, 1);
+ gpio_free(musb->config->gpio_vrsel);
+ musb_platform_suspend(musb);
+
+ return 0;
+}
diff --git a/drivers/usb/musb/blackfin.h b/drivers/usb/musb/blackfin.h
new file mode 100644
index 00000000000..a240c1e53d1
--- /dev/null
+++ b/drivers/usb/musb/blackfin.h
@@ -0,0 +1,52 @@
+/*
+ * Copyright (C) 2007 by Analog Devices, Inc.
+ *
+ * The Inventra Controller Driver for Linux is free software; you
+ * can redistribute it and/or modify it under the terms of the GNU
+ * General Public License version 2 as published by the Free Software
+ * Foundation.
+ */
+
+#ifndef __MUSB_BLACKFIN_H__
+#define __MUSB_BLACKFIN_H__
+
+/*
+ * Blackfin specific definitions
+ */
+
+#undef DUMP_FIFO_DATA
+#ifdef DUMP_FIFO_DATA
+static void dump_fifo_data(u8 *buf, u16 len)
+{
+ u8 *tmp = buf;
+ int i;
+
+ for (i = 0; i < len; i++) {
+ if (!(i % 16) && i)
+ pr_debug("\n");
+ pr_debug("%02x ", *tmp++);
+ }
+ pr_debug("\n");
+}
+#else
+#define dump_fifo_data(buf, len) do {} while (0)
+#endif
+
+#ifdef CONFIG_BF52x
+
+#define USB_DMA_BASE USB_DMA_INTERRUPT
+#define USB_DMAx_CTRL 0x04
+#define USB_DMAx_ADDR_LOW 0x08
+#define USB_DMAx_ADDR_HIGH 0x0C
+#define USB_DMAx_COUNT_LOW 0x10
+#define USB_DMAx_COUNT_HIGH 0x14
+
+#define USB_DMA_REG(ep, reg) (USB_DMA_BASE + 0x20 * ep + reg)
+#endif
+
+/* Almost 1 second */
+#define TIMER_DELAY (1 * HZ)
+
+static struct timer_list musb_conn_timer;
+
+#endif /* __MUSB_BLACKFIN_H__ */
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index dfb3bcbe00f..0d566dc5ce0 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -32,9 +32,9 @@
#include <linux/io.h>
#include <linux/gpio.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/memory.h>
-#include <asm/arch/gpio.h>
+#include <mach/arch/hardware.h>
+#include <mach/arch/memory.h>
+#include <mach/arch/gpio.h>
#include <asm/mach-types.h>
#include "musb_core.h"
@@ -364,6 +364,18 @@ static irqreturn_t davinci_interrupt(int irq, void *__hci)
return IRQ_HANDLED;
}
+int musb_platform_set_mode(struct musb *musb, u8 mode)
+{
+ /* EVM can't do this (right?) */
+ return -EIO;
+}
+
+int musb_platform_set_mode(struct musb *musb, u8 mode)
+{
+ /* EVM can't do this (right?) */
+ return -EIO;
+}
+
int __init musb_platform_init(struct musb *musb)
{
void __iomem *tibase = musb->ctrl_base;
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 5280dba9b1f..6c7faacfb53 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -148,7 +148,8 @@ static inline struct musb *dev_to_musb(struct device *dev)
/*-------------------------------------------------------------------------*/
-#ifndef CONFIG_USB_TUSB6010
+#if !defined(CONFIG_USB_TUSB6010) && !defined(CONFIG_BLACKFIN)
+
/*
* Load an endpoint's FIFO
*/
@@ -1124,25 +1125,25 @@ fifo_setup(struct musb *musb, struct musb_hw_ep *hw_ep,
#endif
switch (cfg->style) {
case FIFO_TX:
- musb_writeb(mbase, MUSB_TXFIFOSZ, c_size);
- musb_writew(mbase, MUSB_TXFIFOADD, c_off);
+ musb_write_txfifosz(mbase, c_size);
+ musb_write_txfifoadd(mbase, c_off);
hw_ep->tx_double_buffered = !!(c_size & MUSB_FIFOSZ_DPB);
hw_ep->max_packet_sz_tx = maxpacket;
break;
case FIFO_RX:
- musb_writeb(mbase, MUSB_RXFIFOSZ, c_size);
- musb_writew(mbase, MUSB_RXFIFOADD, c_off);
+ musb_write_rxfifosz(mbase, c_size);
+ musb_write_rxfifoadd(mbase, c_off);
hw_ep->rx_double_buffered = !!(c_size & MUSB_FIFOSZ_DPB);
hw_ep->max_packet_sz_rx = maxpacket;
break;
case FIFO_RXTX:
- musb_writeb(mbase, MUSB_TXFIFOSZ, c_size);
- musb_writew(mbase, MUSB_TXFIFOADD, c_off);
+ musb_write_txfifosz(mbase, c_size);
+ musb_write_txfifoadd(mbase, c_off);
hw_ep->rx_double_buffered = !!(c_size & MUSB_FIFOSZ_DPB);
hw_ep->max_packet_sz_rx = maxpacket;
- musb_writeb(mbase, MUSB_RXFIFOSZ, c_size);
- musb_writew(mbase, MUSB_RXFIFOADD, c_off);
+ musb_write_rxfifosz(mbase, c_size);
+ musb_write_rxfifoadd(mbase, c_off);
hw_ep->tx_double_buffered = hw_ep->rx_double_buffered;
hw_ep->max_packet_sz_tx = maxpacket;
@@ -1212,7 +1213,7 @@ static int __init ep_config_from_table(struct musb *musb)
if (epn >= musb->config->num_eps) {
pr_debug("%s: invalid ep %d\n",
musb_driver_name, epn);
- continue;
+ return -EINVAL;
}
offset = fifo_setup(musb, hw_ep + epn, cfg++, offset);
if (offset < 0) {
@@ -1246,9 +1247,10 @@ static int __init ep_config_from_table(struct musb *musb)
*/
static int __init ep_config_from_hw(struct musb *musb)
{
- u8 epnum = 0, reg;
+ u8 epnum = 0;
struct musb_hw_ep *hw_ep;
void *mbase = musb->mregs;
+ int ret = 0;
DBG(2, "<== static silicon ep config\n");
@@ -1258,26 +1260,9 @@ static int __init ep_config_from_hw(struct musb *musb)
musb_ep_select(mbase, epnum);
hw_ep = musb->endpoints + epnum;
- /* read from core using indexed model */
