1 files changed, 342 insertions, 0 deletions
diff --git a/drivers/usb/phy/phy-samsung-usb3.c b/drivers/usb/phy/phy-samsung-usb3.c
new file mode 100644
index 00000000000..5a9efcbcb53
--- /dev/null
+++ b/drivers/usb/phy/phy-samsung-usb3.c
@@ -0,0 +1,342 @@
+/* linux/drivers/usb/phy/phy-samsung-usb3.c
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *              http://www.samsung.com
+ *
+ * Author: Vivek Gautam <gautam.vivek@samsung.com>
+ *
+ * Samsung USB 3.0 PHY transceiver; talks to DWC3 controller.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/usb/samsung_usb_phy.h>
+#include <linux/platform_data/samsung-usbphy.h>
+
+#include "phy-samsung-usb.h"
+
+/*
+ * Sets the phy clk as EXTREFCLK (XXTI) which is internal clock from clock core.
+ */
+static u32 samsung_usb3phy_set_refclk(struct samsung_usbphy *sphy)
+{
+	u32 reg;
+	u32 refclk;
+
+	refclk = sphy->ref_clk_freq;
+
+	reg = PHYCLKRST_REFCLKSEL_EXT_REFCLK |
+		PHYCLKRST_FSEL(refclk);
+
+	switch (refclk) {
+	case FSEL_CLKSEL_50M:
+		reg |= (PHYCLKRST_MPLL_MULTIPLIER_50M_REF |
+			PHYCLKRST_SSC_REFCLKSEL(0x00));
+		break;
+	case FSEL_CLKSEL_20M:
+		reg |= (PHYCLKRST_MPLL_MULTIPLIER_20MHZ_REF |
+			PHYCLKRST_SSC_REFCLKSEL(0x00));
+		break;
+	case FSEL_CLKSEL_19200K:
+		reg |= (PHYCLKRST_MPLL_MULTIPLIER_19200KHZ_REF |
+			PHYCLKRST_SSC_REFCLKSEL(0x88));
+		break;
+	case FSEL_CLKSEL_24M:
+	default:
+		reg |= (PHYCLKRST_MPLL_MULTIPLIER_24MHZ_REF |
+			PHYCLKRST_SSC_REFCLKSEL(0x88));
+		break;
+	}
+
+	return reg;
+}
+
+static int samsung_exynos5_usb3phy_enable(struct samsung_usbphy *sphy)
+{
+	void __iomem *regs = sphy->regs;
+	u32 phyparam0;
+	u32 phyparam1;
+	u32 linksystem;
+	u32 phybatchg;
+	u32 phytest;
+	u32 phyclkrst;
+
+	/* Reset USB 3.0 PHY */
+	writel(0x0, regs + EXYNOS5_DRD_PHYREG0);
+
+	phyparam0 = readl(regs + EXYNOS5_DRD_PHYPARAM0);
+	/* Select PHY CLK source */
+	phyparam0 &= ~PHYPARAM0_REF_USE_PAD;
+	/* Set Loss-of-Signal Detector sensitivity */
+	phyparam0 &= ~PHYPARAM0_REF_LOSLEVEL_MASK;
+	phyparam0 |= PHYPARAM0_REF_LOSLEVEL;
+	writel(phyparam0, regs + EXYNOS5_DRD_PHYPARAM0);
+
+	writel(0x0, regs + EXYNOS5_DRD_PHYRESUME);
+
+	/*
+	 * Setting the Frame length Adj value[6:1] to default 0x20
+	 * See xHCI 1.0 spec, 5.2.4
+	 */
+	linksystem = LINKSYSTEM_XHCI_VERSION_CONTROL |
+			LINKSYSTEM_FLADJ(0x20);
+	writel(linksystem, regs + EXYNOS5_DRD_LINKSYSTEM);
+
+	phyparam1 = readl(regs + EXYNOS5_DRD_PHYPARAM1);
+	/* Set Tx De-Emphasis level */
+	phyparam1 &= ~PHYPARAM1_PCS_TXDEEMPH_MASK;
+	phyparam1 |= PHYPARAM1_PCS_TXDEEMPH;
+	writel(phyparam1, regs + EXYNOS5_DRD_PHYPARAM1);
+
+	phybatchg = readl(regs + EXYNOS5_DRD_PHYBATCHG);
+	phybatchg |= PHYBATCHG_UTMI_CLKSEL;
+	writel(phybatchg, regs + EXYNOS5_DRD_PHYBATCHG);
+
+	/* PHYTEST POWERDOWN Control */
+	phytest = readl(regs + EXYNOS5_DRD_PHYTEST);
+	phytest &= ~(PHYTEST_POWERDOWN_SSP |
+			PHYTEST_POWERDOWN_HSP);
