summaryrefslogtreecommitdiffstats
path: root/drivers/usb/net/asix.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/net/asix.c')
-rw-r--r--drivers/usb/net/asix.c948
1 files changed, 948 insertions, 0 deletions
diff --git a/drivers/usb/net/asix.c b/drivers/usb/net/asix.c
new file mode 100644
index 00000000000..861f00a4375
--- /dev/null
+++ b/drivers/usb/net/asix.c
@@ -0,0 +1,948 @@
+/*
+ * ASIX AX8817X based USB 2.0 Ethernet Devices
+ * Copyright (C) 2003-2005 David Hollis <dhollis@davehollis.com>
+ * Copyright (C) 2005 Phil Chang <pchang23@sbcglobal.net>
+ * Copyright (c) 2002-2003 TiVo Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+// #define DEBUG // error path messages, extra info
+// #define VERBOSE // more; success messages
+
+#include <linux/config.h>
+#ifdef CONFIG_USB_DEBUG
+# define DEBUG
+#endif
+#include <linux/module.h>
+#include <linux/kmod.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/workqueue.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/crc32.h>
+
+#include "usbnet.h"
+
+
+/* ASIX AX8817X based USB 2.0 Ethernet Devices */
+
+#define AX_CMD_SET_SW_MII 0x06
+#define AX_CMD_READ_MII_REG 0x07
+#define AX_CMD_WRITE_MII_REG 0x08
+#define AX_CMD_SET_HW_MII 0x0a
+#define AX_CMD_READ_EEPROM 0x0b
+#define AX_CMD_WRITE_EEPROM 0x0c
+#define AX_CMD_WRITE_ENABLE 0x0d
+#define AX_CMD_WRITE_DISABLE 0x0e
+#define AX_CMD_WRITE_RX_CTL 0x10
+#define AX_CMD_READ_IPG012 0x11
+#define AX_CMD_WRITE_IPG0 0x12
+#define AX_CMD_WRITE_IPG1 0x13
+#define AX_CMD_WRITE_IPG2 0x14
+#define AX_CMD_WRITE_MULTI_FILTER 0x16
+#define AX_CMD_READ_NODE_ID 0x17
+#define AX_CMD_READ_PHY_ID 0x19
+#define AX_CMD_READ_MEDIUM_STATUS 0x1a
+#define AX_CMD_WRITE_MEDIUM_MODE 0x1b
+#define AX_CMD_READ_MONITOR_MODE 0x1c
+#define AX_CMD_WRITE_MONITOR_MODE 0x1d
+#define AX_CMD_WRITE_GPIOS 0x1f
+#define AX_CMD_SW_RESET 0x20
+#define AX_CMD_SW_PHY_STATUS 0x21
+#define AX_CMD_SW_PHY_SELECT 0x22
+#define AX88772_CMD_READ_NODE_ID 0x13
+
+#define AX_MONITOR_MODE 0x01
+#define AX_MONITOR_LINK 0x02
+#define AX_MONITOR_MAGIC 0x04
+#define AX_MONITOR_HSFS 0x10
+
+/* AX88172 Medium Status Register values */
+#define AX_MEDIUM_FULL_DUPLEX 0x02
+#define AX_MEDIUM_TX_ABORT_ALLOW 0x04
+#define AX_MEDIUM_FLOW_CONTROL_EN 0x10
+
+#define AX_MCAST_FILTER_SIZE 8
+#define AX_MAX_MCAST 64
+
+#define AX_EEPROM_LEN 0x40
+
+#define AX_SWRESET_CLEAR 0x00
+#define AX_SWRESET_RR 0x01
+#define AX_SWRESET_RT 0x02
+#define AX_SWRESET_PRTE 0x04
+#define AX_SWRESET_PRL 0x08
+#define AX_SWRESET_BZ 0x10
+#define AX_SWRESET_IPRL 0x20
+#define AX_SWRESET_IPPD 0x40
+
+#define AX88772_IPG0_DEFAULT 0x15
+#define AX88772_IPG1_DEFAULT 0x0c
+#define AX88772_IPG2_DEFAULT 0x12
+
+#define AX88772_MEDIUM_FULL_DUPLEX 0x0002
+#define AX88772_MEDIUM_RESERVED 0x0004
+#define AX88772_MEDIUM_RX_FC_ENABLE 0x0010
+#define AX88772_MEDIUM_TX_FC_ENABLE 0x0020
+#define AX88772_MEDIUM_PAUSE_FORMAT 0x0080
+#define AX88772_MEDIUM_RX_ENABLE 0x0100
+#define AX88772_MEDIUM_100MB 0x0200
+#define AX88772_MEDIUM_DEFAULT \
+ (AX88772_MEDIUM_FULL_DUPLEX | AX88772_MEDIUM_RX_FC_ENABLE | \