- reg = musb_readb(hw_ep->regs, 0x10 + MUSB_FIFOSIZE);
- if (!reg) {
- /* 0's returned when no more endpoints */
+ ret = musb_read_fifosize(musb, hw_ep, epnum);
+ if (ret < 0)
break;
- }
- musb->nr_endpoints++;
- musb->epmask |= (1 << epnum);
-
- hw_ep->max_packet_sz_tx = 1 << (reg & 0x0f);
-
- /* shared TX/RX FIFO? */
- if ((reg & 0xf0) == 0xf0) {
- hw_ep->max_packet_sz_rx = hw_ep->max_packet_sz_tx;
- hw_ep->is_shared_fifo = true;
- continue;
- } else {
- hw_ep->max_packet_sz_rx = 1 << ((reg & 0xf0) >> 4);
- hw_ep->is_shared_fifo = false;
- }
/* FIXME set up hw_ep->{rx,tx}_double_buffered */
@@ -1326,7 +1311,7 @@ static int __init musb_core_init(u16 musb_type, struct musb *musb)
/* log core options (read using indexed model) */
musb_ep_select(mbase, 0);
- reg = musb_readb(mbase, 0x10 + MUSB_CONFIGDATA);
+ reg = musb_read_configdata(mbase);
strcpy(aInfo, (reg & MUSB_CONFIGDATA_UTMIDW) ? "UTMI-16" : "UTMI-8");
if (reg & MUSB_CONFIGDATA_DYNFIFO)
@@ -1391,7 +1376,7 @@ static int __init musb_core_init(u16 musb_type, struct musb *musb)
}
/* log release info */
- hwvers = musb_readw(mbase, MUSB_HWVERS);
+ hwvers = musb_read_hwvers(mbase);
rev_major = (hwvers >> 10) & 0x1f;
rev_minor = hwvers & 0x3ff;
snprintf(aRevision, 32, "%d.%d%s", rev_major,
@@ -1400,8 +1385,7 @@ static int __init musb_core_init(u16 musb_type, struct musb *musb)
musb_driver_name, type, aRevision, aDate);
/* configure ep0 */
- musb->endpoints[0].max_packet_sz_tx = MUSB_EP0_FIFOSIZE;
- musb->endpoints[0].max_packet_sz_rx = MUSB_EP0_FIFOSIZE;
+ musb_configure_ep0(musb);
/* discover endpoint configuration */
musb->nr_endpoints = 1;
@@ -1445,7 +1429,7 @@ static int __init musb_core_init(u16 musb_type, struct musb *musb)
hw_ep->regs = MUSB_EP_OFFSET(i, 0) + mbase;
#ifdef CONFIG_USB_MUSB_HDRC_HCD
- hw_ep->target_regs = MUSB_BUSCTL_OFFSET(i, 0) + mbase;
+ hw_ep->target_regs = musb_read_target_reg_base(i, mbase);
hw_ep->rx_reinit = 1;
hw_ep->tx_reinit = 1;
#endif
@@ -1671,17 +1655,20 @@ musb_mode_store(struct device *dev, struct device_attribute *attr,
{
struct musb *musb = dev_to_musb(dev);
unsigned long flags;
+ int status;
spin_lock_irqsave(&musb->lock, flags);
- if (!strncmp(buf, "host", 4))
- musb_platform_set_mode(musb, MUSB_HOST);
- if (!strncmp(buf, "peripheral", 10))
- musb_platform_set_mode(musb, MUSB_PERIPHERAL);
- if (!strncmp(buf, "otg", 3))
- musb_platform_set_mode(musb, MUSB_OTG);
+ if (sysfs_streq(buf, "host"))
+ status = musb_platform_set_mode(musb, MUSB_HOST);
+ else if (sysfs_streq(buf, "peripheral"))
+ status = musb_platform_set_mode(musb, MUSB_PERIPHERAL);
+ else if (sysfs_streq(buf, "otg"))
+ status = musb_platform_set_mode(musb, MUSB_OTG);
+ else
+ status = -EINVAL;
spin_unlock_irqrestore(&musb->lock, flags);
- return n;
+ return (status == 0) ? n : status;
}
static DEVICE_ATTR(mode, 0644, musb_mode_show, musb_mode_store);
@@ -1781,7 +1768,7 @@ allocate_instance(struct device *dev,
#ifdef CONFIG_USB_MUSB_HDRC_HCD
struct usb_hcd *hcd;
- hcd = usb_create_hcd(&musb_hc_driver, dev, dev->bus_id);
+ hcd = usb_create_hcd(&musb_hc_driver, dev, dev_name(dev));
if (!hcd)
return NULL;
/* usbcore sets dev->driver_data to hcd, and sometimes uses that... */
@@ -1810,7 +1797,6 @@ allocate_instance(struct device *dev,
for (epnum = 0, ep = musb->endpoints;
epnum < musb->config->num_eps;
epnum++, ep++) {
-
ep->musb = musb;
ep->epnum = epnum;
}
@@ -1838,7 +1824,7 @@ static void musb_free(struct musb *musb)
musb_gadget_cleanup(musb);
#endif
- if (musb->nIrq >= 0) {
+ if (musb->nIrq >= 0 && musb->irq_wake) {
disable_irq_wake(musb->nIrq);
free_irq(musb->nIrq, musb);
}
@@ -1984,15 +1970,19 @@ bad_config:
INIT_WORK(&musb->irq_work, musb_irq_work);
/* attach to the IRQ */
- if (request_irq(nIrq, musb->isr, 0, dev->bus_id, musb)) {
+ if (request_irq(nIrq, musb->isr, 0, dev_name(dev), musb)) {
dev_err(dev, "request_irq %d failed!\n", nIrq);
status = -ENODEV;
goto fail2;
}
musb->nIrq = nIrq;
/* FIXME this handles wakeup irqs wrong */
- if (enable_irq_wake(nIrq) == 0)
+ if (enable_irq_wake(nIrq) == 0) {
+ musb->irq_wake = 1;
device_init_wakeup(dev, 1);
+ } else {
+ musb->irq_wake = 0;
+ }
pr_info("%s: USB %s mode controller at %p using %s, IRQ %d\n",
musb_driver_name,
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index 82227251931..630946a2d9f 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -191,7 +191,7 @@ enum musb_g_ep0_state {
*/
#if defined(CONFIG_ARCH_DAVINCI) || defined(CONFIG_ARCH_OMAP2430) \
- || defined(CONFIG_ARCH_OMAP3430)
+ || defined(CONFIG_ARCH_OMAP3430) || defined(CONFIG_BLACKFIN)
/* REVISIT indexed access seemed to
* misbehave (on DaVinci) for at least peripheral IN ...
