summaryrefslogtreecommitdiffstats
path: root/drivers/usb/phy
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/phy')
-rw-r--r--drivers/usb/phy/Kconfig12
-rw-r--r--drivers/usb/phy/Makefile1
-rw-r--r--drivers/usb/phy/of.c47
-rw-r--r--drivers/usb/phy/phy-ab8500-usb.c846
-rw-r--r--drivers/usb/phy/phy-msm-usb.c38
-rw-r--r--drivers/usb/phy/phy-nop.c2
-rw-r--r--drivers/usb/phy/phy-omap-usb3.c7
-rw-r--r--drivers/usb/phy/phy-rcar-usb.c128
-rw-r--r--drivers/usb/phy/phy-samsung-usb.c159
-rw-r--r--drivers/usb/phy/phy-samsung-usb.h24
-rw-r--r--drivers/usb/phy/phy-samsung-usb2.c62
-rw-r--r--drivers/usb/phy/phy-samsung-usb3.c23
-rw-r--r--drivers/usb/phy/phy-tegra-usb.c354
-rw-r--r--drivers/usb/phy/phy-ulpi-viewport.c2
14 files changed, 1288 insertions, 417 deletions
diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index 2311b1e4e43..3622fff8b79 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -92,7 +92,7 @@ config OMAP_USB3
on/off the PHY.
config SAMSUNG_USBPHY
- tristate "Samsung USB PHY Driver"
+ tristate
help
Enable this to support Samsung USB phy helper driver for Samsung SoCs.
This driver provides common interface to interact, for Samsung USB 2.0 PHY
@@ -186,15 +186,15 @@ config USB_MXS_PHY
MXS Phy is used by some of the i.MX SoCs, for example imx23/28/6x.
config USB_RCAR_PHY
- tristate "Renesas R-Car USB phy support"
+ tristate "Renesas R-Car USB PHY support"
depends on USB || USB_GADGET
help
- Say Y here to add support for the Renesas R-Car USB phy driver.
- This chip is typically used as USB phy for USB host, gadget.
- This driver supports: R8A7779
+ Say Y here to add support for the Renesas R-Car USB common PHY driver.
+ This chip is typically used as USB PHY for USB host, gadget.
+ This driver supports R8A7778 and R8A7779.
To compile this driver as a module, choose M here: the
- module will be called rcar-phy.
+ module will be called phy-rcar-usb.
config USB_ULPI
bool "Generic ULPI Transceiver Driver"
diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
index a9169cb1e6f..070eca3af18 100644
--- a/drivers/usb/phy/Makefile
+++ b/drivers/usb/phy/Makefile
@@ -5,6 +5,7 @@
ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG
obj-$(CONFIG_USB_PHY) += phy.o
+obj-$(CONFIG_OF) += of.o
# transceiver drivers, keep the list sorted
diff --git a/drivers/usb/phy/of.c b/drivers/usb/phy/of.c
new file mode 100644
index 00000000000..7ea0154da9d
--- /dev/null
+++ b/drivers/usb/phy/of.c
@@ -0,0 +1,47 @@
+/*
+ * USB of helper code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/usb/of.h>
+#include <linux/usb/otg.h>
+
+static const char *const usbphy_modes[] = {
+ [USBPHY_INTERFACE_MODE_UNKNOWN] = "",
+ [USBPHY_INTERFACE_MODE_UTMI] = "utmi",
+ [USBPHY_INTERFACE_MODE_UTMIW] = "utmi_wide",
+ [USBPHY_INTERFACE_MODE_ULPI] = "ulpi",
+ [USBPHY_INTERFACE_MODE_SERIAL] = "serial",
+ [USBPHY_INTERFACE_MODE_HSIC] = "hsic",
+};
+
+/**
+ * of_usb_get_phy_mode - Get phy mode for given device_node
+ * @np: Pointer to the given device_node
+ *
+ * The function gets phy interface string from property 'phy_type',
+ * and returns the correspondig enum usb_phy_interface
+ */
+enum usb_phy_interface of_usb_get_phy_mode(struct device_node *np)
+{
+ const char *phy_type;
+ int err, i;
+
+ err = of_property_read_string(np, "phy_type", &phy_type);
+ if (err < 0)
+ return USBPHY_INTERFACE_MODE_UNKNOWN;
+
+ for (i = 0; i < ARRAY_SIZE(usbphy_modes); i++)
+ if (!strcmp(phy_type, usbphy_modes[i]))
+ return i;
+
+ return USBPHY_INTERFACE_MODE_UNKNOWN;
+}
+EXPORT_SYMBOL_GPL(of_usb_get_phy_mode);
diff --git a/drivers/usb/phy/phy-ab8500-usb.c b/drivers/usb/phy/phy-ab8500-usb.c
index e5eb1b5a04e..087402350b6 100644
--- a/drivers/usb/phy/phy-ab8500-usb.c
+++ b/drivers/usb/phy/phy-ab8500-usb.c
@@ -1,10 +1,12 @@
/*
* drivers/usb/otg/ab8500_usb.c
*
- * USB transceiver driver for AB8500 chip
+ * USB transceiver driver for AB8500 family chips
*
- * Copyright (C) 2010 ST-Ericsson AB
+ * Copyright (C) 2010-2013 ST-Ericsson AB
* Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
+ * Avinash Kumar <avinash.kumar@stericsson.com>
+ * Thirupathi Chippakurthy <thirupathi.chippakurthy@stericsson.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -29,6 +31,8 @@
#include <linux/notifier.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
#include <linux/mfd/abx500.h>
#include <linux/mfd/abx500/ab8500.h>
#include <linux/usb/musb-ux500.h>
@@ -41,21 +45,34 @@
/* Bank AB8500_USB */
#define AB8500_USB_LINE_STAT_REG 0x80
#define AB8505_USB_LINE_STAT_REG 0x94
+#define AB8540_USB_LINK_STAT_REG 0x94
+#define AB9540_USB_LINK_STAT_REG 0x94
+#define AB8540_USB_OTG_CTL_REG 0x87
#define AB8500_USB_PHY_CTRL_REG 0x8A
+#define AB8540_VBUS_CTRL_REG 0x82
/* Bank AB8500_DEVELOPMENT */
#define AB8500_BANK12_ACCESS 0x00
/* Bank AB8500_DEBUG */
+#define AB8540_DEBUG 0x32
#define AB8500_USB_PHY_TUNE1 0x05
#define AB8500_USB_PHY_TUNE2 0x06
#define AB8500_USB_PHY_TUNE3 0x07
+/* Bank AB8500_INTERRUPT */
+#define AB8500_IT_SOURCE2_REG 0x01
+
#define AB8500_BIT_OTG_STAT_ID (1 << 0)
#define AB8500_BIT_PHY_CTRL_HOST_EN (1 << 0)
#define AB8500_BIT_PHY_CTRL_DEVICE_EN (1 << 1)
#define AB8500_BIT_WD_CTRL_ENABLE (1 << 0)
#define AB8500_BIT_WD_CTRL_KICK (1 << 1)
+#define AB8500_BIT_SOURCE2_VBUSDET (1 << 7)
+#define AB8540_BIT_OTG_CTL_VBUS_VALID_ENA (1 << 0)
+#define AB8540_BIT_OTG_CTL_ID_HOST_ENA (1 << 1)
+#define AB8540_BIT_OTG_CTL_ID_DEV_ENA (1 << 5)
+#define AB8540_BIT_VBUS_CTRL_CHARG_DET_ENA (1 << 0)
#define AB8500_WD_KICK_DELAY_US 100 /* usec */
#define AB8500_WD_V11_DISABLE_DELAY_US 100 /* usec */
@@ -112,6 +129,68 @@ enum ab8505_usb_link_status {
USB_LINK_MOTOROLA_FACTORY_CBL_PHY_EN_8505,
};
+enum ab8540_usb_link_status {
+ USB_LINK_NOT_CONFIGURED_8540 = 0,
+ USB_LINK_STD_HOST_NC_8540,
+ USB_LINK_STD_HOST_C_NS_8540,
+ USB_LINK_STD_HOST_C_S_8540,
+ USB_LINK_CDP_8540,
+ USB_LINK_RESERVED0_8540,
+ USB_LINK_RESERVED1_8540,
+ USB_LINK_DEDICATED_CHG_8540,
+ USB_LINK_ACA_RID_A_8540,
+ USB_LINK_ACA_RID_B_8540,
+ USB_LINK_ACA_RID_C_NM_8540,
+ USB_LINK_RESERVED2_8540,
+ USB_LINK_RESERVED3_8540,
+ USB_LINK_HM_IDGND_8540,
+ USB_LINK_CHARGERPORT_NOT_OK_8540,
+ USB_LINK_CHARGER_DM_HIGH_8540,
+ USB_LINK_PHYEN_NO_VBUS_NO_IDGND_8540,
+ USB_LINK_STD_UPSTREAM_NO_IDGNG_VBUS_8540,
+ USB_LINK_STD_UPSTREAM_8540,
+ USB_LINK_CHARGER_SE1_8540,
+ USB_LINK_CARKIT_CHGR_1_8540,
+ USB_LINK_CARKIT_CHGR_2_8540,
+ USB_LINK_ACA_DOCK_CHGR_8540,
+ USB_LINK_SAMSUNG_BOOT_CBL_PHY_EN_8540,
+ USB_LINK_SAMSUNG_BOOT_CBL_PHY_DISB_8540,
+ USB_LINK_SAMSUNG_UART_CBL_PHY_EN_8540,
+ USB_LINK_SAMSUNG_UART_CBL_PHY_DISB_8540,
+ USB_LINK_MOTOROLA_FACTORY_CBL_PHY_EN_8540
+};
+
+enum ab9540_usb_link_status {
+ USB_LINK_NOT_CONFIGURED_9540 = 0,
+ USB_LINK_STD_HOST_NC_9540,
+ USB_LINK_STD_HOST_C_NS_9540,
+ USB_LINK_STD_HOST_C_S_9540,
+ USB_LINK_CDP_9540,
+ USB_LINK_RESERVED0_9540,
+ USB_LINK_RESERVED1_9540,
+ USB_LINK_DEDICATED_CHG_9540,
+ USB_LINK_ACA_RID_A_9540,
+ USB_LINK_ACA_RID_B_9540,
+ USB_LINK_ACA_RID_C_NM_9540,
+ USB_LINK_RESERVED2_9540,
+ USB_LINK_RESERVED3_9540,
+ USB_LINK_HM_IDGND_9540,
+ USB_LINK_CHARGERPORT_NOT_OK_9540,
+ USB_LINK_CHARGER_DM_HIGH_9540,
+ USB_LINK_PHYEN_NO_VBUS_NO_IDGND_9540,
+ USB_LINK_STD_UPSTREAM_NO_IDGNG_VBUS_9540,
+ USB_LINK_STD_UPSTREAM_9540,
+ USB_LINK_CHARGER_SE1_9540,
+ USB_LINK_CARKIT_CHGR_1_9540,
+ USB_LINK_CARKIT_CHGR_2_9540,
+ USB_LINK_ACA_DOCK_CHGR_9540,
+ USB_LINK_SAMSUNG_BOOT_CBL_PHY_EN_9540,
+ USB_LINK_SAMSUNG_BOOT_CBL_PHY_DISB_9540,
+ USB_LINK_SAMSUNG_UART_CBL_PHY_EN_9540,
+ USB_LINK_SAMSUNG_UART_CBL_PHY_DISB_9540,
+ USB_LINK_MOTOROLA_FACTORY_CBL_PHY_EN_9540
+};
+
enum ab8500_usb_mode {
USB_IDLE = 0,
USB_PERIPHERAL,
@@ -119,13 +198,30 @@ enum ab8500_usb_mode {
USB_DEDICATED_CHG
};
+/* Register USB_LINK_STATUS interrupt */
+#define AB8500_USB_FLAG_USE_LINK_STATUS_IRQ (1 << 0)
+/* Register ID_WAKEUP_F interrupt */
+#define AB8500_USB_FLAG_USE_ID_WAKEUP_IRQ (1 << 1)
+/* Register VBUS_DET_F interrupt */
+#define AB8500_USB_FLAG_USE_VBUS_DET_IRQ (1 << 2)
+/* Driver is using the ab-iddet driver*/
+#define AB8500_USB_FLAG_USE_AB_IDDET (1 << 3)
+/* Enable setting regulators voltage */
+#define AB8500_USB_FLAG_REGULATOR_SET_VOLTAGE (1 << 4)
+/* Enable the check_vbus_status workaround */
+#define AB8500_USB_FLAG_USE_CHECK_VBUS_STATUS (1 << 5)
+/* Enable the vbus host workaround */
+#define AB8500_USB_FLAG_USE_VBUS_HOST_QUIRK (1 << 6)
+
struct ab8500_usb {
struct usb_phy phy;
struct device *dev;
struct ab8500 *ab8500;
unsigned vbus_draw;
struct work_struct phy_dis_work;
+ struct work_struct vbus_event_work;
enum ab8500_usb_mode mode;
+ struct clk *sysclk;
struct regulator *v_ape;
struct regulator *v_musb;
struct regulator *v_ulpi;
@@ -133,6 +229,8 @@ struct ab8500_usb {