+ AX88772_MEDIUM_TX_FC_ENABLE | AX88772_MEDIUM_100MB | \
+ AX88772_MEDIUM_RESERVED | AX88772_MEDIUM_RX_ENABLE )
+
+#define AX_EEPROM_MAGIC 0xdeadbeef
+
+/* This structure cannot exceed sizeof(unsigned long [5]) AKA 20 bytes */
+struct ax8817x_data {
+ u8 multi_filter[AX_MCAST_FILTER_SIZE];
+};
+
+struct ax88172_int_data {
+ u16 res1;
+ u8 link;
+ u16 res2;
+ u8 status;
+ u16 res3;
+} __attribute__ ((packed));
+
+static int ax8817x_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
+ u16 size, void *data)
+{
+ return usb_control_msg(
+ dev->udev,
+ usb_rcvctrlpipe(dev->udev, 0),
+ cmd,
+ USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ value,
+ index,
+ data,
+ size,
+ USB_CTRL_GET_TIMEOUT);
+}
+
+static int ax8817x_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
+ u16 size, void *data)
+{
+ return usb_control_msg(
+ dev->udev,
+ usb_sndctrlpipe(dev->udev, 0),
+ cmd,
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ value,
+ index,
+ data,
+ size,
+ USB_CTRL_SET_TIMEOUT);
+}
+
+static void ax8817x_async_cmd_callback(struct urb *urb, struct pt_regs *regs)
+{
+ struct usb_ctrlrequest *req = (struct usb_ctrlrequest *)urb->context;
+
+ if (urb->status < 0)
+ printk(KERN_DEBUG "ax8817x_async_cmd_callback() failed with %d",
+ urb->status);
+
+ kfree(req);
+ usb_free_urb(urb);
+}
+
+static void ax8817x_status(struct usbnet *dev, struct urb *urb)
+{
+ struct ax88172_int_data *event;
+ int link;
+
+ if (urb->actual_length < 8)
+ return;
+
+ event = urb->transfer_buffer;
+ link = event->link & 0x01;
+ if (netif_carrier_ok(dev->net) != link) {
+ if (link) {
+ netif_carrier_on(dev->net);
+ usbnet_defer_kevent (dev, EVENT_LINK_RESET );
+ } else
+ netif_carrier_off(dev->net);
+ devdbg(dev, "ax8817x - Link Status is: %d", link);
+ }
+}
+
+static void
+ax8817x_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value, u16 index,
+ u16 size, void *data)
+{
+ struct usb_ctrlrequest *req;
+ int status;
+ struct urb *urb;
+
+ if ((urb = usb_alloc_urb(0, GFP_ATOMIC)) == NULL) {
+ devdbg(dev, "Error allocating URB in write_cmd_async!");
+ return;
+ }
+
+ if ((req = kmalloc(sizeof(struct usb_ctrlrequest), GFP_ATOMIC)) == NULL) {
+ deverr(dev, "Failed to allocate memory for control request");
+ usb_free_urb(urb);
+ return;
+ }
+
+ req->bRequestType = USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE;
+ req->bRequest = cmd;
+ req->wValue = cpu_to_le16(value);
+ req->wIndex = cpu_to_le16(index);
+ req->wLength = cpu_to_le16(size);
+
+ usb_fill_control_urb(urb, dev->udev,
+ usb_sndctrlpipe(dev->udev, 0),
+ (void *)req, data, size,
+ ax8817x_async_cmd_callback, req);
+
+ if((status = usb_submit_urb(urb, GFP_ATOMIC)) < 0) {
+ deverr(dev, "Error submitting the control message: status=%d",
+ status);
+ kfree(req);
+ usb_free_urb(urb);
+ }
+}
+
+static void ax8817x_set_multicast(struct net_device *net)
+{
+ struct usbnet *dev = netdev_priv(net);
+ struct ax8817x_data *data = (struct ax8817x_data *)&dev->data;
+ u8 rx_ctl = 0x8c;
+
+ if (net->flags & IFF_PROMISC) {
+ rx_ctl |= 0x01;
+ } else if (net->flags & IFF_ALLMULTI
+ || net->mc_count > AX_MAX_MCAST) {