*/
@@ -359,6 +359,7 @@ struct musb {
struct otg_transceiver xceiv;
int nIrq;
+ unsigned irq_wake:1;
struct musb_hw_ep endpoints[MUSB_C_NUM_EPS];
#define control_ep endpoints
@@ -447,6 +448,70 @@ static inline struct musb *gadget_to_musb(struct usb_gadget *g)
}
#endif
+#ifdef CONFIG_BLACKFIN
+static inline int musb_read_fifosize(struct musb *musb,
+ struct musb_hw_ep *hw_ep, u8 epnum)
+{
+ musb->nr_endpoints++;
+ musb->epmask |= (1 << epnum);
+
+ if (epnum < 5) {
+ hw_ep->max_packet_sz_tx = 128;
+ hw_ep->max_packet_sz_rx = 128;
+ } else {
+ hw_ep->max_packet_sz_tx = 1024;
+ hw_ep->max_packet_sz_rx = 1024;
+ }
+ hw_ep->is_shared_fifo = false;
+
+ return 0;
+}
+
+static inline void musb_configure_ep0(struct musb *musb)
+{
+ musb->endpoints[0].max_packet_sz_tx = MUSB_EP0_FIFOSIZE;
+ musb->endpoints[0].max_packet_sz_rx = MUSB_EP0_FIFOSIZE;
+ musb->endpoints[0].is_shared_fifo = true;
+}
+
+#else
+
+static inline int musb_read_fifosize(struct musb *musb,
+ struct musb_hw_ep *hw_ep, u8 epnum)
+{
+ u8 reg = 0;
+
+ /* read from core using indexed model */
+ reg = musb_readb(hw_ep->regs, 0x10 + MUSB_FIFOSIZE);
+ /* 0's returned when no more endpoints */
+ if (!reg)
+ return -ENODEV;
+
+ musb->nr_endpoints++;
+ musb->epmask |= (1 << epnum);
+
+ hw_ep->max_packet_sz_tx = 1 << (reg & 0x0f);
+
+ /* shared TX/RX FIFO? */
+ if ((reg & 0xf0) == 0xf0) {
+ hw_ep->max_packet_sz_rx = hw_ep->max_packet_sz_tx;
+ hw_ep->is_shared_fifo = true;
+ return 0;
+ } else {
+ hw_ep->max_packet_sz_rx = 1 << ((reg & 0xf0) >> 4);
+ hw_ep->is_shared_fifo = false;
+ }
+
+ return 0;
+}
+
+static inline void musb_configure_ep0(struct musb *musb)
+{
+ musb->endpoints[0].max_packet_sz_tx = MUSB_EP0_FIFOSIZE;
+ musb->endpoints[0].max_packet_sz_rx = MUSB_EP0_FIFOSIZE;
+}
+#endif /* CONFIG_BLACKFIN */
+
/***************************** Glue it together *****************************/
@@ -467,16 +532,16 @@ extern void musb_platform_disable(struct musb *musb);
extern void musb_hnp_stop(struct musb *musb);
-extern void musb_platform_set_mode(struct musb *musb, u8 musb_mode);
+extern int musb_platform_set_mode(struct musb *musb, u8 musb_mode);
-#if defined(CONFIG_USB_TUSB6010) || \
+#if defined(CONFIG_USB_TUSB6010) || defined(CONFIG_BLACKFIN) || \
defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP34XX)
extern void musb_platform_try_idle(struct musb *musb, unsigned long timeout);
#else
#define musb_platform_try_idle(x, y) do {} while (0)
#endif
-#ifdef CONFIG_USB_TUSB6010
+#if defined(CONFIG_USB_TUSB6010) || defined(CONFIG_BLACKFIN)
extern int musb_platform_get_vbus_status(struct musb *musb);
#else
#define musb_platform_get_vbus_status(x) 0
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index d6a802c224f..6197daeab8f 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -1633,7 +1633,7 @@ int __init musb_gadget_setup(struct musb *musb)
musb->g.speed = USB_SPEED_UNKNOWN;
/* this "gadget" abstracts/virtualizes the controller */
- strcpy(musb->g.dev.bus_id, "gadget");
+ dev_set_name(&musb->g.dev, "gadget");
musb->g.dev.parent = musb->controller;
musb->g.dev.dma_mask = musb->controller->dma_mask;
musb->g.dev.release = musb_gadget_release;
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index cc64462d4c4..99fa6123487 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -112,18 +112,21 @@ static void musb_h_tx_flush_fifo(struct musb_hw_ep *ep)
{
void __iomem *epio = ep->regs;
u16 csr;
+ u16 lastcsr = 0;
int retries = 1000;
csr = musb_readw(epio, MUSB_TXCSR);
while (csr & MUSB_TXCSR_FIFONOTEMPTY) {
- DBG(5, "Host TX FIFONOTEMPTY csr: %02x\n", csr);
+ if (csr != lastcsr)
+ DBG(3, "Host TX FIFONOTEMPTY csr: %02x\n", csr);
+ lastcsr = csr;
csr |= MUSB_TXCSR_FLUSHFIFO;
musb_writew(epio, MUSB_TXCSR, csr);
csr = musb_readw(epio, MUSB_TXCSR);
- if (retries-- < 1) {
- ERR("Could not flush host TX fifo: csr: %04x\n", csr);
+ if (WARN(retries-- < 1,
+ "Could not flush host TX%d fifo: csr: %04x\n",
+ ep->epnum, csr))
return;
- }
mdelay(1);
}
}
@@ -268,7 +271,7 @@ __musb_giveback(struct musb *musb, struct urb *urb, int status)
__releases(musb->lock)
__acquires(musb->lock)
{
- DBG(({ int level; switch (urb->status) {
+ DBG(({ int level; switch (status) {
case 0:
level = 4;
break;
@@ -283,8 +286,8 @@ __acquires(musb->lock)
level = 2;
break;
}; level; }),
- "complete %p (%d), dev%d ep%d%s, %d/%d\n",
- urb, urb->status,
+ "complete %p %pF (%d), dev%d ep%d%s, %d/%d\n",
+ urb, urb->complete, status,
usb_pipedevice(urb->pipe),
usb_pipeendpoint(urb->pipe),
usb_pipein(urb->pipe) ? "in" : "out",
@@ -593,12 +596,10 @@ musb_rx_reinit(struct musb *musb, struct musb_qh *qh, struct musb_hw_ep *ep)
/* target addr and (for multipoint) hub addr/port */
if (musb->is_multipoint) {
- musb_writeb(ep->target_regs, MUSB_RXFUNCADDR,
- qh->addr_reg);
- musb_writeb(ep->target_regs, MUSB_RXHUBADDR,
- qh->h_addr_reg);
- musb_writeb(ep->target_regs, MUSB_RXHUBPORT,
- qh->h_port_reg);
+ musb_write_rxfunaddr(ep->target_regs, qh->addr_reg);
