diff options
Diffstat (limited to 'drivers/usb/otg/ulpi.c')
-rw-r--r-- | drivers/usb/otg/ulpi.c | 136 |
1 files changed, 136 insertions, 0 deletions
diff --git a/drivers/usb/otg/ulpi.c b/drivers/usb/otg/ulpi.c new file mode 100644 index 00000000000..896527456b7 --- /dev/null +++ b/drivers/usb/otg/ulpi.c @@ -0,0 +1,136 @@ +/* + * Generic ULPI USB transceiver support + * + * Copyright (C) 2009 Daniel Mack <daniel@caiaq.de> + * + * Based on sources from + * + * Sascha Hauer <s.hauer@pengutronix.de> + * Freescale Semiconductors + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/kernel.h> +#include <linux/usb.h> +#include <linux/usb/otg.h> +#include <linux/usb/ulpi.h> + +/* ULPI register addresses */ +#define ULPI_VID_LOW 0x00 /* Vendor ID low */ +#define ULPI_VID_HIGH 0x01 /* Vendor ID high */ +#define ULPI_PID_LOW 0x02 /* Product ID low */ +#define ULPI_PID_HIGH 0x03 /* Product ID high */ +#define ULPI_ITFCTL 0x07 /* Interface Control */ +#define ULPI_OTGCTL 0x0A /* OTG Control */ + +/* add to above register address to access Set/Clear functions */ +#define ULPI_REG_SET 0x01 +#define ULPI_REG_CLEAR 0x02 + +/* ULPI OTG Control Register bits */ +#define ID_PULL_UP (1 << 0) /* enable ID Pull Up */ +#define DP_PULL_DOWN (1 << 1) /* enable DP Pull Down */ +#define DM_PULL_DOWN (1 << 2) /* enable DM Pull Down */ +#define DISCHRG_VBUS (1 << 3) /* Discharge Vbus */ +#define CHRG_VBUS (1 << 4) /* Charge Vbus */ +#define DRV_VBUS (1 << 5) /* Drive Vbus */ +#define DRV_VBUS_EXT (1 << 6) /* Drive Vbus external */ +#define USE_EXT_VBUS_IND (1 << 7) /* Use ext. Vbus indicator */ + +#define ULPI_ID(vendor, product) (((vendor) << 16) | (product)) + +#define TR_FLAG(flags, a, b) (((flags) & a) ? b : 0) + +/* ULPI hardcoded IDs, used for probing */ +static unsigned int ulpi_ids[] = { + ULPI_ID(0x04cc, 0x1504), /* NXP ISP1504 */ +}; + +static int ulpi_set_flags(struct otg_transceiver *otg) +{ + unsigned int flags = 0; + + if (otg->flags & USB_OTG_PULLUP_ID) + flags |= ID_PULL_UP; + + if (otg->flags & USB_OTG_PULLDOWN_DM) + flags |= DM_PULL_DOWN; + + if (otg->flags & USB_OTG_PULLDOWN_DP) + flags |= DP_PULL_DOWN; + + if (otg->flags & USB_OTG_EXT_VBUS_INDICATOR) + flags |= USE_EXT_VBUS_IND; + + return otg_io_write(otg, flags, ULPI_OTGCTL + ULPI_REG_SET); +} + +static int ulpi_init(struct otg_transceiver *otg) +{ + int i, vid, pid; + + vid = (otg_io_read(otg, ULPI_VID_HIGH) << 8) | + otg_io_read(otg, ULPI_VID_LOW); + pid = (otg_io_read(otg, ULPI_PID_HIGH) << 8) | + otg_io_read(otg, ULPI_PID_LOW); + + pr_info("ULPI transceiver vendor/product ID 0x%04x/0x%04x\n", vid, pid); + + for (i = 0; i < ARRAY_SIZE(ulpi_ids); i++) + if (ulpi_ids[i] == ULPI_ID(vid, pid)) + return ulpi_set_flags(otg); + + pr_err("ULPI ID does not match any known transceiver.\n"); + return -ENODEV; +} + +static int ulpi_set_vbus(struct otg_transceiver *otg, bool on) +{ + unsigned int flags = otg_io_read(otg, ULPI_OTGCTL); + + flags &= ~(DRV_VBUS | DRV_VBUS_EXT); + + if (on) { + if (otg->flags & USB_OTG_DRV_VBUS) + flags |= DRV_VBUS; + + if (otg->flags & USB_OTG_DRV_VBUS_EXT) + flags |= DRV_VBUS_EXT; + } + + return otg_io_write(otg, flags, ULPI_OTGCTL + ULPI_REG_SET); +} + +struct otg_transceiver * +otg_ulpi_create(struct otg_io_access_ops *ops, + unsigned int flags) +{ + struct otg_transceiver *otg; + + otg = kzalloc(sizeof(*otg), GFP_KERNEL); + if (!otg) + return NULL; + + otg->label = "ULPI"; + otg->flags = flags; + otg->io_ops = ops; + otg->init = ulpi_init; + otg->set_vbus = ulpi_set_vbus; + + return otg; +} +EXPORT_SYMBOL_GPL(otg_ulpi_create); + |