1 files changed, 17 insertions, 17 deletions

diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c
index bb19f1c2e0d..b7eacad4d48 100644
--- a/drivers/usb/serial/belkin_sa.c
+++ b/drivers/usb/serial/belkin_sa.c
@@ -228,7 +228,7 @@ static int  belkin_sa_open(struct tty_struct *tty,
 	port->read_urb->dev = port->serial->dev;
 	retval = usb_submit_urb(port->read_urb, GFP_KERNEL);
 	if (retval) {
-		err("usb_submit_urb(read bulk) failed");
+		dev_err(&port->dev, "usb_submit_urb(read bulk) failed\n");
 		goto exit;
 	}
 
@@ -236,7 +236,7 @@ static int  belkin_sa_open(struct tty_struct *tty,
 	retval = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
 	if (retval) {
 		usb_kill_urb(port->read_urb);
-		err(" usb_submit_urb(read int) failed");
+		dev_err(&port->dev, "usb_submit_urb(read int) failed\n");
 	}
 
 exit:
@@ -342,8 +342,8 @@ static void belkin_sa_read_int_callback(struct urb *urb)
 exit:
 	retval = usb_submit_urb(urb, GFP_ATOMIC);
 	if (retval)
-		err("%s - usb_submit_urb failed with result %d",
-		     __func__, retval);
+		dev_err(&port->dev, "%s - usb_submit_urb failed with "
+			"result %d\n", __func__, retval);
 }
 
 static void belkin_sa_set_termios(struct tty_struct *tty,
@@ -382,12 +382,12 @@ static void belkin_sa_set_termios(struct tty_struct *tty,
 		if ((old_cflag & CBAUD) == B0) {
 			control_state |= (TIOCM_DTR|TIOCM_RTS);
 			if (BSA_USB_CMD(BELKIN_SA_SET_DTR_REQUEST, 1) < 0)
-				err("Set DTR error");
+				dev_err(&port->dev, "Set DTR error\n");
 			/* don't set RTS if using hardware flow control */
 			if (!(old_cflag & CRTSCTS))
 				if (BSA_USB_CMD(BELKIN_SA_SET_RTS_REQUEST
 								, 1) < 0)
-					err("Set RTS error");
+					dev_err(&port->dev, "Set RTS error\n");
 		}
 	}
 
@@ -403,18 +403,18 @@ static void belkin_sa_set_termios(struct tty_struct *tty,
 		/* Report the actual baud rate back to the caller */
 		tty_encode_baud_rate(tty, baud, baud);
 		if (BSA_USB_CMD(BELKIN_SA_SET_BAUDRATE_REQUEST, urb_value) < 0)
-			err("Set baudrate error");
+			dev_err(&port->dev, "Set baudrate error\n");
 	} else {
 		/* Disable flow control */
 		if (BSA_USB_CMD(BELKIN_SA_SET_FLOW_CTRL_REQUEST,
 						BELKIN_SA_FLOW_NONE) < 0)
-			err("Disable flowcontrol error");
+			dev_err(&port->dev, "Disable flowcontrol error\n");
 		/* Drop RTS and DTR */
 		control_state &= ~(TIOCM_DTR | TIOCM_RTS);
 		if (BSA_USB_CMD(BELKIN_SA_SET_DTR_REQUEST, 0) < 0)
-			err("DTR LOW error");
+			dev_err(&port->dev, "DTR LOW error\n");
 		if (BSA_USB_CMD(BELKIN_SA_SET_RTS_REQUEST, 0) < 0)
-			err("RTS LOW error");
+			dev_err(&port->dev, "RTS LOW error\n");
 	}
 
 	/* set the parity */
@@ -425,7 +425,7 @@ static void belkin_sa_set_termios(struct tty_struct *tty,
 		else
 			urb_value = BELKIN_SA_PARITY_NONE;
 		if (BSA_USB_CMD(BELKIN_SA_SET_PARITY_REQUEST, urb_value) < 0)
-			err("Set parity error");
+			dev_err(&port->dev, "Set parity error\n");
 	}
 
 	/* set the number of data bits */
@@ -448,7 +448,7 @@ static void belkin_sa_set_termios(struct tty_struct *tty,
 			break;
 		}
 		if (BSA_USB_CMD(BELKIN_SA_SET_DATA_BITS_REQUEST, urb_value) < 0)
-			err("Set data bits error");
+			dev_err(&port->dev, "Set data bits error\n");
 	}
 
 	/* set the number of stop bits */
@@ -457,7 +457,7 @@ static void belkin_sa_set_termios(struct tty_struct *tty,
 						: BELKIN_SA_STOP_BITS(1);
 		if (BSA_USB_CMD(BELKIN_SA_SET_STOP_BITS_REQUEST,
 							urb_value) < 0)
-			err("Set stop bits error");
+			dev_err(&port->dev, "Set stop bits error\n");
 	}
 
 	/* Set flow control */
@@ -478,7 +478,7 @@ static void belkin_sa_set_termios(struct tty_struct *tty,
 			urb_value &= ~(BELKIN_SA_FLOW_IRTS);
 
 		if (BSA_USB_CMD(BELKIN_SA_SET_FLOW_CTRL_REQUEST, urb_value) < 0)
-			err("Set flow control error");
+			dev_err(&port->dev, "Set flow control error\n");
 	}
 
 	/* save off the modified port settings */
@@ -494,7 +494,7 @@ static void belkin_sa_break_ctl(struct tty_struct *tty, int break_state)
 	struct usb_serial *serial = port->serial;
 
 	if (BSA_USB_CMD(BELKIN_SA_SET_BREAK_REQUEST, break_state ? 1 : 0) < 0)
-		err("Set break_ctl %d", break_state);
+		dev_err(&port->dev, "Set break_ctl %d\n", break_state);
 }
 
 
@@ -554,13 +554,13 @@ static int belkin_sa_tiocmset(struct tty_struct *tty, struct file *file,
 
 	retval = BSA_USB_CMD(BELKIN_SA_SET_RTS_REQUEST, rts);
 	if (retval < 0) {
-		err("Set RTS error %d", retval);
+		dev_err(&port->dev, "Set RTS error %d\n", retval);
 		goto exit;
 	}
 
 	retval = BSA_USB_CMD(BELKIN_SA_SET_DTR_REQUEST, dtr);
 	if (retval < 0) {
-		err("Set DTR error %d", retval);
+		dev_err(&port->dev, "Set DTR error %d\n", retval);
 		goto exit;
 	}
 exit: