diff options
Diffstat (limited to 'drivers/usb/phy/phy-samsung-usb.c')
| -rw-r--r-- | drivers/usb/phy/phy-samsung-usb.c | 236 |
1 files changed, 236 insertions, 0 deletions
diff --git a/drivers/usb/phy/phy-samsung-usb.c b/drivers/usb/phy/phy-samsung-usb.c new file mode 100644 index 00000000000..7b118ee5f5e --- /dev/null +++ b/drivers/usb/phy/phy-samsung-usb.c @@ -0,0 +1,236 @@ +/* linux/drivers/usb/phy/phy-samsung-usb.c + * + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Author: Praveen Paneri <p.paneri@samsung.com> + * + * Samsung USB-PHY helper driver with common function calls; + * interacts with Samsung USB 2.0 PHY controller driver and later + * with Samsung USB 3.0 PHY driver. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/clk.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/usb/samsung_usb_phy.h> + +#include "phy-samsung-usb.h" + +int samsung_usbphy_parse_dt(struct samsung_usbphy *sphy) +{ + struct device_node *usbphy_sys; + + /* Getting node for system controller interface for usb-phy */ + usbphy_sys = of_get_child_by_name(sphy->dev->of_node, "usbphy-sys"); + if (!usbphy_sys) { + dev_err(sphy->dev, "No sys-controller interface for usb-phy\n"); + return -ENODEV; + } + + sphy->pmuregs = of_iomap(usbphy_sys, 0); + + if (sphy->pmuregs == NULL) { + dev_err(sphy->dev, "Can't get usb-phy pmu control register\n"); + goto err0; + } + + sphy->sysreg = of_iomap(usbphy_sys, 1); + + /* + * Not returning error code here, since this situation is not fatal. + * Few SoCs may not have this switch available + */ + if (sphy->sysreg == NULL) + dev_warn(sphy->dev, "Can't get usb-phy sysreg cfg register\n"); + + of_node_put(usbphy_sys); + + return 0; + +err0: + of_node_put(usbphy_sys); + return -ENXIO; +} +EXPORT_SYMBOL_GPL(samsung_usbphy_parse_dt); + +/* + * Set isolation here for phy. + * Here 'on = true' would mean USB PHY block is isolated, hence + * de-activated and vice-versa. + */ +void samsung_usbphy_set_isolation(struct samsung_usbphy *sphy, bool on) +{ + void __iomem *reg = NULL; + u32 reg_val; + u32 en_mask = 0; + + if (!sphy->pmuregs) { + dev_warn(sphy->dev, "Can't set pmu isolation\n"); + return; + } + + switch (sphy->drv_data->cpu_type) { + case TYPE_S3C64XX: + /* + * Do nothing: We will add here once S3C64xx goes for DT support + */ + break; + case TYPE_EXYNOS4210: + /* + * Fall through since exynos4210 and exynos5250 have similar + * register architecture: two separate registers for host and + * device phy control with enable bit at position 0. + */ + case TYPE_EXYNOS5250: + if (sphy->phy_type == USB_PHY_TYPE_DEVICE) { + reg = sphy->pmuregs + + sphy->drv_data->devphy_reg_offset; + en_mask = sphy->drv_data->devphy_en_mask; + } else if (sphy->phy_type == USB_PHY_TYPE_HOST) { + reg = sphy->pmuregs + + sphy->drv_data->hostphy_reg_offset; + en_mask = sphy->drv_data->hostphy_en_mask; + } + break; + default: + dev_err(sphy->dev, "Invalid SoC type\n"); + return; + } + + reg_val = readl(reg); + + if (on) + reg_val &= ~en_mask; + else + reg_val |= en_mask; + + writel(reg_val, reg); +} +EXPORT_SYMBOL_GPL(samsung_usbphy_set_isolation); + +/* + * Configure the mode of working of usb-phy here: HOST/DEVICE. + */ +void samsung_usbphy_cfg_sel(struct samsung_usbphy *sphy) +{ + u32 reg; + + if (!sphy->sysreg) { + dev_warn(sphy->dev, "Can't configure specified phy mode\n"); + return; + } + + reg = readl(sphy->sysreg); + + if (sphy->phy_type == USB_PHY_TYPE_DEVICE) + reg &= ~EXYNOS_USB20PHY_CFG_HOST_LINK; + else if (sphy->phy_type == USB_PHY_TYPE_HOST) + reg |= EXYNOS_USB20PHY_CFG_HOST_LINK; + + writel(reg, sphy->sysreg); +} +EXPORT_SYMBOL_GPL(samsung_usbphy_cfg_sel); + +/* + * PHYs are different for USB Device and USB Host. + * This make sure that correct PHY type is selected before + * any operation on PHY. + */ +int samsung_usbphy_set_type(struct usb_phy *phy, + enum samsung_usb_phy_type phy_type) +{ + struct samsung_usbphy *sphy = phy_to_sphy(phy); + + sphy->phy_type = phy_type; + + return 0; +} +EXPORT_SYMBOL_GPL(samsung_usbphy_set_type); + +/* + * Returns reference clock frequency selection value + */ +int samsung_usbphy_get_refclk_freq(struct samsung_usbphy *sphy) +{ + struct clk *ref_clk; + int refclk_freq = 0; + + /* + * In exynos5250 USB host and device PHY use + * external crystal clock XXTI + */ + if (sphy->drv_data->cpu_type == TYPE_EXYNOS5250) + ref_clk = devm_clk_get(sphy->dev, "ext_xtal"); + else + ref_clk = devm_clk_get(sphy->dev, "xusbxti"); + if (IS_ERR(ref_clk)) { + dev_err(sphy->dev, "Failed to get reference clock\n"); + return PTR_ERR(ref_clk); + } + + if (sphy->drv_data->cpu_type == TYPE_EXYNOS5250) { + /* set clock frequency for PLL */ + switch (clk_get_rate(ref_clk)) { + case 9600 * KHZ: + refclk_freq = FSEL_CLKSEL_9600K; + break; + case 10 * MHZ: + refclk_freq = FSEL_CLKSEL_10M; + break; + case 12 * MHZ: + refclk_freq = FSEL_CLKSEL_12M; + break; + case 19200 * KHZ: + refclk_freq = FSEL_CLKSEL_19200K; + break; + case 20 * MHZ: + refclk_freq = FSEL_CLKSEL_20M; + break; + case 50 * MHZ: + refclk_freq = FSEL_CLKSEL_50M; + break; + case 24 * MHZ: + default: + /* default reference clock */ + refclk_freq = FSEL_CLKSEL_24M; + break; + } + } else { + switch (clk_get_rate(ref_clk)) { + case 12 * MHZ: + refclk_freq = PHYCLK_CLKSEL_12M; + break; + case 24 * MHZ: + refclk_freq = PHYCLK_CLKSEL_24M; + break; + case 48 * MHZ: + refclk_freq = PHYCLK_CLKSEL_48M; + break; + default: + if (sphy->drv_data->cpu_type == TYPE_S3C64XX) + refclk_freq = PHYCLK_CLKSEL_48M; + else + refclk_freq = PHYCLK_CLKSEL_24M; + break; + } + } + clk_put(ref_clk); + + return refclk_freq; +} +EXPORT_SYMBOL_GPL(samsung_usbphy_get_refclk_freq); |