int previous_link_status_state;
struct pinctrl *pinctrl;
struct pinctrl_state *pins_sleep;
+ bool enabled_charging_detection;
+ unsigned int flags;
};
static inline struct ab8500_usb *phy_to_ab(struct usb_phy *x)
@@ -171,7 +269,7 @@ static void ab8500_usb_regulator_enable(struct ab8500_usb *ab)
if (ret)
dev_err(ab->dev, "Failed to enable v-ape\n");
- if (!is_ab8500_2p0_or_earlier(ab->ab8500)) {
+ if (ab->flags & AB8500_USB_FLAG_REGULATOR_SET_VOLTAGE) {
ab->saved_v_ulpi = regulator_get_voltage(ab->v_ulpi);
if (ab->saved_v_ulpi < 0)
dev_err(ab->dev, "Failed to get v_ulpi voltage\n");
@@ -191,7 +289,7 @@ static void ab8500_usb_regulator_enable(struct ab8500_usb *ab)
if (ret)
dev_err(ab->dev, "Failed to enable vddulpivio18\n");
- if (!is_ab8500_2p0_or_earlier(ab->ab8500)) {
+ if (ab->flags & AB8500_USB_FLAG_REGULATOR_SET_VOLTAGE) {
volt = regulator_get_voltage(ab->v_ulpi);
if ((volt != 1300000) && (volt != 1350000))
dev_err(ab->dev, "Vintcore is not set to 1.3V volt=%d\n",
@@ -212,7 +310,7 @@ static void ab8500_usb_regulator_disable(struct ab8500_usb *ab)
regulator_disable(ab->v_ulpi);
/* USB is not the only consumer of Vintcore, restore old settings */
- if (!is_ab8500_2p0_or_earlier(ab->ab8500)) {
+ if (ab->flags & AB8500_USB_FLAG_REGULATOR_SET_VOLTAGE) {
if (ab->saved_v_ulpi > 0) {
ret = regulator_set_voltage(ab->v_ulpi,
ab->saved_v_ulpi, ab->saved_v_ulpi);
@@ -252,11 +350,23 @@ static void ab8500_usb_phy_enable(struct ab8500_usb *ab, bool sel_host)
if (IS_ERR(ab->pinctrl))
dev_err(ab->dev, "could not get/set default pinstate\n");
+ if (clk_prepare_enable(ab->sysclk))
+ dev_err(ab->dev, "can't prepare/enable clock\n");
+
ab8500_usb_regulator_enable(ab);
abx500_mask_and_set_register_interruptible(ab->dev,
AB8500_USB, AB8500_USB_PHY_CTRL_REG,
bit, bit);
+
+ if (ab->flags & AB8500_USB_FLAG_USE_VBUS_HOST_QUIRK) {
+ if (sel_host)
+ abx500_set_register_interruptible(ab->dev,
+ AB8500_USB, AB8540_USB_OTG_CTL_REG,
+ AB8540_BIT_OTG_CTL_VBUS_VALID_ENA |
+ AB8540_BIT_OTG_CTL_ID_HOST_ENA |
+ AB8540_BIT_OTG_CTL_ID_DEV_ENA);
+ }
}
static void ab8500_usb_phy_disable(struct ab8500_usb *ab, bool sel_host)
@@ -274,6 +384,8 @@ static void ab8500_usb_phy_disable(struct ab8500_usb *ab, bool sel_host)
/* Needed to disable the phy.*/
ab8500_usb_wd_workaround(ab);
+ clk_disable_unprepare(ab->sysclk);
+
ab8500_usb_regulator_disable(ab);
if (!IS_ERR(ab->pinctrl)) {
@@ -286,7 +398,8 @@ static void ab8500_usb_phy_disable(struct ab8500_usb *ab, bool sel_host)
else if (pinctrl_select_state(ab->pinctrl, ab->pins_sleep))
dev_err(ab->dev, "could not set pins to sleep state\n");
- /* as USB pins are shared with idddet, release them to allow
+ /*
+ * as USB pins are shared with iddet, release them to allow
* iddet to request them
*/
pinctrl_put(ab->pinctrl);
@@ -298,6 +411,254 @@ static void ab8500_usb_phy_disable(struct ab8500_usb *ab, bool sel_host)
#define ab8500_usb_peri_phy_en(ab) ab8500_usb_phy_enable(ab, false)
#define ab8500_usb_peri_phy_dis(ab) ab8500_usb_phy_disable(ab, false)
+static int ab9540_usb_link_status_update(struct ab8500_usb *ab,
+ enum ab9540_usb_link_status lsts)
+{
+ enum ux500_musb_vbus_id_status event = 0;
+
+ dev_dbg(ab->dev, "ab9540_usb_link_status_update %d\n", lsts);
+
+ if (ab->previous_link_status_state == USB_LINK_HM_IDGND_9540 &&
+ (lsts == USB_LINK_STD_HOST_C_NS_9540 ||
+ lsts == USB_LINK_STD_HOST_NC_9540))
+ return 0;
+
+ if (ab->previous_link_status_state == USB_LINK_ACA_RID_A_9540 &&
+ (lsts == USB_LINK_STD_HOST_NC_9540))
+ return 0;
+
+ ab->previous_link_status_state = lsts;
+
+ switch (lsts) {
+ case USB_LINK_ACA_RID_B_9540:
+ event = UX500_MUSB_RIDB;
+ case USB_LINK_NOT_CONFIGURED_9540:
+ case USB_LINK_RESERVED0_9540:
+ case USB_LINK_RESERVED1_9540:
+ case USB_LINK_RESERVED2_9540:
+ case USB_LINK_RESERVED3_9540:
+ if (ab->mode == USB_PERIPHERAL)
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ UX500_MUSB_CLEAN, &ab->vbus_draw);
+ ab->mode = USB_IDLE;
+ ab->phy.otg->default_a = false;
+ ab->vbus_draw = 0;
+ if (event != UX500_MUSB_RIDB)
+ event = UX500_MUSB_NONE;
+ /* Fallback to default B_IDLE as nothing is connected. */
+ ab->phy.state = OTG_STATE_B_IDLE;
+ break;
+
+ case USB_LINK_ACA_RID_C_NM_9540:
+ event = UX500_MUSB_RIDC;
+ case USB_LINK_STD_HOST_NC_9540:
+ case USB_LINK_STD_HOST_C_NS_9540:
+ case USB_LINK_STD_HOST_C_S_9540:
+ case USB_LINK_CDP_9540:
+ if (ab->mode == USB_HOST) {
+ ab->mode = USB_PERIPHERAL;
+ ab8500_usb_host_phy_dis(ab);
+ ab8500_usb_peri_phy_en(ab);
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ UX500_MUSB_PREPARE, &ab->vbus_draw);
+ }
+ if (ab->mode == USB_IDLE) {
+ ab->mode = USB_PERIPHERAL;
+ ab8500_usb_peri_phy_en(ab);
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ UX500_MUSB_PREPARE, &ab->vbus_draw);
+ }
+ if (event != UX500_MUSB_RIDC)
+ event = UX500_MUSB_VBUS;
+ break;
+
+ case USB_LINK_ACA_RID_A_9540:
+ event = UX500_MUSB_RIDA;
+ case USB_LINK_HM_IDGND_9540:
+ case USB_LINK_STD_UPSTREAM_9540:
+ if (ab->mode == USB_PERIPHERAL) {
+ ab->mode = USB_HOST;
+ ab8500_usb_peri_phy_dis(ab);
+ ab8500_usb_host_phy_en(ab);
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ UX500_MUSB_PREPARE, &ab->vbus_draw);
+ }
+ if (ab->mode == USB_IDLE) {
+ ab->mode = USB_HOST;
+ ab8500_usb_host_phy_en(ab);
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ UX500_MUSB_PREPARE, &ab->vbus_draw);
+ }
+ ab->phy.otg->default_a = true;
+ if (event != UX500_MUSB_RIDA)
+ event = UX500_MUSB_ID;
+
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ event, &ab->vbus_draw);
+ break;
+
+ case USB_LINK_DEDICATED_CHG_9540:
+ ab->mode = USB_DEDICATED_CHG;
+ event = UX500_MUSB_CHARGER;
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ event, &ab->vbus_draw);
+ break;
+
+ case USB_LINK_PHYEN_NO_VBUS_NO_IDGND_9540:
+ case USB_LINK_STD_UPSTREAM_NO_IDGNG_VBUS_9540:
+ if (!(is_ab9540_2p0_or_earlier(ab->ab8500))) {
+ event = UX500_MUSB_NONE;
+ if (ab->mode == USB_HOST) {
+ ab->phy.otg->default_a = false;
+ ab->vbus_draw = 0;
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ event, &ab->vbus_draw);
+ ab8500_usb_host_phy_dis(ab);
+ ab->mode = USB_IDLE;
+ }
+ if (ab->mode == USB_PERIPHERAL) {
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ event, &ab->vbus_draw);
+ ab8500_usb_peri_phy_dis(ab);
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ UX500_MUSB_CLEAN,
+ &ab->vbus_draw);
+ ab->mode = USB_IDLE;
+ ab->phy.otg->default_a = false;
+ ab->vbus_draw = 0;
+ }
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+static int ab8540_usb_link_status_update(struct ab8500_usb *ab,
+ enum ab8540_usb_link_status lsts)
+{
+ enum ux500_musb_vbus_id_status event = 0;
+
+ dev_dbg(ab->dev, "ab8540_usb_link_status_update %d\n", lsts);
+
+ if (ab->enabled_charging_detection) {
+ /* Disable USB Charger detection */
+ abx500_mask_and_set_register_interruptible(ab->dev,
+ AB8500_USB, AB8540_VBUS_CTRL_REG,
+ AB8540_BIT_VBUS_CTRL_CHARG_DET_ENA, 0x00);
+ ab->enabled_charging_detection = false;
+ }
+
+ /*
+ * Spurious link_status interrupts are seen in case of a
+ * disconnection of a device in IDGND and RIDA stage
+ */
+ if (ab->previous_link_status_state == USB_LINK_HM_IDGND_8540 &&
+ (lsts == USB_LINK_STD_HOST_C_NS_8540 ||
+ lsts == USB_LINK_STD_HOST_NC_8540))
+ return 0;
+
+ if (ab->previous_link_status_state == USB_LINK_ACA_RID_A_8540 &&
+ (lsts == USB_LINK_STD_HOST_NC_8540))
+ return 0;
+
+ ab->previous_link_status_state = lsts;
+
+ switch (lsts) {
+ case USB_LINK_ACA_RID_B_8540:
+ event = UX500_MUSB_RIDB;
+ case USB_LINK_NOT_CONFIGURED_8540:
+ case USB_LINK_RESERVED0_8540:
+ case USB_LINK_RESERVED1_8540:
+ case USB_LINK_RESERVED2_8540:
+ case USB_LINK_RESERVED3_8540:
+ ab->mode = USB_IDLE;
+ ab->phy.otg->default_a = false;
+ ab->vbus_draw = 0;
+ if (event != UX500_MUSB_RIDB)
+ event = UX500_MUSB_NONE;
+ /*
+ * Fallback to default B_IDLE as nothing
+ * is connected
+ */
+ ab->phy.state = OTG_STATE_B_IDLE;
+ break;
+
+ case USB_LINK_ACA_RID_C_NM_8540:
+ event = UX500_MUSB_RIDC;
+ case USB_LINK_STD_HOST_NC_8540:
+ case USB_LINK_STD_HOST_C_NS_8540:
+ case USB_LINK_STD_HOST_C_S_8540:
+ case USB_LINK_CDP_8540:
+ if (ab->mode == USB_IDLE) {
+ ab->mode = USB_PERIPHERAL;
+ ab8500_usb_peri_phy_en(ab);
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ UX500_MUSB_PREPARE, &ab->vbus_draw);
+ }
+ if (event != UX500_MUSB_RIDC)
+ event = UX500_MUSB_VBUS;
+ break;
+
+ case USB_LINK_ACA_RID_A_8540:
+ case USB_LINK_ACA_DOCK_CHGR_8540:
+ event = UX500_MUSB_RIDA;
+ case USB_LINK_HM_IDGND_8540:
+ case USB_LINK_STD_UPSTREAM_8540:
+ if (ab->mode == USB_IDLE) {
+ ab->mode = USB_HOST;
+ ab8500_usb_host_phy_en(ab);
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ UX500_MUSB_PREPARE, &ab->vbus_draw);
+ }
+ ab->phy.otg->default_a = true;
+ if (event != UX500_MUSB_RIDA)
+ event = UX500_MUSB_ID;
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ event, &ab->vbus_draw);
+ break;
+
+ case USB_LINK_DEDICATED_CHG_8540:
+ ab->mode = USB_DEDICATED_CHG;
+ event = UX500_MUSB_CHARGER;
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ event, &ab->vbus_draw);
+ break;
+
+ case USB_LINK_PHYEN_NO_VBUS_NO_IDGND_8540:
+ case USB_LINK_STD_UPSTREAM_NO_IDGNG_VBUS_8540:
+ event = UX500_MUSB_NONE;
+ if (ab->mode == USB_HOST) {
+ ab->phy.otg->default_a = false;
+ ab->vbus_draw = 0;
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ event, &ab->vbus_draw);
+ ab8500_usb_host_phy_dis(ab);
+ ab->mode = USB_IDLE;
+ }
+ if (ab->mode == USB_PERIPHERAL) {
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ event, &ab->vbus_draw);
+ ab8500_usb_peri_phy_dis(ab);
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ UX500_MUSB_CLEAN, &ab->vbus_draw);
+ ab->mode = USB_IDLE;
+ ab->phy.otg->default_a = false;
+ ab->vbus_draw = 0;
+ }
+ break;
+
+ default:
+ event = UX500_MUSB_NONE;
+ break;
+ }
+
+ return 0;
+}
+
static int ab8505_usb_link_status_update(struct ab8500_usb *ab,
enum ab8505_usb_link_status lsts)
{
@@ -498,6 +859,20 @@ static int abx500_usb_link_status_update(struct ab8500_usb *ab)
AB8500_USB, AB8505_USB_LINE_STAT_REG, &reg);
lsts = (reg >> 3) & 0x1F;
ret = ab8505_usb_link_status_update(ab, lsts);
+ } else if (is_ab8540(ab->ab8500)) {
+ enum ab8540_usb_link_status lsts;
+
+ abx500_get_register_interruptible(ab->dev,
+ AB8500_USB, AB8540_USB_LINK_STAT_REG, &reg);
+ lsts = (reg >> 3) & 0xFF;
+ ret = ab8540_usb_link_status_update(ab, lsts);
+ } else if (is_ab9540(ab->ab8500)) {
+ enum ab9540_usb_link_status lsts;
+
+ abx500_get_register_interruptible(ab->dev,
+ AB8500_USB, AB9540_USB_LINK_STAT_REG, &reg);
+ lsts = (reg >> 3) & 0xFF;
+ ret = ab9540_usb_link_status_update(ab, lsts);
}
return ret;
@@ -553,7 +928,7 @@ static irqreturn_t ab8500_usb_disconnect_irq(int irq, void *data)
static irqreturn_t ab8500_usb_link_status_irq(int irq, void *data)
{
- struct ab8500_usb *ab = (struct ab8500_usb *) data;
+ struct ab8500_usb *ab = (struct ab8500_usb *)data;
abx500_usb_link_status_update(ab);
@@ -572,6 +947,69 @@ static void ab8500_usb_phy_disable_work(struct work_struct *work)
ab8500_usb_peri_phy_dis(ab);
}
+/* Check if VBUS is set and linkstatus has not detected a cable. */
+static bool ab8500_usb_check_vbus_status(struct ab8500_usb *ab)
+{
+ u8 isource2;
+ u8 reg;
+ enum ab8540_usb_link_status lsts;
+
+ abx500_get_register_interruptible(ab->dev,
+ AB8500_INTERRUPT, AB8500_IT_SOURCE2_REG,
+ &isource2);
+
+ /* If Vbus is below 3.6V abort */
+ if (!(isource2 & AB8500_BIT_SOURCE2_VBUSDET))
+ return false;
+
+ abx500_get_register_interruptible(ab->dev,
+ AB8500_USB, AB8540_USB_LINK_STAT_REG,
+ &reg);
+
+ lsts = (reg >> 3) & 0xFF;
+
+ /* Check if linkstatus has detected a cable */
+ if (lsts)
+ return false;
+
+ return true;
+}
+
+/* re-trigger charger detection again with watchdog re-kick. */
+static void ab8500_usb_vbus_turn_on_event_work(struct work_struct *work)
+{
+ struct ab8500_usb *ab = container_of(work, struct ab8500_usb,
+ vbus_event_work);
+
+ if (ab->mode != USB_IDLE)
+ return;
+
+ abx500_set_register_interruptible(ab->dev,
+ AB8500_SYS_CTRL2_BLOCK, AB8500_MAIN_WD_CTRL_REG,
+ AB8500_BIT_WD_CTRL_ENABLE);
+
+ udelay(100);
+
+ abx500_set_register_interruptible(ab->dev,
+ AB8500_SYS_CTRL2_BLOCK, AB8500_MAIN_WD_CTRL_REG,
+ AB8500_BIT_WD_CTRL_ENABLE | AB8500_BIT_WD_CTRL_KICK);
+
+ udelay(100);
+
+ /* Disable Main watchdog */
+ abx500_set_register_interruptible(ab->dev,
+ AB8500_SYS_CTRL2_BLOCK, AB8500_MAIN_WD_CTRL_REG,
+ 0x0);
+
+ /* Enable USB Charger detection */
+ abx500_mask_and_set_register_interruptible(ab->dev,
+ AB8500_USB, AB8540_VBUS_CTRL_REG,
+ AB8540_BIT_VBUS_CTRL_CHARG_DET_ENA,
+ AB8540_BIT_VBUS_CTRL_CHARG_DET_ENA);
+
+ ab->enabled_charging_detection = true;
+}
+
static unsigned ab8500_eyediagram_workaroud(struct ab8500_usb *ab, unsigned mA)
{
/*
@@ -627,7 +1065,7 @@ static int ab8500_usb_set_peripheral(struct usb_otg *otg,
* is fixed.
*/
- if ((ab->mode != USB_IDLE) && (!gadget)) {
+ if ((ab->mode != USB_IDLE) && !gadget) {
ab->mode = USB_IDLE;
schedule_work(&ab->phy_dis_work);
}
@@ -651,7 +1089,7 @@ static int ab8500_usb_set_host(struct usb_otg *otg, struct usb_bus *host)
* is fixed.
*/
- if ((ab->mode != USB_IDLE) && (!host)) {
+ if ((ab->mode != USB_IDLE) && !host) {
ab->mode = USB_IDLE;
schedule_work(&ab->phy_dis_work);
}
@@ -659,6 +1097,33 @@ static int ab8500_usb_set_host(struct usb_otg *otg, struct usb_bus *host)
return 0;
}
+static void ab8500_usb_restart_phy(struct ab8500_usb *ab)
+{
+ abx500_mask_and_set_register_interruptible(ab->dev,
+ AB8500_USB, AB8500_USB_PHY_CTRL_REG,
+ AB8500_BIT_PHY_CTRL_DEVICE_EN,
+ AB8500_BIT_PHY_CTRL_DEVICE_EN);
+
+ udelay(100);
+
+ abx500_mask_and_set_register_interruptible(ab->dev,
+ AB8500_USB, AB8500_USB_PHY_CTRL_REG,
+ AB8500_BIT_PHY_CTRL_DEVICE_EN,
+ 0);
+
+ abx500_mask_and_set_register_interruptible(ab->dev,
+ AB8500_USB, AB8500_USB_PHY_CTRL_REG,
+ AB8500_BIT_PHY_CTRL_HOST_EN,
+ AB8500_BIT_PHY_CTRL_HOST_EN);
+
+ udelay(100);
+
+ abx500_mask_and_set_register_interruptible(ab->dev,
+ AB8500_USB, AB8500_USB_PHY_CTRL_REG,
+ AB8500_BIT_PHY_CTRL_HOST_EN,
+ 0);
+}
+
static int ab8500_usb_regulator_get(struct ab8500_usb *ab)
{
int err;
@@ -693,48 +1158,197 @@ static int ab8500_usb_irq_setup(struct platform_device *pdev,
int err;
int irq;
- irq = platform_get_irq_byname(pdev, "USB_LINK_STATUS");
- if (irq < 0) {
- dev_err(&pdev->dev, "Link status irq not found\n");
- return irq;
- }
- err = devm_request_threaded_irq(&pdev->dev, irq, NULL,
- ab8500_usb_link_status_irq,
- IRQF_NO_SUSPEND | IRQF_SHARED, "usb-link-status", ab);
- if (err < 0) {
- dev_err(ab->dev, "request_irq failed for link status irq\n");
- return err;
+ if (ab->flags & AB8500_USB_FLAG_USE_LINK_STATUS_IRQ) {
+ irq = platform_get_irq_byname(pdev, "USB_LINK_STATUS");
+ if (irq < 0) {
+ dev_err(&pdev->dev, "Link status irq not found\n");
+ return irq;
+ }
+ err = devm_request_threaded_irq(&pdev->dev, irq, NULL,
+ ab8500_usb_link_status_irq,
+ IRQF_NO_SUSPEND | IRQF_SHARED,
+ "usb-link-status", ab);
+ if (err < 0) {
+ dev_err(ab->dev, "request_irq failed for link status irq\n");
+ return err;
+ }
}
- irq = platform_get_irq_byname(pdev, "ID_WAKEUP_F");
- if (irq < 0) {
- dev_err(&pdev->dev, "ID fall irq not found\n");
- return irq;
- }
- err = devm_request_threaded_irq(&pdev->dev, irq, NULL,
- ab8500_usb_disconnect_irq,
- IRQF_NO_SUSPEND | IRQF_SHARED, "usb-id-fall", ab);
- if (err < 0) {
- dev_err(ab->dev, "request_irq failed for ID fall irq\n");
- return err;
+ if (ab->flags & AB8500_USB_FLAG_USE_ID_WAKEUP_IRQ) {
+ irq = platform_get_irq_byname(pdev, "ID_WAKEUP_F");
+ if (irq < 0) {
+ dev_err(&pdev->dev, "ID fall irq not found\n");
+ return irq;
+ }
+ err = devm_request_threaded_irq(&pdev->dev, irq, NULL,
+ ab8500_usb_disconnect_irq,
+ IRQF_NO_SUSPEND | IRQF_SHARED,
+ "usb-id-fall", ab);
+ if (err < 0) {
+ dev_err(ab->dev, "request_irq failed for ID fall irq\n");
+ return err;
+ }
}
- irq = platform_get_irq_byname(pdev, "VBUS_DET_F");
- if (irq < 0) {
- dev_err(&pdev->dev, "VBUS fall irq not found\n");
- return irq;
- }
- err = devm_request_threaded_irq(&pdev->dev, irq, NULL,
- ab8500_usb_disconnect_irq,
- IRQF_NO_SUSPEND | IRQF_SHARED, "usb-vbus-fall", ab);
- if (err < 0) {
- dev_err(ab->dev, "request_irq failed for Vbus fall irq\n");
- return err;
+ if (ab->flags & AB8500_USB_FLAG_USE_VBUS_DET_IRQ) {
+ irq = platform_get_irq_byname(pdev, "VBUS_DET_F");
+ if (irq < 0) {
+ dev_err(&pdev->dev, "VBUS fall irq not found\n");
+ return irq;
+ }
+ err = devm_request_threaded_irq(&pdev->dev, irq, NULL,
+ ab8500_usb_disconnect_irq,
+ IRQF_NO_SUSPEND | IRQF_SHARED,
+ "usb-vbus-fall", ab);
+ if (err < 0) {
+ dev_err(ab->dev, "request_irq failed for Vbus fall irq\n");
+ return err;
+ }
}
return 0;
}
+static void ab8500_usb_set_ab8500_tuning_values(struct ab8500_usb *ab)
+{
+ int err;
+
+ /* Enable the PBT/Bank 0x12 access */
+ err = abx500_set_register_interruptible(ab->dev,
+ AB8500_DEVELOPMENT, AB8500_BANK12_ACCESS, 0x01);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to enable bank12 access err=%d\n",
+ err);
+
+ err = abx500_set_register_interruptible(ab->dev,
+ AB8500_DEBUG, AB8500_USB_PHY_TUNE1, 0xC8);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to set PHY_TUNE1 register err=%d\n",
+ err);
+
+ err = abx500_set_register_interruptible(ab->dev,
+ AB8500_DEBUG, AB8500_USB_PHY_TUNE2, 0x00);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to set PHY_TUNE2 register err=%d\n",