+ rx_ctl |= 0x02;
+ } else if (net->mc_count == 0) {
+ /* just broadcast and directed */
+ } else {
+ /* We use the 20 byte dev->data
+ * for our 8 byte filter buffer
+ * to avoid allocating memory that
+ * is tricky to free later */
+ struct dev_mc_list *mc_list = net->mc_list;
+ u32 crc_bits;
+ int i;
+
+ memset(data->multi_filter, 0, AX_MCAST_FILTER_SIZE);
+
+ /* Build the multicast hash filter. */
+ for (i = 0; i < net->mc_count; i++) {
+ crc_bits =
+ ether_crc(ETH_ALEN,
+ mc_list->dmi_addr) >> 26;
+ data->multi_filter[crc_bits >> 3] |=
+ 1 << (crc_bits & 7);
+ mc_list = mc_list->next;
+ }
+
+ ax8817x_write_cmd_async(dev, AX_CMD_WRITE_MULTI_FILTER, 0, 0,
+ AX_MCAST_FILTER_SIZE, data->multi_filter);
+
+ rx_ctl |= 0x10;
+ }
+
+ ax8817x_write_cmd_async(dev, AX_CMD_WRITE_RX_CTL, rx_ctl, 0, 0, NULL);
+}
+
+static int ax8817x_mdio_read(struct net_device *netdev, int phy_id, int loc)
+{
+ struct usbnet *dev = netdev_priv(netdev);
+ u16 res;
+ u8 buf[1];
+
+ ax8817x_write_cmd(dev, AX_CMD_SET_SW_MII, 0, 0, 0, &buf);
+ ax8817x_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id,
+ (__u16)loc, 2, (u16 *)&res);
+ ax8817x_write_cmd(dev, AX_CMD_SET_HW_MII, 0, 0, 0, &buf);
+
+ return res & 0xffff;
+}
+
+/* same as above, but converts resulting value to cpu byte order */
+static int ax8817x_mdio_read_le(struct net_device *netdev, int phy_id, int loc)
+{
+ return le16_to_cpu(ax8817x_mdio_read(netdev,phy_id, loc));
+}
+
+static void
+ax8817x_mdio_write(struct net_device *netdev, int phy_id, int loc, int val)
+{
+ struct usbnet *dev = netdev_priv(netdev);
+ u16 res = val;
+ u8 buf[1];
+
+ ax8817x_write_cmd(dev, AX_CMD_SET_SW_MII, 0, 0, 0, &buf);
+ ax8817x_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id,
+ (__u16)loc, 2, (u16 *)&res);
+ ax8817x_write_cmd(dev, AX_CMD_SET_HW_MII, 0, 0, 0, &buf);
+}
+
+/* same as above, but converts new value to le16 byte order before writing */
+static void
+ax8817x_mdio_write_le(struct net_device *netdev, int phy_id, int loc, int val)
+{
+ ax8817x_mdio_write( netdev, phy_id, loc, cpu_to_le16(val) );
+}
+
+static int ax88172_link_reset(struct usbnet *dev)
+{
+ u16 lpa;
+ u16 adv;
+ u16 res;
+ u8 mode;
+
+ mode = AX_MEDIUM_TX_ABORT_ALLOW | AX_MEDIUM_FLOW_CONTROL_EN;
+ lpa = ax8817x_mdio_read_le(dev->net, dev->mii.phy_id, MII_LPA);
+ adv = ax8817x_mdio_read_le(dev->net, dev->mii.phy_id, MII_ADVERTISE);
+ res = mii_nway_result(lpa|adv);
+ if (res & LPA_DUPLEX)
+ mode |= AX_MEDIUM_FULL_DUPLEX;
+ ax8817x_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE, mode, 0, 0, NULL);
+
+ return 0;
+}
+
+static void
+ax8817x_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
+{
+ struct usbnet *dev = netdev_priv(net);
+ u8 opt;
+
+ if (ax8817x_read_cmd(dev, AX_CMD_READ_MONITOR_MODE, 0, 0, 1, &opt) < 0) {
+ wolinfo->supported = 0;
+ wolinfo->wolopts = 0;
+ return;
+ }
+ wolinfo->supported = WAKE_PHY | WAKE_MAGIC;
+ wolinfo->wolopts = 0;
+ if (opt & AX_MONITOR_MODE) {
+ if (opt & AX_MONITOR_LINK)
+ wolinfo->wolopts |= WAKE_PHY;
+ if (opt & AX_MONITOR_MAGIC)
+ wolinfo->wolopts |= WAKE_MAGIC;
+ }
+}
+