+	writel(phytest, regs + EXYNOS5_DRD_PHYTEST);
+
+	/* UTMI Power Control */
+	writel(PHYUTMI_OTGDISABLE, regs + EXYNOS5_DRD_PHYUTMI);
+
+	phyclkrst = samsung_usb3phy_set_refclk(sphy);
+
+	phyclkrst |= PHYCLKRST_PORTRESET |
+			/* Digital power supply in normal operating mode */
+			PHYCLKRST_RETENABLEN |
+			/* Enable ref clock for SS function */
+			PHYCLKRST_REF_SSP_EN |
+			/* Enable spread spectrum */
+			PHYCLKRST_SSC_EN |
+			/* Power down HS Bias and PLL blocks in suspend mode */
+			PHYCLKRST_COMMONONN;
+
+	writel(phyclkrst, regs + EXYNOS5_DRD_PHYCLKRST);
+
+	udelay(10);
+
+	phyclkrst &= ~(PHYCLKRST_PORTRESET);
+	writel(phyclkrst, regs + EXYNOS5_DRD_PHYCLKRST);
+
+	return 0;
+}
+
+static void samsung_exynos5_usb3phy_disable(struct samsung_usbphy *sphy)
+{
+	u32 phyutmi;
+	u32 phyclkrst;
+	u32 phytest;
+	void __iomem *regs = sphy->regs;
+
+	phyutmi = PHYUTMI_OTGDISABLE |
+			PHYUTMI_FORCESUSPEND |
+			PHYUTMI_FORCESLEEP;
+	writel(phyutmi, regs + EXYNOS5_DRD_PHYUTMI);
+
+	/* Resetting the PHYCLKRST enable bits to reduce leakage current */
+	phyclkrst = readl(regs + EXYNOS5_DRD_PHYCLKRST);
+	phyclkrst &= ~(PHYCLKRST_REF_SSP_EN |
+			PHYCLKRST_SSC_EN |
+			PHYCLKRST_COMMONONN);
+	writel(phyclkrst, regs + EXYNOS5_DRD_PHYCLKRST);
+
+	/* Control PHYTEST to remove leakage current */
+	phytest = readl(regs + EXYNOS5_DRD_PHYTEST);
+	phytest |= (PHYTEST_POWERDOWN_SSP |
+			PHYTEST_POWERDOWN_HSP);
+	writel(phytest, regs + EXYNOS5_DRD_PHYTEST);
+}
+
+static int samsung_usb3phy_init(struct usb_phy *phy)
+{
+	struct samsung_usbphy *sphy;
+	unsigned long flags;
+	int ret = 0;
+
+	sphy = phy_to_sphy(phy);
+
+	/* Enable the phy clock */
+	ret = clk_prepare_enable(sphy->clk);
+	if (ret) {
+		dev_err(sphy->dev, "%s: clk_prepare_enable failed\n", __func__);
+		return ret;
+	}
+
+	spin_lock_irqsave(&sphy->lock, flags);
+
+	/* setting default phy-type for USB 3.0 */
+	samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_DEVICE);
+
+	/* Disable phy isolation */
+	samsung_usbphy_set_isolation(sphy, false);
+
+	/* Initialize usb phy registers */
+	samsung_exynos5_usb3phy_enable(sphy);
+
+	spin_unlock_irqrestore(&sphy->lock, flags);
+
+	/* Disable the phy clock */
+	clk_disable_unprepare(sphy->clk);
+
+	return ret;
+}
+
+/*
+ * The function passed to the usb driver for phy shutdown
+ */
+static void samsung_usb3phy_shutdown(struct usb_phy *phy)
+{
+	struct samsung_usbphy *sphy;
+	unsigned long flags;
+
+	sphy = phy_to_sphy(phy);
+
+	if (clk_prepare_enable(sphy->clk)) {
+		dev_err(sphy->dev, "%s: clk_prepare_enable failed\n", __func__);
+		return;
+	}
+
+	spin_lock_irqsave(&sphy->lock, flags);
+
+	/* setting default phy-type for USB 3.0 */
+	samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_DEVICE);
+
+	/* De-initialize usb phy registers */
+	samsung_exynos5_usb3phy_disable(sphy);
+
+	/* Enable phy isolation */
+	samsung_usbphy_set_isolation(sphy, true);
+