+ err);
+
+ err = abx500_set_register_interruptible(ab->dev,
+ AB8500_DEBUG, AB8500_USB_PHY_TUNE3, 0x78);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to set PHY_TUNE3 regester err=%d\n",
+ err);
+
+ /* Switch to normal mode/disable Bank 0x12 access */
+ err = abx500_set_register_interruptible(ab->dev,
+ AB8500_DEVELOPMENT, AB8500_BANK12_ACCESS, 0x00);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to switch bank12 access err=%d\n",
+ err);
+}
+
+static void ab8500_usb_set_ab8505_tuning_values(struct ab8500_usb *ab)
+{
+ int err;
+
+ /* Enable the PBT/Bank 0x12 access */
+ err = abx500_mask_and_set_register_interruptible(ab->dev,
+ AB8500_DEVELOPMENT, AB8500_BANK12_ACCESS,
+ 0x01, 0x01);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to enable bank12 access err=%d\n",
+ err);
+
+ err = abx500_mask_and_set_register_interruptible(ab->dev,
+ AB8500_DEBUG, AB8500_USB_PHY_TUNE1,
+ 0xC8, 0xC8);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to set PHY_TUNE1 register err=%d\n",
+ err);
+
+ err = abx500_mask_and_set_register_interruptible(ab->dev,
+ AB8500_DEBUG, AB8500_USB_PHY_TUNE2,
+ 0x60, 0x60);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to set PHY_TUNE2 register err=%d\n",
+ err);
+
+ err = abx500_mask_and_set_register_interruptible(ab->dev,
+ AB8500_DEBUG, AB8500_USB_PHY_TUNE3,
+ 0xFC, 0x80);
+
+ if (err < 0)
+ dev_err(ab->dev, "Failed to set PHY_TUNE3 regester err=%d\n",
+ err);
+
+ /* Switch to normal mode/disable Bank 0x12 access */
+ err = abx500_mask_and_set_register_interruptible(ab->dev,
+ AB8500_DEVELOPMENT, AB8500_BANK12_ACCESS,
+ 0x00, 0x00);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to switch bank12 access err=%d\n",
+ err);
+}
+
+static void ab8500_usb_set_ab8540_tuning_values(struct ab8500_usb *ab)
+{
+ int err;
+
+ err = abx500_set_register_interruptible(ab->dev,
+ AB8540_DEBUG, AB8500_USB_PHY_TUNE1, 0xCC);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to set PHY_TUNE1 register ret=%d\n",
+ err);
+
+ err = abx500_set_register_interruptible(ab->dev,
+ AB8540_DEBUG, AB8500_USB_PHY_TUNE2, 0x60);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to set PHY_TUNE2 register ret=%d\n",
+ err);
+
+ err = abx500_set_register_interruptible(ab->dev,
+ AB8540_DEBUG, AB8500_USB_PHY_TUNE3, 0x90);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to set PHY_TUNE3 regester ret=%d\n",
+ err);
+}
+
+static void ab8500_usb_set_ab9540_tuning_values(struct ab8500_usb *ab)
+{
+ int err;
+
+ /* Enable the PBT/Bank 0x12 access */
+ err = abx500_set_register_interruptible(ab->dev,
+ AB8500_DEVELOPMENT, AB8500_BANK12_ACCESS, 0x01);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to enable bank12 access err=%d\n",
+ err);
+
+ err = abx500_set_register_interruptible(ab->dev,
+ AB8500_DEBUG, AB8500_USB_PHY_TUNE1, 0xC8);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to set PHY_TUNE1 register err=%d\n",
+ err);
+
+ err = abx500_set_register_interruptible(ab->dev,
+ AB8500_DEBUG, AB8500_USB_PHY_TUNE2, 0x60);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to set PHY_TUNE2 register err=%d\n",
+ err);
+
+ err = abx500_set_register_interruptible(ab->dev,
+ AB8500_DEBUG, AB8500_USB_PHY_TUNE3, 0x80);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to set PHY_TUNE3 regester err=%d\n",
+ err);
+
+ /* Switch to normal mode/disable Bank 0x12 access */
+ err = abx500_set_register_interruptible(ab->dev,
+ AB8500_DEVELOPMENT, AB8500_BANK12_ACCESS, 0x00);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to switch bank12 access err=%d\n",
+ err);
+}
+
static int ab8500_usb_probe(struct platform_device *pdev)
{
struct ab8500_usb *ab;
@@ -772,6 +1386,33 @@ static int ab8500_usb_probe(struct platform_device *pdev)
otg->set_host = ab8500_usb_set_host;
otg->set_peripheral = ab8500_usb_set_peripheral;
+ if (is_ab8500(ab->ab8500)) {
+ ab->flags |= AB8500_USB_FLAG_USE_LINK_STATUS_IRQ |
+ AB8500_USB_FLAG_USE_ID_WAKEUP_IRQ |
+ AB8500_USB_FLAG_USE_VBUS_DET_IRQ |
+ AB8500_USB_FLAG_REGULATOR_SET_VOLTAGE;
+ } else if (is_ab8505(ab->ab8500)) {
+ ab->flags |= AB8500_USB_FLAG_USE_LINK_STATUS_IRQ |
+ AB8500_USB_FLAG_USE_ID_WAKEUP_IRQ |
+ AB8500_USB_FLAG_USE_VBUS_DET_IRQ |
+ AB8500_USB_FLAG_REGULATOR_SET_VOLTAGE;
+ } else if (is_ab8540(ab->ab8500)) {
+ ab->flags |= AB8500_USB_FLAG_USE_LINK_STATUS_IRQ |
+ AB8500_USB_FLAG_USE_CHECK_VBUS_STATUS |
+ AB8500_USB_FLAG_USE_VBUS_HOST_QUIRK |
+ AB8500_USB_FLAG_REGULATOR_SET_VOLTAGE;
+ } else if (is_ab9540(ab->ab8500)) {
+ ab->flags |= AB8500_USB_FLAG_USE_LINK_STATUS_IRQ |
+ AB8500_USB_FLAG_REGULATOR_SET_VOLTAGE;
+ if (is_ab9540_2p0_or_earlier(ab->ab8500))
+ ab->flags |= AB8500_USB_FLAG_USE_ID_WAKEUP_IRQ |
+ AB8500_USB_FLAG_USE_VBUS_DET_IRQ;
+ }
+
+ /* Disable regulator voltage setting for AB8500 <= v2.0 */
+ if (is_ab8500_2p0_or_earlier(ab->ab8500))
+ ab->flags &= ~AB8500_USB_FLAG_REGULATOR_SET_VOLTAGE;
+
platform_set_drvdata(pdev, ab);
ATOMIC_INIT_NOTIFIER_HEAD(&ab->phy.notifier);
@@ -779,10 +1420,18 @@ static int ab8500_usb_probe(struct platform_device *pdev)
/* all: Disable phy when called from set_host and set_peripheral */
INIT_WORK(&ab->phy_dis_work, ab8500_usb_phy_disable_work);
+ INIT_WORK(&ab->vbus_event_work, ab8500_usb_vbus_turn_on_event_work);
+
err = ab8500_usb_regulator_get(ab);
if (err)
return err;
+ ab->sysclk = devm_clk_get(ab->dev, "sysclk");
+ if (IS_ERR(ab->sysclk)) {
+ dev_err(ab->dev, "Could not get sysclk.\n");
+ return PTR_ERR(ab->sysclk);
+ }
+
err = ab8500_usb_irq_setup(pdev, ab);
if (err < 0)
return err;
@@ -793,85 +1442,33 @@ static int ab8500_usb_probe(struct platform_device *pdev)
return err;
}
- /* Phy tuning values for AB8500 */
- if (!is_ab8500_2p0_or_earlier(ab->ab8500)) {
- /* Enable the PBT/Bank 0x12 access */
- err = abx500_set_register_interruptible(ab->dev,
- AB8500_DEVELOPMENT, AB8500_BANK12_ACCESS, 0x01);
- if (err < 0)
- dev_err(ab->dev, "Failed to enable bank12 access err=%d\n",
- err);
-
- err = abx500_set_register_interruptible(ab->dev,
- AB8500_DEBUG, AB8500_USB_PHY_TUNE1, 0xC8);
- if (err < 0)
- dev_err(ab->dev, "Failed to set PHY_TUNE1 register err=%d\n",
- err);
-
- err = abx500_set_register_interruptible(ab->dev,
- AB8500_DEBUG, AB8500_USB_PHY_TUNE2, 0x00);
- if (err < 0)
- dev_err(ab->dev, "Failed to set PHY_TUNE2 register err=%d\n",
- err);
-
- err = abx500_set_register_interruptible(ab->dev,
- AB8500_DEBUG, AB8500_USB_PHY_TUNE3, 0x78);
- if (err < 0)
- dev_err(ab->dev, "Failed to set PHY_TUNE3 regester err=%d\n",
- err);
-
- /* Switch to normal mode/disable Bank 0x12 access */
- err = abx500_set_register_interruptible(ab->dev,
- AB8500_DEVELOPMENT, AB8500_BANK12_ACCESS, 0x00);
- if (err < 0)
- dev_err(ab->dev, "Failed to switch bank12 access err=%d\n",
- err);
- }
-
- /* Phy tuning values for AB8505 */
- if (is_ab8505(ab->ab8500)) {
- /* Enable the PBT/Bank 0x12 access */
- err = abx500_mask_and_set_register_interruptible(ab->dev,
- AB8500_DEVELOPMENT, AB8500_BANK12_ACCESS,
- 0x01, 0x01);
- if (err < 0)
- dev_err(ab->dev, "Failed to enable bank12 access err=%d\n",
- err);
-
- err = abx500_mask_and_set_register_interruptible(ab->dev,
- AB8500_DEBUG, AB8500_USB_PHY_TUNE1,
- 0xC8, 0xC8);
- if (err < 0)
- dev_err(ab->dev, "Failed to set PHY_TUNE1 register err=%d\n",
- err);
-
- err = abx500_mask_and_set_register_interruptible(ab->dev,
- AB8500_DEBUG, AB8500_USB_PHY_TUNE2,
- 0x60, 0x60);
- if (err < 0)
- dev_err(ab->dev, "Failed to set PHY_TUNE2 register err=%d\n",
- err);
-
- err = abx500_mask_and_set_register_interruptible(ab->dev,
- AB8500_DEBUG, AB8500_USB_PHY_TUNE3,
- 0xFC, 0x80);
-
- if (err < 0)
- dev_err(ab->dev, "Failed to set PHY_TUNE3 regester err=%d\n",
- err);
-
- /* Switch to normal mode/disable Bank 0x12 access */
- err = abx500_mask_and_set_register_interruptible(ab->dev,
- AB8500_DEVELOPMENT, AB8500_BANK12_ACCESS,
- 0x00, 0x00);
- if (err < 0)
- dev_err(ab->dev, "Failed to switch bank12 access err=%d\n",
- err);
- }
+ if (is_ab8500(ab->ab8500) && !is_ab8500_2p0_or_earlier(ab->ab8500))
+ /* Phy tuning values for AB8500 > v2.0 */
+ ab8500_usb_set_ab8500_tuning_values(ab);
+ else if (is_ab8505(ab->ab8500))
+ /* Phy tuning values for AB8505 */
+ ab8500_usb_set_ab8505_tuning_values(ab);
+ else if (is_ab8540(ab->ab8500))
+ /* Phy tuning values for AB8540 */
+ ab8500_usb_set_ab8540_tuning_values(ab);
+ else if (is_ab9540(ab->ab8500))
+ /* Phy tuning values for AB9540 */
+ ab8500_usb_set_ab9540_tuning_values(ab);
/* Needed to enable ID detection. */
ab8500_usb_wd_workaround(ab);
+ /*
+ * This is required for usb-link-status to work properly when a
+ * cable is connected at boot time.
+ */
+ ab8500_usb_restart_phy(ab);
+
+ if (ab->flags & AB8500_USB_FLAG_USE_CHECK_VBUS_STATUS) {
+ if (ab8500_usb_check_vbus_status(ab))
+ schedule_work(&ab->vbus_event_work);
+ }
+
abx500_usb_link_status_update(ab);
dev_info(&pdev->dev, "revision 0x%2x driver initialized\n", rev);
@@ -884,6 +1481,7 @@ static int ab8500_usb_remove(struct platform_device *pdev)
struct ab8500_usb *ab = platform_get_drvdata(pdev);
cancel_work_sync(&ab->phy_dis_work);
+ cancel_work_sync(&ab->vbus_event_work);
usb_remove_phy(&ab->phy);
@@ -895,11 +1493,20 @@ static int ab8500_usb_remove(struct platform_device *pdev)
return 0;
}
+static struct platform_device_id ab8500_usb_devtype[] = {
+ { .name = "ab8500-usb", },
+ { .name = "ab8540-usb", },
+ { .name = "ab9540-usb", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(platform, ab8500_usb_devtype);
+
static struct platform_driver ab8500_usb_driver = {
.probe = ab8500_usb_probe,
.remove = ab8500_usb_remove,
+ .id_table = ab8500_usb_devtype,
.driver = {
- .name = "ab8500-usb",
+ .name = "abx5x0-usb",
.owner = THIS_MODULE,
},
};
@@ -916,7 +1523,6 @@ static void __exit ab8500_usb_exit(void)
}
module_exit(ab8500_usb_exit);
-MODULE_ALIAS("platform:ab8500_usb");
MODULE_AUTHOR("ST-Ericsson AB");
-MODULE_DESCRIPTION("AB8500 usb transceiver driver");
+MODULE_DESCRIPTION("AB8500 family usb transceiver driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c
index 749fbf41fb6..d08f33435e9 100644
--- a/drivers/usb/phy/phy-msm-usb.c
+++ b/drivers/usb/phy/phy-msm-usb.c
@@ -514,13 +514,13 @@ static int msm_otg_suspend(struct msm_otg *motg)
motg->pdata->otg_control == OTG_PMIC_CONTROL)
writel(readl(USB_PHY_CTRL) | PHY_RETEN, USB_PHY_CTRL);
- clk_disable(motg->pclk);
- clk_disable(motg->clk);
+ clk_disable_unprepare(motg->pclk);
+ clk_disable_unprepare(motg->clk);
if (motg->core_clk)
- clk_disable(motg->core_clk);
+ clk_disable_unprepare(motg->core_clk);
if (!IS_ERR(motg->pclk_src))
- clk_disable(motg->pclk_src);
+ clk_disable_unprepare(motg->pclk_src);
if (motg->pdata->phy_type == SNPS_28NM_INTEGRATED_PHY &&
motg->pdata->otg_control == OTG_PMIC_CONTROL) {
@@ -552,12 +552,12 @@ static int msm_otg_resume(struct msm_otg *motg)
return 0;
if (!IS_ERR(motg->pclk_src))
- clk_enable(motg->pclk_src);
+ clk_prepare_enable(motg->pclk_src);
- clk_enable(motg->pclk);
- clk_enable(motg->clk);
+ clk_prepare_enable(motg->pclk);
+ clk_prepare_enable(motg->clk);
if (motg->core_clk)
- clk_enable(motg->core_clk);
+ clk_prepare_enable(motg->core_clk);
if (motg->pdata->phy_type == SNPS_28NM_INTEGRATED_PHY &&
motg->pdata->otg_control == OTG_PMIC_CONTROL) {
@@ -1468,7 +1468,7 @@ static int __init msm_otg_probe(struct platform_device *pdev)
if (IS_ERR(motg->pclk_src))
goto put_clk;
clk_set_rate(motg->pclk_src, INT_MAX);
- clk_enable(motg->pclk_src);
+ clk_prepare_enable(motg->pclk_src);
} else
motg->pclk_src = ERR_PTR(-ENOENT);
@@ -1511,8 +1511,8 @@ static int __init msm_otg_probe(struct platform_device *pdev)
goto free_regs;
}
- clk_enable(motg->clk);
- clk_enable(motg->pclk);
+ clk_prepare_enable(motg->clk);
+ clk_prepare_enable(motg->pclk);
ret = msm_hsusb_init_vddcx(motg, 1);
if (ret) {
@@ -1532,7 +1532,7 @@ static int __init msm_otg_probe(struct platform_device *pdev)
}
if (motg->core_clk)
- clk_enable(motg->core_clk);
+ clk_prepare_enable(motg->core_clk);
writel(0, USB_USBINTR);
writel(0, USB_OTGSC);
@@ -1579,8 +1579,8 @@ static int __init msm_otg_probe(struct platform_device *pdev)
free_irq:
free_irq(motg->irq, motg);
disable_clks:
- clk_disable(motg->pclk);
- clk_disable(motg->clk);
+ clk_disable_unprepare(motg->pclk);
+ clk_disable_unprepare(motg->clk);
ldo_exit:
msm_hsusb_ldo_init(motg, 0);
vddcx_exit:
@@ -1593,7 +1593,7 @@ put_core_clk:
clk_put(motg->pclk);
put_pclk_src:
if (!IS_ERR(motg->pclk_src)) {
- clk_disable(motg->pclk_src);
+ clk_disable_unprepare(motg->pclk_src);
clk_put(motg->pclk_src);
}
put_clk:
@@ -1643,12 +1643,12 @@ static int msm_otg_remove(struct platform_device *pdev)
if (cnt >= PHY_SUSPEND_TIMEOUT_USEC)
dev_err(phy->dev, "Unable to suspend PHY\n");
- clk_disable(motg->pclk);
- clk_disable(motg->clk);
+ clk_disable_unprepare(motg->pclk);
+ clk_disable_unprepare(motg->clk);
if (motg->core_clk)
- clk_disable(motg->core_clk);
+ clk_disable_unprepare(motg->core_clk);
if (!IS_ERR(motg->pclk_src)) {
- clk_disable(motg->pclk_src);
+ clk_disable_unprepare(motg->pclk_src);
clk_put(motg->pclk_src);
}
msm_hsusb_ldo_init(motg, 0);
diff --git a/drivers/usb/phy/phy-nop.c b/drivers/usb/phy/phy-nop.c
index 638cc5dade3..55445e5d72e 100644
--- a/drivers/usb/phy/phy-nop.c
+++ b/drivers/usb/phy/phy-nop.c
@@ -270,7 +270,7 @@ static struct platform_driver nop_usb_xceiv_driver = {
.driver = {
.name = "nop_usb_xceiv",
.owner = THIS_MODULE,
- .of_match_table = of_match_ptr(nop_xceiv_dt_ids),
+ .of_match_table = nop_xceiv_dt_ids,
},
};
diff --git a/drivers/usb/phy/phy-omap-usb3.c b/drivers/usb/phy/phy-omap-usb3.c
index a6e60b1e102..efe6e1464f4 100644
--- a/drivers/usb/phy/phy-omap-usb3.c
+++ b/drivers/usb/phy/phy-omap-usb3.c
@@ -27,7 +27,7 @@
#include <linux/delay.h>
#include <linux/usb/omap_control_usb.h>
-#define NUM_SYS_CLKS 5
+#define NUM_SYS_CLKS 6
#define PLL_STATUS 0x00000004
#define PLL_GO 0x00000008
#define PLL_CONFIGURATION1 0x0000000C
@@ -62,6 +62,7 @@ enum sys_clk_rate {
CLK_RATE_12MHZ,
CLK_RATE_16MHZ,
CLK_RATE_19MHZ,
+ CLK_RATE_20MHZ,
CLK_RATE_26MHZ,
CLK_RATE_38MHZ
};
@@ -72,6 +73,8 @@ static struct usb_dpll_params omap_usb3_dpll_params[NUM_SYS_CLKS] = {
{1172, 8, 4, 20, 65537}, /* 19.2 MHz */
{1250, 12, 4, 20, 0}, /* 26 MHz */
{3125, 47, 4, 20, 92843}, /* 38.4 MHz */
+ {1000, 7, 4, 10, 0}, /* 20 MHz */
+
};
static int omap_usb3_suspend(struct usb_phy *x, int suspend)
@@ -122,6 +125,8 @@ static inline enum sys_clk_rate __get_sys_clk_index(unsigned long rate)
return CLK_RATE_16MHZ;
case 19200000:
return CLK_RATE_19MHZ;
+ case 20000000:
+ return CLK_RATE_20MHZ;
case 26000000:
return CLK_RATE_26MHZ;
case 38400000:
diff --git a/drivers/usb/phy/phy-rcar-usb.c b/drivers/usb/phy/phy-rcar-usb.c
index a35681b0c50..ae909408958 100644
--- a/drivers/usb/phy/phy-rcar-usb.c
+++ b/drivers/usb/phy/phy-rcar-usb.c
@@ -1,8 +1,9 @@
/*
* Renesas R-Car USB phy driver
*
- * Copyright (C) 2012 Renesas Solutions Corp.
+ * Copyright (C) 2012-2013 Renesas Solutions Corp.
* Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ * Copyright (C) 2013 Cogent Embedded, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -15,17 +16,41 @@
#include <linux/platform_device.h>
#include <linux/spinlock.h>
#include <linux/module.h>
-
-/* USBH common register */
-#define USBPCTRL0 0x0800
-#define USBPCTRL1 0x0804
-#define USBST 0x0808
-#define USBEH0 0x080C
-#define USBOH0 0x081C
-#define USBCTL0 0x0858
-#define EIIBC1 0x0094
-#define EIIBC2 0x009C
-
+#include <linux/platform_data/usb-rcar-phy.h>
+
+/* REGS block */
+#define USBPCTRL0 0x00
+#define USBPCTRL1 0x04
+#define USBST 0x08
+#define USBEH0 0x0C
+#define USBOH0 0x1C
+#define USBCTL0 0x58
+
+/* High-speed signal quality characteristic control registers (R8A7778 only) */
+#define HSQCTL1 0x24
+#define HSQCTL2 0x28
+
+/* USBPCTRL0 */
+#define OVC2 (1 << 10) /* (R8A7779 only) */
+ /* Switches the OVC input pin for port 2: */
+ /* 1: USB_OVC2, 0: OVC2 */
+#define OVC1_VBUS1 (1 << 9) /* Switches the OVC input pin for port 1: */
+ /* 1: USB_OVC1, 0: OVC1/VBUS1 */
+ /* Function mode: set to 0 */
+#define OVC0 (1 << 8) /* Switches the OVC input pin for port 0: */
+ /* 1: USB_OVC0 pin, 0: OVC0 */
+#define OVC2_ACT (1 << 6) /* (R8A7779 only) */
+ /* Host mode: OVC2 polarity: */
+ /* 1: active-high, 0: active-low */
+#define PENC (1 << 4) /* Function mode: output level of PENC1 pin: */
+ /* 1: high, 0: low */
+#define OVC0_ACT (1 << 3) /* Host mode: OVC0 polarity: */
+ /* 1: active-high, 0: active-low */
+#define OVC1_ACT (1 << 1) /* Host mode: OVC1 polarity: */
+ /* 1: active-high, 0: active-low */
+ /* Function mode: be sure to set to 1 */
+#define PORT1 (1 << 0) /* Selects port 1 mode: */
+ /* 1: function, 0: host */
/* USBPCTRL1 */
#define PHY_RST (1 << 2)
#define PLL_ENB (1 << 1)
@@ -58,8 +83,10 @@ static int rcar_usb_phy_init(struct usb_phy *phy)
{
struct rcar_usb_phy_priv *priv = usb_phy_to_priv(phy);
struct device *dev = phy->dev;
+ struct rcar_phy_platform_data *pdata = dev->platform_data;
void __iomem *reg0 = priv->reg0;
void __iomem *reg1 = priv->reg1;
+ static const u8 ovcn_act[] = { OVC0_ACT, OVC1_ACT, OVC2_ACT };
int i;
u32 val;
unsigned long flags;
@@ -77,7 +104,16 @@ static int rcar_usb_phy_init(struct usb_phy *phy)
/* (2) start USB-PHY internal PLL */
iowrite32(PHY_ENB | PLL_ENB, (reg0 + USBPCTRL1));
- /* (3) USB module status check */
+ /* (3) set USB-PHY in accord with the conditions of usage */
+ if (reg1) {
+ u32 hsqctl1 = pdata->ferrite_bead ? 0x41 : 0;
+ u32 hsqctl2 = pdata->ferrite_bead ? 0x0d : 7;
+
+ iowrite32(hsqctl1, reg1 + HSQCTL1);
+ iowrite32(hsqctl2, reg1 + HSQCTL2);
+ }
+
+ /* (4) USB module status check */
for (i = 0; i < 1024; i++) {
udelay(10);
val = ioread32(reg0 + USBST);
@@ -90,24 +126,24 @@ static int rcar_usb_phy_init(struct usb_phy *phy)
goto phy_init_end;
}
- /* (4) USB-PHY reset clear */
+ /* (5) USB-PHY reset clear */
iowrite32(PHY_ENB | PLL_ENB | PHY_RST, (reg0 + USBPCTRL1));
- /* set platform specific port settings */
- iowrite32(0x00000000, (reg0 + USBPCTRL0));
-
- /*
- * EHCI IP internal buffer setting
- * EHCI IP internal buffer enable
- *
- * These are recommended value of a datasheet
- * see [USB :: EHCI internal buffer setting]
- */
- iowrite32(0x00ff0040, (reg0 + EIIBC1));
- iowrite32(0x00ff0040, (reg1 + EIIBC1));
-
- iowrite32(0x00000001, (reg0 + EIIBC2));
- iowrite32(0x00000001, (reg1 + EIIBC2));
+ /* Board specific port settings */
+ val = 0;
+ if (pdata->port1_func)
+ val |= PORT1;
+ if (pdata->penc1)
+ val |= PENC;
+ for (i = 0; i < 3; i++) {
+ /* OVCn bits follow each other in the right order */
+ if (pdata->ovc_pin[i].select_3_3v)
+ val |= OVC0 << i;
+ /* OVCn_ACT bits are spaced by irregular intervals */
+ if (pdata->ovc_pin[i].active_high)
+ val |= ovcn_act[i];
+ }
+ iowrite32(val, (reg0 + USBPCTRL0));
/*
* Bus alignment settings
@@ -134,10 +170,8 @@ static void rcar_usb_phy_shutdown(struct usb_phy *phy)
spin_lock_irqsave(&priv->lock, flags);
- if (priv->counter-- == 1) { /* last user */
- iowrite32(0x00000000, (reg0 + USBPCTRL0));
+ if (priv->counter-- == 1) /* last user */
iowrite32(0x00000000, (reg0 + USBPCTRL1));
- }
spin_unlock_irqrestore(&priv->lock, flags);
}
@@ -147,27 +181,29 @@ static int rcar_usb_phy_probe(struct platform_device *pdev)
struct rcar_usb_phy_priv *priv;
struct resource *res0, *res1;
struct device *dev = &pdev->dev;
- void __iomem *reg0, *reg1;
+ void __iomem *reg0, *reg1 = NULL;
int ret;
+ if (!pdev->dev.platform_data) {
+ dev_err(dev, "No platform data\n");
+ return -EINVAL;
+ }
+
res0 = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- res1 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
- if (!res0 || !res1) {
+ if (!res0) {
dev_err(dev, "Not enough platform resources\n");
return -EINVAL;
}
- /*
- * CAUTION
- *
- * Because this phy address is also mapped under OHCI/EHCI address area,
- * this driver can't use devm_request_and_ioremap(dev, res) here
- */
- reg0 = devm_ioremap_nocache(dev, res0->start, resource_size(res0));
- reg1 = devm_ioremap_nocache(dev, res1->start, resource_size(res1));
- if (!reg0 || !reg1) {
- dev_err(dev, "ioremap error\n");
- return -ENOMEM;
+ reg0 = devm_ioremap_resource(dev, res0);
+ if (IS_ERR(reg0))
+ return PTR_ERR(reg0);
+
+ res1 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ if (res1) {
+ reg1 = devm_ioremap_resource(dev, res1);
+ if (IS_ERR(reg1))
+ return PTR_ERR(reg1);
}
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
diff --git a/drivers/usb/phy/phy-samsung-usb.c b/drivers/usb/phy/phy-samsung-usb.c
index 7b118ee5f5e..ac025ca0842 100644
--- a/drivers/usb/phy/phy-samsung-usb.c
+++ b/drivers/usb/phy/phy-samsung-usb.c
@@ -73,7 +73,7 @@ EXPORT_SYMBOL_GPL(samsung_usbphy_parse_dt);
* Here 'on = true' would mean USB PHY block is isolated, hence
* de-activated and vice-versa.