+static int
+ax8817x_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
+{
+ struct usbnet *dev = netdev_priv(net);
+ u8 opt = 0;
+ u8 buf[1];
+
+ if (wolinfo->wolopts & WAKE_PHY)
+ opt |= AX_MONITOR_LINK;
+ if (wolinfo->wolopts & WAKE_MAGIC)
+ opt |= AX_MONITOR_MAGIC;
+ if (opt != 0)
+ opt |= AX_MONITOR_MODE;
+
+ if (ax8817x_write_cmd(dev, AX_CMD_WRITE_MONITOR_MODE,
+ opt, 0, 0, &buf) < 0)
+ return -EINVAL;
+
+ return 0;
+}
+
+static int ax8817x_get_eeprom_len(struct net_device *net)
+{
+ return AX_EEPROM_LEN;
+}
+
+static int ax8817x_get_eeprom(struct net_device *net,
+ struct ethtool_eeprom *eeprom, u8 *data)
+{
+ struct usbnet *dev = netdev_priv(net);
+ u16 *ebuf = (u16 *)data;
+ int i;
+
+ /* Crude hack to ensure that we don't overwrite memory
+ * if an odd length is supplied
+ */
+ if (eeprom->len % 2)
+ return -EINVAL;
+
+ eeprom->magic = AX_EEPROM_MAGIC;
+
+ /* ax8817x returns 2 bytes from eeprom on read */
+ for (i=0; i < eeprom->len / 2; i++) {
+ if (ax8817x_read_cmd(dev, AX_CMD_READ_EEPROM,
+ eeprom->offset + i, 0, 2, &ebuf[i]) < 0)
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static void ax8817x_get_drvinfo (struct net_device *net,
+ struct ethtool_drvinfo *info)
+{
+ /* Inherit standard device info */
+ usbnet_get_drvinfo(net, info);
+ info->eedump_len = 0x3e;
+}
+
+static int ax8817x_get_settings(struct net_device *net, struct ethtool_cmd *cmd)
+{
+ struct usbnet *dev = netdev_priv(net);
+
+ return mii_ethtool_gset(&dev->mii,cmd);
+}
+
+static int ax8817x_set_settings(struct net_device *net, struct ethtool_cmd *cmd)
+{
+ struct usbnet *dev = netdev_priv(net);
+
+ return mii_ethtool_sset(&dev->mii,cmd);
+}
+
+/* We need to override some ethtool_ops so we require our
+ own structure so we don't interfere with other usbnet
+ devices that may be connected at the same time. */
+static struct ethtool_ops ax8817x_ethtool_ops = {
+ .get_drvinfo = ax8817x_get_drvinfo,
+ .get_link = ethtool_op_get_link,
+ .get_msglevel = usbnet_get_msglevel,
+ .set_msglevel = usbnet_set_msglevel,
+ .get_wol = ax8817x_get_wol,
+ .set_wol = ax8817x_set_wol,
+ .get_eeprom_len = ax8817x_get_eeprom_len,
+ .get_eeprom = ax8817x_get_eeprom,
+ .get_settings = ax8817x_get_settings,
+ .set_settings = ax8817x_set_settings,
+};
+
+static int ax8817x_ioctl (struct net_device *net, struct ifreq *rq, int cmd)
+{
+ struct usbnet *dev = netdev_priv(net);
+
+ return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
+}
+
+static int ax8817x_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+ int ret = 0;
+ void *buf;
+ int i;
+ unsigned long gpio_bits = dev->driver_info->data;
+
+ usbnet_get_endpoints(dev,intf);
+
+ buf = kmalloc(ETH_ALEN, GFP_KERNEL);
+ if(!buf) {
+ ret = -ENOMEM;
+ goto out1;
+ }
+
+ /* Toggle the GPIOs in a manufacturer/model specific way */
+ for (i = 2; i >= 0; i--) {
+ if ((ret = ax8817x_write_cmd(dev, AX_CMD_WRITE_GPIOS,
+ (gpio_bits >> (i * 8)) & 0xff, 0, 0,
+ buf)) < 0)
+ goto out2;
+ msleep(5);
+ }
+
+ if ((ret = ax8817x_write_cmd(dev, AX_CMD_WRITE_RX_CTL,
+ 0x80, 0, 0, buf)) < 0) {
+ dbg("send AX_CMD_WRITE_RX_CTL failed: %d", ret);