+ musb_write_rxhubaddr(ep->target_regs, qh->h_addr_reg);
+ musb_write_rxhubport(ep->target_regs, qh->h_port_reg);
+
} else
musb_writeb(musb->mregs, MUSB_FADDR, qh->addr_reg);
@@ -712,15 +713,9 @@ static void musb_ep_program(struct musb *musb, u8 epnum,
/* target addr and (for multipoint) hub addr/port */
if (musb->is_multipoint) {
- musb_writeb(mbase,
- MUSB_BUSCTL_OFFSET(epnum, MUSB_TXFUNCADDR),
- qh->addr_reg);
- musb_writeb(mbase,
- MUSB_BUSCTL_OFFSET(epnum, MUSB_TXHUBADDR),
- qh->h_addr_reg);
- musb_writeb(mbase,
- MUSB_BUSCTL_OFFSET(epnum, MUSB_TXHUBPORT),
- qh->h_port_reg);
+ musb_write_txfunaddr(mbase, epnum, qh->addr_reg);
+ musb_write_txhubaddr(mbase, epnum, qh->h_addr_reg);
+ musb_write_txhubport(mbase, epnum, qh->h_port_reg);
/* FIXME if !epnum, do the same for RX ... */
} else
musb_writeb(mbase, MUSB_FADDR, qh->addr_reg);
@@ -988,8 +983,10 @@ static bool musb_h_ep0_continue(struct musb *musb, u16 len, struct urb *urb)
if (fifo_count) {
fifo_dest = (u8 *) (urb->transfer_buffer
+ urb->actual_length);
- DBG(3, "Sending %d bytes to %p\n",
- fifo_count, fifo_dest);
+ DBG(3, "Sending %d byte%s to ep0 fifo %p\n",
+ fifo_count,
+ (fifo_count == 1) ? "" : "s",
+ fifo_dest);
musb_write_fifo(hw_ep, fifo_count, fifo_dest);
urb->actual_length += fifo_count;
diff --git a/drivers/usb/musb/musb_io.h b/drivers/usb/musb/musb_io.h
index 223f0a51409..b06e9ef00cf 100644
--- a/drivers/usb/musb/musb_io.h
+++ b/drivers/usb/musb/musb_io.h
@@ -39,7 +39,7 @@
#if !defined(CONFIG_ARM) && !defined(CONFIG_SUPERH) \
&& !defined(CONFIG_AVR32) && !defined(CONFIG_PPC32) \
- && !defined(CONFIG_PPC64)
+ && !defined(CONFIG_PPC64) && !defined(CONFIG_BLACKFIN)
static inline void readsl(const void __iomem *addr, void *buf, int len)
{ insl((unsigned long)addr, buf, len); }
static inline void readsw(const void __iomem *addr, void *buf, int len)
@@ -56,6 +56,8 @@ static inline void writesb(const void __iomem *addr, const void *buf, int len)
#endif
+#ifndef CONFIG_BLACKFIN
+
/* NOTE: these offsets are all in bytes */
static inline u16 musb_readw(const void __iomem *addr, unsigned offset)
@@ -114,4 +116,26 @@ static inline void musb_writeb(void __iomem *addr, unsigned offset, u8 data)
#endif /* CONFIG_USB_TUSB6010 */
+#else
+
+static inline u8 musb_readb(const void __iomem *addr, unsigned offset)
+ { return (u8) (bfin_read16(addr + offset)); }
+
+static inline u16 musb_readw(const void __iomem *addr, unsigned offset)
+ { return bfin_read16(addr + offset); }
+
+static inline u32 musb_readl(const void __iomem *addr, unsigned offset)
+ { return (u32) (bfin_read16(addr + offset)); }
+
+static inline void musb_writeb(void __iomem *addr, unsigned offset, u8 data)
+ { bfin_write16(addr + offset, (u16) data); }
+
+static inline void musb_writew(void __iomem *addr, unsigned offset, u16 data)
+ { bfin_write16(addr + offset, data); }
+
+static inline void musb_writel(void __iomem *addr, unsigned offset, u32 data)
+ { bfin_write16(addr + offset, (u16) data); }
+
+#endif /* CONFIG_BLACKFIN */
+
#endif
diff --git a/drivers/usb/musb/musb_regs.h b/drivers/usb/musb/musb_regs.h
index 9c228661aa5..de3b2f18db4 100644
--- a/drivers/usb/musb/musb_regs.h
+++ b/drivers/usb/musb/musb_regs.h
@@ -38,97 +38,6 @@
#define MUSB_EP0_FIFOSIZE 64 /* This is non-configurable */
/*
- * Common USB registers
- */
-
-#define MUSB_FADDR 0x00 /* 8-bit */
-#define MUSB_POWER 0x01 /* 8-bit */
-
-#define MUSB_INTRTX 0x02 /* 16-bit */
-#define MUSB_INTRRX 0x04
-#define MUSB_INTRTXE 0x06
-#define MUSB_INTRRXE 0x08
-#define MUSB_INTRUSB 0x0A /* 8 bit */
-#define MUSB_INTRUSBE 0x0B /* 8 bit */
-#define MUSB_FRAME 0x0C
-#define MUSB_INDEX 0x0E /* 8 bit */
-#define MUSB_TESTMODE 0x0F /* 8 bit */
-
-/* Get offset for a given FIFO from musb->mregs */
-#ifdef CONFIG_USB_TUSB6010
-#define MUSB_FIFO_OFFSET(epnum) (0x200 + ((epnum) * 0x20))
-#else
-#define MUSB_FIFO_OFFSET(epnum) (0x20 + ((epnum) * 4))
-#endif
-
-/*
- * Additional Control Registers
- */
-
-#define MUSB_DEVCTL 0x60 /* 8 bit */
-
-/* These are always controlled through the INDEX register */
-#define MUSB_TXFIFOSZ 0x62 /* 8-bit (see masks) */
-#define MUSB_RXFIFOSZ 0x63 /* 8-bit (see masks) */
-#define MUSB_TXFIFOADD 0x64 /* 16-bit offset shifted right 3 */
-#define MUSB_RXFIFOADD 0x66 /* 16-bit offset shifted right 3 */
-
-/* REVISIT: vctrl/vstatus: optional vendor utmi+phy register at 0x68 */
-#define MUSB_HWVERS 0x6C /* 8 bit */
-
-#define MUSB_EPINFO 0x78 /* 8 bit */
-#define MUSB_RAMINFO 0x79 /* 8 bit */
-#define MUSB_LINKINFO 0x7a /* 8 bit */
-#define MUSB_VPLEN 0x7b /* 8 bit */
-#define MUSB_HS_EOF1 0x7c /* 8 bit */
-#define MUSB_FS_EOF1 0x7d /* 8 bit */
-#define MUSB_LS_EOF1 0x7e /* 8 bit */
-
-/* Offsets to endpoint registers */
-#define MUSB_TXMAXP 0x00
-#define MUSB_TXCSR 0x02
-#define MUSB_CSR0 MUSB_TXCSR /* Re-used for EP0 */
-#define MUSB_RXMAXP 0x04
-#define MUSB_RXCSR 0x06
-#define MUSB_RXCOUNT 0x08