*/
-void samsung_usbphy_set_isolation(struct samsung_usbphy *sphy, bool on)
+void samsung_usbphy_set_isolation_4210(struct samsung_usbphy *sphy, bool on)
{
void __iomem *reg = NULL;
u32 reg_val;
@@ -84,32 +84,12 @@ void samsung_usbphy_set_isolation(struct samsung_usbphy *sphy, bool on)
return;
}
- switch (sphy->drv_data->cpu_type) {
- case TYPE_S3C64XX:
- /*
- * Do nothing: We will add here once S3C64xx goes for DT support
- */
- break;
- case TYPE_EXYNOS4210:
- /*
- * Fall through since exynos4210 and exynos5250 have similar
- * register architecture: two separate registers for host and
- * device phy control with enable bit at position 0.
- */
- case TYPE_EXYNOS5250:
- if (sphy->phy_type == USB_PHY_TYPE_DEVICE) {
- reg = sphy->pmuregs +
- sphy->drv_data->devphy_reg_offset;
- en_mask = sphy->drv_data->devphy_en_mask;
- } else if (sphy->phy_type == USB_PHY_TYPE_HOST) {
- reg = sphy->pmuregs +
- sphy->drv_data->hostphy_reg_offset;
- en_mask = sphy->drv_data->hostphy_en_mask;
- }
- break;
- default:
- dev_err(sphy->dev, "Invalid SoC type\n");
- return;
+ if (sphy->phy_type == USB_PHY_TYPE_DEVICE) {
+ reg = sphy->pmuregs + sphy->drv_data->devphy_reg_offset;
+ en_mask = sphy->drv_data->devphy_en_mask;
+ } else if (sphy->phy_type == USB_PHY_TYPE_HOST) {
+ reg = sphy->pmuregs + sphy->drv_data->hostphy_reg_offset;
+ en_mask = sphy->drv_data->hostphy_en_mask;
}
reg_val = readl(reg);
@@ -120,8 +100,13 @@ void samsung_usbphy_set_isolation(struct samsung_usbphy *sphy, bool on)
reg_val |= en_mask;
writel(reg_val, reg);
+
+ if (sphy->drv_data->cpu_type == TYPE_EXYNOS4X12) {
+ writel(reg_val, sphy->pmuregs + EXYNOS4X12_PHY_HSIC_CTRL0);
+ writel(reg_val, sphy->pmuregs + EXYNOS4X12_PHY_HSIC_CTRL1);
+ }
}
-EXPORT_SYMBOL_GPL(samsung_usbphy_set_isolation);
+EXPORT_SYMBOL_GPL(samsung_usbphy_set_isolation_4210);
/*
* Configure the mode of working of usb-phy here: HOST/DEVICE.
@@ -162,73 +147,93 @@ int samsung_usbphy_set_type(struct usb_phy *phy,
}
EXPORT_SYMBOL_GPL(samsung_usbphy_set_type);
+int samsung_usbphy_rate_to_clksel_64xx(struct samsung_usbphy *sphy,
+ unsigned long rate)
+{
+ unsigned int clksel;
+
+ switch (rate) {
+ case 12 * MHZ:
+ clksel = PHYCLK_CLKSEL_12M;
+ break;
+ case 24 * MHZ:
+ clksel = PHYCLK_CLKSEL_24M;
+ break;
+ case 48 * MHZ:
+ clksel = PHYCLK_CLKSEL_48M;
+ break;
+ default:
+ dev_err(sphy->dev,
+ "Invalid reference clock frequency: %lu\n", rate);
+ return -EINVAL;
+ }
+
+ return clksel;
+}
+EXPORT_SYMBOL_GPL(samsung_usbphy_rate_to_clksel_64xx);
+
+int samsung_usbphy_rate_to_clksel_4x12(struct samsung_usbphy *sphy,
+ unsigned long rate)
+{
+ unsigned int clksel;
+
+ switch (rate) {
+ case 9600 * KHZ:
+ clksel = FSEL_CLKSEL_9600K;
+ break;
+ case 10 * MHZ:
+ clksel = FSEL_CLKSEL_10M;
+ break;
+ case 12 * MHZ:
+ clksel = FSEL_CLKSEL_12M;
+ break;
+ case 19200 * KHZ:
+ clksel = FSEL_CLKSEL_19200K;
+ break;
+ case 20 * MHZ:
+ clksel = FSEL_CLKSEL_20M;
+ break;
+ case 24 * MHZ:
+ clksel = FSEL_CLKSEL_24M;
+ break;
+ case 50 * MHZ:
+ clksel = FSEL_CLKSEL_50M;
+ break;
+ default:
+ dev_err(sphy->dev,
+ "Invalid reference clock frequency: %lu\n", rate);
+ return -EINVAL;
+ }
+
+ return clksel;
+}
+EXPORT_SYMBOL_GPL(samsung_usbphy_rate_to_clksel_4x12);
+
/*
* Returns reference clock frequency selection value
*/
int samsung_usbphy_get_refclk_freq(struct samsung_usbphy *sphy)
{
struct clk *ref_clk;
- int refclk_freq = 0;
+ unsigned long rate;
+ int refclk_freq;
/*
* In exynos5250 USB host and device PHY use
* external crystal clock XXTI
*/
if (sphy->drv_data->cpu_type == TYPE_EXYNOS5250)
- ref_clk = devm_clk_get(sphy->dev, "ext_xtal");
+ ref_clk = clk_get(sphy->dev, "ext_xtal");
else
- ref_clk = devm_clk_get(sphy->dev, "xusbxti");
+ ref_clk = clk_get(sphy->dev, "xusbxti");
if (IS_ERR(ref_clk)) {
dev_err(sphy->dev, "Failed to get reference clock\n");
return PTR_ERR(ref_clk);
}
- if (sphy->drv_data->cpu_type == TYPE_EXYNOS5250) {
- /* set clock frequency for PLL */
- switch (clk_get_rate(ref_clk)) {
- case 9600 * KHZ:
- refclk_freq = FSEL_CLKSEL_9600K;
- break;
- case 10 * MHZ:
- refclk_freq = FSEL_CLKSEL_10M;
- break;
- case 12 * MHZ:
- refclk_freq = FSEL_CLKSEL_12M;
- break;
- case 19200 * KHZ:
- refclk_freq = FSEL_CLKSEL_19200K;
- break;
- case 20 * MHZ:
- refclk_freq = FSEL_CLKSEL_20M;
- break;
- case 50 * MHZ:
- refclk_freq = FSEL_CLKSEL_50M;
- break;
- case 24 * MHZ:
- default:
- /* default reference clock */
- refclk_freq = FSEL_CLKSEL_24M;
- break;
- }
- } else {
- switch (clk_get_rate(ref_clk)) {
- case 12 * MHZ:
- refclk_freq = PHYCLK_CLKSEL_12M;
- break;
- case 24 * MHZ:
- refclk_freq = PHYCLK_CLKSEL_24M;
- break;
- case 48 * MHZ:
- refclk_freq = PHYCLK_CLKSEL_48M;
- break;
- default:
- if (sphy->drv_data->cpu_type == TYPE_S3C64XX)
- refclk_freq = PHYCLK_CLKSEL_48M;
- else
- refclk_freq = PHYCLK_CLKSEL_24M;
- break;
- }
- }
+ rate = clk_get_rate(ref_clk);
+ refclk_freq = sphy->drv_data->rate_to_clksel(sphy, rate);
+
clk_put(ref_clk);
return refclk_freq;
diff --git a/drivers/usb/phy/phy-samsung-usb.h b/drivers/usb/phy/phy-samsung-usb.h
index 70a9cae5e37..68771bfd182 100644
--- a/drivers/usb/phy/phy-samsung-usb.h
+++ b/drivers/usb/phy/phy-samsung-usb.h
@@ -47,6 +47,16 @@
#define RSTCON_HLINK_SWRST (0x1 << 1)
#define RSTCON_SWRST (0x1 << 0)
+/* EXYNOS4X12 */
+#define EXYNOS4X12_PHY_HSIC_CTRL0 (0x04)
+#define EXYNOS4X12_PHY_HSIC_CTRL1 (0x08)
+
+#define PHYPWR_NORMAL_MASK_HSIC1 (0x7 << 12)
+#define PHYPWR_NORMAL_MASK_HSIC0 (0x7 << 9)
+#define PHYPWR_NORMAL_MASK_PHY1 (0x7 << 6)
+
+#define RSTCON_HOSTPHY_SWRST (0xf << 3)
+
/* EXYNOS5 */
#define EXYNOS5_PHY_HOST_CTRL0 (0x00)
@@ -241,9 +251,12 @@
enum samsung_cpu_type {
TYPE_S3C64XX,
TYPE_EXYNOS4210,
+ TYPE_EXYNOS4X12,
TYPE_EXYNOS5250,
};
+struct samsung_usbphy;
+
/*
* struct samsung_usbphy_drvdata - driver data for various SoC variants
* @cpu_type: machine identifier
@@ -268,6 +281,10 @@ struct samsung_usbphy_drvdata {
int hostphy_en_mask;
u32 devphy_reg_offset;
u32 hostphy_reg_offset;
+ int (*rate_to_clksel)(struct samsung_usbphy *, unsigned long);
+ void (*set_isolation)(struct samsung_usbphy *, bool);
+ void (*phy_enable)(struct samsung_usbphy *);
+ void (*phy_disable)(struct samsung_usbphy *);
};
/*
@@ -320,8 +337,13 @@ static inline const struct samsung_usbphy_drvdata
}
extern int samsung_usbphy_parse_dt(struct samsung_usbphy *sphy);
-extern void samsung_usbphy_set_isolation(struct samsung_usbphy *sphy, bool on);
+extern void samsung_usbphy_set_isolation_4210(struct samsung_usbphy *sphy,
+ bool on);
extern void samsung_usbphy_cfg_sel(struct samsung_usbphy *sphy);
extern int samsung_usbphy_set_type(struct usb_phy *phy,
enum samsung_usb_phy_type phy_type);
extern int samsung_usbphy_get_refclk_freq(struct samsung_usbphy *sphy);
+extern int samsung_usbphy_rate_to_clksel_64xx(struct samsung_usbphy *sphy,
+ unsigned long rate);
+extern int samsung_usbphy_rate_to_clksel_4x12(struct samsung_usbphy *sphy,
+ unsigned long rate);
diff --git a/drivers/usb/phy/phy-samsung-usb2.c b/drivers/usb/phy/phy-samsung-usb2.c
index 9d5e273abcc..1011c16ade7 100644
--- a/drivers/usb/phy/phy-samsung-usb2.c
+++ b/drivers/usb/phy/phy-samsung-usb2.c
@@ -176,6 +176,11 @@ static void samsung_usb2phy_enable(struct samsung_usbphy *sphy)
phypwr &= ~PHYPWR_NORMAL_MASK;
rstcon |= RSTCON_SWRST;
break;
+ case TYPE_EXYNOS4X12:
+ phypwr &= ~(PHYPWR_NORMAL_MASK_HSIC0 |
+ PHYPWR_NORMAL_MASK_HSIC1 |
+ PHYPWR_NORMAL_MASK_PHY1);
+ rstcon |= RSTCON_HOSTPHY_SWRST;
case TYPE_EXYNOS4210:
phypwr &= ~PHYPWR_NORMAL_MASK_PHY0;
rstcon |= RSTCON_SWRST;
@@ -189,6 +194,8 @@ static void samsung_usb2phy_enable(struct samsung_usbphy *sphy)
/* reset all ports of PHY and Link */
writel(rstcon, regs + SAMSUNG_RSTCON);
udelay(10);
+ if (sphy->drv_data->cpu_type == TYPE_EXYNOS4X12)
+ rstcon &= ~RSTCON_HOSTPHY_SWRST;
rstcon &= ~RSTCON_SWRST;
writel(rstcon, regs + SAMSUNG_RSTCON);
}
@@ -239,6 +246,10 @@ static void samsung_usb2phy_disable(struct samsung_usbphy *sphy)
case TYPE_S3C64XX:
phypwr |= PHYPWR_NORMAL_MASK;
break;
+ case TYPE_EXYNOS4X12:
+ phypwr |= (PHYPWR_NORMAL_MASK_HSIC0 |
+ PHYPWR_NORMAL_MASK_HSIC1 |
+ PHYPWR_NORMAL_MASK_PHY1);
case TYPE_EXYNOS4210:
phypwr |= PHYPWR_NORMAL_MASK_PHY0;
default:
@@ -284,17 +295,14 @@ static int samsung_usb2phy_init(struct usb_phy *phy)
/* Disable phy isolation */
if (sphy->plat && sphy->plat->pmu_isolation)
sphy->plat->pmu_isolation(false);
- else
- samsung_usbphy_set_isolation(sphy, false);
+ else if (sphy->drv_data->set_isolation)
+ sphy->drv_data->set_isolation(sphy, false);
/* Selecting Host/OTG mode; After reset USB2.0PHY_CFG: HOST */
samsung_usbphy_cfg_sel(sphy);
/* Initialize usb phy registers */
- if (sphy->drv_data->cpu_type == TYPE_EXYNOS5250)
- samsung_exynos5_usb2phy_enable(sphy);
- else
- samsung_usb2phy_enable(sphy);
+ sphy->drv_data->phy_enable(sphy);
spin_unlock_irqrestore(&sphy->lock, flags);
@@ -334,16 +342,13 @@ static void samsung_usb2phy_shutdown(struct usb_phy *phy)
}
/* De-initialize usb phy registers */
- if (sphy->drv_data->cpu_type == TYPE_EXYNOS5250)
- samsung_exynos5_usb2phy_disable(sphy);
- else
- samsung_usb2phy_disable(sphy);
+ sphy->drv_data->phy_disable(sphy);
/* Enable phy isolation */
if (sphy->plat && sphy->plat->pmu_isolation)
sphy->plat->pmu_isolation(true);
- else