+ goto out2;
+ }
+
+ /* Get the MAC address */
+ memset(buf, 0, ETH_ALEN);
+ if ((ret = ax8817x_read_cmd(dev, AX_CMD_READ_NODE_ID,
+ 0, 0, 6, buf)) < 0) {
+ dbg("read AX_CMD_READ_NODE_ID failed: %d", ret);
+ goto out2;
+ }
+ memcpy(dev->net->dev_addr, buf, ETH_ALEN);
+
+ /* Get the PHY id */
+ if ((ret = ax8817x_read_cmd(dev, AX_CMD_READ_PHY_ID,
+ 0, 0, 2, buf)) < 0) {
+ dbg("error on read AX_CMD_READ_PHY_ID: %02x", ret);
+ goto out2;
+ } else if (ret < 2) {
+ /* this should always return 2 bytes */
+ dbg("AX_CMD_READ_PHY_ID returned less than 2 bytes: ret=%02x",
+ ret);
+ ret = -EIO;
+ goto out2;
+ }
+
+ /* Initialize MII structure */
+ dev->mii.dev = dev->net;
+ dev->mii.mdio_read = ax8817x_mdio_read;
+ dev->mii.mdio_write = ax8817x_mdio_write;
+ dev->mii.phy_id_mask = 0x3f;
+ dev->mii.reg_num_mask = 0x1f;
+ dev->mii.phy_id = *((u8 *)buf + 1);
+ dev->net->do_ioctl = ax8817x_ioctl;
+
+ dev->net->set_multicast_list = ax8817x_set_multicast;
+ dev->net->ethtool_ops = &ax8817x_ethtool_ops;
+
+ ax8817x_mdio_write_le(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
+ ax8817x_mdio_write_le(dev->net, dev->mii.phy_id, MII_ADVERTISE,
+ ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP);
+ mii_nway_restart(&dev->mii);
+
+ return 0;
+out2:
+ kfree(buf);
+out1:
+ return ret;
+}
+
+static struct ethtool_ops ax88772_ethtool_ops = {
+ .get_drvinfo = ax8817x_get_drvinfo,
+ .get_link = ethtool_op_get_link,
+ .get_msglevel = usbnet_get_msglevel,
+ .set_msglevel = usbnet_set_msglevel,
+ .get_wol = ax8817x_get_wol,
+ .set_wol = ax8817x_set_wol,
+ .get_eeprom_len = ax8817x_get_eeprom_len,
+ .get_eeprom = ax8817x_get_eeprom,
+ .get_settings = ax8817x_get_settings,
+ .set_settings = ax8817x_set_settings,
+};
+
+static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+ int ret;
+ void *buf;
+
+ usbnet_get_endpoints(dev,intf);
+
+ buf = kmalloc(6, GFP_KERNEL);
+ if(!buf) {
+ dbg ("Cannot allocate memory for buffer");
+ ret = -ENOMEM;
+ goto out1;
+ }
+
+ if ((ret = ax8817x_write_cmd(dev, AX_CMD_WRITE_GPIOS,
+ 0x00B0, 0, 0, buf)) < 0)
+ goto out2;
+
+ msleep(5);
+ if ((ret = ax8817x_write_cmd(dev, AX_CMD_SW_PHY_SELECT,
+ 0x0001, 0, 0, buf)) < 0) {
+ dbg("Select PHY #1 failed: %d", ret);
+ goto out2;
+ }
+
+ if ((ret = ax8817x_write_cmd(dev, AX_CMD_SW_RESET, AX_SWRESET_IPPD,
+ 0, 0, buf)) < 0) {
+ dbg("Failed to power down internal PHY: %d", ret);
+ goto out2;
+ }
+
+ msleep(150);
+ if ((ret = ax8817x_write_cmd(dev, AX_CMD_SW_RESET, AX_SWRESET_CLEAR,
+ 0, 0, buf)) < 0) {
+ dbg("Failed to perform software reset: %d", ret);
+ goto out2;
+ }
+
+ msleep(150);
+ if ((ret = ax8817x_write_cmd(dev, AX_CMD_SW_RESET,
+ AX_SWRESET_IPRL | AX_SWRESET_PRL,
+ 0, 0, buf)) < 0) {
+ dbg("Failed to set Internal/External PHY reset control: %d",
+ ret);
+ goto out2;
+ }
+
+ msleep(150);
+ if ((ret = ax8817x_write_cmd(dev, AX_CMD_WRITE_RX_CTL,
+ 0x0000, 0, 0, buf)) < 0) {
+ dbg("Failed to reset RX_CTL: %d", ret);
+ goto out2;
+ }
+
+ /* Get the MAC address */
+ memset(buf, 0, ETH_ALEN);
+ if ((ret = ax8817x_read_cmd(dev, AX88772_CMD_READ_NODE_ID,
