summaryrefslogtreecommitdiffstats
path: root/drivers/usb/phy/phy-omap-control.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/phy/phy-omap-control.c')
-rw-r--r--drivers/usb/phy/phy-omap-control.c208
1 files changed, 109 insertions, 99 deletions
diff --git a/drivers/usb/phy/phy-omap-control.c b/drivers/usb/phy/phy-omap-control.c
index a4dda8e1256..09c5ace1edd 100644
--- a/drivers/usb/phy/phy-omap-control.c
+++ b/drivers/usb/phy/phy-omap-control.c
@@ -20,87 +20,77 @@
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/of.h>
+#include <linux/of_device.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/clk.h>
#include <linux/usb/omap_control_usb.h>
-static struct omap_control_usb *control_usb;
-
-/**
- * omap_get_control_dev - returns the device pointer for this control device
- *
- * This API should be called to get the device pointer for this control
- * module device. This device pointer should be used for called other
- * exported API's in this driver.
- *
- * To be used by PHY driver and glue driver.
- */
-struct device *omap_get_control_dev(void)
-{
- if (!control_usb)
- return ERR_PTR(-ENODEV);
-
- return control_usb->dev;
-}
-EXPORT_SYMBOL_GPL(omap_get_control_dev);
-
/**
- * omap_control_usb3_phy_power - power on/off the serializer using control
- * module
+ * omap_control_usb_phy_power - power on/off the phy using control module reg
* @dev: the control module device
- * @on: 0 to off and 1 to on based on powering on or off the PHY
- *
- * usb3 PHY driver should call this API to power on or off the PHY.
+ * @on: 0 or 1, based on powering on or off the PHY
*/
-void omap_control_usb3_phy_power(struct device *dev, bool on)
+void omap_control_usb_phy_power(struct device *dev, int on)
{
u32 val;
unsigned long rate;
- struct omap_control_usb *control_usb = dev_get_drvdata(dev);
+ struct omap_control_usb *control_usb;
- if (control_usb->type != OMAP_CTRL_DEV_TYPE2)
+ if (IS_ERR(dev) || !dev) {
+ pr_err("%s: invalid device\n", __func__);
return;
+ }
- rate = clk_get_rate(control_usb->sys_clk);
- rate = rate/1000000;
-
- val = readl(control_usb->phy_power);
-
- if (on) {
- val &= ~(OMAP_CTRL_USB_PWRCTL_CLK_CMD_MASK |
- OMAP_CTRL_USB_PWRCTL_CLK_FREQ_MASK);
- val |= OMAP_CTRL_USB3_PHY_TX_RX_POWERON <<
- OMAP_CTRL_USB_PWRCTL_CLK_CMD_SHIFT;
- val |= rate << OMAP_CTRL_USB_PWRCTL_CLK_FREQ_SHIFT;
- } else {
- val &= ~OMAP_CTRL_USB_PWRCTL_CLK_CMD_MASK;
- val |= OMAP_CTRL_USB3_PHY_TX_RX_POWEROFF <<
- OMAP_CTRL_USB_PWRCTL_CLK_CMD_SHIFT;
+ control_usb = dev_get_drvdata(dev);
+ if (!control_usb) {
+ dev_err(dev, "%s: invalid control usb device\n", __func__);
+ return;
}
- writel(val, control_usb->phy_power);
-}
-EXPORT_SYMBOL_GPL(omap_control_usb3_phy_power);
+ if (control_usb->type == OMAP_CTRL_TYPE_OTGHS)
+ return;
-/**
- * omap_control_usb_phy_power - power on/off the phy using control module reg
- * @dev: the control module device
- * @on: 0 or 1, based on powering on or off the PHY
- */
-void omap_control_usb_phy_power(struct device *dev, int on)
-{
- u32 val;
- struct omap_control_usb *control_usb = dev_get_drvdata(dev);
+ val = readl(control_usb->power);
- val = readl(control_usb->dev_conf);
+ switch (control_usb->type) {
+ case OMAP_CTRL_TYPE_USB2:
+ if (on)
+ val &= ~OMAP_CTRL_DEV_PHY_PD;
+ else
+ val |= OMAP_CTRL_DEV_PHY_PD;
+ break;
- if (on)
- val &= ~OMAP_CTRL_DEV_PHY_PD;
- else
- val |= OMAP_CTRL_DEV_PHY_PD;
+ case OMAP_CTRL_TYPE_PIPE3:
+ rate = clk_get_rate(control_usb->sys_clk);
+ rate = rate/1000000;
+
+ if (on) {
+ val &= ~(OMAP_CTRL_USB_PWRCTL_CLK_CMD_MASK |
+ OMAP_CTRL_USB_PWRCTL_CLK_FREQ_MASK);
+ val |= OMAP_CTRL_USB3_PHY_TX_RX_POWERON <<
+ OMAP_CTRL_USB_PWRCTL_CLK_CMD_SHIFT;
+ val |= rate << OMAP_CTRL_USB_PWRCTL_CLK_FREQ_SHIFT;
+ } else {
+ val &= ~OMAP_CTRL_USB_PWRCTL_CLK_CMD_MASK;
+ val |= OMAP_CTRL_USB3_PHY_TX_RX_POWEROFF <<
+ OMAP_CTRL_USB_PWRCTL_CLK_CMD_SHIFT;
+ }
+ break;
- writel(val, control_usb->dev_conf);
+ case OMAP_CTRL_TYPE_DRA7USB2:
+ if (on)
+ val &= ~OMAP_CTRL_USB2_PHY_PD;
+ else
+ val |= OMAP_CTRL_USB2_PHY_PD;
+ break;
+ default:
+ dev_err(dev, "%s: type %d not recognized\n",