-#define MUSB_COUNT0 MUSB_RXCOUNT /* Re-used for EP0 */
-#define MUSB_TXTYPE 0x0A
-#define MUSB_TYPE0 MUSB_TXTYPE /* Re-used for EP0 */
-#define MUSB_TXINTERVAL 0x0B
-#define MUSB_NAKLIMIT0 MUSB_TXINTERVAL /* Re-used for EP0 */
-#define MUSB_RXTYPE 0x0C
-#define MUSB_RXINTERVAL 0x0D
-#define MUSB_FIFOSIZE 0x0F
-#define MUSB_CONFIGDATA MUSB_FIFOSIZE /* Re-used for EP0 */
-
-/* Offsets to endpoint registers in indexed model (using INDEX register) */
-#define MUSB_INDEXED_OFFSET(_epnum, _offset) \
- (0x10 + (_offset))
-
-/* Offsets to endpoint registers in flat models */
-#define MUSB_FLAT_OFFSET(_epnum, _offset) \
- (0x100 + (0x10*(_epnum)) + (_offset))
-
-#ifdef CONFIG_USB_TUSB6010
-/* TUSB6010 EP0 configuration register is special */
-#define MUSB_TUSB_OFFSET(_epnum, _offset) \
- (0x10 + _offset)
-#include "tusb6010.h" /* Needed "only" for TUSB_EP0_CONF */
-#endif
-
-/* "bus control"/target registers, for host side multipoint (external hubs) */
-#define MUSB_TXFUNCADDR 0x00
-#define MUSB_TXHUBADDR 0x02
-#define MUSB_TXHUBPORT 0x03
-
-#define MUSB_RXFUNCADDR 0x04
-#define MUSB_RXHUBADDR 0x06
-#define MUSB_RXHUBPORT 0x07
-
-#define MUSB_BUSCTL_OFFSET(_epnum, _offset) \
- (0x80 + (8*(_epnum)) + (_offset))
-
-/*
* MUSB Register bits
*/
@@ -228,7 +137,6 @@
/* TXCSR in Peripheral and Host mode */
#define MUSB_TXCSR_AUTOSET 0x8000
-#define MUSB_TXCSR_MODE 0x2000
#define MUSB_TXCSR_DMAENAB 0x1000
#define MUSB_TXCSR_FRCDATATOG 0x0800
#define MUSB_TXCSR_DMAMODE 0x0400
@@ -297,4 +205,309 @@
/* HUBADDR */
#define MUSB_HUBADDR_MULTI_TT 0x80
+
+#ifndef CONFIG_BLACKFIN
+
+/*
+ * Common USB registers
+ */
+
+#define MUSB_FADDR 0x00 /* 8-bit */
+#define MUSB_POWER 0x01 /* 8-bit */
+
+#define MUSB_INTRTX 0x02 /* 16-bit */
+#define MUSB_INTRRX 0x04
+#define MUSB_INTRTXE 0x06
+#define MUSB_INTRRXE 0x08
+#define MUSB_INTRUSB 0x0A /* 8 bit */
+#define MUSB_INTRUSBE 0x0B /* 8 bit */
+#define MUSB_FRAME 0x0C
+#define MUSB_INDEX 0x0E /* 8 bit */
+#define MUSB_TESTMODE 0x0F /* 8 bit */
+
+/* Get offset for a given FIFO from musb->mregs */
+#ifdef CONFIG_USB_TUSB6010
+#define MUSB_FIFO_OFFSET(epnum) (0x200 + ((epnum) * 0x20))
+#else
+#define MUSB_FIFO_OFFSET(epnum) (0x20 + ((epnum) * 4))
+#endif
+
+/*
+ * Additional Control Registers
+ */
+
+#define MUSB_DEVCTL 0x60 /* 8 bit */
+
+/* These are always controlled through the INDEX register */
+#define MUSB_TXFIFOSZ 0x62 /* 8-bit (see masks) */
+#define MUSB_RXFIFOSZ 0x63 /* 8-bit (see masks) */
+#define MUSB_TXFIFOADD 0x64 /* 16-bit offset shifted right 3 */
+#define MUSB_RXFIFOADD 0x66 /* 16-bit offset shifted right 3 */
+
+/* REVISIT: vctrl/vstatus: optional vendor utmi+phy register at 0x68 */
+#define MUSB_HWVERS 0x6C /* 8 bit */
+
+#define MUSB_EPINFO 0x78 /* 8 bit */
+#define MUSB_RAMINFO 0x79 /* 8 bit */
+#define MUSB_LINKINFO 0x7a /* 8 bit */
+#define MUSB_VPLEN 0x7b /* 8 bit */
+#define MUSB_HS_EOF1 0x7c /* 8 bit */
+#define MUSB_FS_EOF1 0x7d /* 8 bit */
+#define MUSB_LS_EOF1 0x7e /* 8 bit */
+
+/* Offsets to endpoint registers */
+#define MUSB_TXMAXP 0x00
+#define MUSB_TXCSR 0x02
+#define MUSB_CSR0 MUSB_TXCSR /* Re-used for EP0 */
+#define MUSB_RXMAXP 0x04
+#define MUSB_RXCSR 0x06
+#define MUSB_RXCOUNT 0x08
+#define MUSB_COUNT0 MUSB_RXCOUNT /* Re-used for EP0 */
+#define MUSB_TXTYPE 0x0A
+#define MUSB_TYPE0 MUSB_TXTYPE /* Re-used for EP0 */
+#define MUSB_TXINTERVAL 0x0B
+#define MUSB_NAKLIMIT0 MUSB_TXINTERVAL /* Re-used for EP0 */
+#define MUSB_RXTYPE 0x0C
+#define MUSB_RXINTERVAL 0x0D
+#define MUSB_FIFOSIZE 0x0F
+#define MUSB_CONFIGDATA MUSB_FIFOSIZE /* Re-used for EP0 */
+
+/* Offsets to endpoint registers in indexed model (using INDEX register) */
+#define MUSB_INDEXED_OFFSET(_epnum, _offset) \
+ (0x10 + (_offset))
+
+/* Offsets to endpoint registers in flat models */
+#define MUSB_FLAT_OFFSET(_epnum, _offset) \
+ (0x100 + (0x10*(_epnum)) + (_offset))
+
+#ifdef CONFIG_USB_TUSB6010
+/* TUSB6010 EP0 configuration register is special */
+#define MUSB_TUSB_OFFSET(_epnum, _offset) \
+ (0x10 + _offset)
+#include "tusb6010.h" /* Needed "only" for TUSB_EP0_CONF */
+#endif
+
+#define MUSB_TXCSR_MODE 0x2000
+
+/* "bus control"/target registers, for host side multipoint (external hubs) */
+#define MUSB_TXFUNCADDR 0x00
+#define MUSB_TXHUBADDR 0x02
+#define MUSB_TXHUBPORT 0x03
+
+#define MUSB_RXFUNCADDR 0x04
+#define MUSB_RXHUBADDR 0x06
+#define MUSB_RXHUBPORT 0x07
+
+#define MUSB_BUSCTL_OFFSET(_epnum, _offset) \
+ (0x80 + (8*(_epnum)) + (_offset))
+
+static inline void musb_write_txfifosz(void __iomem *mbase, u8 c_size)
+{
+ musb_writeb(mbase, MUSB_TXFIFOSZ, c_size);
+}
+
+static inline void musb_write_txfifoadd(void __iomem *mbase, u16 c_off)
+{
+ musb_writew(mbase, MUSB_TXFIFOADD, c_off);
+}
+
+static inline void musb_write_rxfifosz(void __iomem *mbase, u8 c_size)
+{
+ musb_writeb(mbase, MUSB_RXFIFOSZ, c_size);
+}
+
+static inline void musb_write_rxfifoadd(void __iomem *mbase, u16 c_off)
+{
+ musb_writew(mbase, MUSB_RXFIFOADD, c_off);