+	spin_unlock_irqrestore(&sphy->lock, flags);
+
+	clk_disable_unprepare(sphy->clk);
+}
+
+static int samsung_usb3phy_probe(struct platform_device *pdev)
+{
+	struct samsung_usbphy *sphy;
+	struct samsung_usbphy_data *pdata = pdev->dev.platform_data;
+	struct device *dev = &pdev->dev;
+	struct resource *phy_mem;
+	void __iomem	*phy_base;
+	struct clk *clk;
+	int ret;
+
+	phy_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	phy_base = devm_ioremap_resource(dev, phy_mem);
+	if (IS_ERR(phy_base))
+		return PTR_ERR(phy_base);
+
+	sphy = devm_kzalloc(dev, sizeof(*sphy), GFP_KERNEL);
+	if (!sphy)
+		return -ENOMEM;
+
+	clk = devm_clk_get(dev, "usbdrd30");
+	if (IS_ERR(clk)) {
+		dev_err(dev, "Failed to get device clock\n");
+		return PTR_ERR(clk);
+	}
+
+	sphy->dev = dev;
+
+	if (dev->of_node) {
+		ret = samsung_usbphy_parse_dt(sphy);
+		if (ret < 0)
+			return ret;
+	} else {
+		if (!pdata) {
+			dev_err(dev, "no platform data specified\n");
+			return -EINVAL;
+		}
+	}
+
+	sphy->plat		= pdata;
+	sphy->regs		= phy_base;
+	sphy->clk		= clk;
+	sphy->phy.dev		= sphy->dev;
+	sphy->phy.label		= "samsung-usb3phy";
+	sphy->phy.init		= samsung_usb3phy_init;
+	sphy->phy.shutdown	= samsung_usb3phy_shutdown;
+	sphy->drv_data		= samsung_usbphy_get_driver_data(pdev);
+	sphy->ref_clk_freq	= samsung_usbphy_get_refclk_freq(sphy);
+
+	spin_lock_init(&sphy->lock);
+
+	platform_set_drvdata(pdev, sphy);
+
+	return usb_add_phy(&sphy->phy, USB_PHY_TYPE_USB3);
+}
+
+static int samsung_usb3phy_remove(struct platform_device *pdev)
+{
+	struct samsung_usbphy *sphy = platform_get_drvdata(pdev);
+
+	usb_remove_phy(&sphy->phy);
+
+	if (sphy->pmuregs)
+		iounmap(sphy->pmuregs);
+	if (sphy->sysreg)
+		iounmap(sphy->sysreg);
+
+	return 0;
+}
+
+static struct samsung_usbphy_drvdata usb3phy_exynos5 = {
+	.cpu_type		= TYPE_EXYNOS5250,
+	.devphy_en_mask		= EXYNOS_USBPHY_ENABLE,
+};
+
+#ifdef CONFIG_OF
+static const struct of_device_id samsung_usbphy_dt_match[] = {
+	{
+		.compatible = "samsung,exynos5250-usb3phy",
+		.data = &usb3phy_exynos5
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, samsung_usbphy_dt_match);
+#endif
+
+static struct platform_device_id samsung_usbphy_driver_ids[] = {
+	{
+		.name		= "exynos5250-usb3phy",
+		.driver_data	= (unsigned long)&usb3phy_exynos5,
+	},
+	{},
+};
+
+MODULE_DEVICE_TABLE(platform, samsung_usbphy_driver_ids);
+
+static struct platform_driver samsung_usb3phy_driver = {
+	.probe		= samsung_usb3phy_probe,
+	.remove		= samsung_usb3phy_remove,
+	.id_table	= samsung_usbphy_driver_ids,
+	.driver		= {
+		.name	= "samsung-usb3phy",
+		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(samsung_usbphy_dt_match),
+	},
+};
+
+module_platform_driver(samsung_usb3phy_driver);
+
+MODULE_DESCRIPTION("Samsung USB 3.0 phy controller");
+MODULE_AUTHOR("Vivek Gautam <gautam.vivek@samsung.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:samsung-usb3phy");