+ __func__, control_usb->type);
+ break;
+ }
+
+ writel(val, control_usb->power);
}
EXPORT_SYMBOL_GPL(omap_control_usb_phy_power);
@@ -172,11 +162,19 @@ void omap_control_usb_set_mode(struct device *dev,
{
struct omap_control_usb *ctrl_usb;
- if (IS_ERR(dev) || control_usb->type != OMAP_CTRL_DEV_TYPE1)
+ if (IS_ERR(dev) || !dev)
return;
ctrl_usb = dev_get_drvdata(dev);
+ if (!ctrl_usb) {
+ dev_err(dev, "Invalid control usb device\n");
+ return;
+ }
+
+ if (ctrl_usb->type != OMAP_CTRL_TYPE_OTGHS)
+ return;
+
switch (mode) {
case USB_MODE_HOST:
omap_control_usb_host_mode(ctrl_usb);
@@ -193,12 +191,46 @@ void omap_control_usb_set_mode(struct device *dev,
}
EXPORT_SYMBOL_GPL(omap_control_usb_set_mode);
+#ifdef CONFIG_OF
+
+static const enum omap_control_usb_type otghs_data = OMAP_CTRL_TYPE_OTGHS;
+static const enum omap_control_usb_type usb2_data = OMAP_CTRL_TYPE_USB2;
+static const enum omap_control_usb_type pipe3_data = OMAP_CTRL_TYPE_PIPE3;
+static const enum omap_control_usb_type dra7usb2_data = OMAP_CTRL_TYPE_DRA7USB2;
+
+static const struct of_device_id omap_control_usb_id_table[] = {
+ {
+ .compatible = "ti,control-phy-otghs",
+ .data = &otghs_data,
+ },
+ {
+ .compatible = "ti,control-phy-usb2",
+ .data = &usb2_data,
+ },
+ {
+ .compatible = "ti,control-phy-pipe3",
+ .data = &pipe3_data,
+ },
+ {
+ .compatible = "ti,control-phy-dra7usb2",
+ .data = &dra7usb2_data,
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, omap_control_usb_id_table);
+#endif
+
+
static int omap_control_usb_probe(struct platform_device *pdev)
{
struct resource *res;
- struct device_node *np = pdev->dev.of_node;
- struct omap_control_usb_platform_data *pdata =
- dev_get_platdata(&pdev->dev);
+ const struct of_device_id *of_id;
+ struct omap_control_usb *control_usb;
+
+ of_id = of_match_device(of_match_ptr(omap_control_usb_id_table),
+ &pdev->dev);
+ if (!of_id)
+ return -EINVAL;
control_usb = devm_kzalloc(&pdev->dev, sizeof(*control_usb),
GFP_KERNEL);
@@ -207,40 +239,27 @@ static int omap_control_usb_probe(struct platform_device *pdev)
return -ENOMEM;
}
- if (np) {
- of_property_read_u32(np, "ti,type", &control_usb->type);
- } else if (pdata) {
- control_usb->type = pdata->type;
- } else {
- dev_err(&pdev->dev, "no pdata present\n");
- return -EINVAL;
- }
-
- control_usb->dev = &pdev->dev;
-
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
- "control_dev_conf");
- control_usb->dev_conf = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(control_usb->dev_conf))
- return PTR_ERR(control_usb->dev_conf);
+ control_usb->dev = &pdev->dev;
+ control_usb->type = *(enum omap_control_usb_type *)of_id->data;
- if (control_usb->type == OMAP_CTRL_DEV_TYPE1) {
+ if (control_usb->type == OMAP_CTRL_TYPE_OTGHS) {
res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
"otghs_control");
control_usb->otghs_control = devm_ioremap_resource(
&pdev->dev, res);
if (IS_ERR(control_usb->otghs_control))
return PTR_ERR(control_usb->otghs_control);
- }
-
- if (control_usb->type == OMAP_CTRL_DEV_TYPE2) {
+ } else {
res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
- "phy_power_usb");
- control_usb->phy_power = devm_ioremap_resource(
- &pdev->dev, res);
- if (IS_ERR(control_usb->phy_power))
- return PTR_ERR(control_usb->phy_power);
+ "power");
+ control_usb->power = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(control_usb->power)) {
+ dev_err(&pdev->dev, "Couldn't get power register\n");
+ return PTR_ERR(control_usb->power);
+ }
+ }
+ if (control_usb->type == OMAP_CTRL_TYPE_PIPE3) {
control_usb->sys_clk = devm_clk_get(control_usb->dev,
"sys_clkin");
if (IS_ERR(control_usb->sys_clk)) {
@@ -249,20 +268,11 @@ static int omap_control_usb_probe(struct platform_device *pdev)
}
}
-
dev_set_drvdata(control_usb->dev, control_usb);
return 0;
}
-#ifdef CONFIG_OF
-static const struct of_device_id omap_control_usb_id_table[] = {
- { .compatible = "ti,omap-control-usb" },
- {}
-};
-MODULE_DEVICE_TABLE(of, omap_control_usb_id_table);
-#endif
-
static struct platform_driver omap_control_usb_driver = {
.probe = omap_control_usb_probe,
.driver = {