+ 0, 0, ETH_ALEN, buf)) < 0) {
+ dbg("Failed to read MAC address: %d", ret);
+ goto out2;
+ }
+ memcpy(dev->net->dev_addr, buf, ETH_ALEN);
+
+ if ((ret = ax8817x_write_cmd(dev, AX_CMD_SET_SW_MII,
+ 0, 0, 0, buf)) < 0) {
+ dbg("Enabling software MII failed: %d", ret);
+ goto out2;
+ }
+
+ if (((ret = ax8817x_read_cmd(dev, AX_CMD_READ_MII_REG,
+ 0x0010, 2, 2, buf)) < 0)
+ || (*((u16 *)buf) != 0x003b)) {
+ dbg("Read PHY register 2 must be 0x3b00: %d", ret);
+ goto out2;
+ }
+
+ /* Initialize MII structure */
+ dev->mii.dev = dev->net;
+ dev->mii.mdio_read = ax8817x_mdio_read;
+ dev->mii.mdio_write = ax8817x_mdio_write;
+ dev->mii.phy_id_mask = 0xff;
+ dev->mii.reg_num_mask = 0xff;
+ dev->net->do_ioctl = ax8817x_ioctl;
+
+ /* Get the PHY id */
+ if ((ret = ax8817x_read_cmd(dev, AX_CMD_READ_PHY_ID,
+ 0, 0, 2, buf)) < 0) {
+ dbg("Error reading PHY ID: %02x", ret);
+ goto out2;
+ } else if (ret < 2) {
+ /* this should always return 2 bytes */
+ dbg("AX_CMD_READ_PHY_ID returned less than 2 bytes: ret=%02x",
+ ret);
+ ret = -EIO;
+ goto out2;
+ }
+ dev->mii.phy_id = *((u8 *)buf + 1);
+
+ if ((ret = ax8817x_write_cmd(dev, AX_CMD_SW_RESET, AX_SWRESET_PRL,
+ 0, 0, buf)) < 0) {
+ dbg("Set external PHY reset pin level: %d", ret);
+ goto out2;
+ }
+ msleep(150);
+ if ((ret = ax8817x_write_cmd(dev, AX_CMD_SW_RESET,
+ AX_SWRESET_IPRL | AX_SWRESET_PRL,
+ 0, 0, buf)) < 0) {
+ dbg("Set Internal/External PHY reset control: %d", ret);
+ goto out2;
+ }
+ msleep(150);
+
+
+ dev->net->set_multicast_list = ax8817x_set_multicast;
+ dev->net->ethtool_ops = &ax88772_ethtool_ops;
+
+ ax8817x_mdio_write_le(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
+ ax8817x_mdio_write_le(dev->net, dev->mii.phy_id, MII_ADVERTISE,
+ ADVERTISE_ALL | ADVERTISE_CSMA);
+ mii_nway_restart(&dev->mii);
+
+ if ((ret = ax8817x_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE,
+ AX88772_MEDIUM_DEFAULT, 0, 0, buf)) < 0) {
+ dbg("Write medium mode register: %d", ret);
+ goto out2;
+ }
+
+ if ((ret = ax8817x_write_cmd(dev, AX_CMD_WRITE_IPG0,
+ AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT,
+ AX88772_IPG2_DEFAULT, 0, buf)) < 0) {
+ dbg("Write IPG,IPG1,IPG2 failed: %d", ret);
+ goto out2;
+ }
+ if ((ret =
+ ax8817x_write_cmd(dev, AX_CMD_SET_HW_MII, 0, 0, 0, &buf)) < 0) {
+ dbg("Failed to set hardware MII: %02x", ret);
+ goto out2;
+ }
+
+ /* Set RX_CTL to default values with 2k buffer, and enable cactus */
+ if ((ret =
+ ax8817x_write_cmd(dev, AX_CMD_WRITE_RX_CTL, 0x0088, 0, 0,
+ buf)) < 0) {
+ dbg("Reset RX_CTL failed: %d", ret);
+ goto out2;
+ }
+
+ kfree(buf);
+
+ /* Asix framing packs multiple eth frames into a 2K usb bulk transfer */
+ if (dev->driver_info->flags & FLAG_FRAMING_AX) {
+ /* hard_mtu is still the default - the device does not support
+ jumbo eth frames */
+ dev->rx_urb_size = 2048;
+ }
+
+ return 0;
+
+out2:
+ kfree(buf);
+out1:
+ return ret;
+}
+
+static int ax88772_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+ u8 *head;
+ u32 header;
+ char *packet;
+ struct sk_buff *ax_skb;
+ u16 size;
+
+ head = (u8 *) skb->data;