- samsung_usbphy_set_isolation(sphy, true);
+ else if (sphy->drv_data->set_isolation)
+ sphy->drv_data->set_isolation(sphy, true);
spin_unlock_irqrestore(&sphy->lock, flags);
@@ -408,7 +413,10 @@ static int samsung_usb2phy_probe(struct platform_device *pdev)
sphy->phy.label = "samsung-usb2phy";
sphy->phy.init = samsung_usb2phy_init;
sphy->phy.shutdown = samsung_usb2phy_shutdown;
- sphy->ref_clk_freq = samsung_usbphy_get_refclk_freq(sphy);
+
+ sphy->ref_clk_freq = samsung_usbphy_get_refclk_freq(sphy);
+ if (sphy->ref_clk_freq < 0)
+ return -EINVAL;
sphy->phy.otg = otg;
sphy->phy.otg->phy = &sphy->phy;
@@ -438,18 +446,40 @@ static int samsung_usb2phy_remove(struct platform_device *pdev)
static const struct samsung_usbphy_drvdata usb2phy_s3c64xx = {
.cpu_type = TYPE_S3C64XX,
.devphy_en_mask = S3C64XX_USBPHY_ENABLE,
+ .rate_to_clksel = samsung_usbphy_rate_to_clksel_64xx,
+ .set_isolation = NULL, /* TODO */
+ .phy_enable = samsung_usb2phy_enable,
+ .phy_disable = samsung_usb2phy_disable,
};
static const struct samsung_usbphy_drvdata usb2phy_exynos4 = {
.cpu_type = TYPE_EXYNOS4210,
.devphy_en_mask = EXYNOS_USBPHY_ENABLE,
.hostphy_en_mask = EXYNOS_USBPHY_ENABLE,
+ .rate_to_clksel = samsung_usbphy_rate_to_clksel_64xx,
+ .set_isolation = samsung_usbphy_set_isolation_4210,
+ .phy_enable = samsung_usb2phy_enable,
+ .phy_disable = samsung_usb2phy_disable,
+};
+
+static const struct samsung_usbphy_drvdata usb2phy_exynos4x12 = {
+ .cpu_type = TYPE_EXYNOS4X12,
+ .devphy_en_mask = EXYNOS_USBPHY_ENABLE,
+ .hostphy_en_mask = EXYNOS_USBPHY_ENABLE,
+ .rate_to_clksel = samsung_usbphy_rate_to_clksel_4x12,
+ .set_isolation = samsung_usbphy_set_isolation_4210,
+ .phy_enable = samsung_usb2phy_enable,
+ .phy_disable = samsung_usb2phy_disable,
};
static struct samsung_usbphy_drvdata usb2phy_exynos5 = {
.cpu_type = TYPE_EXYNOS5250,
.hostphy_en_mask = EXYNOS_USBPHY_ENABLE,
.hostphy_reg_offset = EXYNOS_USBHOST_PHY_CTRL_OFFSET,
+ .rate_to_clksel = samsung_usbphy_rate_to_clksel_4x12,
+ .set_isolation = samsung_usbphy_set_isolation_4210,
+ .phy_enable = samsung_exynos5_usb2phy_enable,
+ .phy_disable = samsung_exynos5_usb2phy_disable,
};
#ifdef CONFIG_OF
@@ -461,6 +491,9 @@ static const struct of_device_id samsung_usbphy_dt_match[] = {
.compatible = "samsung,exynos4210-usb2phy",
.data = &usb2phy_exynos4,
}, {
+ .compatible = "samsung,exynos4x12-usb2phy",
+ .data = &usb2phy_exynos4x12,
+ }, {
.compatible = "samsung,exynos5250-usb2phy",
.data = &usb2phy_exynos5
},
@@ -477,6 +510,9 @@ static struct platform_device_id samsung_usbphy_driver_ids[] = {
.name = "exynos4210-usb2phy",
.driver_data = (unsigned long)&usb2phy_exynos4,
}, {
+ .name = "exynos4x12-usb2phy",
+ .driver_data = (unsigned long)&usb2phy_exynos4x12,
+ }, {
.name = "exynos5250-usb2phy",
.driver_data = (unsigned long)&usb2phy_exynos5,
},
diff --git a/drivers/usb/phy/phy-samsung-usb3.c b/drivers/usb/phy/phy-samsung-usb3.c
index 5a9efcbcb53..300e0cf5e31 100644
--- a/drivers/usb/phy/phy-samsung-usb3.c
+++ b/drivers/usb/phy/phy-samsung-usb3.c
@@ -65,7 +65,7 @@ static u32 samsung_usb3phy_set_refclk(struct samsung_usbphy *sphy)
return reg;
}
-static int samsung_exynos5_usb3phy_enable(struct samsung_usbphy *sphy)
+static void samsung_exynos5_usb3phy_enable(struct samsung_usbphy *sphy)
{
void __iomem *regs = sphy->regs;
u32 phyparam0;
@@ -133,8 +133,6 @@ static int samsung_exynos5_usb3phy_enable(struct samsung_usbphy *sphy)
phyclkrst &= ~(PHYCLKRST_PORTRESET);
writel(phyclkrst, regs + EXYNOS5_DRD_PHYCLKRST);
-
- return 0;
}
static void samsung_exynos5_usb3phy_disable(struct samsung_usbphy *sphy)
@@ -184,10 +182,11 @@ static int samsung_usb3phy_init(struct usb_phy *phy)
samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_DEVICE);
/* Disable phy isolation */
- samsung_usbphy_set_isolation(sphy, false);
+ if (sphy->drv_data->set_isolation)
+ sphy->drv_data->set_isolation(sphy, false);
/* Initialize usb phy registers */
- samsung_exynos5_usb3phy_enable(sphy);
+ sphy->drv_data->phy_enable(sphy);
spin_unlock_irqrestore(&sphy->lock, flags);
@@ -218,10 +217,11 @@ static void samsung_usb3phy_shutdown(struct usb_phy *phy)
samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_DEVICE);
/* De-initialize usb phy registers */
- samsung_exynos5_usb3phy_disable(sphy);
+ sphy->drv_data->phy_disable(sphy);
/* Enable phy isolation */
- samsung_usbphy_set_isolation(sphy, true);
+ if (sphy->drv_data->set_isolation)
+ sphy->drv_data->set_isolation(sphy, true);
spin_unlock_irqrestore(&sphy->lock, flags);
@@ -274,7 +274,10 @@ static int samsung_usb3phy_probe(struct platform_device *pdev)
sphy->phy.init = samsung_usb3phy_init;
sphy->phy.shutdown = samsung_usb3phy_shutdown;
sphy->drv_data = samsung_usbphy_get_driver_data(pdev);
- sphy->ref_clk_freq = samsung_usbphy_get_refclk_freq(sphy);
+
+ sphy->ref_clk_freq = samsung_usbphy_get_refclk_freq(sphy);
+ if (sphy->ref_clk_freq < 0)
+ return -EINVAL;
spin_lock_init(&sphy->lock);
@@ -300,6 +303,10 @@ static int samsung_usb3phy_remove(struct platform_device *pdev)
static struct samsung_usbphy_drvdata usb3phy_exynos5 = {
.cpu_type = TYPE_EXYNOS5250,
.devphy_en_mask = EXYNOS_USBPHY_ENABLE,
+ .rate_to_clksel = samsung_usbphy_rate_to_clksel_4x12,
+ .set_isolation = samsung_usbphy_set_isolation_4210,
+ .phy_enable = samsung_exynos5_usb3phy_enable,
+ .phy_disable = samsung_exynos5_usb3phy_disable,
};
#ifdef CONFIG_OF
diff --git a/drivers/usb/phy/phy-tegra-usb.c b/drivers/usb/phy/phy-tegra-usb.c
index 17d811292f3..cec0855ed24 100644
--- a/drivers/usb/phy/phy-tegra-usb.c
+++ b/drivers/usb/phy/phy-tegra-usb.c
@@ -1,9 +1,11 @@
/*
* Copyright (C) 2010 Google, Inc.
+ * Copyright (C) 2013 NVIDIA Corporation
*
* Author:
* Erik Gilling <konkers@google.com>
* Benoit Goby <benoit@android.com>
+ * Venu Byravarasu <vbyravarasu@nvidia.com>
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
@@ -21,6 +23,7 @@
#include <linux/slab.h>
#include <linux/err.h>
#include <linux/export.h>
+#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/gpio.h>
@@ -29,13 +32,19 @@
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
#include <asm/mach-types.h>
+#include <linux/usb/ehci_def.h>
#include <linux/usb/tegra_usb_phy.h>
-#define TEGRA_USB_BASE 0xC5000000
-#define TEGRA_USB_SIZE SZ_16K
-
#define ULPI_VIEWPORT 0x170
+/* PORTSC registers */
+#define TEGRA_USB_PORTSC1 0x184
+#define TEGRA_USB_PORTSC1_PTS(x) (((x) & 0x3) << 30)
+#define TEGRA_USB_PORTSC1_PHCD (1 << 23)
+
+/* Bits of PORTSC1, which will get cleared by writing 1 into them */
+#define TEGRA_PORTSC1_RWC_BITS (PORT_CSC | PORT_PEC | PORT_OCC)
+
#define USB_SUSP_CTRL 0x400
#define USB_WAKE_ON_CNNT_EN_DEV (1 << 3)
#define USB_WAKE_ON_DISCON_EN_DEV (1 << 4)
@@ -196,34 +205,41 @@ static struct tegra_utmip_config utmip_default[] = {
},
};
+static void set_pts(struct tegra_usb_phy *phy, u8 pts_val)
+{
+ void __iomem *base = phy->regs;
+ unsigned long val;
+
+ val = readl(base + TEGRA_USB_PORTSC1) & ~TEGRA_PORTSC1_RWC_BITS;
+ val &= ~TEGRA_USB_PORTSC1_PTS(3);
+ val |= TEGRA_USB_PORTSC1_PTS(pts_val & 3);
+ writel(val, base + TEGRA_USB_PORTSC1);
+}
+
+static void set_phcd(struct tegra_usb_phy *phy, bool enable)
+{
+ void __iomem *base = phy->regs;
+ unsigned long val;
+
+ val = readl(base + TEGRA_USB_PORTSC1) & ~TEGRA_PORTSC1_RWC_BITS;
+ if (enable)
+ val |= TEGRA_USB_PORTSC1_PHCD;
+ else
+ val &= ~TEGRA_USB_PORTSC1_PHCD;
+ writel(val, base + TEGRA_USB_PORTSC1);
+}
+
static int utmip_pad_open(struct tegra_usb_phy *phy)
{
- phy->pad_clk = clk_get_sys("utmip-pad", NULL);
+ phy->pad_clk = devm_clk_get(phy->dev, "utmi-pads");
if (IS_ERR(phy->pad_clk)) {
pr_err("%s: can't get utmip pad clock\n", __func__);
return PTR_ERR(phy->pad_clk);
}
- if (phy->is_legacy_phy) {
- phy->pad_regs = phy->regs;
- } else {
- phy->pad_regs = ioremap(TEGRA_USB_BASE, TEGRA_USB_SIZE);
- if (!phy->pad_regs) {
- pr_err("%s: can't remap usb registers\n", __func__);
- clk_put(phy->pad_clk);
- return -ENOMEM;
- }
- }
return 0;
}
-static void utmip_pad_close(struct tegra_usb_phy *phy)
-{
- if (!phy->is_legacy_phy)
- iounmap(phy->pad_regs);
- clk_put(phy->pad_clk);
-}
-
static void utmip_pad_power_on(struct tegra_usb_phy *phy)
{
unsigned long val, flags;
@@ -299,7 +315,7 @@ static void utmi_phy_clk_disable(struct tegra_usb_phy *phy)
val &= ~USB_SUSP_SET;
writel(val, base + USB_SUSP_CTRL);
} else
- phy->set_phcd(&phy->u_phy, true);
+ set_phcd(phy, true);
if (utmi_wait_register(base + USB_SUSP_CTRL, USB_PHY_CLK_VALID, 0) < 0)
pr_err("%s: timeout waiting for phy to stabilize\n", __func__);
@@ -321,7 +337,7 @@ static void utmi_phy_clk_enable(struct tegra_usb_phy *phy)
val &= ~USB_SUSP_CLR;
writel(val, base + USB_SUSP_CTRL);
} else
- phy->set_phcd(&phy->u_phy, false);
+ set_phcd(phy, false);
if (utmi_wait_register(base + USB_SUSP_CTRL, USB_PHY_CLK_VALID,
USB_PHY_CLK_VALID))
@@ -444,7 +460,7 @@ static int utmi_phy_power_on(struct tegra_usb_phy *phy)
utmi_phy_clk_enable(phy);
if (!phy->is_legacy_phy)
- phy->set_pts(&phy->u_phy, 0);
+ set_pts(phy, 0);
return 0;
}
@@ -541,11 +557,18 @@ static int ulpi_phy_power_on(struct tegra_usb_phy *phy)
int ret;
unsigned long val;
void __iomem *base = phy->regs;
- struct tegra_ulpi_config *config = phy->config;
- gpio_direction_output(config->reset_gpio, 0);
+ ret = gpio_direction_output(phy->reset_gpio, 0);
