1 files changed, 27 insertions, 42 deletions

diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c
index e831cb7f64f..33f6ee50b8d 100644
--- a/drivers/usb/serial/cp2101.c
+++ b/drivers/usb/serial/cp2101.c
@@ -356,7 +356,7 @@ static void cp2101_get_termios (struct usb_serial_port *port)
 
 	dbg("%s - port %d", __FUNCTION__, port->number);
 
-	if ((!port->tty) || (!port->tty->termios)) {
+	if (!port->tty || !port->tty->termios) {
 		dbg("%s - no tty structures", __FUNCTION__);
 		return;
 	}
@@ -526,50 +526,35 @@ static void cp2101_set_termios (struct usb_serial_port *port,
 		return;
 	}
 	cflag = port->tty->termios->c_cflag;
-
-	/* Check that they really want us to change something */
-	if (old_termios) {
-		if ((cflag == old_termios->c_cflag) &&
-				(RELEVANT_IFLAG(port->tty->termios->c_iflag)
-				== RELEVANT_IFLAG(old_termios->c_iflag))) {
-			dbg("%s - nothing to change...", __FUNCTION__);
-			return;
-		}
-
-		old_cflag = old_termios->c_cflag;
-	}
+	old_cflag = old_termios->c_cflag;
+	baud = tty_get_baud_rate(port->tty);
 
 	/* If the baud rate is to be updated*/
-	if ((cflag & CBAUD) != (old_cflag & CBAUD)) {
-		switch (cflag & CBAUD) {
-			/*
-			 * The baud rates which are commented out below
-			 * appear to be supported by the device
-			 * but are non-standard
-			 */
-			case B0:	baud = 0;	break;
-			case B600:	baud = 600;	break;
-			case B1200:	baud = 1200;	break;
-			case B1800:	baud = 1800;	break;
-			case B2400:	baud = 2400;	break;
-			case B4800:	baud = 4800;	break;
-			/*case B7200:	baud = 7200;	break;*/
-			case B9600:	baud = 9600;	break;
-			/*ase B14400:	baud = 14400;	break;*/
-			case B19200:	baud = 19200;	break;
-			/*case B28800:	baud = 28800;	break;*/
-			case B38400:	baud = 38400;	break;
-			/*case B55854:	baud = 55054;	break;*/
-			case B57600:	baud = 57600;	break;
-			case B115200:	baud = 115200;	break;
-			/*case B127117:	baud = 127117;	break;*/
-			case B230400:	baud = 230400;	break;
-			case B460800:	baud = 460800;	break;
-			case B921600:	baud = 921600;	break;
-			/*case B3686400:	baud = 3686400;	break;*/
+	if (baud != tty_termios_baud_rate(old_termios)) {
+		switch (baud) {
+			case 0:
+			case 600:
+			case 1200:
+			case 1800:
+			case 2400:
+			case 4800:
+			case 7200:
+			case 9600:
+			case 14400:
+			case 19200:
+			case 28800:
+			case 38400:
+			case 55854:
+			case 57600:
+			case 115200:
+			case 127117:
+			case 230400:
+			case 460800:
+			case 921600:
+			case 3686400:
+				break;
 			default:
-				dev_err(&port->dev, "cp2101 driver does not "
-					"support the baudrate requested\n");
+				baud = 9600;
 				break;
 		}