+ memcpy(&header, head, sizeof(header));
+ le32_to_cpus(&header);
+ packet = head + sizeof(header);
+
+ skb_pull(skb, 4);
+
+ while (skb->len > 0) {
+ if ((short)(header & 0x0000ffff) !=
+ ~((short)((header & 0xffff0000) >> 16))) {
+ devdbg(dev,"header length data is error");
+ }
+ /* get the packet length */
+ size = (u16) (header & 0x0000ffff);
+
+ if ((skb->len) - ((size + 1) & 0xfffe) == 0)
+ return 2;
+ if (size > ETH_FRAME_LEN) {
+ devdbg(dev,"invalid rx length %d", size);
+ return 0;
+ }
+ ax_skb = skb_clone(skb, GFP_ATOMIC);
+ if (ax_skb) {
+ ax_skb->len = size;
+ ax_skb->data = packet;
+ ax_skb->tail = packet + size;
+ usbnet_skb_return(dev, ax_skb);
+ } else {
+ return 0;
+ }
+
+ skb_pull(skb, (size + 1) & 0xfffe);
+
+ if (skb->len == 0)
+ break;
+
+ head = (u8 *) skb->data;
+ memcpy(&header, head, sizeof(header));
+ le32_to_cpus(&header);
+ packet = head + sizeof(header);
+ skb_pull(skb, 4);
+ }
+
+ if (skb->len < 0) {
+ devdbg(dev,"invalid rx length %d", skb->len);
+ return 0;
+ }
+ return 1;
+}
+
+static struct sk_buff *ax88772_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
+ unsigned flags)
+{
+ int padlen;
+ int headroom = skb_headroom(skb);
+ int tailroom = skb_tailroom(skb);
+ u32 packet_len;
+ u32 padbytes = 0xffff0000;
+
+ padlen = ((skb->len + 4) % 512) ? 0 : 4;
+
+ if ((!skb_cloned(skb))
+ && ((headroom + tailroom) >= (4 + padlen))) {
+ if ((headroom < 4) || (tailroom < padlen)) {
+ skb->data = memmove(skb->head + 4, skb->data, skb->len);
+ skb->tail = skb->data + skb->len;
+ }
+ } else {
+ struct sk_buff *skb2;
+ skb2 = skb_copy_expand(skb, 4, padlen, flags);
+ dev_kfree_skb_any(skb);
+ skb = skb2;
+ if (!skb)
+ return NULL;
+ }
+
+ skb_push(skb, 4);
+ packet_len = (((skb->len - 4) ^ 0x0000ffff) << 16) + (skb->len - 4);
+ memcpy(skb->data, &packet_len, sizeof(packet_len));
+
+ if ((skb->len % 512) == 0) {
+ memcpy( skb->tail, &padbytes, sizeof(padbytes));
+ skb_put(skb, sizeof(padbytes));
+ }
+ return skb;
+}
+
+static int ax88772_link_reset(struct usbnet *dev)
+{
+ u16 lpa;
+ u16 adv;
+ u16 res;
+ u16 mode;
+
+ mode = AX88772_MEDIUM_DEFAULT;
+ lpa = ax8817x_mdio_read_le(dev->net, dev->mii.phy_id, MII_LPA);
+ adv = ax8817x_mdio_read_le(dev->net, dev->mii.phy_id, MII_ADVERTISE);
+ res = mii_nway_result(lpa|adv);
+
+ if ((res & LPA_DUPLEX) == 0)
+ mode &= ~AX88772_MEDIUM_FULL_DUPLEX;
+ if ((res & LPA_100) == 0)
+ mode &= ~AX88772_MEDIUM_100MB;
+ ax8817x_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE, mode, 0, 0, NULL);
+
+ return 0;
+}
+
+static const struct driver_info ax8817x_info = {
+ .description = "ASIX AX8817x USB 2.0 Ethernet",
+ .bind = ax8817x_bind,
+ .status = ax8817x_status,
+ .link_reset = ax88172_link_reset,
+ .reset = ax88172_link_reset,
+ .flags = FLAG_ETHER,
+ .data = 0x00130103,
+};
+
+static const struct driver_info dlink_dub_e100_info = {
+ .description = "DLink DUB-E100 USB Ethernet",
+ .bind = ax8817x_bind,
+ .status = ax8817x_status,
+ .link_reset = ax88172_link_reset,
+ .reset = ax88172_link_reset,
+ .flags = FLAG_ETHER,
+ .data = 0x009f9d9f,
+};
+
+static const struct driver_info netgear_fa120_info = {