+}
+
+static inline u8 musb_read_configdata(void __iomem *mbase)
+{
+ return musb_readb(mbase, 0x10 + MUSB_CONFIGDATA);
+}
+
+static inline u16 musb_read_hwvers(void __iomem *mbase)
+{
+ return musb_readw(mbase, MUSB_HWVERS);
+}
+
+static inline void __iomem *musb_read_target_reg_base(u8 i, void __iomem *mbase)
+{
+ return (MUSB_BUSCTL_OFFSET(i, 0) + mbase);
+}
+
+static inline void musb_write_rxfunaddr(void __iomem *ep_target_regs,
+ u8 qh_addr_reg)
+{
+ musb_writeb(ep_target_regs, MUSB_RXFUNCADDR, qh_addr_reg);
+}
+
+static inline void musb_write_rxhubaddr(void __iomem *ep_target_regs,
+ u8 qh_h_addr_reg)
+{
+ musb_writeb(ep_target_regs, MUSB_RXHUBADDR, qh_h_addr_reg);
+}
+
+static inline void musb_write_rxhubport(void __iomem *ep_target_regs,
+ u8 qh_h_port_reg)
+{
+ musb_writeb(ep_target_regs, MUSB_RXHUBPORT, qh_h_port_reg);
+}
+
+static inline void musb_write_txfunaddr(void __iomem *mbase, u8 epnum,
+ u8 qh_addr_reg)
+{
+ musb_writeb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_TXFUNCADDR),
+ qh_addr_reg);
+}
+
+static inline void musb_write_txhubaddr(void __iomem *mbase, u8 epnum,
+ u8 qh_addr_reg)
+{
+ musb_writeb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_TXHUBADDR),
+ qh_addr_reg);
+}
+
+static inline void musb_write_txhubport(void __iomem *mbase, u8 epnum,
+ u8 qh_h_port_reg)
+{
+ musb_writeb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_TXHUBPORT),
+ qh_h_port_reg);
+}
+
+#else /* CONFIG_BLACKFIN */
+
+#define USB_BASE USB_FADDR
+#define USB_OFFSET(reg) (reg - USB_BASE)
+
+/*
+ * Common USB registers
+ */
+#define MUSB_FADDR USB_OFFSET(USB_FADDR) /* 8-bit */
+#define MUSB_POWER USB_OFFSET(USB_POWER) /* 8-bit */
+#define MUSB_INTRTX USB_OFFSET(USB_INTRTX) /* 16-bit */
+#define MUSB_INTRRX USB_OFFSET(USB_INTRRX)
+#define MUSB_INTRTXE USB_OFFSET(USB_INTRTXE)
+#define MUSB_INTRRXE USB_OFFSET(USB_INTRRXE)
+#define MUSB_INTRUSB USB_OFFSET(USB_INTRUSB) /* 8 bit */
+#define MUSB_INTRUSBE USB_OFFSET(USB_INTRUSBE)/* 8 bit */
+#define MUSB_FRAME USB_OFFSET(USB_FRAME)
+#define MUSB_INDEX USB_OFFSET(USB_INDEX) /* 8 bit */
+#define MUSB_TESTMODE USB_OFFSET(USB_TESTMODE)/* 8 bit */
+
+/* Get offset for a given FIFO from musb->mregs */
+#define MUSB_FIFO_OFFSET(epnum) \
+ (USB_OFFSET(USB_EP0_FIFO) + ((epnum) * 8))
+
+/*
+ * Additional Control Registers
+ */
+
+#define MUSB_DEVCTL USB_OFFSET(USB_OTG_DEV_CTL) /* 8 bit */
+
+#define MUSB_LINKINFO USB_OFFSET(USB_LINKINFO)/* 8 bit */
+#define MUSB_VPLEN USB_OFFSET(USB_VPLEN) /* 8 bit */
+#define MUSB_HS_EOF1 USB_OFFSET(USB_HS_EOF1) /* 8 bit */
+#define MUSB_FS_EOF1 USB_OFFSET(USB_FS_EOF1) /* 8 bit */
+#define MUSB_LS_EOF1 USB_OFFSET(USB_LS_EOF1) /* 8 bit */
+
+/* Offsets to endpoint registers */
+#define MUSB_TXMAXP 0x00
+#define MUSB_TXCSR 0x04
+#define MUSB_CSR0 MUSB_TXCSR /* Re-used for EP0 */
+#define MUSB_RXMAXP 0x08
+#define MUSB_RXCSR 0x0C
+#define MUSB_RXCOUNT 0x10
+#define MUSB_COUNT0 MUSB_RXCOUNT /* Re-used for EP0 */
+#define MUSB_TXTYPE 0x14
+#define MUSB_TYPE0 MUSB_TXTYPE /* Re-used for EP0 */
+#define MUSB_TXINTERVAL 0x18
+#define MUSB_NAKLIMIT0 MUSB_TXINTERVAL /* Re-used for EP0 */
+#define MUSB_RXTYPE 0x1C
+#define MUSB_RXINTERVAL 0x20
+#define MUSB_TXCOUNT 0x28
+
+/* Offsets to endpoint registers in indexed model (using INDEX register) */
+#define MUSB_INDEXED_OFFSET(_epnum, _offset) \
+ (0x40 + (_offset))
+
+/* Offsets to endpoint registers in flat models */
+#define MUSB_FLAT_OFFSET(_epnum, _offset) \
+ (USB_OFFSET(USB_EP_NI0_TXMAXP) + (0x40 * (_epnum)) + (_offset))
+
+/* Not implemented - HW has seperate Tx/Rx FIFO */
+#define MUSB_TXCSR_MODE 0x0000
+
+/*
+ * Dummy stub for clk framework, it will be removed
+ * until Blackfin supports clk framework
+ */
+#define clk_get(dev, id) NULL
+#define clk_put(clock) do {} while (0)
+#define clk_enable(clock) do {} while (0)
+#define clk_disable(clock) do {} while (0)
+
+static inline void musb_write_txfifosz(void __iomem *mbase, u8 c_size)
+{
+}
+
+static inline void musb_write_txfifoadd(void __iomem *mbase, u16 c_off)
+{
+}
+
+static inline void musb_write_rxfifosz(void __iomem *mbase, u8 c_size)
+{
+}
+
+static inline void musb_write_rxfifoadd(void __iomem *mbase, u16 c_off)
+{
+}
+
+static inline u8 musb_read_configdata(void __iomem *mbase)
+{
+ return 0;
+}
+
+static inline u16 musb_read_hwvers(void __iomem *mbase)
+{
+ return 0;
+}
+
+static inline u16 musb_read_target_reg_base(u8 i, void __iomem *mbase)
+{
+ return 0;
+}
+
+static inline void musb_write_rxfunaddr(void __iomem *ep_target_regs,
+ u8 qh_addr_req)
+{
+}
+
+static inline void musb_write_rxhubaddr(void __iomem *ep_target_regs,
+ u8 qh_h_addr_reg)
+{
+}
+
+static inline void musb_write_rxhubport(void __iomem *ep_target_regs,
+ u8 qh_h_port_reg)
+{
+}
+
+static inline void musb_write_txfunaddr(void __iomem *mbase, u8 epnum,
+ u8 qh_addr_reg)
+{
+}
+
+static inline void musb_write_txhubaddr(void __iomem *mbase, u8 epnum,
+ u8 qh_addr_reg)
+{