+ if (ret < 0) {
+ dev_err(phy->dev, "gpio %d not set to 0\n", phy->reset_gpio);
+ return ret;
+ }
msleep(5);
- gpio_direction_output(config->reset_gpio, 1);
+ ret = gpio_direction_output(phy->reset_gpio, 1);
+ if (ret < 0) {
+ dev_err(phy->dev, "gpio %d not set to 1\n", phy->reset_gpio);
+ return ret;
+ }
clk_prepare_enable(phy->clk);
msleep(1);
@@ -603,63 +626,15 @@ static int ulpi_phy_power_on(struct tegra_usb_phy *phy)
static int ulpi_phy_power_off(struct tegra_usb_phy *phy)
{
- struct tegra_ulpi_config *config = phy->config;
-
clk_disable(phy->clk);
- return gpio_direction_output(config->reset_gpio, 0);
-}
-
-static int tegra_phy_init(struct usb_phy *x)
-{
- struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy);
- struct tegra_ulpi_config *ulpi_config;
- int err;
-
- if (phy->is_ulpi_phy) {
- ulpi_config = phy->config;
- phy->clk = clk_get_sys(NULL, ulpi_config->clk);
- if (IS_ERR(phy->clk)) {
- pr_err("%s: can't get ulpi clock\n", __func__);
- err = -ENXIO;
- goto err1;
- }
- if (!gpio_is_valid(ulpi_config->reset_gpio))
- ulpi_config->reset_gpio =
- of_get_named_gpio(phy->dev->of_node,
- "nvidia,phy-reset-gpio", 0);
- if (!gpio_is_valid(ulpi_config->reset_gpio)) {
- pr_err("%s: invalid reset gpio: %d\n", __func__,
- ulpi_config->reset_gpio);
- err = -EINVAL;
- goto err1;
- }
- gpio_request(ulpi_config->reset_gpio, "ulpi_phy_reset_b");
- gpio_direction_output(ulpi_config->reset_gpio, 0);
- phy->ulpi = otg_ulpi_create(&ulpi_viewport_access_ops, 0);
- phy->ulpi->io_priv = phy->regs + ULPI_VIEWPORT;
- } else {
- err = utmip_pad_open(phy);
- if (err < 0)
- goto err1;
- }
- return 0;
-err1:
- clk_disable_unprepare(phy->pll_u);
- clk_put(phy->pll_u);
- return err;
+ return gpio_direction_output(phy->reset_gpio, 0);
}
static void tegra_usb_phy_close(struct usb_phy *x)
{
struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy);
- if (phy->is_ulpi_phy)
- clk_put(phy->clk);
- else
- utmip_pad_close(phy);
clk_disable_unprepare(phy->pll_u);
- clk_put(phy->pll_u);
- kfree(phy);
}
static int tegra_usb_phy_power_on(struct tegra_usb_phy *phy)
@@ -687,54 +662,63 @@ static int tegra_usb_phy_suspend(struct usb_phy *x, int suspend)
return tegra_usb_phy_power_on(phy);
}
-struct tegra_usb_phy *tegra_usb_phy_open(struct device *dev, int instance,
- void __iomem *regs, void *config, enum tegra_usb_phy_mode phy_mode,
- void (*set_pts)(struct usb_phy *x, u8 pts_val),
- void (*set_phcd)(struct usb_phy *x, bool enable))
+static int ulpi_open(struct tegra_usb_phy *phy)
+{
+ int err;
+
+ phy->clk = devm_clk_get(phy->dev, "ulpi-link");
+ if (IS_ERR(phy->clk)) {
+ pr_err("%s: can't get ulpi clock\n", __func__);
+ return PTR_ERR(phy->clk);
+ }
+
+ err = devm_gpio_request(phy->dev, phy->reset_gpio, "ulpi_phy_reset_b");
+ if (err < 0) {
+ dev_err(phy->dev, "request failed for gpio: %d\n",
+ phy->reset_gpio);
+ return err;
+ }
+
+ err = gpio_direction_output(phy->reset_gpio, 0);
+ if (err < 0) {
+ dev_err(phy->dev, "gpio %d direction not set to output\n",
+ phy->reset_gpio);
+ return err;
+ }
+
+ phy->ulpi = otg_ulpi_create(&ulpi_viewport_access_ops, 0);
+ if (!phy->ulpi) {
+ dev_err(phy->dev, "otg_ulpi_create returned NULL\n");
+ err = -ENOMEM;
+ return err;
+ }
+
+ phy->ulpi->io_priv = phy->regs + ULPI_VIEWPORT;
+ return 0;
+}
+static int tegra_usb_phy_init(struct tegra_usb_phy *phy)
{
- struct tegra_usb_phy *phy;
unsigned long parent_rate;
int i;
int err;
- struct device_node *np = dev->of_node;
-
- phy = kzalloc(sizeof(struct tegra_usb_phy), GFP_KERNEL);
- if (!phy)
- return ERR_PTR(-ENOMEM);
-
- phy->instance = instance;
- phy->regs = regs;
- phy->config = config;
- phy->mode = phy_mode;
- phy->dev = dev;
- phy->is_legacy_phy =
- of_property_read_bool(np, "nvidia,has-legacy-mode");
- phy->set_pts = set_pts;
- phy->set_phcd = set_phcd;
- err = of_property_match_string(np, "phy_type", "ulpi");
- if (err < 0)
- phy->is_ulpi_phy = false;
- else
- phy->is_ulpi_phy = true;
-
- if (!phy->config) {
- if (phy->is_ulpi_phy) {
- pr_err("%s: ulpi phy configuration missing", __func__);
- err = -EINVAL;
- goto err0;
- } else {
- phy->config = &utmip_default[instance];
- }
+
+ if (!phy->is_ulpi_phy) {
+ if (phy->is_legacy_phy)
+ phy->config = &utmip_default[0];
+ else
+ phy->config = &utmip_default[2];
}
- phy->pll_u = clk_get_sys(NULL, "pll_u");
+ phy->pll_u = devm_clk_get(phy->dev, "pll_u");
if (IS_ERR(phy->pll_u)) {
pr_err("Can't get pll_u clock\n");
- err = PTR_ERR(phy->pll_u);
- goto err0;
+ return PTR_ERR(phy->pll_u);
}
- clk_prepare_enable(phy->pll_u);
+
+ err = clk_prepare_enable(phy->pll_u);
+ if (err)
+ return err;
parent_rate = clk_get_rate(clk_get_parent(phy->pll_u));
for (i = 0; i < ARRAY_SIZE(tegra_freq_table); i++) {
@@ -746,23 +730,22 @@ struct tegra_usb_phy *tegra_usb_phy_open(struct device *dev, int instance,
if (!phy->freq) {
pr_err("invalid pll_u parent rate %ld\n", parent_rate);
err = -EINVAL;
- goto err1;
+ goto fail;
}
- phy->u_phy.init = tegra_phy_init;
- phy->u_phy.shutdown = tegra_usb_phy_close;
- phy->u_phy.set_suspend = tegra_usb_phy_suspend;
+ if (phy->is_ulpi_phy)
+ err = ulpi_open(phy);
+ else
+ err = utmip_pad_open(phy);
+ if (err < 0)
+ goto fail;
- return phy;
+ return 0;
-err1:
+fail:
clk_disable_unprepare(phy->pll_u);
- clk_put(phy->pll_u);
-err0:
- kfree(phy);
- return ERR_PTR(err);
+ return err;
}
-EXPORT_SYMBOL_GPL(tegra_usb_phy_open);
void tegra_usb_phy_preresume(struct usb_phy *x)
{
@@ -801,3 +784,124 @@ void tegra_ehci_phy_restore_end(struct usb_phy *x)
}
EXPORT_SYMBOL_GPL(tegra_ehci_phy_restore_end);
+static int tegra_usb_phy_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ struct tegra_usb_phy *tegra_phy = NULL;
+ struct device_node *np = pdev->dev.of_node;
+ int err;
+
+ tegra_phy = devm_kzalloc(&pdev->dev, sizeof(*tegra_phy), GFP_KERNEL);
+ if (!tegra_phy) {
+ dev_err(&pdev->dev, "unable to allocate memory for USB2 PHY\n");
+ return -ENOMEM;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "Failed to get I/O memory\n");
+ return -ENXIO;
+ }
+
+ tegra_phy->regs = devm_ioremap(&pdev->dev, res->start,
+ resource_size(res));
+ if (!tegra_phy->regs) {
+ dev_err(&pdev->dev, "Failed to remap I/O memory\n");
+ return -ENOMEM;
+ }
+
+ tegra_phy->is_legacy_phy =
+ of_property_read_bool(np, "nvidia,has-legacy-mode");
+
+ err = of_property_match_string(np, "phy_type", "ulpi");
+ if (err < 0) {
+ tegra_phy->is_ulpi_phy = false;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ if (!res) {
+ dev_err(&pdev->dev, "Failed to get UTMI Pad regs\n");
+ return -ENXIO;
+ }
+
+ tegra_phy->pad_regs = devm_ioremap(&pdev->dev, res->start,
+ resource_size(res));
+ if (!tegra_phy->regs) {
+ dev_err(&pdev->dev, "Failed to remap UTMI Pad regs\n");
+ return -ENOMEM;
+ }
+ } else {
+ tegra_phy->is_ulpi_phy = true;
+
+ tegra_phy->reset_gpio =
+ of_get_named_gpio(np, "nvidia,phy-reset-gpio", 0);
+ if (!gpio_is_valid(tegra_phy->reset_gpio)) {
+ dev_err(&pdev->dev, "invalid gpio: %d\n",
+ tegra_phy->reset_gpio);
+ return tegra_phy->reset_gpio;
+ }
+ }
+
+ err = of_property_match_string(np, "dr_mode", "otg");
+ if (err < 0) {
+ err = of_property_match_string(np, "dr_mode", "peripheral");
+ if (err < 0)
+ tegra_phy->mode = TEGRA_USB_PHY_MODE_HOST;
+ else
+ tegra_phy->mode = TEGRA_USB_PHY_MODE_DEVICE;
+ } else
+ tegra_phy->mode = TEGRA_USB_PHY_MODE_OTG;
+
+ tegra_phy->dev = &pdev->dev;
+ err = tegra_usb_phy_init(tegra_phy);
+ if (err < 0)
+ return err;
+
+ tegra_phy->u_phy.shutdown = tegra_usb_phy_close;
+ tegra_phy->u_phy.set_suspend = tegra_usb_phy_suspend;
+
+ dev_set_drvdata(&pdev->dev, tegra_phy);
+ return 0;
+}
+
+static struct of_device_id tegra_usb_phy_id_table[] = {
+ { .compatible = "nvidia,tegra20-usb-phy", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, tegra_usb_phy_id_table);
+
+static struct platform_driver tegra_usb_phy_driver = {
+ .probe = tegra_usb_phy_probe,
+ .driver = {
+ .name = "tegra-phy",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(tegra_usb_phy_id_table),
+ },
+};
+module_platform_driver(tegra_usb_phy_driver);
+
+static int tegra_usb_phy_match(struct device *dev, void *data)
+{
+ struct tegra_usb_phy *tegra_phy = dev_get_drvdata(dev);
+ struct device_node *dn = data;
+
+ return (tegra_phy->dev->of_node == dn) ? 1 : 0;
+}
+
+struct usb_phy *tegra_usb_get_phy(struct device_node *dn)
+{
+ struct device *dev;
+ struct tegra_usb_phy *tegra_phy;
+
+ dev = driver_find_device(&tegra_usb_phy_driver.driver, NULL, dn,
+ tegra_usb_phy_match);
+ if (!dev)
+ return ERR_PTR(-EPROBE_DEFER);
+
+ tegra_phy = dev_get_drvdata(dev);
+
+ return &tegra_phy->u_phy;
+}
+EXPORT_SYMBOL_GPL(tegra_usb_get_phy);
+
+MODULE_DESCRIPTION("Tegra USB PHY driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/phy/phy-ulpi-viewport.c b/drivers/usb/phy/phy-ulpi-viewport.c
index c5ba7e5423f..7c22a5390fc 100644
--- a/drivers/usb/phy/phy-ulpi-viewport.c
+++ b/drivers/usb/phy/phy-ulpi-viewport.c
@@ -12,6 +12,7 @@
*
*/
+#include <linux/export.h>
#include <linux/kernel.h>
#include <linux/usb.h>
#include <linux/io.h>
@@ -78,3 +79,4 @@ struct usb_phy_io_ops ulpi_viewport_access_ops = {
.read = ulpi_viewport_read,
.write = ulpi_viewport_write,
};
+EXPORT_SYMBOL_GPL(ulpi_viewport_access_ops);
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-25 21:51:37 +0000