+ .description = "Netgear FA-120 USB Ethernet",
+ .bind = ax8817x_bind,
+ .status = ax8817x_status,
+ .link_reset = ax88172_link_reset,
+ .reset = ax88172_link_reset,
+ .flags = FLAG_ETHER,
+ .data = 0x00130103,
+};
+
+static const struct driver_info hawking_uf200_info = {
+ .description = "Hawking UF200 USB Ethernet",
+ .bind = ax8817x_bind,
+ .status = ax8817x_status,
+ .link_reset = ax88172_link_reset,
+ .reset = ax88172_link_reset,
+ .flags = FLAG_ETHER,
+ .data = 0x001f1d1f,
+};
+
+static const struct driver_info ax88772_info = {
+ .description = "ASIX AX88772 USB 2.0 Ethernet",
+ .bind = ax88772_bind,
+ .status = ax8817x_status,
+ .link_reset = ax88772_link_reset,
+ .reset = ax88772_link_reset,
+ .flags = FLAG_ETHER | FLAG_FRAMING_AX,
+ .rx_fixup = ax88772_rx_fixup,
+ .tx_fixup = ax88772_tx_fixup,
+ .data = 0x00130103,
+};
+
+static const struct usb_device_id products [] = {
+{
+ // Linksys USB200M
+ USB_DEVICE (0x077b, 0x2226),
+ .driver_info = (unsigned long) &ax8817x_info,
+}, {
+ // Netgear FA120
+ USB_DEVICE (0x0846, 0x1040),
+ .driver_info = (unsigned long) &netgear_fa120_info,
+}, {
+ // DLink DUB-E100
+ USB_DEVICE (0x2001, 0x1a00),
+ .driver_info = (unsigned long) &dlink_dub_e100_info,
+}, {
+ // Intellinet, ST Lab USB Ethernet
+ USB_DEVICE (0x0b95, 0x1720),
+ .driver_info = (unsigned long) &ax8817x_info,
+}, {
+ // Hawking UF200, TrendNet TU2-ET100
+ USB_DEVICE (0x07b8, 0x420a),
+ .driver_info = (unsigned long) &hawking_uf200_info,
+}, {
+ // Billionton Systems, USB2AR
+ USB_DEVICE (0x08dd, 0x90ff),
+ .driver_info = (unsigned long) &ax8817x_info,
+}, {
+ // ATEN UC210T
+ USB_DEVICE (0x0557, 0x2009),
+ .driver_info = (unsigned long) &ax8817x_info,
+}, {
+ // Buffalo LUA-U2-KTX
+ USB_DEVICE (0x0411, 0x003d),
+ .driver_info = (unsigned long) &ax8817x_info,
+}, {
+ // Sitecom LN-029 "USB 2.0 10/100 Ethernet adapter"
+ USB_DEVICE (0x6189, 0x182d),
+ .driver_info = (unsigned long) &ax8817x_info,
+}, {
+ // corega FEther USB2-TX
+ USB_DEVICE (0x07aa, 0x0017),
+ .driver_info = (unsigned long) &ax8817x_info,
+}, {
+ // Surecom EP-1427X-2
+ USB_DEVICE (0x1189, 0x0893),
+ .driver_info = (unsigned long) &ax8817x_info,
+}, {
+ // goodway corp usb gwusb2e
+ USB_DEVICE (0x1631, 0x6200),
+ .driver_info = (unsigned long) &ax8817x_info,
+}, {
+ // ASIX AX88772 10/100
+ USB_DEVICE (0x0b95, 0x7720),
+ .driver_info = (unsigned long) &ax88772_info,
+},
+ { }, // END
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver asix_driver = {
+ .owner = THIS_MODULE,
+ .name = "asix",
+ .id_table = products,
+ .probe = usbnet_probe,
+ .suspend = usbnet_suspend,
+ .resume = usbnet_resume,
+ .disconnect = usbnet_disconnect,
+};
+
+static int __init asix_init(void)
+{
+ return usb_register(&asix_driver);
+}
+module_init(asix_init);
+
+static void __exit asix_exit(void)
+{
+ usb_deregister(&asix_driver);
+}
+module_exit(asix_exit);
+
+MODULE_AUTHOR("David Hollis");
+MODULE_DESCRIPTION("ASIX AX8817X based USB 2.0 Ethernet Devices");
+MODULE_LICENSE("GPL");
+
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-01 20:20:39 +0000