+}
+
+static inline void musb_write_txhubport(void __iomem *mbase, u8 epnum,
+ u8 qh_h_port_reg)
+{
+}
+
+#endif /* CONFIG_BLACKFIN */
+
#endif /* __MUSB_REGS_H__ */
diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c
index 8c734ef2c1e..8662e9e159c 100644
--- a/drivers/usb/musb/musbhsdma.c
+++ b/drivers/usb/musb/musbhsdma.c
@@ -34,58 +34,7 @@
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include "musb_core.h"
-
-#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3430)
-#include "omap2430.h"
-#endif
-
-#define MUSB_HSDMA_BASE 0x200
-#define MUSB_HSDMA_INTR (MUSB_HSDMA_BASE + 0)
-#define MUSB_HSDMA_CONTROL 0x4
-#define MUSB_HSDMA_ADDRESS 0x8
-#define MUSB_HSDMA_COUNT 0xc
-
-#define MUSB_HSDMA_CHANNEL_OFFSET(_bchannel, _offset) \
- (MUSB_HSDMA_BASE + (_bchannel << 4) + _offset)
-
-/* control register (16-bit): */
-#define MUSB_HSDMA_ENABLE_SHIFT 0
-#define MUSB_HSDMA_TRANSMIT_SHIFT 1
-#define MUSB_HSDMA_MODE1_SHIFT 2
-#define MUSB_HSDMA_IRQENABLE_SHIFT 3
-#define MUSB_HSDMA_ENDPOINT_SHIFT 4
-#define MUSB_HSDMA_BUSERROR_SHIFT 8
-#define MUSB_HSDMA_BURSTMODE_SHIFT 9
-#define MUSB_HSDMA_BURSTMODE (3 << MUSB_HSDMA_BURSTMODE_SHIFT)
-#define MUSB_HSDMA_BURSTMODE_UNSPEC 0
-#define MUSB_HSDMA_BURSTMODE_INCR4 1
-#define MUSB_HSDMA_BURSTMODE_INCR8 2
-#define MUSB_HSDMA_BURSTMODE_INCR16 3
-
-#define MUSB_HSDMA_CHANNELS 8
-
-struct musb_dma_controller;
-
-struct musb_dma_channel {
- struct dma_channel channel;
- struct musb_dma_controller *controller;
- u32 start_addr;
- u32 len;
- u16 max_packet_sz;
- u8 idx;
- u8 epnum;
- u8 transmit;
-};
-
-struct musb_dma_controller {
- struct dma_controller controller;
- struct musb_dma_channel channel[MUSB_HSDMA_CHANNELS];
- void *private_data;
- void __iomem *base;
- u8 channel_count;
- u8 used_channels;
- u8 irq;
-};
+#include "musbhsdma.h"
static int dma_controller_start(struct dma_controller *c)
{
@@ -203,12 +152,8 @@ static void configure_channel(struct dma_channel *channel,
: 0);
/* address/count */
- musb_writel(mbase,
- MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDRESS),
- dma_addr);
- musb_writel(mbase,
- MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT),
- len);
+ musb_write_hsdma_addr(mbase, bchannel, dma_addr);
+ musb_write_hsdma_count(mbase, bchannel, len);
/* control (this should start things) */
musb_writew(mbase,
@@ -279,13 +224,8 @@ static int dma_channel_abort(struct dma_channel *channel)
musb_writew(mbase,
MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_CONTROL),
0);
- musb_writel(mbase,
- MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDRESS),
- 0);
- musb_writel(mbase,
- MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT),
- 0);
-
+ musb_write_hsdma_addr(mbase, bchannel, 0);
+ musb_write_hsdma_count(mbase, bchannel, 0);
channel->status = MUSB_DMA_STATUS_FREE;
}
@@ -333,10 +273,8 @@ static irqreturn_t dma_controller_irq(int irq, void *private_data)
} else {
u8 devctl;
- addr = musb_readl(mbase,
- MUSB_HSDMA_CHANNEL_OFFSET(
- bchannel,
- MUSB_HSDMA_ADDRESS));
+ addr = musb_read_hsdma_addr(mbase,
+ bchannel);
channel->actual_len = addr
- musb_channel->start_addr;
@@ -375,6 +313,12 @@ static irqreturn_t dma_controller_irq(int irq, void *private_data)
}
}
}
+
+#ifdef CONFIG_BLACKFIN
+ /* Clear DMA interrup flags */
+ musb_writeb(mbase, MUSB_HSDMA_INTR, int_hsdma);
+#endif
+
retval = IRQ_HANDLED;
done:
spin_unlock_irqrestore(&musb->lock, flags);
@@ -424,7 +368,7 @@ dma_controller_create(struct musb *musb, void __iomem *base)
controller->controller.channel_abort = dma_channel_abort;
if (request_irq(irq, dma_controller_irq, IRQF_DISABLED,
- musb->controller->bus_id, &controller->controller)) {
+ dev_name(musb->controller), &controller->controller)) {
dev_err(dev, "request_irq %d failed!\n", irq);
dma_controller_destroy(&controller->controller);
diff --git a/drivers/usb/musb/musbhsdma.h b/drivers/usb/musb/musbhsdma.h
new file mode 100644
index 00000000000..1299d92dc83
--- /dev/null
+++ b/drivers/usb/musb/musbhsdma.h
@@ -0,0 +1,149 @@
+/*
+ * MUSB OTG driver - support for Mentor's DMA controller
+ *
+ * Copyright 2005 Mentor Graphics Corporation
+ * Copyright (C) 2005-2007 by Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3430)
+#include "omap2430.h"
+#endif
+
+#ifndef CONFIG_BLACKFIN
+
+#define MUSB_HSDMA_BASE 0x200
+#define MUSB_HSDMA_INTR (MUSB_HSDMA_BASE + 0)
+#define MUSB_HSDMA_CONTROL 0x4
+#define MUSB_HSDMA_ADDRESS 0x8
+#define MUSB_HSDMA_COUNT 0xc
+
+#define MUSB_HSDMA_CHANNEL_OFFSET(_bchannel, _offset) \
+ (MUSB_HSDMA_BASE + (_bchannel << 4) + _offset)
+
+#define musb_read_hsdma_addr(mbase, bchannel) \
+ musb_readl(mbase, \
+ MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDRESS))
+
+#define musb_write_hsdma_addr(mbase, bchannel, addr) \
+ musb_writel(mbase, \
+ MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDRESS), \
+ addr)
+
+#define musb_write_hsdma_count(mbase, bchannel, len) \
+ musb_writel(mbase, \
+ MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT), \
+ len)
+#else
+
+#define MUSB_HSDMA_BASE 0x400
+#define MUSB_HSDMA_INTR (MUSB_HSDMA_BASE + 0)
+#define MUSB_HSDMA_CONTROL 0x04
+#define MUSB_HSDMA_ADDR_LOW 0x08
+#define MUSB_HSDMA_ADDR_HIGH 0x0C
+#define MUSB_HSDMA_COUNT_LOW 0x10
+#define MUSB_HSDMA_COUNT_HIGH 0x14
+
+#define MUSB_HSDMA_CHANNEL_OFFSET(_bchannel, _offset) \
+ (MUSB_HSDMA_BASE + (_bchannel * 0x20) + _offset)
+
+static inline u32 musb_read_hsdma_addr(void __iomem *mbase, u8 bchannel)
+{
+ u32 addr = musb_readw(mbase,
+ MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDR_HIGH));
+
+ addr = addr << 16;
+
+ addr |= musb_readw(mbase,
+ MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDR_LOW));
+
+ return addr;
+}
+
+static inline void musb_write_hsdma_addr(void __iomem *mbase,
+ u8 bchannel, dma_addr_t dma_addr)
+{
+ musb_writew(mbase,
+ MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDR_LOW),
+ ((u16)((u32) dma_addr & 0xFFFF)));
+ musb_writew(mbase,
+ MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDR_HIGH),
+ ((u16)(((u32) dma_addr >> 16) & 0xFFFF)));
+}
+
+static inline void musb_write_hsdma_count(void __iomem *mbase,
+ u8 bchannel, u32 len)
+{
+ musb_writew(mbase,
+ MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_LOW),
+ ((u16)((u32) len & 0xFFFF)));
+ musb_writew(mbase,
+ MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_HIGH),
+ ((u16)(((u32) len >> 16) & 0xFFFF)));
+}
+
+#endif /* CONFIG_BLACKFIN */
+
+/* control register (16-bit): */
+#define MUSB_HSDMA_ENABLE_SHIFT 0
+#define MUSB_HSDMA_TRANSMIT_SHIFT 1
+#define MUSB_HSDMA_MODE1_SHIFT 2
+#define MUSB_HSDMA_IRQENABLE_SHIFT 3
+#define MUSB_HSDMA_ENDPOINT_SHIFT 4
+#define MUSB_HSDMA_BUSERROR_SHIFT 8
+#define MUSB_HSDMA_BURSTMODE_SHIFT 9
+#define MUSB_HSDMA_BURSTMODE (3 << MUSB_HSDMA_BURSTMODE_SHIFT)
+#define MUSB_HSDMA_BURSTMODE_UNSPEC 0
+#define MUSB_HSDMA_BURSTMODE_INCR4 1
+#define MUSB_HSDMA_BURSTMODE_INCR8 2
+#define MUSB_HSDMA_BURSTMODE_INCR16 3
+
+#define MUSB_HSDMA_CHANNELS 8
+
+struct musb_dma_controller;
+
+struct musb_dma_channel {
+ struct dma_channel channel;
+ struct musb_dma_controller *controller;
+ u32 start_addr;
+ u32 len;
+ u16 max_packet_sz;
+ u8 idx;
+ u8 epnum;
+ u8 transmit;
+};
+
+struct musb_dma_controller {
+ struct dma_controller controller;
+ struct musb_dma_channel channel[MUSB_HSDMA_CHANNELS];
+ void *private_data;
+ void __iomem *base;
+ u8 channel_count;
+ u8 used_channels;
+ u8 irq;
+};
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index ce6c162920f..901dffdf23b 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -58,10 +58,10 @@ static void musb_do_idle(unsigned long _musb)
#endif
u8 devctl;
- devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
-
spin_lock_irqsave(&musb->lock, flags);
+ devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+
switch (musb->xceiv.state) {
case OTG_STATE_A_WAIT_BCON:
devctl &= ~MUSB_DEVCTL_SESSION;
@@ -196,7 +196,7 @@ static int omap_set_power(struct otg_transceiver *x, unsigned mA)
static int musb_platform_resume(struct musb *musb);
-void musb_platform_set_mode(struct musb *musb, u8 musb_mode)
+int musb_platform_set_mode(struct musb *musb, u8 musb_mode)
{
u8 devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
@@ -204,15 +204,24 @@ void musb_platform_set_mode(struct musb *musb, u8 musb_mode)
musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
switch (musb_mode) {
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
case MUSB_HOST:
otg_set_host(&musb->xceiv, musb->xceiv.host);
break;
+#endif
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
case MUSB_PERIPHERAL:
otg_set_peripheral(&musb->xceiv, musb->xceiv.gadget);
break;
+#endif
+#ifdef CONFIG_USB_MUSB_OTG
case MUSB_OTG:
break;
+#endif
+ default:
+ return -EINVAL;
}
+ return 0;
}
int __init musb_platform_init(struct musb *musb)
diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
index ee8fca92a4a..9e20fd070d7 100644
--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -598,7 +598,7 @@ static void tusb_source_power(struct musb *musb, int is_on)
* and peripheral modes in non-OTG configurations by reconfiguring hardware
* and then setting musb->board_mode. For now, only support OTG mode.
*/
-void musb_platform_set_mode(struct musb *musb, u8 musb_mode)
+int musb_platform_set_mode(struct musb *musb, u8 musb_mode)
{
void __iomem *tbase = musb->ctrl_base;
u32 otg_stat, phy_otg_ctrl, phy_otg_ena, dev_conf;
@@ -641,7 +641,8 @@ void musb_platform_set_mode(struct musb *musb, u8 musb_mode)
#endif
default:
- DBG(2, "Trying to set unknown mode %i\n", musb_mode);
+ DBG(2, "Trying to set mode %i\n", musb_mode);
+ return -EINVAL;
}
musb_writel(tbase, TUSB_PHY_OTG_CTRL,
@@ -655,6 +656,8 @@ void musb_platform_set_mode(struct musb *musb, u8 musb_mode)
!(otg_stat & TUSB_DEV_OTG_STAT_ID_STATUS))
INFO("Cannot be peripheral with mini-A cable "
"otg_stat: %08x\n", otg_stat);
+
+ return 0;
}
static inline unsigned long